x86: EFI runtime service support: remove duplicated code from efi_32.c

This patch removes the duplicated code between efi_32.c and efi.c.
Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Andi Kleen <ak@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>

arch/x86/kernel/Makefile_32

@@ -38,7 +38,7 @@ obj-$(CONFIG_X86_SUMMIT_NUMA)	+= summit_32.o
 obj-$(CONFIG_KPROBES)		+= kprobes_32.o
 obj-$(CONFIG_MODULES)		+= module_32.o
 obj-$(CONFIG_ACPI_SRAT) 	+= srat_32.o
-obj-$(CONFIG_EFI) 		+= efi_32.o efi_stub_32.o
+obj-$(CONFIG_EFI) 		+= efi.o efi_32.o efi_stub_32.o
 obj-$(CONFIG_DOUBLEFAULT) 	+= doublefault_32.o
 obj-$(CONFIG_VM86)		+= vm86_32.o
 obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o

arch/x86/kernel/e820_32.c

@@ -17,11 +17,6 @@
 #include <asm/e820.h>
 #include <asm/setup.h>
 
-#ifdef CONFIG_EFI
-int efi_enabled = 0;
-EXPORT_SYMBOL(efi_enabled);
-#endif
-
 struct e820map e820;
 struct change_member {
 	struct e820entry *pbios; /* pointer to original bios entry */

arch/x86/kernel/setup_32.c

@@ -618,16 +618,9 @@ void __init setup_arch(char **cmdline_p)
 	pre_setup_arch_hook();
 	early_cpu_init();
 
-	/*
-	 * FIXME: This isn't an official loader_type right
-	 * now but does currently work with elilo.
-	 * If we were configured as an EFI kernel, check to make
-	 * sure that we were loaded correctly from elilo and that
-	 * the system table is valid.  If not, then initialize normally.
-	 */
 #ifdef CONFIG_EFI
-	if ((boot_params.hdr.type_of_loader == 0x50) &&
-	    boot_params.efi_info.efi_systab)
+	if (!strncmp((char *)&boot_params.efi_info.efi_loader_signature,
+		     "EL32", 4))
 		efi_enabled = 1;
 #endif
 

include/asm-x86/efi.h

@@ -2,6 +2,48 @@
 #define _ASM_X86_EFI_H
 
 #ifdef CONFIG_X86_32
+
+extern unsigned long asmlinkage efi_call_phys(void *, ...);
+
+#define efi_call_phys0(f)		efi_call_phys(f)
+#define efi_call_phys1(f, a1)		efi_call_phys(f, a1)
+#define efi_call_phys2(f, a1, a2)	efi_call_phys(f, a1, a2)
+#define efi_call_phys3(f, a1, a2, a3)	efi_call_phys(f, a1, a2, a3)
+#define efi_call_phys4(f, a1, a2, a3, a4)	\
+	efi_call_phys(f, a1, a2, a3, a4)
+#define efi_call_phys5(f, a1, a2, a3, a4, a5)	\
+	efi_call_phys(f, a1, a2, a3, a4, a5)
+#define efi_call_phys6(f, a1, a2, a3, a4, a5, a6)	\
+	efi_call_phys(f, a1, a2, a3, a4, a5, a6)
+/*
+ * Wrap all the virtual calls in a way that forces the parameters on the stack.
+ */
+
+#define efi_call_virt(f, args...) \
+     ((efi_##f##_t __attribute__((regparm(0)))*)efi.systab->runtime->f)(args)
+
+#define efi_call_virt0(f)		efi_call_virt(f)
+#define efi_call_virt1(f, a1)		efi_call_virt(f, a1)
+#define efi_call_virt2(f, a1, a2)	efi_call_virt(f, a1, a2)
+#define efi_call_virt3(f, a1, a2, a3)	efi_call_virt(f, a1, a2, a3)
+#define efi_call_virt4(f, a1, a2, a3, a4)	\
+	efi_call_virt(f, a1, a2, a3, a4)
+#define efi_call_virt5(f, a1, a2, a3, a4, a5)	\
+	efi_call_virt(f, a1, a2, a3, a4, a5)
+#define efi_call_virt6(f, a1, a2, a3, a4, a5, a6)	\
+	efi_call_virt(f, a1, a2, a3, a4, a5, a6)
+/*
+ * We require an early boot_ioremap mapping mechanism initially
+ */
+extern void *boot_ioremap(unsigned long, unsigned long);
+
+#define efi_early_ioremap(addr, size)		boot_ioremap(addr, size)
+#define efi_early_iounmap(vaddr, size)
+
+#define efi_ioremap(addr, size)			ioremap(addr, size)
+
+#define end_pfn_map				max_low_pfn
+
 #else /* !CONFIG_X86_32 */
 
 #define MAX_EFI_IO_PAGES	100