V4L/DVB (4632): Zoran: Implement pcipci failure check

We should be doing this on all devices doing PCI<->PCI DMA. We only set
the _FAIL ones when the DMA will fail or may cause crashes. This relies
on the PCIAGP_FAIL patch I sent to Andrew already
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

drivers/media/video/zoran_card.c

@@ -1621,10 +1621,10 @@ init_dc10_cards (void)
 	dprintk(5, KERN_DEBUG "Jotti is een held!\n");
 
 	/* some mainboards might not do PCI-PCI data transfer well */
-	if (pci_pci_problems & PCIPCI_FAIL) {
+	if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL|PCIPCI_ALIMAGIK)) {
 		dprintk(1,
 			KERN_WARNING
-			"%s: chipset may not support reliable PCI-PCI DMA\n",
+			"%s: chipset does not support reliable PCI-PCI DMA\n",
 			ZORAN_NAME);
 	}
 
@@ -1632,7 +1632,7 @@ init_dc10_cards (void)
 	for (i = 0; i < zoran_num; i++) {
 		struct zoran *zr = &zoran[i];
 
-		if (pci_pci_problems & PCIPCI_NATOMA && zr->revision <= 1) {
+		if ((pci_pci_problems & PCIPCI_NATOMA) && zr->revision <= 1) {
 			zr->jpg_buffers.need_contiguous = 1;
 			dprintk(1,
 				KERN_INFO

drivers/media/video/zoran_driver.c

@@ -1512,6 +1512,13 @@ setup_fbuffer (struct file               *file,
 	if (!capable(CAP_SYS_ADMIN) && !capable(CAP_SYS_RAWIO))
 		return -EPERM;
 
+	/* Don't allow frame buffer overlay if PCI or AGP is buggy, or on
+	   ALi Magik (that needs very low latency while the card needs a
+	   higher value always) */
+
+	if (pci_pci_problems & (PCIPCI_FAIL | PCIAGP_FAIL | PCIPCI_ALIMAGIK))
+		return -ENXIO;
+
 	/* we need a bytesperline value, even if not given */
 	if (!bytesperline)
 		bytesperline = width * ((fmt->depth + 7) & ~7) / 8;