mmc: mxs-mmc: add mmc host driver for i.MX23/28

This adds the mmc host driver for Freescale MXS-based SoC i.MX23/28.
The driver calls into mxs-dma via generic dmaengine api for both pio
and data transfer.

Thanks Chris Ball for the indentation patch.
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Chris Ball <cjb@laptop.org>

arch/arm/mach-mxs/include/mach/mmc.h

+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MACH_MXS_MMC_H__
+#define __MACH_MXS_MMC_H__
+
+struct mxs_mmc_platform_data {
+	int wp_gpio;	/* write protect pin */
+	unsigned int flags;
+#define SLOTF_4_BIT_CAPABLE	(1 << 0)
+#define SLOTF_8_BIT_CAPABLE	(1 << 1)
+};
+#endif /* __MACH_MXS_MMC_H__ */

drivers/mmc/host/Kconfig

@@ -319,6 +319,15 @@ config MMC_MXC
 
 	  If unsure, say N.
 
+config MMC_MXS
+	tristate "Freescale MXS Multimedia Card Interface support"
+	depends on ARCH_MXS && MXS_DMA
+	help
+	  This selects the Freescale SSP MMC controller found on MXS based
+	  platforms like mx23/28.
+
+	  If unsure, say N.
+
 config MMC_TIFM_SD
 	tristate "TI Flash Media MMC/SD Interface support  (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && PCI

drivers/mmc/host/Makefile

@@ -6,6 +6,7 @@ obj-$(CONFIG_MMC_ARMMMCI)	+= mmci.o
 obj-$(CONFIG_MMC_PXA)		+= pxamci.o
 obj-$(CONFIG_MMC_IMX)		+= imxmmc.o
 obj-$(CONFIG_MMC_MXC)		+= mxcmmc.o
+obj-$(CONFIG_MMC_MXS)		+= mxs-mmc.o
 obj-$(CONFIG_MMC_SDHCI)		+= sdhci.o
 obj-$(CONFIG_MMC_SDHCI_PCI)	+= sdhci-pci.o
 obj-$(CONFIG_MMC_SDHCI_PXA)	+= sdhci-pxa.o