Commit e40cca9e authored by Jeff Garzik's avatar Jeff Garzik

[netdrvr e100] remove __devinit markers, fixing oops

parent 068ff4a2
......@@ -60,7 +60,7 @@ static const u8 def_config[] = {
* All other init functions will only set values that are
* different from the 82557 default.
*/
void __devinit
void
e100_config_init_82557(struct e100_private *bdp)
{
/* initialize config block */
......@@ -104,7 +104,7 @@ e100_config_init_82557(struct e100_private *bdp)
e100_config_mulcast_enbl(bdp, false);
}
static void __devinit
static void
e100_config_init_82558(struct e100_private *bdp)
{
/* MWI enable. This should be turned on only if the adapter is a 82558/9
......@@ -136,7 +136,7 @@ e100_config_init_82558(struct e100_private *bdp)
e100_config_long_rx(bdp, true);
}
static void __devinit
static void
e100_config_init_82550(struct e100_private *bdp)
{
/* The D102 chip allows for 32 config bytes. This value is
......@@ -160,7 +160,7 @@ e100_config_init_82550(struct e100_private *bdp)
}
/* Initialize the adapter's configure block */
void __devinit
void
e100_config_init(struct e100_private *bdp)
{
e100_config_init_82557(bdp);
......
......@@ -124,7 +124,7 @@ static void e100_free_nontx_list(struct e100_private *);
static void e100_non_tx_background(unsigned long);
static inline void e100_tx_skb_free(struct e100_private *bdp, tcb_t *tcb);
/* Global Data structures and variables */
char e100_copyright[] __devinitdata = "Copyright (c) 2003 Intel Corporation";
char e100_copyright[] = "Copyright (c) 2003 Intel Corporation";
char e100_driver_version[]="2.3.30-k1";
const char *e100_full_driver_name = "Intel(R) PRO/100 Network Driver";
char e100_short_driver_name[] = "e100";
......@@ -539,7 +539,7 @@ e100_trigger_SWI(struct e100_private *bdp)
readw(&(bdp->scb->scb_status)); /* flushes last write, read-safe */
}
static int __devinit
static int
e100_found1(struct pci_dev *pcid, const struct pci_device_id *ent)
{
static int first_time = true;
......@@ -823,7 +823,7 @@ module_exit(e100_cleanup_module);
*
* This routine does range checking on command-line options
*/
void __devinit
void
e100_check_options(int board, struct e100_private *bdp)
{
if (board >= E100_MAX_NIC) {
......@@ -894,7 +894,7 @@ e100_check_options(int board, struct e100_private *bdp)
* If the option's value is '-1' use the specified default.
* Otherwise, if the value is invalid, change it to the default.
*/
void __devinit
void
e100_set_int_option(int *option, int val, int min, int max, int default_val,
char *name)
{
......@@ -928,7 +928,7 @@ e100_set_int_option(int *option, int val, int min, int max, int default_val,
* Otherwise, if the value is invalid (not 0 or 1),
* change it to the default.
*/
void __devinit
void
e100_set_bool_option(struct e100_private *bdp, int val, u32 mask,
int default_val, char *name)
{
......@@ -1241,7 +1241,7 @@ e100_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
* true: if successful
* false: otherwise
*/
static unsigned char __devinit
static unsigned char
e100_init(struct e100_private *bdp)
{
u32 st_timeout = 0;
......@@ -1290,7 +1290,7 @@ e100_init(struct e100_private *bdp)
* true: if S/W was successfully initialized
* false: otherwise
*/
static unsigned char __devinit
static unsigned char
e100_sw_init(struct e100_private *bdp)
{
bdp->next_cu_cmd = START_WAIT; // init the next cu state
......@@ -1318,7 +1318,7 @@ e100_sw_init(struct e100_private *bdp)
return 1;
}
static void __devinit
static void
e100_tco_workaround(struct e100_private *bdp)
{
int i;
......@@ -1519,7 +1519,7 @@ e100_setup_tcb_pool(tcb_t *head, unsigned int qlen, struct e100_private *bdp)
* 0: if the operation was successful
* %-ENOMEM: if memory allocation failed
*/
unsigned char __devinit
unsigned char
e100_alloc_space(struct e100_private *bdp)
{
unsigned long off;
......@@ -2508,7 +2508,7 @@ e100_cmd_complete_location(struct e100_private *bdp)
* true: if successfully cleared stat counters
* false: otherwise
*/
static unsigned char __devinit
static unsigned char
e100_clr_cntrs(struct e100_private *bdp)
{
volatile u32 *pcmd_complete;
......@@ -2873,7 +2873,7 @@ e100_load_microcode(struct e100_private *bdp)
/***************************************************************************/
/* Read PWA (printed wired assembly) number */
void __devinit
void
e100_rd_pwa_no(struct e100_private *bdp)
{
bdp->pwa_no = e100_eeprom_read(bdp, EEPROM_PWA_NO);
......@@ -2882,7 +2882,7 @@ e100_rd_pwa_no(struct e100_private *bdp)
}
/* Read the permanent ethernet address from the eprom. */
void __devinit
void
e100_rd_eaddr(struct e100_private *bdp)
{
int i;
......@@ -2947,7 +2947,7 @@ e100_D101M_checksum(struct e100_private *bdp, struct sk_buff *skb)
/***************************************************************************/
/* Print the board's configuration */
void __devinit
void
e100_print_brd_conf(struct e100_private *bdp)
{
/* Print the string if checksum Offloading was enabled */
......@@ -2975,7 +2975,7 @@ e100_print_brd_conf(struct e100_private *bdp)
* true: if successfull
* false: otherwise
*/
static unsigned char __devinit
static unsigned char
e100_pci_setup(struct pci_dev *pcid, struct e100_private *bdp)
{
struct net_device *dev = bdp->device;
......@@ -3754,7 +3754,7 @@ e100_ethtool_led_blink(struct net_device *dev, struct ifreq *ifr)
return 0;
}
static inline int __devinit
static inline int
e100_10BaseT_adapter(struct e100_private *bdp)
{
return ((bdp->pdev->device == 0x1229) &&
......@@ -3762,7 +3762,7 @@ e100_10BaseT_adapter(struct e100_private *bdp)
(bdp->pdev->subsystem_device == 0x0003));
}
static void __devinit
static void
e100_get_speed_duplex_caps(struct e100_private *bdp)
{
u16 status;
......
......@@ -132,7 +132,7 @@ e100_mdi_read(struct e100_private *bdp, u32 reg_addr, u32 phy_addr, u16 *data)
}
}
static unsigned char __devinit
static unsigned char
e100_phy_valid(struct e100_private *bdp, unsigned int phy_address)
{
u16 ctrl_reg, stat_reg;
......@@ -150,7 +150,7 @@ e100_phy_valid(struct e100_private *bdp, unsigned int phy_address)
return true;
}
static void __devinit
static void
e100_phy_address_detect(struct e100_private *bdp)
{
unsigned int addr;
......@@ -180,7 +180,7 @@ e100_phy_address_detect(struct e100_private *bdp)
}
}
static void __devinit
static void
e100_phy_id_detect(struct e100_private *bdp)
{
u16 low_id_reg, high_id_reg;
......@@ -204,7 +204,7 @@ e100_phy_id_detect(struct e100_private *bdp)
((unsigned int) high_id_reg << 16));
}
static void __devinit
static void
e100_phy_isolate(struct e100_private *bdp)
{
unsigned int phy_address;
......@@ -227,7 +227,7 @@ e100_phy_isolate(struct e100_private *bdp)
}
}
static unsigned char __devinit
static unsigned char
e100_phy_specific_setup(struct e100_private *bdp)
{
u16 misc_reg;
......@@ -380,7 +380,7 @@ e100_phy_fix_squelch(struct e100_private *bdp)
* Returns:
* NOTHING
*/
static void __devinit
static void
e100_fix_polarity(struct e100_private *bdp)
{
u16 status;
......@@ -916,7 +916,7 @@ e100_phy_reset(struct e100_private *bdp)
schedule_timeout(HZ / 2);
}
unsigned char __devinit
unsigned char
e100_phy_init(struct e100_private *bdp)
{
e100_phy_reset(bdp);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment