Commit e438c5d6 authored by Yaniv Rosner's avatar Yaniv Rosner Committed by David S. Miller

bnx2x: Control SFP+ tap values via nvm config

Configure SFP+ tap values to optimize link signal according to NVRAM setup.
Signed-off-by: default avatarYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: default avatarYuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: default avatarEilon Greenstein <eilong@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 31b958d7
......@@ -508,7 +508,22 @@ struct port_hw_cfg { /* port 0: 0x12c port 1: 0x2bc */
#define PORT_HW_CFG_PAUSE_ON_HOST_RING_DISABLED 0x00000000
#define PORT_HW_CFG_PAUSE_ON_HOST_RING_ENABLED 0x00000001
u32 reserved0[6]; /* 0x178 */
/* SFP+ Tx Equalization: NIC recommended and tested value is 0xBEB2
* LOM recommended and tested value is 0xBEB2. Using a different
* value means using a value not tested by BRCM
*/
u32 sfi_tap_values; /* 0x178 */
#define PORT_HW_CFG_TX_EQUALIZATION_MASK 0x0000FFFF
#define PORT_HW_CFG_TX_EQUALIZATION_SHIFT 0
/* SFP+ Tx driver broadcast IDRIVER: NIC recommended and tested
* value is 0x2. LOM recommended and tested value is 0x2. Using a
* different value means using a value not tested by BRCM
*/
#define PORT_HW_CFG_TX_DRV_BROADCAST_MASK 0x000F0000
#define PORT_HW_CFG_TX_DRV_BROADCAST_SHIFT 16
u32 reserved0[5]; /* 0x17c */
u32 aeu_int_mask; /* 0x190 */
......
......@@ -3630,6 +3630,16 @@ static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy,
* init configuration, and set/clear SGMII flag. Internal
* phy init is done purely in phy_init stage.
*/
#define WC_TX_DRIVER(post2, idriver, ipre) \
((post2 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) | \
(idriver << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) | \
(ipre << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET))
#define WC_TX_FIR(post, main, pre) \
((post << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) | \
(main << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) | \
(pre << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET))
static void bnx2x_warpcore_enable_AN_KR2(struct bnx2x_phy *phy,
struct link_params *params,
struct link_vars *vars)
......@@ -3755,19 +3765,12 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy,
lane = bnx2x_get_warpcore_lane(phy, params);
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane,
((0x02 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) |
(0x06 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) |
(0x09 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)));
WC_TX_DRIVER(0x02, 0x06, 0x09));
/* Configure the next lane if dual mode */
if (phy->flags & FLAGS_WC_DUAL_MODE)
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_TX0_TX_DRIVER + 0x10*(lane+1),
((0x02 <<
MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) |
(0x06 <<
MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) |
(0x09 <<
MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)));
WC_TX_DRIVER(0x02, 0x06, 0x09));
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_CL72_USERB0_CL72_OS_DEF_CTRL,
0x03f0);
......@@ -3910,6 +3913,8 @@ static void bnx2x_warpcore_set_10G_XFI(struct bnx2x_phy *phy,
{
struct bnx2x *bp = params->bp;
u16 misc1_val, tap_val, tx_driver_val, lane, val;
u32 cfg_tap_val, tx_drv_brdct, tx_equal;
/* Hold rxSeqStart */
bnx2x_cl45_read_or_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_DSC2B0_DSC_MISC_CTRL0, 0x8000);
......@@ -3953,23 +3958,33 @@ static void bnx2x_warpcore_set_10G_XFI(struct bnx2x_phy *phy,
if (is_xfi) {
misc1_val |= 0x5;
tap_val = ((0x08 << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) |
(0x37 << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) |
(0x00 << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET));
tx_driver_val =
((0x00 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) |
(0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) |
(0x03 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET));
tap_val = WC_TX_FIR(0x08, 0x37, 0x00);
tx_driver_val = WC_TX_DRIVER(0x00, 0x02, 0x03);
} else {
cfg_tap_val = REG_RD(bp, params->shmem_base +
offsetof(struct shmem_region, dev_info.
port_hw_config[params->port].
sfi_tap_values));
tx_equal = cfg_tap_val & PORT_HW_CFG_TX_EQUALIZATION_MASK;
tx_drv_brdct = (cfg_tap_val &
PORT_HW_CFG_TX_DRV_BROADCAST_MASK) >>
PORT_HW_CFG_TX_DRV_BROADCAST_SHIFT;
misc1_val |= 0x9;
tap_val = ((0x0f << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) |
(0x2b << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) |
(0x02 << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET));
tx_driver_val =
((0x03 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) |
(0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) |
(0x06 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET));
/* TAP values are controlled by nvram, if value there isn't 0 */
if (tx_equal)
tap_val = (u16)tx_equal;
else
tap_val = WC_TX_FIR(0x0f, 0x2b, 0x02);
if (tx_drv_brdct)
tx_driver_val = WC_TX_DRIVER(0x03, (u16)tx_drv_brdct,
0x06);
else
tx_driver_val = WC_TX_DRIVER(0x03, 0x02, 0x06);
}
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_SERDESDIGITAL_MISC1, misc1_val);
......@@ -4106,15 +4121,11 @@ static void bnx2x_warpcore_set_20G_DXGXS(struct bnx2x *bp,
/* Set Transmit PMD settings */
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_TX_FIR_TAP,
((0x12 << MDIO_WC_REG_TX_FIR_TAP_POST_TAP_OFFSET) |
(0x2d << MDIO_WC_REG_TX_FIR_TAP_MAIN_TAP_OFFSET) |
(0x00 << MDIO_WC_REG_TX_FIR_TAP_PRE_TAP_OFFSET) |
(WC_TX_FIR(0x12, 0x2d, 0x00) |
MDIO_WC_REG_TX_FIR_TAP_ENABLE));
bnx2x_cl45_write(bp, phy, MDIO_WC_DEVAD,
MDIO_WC_REG_TX0_TX_DRIVER + 0x10*lane,
((0x02 << MDIO_WC_REG_TX0_TX_DRIVER_POST2_COEFF_OFFSET) |
(0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IDRIVER_OFFSET) |
(0x02 << MDIO_WC_REG_TX0_TX_DRIVER_IPRE_DRIVER_OFFSET)));
WC_TX_DRIVER(0x02, 0x02, 0x02));
}
static void bnx2x_warpcore_set_sgmii_speed(struct bnx2x_phy *phy,
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment