Skip to content

L
linux
Commit e36ec859 authored by Dmytro Laktyushkin's avatar Dmytro Laktyushkin Committed by Alex Deucher
Browse files
Options

drm/amd/display: update dce_calcs to latest version 

Bw spreadsheet was updated while dce_calcs was not
Signed-off-by: default avatarDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: default avatarTony Cheng <Tony.Cheng@amd.com>
Acked-by: default avatarHarry Wentland <harry.wentland@amd.com>
Signed-off-by: default avatarAlex Deucher <alexander.deucher@amd.com>
parent 45bb8dd6
Hide whitespace changes
Inline Side-by-side
Showing with 110 additions and 56 deletions
drivers/gpu/drm/amd/display/dc/calcs/dce_calcs.c
View file @ e36ec859
......@@ -85,7 +85,6 @@ static void calculate_bandwidth(
const uint32_t s_mid5 = 5;
const uint32_t s_mid6 = 6;
const uint32_t s_high = 7;
const uint32_t bus_efficiency = 1;
const uint32_t dmif_chunk_buff_margin = 1;
uint32_t max_chunks_fbc_mode;
......@@ -592,7 +591,12 @@ static void calculate_bandwidth(
/* 1 = use channel 0 and 1*/
/* 2 = use channel 0,1,2,3*/
if ((fbc_enabled == 1 && lpt_enabled == 1)) {
data->dram_efficiency = bw_int_to_fixed(1);
if (vbios->memory_type == bw_def_hbm)
data->dram_efficiency = bw_frc_to_fixed(5, 10);
else
data->dram_efficiency = bw_int_to_fixed(1);
if (dceip->low_power_tiling_mode == 0) {
data->number_of_dram_channels = 1;
}
......@@ -607,7 +611,10 @@ static void calculate_bandwidth(
}
}
else {
data->dram_efficiency = bw_frc_to_fixed(8, 10);
if (vbios->memory_type == bw_def_hbm)
data->dram_efficiency = bw_frc_to_fixed(5, 10);
else
data->dram_efficiency = bw_frc_to_fixed(8, 10);
}
/*memory request size and latency hiding:*/
/*request size is normally 64 byte, 2-line interleaved, with full latency hiding*/
......@@ -1171,9 +1178,9 @@ static void calculate_bandwidth(
}
for (i = 0; i <= 2; i++) {
for (j = 0; j <= 7; j++) {
data->dmif_burst_time[i][j] = bw_max3(data->dmif_total_page_close_open_time, bw_div(data->total_display_reads_required_dram_access_data, (bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[i]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels)))), bw_div(data->total_display_reads_required_data, (bw_mul(bw_mul(sclk[j], vbios->data_return_bus_width), bw_int_to_fixed(bus_efficiency)))));
data->dmif_burst_time[i][j] = bw_max3(data->dmif_total_page_close_open_time, bw_div(data->total_display_reads_required_dram_access_data, (bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[i]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels)))), bw_div(data->total_display_reads_required_data, (bw_mul(bw_mul(sclk[j], vbios->data_return_bus_width), bw_frc_to_fixed(dceip->percent_of_ideal_port_bw_received_after_urgent_latency, 100)))));
if (data->d1_display_write_back_dwb_enable == 1) {
data->mcifwr_burst_time[i][j] = bw_max3(data->mcifwr_total_page_close_open_time, bw_div(data->total_display_writes_required_dram_access_data, (bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[i]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_wrchannels)))), bw_div(data->total_display_writes_required_data, (bw_mul(bw_mul(sclk[j], vbios->data_return_bus_width), bw_int_to_fixed(bus_efficiency)))));
data->mcifwr_burst_time[i][j] = bw_max3(data->mcifwr_total_page_close_open_time, bw_div(data->total_display_writes_required_dram_access_data, (bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[i]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_wrchannels)))), bw_div(data->total_display_writes_required_data, (bw_mul(sclk[j], vbios->data_return_bus_width))));
}
}
}
......@@ -1258,6 +1265,16 @@ static void calculate_bandwidth(
/* / (dispclk - display bw)*/
/*the minimum latency hiding is the minimum for all pipes of one screen line time, plus one more line time if doing lb prefetch, plus the dmif data buffer size equivalent in time, minus the urgent latency.*/
/*the minimum latency hiding is further limited by the cursor. the cursor latency hiding is the number of lines of the cursor buffer, minus one if the downscaling is less than two, or minus three if it is more*/
/*initialize variables*/
number_of_displays_enabled = 0;
number_of_displays_enabled_with_margin = 0;
for (k = 0; k <= maximum_number_of_surfaces - 1; k++) {
if (data->enable[k]) {
number_of_displays_enabled = number_of_displays_enabled + 1;
}
data->display_pstate_change_enable[k] = 0;
}
for (i = 0; i <= maximum_number_of_surfaces - 1; i++) {
if (data->enable[i]) {
if ((bw_equ(dceip->stutter_and_dram_clock_state_change_gated_before_cursor, bw_int_to_fixed(0)) && bw_mtn(data->cursor_width_pixels[i], bw_int_to_fixed(0)))) {
......@@ -1276,7 +1293,10 @@ static void calculate_bandwidth(
for (i = 0; i <= maximum_number_of_surfaces - 1; i++) {
if (data->enable[i]) {
if (dceip->graphics_lb_nodownscaling_multi_line_prefetching == 1 && (bw_equ(data->vsr[i], bw_int_to_fixed(1)) || (bw_leq(data->vsr[i], bw_frc_to_fixed(8, 10)) && bw_leq(data->v_taps[i], bw_int_to_fixed(2)) && data->lb_bpc[i] == 8)) && surface_type[i] == bw_def_graphics) {
data->minimum_latency_hiding[i] = bw_sub(bw_div(bw_mul((bw_div((bw_add(bw_sub(data->lb_partitions[i], bw_int_to_fixed(1)), bw_div(bw_div(data->data_buffer_size[i], bw_int_to_fixed(data->bytes_per_pixel[i])), data->source_width_pixels[i]))), data->vsr[i])), data->h_total[i]), data->pixel_rate[i]), data->total_dmifmc_urgent_latency);
if (number_of_displays_enabled > 2)
data->minimum_latency_hiding[i] = bw_sub(bw_div(bw_mul((bw_div((bw_add(bw_sub(data->lb_partitions[i], bw_int_to_fixed(2)), bw_div(bw_div(data->data_buffer_size[i], bw_int_to_fixed(data->bytes_per_pixel[i])), data->source_width_pixels[i]))), data->vsr[i])), data->h_total[i]), data->pixel_rate[i]), data->total_dmifmc_urgent_latency);
else
data->minimum_latency_hiding[i] = bw_sub(bw_div(bw_mul((bw_div((bw_add(bw_sub(data->lb_partitions[i], bw_int_to_fixed(1)), bw_div(bw_div(data->data_buffer_size[i], bw_int_to_fixed(data->bytes_per_pixel[i])), data->source_width_pixels[i]))), data->vsr[i])), data->h_total[i]), data->pixel_rate[i]), data->total_dmifmc_urgent_latency);
}
else {
data->minimum_latency_hiding[i] = bw_sub(bw_div(bw_mul((bw_div((bw_add(bw_int_to_fixed(1 + data->line_buffer_prefetch[i]), bw_div(bw_div(data->data_buffer_size[i], bw_int_to_fixed(data->bytes_per_pixel[i])), data->source_width_pixels[i]))), data->vsr[i])), data->h_total[i]), data->pixel_rate[i]), data->total_dmifmc_urgent_latency);
......@@ -1338,24 +1358,15 @@ static void calculate_bandwidth(
for (i = 0; i <= maximum_number_of_surfaces - 1; i++) {
if (data->enable[i]) {
if (dceip->graphics_lb_nodownscaling_multi_line_prefetching == 1) {
data->maximum_latency_hiding[i] = bw_add(data->minimum_latency_hiding[i], bw_mul(bw_frc_to_fixed(8, 10), data->total_dmifmc_urgent_latency));
data->maximum_latency_hiding[i] = bw_add(data->minimum_latency_hiding[i], bw_mul(bw_frc_to_fixed(5, 10), data->total_dmifmc_urgent_latency));
}
else {
/*maximum_latency_hiding(i) = minimum_latency_hiding(i) + 1 / vsr(i) * h_total(i) / pixel_rate(i) + 0.5 * total_dmifmc_urgent_latency*/
data->maximum_latency_hiding[i] = bw_add(data->minimum_latency_hiding[i], bw_mul(bw_frc_to_fixed(8, 10), data->total_dmifmc_urgent_latency));
data->maximum_latency_hiding[i] = bw_add(data->minimum_latency_hiding[i], bw_mul(bw_frc_to_fixed(5, 10), data->total_dmifmc_urgent_latency));
}
data->maximum_latency_hiding_with_cursor[i] = bw_min2(data->maximum_latency_hiding[i], data->cursor_latency_hiding[i]);
}
}
/*initialize variables*/
number_of_displays_enabled = 0;
number_of_displays_enabled_with_margin = 0;
for (k = 0; k <= maximum_number_of_surfaces - 1; k++) {
if (data->enable[k]) {
number_of_displays_enabled = number_of_displays_enabled + 1;
}
data->display_pstate_change_enable[k] = 0;
}
for (i = 0; i <= 2; i++) {
for (j = 0; j <= 7; j++) {
data->min_dram_speed_change_margin[i][j] = bw_int_to_fixed(9999);
......@@ -1370,10 +1381,11 @@ static void calculate_bandwidth(
/*determine the minimum dram clock change margin for each set of clock frequencies*/
data->min_dram_speed_change_margin[i][j] = bw_min2(data->min_dram_speed_change_margin[i][j], data->dram_speed_change_margin);
/*compute the maximum clock frequuency required for the dram clock change at each set of clock frequencies*/
data->dispclk_required_for_dram_speed_change[i][j] = bw_max3(data->dispclk_required_for_dram_speed_change[i][j], bw_div(bw_div(bw_mul(data->src_pixels_for_first_output_pixel[k], dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk), (bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k], vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]), data->dram_speed_change_line_source_transfer_time[k][i][j]))), bw_div(bw_div(bw_mul(data->src_pixels_for_last_output_pixel[k], dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk), (bw_add(bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k], vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]), data->dram_speed_change_line_source_transfer_time[k][i][j]), data->active_time[k]))));
if ((bw_ltn(data->dispclk_required_for_dram_speed_change[i][j], vbios->high_voltage_max_dispclk))) {
data->dispclk_required_for_dram_speed_change_pipe[i][j] = bw_max2(bw_div(bw_div(bw_mul(data->src_pixels_for_first_output_pixel[k], dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk), (bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k], vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]), data->dram_speed_change_line_source_transfer_time[k][i][j]))), bw_div(bw_div(bw_mul(data->src_pixels_for_last_output_pixel[k], dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk), (bw_add(bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k], vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]), data->dram_speed_change_line_source_transfer_time[k][i][j]), data->active_time[k]))));
if ((bw_ltn(data->dispclk_required_for_dram_speed_change_pipe[i][j], vbios->high_voltage_max_dispclk))) {
data->display_pstate_change_enable[k] = 1;
data->num_displays_with_margin[i][j] = data->num_displays_with_margin[i][j] + 1;
data->dispclk_required_for_dram_speed_change[i][j] = bw_max2(data->dispclk_required_for_dram_speed_change[i][j], data->dispclk_required_for_dram_speed_change_pipe[i][j]);
}
}
}
......@@ -1383,10 +1395,11 @@ static void calculate_bandwidth(
/*determine the minimum dram clock change margin for each display pipe*/
data->min_dram_speed_change_margin[i][j] = bw_min2(data->min_dram_speed_change_margin[i][j], data->dram_speed_change_margin);
/*compute the maximum clock frequuency required for the dram clock change at each set of clock frequencies*/
data->dispclk_required_for_dram_speed_change[i][j] = bw_max3(data->dispclk_required_for_dram_speed_change[i][j], bw_div(bw_div(bw_mul(data->src_pixels_for_first_output_pixel[k], dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk), (bw_sub(bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k], vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]), data->dram_speed_change_line_source_transfer_time[k][i][j]), data->mcifwr_burst_time[i][j]))), bw_div(bw_div(bw_mul(data->src_pixels_for_last_output_pixel[k], dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk), (bw_add(bw_sub(bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k], vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]), data->dram_speed_change_line_source_transfer_time[k][i][j]), data->mcifwr_burst_time[i][j]), data->active_time[k]))));
if ((bw_ltn(data->dispclk_required_for_dram_speed_change[i][j], vbios->high_voltage_max_dispclk))) {
data->dispclk_required_for_dram_speed_change_pipe[i][j] = bw_max2(bw_div(bw_div(bw_mul(data->src_pixels_for_first_output_pixel[k], dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk), (bw_sub(bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k], vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]), data->dram_speed_change_line_source_transfer_time[k][i][j]), data->mcifwr_burst_time[i][j]))), bw_div(bw_div(bw_mul(data->src_pixels_for_last_output_pixel[k], dceip->display_pipe_throughput_factor), dceip->lb_write_pixels_per_dispclk), (bw_add(bw_sub(bw_sub(bw_sub(bw_sub(data->maximum_latency_hiding_with_cursor[k], vbios->nbp_state_change_latency), data->dmif_burst_time[i][j]), data->dram_speed_change_line_source_transfer_time[k][i][j]), data->mcifwr_burst_time[i][j]), data->active_time[k]))));
if ((bw_ltn(data->dispclk_required_for_dram_speed_change_pipe[i][j], vbios->high_voltage_max_dispclk))) {
data->display_pstate_change_enable[k] = 1;
data->num_displays_with_margin[i][j] = data->num_displays_with_margin[i][j] + 1;
data->dispclk_required_for_dram_speed_change[i][j] = bw_max2(data->dispclk_required_for_dram_speed_change[i][j], data->dispclk_required_for_dram_speed_change_pipe[i][j]);
}
}
}
......@@ -1420,7 +1433,7 @@ static void calculate_bandwidth(
data->displays_with_same_mode[i] = bw_int_to_fixed(0);
if (data->enable[i] == 1 && data->display_pstate_change_enable[i] == 0 && bw_mtn(data->v_blank_dram_speed_change_margin[i], bw_int_to_fixed(0))) {
for (j = 0; j <= maximum_number_of_surfaces - 1; j++) {
if ((data->enable[j] == 1 && bw_equ(data->source_width_rounded_up_to_chunks[i], data->source_width_rounded_up_to_chunks[j]) && bw_equ(data->source_height_rounded_up_to_chunks[i], data->source_height_rounded_up_to_chunks[j]) && bw_equ(data->vsr[i], data->vsr[j]) && bw_equ(data->hsr[i], data->hsr[j]) && bw_equ(data->pixel_rate[i], data->pixel_rate[j]))) {
if ((i == j || data->display_synchronization_enabled) && (data->enable[j] == 1 && bw_equ(data->source_width_rounded_up_to_chunks[i], data->source_width_rounded_up_to_chunks[j]) && bw_equ(data->source_height_rounded_up_to_chunks[i], data->source_height_rounded_up_to_chunks[j]) && bw_equ(data->vsr[i], data->vsr[j]) && bw_equ(data->hsr[i], data->hsr[j]) && bw_equ(data->pixel_rate[i], data->pixel_rate[j]))) {
data->displays_with_same_mode[i] = bw_add(data->displays_with_same_mode[i], bw_int_to_fixed(1));
}
}
......@@ -1435,7 +1448,7 @@ static void calculate_bandwidth(
/*aligned displays with the same timing.*/
/*the display(s) with the negative margin can be switched in the v_blank region while the other*/
/*displays are in v_blank or v_active.*/
if ((number_of_displays_enabled_with_margin + number_of_aligned_displays_with_no_margin == number_of_displays_enabled && bw_mtn(data->min_dram_speed_change_margin[high][s_high], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[high][s_high], bw_int_to_fixed(9999)) && bw_ltn(data->dispclk_required_for_dram_speed_change[high][s_high], vbios->high_voltage_max_dispclk))) {
if (number_of_displays_enabled_with_margin > 0 && (number_of_displays_enabled_with_margin + number_of_aligned_displays_with_no_margin) == number_of_displays_enabled && bw_mtn(data->min_dram_speed_change_margin[high][s_high], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[high][s_high], bw_int_to_fixed(9999)) && bw_ltn(data->dispclk_required_for_dram_speed_change[high][s_high], vbios->high_voltage_max_dispclk)) {
data->nbp_state_change_enable = bw_def_yes;
}
else {
......@@ -1448,6 +1461,25 @@ static void calculate_bandwidth(
else {
nbp_state_change_enable_blank = bw_def_no;
}
/*average bandwidth*/
/*the average bandwidth with no compression is the vertical active time is the source width times the bytes per pixel divided by the line time, multiplied by the vertical scale ratio and the ratio of bytes per request divided by the useful bytes per request.*/
/*the average bandwidth with compression is the same, divided by the compression ratio*/
for (i = 0; i <= maximum_number_of_surfaces - 1; i++) {
if (data->enable[i]) {
data->average_bandwidth_no_compression[i] = bw_div(bw_mul(bw_mul(bw_div(bw_mul(data->source_width_rounded_up_to_chunks[i], bw_int_to_fixed(data->bytes_per_pixel[i])), (bw_div(data->h_total[i], data->pixel_rate[i]))), data->vsr[i]), data->bytes_per_request[i]), data->useful_bytes_per_request[i]);
data->average_bandwidth[i] = bw_div(data->average_bandwidth_no_compression[i], data->compression_rate[i]);
}
}
data->total_average_bandwidth_no_compression = bw_int_to_fixed(0);
data->total_average_bandwidth = bw_int_to_fixed(0);
for (i = 0; i <= maximum_number_of_surfaces - 1; i++) {
if (data->enable[i]) {
data->total_average_bandwidth_no_compression = bw_add(data->total_average_bandwidth_no_compression, data->average_bandwidth_no_compression[i]);
data->total_average_bandwidth = bw_add(data->total_average_bandwidth, data->average_bandwidth[i]);
}
}
/*required yclk(pclk)*/
/*yclk requirement only makes sense if the dmif and mcifwr data total page close-open time is less than the time for data transfer and the total pte requests fit in the scatter-gather saw queque size*/
/*if that is the case, the yclk requirement is the maximum of the ones required by dmif and mcifwr, and the high/low yclk(pclk) is chosen accordingly*/
......@@ -1497,17 +1529,20 @@ static void calculate_bandwidth(
}
else {
data->required_dram_bandwidth_gbyte_per_second = bw_div(bw_max2(data->dmif_required_dram_bandwidth, data->mcifwr_required_dram_bandwidth), bw_int_to_fixed(1000));
if (bw_ltn(bw_mul(data->required_dram_bandwidth_gbyte_per_second, bw_int_to_fixed(1000)), bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[low]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels))) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[low][s_high], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[low][s_high], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[low][s_high], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[low][s_high], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[low][s_high], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[low][s_high], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[low][s_high], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[low][s_high], vbios->high_voltage_max_dispclk) && data->num_displays_with_margin[low][s_high] == number_of_displays_enabled_with_margin))) {
if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation, 100),yclk[low]),bw_div(bw_int_to_fixed(vbios->dram_channel_width_in_bits),bw_int_to_fixed(8))),bw_int_to_fixed(vbios->number_of_dram_channels)))
&& bw_ltn(bw_mul(data->required_dram_bandwidth_gbyte_per_second, bw_int_to_fixed(1000)), bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[low]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels))) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[low][s_high], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[low][s_high], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[low][s_high], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[low][s_high], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[low][s_high], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[low][s_high], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[low][s_high], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[low][s_high], vbios->high_voltage_max_dispclk) && data->num_displays_with_margin[low][s_high] == number_of_displays_enabled_with_margin))) {
yclk_message = bw_fixed_to_int(vbios->low_yclk);
data->y_clk_level = low;
data->dram_bandwidth = bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[low]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels));
}
else if (bw_ltn(bw_mul(data->required_dram_bandwidth_gbyte_per_second, bw_int_to_fixed(1000)), bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[mid]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels))) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[mid][s_high], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[mid][s_high], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[mid][s_high], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[mid][s_high], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[mid][s_high], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[mid][s_high], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[mid][s_high], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[mid][s_high], vbios->high_voltage_max_dispclk) && data->num_displays_with_margin[mid][s_high] == number_of_displays_enabled_with_margin))) {
else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation, 100),yclk[mid]),bw_div(bw_int_to_fixed(vbios->dram_channel_width_in_bits),bw_int_to_fixed(8))),bw_int_to_fixed(vbios->number_of_dram_channels)))
&& bw_ltn(bw_mul(data->required_dram_bandwidth_gbyte_per_second, bw_int_to_fixed(1000)), bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[mid]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels))) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[mid][s_high], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[mid][s_high], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[mid][s_high], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[mid][s_high], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[mid][s_high], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[mid][s_high], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[mid][s_high], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[mid][s_high], vbios->high_voltage_max_dispclk) && data->num_displays_with_margin[mid][s_high] == number_of_displays_enabled_with_margin))) {
yclk_message = bw_fixed_to_int(vbios->mid_yclk);
data->y_clk_level = mid;
data->dram_bandwidth = bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[mid]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels));
}
else if (bw_ltn(bw_mul(data->required_dram_bandwidth_gbyte_per_second, bw_int_to_fixed(1000)), bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[high]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels)))) {
else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation, 100),yclk[high]),bw_div(bw_int_to_fixed(vbios->dram_channel_width_in_bits),bw_int_to_fixed(8))),bw_int_to_fixed(vbios->number_of_dram_channels)))
&& bw_ltn(bw_mul(data->required_dram_bandwidth_gbyte_per_second, bw_int_to_fixed(1000)), bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[high]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels)))) {
yclk_message = bw_fixed_to_int(vbios->high_yclk);
data->y_clk_level = high;
data->dram_bandwidth = bw_mul(bw_div(bw_mul(bw_mul(data->dram_efficiency, yclk[high]), bw_int_to_fixed(vbios->dram_channel_width_in_bits)), bw_int_to_fixed(8)), bw_int_to_fixed(data->number_of_dram_channels));
......@@ -1523,8 +1558,8 @@ static void calculate_bandwidth(
/*if that is the case, the sclk requirement is the maximum of the ones required by dmif and mcifwr, and the high/mid/low sclk is chosen accordingly, unless that choice results in foresaking dram speed/nb p-state change.*/
/*the dmif and mcifwr sclk required is the one that allows the transfer of all pipe's data buffer size through the sclk bus in the time for data transfer*/
/*for dmif, pte and cursor requests have to be included.*/
data->dmif_required_sclk = bw_div(bw_div(data->total_display_reads_required_data, data->display_reads_time_for_data_transfer), (bw_mul(vbios->data_return_bus_width, bw_int_to_fixed(bus_efficiency))));
data->mcifwr_required_sclk = bw_div(bw_div(data->total_display_writes_required_data, data->display_writes_time_for_data_transfer), (bw_mul(vbios->data_return_bus_width, bw_int_to_fixed(bus_efficiency))));
data->dmif_required_sclk = bw_div(bw_div(data->total_display_reads_required_data, data->display_reads_time_for_data_transfer), (bw_mul(vbios->data_return_bus_width, bw_frc_to_fixed(dceip->percent_of_ideal_port_bw_received_after_urgent_latency, 100))));
data->mcifwr_required_sclk = bw_div(bw_div(data->total_display_writes_required_data, data->display_writes_time_for_data_transfer), vbios->data_return_bus_width);
if (bw_mtn(data->scatter_gather_total_pte_requests, dceip->maximum_total_outstanding_pte_requests_allowed_by_saw)) {
data->required_sclk = bw_int_to_fixed(9999);
sclk_message = bw_def_exceeded_allowed_outstanding_pte_req_queue_size;
......@@ -1537,42 +1572,56 @@ static void calculate_bandwidth(
}
else {
data->required_sclk = bw_max2(data->dmif_required_sclk, data->mcifwr_required_sclk);
if (bw_ltn(data->required_sclk, sclk[s_low]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_low], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_low], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_low], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_low], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_low], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_low], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_low], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_low], vbios->low_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_low] == number_of_displays_enabled_with_margin))) {
if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[low]),vbios->data_return_bus_width))
&& bw_ltn(data->required_sclk, sclk[s_low]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_low], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_low], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_low], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_low], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_low], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_low], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_low], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_low], vbios->low_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_low] == number_of_displays_enabled_with_margin))) {
sclk_message = bw_def_low;
data->sclk_level = s_low;
data->required_sclk = vbios->low_sclk;
}
else if (bw_ltn(data->required_sclk, sclk[s_mid1]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid1], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid1], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid1], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid1], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid1], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid1], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid1], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid1], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid1] == number_of_displays_enabled_with_margin))) {
else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[mid]),vbios->data_return_bus_width))
&& bw_ltn(data->required_sclk, sclk[s_mid1]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid1], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid1], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid1], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid1], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid1], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid1], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid1], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid1], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid1] == number_of_displays_enabled_with_margin))) {
sclk_message = bw_def_mid;
data->sclk_level = s_mid1;
data->required_sclk = vbios->mid1_sclk;
}
else if (bw_ltn(data->required_sclk, sclk[s_mid2]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid2], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid2], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid2], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid2], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid2], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid2], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid2], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid2], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid2] == number_of_displays_enabled_with_margin))) {
else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[s_mid2]),vbios->data_return_bus_width))
&& bw_ltn(data->required_sclk, sclk[s_mid2]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid2], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid2], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid2], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid2], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid2], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid2], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid2], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid2], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid2] == number_of_displays_enabled_with_margin))) {
sclk_message = bw_def_mid;
data->sclk_level = s_mid2;
data->required_sclk = vbios->mid2_sclk;
}
else if (bw_ltn(data->required_sclk, sclk[s_mid3]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid3], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid3], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid3], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid3], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid3], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid3], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid3], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid3], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid3] == number_of_displays_enabled_with_margin))) {
else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[s_mid3]),vbios->data_return_bus_width))
&& bw_ltn(data->required_sclk, sclk[s_mid3]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid3], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid3], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid3], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid3], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid3], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid3], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid3], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid3], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid3] == number_of_displays_enabled_with_margin))) {
sclk_message = bw_def_mid;
data->sclk_level = s_mid3;
data->required_sclk = vbios->mid3_sclk;
}
else if (bw_ltn(data->required_sclk, sclk[s_mid4]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid4], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid4], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid4], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid4], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid4], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid4], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid4], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid4], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid4] == number_of_displays_enabled_with_margin))) {
else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[s_mid4]),vbios->data_return_bus_width))
&& bw_ltn(data->required_sclk, sclk[s_mid4]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid4], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid4], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid4], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid4], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid4], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid4], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid4], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid4], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid4] == number_of_displays_enabled_with_margin))) {
sclk_message = bw_def_mid;
data->sclk_level = s_mid4;
data->required_sclk = vbios->mid4_sclk;
}
else if (bw_ltn(data->required_sclk, sclk[s_mid5]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid5], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid5], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid5], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid5], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid5], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid5], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid5], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid5], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid5] == number_of_displays_enabled_with_margin))) {
else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[s_mid5]),vbios->data_return_bus_width))
&& bw_ltn(data->required_sclk, sclk[s_mid5]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid5], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid5], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid5], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid5], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid5], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid5], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid5], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid5], vbios->mid_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid5] == number_of_displays_enabled_with_margin))) {
sclk_message = bw_def_mid;
data->sclk_level = s_mid5;
data->required_sclk = vbios->mid5_sclk;
}
else if (bw_ltn(data->required_sclk, sclk[s_mid6]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid6], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid6], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid6], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid6], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid6], vbios->high_voltage_max_dispclk))) && (data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid6], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid6], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid6], vbios->high_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid6] == number_of_displays_enabled_with_margin))) {
else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[s_mid6]),vbios->data_return_bus_width))
&& bw_ltn(data->required_sclk, sclk[s_mid6]) && (data->cpup_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid6], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid6], vbios->high_voltage_max_dispclk))) && (data->cpuc_state_change_enable == bw_def_no || (bw_mtn(data->blackout_duration_margin[data->y_clk_level][s_mid6], bw_int_to_fixed(0)) && bw_ltn(data->dispclk_required_for_blackout_duration[data->y_clk_level][s_mid6], vbios->high_voltage_max_dispclk) && bw_ltn(data->dispclk_required_for_blackout_recovery[data->y_clk_level][s_mid6], vbios->high_voltage_max_dispclk))) && (!data->increase_voltage_to_support_mclk_switch || data->nbp_state_change_enable == bw_def_no || (bw_mtn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid6], bw_int_to_fixed(0)) && bw_ltn(data->min_dram_speed_change_margin[data->y_clk_level][s_mid6], bw_int_to_fixed(9999)) && bw_leq(data->dispclk_required_for_dram_speed_change[data->y_clk_level][s_mid6], vbios->high_voltage_max_dispclk) && data->num_displays_with_margin[data->y_clk_level][s_mid6] == number_of_displays_enabled_with_margin))) {
sclk_message = bw_def_mid;
data->sclk_level = s_mid6;
data->required_sclk = vbios->mid6_sclk;
}
else if (bw_ltn(data->required_sclk, sclk[s_high])) {
else if (bw_ltn(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[s_high]),vbios->data_return_bus_width))
&& bw_ltn(data->required_sclk, sclk[s_high])) {
sclk_message = bw_def_high;
data->sclk_level = s_high;
data->required_sclk = vbios->high_sclk;
}
else if (bw_meq(data->total_average_bandwidth_no_compression, bw_mul(bw_mul(bw_frc_to_fixed(dceip->max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation, 100),sclk[s_high]),vbios->data_return_bus_width))
&& bw_ltn(data->required_sclk, sclk[s_high])) {
sclk_message = bw_def_high;
data->sclk_level = s_high;
data->required_sclk = vbios->high_sclk;
......@@ -1681,7 +1730,7 @@ static void calculate_bandwidth(
data->total_dispclk_required_with_ramping_with_request_bandwidth = bw_max2(data->total_dispclk_required_with_ramping_with_request_bandwidth, data->dispclk_required_for_blackout_duration[data->y_clk_level][data->sclk_level]);
data->total_dispclk_required_without_ramping_with_request_bandwidth = bw_max2(data->total_dispclk_required_without_ramping_with_request_bandwidth, data->dispclk_required_for_blackout_duration[data->y_clk_level][data->sclk_level]);
}
if (data->nbp_state_change_enable == bw_def_yes) {
if (data->nbp_state_change_enable == bw_def_yes && data->increase_voltage_to_support_mclk_switch) {
data->total_dispclk_required_with_ramping_with_request_bandwidth = bw_max2(data->total_dispclk_required_with_ramping_with_request_bandwidth, data->dispclk_required_for_dram_speed_change[data->y_clk_level][data->sclk_level]);
data->total_dispclk_required_without_ramping_with_request_bandwidth = bw_max2(data->total_dispclk_required_without_ramping_with_request_bandwidth, data->dispclk_required_for_dram_speed_change[data->y_clk_level][data->sclk_level]);
}
......@@ -1861,23 +1910,6 @@ static void calculate_bandwidth(
else {
data->mcifwrdram_access_efficiency = bw_int_to_fixed(0);
}
/*average bandwidth*/
/*the average bandwidth with no compression is the vertical active time is the source width times the bytes per pixel divided by the line time, multiplied by the vertical scale ratio and the ratio of bytes per request divided by the useful bytes per request.*/
/*the average bandwidth with compression is the same, divided by the compression ratio*/
for (i = 0; i <= maximum_number_of_surfaces - 1; i++) {
if (data->enable[i]) {
data->average_bandwidth_no_compression[i] = bw_div(bw_mul(bw_mul(bw_div(bw_mul(data->source_width_rounded_up_to_chunks[i], bw_int_to_fixed(data->bytes_per_pixel[i])), (bw_div(data->h_total[i], data->pixel_rate[i]))), data->vsr[i]), data->bytes_per_request[i]), data->useful_bytes_per_request[i]);
data->average_bandwidth[i] = bw_div(data->average_bandwidth_no_compression[i], data->compression_rate[i]);
}
}
data->total_average_bandwidth_no_compression = bw_int_to_fixed(0);
data->total_average_bandwidth = bw_int_to_fixed(0);
for (i = 0; i <= maximum_number_of_surfaces - 1; i++) {
if (data->enable[i]) {
data->total_average_bandwidth_no_compression = bw_add(data->total_average_bandwidth_no_compression, data->average_bandwidth_no_compression[i]);
data->total_average_bandwidth = bw_add(data->total_average_bandwidth, data->average_bandwidth[i]);
}
}
/*stutter efficiency*/
/*the stutter efficiency is the frame-average time in self-refresh divided by the frame-average stutter cycle duration. only applies if the display write-back is not enabled.*/
/*the frame-average stutter cycle used is the minimum for all pipes of the frame-average data buffer size in time, times the compression rate*/
......@@ -1905,7 +1937,7 @@ static void calculate_bandwidth(
data->total_stutter_dmif_buffer_size = bw_fixed_to_int(bw_add(data->stutter_dmif_buffer_size[i], bw_int_to_fixed(data->total_stutter_dmif_buffer_size)));
}
}
data->stutter_burst_time = bw_div(bw_int_to_fixed(data->total_stutter_dmif_buffer_size), bw_min2(bw_mul(data->dram_bandwidth, data->dmifdram_access_efficiency), bw_mul(sclk[data->sclk_level], bw_int_to_fixed(32))));
data->stutter_burst_time = bw_div(bw_int_to_fixed(data->total_stutter_dmif_buffer_size), bw_mul(sclk[data->sclk_level], vbios->data_return_bus_width));
data->num_stutter_bursts = data->total_bytes_requested / data->min_stutter_dmif_buffer_size;
data->total_stutter_cycle_duration = bw_add(bw_add(data->min_stutter_refresh_duration, vbios->stutter_self_refresh_exit_latency), data->stutter_burst_time);
data->time_in_self_refresh = data->min_stutter_refresh_duration;
......@@ -1957,7 +1989,7 @@ static void calculate_bandwidth(
for (i = 1; i <= 5; i++) {
data->display_reads_time_for_data_transfer_and_urgent_latency = bw_sub(data->min_read_buffer_size_in_time, bw_mul(data->total_dmifmc_urgent_trips, bw_int_to_fixed(i)));
if (pipe_check == bw_def_ok && (bw_mtn(data->display_reads_time_for_data_transfer_and_urgent_latency, data->dmif_total_page_close_open_time))) {
data->dmif_required_sclk_for_urgent_latency[i] = bw_div(bw_div(data->total_display_reads_required_data, data->display_reads_time_for_data_transfer_and_urgent_latency), (bw_mul(vbios->data_return_bus_width, bw_int_to_fixed(bus_efficiency))));
data->dmif_required_sclk_for_urgent_latency[i] = bw_div(bw_div(data->total_display_reads_required_data, data->display_reads_time_for_data_transfer_and_urgent_latency), (bw_mul(vbios->data_return_bus_width, bw_frc_to_fixed(dceip->percent_of_ideal_port_bw_received_after_urgent_latency, 100))));
}
else {
data->dmif_required_sclk_for_urgent_latency[i] = bw_int_to_fixed(bw_def_na);
......@@ -2036,6 +2068,9 @@ void bw_calcs_init(struct bw_calcs_dceip *bw_dceip,
vbios.blackout_duration = bw_int_to_fixed(0); /* us */
vbios.maximum_blackout_recovery_time = bw_int_to_fixed(0);
dceip.max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation = 100;
dceip.max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation = 100;
dceip.percent_of_ideal_port_bw_received_after_urgent_latency = 100;
dceip.large_cursor = false;
dceip.dmif_request_buffer_size = bw_int_to_fixed(768);
dceip.dmif_pipe_en_fbc_chunk_tracker = false;
......@@ -2146,6 +2181,9 @@ void bw_calcs_init(struct bw_calcs_dceip *bw_dceip,
vbios.blackout_duration = bw_int_to_fixed(0); /* us */
vbios.maximum_blackout_recovery_time = bw_int_to_fixed(0);
dceip.max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation = 100;
dceip.max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation = 100;
dceip.percent_of_ideal_port_bw_received_after_urgent_latency = 100;
dceip.large_cursor = false;
dceip.dmif_request_buffer_size = bw_int_to_fixed(768);
dceip.dmif_pipe_en_fbc_chunk_tracker = false;
......@@ -2259,6 +2297,9 @@ void bw_calcs_init(struct bw_calcs_dceip *bw_dceip,
vbios.blackout_duration = bw_int_to_fixed(0); /* us */
vbios.maximum_blackout_recovery_time = bw_int_to_fixed(0);
dceip.max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation = 100;
dceip.max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation = 100;
dceip.percent_of_ideal_port_bw_received_after_urgent_latency = 100;
dceip.large_cursor = false;
dceip.dmif_request_buffer_size = bw_int_to_fixed(768);
dceip.dmif_pipe_en_fbc_chunk_tracker = false;
......@@ -2369,6 +2410,9 @@ void bw_calcs_init(struct bw_calcs_dceip *bw_dceip,
vbios.blackout_duration = bw_int_to_fixed(0); /* us */
vbios.maximum_blackout_recovery_time = bw_int_to_fixed(0);
dceip.max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation = 100;
dceip.max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation = 100;
dceip.percent_of_ideal_port_bw_received_after_urgent_latency = 100;
dceip.large_cursor = false;
dceip.dmif_request_buffer_size = bw_int_to_fixed(768);
dceip.dmif_pipe_en_fbc_chunk_tracker = false;
......@@ -2479,6 +2523,9 @@ void bw_calcs_init(struct bw_calcs_dceip *bw_dceip,
vbios.blackout_duration = bw_int_to_fixed(0); /* us */
vbios.maximum_blackout_recovery_time = bw_int_to_fixed(0);
dceip.max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation = 100;
dceip.max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation = 100;
dceip.percent_of_ideal_port_bw_received_after_urgent_latency = 100;
dceip.large_cursor = false;
dceip.dmif_request_buffer_size = bw_int_to_fixed(2304);
dceip.dmif_pipe_en_fbc_chunk_tracker = true;
......@@ -2597,6 +2644,7 @@ static void populate_initial_data(
data->graphics_tiling_mode = bw_def_tiled;
data->underlay_micro_tile_mode = bw_def_display_micro_tiling;
data->graphics_micro_tile_mode = bw_def_display_micro_tiling;
data->increase_voltage_to_support_mclk_switch = true;
/* Pipes with underlay first */
for (i = 0; i < pipe_count; i++) {
......
drivers/gpu/drm/amd/display/dc/inc/dce_calcs.h
View file @ e36ec859
......@@ -130,6 +130,9 @@ enum bw_defines {
struct bw_calcs_dceip {
enum bw_calcs_version version;
uint32_t percent_of_ideal_port_bw_received_after_urgent_latency;
uint32_t max_average_percent_of_ideal_port_bw_display_can_use_in_normal_system_operation;
uint32_t max_average_percent_of_ideal_drambw_display_can_use_in_normal_system_operation;
bool large_cursor;
uint32_t cursor_max_outstanding_group_num;
bool dmif_pipe_en_fbc_chunk_tracker;
......@@ -230,6 +233,7 @@ struct bw_calcs_vbios {
struct bw_calcs_data {
/* data for all displays */
bool display_synchronization_enabled;
uint32_t number_of_displays;
enum bw_defines underlay_surface_type;
enum bw_defines panning_and_bezel_adjustment;
......@@ -241,6 +245,7 @@ struct bw_calcs_data {
bool d1_display_write_back_dwb_enable;
enum bw_defines d1_underlay_mode;
bool increase_voltage_to_support_mclk_switch;
bool cpup_state_change_enable;
bool cpuc_state_change_enable;
bool nbp_state_change_enable;
......@@ -449,6 +454,7 @@ struct bw_calcs_data {
struct bw_fixed dram_speed_change_line_source_transfer_time[maximum_number_of_surfaces][3][8];
struct bw_fixed min_dram_speed_change_margin[3][8];
struct bw_fixed dispclk_required_for_dram_speed_change[3][8];
struct bw_fixed dispclk_required_for_dram_speed_change_pipe[3][8];
struct bw_fixed blackout_duration_margin[3][8];
struct bw_fixed dispclk_required_for_blackout_duration[3][8];
struct bw_fixed dispclk_required_for_blackout_recovery[3][8];
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7