Commit e399835c authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  MIPS: Avoid spurious make includecheck message
  MIPS: VPE: Get rid of BKL.
  MIPS: VPE: Fix build after the credential changes a while ago.
  MIPS: Excite: Get rid of BKL.
  MIPS: Sibyte: Get rid of BKL.
  MIPS: BCM63xx: Add PCMCIA & Cardbus support.
  MIPS: MSP71xx: request_irq() failure ignored in msp_pcibios_config_access()
  MIPS: Decrease size of au1xxx_dbdma_pm_regs[][]
  MIPS: SMP: Inline arch_send_call_function_{single_ipi,ipi_mask}
  MIPS: SMP: Fix build.
  MIPS: MIPSxx SC: Avoid destructive invalidation on partial L2 cachelines.
  MIPS: Sibyte: Fix compilation error.
  MIPS: BCM1480: Re-apply patch lost due to bad resolution of merge conflict.
  MIPS: BCM63xx: Add serial driver for bcm63xx integrated UART.
  MIPS: Loongson2: Fix typo "enalbe" -> "enable"
  MIPS: SMTC: Remove duplicate structure field initialization
  MIPS: Remove duplicated #include
  MIPS: BCM63xx: Remove duplicated #include
parents 9abf47f1 da3a7a2b
......@@ -175,7 +175,7 @@ static dbdev_tab_t dbdev_tab[] = {
#define DBDEV_TAB_SIZE ARRAY_SIZE(dbdev_tab)
#ifdef CONFIG_PM
static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][8];
static u32 au1xxx_dbdma_pm_regs[NUM_DBDMA_CHANS + 1][6];
#endif
......@@ -993,14 +993,13 @@ void au1xxx_dbdma_suspend(void)
au1xxx_dbdma_pm_regs[0][3] = au_readl(addr + 0x0c);
/* save channel configurations */
for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
au1xxx_dbdma_pm_regs[i][0] = au_readl(addr + 0x00);
au1xxx_dbdma_pm_regs[i][1] = au_readl(addr + 0x04);
au1xxx_dbdma_pm_regs[i][2] = au_readl(addr + 0x08);
au1xxx_dbdma_pm_regs[i][3] = au_readl(addr + 0x0c);
au1xxx_dbdma_pm_regs[i][4] = au_readl(addr + 0x10);
au1xxx_dbdma_pm_regs[i][5] = au_readl(addr + 0x14);
au1xxx_dbdma_pm_regs[i][6] = au_readl(addr + 0x18);
/* halt channel */
au_writel(au1xxx_dbdma_pm_regs[i][0] & ~1, addr + 0x00);
......@@ -1027,14 +1026,13 @@ void au1xxx_dbdma_resume(void)
au_writel(au1xxx_dbdma_pm_regs[0][3], addr + 0x0c);
/* restore channel configurations */
for (i = 1, addr = DDMA_CHANNEL_BASE; i < NUM_DBDMA_CHANS; i++) {
for (i = 1, addr = DDMA_CHANNEL_BASE; i <= NUM_DBDMA_CHANS; i++) {
au_writel(au1xxx_dbdma_pm_regs[i][0], addr + 0x00);
au_writel(au1xxx_dbdma_pm_regs[i][1], addr + 0x04);
au_writel(au1xxx_dbdma_pm_regs[i][2], addr + 0x08);
au_writel(au1xxx_dbdma_pm_regs[i][3], addr + 0x0c);
au_writel(au1xxx_dbdma_pm_regs[i][4], addr + 0x10);
au_writel(au1xxx_dbdma_pm_regs[i][5], addr + 0x14);
au_writel(au1xxx_dbdma_pm_regs[i][6], addr + 0x18);
au_sync();
addr += 0x100; /* next channel base */
}
......
......@@ -112,10 +112,8 @@ static int iodev_open(struct inode *i, struct file *f)
{
int ret;
lock_kernel();
ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED,
iodev_name, &miscdev);
unlock_kernel();
return ret;
}
......
obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \
dev-dsp.o dev-enet.o
dev-dsp.o dev-enet.o dev-pcmcia.o dev-uart.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-y += boards/
......
......@@ -20,10 +20,11 @@
#include <bcm63xx_cpu.h>
#include <bcm63xx_regs.h>
#include <bcm63xx_io.h>
#include <bcm63xx_board.h>
#include <bcm63xx_dev_pci.h>
#include <bcm63xx_dev_enet.h>
#include <bcm63xx_dev_dsp.h>
#include <bcm63xx_dev_pcmcia.h>
#include <bcm63xx_dev_uart.h>
#include <board_bcm963xx.h>
#define PFX "board_bcm963xx: "
......@@ -793,6 +794,11 @@ int __init board_register_devices(void)
{
u32 val;
bcm63xx_uart_register();
if (board.has_pccard)
bcm63xx_pcmcia_register();
if (board.has_enet0 &&
!board_get_mac_address(board.enet0.mac_addr))
bcm63xx_enet_register(0, &board.enet0);
......
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <asm/bootinfo.h>
#include <linux/platform_device.h>
#include <bcm63xx_cs.h>
#include <bcm63xx_cpu.h>
#include <bcm63xx_dev_pcmcia.h>
#include <bcm63xx_io.h>
#include <bcm63xx_regs.h>
static struct resource pcmcia_resources[] = {
/* pcmcia registers */
{
/* start & end filled at runtime */
.flags = IORESOURCE_MEM,
},
/* pcmcia memory zone resources */
{
.start = BCM_PCMCIA_COMMON_BASE_PA,
.end = BCM_PCMCIA_COMMON_END_PA,
.flags = IORESOURCE_MEM,
},
{
.start = BCM_PCMCIA_ATTR_BASE_PA,
.end = BCM_PCMCIA_ATTR_END_PA,
.flags = IORESOURCE_MEM,
},
{
.start = BCM_PCMCIA_IO_BASE_PA,
.end = BCM_PCMCIA_IO_END_PA,
.flags = IORESOURCE_MEM,
},
/* PCMCIA irq */
{
/* start filled at runtime */
.flags = IORESOURCE_IRQ,
},
/* declare PCMCIA IO resource also */
{
.start = BCM_PCMCIA_IO_BASE_PA,
.end = BCM_PCMCIA_IO_END_PA,
.flags = IORESOURCE_IO,
},
};
static struct bcm63xx_pcmcia_platform_data pd;
static struct platform_device bcm63xx_pcmcia_device = {
.name = "bcm63xx_pcmcia",
.id = 0,
.num_resources = ARRAY_SIZE(pcmcia_resources),
.resource = pcmcia_resources,
.dev = {
.platform_data = &pd,
},
};
static int __init config_pcmcia_cs(unsigned int cs,
u32 base, unsigned int size)
{
int ret;
ret = bcm63xx_set_cs_status(cs, 0);
if (!ret)
ret = bcm63xx_set_cs_base(cs, base, size);
if (!ret)
ret = bcm63xx_set_cs_status(cs, 1);
return ret;
}
static const __initdata struct {
unsigned int cs;
unsigned int base;
unsigned int size;
} pcmcia_cs[3] = {
{
.cs = MPI_CS_PCMCIA_COMMON,
.base = BCM_PCMCIA_COMMON_BASE_PA,
.size = BCM_PCMCIA_COMMON_SIZE
},
{
.cs = MPI_CS_PCMCIA_ATTR,
.base = BCM_PCMCIA_ATTR_BASE_PA,
.size = BCM_PCMCIA_ATTR_SIZE
},
{
.cs = MPI_CS_PCMCIA_IO,
.base = BCM_PCMCIA_IO_BASE_PA,
.size = BCM_PCMCIA_IO_SIZE
},
};
int __init bcm63xx_pcmcia_register(void)
{
int ret, i;
if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358())
return 0;
/* use correct pcmcia ready gpio depending on processor */
switch (bcm63xx_get_cpu_id()) {
case BCM6348_CPU_ID:
pd.ready_gpio = 22;
break;
case BCM6358_CPU_ID:
pd.ready_gpio = 18;
break;
default:
return -ENODEV;
}
pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA);
pcmcia_resources[0].end = pcmcia_resources[0].start +
RSET_PCMCIA_SIZE - 1;
pcmcia_resources[4].start = bcm63xx_get_irq_number(IRQ_PCMCIA);
/* configure pcmcia chip selects */
for (i = 0; i < 3; i++) {
ret = config_pcmcia_cs(pcmcia_cs[i].cs,
pcmcia_cs[i].base,
pcmcia_cs[i].size);
if (ret)
goto out_err;
}
return platform_device_register(&bcm63xx_pcmcia_device);
out_err:
printk(KERN_ERR "unable to set pcmcia chip select\n");
return ret;
}
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <bcm63xx_cpu.h>
#include <bcm63xx_dev_uart.h>
static struct resource uart_resources[] = {
{
.start = -1, /* filled at runtime */
.end = -1, /* filled at runtime */
.flags = IORESOURCE_MEM,
},
{
.start = -1, /* filled at runtime */
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device bcm63xx_uart_device = {
.name = "bcm63xx_uart",
.id = 0,
.num_resources = ARRAY_SIZE(uart_resources),
.resource = uart_resources,
};
int __init bcm63xx_uart_register(void)
{
uart_resources[0].start = bcm63xx_regset_address(RSET_UART0);
uart_resources[0].end = uart_resources[0].start;
uart_resources[0].end += RSET_UART_SIZE - 1;
uart_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0);
return platform_device_register(&bcm63xx_uart_device);
}
#ifndef BCM63XX_DEV_PCMCIA_H_
#define BCM63XX_DEV_PCMCIA_H_
/*
* PCMCIA driver platform data
*/
struct bcm63xx_pcmcia_platform_data {
unsigned int ready_gpio;
};
int bcm63xx_pcmcia_register(void);
#endif /* BCM63XX_DEV_PCMCIA_H_ */
#ifndef BCM63XX_DEV_UART_H_
#define BCM63XX_DEV_UART_H_
int bcm63xx_uart_register(void);
#endif /* BCM63XX_DEV_UART_H_ */
......@@ -77,7 +77,18 @@ extern void play_dead(void);
extern asmlinkage void smp_call_function_interrupt(void);
extern void arch_send_call_function_single_ipi(int cpu);
extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
static inline void arch_send_call_function_single_ipi(int cpu)
{
extern struct plat_smp_ops *mp_ops; /* private */
mp_ops->send_ipi_mask(&cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
}
static inline void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
extern struct plat_smp_ops *mp_ops; /* private */
mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
}
#endif /* __ASM_SMP_H */
......@@ -12,17 +12,17 @@
#if defined(__MIPSEB__)
# include <linux/unaligned/be_struct.h>
# include <linux/unaligned/le_byteshift.h>
# include <linux/unaligned/generic.h>
# define get_unaligned __get_unaligned_be
# define put_unaligned __put_unaligned_be
#elif defined(__MIPSEL__)
# include <linux/unaligned/le_struct.h>
# include <linux/unaligned/be_byteshift.h>
# include <linux/unaligned/generic.h>
# define get_unaligned __get_unaligned_le
# define put_unaligned __put_unaligned_le
#else
# error "MIPS, but neither __MIPSEB__, nor __MIPSEL__???"
#endif
# include <linux/unaligned/generic.h>
#endif /* _ASM_MIPS_UNALIGNED_H */
......@@ -172,13 +172,20 @@ static unsigned int translate_open_flags(int flags)
}
static void sp_setfsuidgid( uid_t uid, gid_t gid)
static int sp_setfsuidgid(uid_t uid, gid_t gid)
{
current->cred->fsuid = uid;
current->cred->fsgid = gid;
struct cred *new;
key_fsuid_changed(current);
key_fsgid_changed(current);
new = prepare_creds();
if (!new)
return -ENOMEM;
new->fsuid = uid;
new->fsgid = gid;
commit_creds(new);
return 0;
}
/*
......@@ -196,7 +203,7 @@ void sp_work_handle_request(void)
mm_segment_t old_fs;
struct timeval tv;
struct timezone tz;
int cmd;
int err, cmd;
char *vcwd;
int size;
......@@ -225,8 +232,11 @@ void sp_work_handle_request(void)
/* Run the syscall at the privilege of the user who loaded the
SP program */
if (vpe_getuid(tclimit))
sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit));
if (vpe_getuid(tclimit)) {
err = sp_setfsuidgid(vpe_getuid(tclimit), vpe_getgid(tclimit));
if (!err)
pr_err("Change of creds failed\n");
}
switch (sc.cmd) {
/* needs the flags argument translating from SDE kit to
......@@ -283,8 +293,11 @@ void sp_work_handle_request(void)
break;
} /* switch */
if (vpe_getuid(tclimit))
sp_setfsuidgid( 0, 0);
if (vpe_getuid(tclimit)) {
err = sp_setfsuidgid(0, 0);
if (!err)
pr_err("restoring old creds failed\n");
}
old_fs = get_fs();
set_fs(KERNEL_DS);
......
......@@ -72,8 +72,9 @@ static void rtlx_dispatch(void)
*/
static irqreturn_t rtlx_interrupt(int irq, void *dev_id)
{
unsigned int vpeflags;
unsigned long flags;
int i;
unsigned int flags, vpeflags;
/* Ought not to be strictly necessary for SMTC builds */
local_irq_save(flags);
......@@ -392,20 +393,12 @@ ssize_t rtlx_write(int index, const void __user *buffer, size_t count)
static int file_open(struct inode *inode, struct file *filp)
{
int minor = iminor(inode);
int err;
lock_kernel();
err = rtlx_open(minor, (filp->f_flags & O_NONBLOCK) ? 0 : 1);
unlock_kernel();
return err;
return rtlx_open(iminor(inode), (filp->f_flags & O_NONBLOCK) ? 0 : 1);
}
static int file_release(struct inode *inode, struct file *filp)
{
int minor = iminor(inode);
return rtlx_release(minor);
return rtlx_release(iminor(inode));
}
static unsigned int file_poll(struct file *file, poll_table * wait)
......
......@@ -32,7 +32,6 @@
#include <linux/cpumask.h>
#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/smp.h>
#include <asm/atomic.h>
#include <asm/cpu.h>
......@@ -128,19 +127,6 @@ asmlinkage __cpuinit void start_secondary(void)
cpu_idle();
}
void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
mp_ops->send_ipi_mask(mask, SMP_CALL_FUNCTION);
}
/*
* We reuse the same vector for the single IPI
*/
void arch_send_call_function_single_ipi(int cpu)
{
mp_ops->send_ipi_mask(cpumask_of_cpu(cpu), SMP_CALL_FUNCTION);
}
/*
* Call into both interrupt handlers, as we share the IPI for them
*/
......
......@@ -1098,9 +1098,8 @@ static void ipi_irq_dispatch(void)
static struct irqaction irq_ipi = {
.handler = ipi_interrupt,
.flags = IRQF_DISABLED,
.name = "SMTC_IPI",
.flags = IRQF_PERCPU
.flags = IRQF_DISABLED | IRQF_PERCPU,
.name = "SMTC_IPI"
};
static void setup_cross_vpe_interrupts(unsigned int nvpe)
......
......@@ -144,14 +144,15 @@ struct tc {
};
struct {
/* Virtual processing elements */
struct list_head vpe_list;
/* Thread contexts */
struct list_head tc_list;
spinlock_t vpe_list_lock;
struct list_head vpe_list; /* Virtual processing elements */
spinlock_t tc_list_lock;
struct list_head tc_list; /* Thread contexts */
} vpecontrol = {
.vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list),
.tc_list = LIST_HEAD_INIT(vpecontrol.tc_list)
.vpe_list_lock = SPIN_LOCK_UNLOCKED,
.vpe_list = LIST_HEAD_INIT(vpecontrol.vpe_list),
.tc_list_lock = SPIN_LOCK_UNLOCKED,
.tc_list = LIST_HEAD_INIT(vpecontrol.tc_list)
};
static void release_progmem(void *ptr);
......@@ -159,28 +160,38 @@ static void release_progmem(void *ptr);
/* get the vpe associated with this minor */
static struct vpe *get_vpe(int minor)
{
struct vpe *v;
struct vpe *res, *v;
if (!cpu_has_mipsmt)
return NULL;
res = NULL;
spin_lock(&vpecontrol.vpe_list_lock);
list_for_each_entry(v, &vpecontrol.vpe_list, list) {
if (v->minor == minor)
return v;
if (v->minor == minor) {
res = v;
break;
}
}
spin_unlock(&vpecontrol.vpe_list_lock);
return NULL;
return res;
}
/* get the vpe associated with this minor */
static struct tc *get_tc(int index)
{
struct tc *t;
struct tc *res, *t;
res = NULL;
spin_lock(&vpecontrol.tc_list_lock);
list_for_each_entry(t, &vpecontrol.tc_list, list) {
if (t->index == index)
return t;
if (t->index == index) {
res = t;
break;
}
}
spin_unlock(&vpecontrol.tc_list_lock);
return NULL;
}
......@@ -190,15 +201,17 @@ static struct vpe *alloc_vpe(int minor)
{
struct vpe *v;
if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) {
if ((v = kzalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL)
return NULL;
}
INIT_LIST_HEAD(&v->tc);
spin_lock(&vpecontrol.vpe_list_lock);
list_add_tail(&v->list, &vpecontrol.vpe_list);
spin_unlock(&vpecontrol.vpe_list_lock);
INIT_LIST_HEAD(&v->notify);
v->minor = minor;
return v;
}
......@@ -212,7 +225,10 @@ static struct tc *alloc_tc(int index)
INIT_LIST_HEAD(&tc->tc);
tc->index = index;
spin_lock(&vpecontrol.tc_list_lock);
list_add_tail(&tc->list, &vpecontrol.tc_list);
spin_unlock(&vpecontrol.tc_list_lock);
out:
return tc;
......@@ -227,7 +243,7 @@ static void release_vpe(struct vpe *v)
kfree(v);
}
static void dump_mtregs(void)
static void __maybe_unused dump_mtregs(void)
{
unsigned long val;
......@@ -1048,20 +1064,19 @@ static int vpe_open(struct inode *inode, struct file *filp)
enum vpe_state state;
struct vpe_notifications *not;
struct vpe *v;
int ret, err = 0;
int ret;
lock_kernel();
if (minor != iminor(inode)) {
/* assume only 1 device at the moment. */
printk(KERN_WARNING "VPE loader: only vpe1 is supported\n");
err = -ENODEV;
goto out;
pr_warning("VPE loader: only vpe1 is supported\n");
return -ENODEV;
}
if ((v = get_vpe(tclimit)) == NULL) {
printk(KERN_WARNING "VPE loader: unable to get vpe\n");
err = -ENODEV;
goto out;
pr_warning("VPE loader: unable to get vpe\n");
return -ENODEV;
}
state = xchg(&v->state, VPE_STATE_INUSE);
......@@ -1101,8 +1116,8 @@ static int vpe_open(struct inode *inode, struct file *filp)
v->shared_ptr = NULL;
v->__start = 0;
out:
unlock_kernel();
return 0;
}
......@@ -1594,14 +1609,14 @@ static void __exit vpe_module_exit(void)
{
struct vpe *v, *n;
device_del(&vpe_device);
unregister_chrdev(major, module_name);
/* No locking needed here */
list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) {
if (v->state != VPE_STATE_UNUSED) {
if (v->state != VPE_STATE_UNUSED)
release_vpe(v);
}
}
device_del(&vpe_device);
unregister_chrdev(major, module_name);
}
module_init(vpe_module_init);
......
......@@ -32,6 +32,11 @@ static void mips_sc_wback_inv(unsigned long addr, unsigned long size)
*/
static void mips_sc_inv(unsigned long addr, unsigned long size)
{
unsigned long lsize = cpu_scache_line_size();
unsigned long almask = ~(lsize - 1);
cache_op(Hit_Writeback_Inv_SD, addr & almask);
cache_op(Hit_Writeback_Inv_SD, (addr + size - 1) & almask);
blast_inv_scache_range(addr, addr + size);
}
......
......@@ -44,7 +44,7 @@ static struct loongson2_register_config {
unsigned int ctrl;
unsigned long long reset_counter1;
unsigned long long reset_counter2;
int cnt1_enalbed, cnt2_enalbed;
int cnt1_enabled, cnt2_enabled;
} reg;
DEFINE_SPINLOCK(sample_lock);
......@@ -81,8 +81,8 @@ static void loongson2_reg_setup(struct op_counter_config *cfg)
reg.ctrl = ctrl;
reg.cnt1_enalbed = cfg[0].enabled;
reg.cnt2_enalbed = cfg[1].enabled;
reg.cnt1_enabled = cfg[0].enabled;
reg.cnt2_enabled = cfg[1].enabled;
}
......@@ -99,7 +99,7 @@ static void loongson2_cpu_setup(void *args)
static void loongson2_cpu_start(void *args)
{
/* Start all counters on current CPU */
if (reg.cnt1_enalbed || reg.cnt2_enalbed)
if (reg.cnt1_enabled || reg.cnt2_enabled)
write_c0_perfctrl(reg.ctrl);
}
......@@ -125,7 +125,7 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
*/
/* Check whether the irq belongs to me */
enabled = reg.cnt1_enalbed | reg.cnt2_enalbed;
enabled = reg.cnt1_enabled | reg.cnt2_enabled;
if (!enabled)
return IRQ_NONE;
......@@ -136,12 +136,12 @@ static irqreturn_t loongson2_perfcount_handler(int irq, void *dev_id)
spin_lock_irqsave(&sample_lock, flags);
if (counter1 & LOONGSON2_PERFCNT_OVERFLOW) {
if (reg.cnt1_enalbed)
if (reg.cnt1_enabled)
oprofile_add_sample(regs, 0);
counter1 = reg.reset_counter1;
}
if (counter2 & LOONGSON2_PERFCNT_OVERFLOW) {
if (reg.cnt2_enalbed)
if (reg.cnt2_enabled)
oprofile_add_sample(regs, 1);
counter2 = reg.reset_counter2;
}
......
......@@ -385,6 +385,7 @@ int msp_pcibios_config_access(unsigned char access_type,
unsigned long intr;
unsigned long value;
static char pciirqflag;
int ret;
#if defined(CONFIG_PMC_MSP7120_GW) || defined(CONFIG_PMC_MSP7120_EVAL)
unsigned int vpe_status;
#endif
......@@ -402,11 +403,13 @@ int msp_pcibios_config_access(unsigned char access_type,
* allocation assigns an interrupt handler to the interrupt.
*/
if (pciirqflag == 0) {
request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
ret = request_irq(MSP_INT_PCI,/* Hardcoded internal MSP7120 wiring */
bpci_interrupt,
IRQF_SHARED | IRQF_DISABLED,
"PMC MSP PCI Host",
preg);
if (ret != 0)
return ret;
pciirqflag = ~0;
}
......
......@@ -165,7 +165,7 @@ static void ip27_send_ipi_single(int destid, unsigned int action)
REMOTE_HUB_SEND_INTR(COMPACT_TO_NASID_NODEID(cpu_to_node(destid)), irq);
}
static void ip27_send_ipi(const struct cpumask *mask, unsigned int action)
static void ip27_send_ipi_mask(const struct cpumask *mask, unsigned int action)
{
unsigned int i;
......
......@@ -117,10 +117,6 @@ static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
unsigned long flags;
unsigned int irq_dirty;
if (cpumask_weight(mask) != 1) {
printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
return -1;
}
i = cpumask_first(mask);
/* Convert logical CPU to physical CPU */
......
......@@ -403,36 +403,31 @@ static int sbprof_zbprof_stop(void)
static int sbprof_tb_open(struct inode *inode, struct file *filp)
{
int minor;
int err = 0;
lock_kernel();
minor = iminor(inode);
if (minor != 0) {
err = -ENODEV;
goto out;
}
if (minor != 0)
return -ENODEV;
if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) {
err = -EBUSY;
goto out;
}
if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED)
return -EBUSY;
memset(&sbp, 0, sizeof(struct sbprof_tb));
sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES);
if (!sbp.sbprof_tbbuf) {
err = -ENOMEM;
goto out;
sbp.open = SB_CLOSED;
wmb();
return -ENOMEM;
}
memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES);
init_waitqueue_head(&sbp.tb_sync);
init_waitqueue_head(&sbp.tb_read);
mutex_init(&sbp.lock);
sbp.open = SB_OPEN;
wmb();
out:
unlock_kernel();
return err;
return 0;
}
static int sbprof_tb_release(struct inode *inode, struct file *filp)
......@@ -440,7 +435,7 @@ static int sbprof_tb_release(struct inode *inode, struct file *filp)
int minor;
minor = iminor(inode);
if (minor != 0 || !sbp.open)
if (minor != 0 || sbp.open != SB_CLOSED)
return -ENODEV;
mutex_lock(&sbp.lock);
......@@ -449,7 +444,8 @@ static int sbprof_tb_release(struct inode *inode, struct file *filp)
sbprof_zbprof_stop();
vfree(sbp.sbprof_tbbuf);
sbp.open = 0;
sbp.open = SB_CLOSED;
wmb();
mutex_unlock(&sbp.lock);
......@@ -583,7 +579,8 @@ static int __init sbprof_tb_init(void)
}
tb_dev = dev;
sbp.open = 0;
sbp.open = SB_CLOSED;
wmb();
tb_period = zbbus_mhz * 10000LL;
pr_info(DEVNAME ": initialized - tb_period = %lld\n",
(long long) tb_period);
......
......@@ -106,7 +106,7 @@ void read_persistent_clock(struct timespec *ts)
break;
}
ts->tv_sec = sec;
tv->tv_nsec = 0;
ts->tv_nsec = 0;
}
int rtc_mips_set_time(unsigned long sec)
......
......@@ -192,6 +192,10 @@ config PCMCIA_AU1X00
tristate "Au1x00 pcmcia support"
depends on SOC_AU1X00 && PCMCIA
config PCMCIA_BCM63XX
tristate "bcm63xx pcmcia support"
depends on BCM63XX && PCMCIA
config PCMCIA_SA1100
tristate "SA1100 support"
depends on ARM && ARCH_SA1100 && PCMCIA
......
......@@ -27,6 +27,7 @@ obj-$(CONFIG_PCMCIA_SA1111) += sa11xx_core.o sa1111_cs.o
obj-$(CONFIG_M32R_PCC) += m32r_pcc.o
obj-$(CONFIG_M32R_CFC) += m32r_cfc.o
obj-$(CONFIG_PCMCIA_AU1X00) += au1x00_ss.o
obj-$(CONFIG_PCMCIA_BCM63XX) += bcm63xx_pcmcia.o
obj-$(CONFIG_PCMCIA_VRC4171) += vrc4171_card.o
obj-$(CONFIG_PCMCIA_VRC4173) += vrc4173_cardu.o
obj-$(CONFIG_OMAP_CF) += omap_cf.o
......
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/ioport.h>
#include <linux/timer.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/gpio.h>
#include <bcm63xx_regs.h>
#include <bcm63xx_io.h>
#include "bcm63xx_pcmcia.h"
#define PFX "bcm63xx_pcmcia: "
#ifdef CONFIG_CARDBUS
/* if cardbus is used, platform device needs reference to actual pci
* device */
static struct pci_dev *bcm63xx_cb_dev;
#endif
/*
* read/write helper for pcmcia regs
*/
static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off)
{
return bcm_readl(skt->base + off);
}
static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt,
u32 val, u32 off)
{
bcm_writel(val, skt->base + off);
}
/*
* This callback should (re-)initialise the socket, turn on status
* interrupts and PCMCIA bus, and wait for power to stabilise so that
* the card status signals report correctly.
*
* Hardware cannot do that.
*/
static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock)
{
return 0;
}
/*
* This callback should remove power on the socket, disable IRQs from
* the card, turn off status interrupts, and disable the PCMCIA bus.
*
* Hardware cannot do that.
*/
static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock)
{
return 0;
}
/*
* Implements the set_socket() operation for the in-kernel PCMCIA
* service (formerly SS_SetSocket in Card Services). We more or
* less punt all of this work and let the kernel handle the details
* of power configuration, reset, &c. We also record the value of
* `state' in order to regurgitate it to the PCMCIA core later.
*/
static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock,
socket_state_t *state)
{
struct bcm63xx_pcmcia_socket *skt;
unsigned long flags;
u32 val;
skt = sock->driver_data;
spin_lock_irqsave(&skt->lock, flags);
/* note: hardware cannot control socket power, so we will
* always report SS_POWERON */
/* apply socket reset */
val = pcmcia_readl(skt, PCMCIA_C1_REG);
if (state->flags & SS_RESET)
val |= PCMCIA_C1_RESET_MASK;
else
val &= ~PCMCIA_C1_RESET_MASK;
/* reverse reset logic for cardbus card */
if (skt->card_detected && (skt->card_type & CARD_CARDBUS))
val ^= PCMCIA_C1_RESET_MASK;
pcmcia_writel(skt, val, PCMCIA_C1_REG);
/* keep requested state for event reporting */
skt->requested_state = *state;
spin_unlock_irqrestore(&skt->lock, flags);
return 0;
}
/*
* identity cardtype from VS[12] input, CD[12] input while only VS2 is
* floating, and CD[12] input while only VS1 is floating
*/
enum {
IN_VS1 = (1 << 0),
IN_VS2 = (1 << 1),
IN_CD1_VS2H = (1 << 2),
IN_CD2_VS2H = (1 << 3),
IN_CD1_VS1H = (1 << 4),
IN_CD2_VS1H = (1 << 5),
};
static const u8 vscd_to_cardtype[] = {
/* VS1 float, VS2 float */
[IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V),
/* VS1 grounded, VS2 float */
[IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V),
/* VS1 grounded, VS2 grounded */
[0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV),
/* VS1 tied to CD1, VS2 float */
[IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V),
/* VS1 grounded, VS2 tied to CD2 */
[IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV),
/* VS1 tied to CD2, VS2 grounded */
[IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV),
/* VS1 float, VS2 grounded */
[IN_VS1] = (CARD_PCCARD | CARD_XV),
/* VS1 float, VS2 tied to CD2 */
[IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V),
/* VS1 float, VS2 tied to CD1 */
[IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV),
/* VS1 tied to CD2, VS2 float */
[IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV),
/* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */
[IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */
};
/*
* poll hardware to check card insertion status
*/
static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt)
{
unsigned int stat;
u32 val;
stat = 0;
/* check CD for card presence */
val = pcmcia_readl(skt, PCMCIA_C1_REG);
if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK))
stat |= SS_DETECT;
/* if new insertion, detect cardtype */
if ((stat & SS_DETECT) && !skt->card_detected) {
unsigned int stat = 0;
/* float VS1, float VS2 */
val |= PCMCIA_C1_VS1OE_MASK;
val |= PCMCIA_C1_VS2OE_MASK;
pcmcia_writel(skt, val, PCMCIA_C1_REG);
/* wait for output to stabilize and read VS[12] */
udelay(10);
val = pcmcia_readl(skt, PCMCIA_C1_REG);
stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0;
stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0;
/* drive VS1 low, float VS2 */
val &= ~PCMCIA_C1_VS1OE_MASK;
val |= PCMCIA_C1_VS2OE_MASK;
pcmcia_writel(skt, val, PCMCIA_C1_REG);
/* wait for output to stabilize and read CD[12] */
udelay(10);
val = pcmcia_readl(skt, PCMCIA_C1_REG);
stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0;
stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0;
/* float VS1, drive VS2 low */
val |= PCMCIA_C1_VS1OE_MASK;
val &= ~PCMCIA_C1_VS2OE_MASK;
pcmcia_writel(skt, val, PCMCIA_C1_REG);
/* wait for output to stabilize and read CD[12] */
udelay(10);
val = pcmcia_readl(skt, PCMCIA_C1_REG);
stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0;
stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0;
/* guess cardtype from all this */
skt->card_type = vscd_to_cardtype[stat];
if (!skt->card_type)
dev_err(&skt->socket.dev, "unsupported card type\n");
/* drive both VS pin to 0 again */
val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK);
/* enable correct logic */
val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK);
if (skt->card_type & CARD_PCCARD)
val |= PCMCIA_C1_EN_PCMCIA_MASK;
else
val |= PCMCIA_C1_EN_CARDBUS_MASK;
pcmcia_writel(skt, val, PCMCIA_C1_REG);
}
skt->card_detected = (stat & SS_DETECT) ? 1 : 0;
/* report card type/voltage */
if (skt->card_type & CARD_CARDBUS)
stat |= SS_CARDBUS;
if (skt->card_type & CARD_3V)
stat |= SS_3VCARD;
if (skt->card_type & CARD_XV)
stat |= SS_XVCARD;
stat |= SS_POWERON;
if (gpio_get_value(skt->pd->ready_gpio))
stat |= SS_READY;
return stat;
}
/*
* core request to get current socket status
*/
static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock,
unsigned int *status)
{
struct bcm63xx_pcmcia_socket *skt;
skt = sock->driver_data;
spin_lock_bh(&skt->lock);
*status = __get_socket_status(skt);
spin_unlock_bh(&skt->lock);
return 0;
}
/*
* socket polling timer callback
*/
static void bcm63xx_pcmcia_poll(unsigned long data)
{
struct bcm63xx_pcmcia_socket *skt;
unsigned int stat, events;
skt = (struct bcm63xx_pcmcia_socket *)data;
spin_lock_bh(&skt->lock);
stat = __get_socket_status(skt);
/* keep only changed bits, and mask with required one from the
* core */
events = (stat ^ skt->old_status) & skt->requested_state.csc_mask;
skt->old_status = stat;
spin_unlock_bh(&skt->lock);
if (events)
pcmcia_parse_events(&skt->socket, events);
mod_timer(&skt->timer,
jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
}
static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock,
struct pccard_io_map *map)
{
/* this doesn't seem to be called by pcmcia layer if static
* mapping is used */
return 0;
}
static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock,
struct pccard_mem_map *map)
{
struct bcm63xx_pcmcia_socket *skt;
struct resource *res;
skt = sock->driver_data;
if (map->flags & MAP_ATTRIB)
res = skt->attr_res;
else
res = skt->common_res;
map->static_start = res->start + map->card_start;
return 0;
}
static struct pccard_operations bcm63xx_pcmcia_operations = {
.init = bcm63xx_pcmcia_sock_init,
.suspend = bcm63xx_pcmcia_suspend,
.get_status = bcm63xx_pcmcia_get_status,
.set_socket = bcm63xx_pcmcia_set_socket,
.set_io_map = bcm63xx_pcmcia_set_io_map,
.set_mem_map = bcm63xx_pcmcia_set_mem_map,
};
/*
* register pcmcia socket to core
*/
static int __devinit bcm63xx_drv_pcmcia_probe(struct platform_device *pdev)
{
struct bcm63xx_pcmcia_socket *skt;
struct pcmcia_socket *sock;
struct resource *res, *irq_res;
unsigned int regmem_size = 0, iomem_size = 0;
u32 val;
int ret;
skt = kzalloc(sizeof(*skt), GFP_KERNEL);
if (!skt)
return -ENOMEM;
spin_lock_init(&skt->lock);
sock = &skt->socket;
sock->driver_data = skt;
/* make sure we have all resources we need */
skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
skt->pd = pdev->dev.platform_data;
if (!skt->common_res || !skt->attr_res || !irq_res || !skt->pd) {
ret = -EINVAL;
goto err;
}
/* remap pcmcia registers */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
regmem_size = resource_size(res);
if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) {
ret = -EINVAL;
goto err;
}
skt->reg_res = res;
skt->base = ioremap(res->start, regmem_size);
if (!skt->base) {
ret = -ENOMEM;
goto err;
}
/* remap io registers */
res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
iomem_size = resource_size(res);
skt->io_base = ioremap(res->start, iomem_size);
if (!skt->io_base) {
ret = -ENOMEM;
goto err;
}
/* resources are static */
sock->resource_ops = &pccard_static_ops;
sock->ops = &bcm63xx_pcmcia_operations;
sock->owner = THIS_MODULE;
sock->dev.parent = &pdev->dev;
sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD;
sock->io_offset = (unsigned long)skt->io_base;
sock->pci_irq = irq_res->start;
#ifdef CONFIG_CARDBUS
sock->cb_dev = bcm63xx_cb_dev;
if (bcm63xx_cb_dev)
sock->features |= SS_CAP_CARDBUS;
#endif
/* assume common & attribute memory have the same size */
sock->map_size = resource_size(skt->common_res);
/* initialize polling timer */
setup_timer(&skt->timer, bcm63xx_pcmcia_poll, (unsigned long)skt);
/* initialize pcmcia control register, drive VS[12] to 0,
* leave CB IDSEL to the old value since it is set by the PCI
* layer */
val = pcmcia_readl(skt, PCMCIA_C1_REG);
val &= PCMCIA_C1_CBIDSEL_MASK;
val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK;
pcmcia_writel(skt, val, PCMCIA_C1_REG);
/*
* Hardware has only one set of timings registers, not one for
* each memory access type, so we configure them for the
* slowest one: attribute memory.
*/
val = PCMCIA_C2_DATA16_MASK;
val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT;
val |= 6 << PCMCIA_C2_INACTIVE_SHIFT;
val |= 3 << PCMCIA_C2_SETUP_SHIFT;
val |= 3 << PCMCIA_C2_HOLD_SHIFT;
pcmcia_writel(skt, val, PCMCIA_C2_REG);
ret = pcmcia_register_socket(sock);
if (ret)
goto err;
/* start polling socket */
mod_timer(&skt->timer,
jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE));
platform_set_drvdata(pdev, skt);
return 0;
err:
if (skt->io_base)
iounmap(skt->io_base);
if (skt->base)
iounmap(skt->base);
if (skt->reg_res)
release_mem_region(skt->reg_res->start, regmem_size);
kfree(skt);
return ret;
}
static int __devexit bcm63xx_drv_pcmcia_remove(struct platform_device *pdev)
{
struct bcm63xx_pcmcia_socket *skt;
struct resource *res;
skt = platform_get_drvdata(pdev);
del_timer_sync(&skt->timer);
iounmap(skt->base);
iounmap(skt->io_base);
res = skt->reg_res;
release_mem_region(res->start, resource_size(res));
kfree(skt);
return 0;
}
struct platform_driver bcm63xx_pcmcia_driver = {
.probe = bcm63xx_drv_pcmcia_probe,
.remove = __devexit_p(bcm63xx_drv_pcmcia_remove),
.driver = {
.name = "bcm63xx_pcmcia",
.owner = THIS_MODULE,
},
};
#ifdef CONFIG_CARDBUS
static int __devinit bcm63xx_cb_probe(struct pci_dev *dev,
const struct pci_device_id *id)
{
/* keep pci device */
bcm63xx_cb_dev = dev;
return platform_driver_register(&bcm63xx_pcmcia_driver);
}
static void __devexit bcm63xx_cb_exit(struct pci_dev *dev)
{
platform_driver_unregister(&bcm63xx_pcmcia_driver);
bcm63xx_cb_dev = NULL;
}
static struct pci_device_id bcm63xx_cb_table[] = {
{
.vendor = PCI_VENDOR_ID_BROADCOM,
.device = BCM6348_CPU_ID,
.subvendor = PCI_VENDOR_ID_BROADCOM,
.subdevice = PCI_ANY_ID,
.class = PCI_CLASS_BRIDGE_CARDBUS << 8,
.class_mask = ~0,
},
{
.vendor = PCI_VENDOR_ID_BROADCOM,
.device = BCM6358_CPU_ID,
.subvendor = PCI_VENDOR_ID_BROADCOM,
.subdevice = PCI_ANY_ID,
.class = PCI_CLASS_BRIDGE_CARDBUS << 8,
.class_mask = ~0,
},
{ },
};
MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table);
static struct pci_driver bcm63xx_cardbus_driver = {
.name = "bcm63xx_cardbus",
.id_table = bcm63xx_cb_table,
.probe = bcm63xx_cb_probe,
.remove = __devexit_p(bcm63xx_cb_exit),
};
#endif
/*
* if cardbus support is enabled, register our platform device after
* our fake cardbus bridge has been registered
*/
static int __init bcm63xx_pcmcia_init(void)
{
#ifdef CONFIG_CARDBUS
return pci_register_driver(&bcm63xx_cardbus_driver);
#else
return platform_driver_register(&bcm63xx_pcmcia_driver);
#endif
}
static void __exit bcm63xx_pcmcia_exit(void)
{
#ifdef CONFIG_CARDBUS
return pci_unregister_driver(&bcm63xx_cardbus_driver);
#else
platform_driver_unregister(&bcm63xx_pcmcia_driver);
#endif
}
module_init(bcm63xx_pcmcia_init);
module_exit(bcm63xx_pcmcia_exit);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller");
#ifndef BCM63XX_PCMCIA_H_
#define BCM63XX_PCMCIA_H_
#include <linux/types.h>
#include <linux/timer.h>
#include <pcmcia/ss.h>
#include <bcm63xx_dev_pcmcia.h>
/* socket polling rate in ms */
#define BCM63XX_PCMCIA_POLL_RATE 500
enum {
CARD_CARDBUS = (1 << 0),
CARD_PCCARD = (1 << 1),
CARD_5V = (1 << 2),
CARD_3V = (1 << 3),
CARD_XV = (1 << 4),
CARD_YV = (1 << 5),
};
struct bcm63xx_pcmcia_socket {
struct pcmcia_socket socket;
/* platform specific data */
struct bcm63xx_pcmcia_platform_data *pd;
/* all regs access are protected by this spinlock */
spinlock_t lock;
/* pcmcia registers resource */
struct resource *reg_res;
/* base remapped address of registers */
void __iomem *base;
/* whether a card is detected at the moment */
int card_detected;
/* type of detected card (mask of above enum) */
u8 card_type;
/* keep last socket status to implement event reporting */
unsigned int old_status;
/* backup of requested socket state */
socket_state_t requested_state;
/* timer used for socket status polling */
struct timer_list timer;
/* attribute/common memory resources */
struct resource *attr_res;
struct resource *common_res;
struct resource *io_res;
/* base address of io memory */
void __iomem *io_base;
};
#endif /* BCM63XX_PCMCIA_H_ */
......@@ -1458,4 +1458,23 @@ config SERIAL_TIMBERDALE
---help---
Add support for UART controller on timberdale.
config SERIAL_BCM63XX
tristate "bcm63xx serial port support"
select SERIAL_CORE
depends on BCM63XX
help
If you have a bcm63xx CPU, you can enable its onboard
serial port by enabling this options.
To compile this driver as a module, choose M here: the
module will be called bcm963xx_uart.
config SERIAL_BCM63XX_CONSOLE
bool "Console on bcm63xx serial port"
depends on SERIAL_BCM63XX=y
select SERIAL_CORE_CONSOLE
help
If you have enabled the serial port on the bcm63xx CPU
you can make it the console by answering Y to this option.
endmenu
......@@ -34,6 +34,7 @@ obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o
obj-$(CONFIG_SERIAL_PXA) += pxa.o
obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o
obj-$(CONFIG_SERIAL_SA1100) += sa1100.o
obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o
obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o
obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o
obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o
......
/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Derived from many drivers using generic_serial interface.
*
* Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
*
* Serial driver for BCM63xx integrated UART.
*
* Hardware flow control was _not_ tested since I only have RX/TX on
* my board.
*/
#if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/console.h>
#include <linux/clk.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
#include <linux/sysrq.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <bcm63xx_clk.h>
#include <bcm63xx_irq.h>
#include <bcm63xx_regs.h>
#include <bcm63xx_io.h>
#define BCM63XX_NR_UARTS 1
static struct uart_port ports[BCM63XX_NR_UARTS];
/*
* rx interrupt mask / stat
*
* mask:
* - rx fifo full
* - rx fifo above threshold
* - rx fifo not empty for too long
*/
#define UART_RX_INT_MASK (UART_IR_MASK(UART_IR_RXOVER) | \
UART_IR_MASK(UART_IR_RXTHRESH) | \
UART_IR_MASK(UART_IR_RXTIMEOUT))
#define UART_RX_INT_STAT (UART_IR_STAT(UART_IR_RXOVER) | \
UART_IR_STAT(UART_IR_RXTHRESH) | \
UART_IR_STAT(UART_IR_RXTIMEOUT))
/*
* tx interrupt mask / stat
*
* mask:
* - tx fifo empty
* - tx fifo below threshold
*/
#define UART_TX_INT_MASK (UART_IR_MASK(UART_IR_TXEMPTY) | \
UART_IR_MASK(UART_IR_TXTRESH))
#define UART_TX_INT_STAT (UART_IR_STAT(UART_IR_TXEMPTY) | \
UART_IR_STAT(UART_IR_TXTRESH))
/*
* external input interrupt
*
* mask: any edge on CTS, DCD
*/
#define UART_EXTINP_INT_MASK (UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \
UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD))
/*
* handy uart register accessor
*/
static inline unsigned int bcm_uart_readl(struct uart_port *port,
unsigned int offset)
{
return bcm_readl(port->membase + offset);
}
static inline void bcm_uart_writel(struct uart_port *port,
unsigned int value, unsigned int offset)
{
bcm_writel(value, port->membase + offset);
}
/*
* serial core request to check if uart tx fifo is empty
*/
static unsigned int bcm_uart_tx_empty(struct uart_port *port)
{
unsigned int val;
val = bcm_uart_readl(port, UART_IR_REG);
return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0;
}
/*
* serial core request to set RTS and DTR pin state and loopback mode
*/
static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
unsigned int val;
val = bcm_uart_readl(port, UART_MCTL_REG);
val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK);
/* invert of written value is reflected on the pin */
if (!(mctrl & TIOCM_DTR))
val |= UART_MCTL_DTR_MASK;
if (!(mctrl & TIOCM_RTS))
val |= UART_MCTL_RTS_MASK;
bcm_uart_writel(port, val, UART_MCTL_REG);
val = bcm_uart_readl(port, UART_CTL_REG);
if (mctrl & TIOCM_LOOP)
val |= UART_CTL_LOOPBACK_MASK;
else
val &= ~UART_CTL_LOOPBACK_MASK;
bcm_uart_writel(port, val, UART_CTL_REG);
}
/*
* serial core request to return RI, CTS, DCD and DSR pin state
*/
static unsigned int bcm_uart_get_mctrl(struct uart_port *port)
{
unsigned int val, mctrl;
mctrl = 0;
val = bcm_uart_readl(port, UART_EXTINP_REG);
if (val & UART_EXTINP_RI_MASK)
mctrl |= TIOCM_RI;
if (val & UART_EXTINP_CTS_MASK)
mctrl |= TIOCM_CTS;
if (val & UART_EXTINP_DCD_MASK)
mctrl |= TIOCM_CD;
if (val & UART_EXTINP_DSR_MASK)
mctrl |= TIOCM_DSR;
return mctrl;
}
/*
* serial core request to disable tx ASAP (used for flow control)
*/
static void bcm_uart_stop_tx(struct uart_port *port)
{
unsigned int val;
val = bcm_uart_readl(port, UART_CTL_REG);
val &= ~(UART_CTL_TXEN_MASK);
bcm_uart_writel(port, val, UART_CTL_REG);
val = bcm_uart_readl(port, UART_IR_REG);
val &= ~UART_TX_INT_MASK;
bcm_uart_writel(port, val, UART_IR_REG);
}
/*
* serial core request to (re)enable tx
*/
static void bcm_uart_start_tx(struct uart_port *port)
{
unsigned int val;
val = bcm_uart_readl(port, UART_IR_REG);
val |= UART_TX_INT_MASK;
bcm_uart_writel(port, val, UART_IR_REG);
val = bcm_uart_readl(port, UART_CTL_REG);
val |= UART_CTL_TXEN_MASK;
bcm_uart_writel(port, val, UART_CTL_REG);
}
/*
* serial core request to stop rx, called before port shutdown
*/
static void bcm_uart_stop_rx(struct uart_port *port)
{
unsigned int val;
val = bcm_uart_readl(port, UART_IR_REG);
val &= ~UART_RX_INT_MASK;
bcm_uart_writel(port, val, UART_IR_REG);
}
/*
* serial core request to enable modem status interrupt reporting
*/
static void bcm_uart_enable_ms(struct uart_port *port)
{
unsigned int val;
val = bcm_uart_readl(port, UART_IR_REG);
val |= UART_IR_MASK(UART_IR_EXTIP);
bcm_uart_writel(port, val, UART_IR_REG);
}
/*
* serial core request to start/stop emitting break char
*/
static void bcm_uart_break_ctl(struct uart_port *port, int ctl)
{
unsigned long flags;
unsigned int val;
spin_lock_irqsave(&port->lock, flags);
val = bcm_uart_readl(port, UART_CTL_REG);
if (ctl)
val |= UART_CTL_XMITBRK_MASK;
else
val &= ~UART_CTL_XMITBRK_MASK;
bcm_uart_writel(port, val, UART_CTL_REG);
spin_unlock_irqrestore(&port->lock, flags);
}
/*
* return port type in string format
*/
static const char *bcm_uart_type(struct uart_port *port)
{
return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL;
}
/*
* read all chars in rx fifo and send them to core
*/
static void bcm_uart_do_rx(struct uart_port *port)
{
struct tty_struct *tty;
unsigned int max_count;
/* limit number of char read in interrupt, should not be
* higher than fifo size anyway since we're much faster than
* serial port */
max_count = 32;
tty = port->info->port.tty;
do {
unsigned int iestat, c, cstat;
char flag;
/* get overrun/fifo empty information from ier
* register */
iestat = bcm_uart_readl(port, UART_IR_REG);
if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY)))
break;
cstat = c = bcm_uart_readl(port, UART_FIFO_REG);
port->icount.rx++;
flag = TTY_NORMAL;
c &= 0xff;
if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) {
/* do stats first */
if (cstat & UART_FIFO_BRKDET_MASK) {
port->icount.brk++;
if (uart_handle_break(port))
continue;
}
if (cstat & UART_FIFO_PARERR_MASK)
port->icount.parity++;
if (cstat & UART_FIFO_FRAMEERR_MASK)
port->icount.frame++;
/* update flag wrt read_status_mask */
cstat &= port->read_status_mask;
if (cstat & UART_FIFO_BRKDET_MASK)
flag = TTY_BREAK;
if (cstat & UART_FIFO_FRAMEERR_MASK)
flag = TTY_FRAME;
if (cstat & UART_FIFO_PARERR_MASK)
flag = TTY_PARITY;
}
if (uart_handle_sysrq_char(port, c))
continue;
if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) {
port->icount.overrun++;
tty_insert_flip_char(tty, 0, TTY_OVERRUN);
}
if ((cstat & port->ignore_status_mask) == 0)
tty_insert_flip_char(tty, c, flag);
} while (--max_count);
tty_flip_buffer_push(tty);
}
/*
* fill tx fifo with chars to send, stop when fifo is about to be full
* or when all chars have been sent.
*/
static void bcm_uart_do_tx(struct uart_port *port)
{
struct circ_buf *xmit;
unsigned int val, max_count;
if (port->x_char) {
bcm_uart_writel(port, port->x_char, UART_FIFO_REG);
port->icount.tx++;
port->x_char = 0;
return;
}
if (uart_tx_stopped(port)) {
bcm_uart_stop_tx(port);
return;
}
xmit = &port->info->xmit;
if (uart_circ_empty(xmit))
goto txq_empty;
val = bcm_uart_readl(port, UART_MCTL_REG);
val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT;
max_count = port->fifosize - val;
while (max_count--) {
unsigned int c;
c = xmit->buf[xmit->tail];
bcm_uart_writel(port, c, UART_FIFO_REG);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
if (uart_circ_empty(xmit))
break;
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (uart_circ_empty(xmit))
goto txq_empty;
return;
txq_empty:
/* nothing to send, disable transmit interrupt */
val = bcm_uart_readl(port, UART_IR_REG);
val &= ~UART_TX_INT_MASK;
bcm_uart_writel(port, val, UART_IR_REG);
return;
}
/*
* process uart interrupt
*/
static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id)
{
struct uart_port *port;
unsigned int irqstat;
port = dev_id;
spin_lock(&port->lock);
irqstat = bcm_uart_readl(port, UART_IR_REG);
if (irqstat & UART_RX_INT_STAT)
bcm_uart_do_rx(port);
if (irqstat & UART_TX_INT_STAT)
bcm_uart_do_tx(port);
if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) {
unsigned int estat;
estat = bcm_uart_readl(port, UART_EXTINP_REG);
if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS))
uart_handle_cts_change(port,
estat & UART_EXTINP_CTS_MASK);
if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD))
uart_handle_dcd_change(port,
estat & UART_EXTINP_DCD_MASK);
}
spin_unlock(&port->lock);
return IRQ_HANDLED;
}
/*
* enable rx & tx operation on uart
*/
static void bcm_uart_enable(struct uart_port *port)
{
unsigned int val;
val = bcm_uart_readl(port, UART_CTL_REG);
val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK);
bcm_uart_writel(port, val, UART_CTL_REG);
}
/*
* disable rx & tx operation on uart
*/
static void bcm_uart_disable(struct uart_port *port)
{
unsigned int val;
val = bcm_uart_readl(port, UART_CTL_REG);
val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK |
UART_CTL_RXEN_MASK);
bcm_uart_writel(port, val, UART_CTL_REG);
}
/*
* clear all unread data in rx fifo and unsent data in tx fifo
*/
static void bcm_uart_flush(struct uart_port *port)
{
unsigned int val;
/* empty rx and tx fifo */
val = bcm_uart_readl(port, UART_CTL_REG);
val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK;
bcm_uart_writel(port, val, UART_CTL_REG);
/* read any pending char to make sure all irq status are
* cleared */
(void)bcm_uart_readl(port, UART_FIFO_REG);
}
/*
* serial core request to initialize uart and start rx operation
*/
static int bcm_uart_startup(struct uart_port *port)
{
unsigned int val;
int ret;
/* mask all irq and flush port */
bcm_uart_disable(port);
bcm_uart_writel(port, 0, UART_IR_REG);
bcm_uart_flush(port);
/* clear any pending external input interrupt */
(void)bcm_uart_readl(port, UART_EXTINP_REG);
/* set rx/tx fifo thresh to fifo half size */
val = bcm_uart_readl(port, UART_MCTL_REG);
val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK);
val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT;
val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT;
bcm_uart_writel(port, val, UART_MCTL_REG);
/* set rx fifo timeout to 1 char time */
val = bcm_uart_readl(port, UART_CTL_REG);
val &= ~UART_CTL_RXTMOUTCNT_MASK;
val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT;
bcm_uart_writel(port, val, UART_CTL_REG);
/* report any edge on dcd and cts */
val = UART_EXTINP_INT_MASK;
val |= UART_EXTINP_DCD_NOSENSE_MASK;
val |= UART_EXTINP_CTS_NOSENSE_MASK;
bcm_uart_writel(port, val, UART_EXTINP_REG);
/* register irq and enable rx interrupts */
ret = request_irq(port->irq, bcm_uart_interrupt, 0,
bcm_uart_type(port), port);
if (ret)
return ret;
bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG);
bcm_uart_enable(port);
return 0;
}
/*
* serial core request to flush & disable uart
*/
static void bcm_uart_shutdown(struct uart_port *port)
{
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
bcm_uart_writel(port, 0, UART_IR_REG);
spin_unlock_irqrestore(&port->lock, flags);
bcm_uart_disable(port);
bcm_uart_flush(port);
free_irq(port->irq, port);
}
/*
* serial core request to change current uart setting
*/
static void bcm_uart_set_termios(struct uart_port *port,
struct ktermios *new,
struct ktermios *old)
{
unsigned int ctl, baud, quot, ier;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
/* disable uart while changing speed */
bcm_uart_disable(port);
bcm_uart_flush(port);
/* update Control register */
ctl = bcm_uart_readl(port, UART_CTL_REG);
ctl &= ~UART_CTL_BITSPERSYM_MASK;
switch (new->c_cflag & CSIZE) {
case CS5:
ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT);
break;
case CS6:
ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT);
break;
case CS7:
ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT);
break;
default:
ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT);
break;
}
ctl &= ~UART_CTL_STOPBITS_MASK;
if (new->c_cflag & CSTOPB)
ctl |= UART_CTL_STOPBITS_2;
else
ctl |= UART_CTL_STOPBITS_1;
ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
if (new->c_cflag & PARENB)
ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK);
ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
if (new->c_cflag & PARODD)
ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK);
bcm_uart_writel(port, ctl, UART_CTL_REG);
/* update Baudword register */
baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
quot = uart_get_divisor(port, baud) - 1;
bcm_uart_writel(port, quot, UART_BAUD_REG);
/* update Interrupt register */
ier = bcm_uart_readl(port, UART_IR_REG);
ier &= ~UART_IR_MASK(UART_IR_EXTIP);
if (UART_ENABLE_MS(port, new->c_cflag))
ier |= UART_IR_MASK(UART_IR_EXTIP);
bcm_uart_writel(port, ier, UART_IR_REG);
/* update read/ignore mask */
port->read_status_mask = UART_FIFO_VALID_MASK;
if (new->c_iflag & INPCK) {
port->read_status_mask |= UART_FIFO_FRAMEERR_MASK;
port->read_status_mask |= UART_FIFO_PARERR_MASK;
}
if (new->c_iflag & (BRKINT))
port->read_status_mask |= UART_FIFO_BRKDET_MASK;
port->ignore_status_mask = 0;
if (new->c_iflag & IGNPAR)
port->ignore_status_mask |= UART_FIFO_PARERR_MASK;
if (new->c_iflag & IGNBRK)
port->ignore_status_mask |= UART_FIFO_BRKDET_MASK;
if (!(new->c_cflag & CREAD))
port->ignore_status_mask |= UART_FIFO_VALID_MASK;
uart_update_timeout(port, new->c_cflag, baud);
bcm_uart_enable(port);
spin_unlock_irqrestore(&port->lock, flags);
}
/*
* serial core request to claim uart iomem
*/
static int bcm_uart_request_port(struct uart_port *port)
{
unsigned int size;
size = RSET_UART_SIZE;
if (!request_mem_region(port->mapbase, size, "bcm63xx")) {
dev_err(port->dev, "Memory region busy\n");
return -EBUSY;
}
port->membase = ioremap(port->mapbase, size);
if (!port->membase) {
dev_err(port->dev, "Unable to map registers\n");
release_mem_region(port->mapbase, size);
return -EBUSY;
}
return 0;
}
/*
* serial core request to release uart iomem
*/
static void bcm_uart_release_port(struct uart_port *port)
{
release_mem_region(port->mapbase, RSET_UART_SIZE);
iounmap(port->membase);
}
/*
* serial core request to do any port required autoconfiguration
*/
static void bcm_uart_config_port(struct uart_port *port, int flags)
{
if (flags & UART_CONFIG_TYPE) {
if (bcm_uart_request_port(port))
return;
port->type = PORT_BCM63XX;
}
}
/*
* serial core request to check that port information in serinfo are
* suitable
*/
static int bcm_uart_verify_port(struct uart_port *port,
struct serial_struct *serinfo)
{
if (port->type != PORT_BCM63XX)
return -EINVAL;
if (port->irq != serinfo->irq)
return -EINVAL;
if (port->iotype != serinfo->io_type)
return -EINVAL;
if (port->mapbase != (unsigned long)serinfo->iomem_base)
return -EINVAL;
return 0;
}
/* serial core callbacks */
static struct uart_ops bcm_uart_ops = {
.tx_empty = bcm_uart_tx_empty,
.get_mctrl = bcm_uart_get_mctrl,
.set_mctrl = bcm_uart_set_mctrl,
.start_tx = bcm_uart_start_tx,
.stop_tx = bcm_uart_stop_tx,
.stop_rx = bcm_uart_stop_rx,
.enable_ms = bcm_uart_enable_ms,
.break_ctl = bcm_uart_break_ctl,
.startup = bcm_uart_startup,
.shutdown = bcm_uart_shutdown,
.set_termios = bcm_uart_set_termios,
.type = bcm_uart_type,
.release_port = bcm_uart_release_port,
.request_port = bcm_uart_request_port,
.config_port = bcm_uart_config_port,
.verify_port = bcm_uart_verify_port,
};
#ifdef CONFIG_SERIAL_BCM63XX_CONSOLE
static inline void wait_for_xmitr(struct uart_port *port)
{
unsigned int tmout;
/* Wait up to 10ms for the character(s) to be sent. */
tmout = 10000;
while (--tmout) {
unsigned int val;
val = bcm_uart_readl(port, UART_IR_REG);
if (val & UART_IR_STAT(UART_IR_TXEMPTY))
break;
udelay(1);
}
/* Wait up to 1s for flow control if necessary */
if (port->flags & UPF_CONS_FLOW) {
tmout = 1000000;
while (--tmout) {
unsigned int val;
val = bcm_uart_readl(port, UART_EXTINP_REG);
if (val & UART_EXTINP_CTS_MASK)
break;
udelay(1);
}
}
}
/*
* output given char
*/
static void bcm_console_putchar(struct uart_port *port, int ch)
{
wait_for_xmitr(port);
bcm_uart_writel(port, ch, UART_FIFO_REG);
}
/*
* console core request to output given string
*/
static void bcm_console_write(struct console *co, const char *s,
unsigned int count)
{
struct uart_port *port;
unsigned long flags;
int locked;
port = &ports[co->index];
local_irq_save(flags);
if (port->sysrq) {
/* bcm_uart_interrupt() already took the lock */
locked = 0;
} else if (oops_in_progress) {
locked = spin_trylock(&port->lock);
} else {
spin_lock(&port->lock);
locked = 1;
}
/* call helper to deal with \r\n */
uart_console_write(port, s, count, bcm_console_putchar);
/* and wait for char to be transmitted */
wait_for_xmitr(port);
if (locked)
spin_unlock(&port->lock);
local_irq_restore(flags);
}
/*
* console core request to setup given console, find matching uart
* port and setup it.
*/
static int bcm_console_setup(struct console *co, char *options)
{
struct uart_port *port;
int baud = 9600;
int bits = 8;
int parity = 'n';
int flow = 'n';
if (co->index < 0 || co->index >= BCM63XX_NR_UARTS)
return -EINVAL;
port = &ports[co->index];
if (!port->membase)
return -ENODEV;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
return uart_set_options(port, co, baud, parity, bits, flow);
}
static struct uart_driver bcm_uart_driver;
static struct console bcm63xx_console = {
.name = "ttyS",
.write = bcm_console_write,
.device = uart_console_device,
.setup = bcm_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &bcm_uart_driver,
};
static int __init bcm63xx_console_init(void)
{
register_console(&bcm63xx_console);
return 0;
}
console_initcall(bcm63xx_console_init);
#define BCM63XX_CONSOLE (&bcm63xx_console)
#else
#define BCM63XX_CONSOLE NULL
#endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */
static struct uart_driver bcm_uart_driver = {
.owner = THIS_MODULE,
.driver_name = "bcm63xx_uart",
.dev_name = "ttyS",
.major = TTY_MAJOR,
.minor = 64,
.nr = 1,
.cons = BCM63XX_CONSOLE,
};
/*
* platform driver probe/remove callback
*/
static int __devinit bcm_uart_probe(struct platform_device *pdev)
{
struct resource *res_mem, *res_irq;
struct uart_port *port;
struct clk *clk;
int ret;
if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS)
return -EINVAL;
if (ports[pdev->id].membase)
return -EBUSY;
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res_mem)
return -ENODEV;
res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res_irq)
return -ENODEV;
clk = clk_get(&pdev->dev, "periph");
if (IS_ERR(clk))
return -ENODEV;
port = &ports[pdev->id];
memset(port, 0, sizeof(*port));
port->iotype = UPIO_MEM;
port->mapbase = res_mem->start;
port->irq = res_irq->start;
port->ops = &bcm_uart_ops;
port->flags = UPF_BOOT_AUTOCONF;
port->dev = &pdev->dev;
port->fifosize = 16;
port->uartclk = clk_get_rate(clk) / 2;
clk_put(clk);
ret = uart_add_one_port(&bcm_uart_driver, port);
if (ret) {
kfree(port);
return ret;
}
platform_set_drvdata(pdev, port);
return 0;
}
static int __devexit bcm_uart_remove(struct platform_device *pdev)
{
struct uart_port *port;
port = platform_get_drvdata(pdev);
uart_remove_one_port(&bcm_uart_driver, port);
platform_set_drvdata(pdev, NULL);
/* mark port as free */
ports[pdev->id].membase = 0;
return 0;
}
/*
* platform driver stuff
*/
static struct platform_driver bcm_uart_platform_driver = {
.probe = bcm_uart_probe,
.remove = __devexit_p(bcm_uart_remove),
.driver = {
.owner = THIS_MODULE,
.name = "bcm63xx_uart",
},
};
static int __init bcm_uart_init(void)
{
int ret;
ret = uart_register_driver(&bcm_uart_driver);
if (ret)
return ret;
ret = platform_driver_register(&bcm_uart_platform_driver);
if (ret)
uart_unregister_driver(&bcm_uart_driver);
return ret;
}
static void __exit bcm_uart_exit(void)
{
platform_driver_unregister(&bcm_uart_platform_driver);
uart_unregister_driver(&bcm_uart_driver);
}
module_init(bcm_uart_init);
module_exit(bcm_uart_exit);
MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>");
MODULE_DESCRIPTION("Broadcom 63<xx integrated uart driver");
MODULE_LICENSE("GPL");
......@@ -176,6 +176,9 @@
/* Qualcomm MSM SoCs */
#define PORT_MSM 88
/* BCM63xx family SoCs */
#define PORT_BCM63XX 89
#ifdef __KERNEL__
#include <linux/compiler.h>
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment