Merge branch 'for-linville' of git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx

drivers/net/wireless/wl12xx/Kconfig

@@ -3,7 +3,7 @@ menuconfig WL12XX_MENU
 	depends on MAC80211 && EXPERIMENTAL
 	---help---
 	  This will enable TI wl12xx driver support for the following chips:
-	  wl1271 and wl1273.
+	  wl1271, wl1273, wl1281 and wl1283.
 	  The drivers make use of the mac80211 stack.
 
 config WL12XX

drivers/net/wireless/wl12xx/acx.c

@@ -965,10 +965,13 @@ int wl1271_acx_ap_mem_cfg(struct wl1271 *wl)
 	}
 
 	/* memory config */
-	mem_conf->num_stations = wl->conf.mem.num_stations;
-	mem_conf->rx_mem_block_num = wl->conf.mem.rx_block_num;
-	mem_conf->tx_min_mem_block_num = wl->conf.mem.tx_min_block_num;
-	mem_conf->num_ssid_profiles = wl->conf.mem.ssid_profiles;
+	/* FIXME: for now we always use mem_wl127x for AP, because it
+	 * doesn't support dynamic memory and we don't have the
+	 * optimal values for wl128x without dynamic memory yet */
+	mem_conf->num_stations = wl->conf.mem_wl127x.num_stations;
+	mem_conf->rx_mem_block_num = wl->conf.mem_wl127x.rx_block_num;
+	mem_conf->tx_min_mem_block_num = wl->conf.mem_wl127x.tx_min_block_num;
+	mem_conf->num_ssid_profiles = wl->conf.mem_wl127x.ssid_profiles;
 	mem_conf->total_tx_descriptors = cpu_to_le32(ACX_TX_DESCRIPTORS);
 
 	ret = wl1271_cmd_configure(wl, ACX_MEM_CFG, mem_conf,
@@ -986,6 +989,7 @@ int wl1271_acx_ap_mem_cfg(struct wl1271 *wl)
 int wl1271_acx_sta_mem_cfg(struct wl1271 *wl)
 {
 	struct wl1271_acx_sta_config_memory *mem_conf;
+	struct conf_memory_settings *mem;
 	int ret;
 
 	wl1271_debug(DEBUG_ACX, "wl1271 mem cfg");
@@ -996,16 +1000,21 @@ int wl1271_acx_sta_mem_cfg(struct wl1271 *wl)
 		goto out;
 	}
 
+	if (wl->chip.id == CHIP_ID_1283_PG20)
+		mem = &wl->conf.mem_wl128x;
+	else
+		mem = &wl->conf.mem_wl127x;
+
 	/* memory config */
-	mem_conf->num_stations = wl->conf.mem.num_stations;
-	mem_conf->rx_mem_block_num = wl->conf.mem.rx_block_num;
-	mem_conf->tx_min_mem_block_num = wl->conf.mem.tx_min_block_num;
-	mem_conf->num_ssid_profiles = wl->conf.mem.ssid_profiles;
+	mem_conf->num_stations = mem->num_stations;
+	mem_conf->rx_mem_block_num = mem->rx_block_num;
+	mem_conf->tx_min_mem_block_num = mem->tx_min_block_num;
+	mem_conf->num_ssid_profiles = mem->ssid_profiles;
 	mem_conf->total_tx_descriptors = cpu_to_le32(ACX_TX_DESCRIPTORS);
-	mem_conf->dyn_mem_enable = wl->conf.mem.dynamic_memory;
-	mem_conf->tx_free_req = wl->conf.mem.min_req_tx_blocks;
-	mem_conf->rx_free_req = wl->conf.mem.min_req_rx_blocks;
-	mem_conf->tx_min = wl->conf.mem.tx_min;
+	mem_conf->dyn_mem_enable = mem->dynamic_memory;
+	mem_conf->tx_free_req = mem->min_req_tx_blocks;
+	mem_conf->rx_free_req = mem->min_req_rx_blocks;
+	mem_conf->tx_min = mem->tx_min;
 
 	ret = wl1271_cmd_configure(wl, ACX_MEM_CFG, mem_conf,
 				   sizeof(*mem_conf));
@@ -1019,6 +1028,32 @@ int wl1271_acx_sta_mem_cfg(struct wl1271 *wl)
 	return ret;
 }
 
+int wl1271_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap)
+{
+	struct wl1271_acx_host_config_bitmap *bitmap_conf;
+	int ret;
+
+	bitmap_conf = kzalloc(sizeof(*bitmap_conf), GFP_KERNEL);
+	if (!bitmap_conf) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	bitmap_conf->host_cfg_bitmap = cpu_to_le32(host_cfg_bitmap);
+
+	ret = wl1271_cmd_configure(wl, ACX_HOST_IF_CFG_BITMAP,
+				   bitmap_conf, sizeof(*bitmap_conf));
+	if (ret < 0) {
+		wl1271_warning("wl1271 bitmap config opt failed: %d", ret);
+		goto out;
+	}
+
+out:
+	kfree(bitmap_conf);
+
+	return ret;
+}
+
 int wl1271_acx_init_mem_config(struct wl1271 *wl)
 {
 	int ret;

drivers/net/wireless/wl12xx/acx.h

@@ -939,6 +939,16 @@ struct wl1271_acx_keep_alive_config {
 	u8 padding;
 } __packed;
 
+#define HOST_IF_CFG_RX_FIFO_ENABLE     BIT(0)
+#define HOST_IF_CFG_TX_EXTRA_BLKS_SWAP BIT(1)
+#define HOST_IF_CFG_TX_PAD_TO_SDIO_BLK BIT(3)
+
+struct wl1271_acx_host_config_bitmap {
+	struct acx_header header;
+
+	__le32 host_cfg_bitmap;
+} __packed;
+
 enum {
 	WL1271_ACX_TRIG_TYPE_LEVEL = 0,
 	WL1271_ACX_TRIG_TYPE_EDGE,
@@ -1275,6 +1285,7 @@ int wl1271_acx_tx_config_options(struct wl1271 *wl);
 int wl1271_acx_ap_mem_cfg(struct wl1271 *wl);
 int wl1271_acx_sta_mem_cfg(struct wl1271 *wl);
 int wl1271_acx_init_mem_config(struct wl1271 *wl);
+int wl1271_acx_host_if_cfg_bitmap(struct wl1271 *wl, u32 host_cfg_bitmap);
 int wl1271_acx_init_rx_interrupt(struct wl1271 *wl);
 int wl1271_acx_smart_reflex(struct wl1271 *wl);
 int wl1271_acx_bet_enable(struct wl1271 *wl, bool enable);

drivers/net/wireless/wl12xx/boot.c

@@ -22,6 +22,7 @@
  */
 
 #include <linux/slab.h>
+#include <linux/wl12xx.h>
 
 #include "acx.h"
 #include "reg.h"
@@ -243,16 +244,39 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 	if (wl->nvs == NULL)
 		return -ENODEV;
 
+	if (wl->chip.id == CHIP_ID_1283_PG20) {
+		struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
+
+		if (wl->nvs_len == sizeof(struct wl128x_nvs_file)) {
+			if (nvs->general_params.dual_mode_select)
+				wl->enable_11a = true;
+		} else {
+			wl1271_error("nvs size is not as expected: %zu != %zu",
+				     wl->nvs_len,
+				     sizeof(struct wl128x_nvs_file));
+			kfree(wl->nvs);
+			wl->nvs = NULL;
+			wl->nvs_len = 0;
+			return -EILSEQ;
+		}
+
+		/* only the first part of the NVS needs to be uploaded */
+		nvs_len = sizeof(nvs->nvs);
+		nvs_ptr = (u8 *)nvs->nvs;
+
+	} else {
+		struct wl1271_nvs_file *nvs =
+			(struct wl1271_nvs_file *)wl->nvs;
 		/*
-	 * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz band
-	 * configurations) can be removed when those NVS files stop floating
-	 * around.
+		 * FIXME: the LEGACY NVS image support (NVS's missing the 5GHz
+		 * band configurations) can be removed when those NVS files stop
+		 * floating around.
 		 */
 		if (wl->nvs_len == sizeof(struct wl1271_nvs_file) ||
 		    wl->nvs_len == WL1271_INI_LEGACY_NVS_FILE_SIZE) {
 			/* for now 11a is unsupported in AP mode */
 			if (wl->bss_type != BSS_TYPE_AP_BSS &&
-		    wl->nvs->general_params.dual_mode_select)
+			    nvs->general_params.dual_mode_select)
 				wl->enable_11a = true;
 		}
 
@@ -268,8 +292,9 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 		}
 
 		/* only the first part of the NVS needs to be uploaded */
-	nvs_len = sizeof(wl->nvs->nvs);
-	nvs_ptr = (u8 *)wl->nvs->nvs;
+		nvs_len = sizeof(nvs->nvs);
+		nvs_ptr = (u8 *) nvs->nvs;
+	}
 
 	/* update current MAC address to NVS */
 	nvs_ptr[11] = wl->mac_addr[0];
@@ -319,10 +344,13 @@ static int wl1271_boot_upload_nvs(struct wl1271 *wl)
 	/*
 	 * We've reached the first zero length, the first NVS table
 	 * is located at an aligned offset which is at least 7 bytes further.
+	 * NOTE: The wl->nvs->nvs element must be first, in order to
+	 * simplify the casting, we assume it is at the beginning of
+	 * the wl->nvs structure.
 	 */
-	nvs_ptr = (u8 *)wl->nvs->nvs +
-			ALIGN(nvs_ptr - (u8 *)wl->nvs->nvs + 7, 4);
-	nvs_len -= nvs_ptr - (u8 *)wl->nvs->nvs;
+	nvs_ptr = (u8 *)wl->nvs +
+			ALIGN(nvs_ptr - (u8 *)wl->nvs + 7, 4);
+	nvs_len -= nvs_ptr - (u8 *)wl->nvs;
 
 	/* Now we must set the partition correctly */
 	wl1271_set_partition(wl, &part_table[PART_WORK]);
@@ -454,6 +482,8 @@ static int wl1271_boot_run_firmware(struct wl1271 *wl)
 
 	if (wl->bss_type == BSS_TYPE_AP_BSS)
 		wl->event_mask |= STA_REMOVE_COMPLETE_EVENT_ID;
+	else
+		wl->event_mask |= DUMMY_PACKET_EVENT_ID;
 
 	ret = wl1271_event_unmask(wl);
 	if (ret < 0) {
@@ -493,24 +523,159 @@ static void wl1271_boot_hw_version(struct wl1271 *wl)
 		wl->quirks |= WL12XX_QUIRK_END_OF_TRANSACTION;
 }
 
-/* uploads NVS and firmware */
-int wl1271_load_firmware(struct wl1271 *wl)
+static int wl128x_switch_tcxo_to_fref(struct wl1271 *wl)
 {
-	int ret = 0;
-	u32 tmp, clk, pause;
+	u16 spare_reg;
+
+	/* Mask bits [2] & [8:4] in the sys_clk_cfg register */
+	spare_reg = wl1271_top_reg_read(wl, WL_SPARE_REG);
+	if (spare_reg == 0xFFFF)
+		return -EFAULT;
+	spare_reg |= (BIT(3) | BIT(5) | BIT(6));
+	wl1271_top_reg_write(wl, WL_SPARE_REG, spare_reg);
+
+	/* Enable FREF_CLK_REQ & mux MCS and coex PLLs to FREF */
+	wl1271_top_reg_write(wl, SYS_CLK_CFG_REG,
+			     WL_CLK_REQ_TYPE_PG2 | MCS_PLL_CLK_SEL_FREF);
+
+	/* Delay execution for 15msec, to let the HW settle */
+	mdelay(15);
+
+	return 0;
+}
+
+static bool wl128x_is_tcxo_valid(struct wl1271 *wl)
+{
+	u16 tcxo_detection;
+
+	tcxo_detection = wl1271_top_reg_read(wl, TCXO_CLK_DETECT_REG);
+	if (tcxo_detection & TCXO_DET_FAILED)
+		return false;
+
+	return true;
+}
+
+static bool wl128x_is_fref_valid(struct wl1271 *wl)
+{
+	u16 fref_detection;
+
+	fref_detection = wl1271_top_reg_read(wl, FREF_CLK_DETECT_REG);
+	if (fref_detection & FREF_CLK_DETECT_FAIL)
+		return false;
+
+	return true;
+}
+
+static int wl128x_manually_configure_mcs_pll(struct wl1271 *wl)
+{
+	wl1271_top_reg_write(wl, MCS_PLL_M_REG, MCS_PLL_M_REG_VAL);
+	wl1271_top_reg_write(wl, MCS_PLL_N_REG, MCS_PLL_N_REG_VAL);
+	wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG, MCS_PLL_CONFIG_REG_VAL);
+
+	return 0;
+}
+
+static int wl128x_configure_mcs_pll(struct wl1271 *wl, int clk)
+{
+	u16 spare_reg;
+	u16 pll_config;
+	u8 input_freq;
+
+	/* Mask bits [3:1] in the sys_clk_cfg register */
+	spare_reg = wl1271_top_reg_read(wl, WL_SPARE_REG);
+	if (spare_reg == 0xFFFF)
+		return -EFAULT;
+	spare_reg |= BIT(2);
+	wl1271_top_reg_write(wl, WL_SPARE_REG, spare_reg);
+
+	/* Handle special cases of the TCXO clock */
+	if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_8 ||
+	    wl->tcxo_clock == WL12XX_TCXOCLOCK_33_6)
+		return wl128x_manually_configure_mcs_pll(wl);
+
+	/* Set the input frequency according to the selected clock source */
+	input_freq = (clk & 1) + 1;
+
+	pll_config = wl1271_top_reg_read(wl, MCS_PLL_CONFIG_REG);
+	if (pll_config == 0xFFFF)
+		return -EFAULT;
+	pll_config |= (input_freq << MCS_SEL_IN_FREQ_SHIFT);
+	pll_config |= MCS_PLL_ENABLE_HP;
+	wl1271_top_reg_write(wl, MCS_PLL_CONFIG_REG, pll_config);
+
+	return 0;
+}
+
+/*
+ * WL128x has two clocks input - TCXO and FREF.
+ * TCXO is the main clock of the device, while FREF is used to sync
+ * between the GPS and the cellular modem.
+ * In cases where TCXO is 32.736MHz or 16.368MHz, the FREF will be used
+ * as the WLAN/BT main clock.
+ */
+static int wl128x_boot_clk(struct wl1271 *wl, int *selected_clock)
+{
+	u16 sys_clk_cfg;
+
+	/* For XTAL-only modes, FREF will be used after switching from TCXO */
+	if (wl->ref_clock == WL12XX_REFCLOCK_26_XTAL ||
+	    wl->ref_clock == WL12XX_REFCLOCK_38_XTAL) {
+		if (!wl128x_switch_tcxo_to_fref(wl))
+			return -EINVAL;
+		goto fref_clk;
+	}
+
+	/* Query the HW, to determine which clock source we should use */
+	sys_clk_cfg = wl1271_top_reg_read(wl, SYS_CLK_CFG_REG);
+	if (sys_clk_cfg == 0xFFFF)
+		return -EINVAL;
+	if (sys_clk_cfg & PRCM_CM_EN_MUX_WLAN_FREF)
+		goto fref_clk;
+
+	/* If TCXO is either 32.736MHz or 16.368MHz, switch to FREF */
+	if (wl->tcxo_clock == WL12XX_TCXOCLOCK_16_368 ||
+	    wl->tcxo_clock == WL12XX_TCXOCLOCK_32_736) {
+		if (!wl128x_switch_tcxo_to_fref(wl))
+			return -EINVAL;
+		goto fref_clk;
+	}
+
+	/* TCXO clock is selected */
+	if (!wl128x_is_tcxo_valid(wl))
+		return -EINVAL;
+	*selected_clock = wl->tcxo_clock;
+	goto config_mcs_pll;
+
+fref_clk:
+	/* FREF clock is selected */
+	if (!wl128x_is_fref_valid(wl))
+		return -EINVAL;
+	*selected_clock = wl->ref_clock;
+
+config_mcs_pll:
+	return wl128x_configure_mcs_pll(wl, *selected_clock);
+}
+
+static int wl127x_boot_clk(struct wl1271 *wl)
+{
+	u32 pause;
+	u32 clk;
 
 	wl1271_boot_hw_version(wl);
 
-	if (wl->ref_clock == 0 || wl->ref_clock == 2 || wl->ref_clock == 4)
+	if (wl->ref_clock == CONF_REF_CLK_19_2_E ||
+	    wl->ref_clock == CONF_REF_CLK_38_4_E ||
+	    wl->ref_clock == CONF_REF_CLK_38_4_M_XTAL)
 		/* ref clk: 19.2/38.4/38.4-XTAL */
 		clk = 0x3;
-	else if (wl->ref_clock == 1 || wl->ref_clock == 3)
+	else if (wl->ref_clock == CONF_REF_CLK_26_E ||
+		 wl->ref_clock == CONF_REF_CLK_52_E)
 		/* ref clk: 26/52 */
 		clk = 0x5;
 	else
 		return -EINVAL;
 
-	if (wl->ref_clock != 0) {
+	if (wl->ref_clock != CONF_REF_CLK_19_2_E) {
 		u16 val;
 		/* Set clock type (open drain) */
 		val = wl1271_top_reg_read(wl, OCP_REG_CLK_TYPE);
@@ -540,6 +705,26 @@ int wl1271_load_firmware(struct wl1271 *wl)
 	pause |= WU_COUNTER_PAUSE_VAL;
 	wl1271_write32(wl, WU_COUNTER_PAUSE, pause);
 
+	return 0;
+}
+
+/* uploads NVS and firmware */
+int wl1271_load_firmware(struct wl1271 *wl)
+{
+	int ret = 0;
+	u32 tmp, clk;
+	int selected_clock = -1;
+
+	if (wl->chip.id == CHIP_ID_1283_PG20) {
+		ret = wl128x_boot_clk(wl, &selected_clock);
+		if (ret < 0)
+			goto out;
+	} else {
+		ret = wl127x_boot_clk(wl);
+		if (ret < 0)
+			goto out;
+	}
+
 	/* Continue the ELP wake up sequence */
 	wl1271_write32(wl, WELP_ARM_COMMAND, WELP_ARM_COMMAND_VAL);
 	udelay(500);
@@ -555,7 +740,12 @@ int wl1271_load_firmware(struct wl1271 *wl)
 
 	wl1271_debug(DEBUG_BOOT, "clk2 0x%x", clk);
 
+	if (wl->chip.id == CHIP_ID_1283_PG20) {
+		clk |= ((selected_clock & 0x3) << 1) << 4;
+	} else {
 		clk |= (wl->ref_clock << 1) << 4;
+	}
+
 	wl1271_write32(wl, DRPW_SCRATCH_START, clk);
 
 	wl1271_set_partition(wl, &part_table[PART_WORK]);
@@ -585,16 +775,12 @@ int wl1271_load_firmware(struct wl1271 *wl)
 	/* 6. read the EEPROM parameters */
 	tmp = wl1271_read32(wl, SCR_PAD2);
 
-	ret = wl1271_boot_write_irq_polarity(wl);
-	if (ret < 0)
-		goto out;
-
-	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
-		       WL1271_ACX_ALL_EVENTS_VECTOR);
-
 	/* WL1271: The reference driver skips steps 7 to 10 (jumps directly
 	 * to upload_fw) */
 
+	if (wl->chip.id == CHIP_ID_1283_PG20)
+		wl1271_top_reg_write(wl, SDIO_IO_DS, wl->conf.hci_io_ds);
+
 	ret = wl1271_boot_upload_firmware(wl);
 	if (ret < 0)
 		goto out;
@@ -618,6 +804,13 @@ int wl1271_boot(struct wl1271 *wl)
 	if (ret < 0)
 		goto out;
 
+	ret = wl1271_boot_write_irq_polarity(wl);
+	if (ret < 0)
+		goto out;
+
+	wl1271_write32(wl, ACX_REG_INTERRUPT_MASK,
+		       WL1271_ACX_ALL_EVENTS_VECTOR);
+
 	/* Enable firmware interrupts now */
 	wl1271_boot_enable_interrupts(wl);
 

drivers/net/wireless/wl12xx/boot.h

@@ -74,4 +74,56 @@ struct wl1271_static_data {
 #define FREF_CLK_POLARITY_BITS 0xfffff8ff
 #define CLK_REQ_OUTN_SEL       0x700
 
+/* PLL configuration algorithm for wl128x */
+#define SYS_CLK_CFG_REG              0x2200
+/* Bit[0]   -  0-TCXO,  1-FREF */
+#define MCS_PLL_CLK_SEL_FREF         BIT(0)
+/* Bit[3:2] - 01-TCXO, 10-FREF */
+#define WL_CLK_REQ_TYPE_FREF         BIT(3)
+#define WL_CLK_REQ_TYPE_PG2          (BIT(3) | BIT(2))
+/* Bit[4]   -  0-TCXO,  1-FREF */
+#define PRCM_CM_EN_MUX_WLAN_FREF     BIT(4)
+
+#define TCXO_ILOAD_INT_REG           0x2264
+#define TCXO_CLK_DETECT_REG          0x2266
+
+#define TCXO_DET_FAILED              BIT(4)
+
+#define FREF_ILOAD_INT_REG           0x2084
+#define FREF_CLK_DETECT_REG          0x2086
+#define FREF_CLK_DETECT_FAIL         BIT(4)
+
+/* Use this reg for masking during driver access */
+#define WL_SPARE_REG                 0x2320
+#define WL_SPARE_VAL                 BIT(2)
+/* Bit[6:5:3] -  mask wl write SYS_CLK_CFG[8:5:2:4] */
+#define WL_SPARE_MASK_8526           (BIT(6) | BIT(5) | BIT(3))
+
+#define PLL_LOCK_COUNTERS_REG        0xD8C
+#define PLL_LOCK_COUNTERS_COEX       0x0F
+#define PLL_LOCK_COUNTERS_MCS        0xF0
+#define MCS_PLL_OVERRIDE_REG         0xD90
+#define MCS_PLL_CONFIG_REG           0xD92
+#define MCS_SEL_IN_FREQ_MASK         0x0070
+#define MCS_SEL_IN_FREQ_SHIFT        4
+#define MCS_PLL_CONFIG_REG_VAL       0x73
+#define MCS_PLL_ENABLE_HP            (BIT(0) | BIT(1))
+
+#define MCS_PLL_M_REG                0xD94
+#define MCS_PLL_N_REG                0xD96
+#define MCS_PLL_M_REG_VAL            0xC8
+#define MCS_PLL_N_REG_VAL            0x07
+
+#define SDIO_IO_DS                   0xd14
+
+/* SDIO/wSPI DS configuration values */
+enum {
+	HCI_IO_DS_8MA = 0,
+	HCI_IO_DS_4MA = 1, /* default */
+	HCI_IO_DS_6MA = 2,
+	HCI_IO_DS_2MA = 3,
+};
+
+/* end PLL configuration algorithm for wl128x */
+
 #endif

drivers/net/wireless/wl12xx/cmd.c

@@ -110,7 +110,47 @@ int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 int wl1271_cmd_general_parms(struct wl1271 *wl)
 {
 	struct wl1271_general_parms_cmd *gen_parms;
-	struct wl1271_ini_general_params *gp = &wl->nvs->general_params;
+	struct wl1271_ini_general_params *gp =
+		&((struct wl1271_nvs_file *)wl->nvs)->general_params;
+	bool answer = false;
+	int ret;
+
+	if (!wl->nvs)
+		return -ENODEV;
+
+	gen_parms = kzalloc(sizeof(*gen_parms), GFP_KERNEL);
+	if (!gen_parms)
+		return -ENOMEM;
+
+	gen_parms->test.id = TEST_CMD_INI_FILE_GENERAL_PARAM;
+
+	memcpy(&gen_parms->general_params, gp, sizeof(*gp));
+
+	if (gp->tx_bip_fem_auto_detect)
+		answer = true;
+
+	ret = wl1271_cmd_test(wl, gen_parms, sizeof(*gen_parms), answer);
+	if (ret < 0) {
+		wl1271_warning("CMD_INI_FILE_GENERAL_PARAM failed");
+		goto out;
+	}
+
+	gp->tx_bip_fem_manufacturer =
+		gen_parms->general_params.tx_bip_fem_manufacturer;
+
+	wl1271_debug(DEBUG_CMD, "FEM autodetect: %s, manufacturer: %d\n",
+		     answer ? "auto" : "manual", gp->tx_bip_fem_manufacturer);
+
+out:
+	kfree(gen_parms);
+	return ret;
+}
+
+int wl128x_cmd_general_parms(struct wl1271 *wl)
+{
+	struct wl128x_general_parms_cmd *gen_parms;
+	struct wl128x_ini_general_params *gp =
+		&((struct wl128x_nvs_file *)wl->nvs)->general_params;
 	bool answer = false;
 	int ret;
 
@@ -147,8 +187,9 @@ int wl1271_cmd_general_parms(struct wl1271 *wl)
 
 int wl1271_cmd_radio_parms(struct wl1271 *wl)
 {
+	struct wl1271_nvs_file *nvs = (struct wl1271_nvs_file *)wl->nvs;
 	struct wl1271_radio_parms_cmd *radio_parms;
-	struct wl1271_ini_general_params *gp = &wl->nvs->general_params;
+	struct wl1271_ini_general_params *gp = &nvs->general_params;
 	int ret;
 
 	if (!wl->nvs)
@@ -161,18 +202,18 @@ int wl1271_cmd_radio_parms(struct wl1271 *wl)
 	radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
 
 	/* 2.4GHz parameters */
-	memcpy(&radio_parms->static_params_2, &wl->nvs->stat_radio_params_2,
+	memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2,
 	       sizeof(struct wl1271_ini_band_params_2));
 	memcpy(&radio_parms->dyn_params_2,
-	       &wl->nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
+	       &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
 	       sizeof(struct wl1271_ini_fem_params_2));
 
 	/* 5GHz parameters */
 	memcpy(&radio_parms->static_params_5,
-	       &wl->nvs->stat_radio_params_5,
+	       &nvs->stat_radio_params_5,
 	       sizeof(struct wl1271_ini_band_params_5));
 	memcpy(&radio_parms->dyn_params_5,
-	       &wl->nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
+	       &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
 	       sizeof(struct wl1271_ini_fem_params_5));
 
 	wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
@@ -186,6 +227,50 @@ int wl1271_cmd_radio_parms(struct wl1271 *wl)
 	return ret;
 }
 
+int wl128x_cmd_radio_parms(struct wl1271 *wl)
+{
+	struct wl128x_nvs_file *nvs = (struct wl128x_nvs_file *)wl->nvs;
+	struct wl128x_radio_parms_cmd *radio_parms;
+	struct wl128x_ini_general_params *gp = &nvs->general_params;
+	int ret;
+
+	if (!wl->nvs)
+		return -ENODEV;
+
+	radio_parms = kzalloc(sizeof(*radio_parms), GFP_KERNEL);
+	if (!radio_parms)
+		return -ENOMEM;
+
+	radio_parms->test.id = TEST_CMD_INI_FILE_RADIO_PARAM;
+
+	/* 2.4GHz parameters */
+	memcpy(&radio_parms->static_params_2, &nvs->stat_radio_params_2,
+	       sizeof(struct wl128x_ini_band_params_2));
+	memcpy(&radio_parms->dyn_params_2,
+	       &nvs->dyn_radio_params_2[gp->tx_bip_fem_manufacturer].params,
+	       sizeof(struct wl128x_ini_fem_params_2));
+
+	/* 5GHz parameters */
+	memcpy(&radio_parms->static_params_5,
+	       &nvs->stat_radio_params_5,
+	       sizeof(struct wl128x_ini_band_params_5));
+	memcpy(&radio_parms->dyn_params_5,
+	       &nvs->dyn_radio_params_5[gp->tx_bip_fem_manufacturer].params,
+	       sizeof(struct wl128x_ini_fem_params_5));
+
+	radio_parms->fem_vendor_and_options = nvs->fem_vendor_and_options;
+
+	wl1271_dump(DEBUG_CMD, "TEST_CMD_INI_FILE_RADIO_PARAM: ",
+		    radio_parms, sizeof(*radio_parms));
+
+	ret = wl1271_cmd_test(wl, radio_parms, sizeof(*radio_parms), 0);
+	if (ret < 0)
+		wl1271_warning("CMD_INI_FILE_RADIO_PARAM failed");
+
+	kfree(radio_parms);
+	return ret;
+}
+
 int wl1271_cmd_ext_radio_parms(struct wl1271 *wl)
 {
 	struct wl1271_ext_radio_parms_cmd *ext_radio_parms;

drivers/net/wireless/wl12xx/cmd.h

@@ -32,7 +32,9 @@ struct acx_header;
 int wl1271_cmd_send(struct wl1271 *wl, u16 id, void *buf, size_t len,
 		    size_t res_len);
 int wl1271_cmd_general_parms(struct wl1271 *wl);
+int wl128x_cmd_general_parms(struct wl1271 *wl);
 int wl1271_cmd_radio_parms(struct wl1271 *wl);
+int wl128x_cmd_radio_parms(struct wl1271 *wl);
 int wl1271_cmd_ext_radio_parms(struct wl1271 *wl);
 int wl1271_cmd_join(struct wl1271 *wl, u8 bss_type);
 int wl1271_cmd_test(struct wl1271 *wl, void *buf, size_t buf_len, u8 answer);
@@ -415,6 +417,21 @@ struct wl1271_general_parms_cmd {
 	u8 padding[3];
 } __packed;
 
+struct wl128x_general_parms_cmd {
+	struct wl1271_cmd_header header;
+
+	struct wl1271_cmd_test_header test;
+
+	struct wl128x_ini_general_params general_params;
+
+	u8 sr_debug_table[WL1271_INI_MAX_SMART_REFLEX_PARAM];
+	u8 sr_sen_n_p;
+	u8 sr_sen_n_p_gain;
+	u8 sr_sen_nrn;
+	u8 sr_sen_prn;
+	u8 padding[3];
+} __packed;
+
 struct wl1271_radio_parms_cmd {
 	struct wl1271_cmd_header header;
 
@@ -431,6 +448,23 @@ struct wl1271_radio_parms_cmd {
 	u8 padding3[2];
 } __packed;
 
+struct wl128x_radio_parms_cmd {
+	struct wl1271_cmd_header header;
+
+	struct wl1271_cmd_test_header test;
+
+	/* Static radio parameters */
+	struct wl128x_ini_band_params_2 static_params_2;
+	struct wl128x_ini_band_params_5 static_params_5;
+
+	u8 fem_vendor_and_options;
+
+	/* Dynamic radio parameters */
+	struct wl128x_ini_fem_params_2 dyn_params_2;
+	u8 padding2;
+	struct wl128x_ini_fem_params_5 dyn_params_5;
+} __packed;
+
 struct wl1271_ext_radio_parms_cmd {
 	struct wl1271_cmd_header header;
 

drivers/net/wireless/wl12xx/conf.h

@@ -1004,7 +1004,9 @@ enum {
 	CONF_REF_CLK_19_2_E,
 	CONF_REF_CLK_26_E,
 	CONF_REF_CLK_38_4_E,
-	CONF_REF_CLK_52_E
+	CONF_REF_CLK_52_E,
+	CONF_REF_CLK_38_4_M_XTAL,
+	CONF_REF_CLK_26_M_XTAL,
 };
 
 enum single_dual_band_enum {
@@ -1018,15 +1020,6 @@ enum single_dual_band_enum {
 #define CONF_NUMBER_OF_CHANNELS_2_4 14
 #define CONF_NUMBER_OF_CHANNELS_5   35
 
-struct conf_radio_parms {
-	/*
-	 * FEM parameter set to use
-	 *
-	 * Range: 0 or 1
-	 */
-	u8 fem;
-};
-
 struct conf_itrim_settings {
 	/* enable dco itrim */
 	u8 enable;
@@ -1202,7 +1195,9 @@ struct conf_drv_settings {
 	struct conf_scan_settings scan;
 	struct conf_rf_settings rf;
 	struct conf_ht_setting ht;
-	struct conf_memory_settings mem;
+	struct conf_memory_settings mem_wl127x;
+	struct conf_memory_settings mem_wl128x;
+	u8 hci_io_ds;
 };
 
 #endif

drivers/net/wireless/wl12xx/debugfs.c

@@ -267,7 +267,7 @@ static ssize_t gpio_power_write(struct file *file,
 	}
 	buf[len] = '\0';
 
-	ret = strict_strtoul(buf, 0, &value);
+	ret = kstrtoul(buf, 0, &value);
 	if (ret < 0) {
 		wl1271_warning("illegal value in gpio_power");
 		return -EINVAL;

drivers/net/wireless/wl12xx/event.c

@@ -33,6 +33,7 @@ void wl1271_pspoll_work(struct work_struct *work)
 {
 	struct delayed_work *dwork;
 	struct wl1271 *wl;
+	int ret;
 
 	dwork = container_of(work, struct delayed_work, work);
 	wl = container_of(dwork, struct wl1271, pspoll_work);
@@ -55,8 +56,13 @@ void wl1271_pspoll_work(struct work_struct *work)
 	 * delivery failure occurred, and no-one changed state since, so
 	 * we should go back to powersave.
 	 */
+	ret = wl1271_ps_elp_wakeup(wl);
+	if (ret < 0)
+		goto out;
+
 	wl1271_ps_set_mode(wl, STATION_POWER_SAVE_MODE, wl->basic_rate, true);
 
+	wl1271_ps_elp_sleep(wl);
 out:
 	mutex_unlock(&wl->mutex);
 };
@@ -129,11 +135,6 @@ static int wl1271_event_ps_report(struct wl1271 *wl,
 
 		/* enable beacon early termination */
 		ret = wl1271_acx_bet_enable(wl, true);
-		if (ret < 0)
-			break;
-
-		/* go to extremely low power mode */
-		wl1271_ps_elp_sleep(wl);
 		break;
 	default:
 		break;
@@ -228,6 +229,12 @@ static int wl1271_event_process(struct wl1271 *wl, struct event_mailbox *mbox)
 			wl1271_event_rssi_trigger(wl, mbox);
 	}
 
+	if ((vector & DUMMY_PACKET_EVENT_ID) && !is_ap) {
+		wl1271_debug(DEBUG_EVENT, "DUMMY_PACKET_ID_EVENT_ID");
+		if (wl->vif)
+			wl1271_tx_dummy_packet(wl);
+	}
+
 	if (wl->vif && beacon_loss)
 		ieee80211_connection_loss(wl->vif);
 

drivers/net/wireless/wl12xx/event.h

@@ -59,7 +59,10 @@ enum {
 	BSS_LOSE_EVENT_ID			 = BIT(18),
 	REGAINED_BSS_EVENT_ID			 = BIT(19),
 	ROAMING_TRIGGER_MAX_TX_RETRY_EVENT_ID	 = BIT(20),
-	STA_REMOVE_COMPLETE_EVENT_ID		 = BIT(21), /* AP */
+	/* STA: dummy paket for dynamic mem blocks */
+	DUMMY_PACKET_EVENT_ID                    = BIT(21),
+	/* AP: STA remove complete */
+	STA_REMOVE_COMPLETE_EVENT_ID             = BIT(21),
 	SOFT_GEMINI_SENSE_EVENT_ID		 = BIT(22),
 	SOFT_GEMINI_PREDICTION_EVENT_ID		 = BIT(23),
 	SOFT_GEMINI_AVALANCHE_EVENT_ID		 = BIT(24),

drivers/net/wireless/wl12xx/ini.h

@@ -41,6 +41,28 @@ struct wl1271_ini_general_params {
 	u8 srf3[WL1271_INI_MAX_SMART_REFLEX_PARAM];
 } __packed;
 
+#define WL128X_INI_MAX_SETTINGS_PARAM 4
+
+struct wl128x_ini_general_params {
+	u8 ref_clock;
+	u8 settling_time;
+	u8 clk_valid_on_wakeup;
+	u8 tcxo_ref_clock;
+	u8 tcxo_settling_time;
+	u8 tcxo_valid_on_wakeup;
+	u8 tcxo_ldo_voltage;
+	u8 xtal_itrim_val;
+	u8 platform_conf;
+	u8 dual_mode_select;
+	u8 tx_bip_fem_auto_detect;
+	u8 tx_bip_fem_manufacturer;
+	u8 general_settings[WL128X_INI_MAX_SETTINGS_PARAM];
+	u8 sr_state;
+	u8 srf1[WL1271_INI_MAX_SMART_REFLEX_PARAM];
+	u8 srf2[WL1271_INI_MAX_SMART_REFLEX_PARAM];
+	u8 srf3[WL1271_INI_MAX_SMART_REFLEX_PARAM];
+} __packed;
+
 #define WL1271_INI_RSSI_PROCESS_COMPENS_SIZE 15
 
 struct wl1271_ini_band_params_2 {
@@ -49,9 +71,16 @@ struct wl1271_ini_band_params_2 {
 	u8 rx_rssi_process_compens[WL1271_INI_RSSI_PROCESS_COMPENS_SIZE];
 } __packed;
 
-#define WL1271_INI_RATE_GROUP_COUNT 6
 #define WL1271_INI_CHANNEL_COUNT_2 14
 
+struct wl128x_ini_band_params_2 {
+	u8 rx_trace_insertion_loss;
+	u8 tx_trace_loss[WL1271_INI_CHANNEL_COUNT_2];
+	u8 rx_rssi_process_compens[WL1271_INI_RSSI_PROCESS_COMPENS_SIZE];
+} __packed;
+
+#define WL1271_INI_RATE_GROUP_COUNT 6
+
 struct wl1271_ini_fem_params_2 {
 	__le16 tx_bip_ref_pd_voltage;
 	u8 tx_bip_ref_power;
@@ -68,6 +97,28 @@ struct wl1271_ini_fem_params_2 {
 	u8 normal_to_degraded_high_thr;
 } __packed;
 
+#define WL128X_INI_RATE_GROUP_COUNT 7
+/* low and high temperatures */
+#define WL128X_INI_PD_VS_TEMPERATURE_RANGES 2
+
+struct wl128x_ini_fem_params_2 {
+	__le16 tx_bip_ref_pd_voltage;
+	u8 tx_bip_ref_power;
+	u8 tx_bip_ref_offset;
+	u8 tx_per_rate_pwr_limits_normal[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_per_rate_pwr_limits_degraded[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_per_rate_pwr_limits_extreme[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_per_chan_pwr_limits_11b[WL1271_INI_CHANNEL_COUNT_2];
+	u8 tx_per_chan_pwr_limits_ofdm[WL1271_INI_CHANNEL_COUNT_2];
+	u8 tx_pd_vs_rate_offsets[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_ibias[WL128X_INI_RATE_GROUP_COUNT + 1];
+	u8 tx_pd_vs_chan_offsets[WL1271_INI_CHANNEL_COUNT_2];
+	u8 tx_pd_vs_temperature[WL128X_INI_PD_VS_TEMPERATURE_RANGES];
+	u8 rx_fem_insertion_loss;
+	u8 degraded_low_to_normal_thr;
+	u8 normal_to_degraded_high_thr;
+} __packed;
+
 #define WL1271_INI_CHANNEL_COUNT_5 35
 #define WL1271_INI_SUB_BAND_COUNT_5 7
 
@@ -77,6 +128,12 @@ struct wl1271_ini_band_params_5 {
 	u8 rx_rssi_process_compens[WL1271_INI_RSSI_PROCESS_COMPENS_SIZE];
 } __packed;
 
+struct wl128x_ini_band_params_5 {
+	u8 rx_trace_insertion_loss[WL1271_INI_SUB_BAND_COUNT_5];
+	u8 tx_trace_loss[WL1271_INI_CHANNEL_COUNT_5];
+	u8 rx_rssi_process_compens[WL1271_INI_RSSI_PROCESS_COMPENS_SIZE];
+} __packed;
+
 struct wl1271_ini_fem_params_5 {
 	__le16 tx_bip_ref_pd_voltage[WL1271_INI_SUB_BAND_COUNT_5];
 	u8 tx_bip_ref_power[WL1271_INI_SUB_BAND_COUNT_5];
@@ -92,6 +149,23 @@ struct wl1271_ini_fem_params_5 {
 	u8 normal_to_degraded_high_thr;
 } __packed;
 
+struct wl128x_ini_fem_params_5 {
+	__le16 tx_bip_ref_pd_voltage[WL1271_INI_SUB_BAND_COUNT_5];
+	u8 tx_bip_ref_power[WL1271_INI_SUB_BAND_COUNT_5];
+	u8 tx_bip_ref_offset[WL1271_INI_SUB_BAND_COUNT_5];
+	u8 tx_per_rate_pwr_limits_normal[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_per_rate_pwr_limits_degraded[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_per_rate_pwr_limits_extreme[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_per_chan_pwr_limits_ofdm[WL1271_INI_CHANNEL_COUNT_5];
+	u8 tx_pd_vs_rate_offsets[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_ibias[WL128X_INI_RATE_GROUP_COUNT];
+	u8 tx_pd_vs_chan_offsets[WL1271_INI_CHANNEL_COUNT_5];
+	u8 tx_pd_vs_temperature[WL1271_INI_SUB_BAND_COUNT_5 *
+		WL128X_INI_PD_VS_TEMPERATURE_RANGES];
+	u8 rx_fem_insertion_loss[WL1271_INI_SUB_BAND_COUNT_5];
+	u8 degraded_low_to_normal_thr;
+	u8 normal_to_degraded_high_thr;
+} __packed;
 
 /* NVS data structure */
 #define WL1271_INI_NVS_SECTION_SIZE		     468
@@ -100,7 +174,7 @@ struct wl1271_ini_fem_params_5 {
 #define WL1271_INI_LEGACY_NVS_FILE_SIZE              800
 
 struct wl1271_nvs_file {
-	/* NVS section */
+	/* NVS section - must be first! */
 	u8 nvs[WL1271_INI_NVS_SECTION_SIZE];
 
 	/* INI section */
@@ -120,4 +194,24 @@ struct wl1271_nvs_file {
 	} dyn_radio_params_5[WL1271_INI_FEM_MODULE_COUNT];
 } __packed;
 
+struct wl128x_nvs_file {
+	/* NVS section - must be first! */
+	u8 nvs[WL1271_INI_NVS_SECTION_SIZE];
+
+	/* INI section */
+	struct wl128x_ini_general_params general_params;
+	u8 fem_vendor_and_options;
+	struct wl128x_ini_band_params_2 stat_radio_params_2;
+	u8 padding2;
+	struct {
+		struct wl128x_ini_fem_params_2 params;
+		u8 padding;
+	} dyn_radio_params_2[WL1271_INI_FEM_MODULE_COUNT];
+	struct wl128x_ini_band_params_5 stat_radio_params_5;
+	u8 padding3;
+	struct {
+		struct wl128x_ini_fem_params_5 params;
+		u8 padding;
+	} dyn_radio_params_5[WL1271_INI_FEM_MODULE_COUNT];
+} __packed;
 #endif

drivers/net/wireless/wl12xx/init.c

@@ -31,6 +31,7 @@
 #include "cmd.h"
 #include "reg.h"
 #include "tx.h"
+#include "io.h"
 
 int wl1271_sta_init_templates_config(struct wl1271 *wl)
 {
@@ -321,9 +322,11 @@ static int wl1271_sta_hw_init(struct wl1271 *wl)
 {
 	int ret;
 
+	if (wl->chip.id != CHIP_ID_1283_PG20) {
 		ret = wl1271_cmd_ext_radio_parms(wl);
 		if (ret < 0)
 			return ret;
+	}
 
 	/* PS config */
 	ret = wl1271_acx_config_ps(wl);
@@ -504,6 +507,27 @@ static int wl1271_set_ba_policies(struct wl1271 *wl)
 	return ret;
 }
 
+int wl1271_chip_specific_init(struct wl1271 *wl)
+{
+	int ret = 0;
+
+	if (wl->chip.id == CHIP_ID_1283_PG20) {
+		u32 host_cfg_bitmap = HOST_IF_CFG_RX_FIFO_ENABLE;
+
+		if (wl->quirks & WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT)
+			/* Enable SDIO padding */
+			host_cfg_bitmap |= HOST_IF_CFG_TX_PAD_TO_SDIO_BLK;
+
+		/* Must be before wl1271_acx_init_mem_config() */
+		ret = wl1271_acx_host_if_cfg_bitmap(wl, host_cfg_bitmap);
+		if (ret < 0)
+			goto out;
+	}
+out:
+	return ret;
+}
+
+
 int wl1271_hw_init(struct wl1271 *wl)
 {
 	struct conf_tx_ac_category *conf_ac;
@@ -511,14 +535,25 @@ int wl1271_hw_init(struct wl1271 *wl)
 	int ret, i;
 	bool is_ap = (wl->bss_type == BSS_TYPE_AP_BSS);
 
+	if (wl->chip.id == CHIP_ID_1283_PG20)
+		ret = wl128x_cmd_general_parms(wl);
+	else
 		ret = wl1271_cmd_general_parms(wl);
 	if (ret < 0)
 		return ret;
 
+	if (wl->chip.id == CHIP_ID_1283_PG20)
+		ret = wl128x_cmd_radio_parms(wl);
+	else
 		ret = wl1271_cmd_radio_parms(wl);
 	if (ret < 0)
 		return ret;
 
+	/* Chip-specific init */
+	ret = wl1271_chip_specific_init(wl);
+	if (ret < 0)
+		return ret;
+
 	/* Mode specific init */
 	if (is_ap)
 		ret = wl1271_ap_hw_init(wl);

drivers/net/wireless/wl12xx/init.h

@@ -31,6 +31,7 @@ int wl1271_sta_init_templates_config(struct wl1271 *wl);
 int wl1271_init_phy_config(struct wl1271 *wl);
 int wl1271_init_pta(struct wl1271 *wl);
 int wl1271_init_energy_detection(struct wl1271 *wl);
+int wl1271_chip_specific_init(struct wl1271 *wl);
 int wl1271_hw_init(struct wl1271 *wl);
 
 #endif

drivers/net/wireless/wl12xx/io.c

@@ -29,6 +29,7 @@
 #include "wl12xx.h"
 #include "wl12xx_80211.h"
 #include "io.h"
+#include "tx.h"
 
 #define OCP_CMD_LOOP  32
 
@@ -43,6 +44,16 @@
 #define OCP_STATUS_REQ_FAILED 0x20000
 #define OCP_STATUS_RESP_ERROR 0x30000
 
+bool wl1271_set_block_size(struct wl1271 *wl)
+{
+	if (wl->if_ops->set_block_size) {
+		wl->if_ops->set_block_size(wl, WL12XX_BUS_BLOCK_SIZE);
+		return true;
+	}
+
+	return false;
+}
+
 void wl1271_disable_interrupts(struct wl1271 *wl)
 {
 	wl->if_ops->disable_irq(wl);

drivers/net/wireless/wl12xx/io.h

@@ -169,5 +169,8 @@ int wl1271_init_ieee80211(struct wl1271 *wl);
 struct ieee80211_hw *wl1271_alloc_hw(void);
 int wl1271_free_hw(struct wl1271 *wl);
 irqreturn_t wl1271_irq(int irq, void *data);
+bool wl1271_set_block_size(struct wl1271 *wl);
+int wl1271_tx_dummy_packet(struct wl1271 *wl);
+void wl1271_configure_filters(struct wl1271 *wl, unsigned int filters);
 
 #endif

drivers/net/wireless/wl12xx/ps.c

@@ -149,9 +149,6 @@ int wl1271_ps_set_mode(struct wl1271 *wl, enum wl1271_cmd_ps_mode mode,
 	case STATION_ACTIVE_MODE:
 	default:
 		wl1271_debug(DEBUG_PSM, "leaving psm");
-		ret = wl1271_ps_elp_wakeup(wl);
-		if (ret < 0)
-			return ret;
 
 		/* disable beacon early termination */
 		ret = wl1271_acx_bet_enable(wl, false);

drivers/net/wireless/wl12xx/reg.h

@@ -207,6 +207,8 @@
 
 #define CHIP_ID_1271_PG10              (0x4030101)
 #define CHIP_ID_1271_PG20              (0x4030111)
+#define CHIP_ID_1283_PG10              (0x05030101)
+#define CHIP_ID_1283_PG20              (0x05030111)
 
 #define ENABLE                         (REGISTERS_BASE + 0x5450)
 
@@ -452,24 +454,11 @@
 #define HI_CFG_UART_TX_OUT_GPIO_14  0x00000200
 #define HI_CFG_UART_TX_OUT_GPIO_7   0x00000400
 
-/*
- * NOTE: USE_ACTIVE_HIGH compilation flag should be defined in makefile
- *       for platforms using active high interrupt level
- */
-#ifdef USE_ACTIVE_HIGH
 #define HI_CFG_DEF_VAL              \
 	(HI_CFG_UART_ENABLE |        \
 	HI_CFG_RST232_ENABLE |      \
 	HI_CFG_CLOCK_REQ_SELECT |   \
 	HI_CFG_HOST_INT_ENABLE)
-#else
-#define HI_CFG_DEF_VAL              \
-	(HI_CFG_UART_ENABLE |        \
-	HI_CFG_RST232_ENABLE |      \
-	HI_CFG_CLOCK_REQ_SELECT |   \
-	HI_CFG_HOST_INT_ENABLE)
-
-#endif
 
 #define REF_FREQ_19_2                       0
 #define REF_FREQ_26_0                       1

drivers/net/wireless/wl12xx/rx.c

@@ -48,18 +48,14 @@ static void wl1271_rx_status(struct wl1271 *wl,
 			     struct ieee80211_rx_status *status,
 			     u8 beacon)
 {
-	enum ieee80211_band desc_band;
-
 	memset(status, 0, sizeof(struct ieee80211_rx_status));
 
-	status->band = wl->band;
-
 	if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG)
-		desc_band = IEEE80211_BAND_2GHZ;
+		status->band = IEEE80211_BAND_2GHZ;
 	else
-		desc_band = IEEE80211_BAND_5GHZ;
+		status->band = IEEE80211_BAND_5GHZ;
 
-	status->rate_idx = wl1271_rate_to_idx(desc->rate, desc_band);
+	status->rate_idx = wl1271_rate_to_idx(desc->rate, status->band);
 
 #ifdef CONFIG_WL12XX_HT
 	/* 11n support */
@@ -76,7 +72,8 @@ static void wl1271_rx_status(struct wl1271 *wl,
 	 */
 	wl->noise = desc->rssi - (desc->snr >> 1);
 
-	status->freq = ieee80211_channel_to_frequency(desc->channel, desc_band);
+	status->freq = ieee80211_channel_to_frequency(desc->channel,
+						      status->band);
 
 	if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) {
 		status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
@@ -163,18 +160,25 @@ void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_common_status *status)
 			break;
 		}
 
+		if (wl->chip.id != CHIP_ID_1283_PG20) {
 			/*
 			 * Choose the block we want to read
-		 * For aggregated packets, only the first memory block should
-		 * be retrieved. The FW takes care of the rest.
+			 * For aggregated packets, only the first memory block
+			 * should be retrieved. The FW takes care of the rest.
 			 */
-		mem_block = wl1271_rx_get_mem_block(status, drv_rx_counter);
+			mem_block = wl1271_rx_get_mem_block(status,
+							    drv_rx_counter);
+
 			wl->rx_mem_pool_addr.addr = (mem_block << 8) +
 			   le32_to_cpu(wl_mem_map->packet_memory_pool_start);
+
 			wl->rx_mem_pool_addr.addr_extra =
 				wl->rx_mem_pool_addr.addr + 4;
-		wl1271_write(wl, WL1271_SLV_REG_DATA, &wl->rx_mem_pool_addr,
+
+			wl1271_write(wl, WL1271_SLV_REG_DATA,
+				     &wl->rx_mem_pool_addr,
 				     sizeof(wl->rx_mem_pool_addr), false);
+		}
 
 		/* Read all available packets at once */
 		wl1271_read(wl, WL1271_SLV_MEM_DATA, wl->aggr_buf,

drivers/net/wireless/wl12xx/scan.c

@@ -48,8 +48,7 @@ void wl1271_scan_complete_work(struct work_struct *work)
 		goto out;
 
 	wl->scan.state = WL1271_SCAN_STATE_IDLE;
-	kfree(wl->scan.scanned_ch);
-	wl->scan.scanned_ch = NULL;
+	memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch));
 	wl->scan.req = NULL;
 	ieee80211_scan_completed(wl->hw, false);
 
@@ -87,7 +86,7 @@ static int wl1271_get_scan_channels(struct wl1271 *wl,
 
 		flags = req->channels[i]->flags;
 
-		if (!wl->scan.scanned_ch[i] &&
+		if (!test_bit(i, wl->scan.scanned_ch) &&
 		    !(flags & IEEE80211_CHAN_DISABLED) &&
 		    ((!!(flags & IEEE80211_CHAN_PASSIVE_SCAN)) == passive) &&
 		    (req->channels[i]->band == band)) {
@@ -124,7 +123,7 @@ static int wl1271_get_scan_channels(struct wl1271 *wl,
 			memset(&channels[j].bssid_msb, 0xff, 2);
 
 			/* Mark the channels we already used */
-			wl->scan.scanned_ch[i] = true;
+			set_bit(i, wl->scan.scanned_ch);
 
 			j++;
 		}
@@ -291,6 +290,12 @@ void wl1271_scan_stm(struct wl1271 *wl)
 int wl1271_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len,
 		struct cfg80211_scan_request *req)
 {
+	/*
+	 * cfg80211 should guarantee that we don't get more channels
+	 * than what we have registered.
+	 */
+	BUG_ON(req->n_channels > WL1271_MAX_CHANNELS);
+
 	if (wl->scan.state != WL1271_SCAN_STATE_IDLE)
 		return -EBUSY;
 
@@ -304,10 +309,8 @@ int wl1271_scan(struct wl1271 *wl, const u8 *ssid, size_t ssid_len,
 	}
 
 	wl->scan.req = req;
+	memset(wl->scan.scanned_ch, 0, sizeof(wl->scan.scanned_ch));
 
-	wl->scan.scanned_ch = kcalloc(req->n_channels,
-				      sizeof(*wl->scan.scanned_ch),
-				      GFP_KERNEL);
 	/* we assume failure so that timeout scenarios are handled correctly */
 	wl->scan.failed = true;
 	ieee80211_queue_delayed_work(wl->hw, &wl->scan_complete_work,

drivers/net/wireless/wl12xx/sdio.c

@@ -51,6 +51,13 @@ static const struct sdio_device_id wl1271_devices[] = {
 };
 MODULE_DEVICE_TABLE(sdio, wl1271_devices);
 
+static void wl1271_sdio_set_block_size(struct wl1271 *wl, unsigned int blksz)
+{
+	sdio_claim_host(wl->if_priv);
+	sdio_set_block_size(wl->if_priv, blksz);
+	sdio_release_host(wl->if_priv);
+}
+
 static inline struct sdio_func *wl_to_func(struct wl1271 *wl)
 {
 	return wl->if_priv;
@@ -203,7 +210,8 @@ static struct wl1271_if_operations sdio_ops = {
 	.power		= wl1271_sdio_set_power,
 	.dev		= wl1271_sdio_wl_to_dev,
 	.enable_irq	= wl1271_sdio_enable_interrupts,
-	.disable_irq	= wl1271_sdio_disable_interrupts
+	.disable_irq	= wl1271_sdio_disable_interrupts,
+	.set_block_size = wl1271_sdio_set_block_size,
 };
 
 static int __devinit wl1271_probe(struct sdio_func *func,
@@ -212,6 +220,7 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 	struct ieee80211_hw *hw;
 	const struct wl12xx_platform_data *wlan_data;
 	struct wl1271 *wl;
+	unsigned long irqflags;
 	int ret;
 
 	/* We are only able to handle the wlan function */
@@ -230,6 +239,9 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 	/* Grab access to FN0 for ELP reg. */
 	func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
 
+	/* Use block mode for transferring over one block size of data */
+	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+
 	wlan_data = wl12xx_get_platform_data();
 	if (IS_ERR(wlan_data)) {
 		ret = PTR_ERR(wlan_data);
@@ -239,9 +251,16 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 
 	wl->irq = wlan_data->irq;
 	wl->ref_clock = wlan_data->board_ref_clock;
+	wl->tcxo_clock = wlan_data->board_tcxo_clock;
+	wl->platform_quirks = wlan_data->platform_quirks;
+
+	if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
+		irqflags = IRQF_TRIGGER_RISING;
+	else
+		irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
 
 	ret = request_threaded_irq(wl->irq, wl1271_hardirq, wl1271_irq,
-				   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+				   irqflags,
 				   DRIVER_NAME, wl);
 	if (ret < 0) {
 		wl1271_error("request_irq() failed: %d", ret);
@@ -343,4 +362,6 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
 MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
 MODULE_FIRMWARE(WL1271_FW_NAME);
-MODULE_FIRMWARE(WL1271_AP_FW_NAME);
+MODULE_FIRMWARE(WL128X_FW_NAME);
+MODULE_FIRMWARE(WL127X_AP_FW_NAME);
+MODULE_FIRMWARE(WL128X_AP_FW_NAME);

drivers/net/wireless/wl12xx/sdio_test.c

@@ -189,7 +189,12 @@ static int wl1271_fetch_firmware(struct wl1271 *wl)
 	const struct firmware *fw;
 	int ret;
 
-	ret = request_firmware(&fw, WL1271_FW_NAME, wl1271_wl_to_dev(wl));
+	if (wl->chip.id == CHIP_ID_1283_PG20)
+		ret = request_firmware(&fw, WL128X_FW_NAME,
+				       wl1271_wl_to_dev(wl));
+	else
+		ret = request_firmware(&fw, WL1271_FW_NAME,
+				       wl1271_wl_to_dev(wl));
 
 	if (ret < 0) {
 		wl1271_error("could not get firmware: %d", ret);
@@ -227,14 +232,14 @@ static int wl1271_fetch_nvs(struct wl1271 *wl)
 	const struct firmware *fw;
 	int ret;
 
-	ret = request_firmware(&fw, WL1271_NVS_NAME, wl1271_wl_to_dev(wl));
+	ret = request_firmware(&fw, WL12XX_NVS_NAME, wl1271_wl_to_dev(wl));
 
 	if (ret < 0) {
 		wl1271_error("could not get nvs file: %d", ret);
 		return ret;
 	}
 
-	wl->nvs = kmemdup(fw->data, sizeof(struct wl1271_nvs_file), GFP_KERNEL);
+	wl->nvs = kmemdup(fw->data, fw->size, GFP_KERNEL);
 
 	if (!wl->nvs) {
 		wl1271_error("could not allocate memory for the nvs file");
@@ -288,6 +293,11 @@ static int wl1271_chip_wakeup(struct wl1271 *wl)
 		wl1271_notice("chip id 0x%x (1271 PG20)",
 				wl->chip.id);
 		break;
+	case CHIP_ID_1283_PG20:
+		wl1271_notice("chip id 0x%x (1283 PG20)",
+				wl->chip.id);
+		break;
+	case CHIP_ID_1283_PG10:
 	default:
 		wl1271_warning("unsupported chip id: 0x%x", wl->chip.id);
 		return -ENODEV;
@@ -407,6 +417,9 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 	/* Grab access to FN0 for ELP reg. */
 	func->card->quirks |= MMC_QUIRK_LENIENT_FN0;
 
+	/* Use block mode for transferring over one block size of data */
+	func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
+
 	wlan_data = wl12xx_get_platform_data();
 	if (IS_ERR(wlan_data)) {
 		ret = PTR_ERR(wlan_data);
@@ -416,6 +429,7 @@ static int __devinit wl1271_probe(struct sdio_func *func,
 
 	wl->irq = wlan_data->irq;
 	wl->ref_clock = wlan_data->board_ref_clock;
+	wl->tcxo_clock = wlan_data->board_tcxo_clock;
 
 	sdio_set_drvdata(func, wl_test);
 

drivers/net/wireless/wl12xx/spi.c

@@ -355,7 +355,8 @@ static struct wl1271_if_operations spi_ops = {
 	.power		= wl1271_spi_set_power,
 	.dev		= wl1271_spi_wl_to_dev,
 	.enable_irq	= wl1271_spi_enable_interrupts,
-	.disable_irq	= wl1271_spi_disable_interrupts
+	.disable_irq	= wl1271_spi_disable_interrupts,
+	.set_block_size = NULL,
 };
 
 static int __devinit wl1271_probe(struct spi_device *spi)
@@ -363,6 +364,7 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	struct wl12xx_platform_data *pdata;
 	struct ieee80211_hw *hw;
 	struct wl1271 *wl;
+	unsigned long irqflags;
 	int ret;
 
 	pdata = spi->dev.platform_data;
@@ -400,6 +402,13 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	}
 
 	wl->ref_clock = pdata->board_ref_clock;
+	wl->tcxo_clock = pdata->board_tcxo_clock;
+	wl->platform_quirks = pdata->platform_quirks;
+
+	if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ)
+		irqflags = IRQF_TRIGGER_RISING;
+	else
+		irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT;
 
 	wl->irq = spi->irq;
 	if (wl->irq < 0) {
@@ -409,7 +418,7 @@ static int __devinit wl1271_probe(struct spi_device *spi)
 	}
 
 	ret = request_threaded_irq(wl->irq, wl1271_hardirq, wl1271_irq,
-				   IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
+				   irqflags,
 				   DRIVER_NAME, wl);
 	if (ret < 0) {
 		wl1271_error("request_irq() failed: %d", ret);
@@ -490,5 +499,7 @@ MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Luciano Coelho <coelho@ti.com>");
 MODULE_AUTHOR("Juuso Oikarinen <juuso.oikarinen@nokia.com>");
 MODULE_FIRMWARE(WL1271_FW_NAME);
-MODULE_FIRMWARE(WL1271_AP_FW_NAME);
+MODULE_FIRMWARE(WL128X_FW_NAME);
+MODULE_FIRMWARE(WL127X_AP_FW_NAME);
+MODULE_FIRMWARE(WL128X_AP_FW_NAME);
 MODULE_ALIAS("spi:wl1271");

drivers/net/wireless/wl12xx/testmode.c

@@ -27,6 +27,7 @@
 
 #include "wl12xx.h"
 #include "acx.h"
+#include "reg.h"
 
 #define WL1271_TM_MAX_DATA_LENGTH 1024
 
@@ -204,7 +205,10 @@ static int wl1271_tm_cmd_nvs_push(struct wl1271 *wl, struct nlattr *tb[])
 
 	kfree(wl->nvs);
 
-	if (len != sizeof(struct wl1271_nvs_file))
+	if ((wl->chip.id == CHIP_ID_1283_PG20) &&
+	    (len != sizeof(struct wl128x_nvs_file)))
+		return -EINVAL;
+	else if (len != sizeof(struct wl1271_nvs_file))
 		return -EINVAL;
 
 	wl->nvs = kzalloc(len, GFP_KERNEL);

drivers/net/wireless/wl12xx/tx.h

@@ -25,7 +25,6 @@
 #ifndef __TX_H__
 #define __TX_H__
 
-#define TX_HW_BLOCK_SPARE                2
 #define TX_HW_BLOCK_SIZE                 252
 
 #define TX_HW_MGMT_PKT_LIFETIME_TU       2000
@@ -41,6 +40,7 @@
 					  BIT(8) | BIT(9))
 #define TX_HW_ATTR_LAST_WORD_PAD         (BIT(10) | BIT(11))
 #define TX_HW_ATTR_TX_CMPLT_REQ          BIT(12)
+#define TX_HW_ATTR_TX_DUMMY_REQ          BIT(13)
 
 #define TX_HW_ATTR_OFST_SAVE_RETRIES     0
 #define TX_HW_ATTR_OFST_HEADER_PAD       1
@@ -55,20 +55,60 @@
 #define WL1271_TX_ALIGN_TO 4
 #define WL1271_TKIP_IV_SPACE 4
 
+/* Used for management frames and dummy packets */
+#define WL1271_TID_MGMT 7
+
+struct wl127x_tx_mem {
+	/*
+	 * Number of extra memory blocks to allocate for this packet
+	 * in addition to the number of blocks derived from the packet
+	 * length.
+	 */
+	u8 extra_blocks;
+	/*
+	 * Total number of memory blocks allocated by the host for
+	 * this packet. Must be equal or greater than the actual
+	 * blocks number allocated by HW.
+	 */
+	u8 total_mem_blocks;
+} __packed;
+
+struct wl128x_tx_mem {
+	/*
+	 * Total number of memory blocks allocated by the host for
+	 * this packet.
+	 */
+	u8 total_mem_blocks;
+	/*
+	 * Number of extra bytes, at the end of the frame. the host
+	 * uses this padding to complete each frame to integer number
+	 * of SDIO blocks.
+	 */
+	u8 extra_bytes;
+} __packed;
+
+/*
+ * On wl128x based devices, when TX packets are aggregated, each packet
+ * size must be aligned to the SDIO block size. The maximum block size
+ * is bounded by the type of the padded bytes field that is sent to the
+ * FW. Currently the type is u8, so the maximum block size is 256 bytes.
+ */
+#define WL12XX_BUS_BLOCK_SIZE min(512u,	\
+	    (1u << (8 * sizeof(((struct wl128x_tx_mem *) 0)->extra_bytes))))
+
 struct wl1271_tx_hw_descr {
 	/* Length of packet in words, including descriptor+header+data */
 	__le16 length;
-	/* Number of extra memory blocks to allocate for this packet in
-	   addition to the number of blocks derived from the packet length */
-	u8 extra_mem_blocks;
-	/* Total number of memory blocks allocated by the host for this packet.
-	   Must be equal or greater than the actual blocks number allocated by
-	   HW!! */
-	u8 total_mem_blocks;
+	union {
+		struct wl127x_tx_mem wl127x_mem;
+		struct wl128x_tx_mem wl128x_mem;
+	} __packed;
 	/* Device time (in us) when the packet arrived to the driver */
 	__le32 start_time;
-	/* Max delay in TUs until transmission. The last device time the
-	   packet can be transmitted is: startTime+(1024*LifeTime) */
+	/*
+	 * Max delay in TUs until transmission. The last device time the
+	 * packet can be transmitted is: start_time + (1024 * life_time)
+	 */
 	__le16 life_time;
 	/* Bitwise fields - see TX_ATTR... definitions above. */
 	__le16 tx_attr;

drivers/net/wireless/wl12xx/wl12xx.h

@@ -131,9 +131,16 @@ extern u32 wl12xx_debug_level;
 
 
 #define WL1271_FW_NAME "ti-connectivity/wl1271-fw-2.bin"
-#define WL1271_AP_FW_NAME "ti-connectivity/wl1271-fw-ap.bin"
+#define WL128X_FW_NAME "ti-connectivity/wl128x-fw.bin"
+#define WL127X_AP_FW_NAME "ti-connectivity/wl1271-fw-ap.bin"
+#define WL128X_AP_FW_NAME "ti-connectivity/wl128x-fw-ap.bin"
 
-#define WL1271_NVS_NAME "ti-connectivity/wl1271-nvs.bin"
+/*
+ * wl127x and wl128x are using the same NVS file name. However, the
+ * ini parameters between them are different.  The driver validates
+ * the correct NVS size in wl1271_boot_upload_nvs().
+ */
+#define WL12XX_NVS_NAME "ti-connectivity/wl1271-nvs.bin"
 
 #define WL1271_TX_SECURITY_LO16(s) ((u16)((s) & 0xffff))
 #define WL1271_TX_SECURITY_HI32(s) ((u32)(((s) >> 16) & 0xffffffff))
@@ -200,13 +207,29 @@ struct wl1271_partition_set {
 
 struct wl1271;
 
-#define WL12XX_NUM_FW_VER 5
+enum {
+	FW_VER_CHIP,
+	FW_VER_IF_TYPE,
+	FW_VER_MAJOR,
+	FW_VER_SUBTYPE,
+	FW_VER_MINOR,
+
+	NUM_FW_VER
+};
+
+#define FW_VER_CHIP_WL127X 6
+#define FW_VER_CHIP_WL128X 7
+
+#define FW_VER_IF_TYPE_STA 1
+#define FW_VER_IF_TYPE_AP  2
+
+#define FW_VER_MINOR_1_SPARE_STA_MIN 58
+#define FW_VER_MINOR_1_SPARE_AP_MIN  47
 
-/* FIXME: I'm not sure about this structure name */
 struct wl1271_chip {
 	u32 id;
 	char fw_ver_str[ETHTOOL_BUSINFO_LEN];
-	unsigned int fw_ver[WL12XX_NUM_FW_VER];
+	unsigned int fw_ver[NUM_FW_VER];
 };
 
 struct wl1271_stats {
@@ -261,6 +284,8 @@ struct wl1271_fw_sta_status {
 	u8  tx_total;
 	u8  reserved1;
 	__le16 reserved2;
+	/* Total structure size is 68 bytes */
+	u32 padding;
 } __packed;
 
 struct wl1271_fw_full_status {
@@ -277,9 +302,10 @@ struct wl1271_rx_mem_pool_addr {
 	u32 addr_extra;
 };
 
+#define WL1271_MAX_CHANNELS 64
 struct wl1271_scan {
 	struct cfg80211_scan_request *req;
-	bool *scanned_ch;
+	unsigned long scanned_ch[BITS_TO_LONGS(WL1271_MAX_CHANNELS)];
 	bool failed;
 	u8 state;
 	u8 ssid[IW_ESSID_MAX_SIZE+1];
@@ -297,6 +323,7 @@ struct wl1271_if_operations {
 	struct device* (*dev)(struct wl1271 *wl);
 	void (*enable_irq)(struct wl1271 *wl);
 	void (*disable_irq)(struct wl1271 *wl);
+	void (*set_block_size) (struct wl1271 *wl, unsigned int blksz);
 };
 
 #define MAX_NUM_KEYS 14
@@ -327,7 +354,9 @@ enum wl12xx_flags {
 	WL1271_FLAG_PSPOLL_FAILURE,
 	WL1271_FLAG_STA_STATE_SENT,
 	WL1271_FLAG_FW_TX_BUSY,
-	WL1271_FLAG_AP_STARTED
+	WL1271_FLAG_AP_STARTED,
+	WL1271_FLAG_IF_INITIALIZED,
+	WL1271_FLAG_DUMMY_PACKET_PENDING,
 };
 
 struct wl1271_link {
@@ -371,7 +400,7 @@ struct wl1271 {
 	u8 *fw;
 	size_t fw_len;
 	u8 fw_bss_type;
-	struct wl1271_nvs_file *nvs;
+	void *nvs;
 	size_t nvs_len;
 
 	s8 hw_pg_ver;
@@ -389,6 +418,7 @@ struct wl1271 {
 	/* Accounting for allocated / available TX blocks on HW */
 	u32 tx_blocks_freed[NUM_TX_QUEUES];
 	u32 tx_blocks_available;
+	u32 tx_allocated_blocks;
 	u32 tx_results_count;
 
 	/* Transmitted TX packets counter for chipset interface */
@@ -430,6 +460,9 @@ struct wl1271 {
 	/* Intermediate buffer, used for packet aggregation */
 	u8 *aggr_buf;
 
+	/* Reusable dummy packet template */
+	struct sk_buff *dummy_packet;
+
 	/* Network stack work  */
 	struct work_struct netstack_work;
 
@@ -527,6 +560,8 @@ struct wl1271 {
 	bool ba_support;
 	u8 ba_rx_bitmap;
 
+	int tcxo_clock;
+
 	/*
 	 * AP-mode - links indexed by HLID. The global and broadcast links
 	 * are always active.
@@ -544,6 +579,9 @@ struct wl1271 {
 
 	/* Quirks of specific hardware revisions */
 	unsigned int quirks;
+
+	/* Platform limitations */
+	unsigned int platform_quirks;
 };
 
 struct wl1271_station {
@@ -578,4 +616,13 @@ int wl1271_plt_stop(struct wl1271 *wl);
 /* Each RX/TX transaction requires an end-of-transaction transfer */
 #define WL12XX_QUIRK_END_OF_TRANSACTION		BIT(0)
 
+/*
+ * Older firmwares use 2 spare TX blocks
+ * (for STA < 6.1.3.50.58 or for AP < 6.2.0.0.47)
+ */
+#define WL12XX_QUIRK_USE_2_SPARE_BLOCKS		BIT(1)
+
+/* WL128X requires aggregated packets to be aligned to the SDIO block size */
+#define WL12XX_QUIRK_BLOCKSIZE_ALIGNMENT	BIT(2)
+
 #endif

include/linux/wl12xx.h

@@ -24,12 +24,26 @@
 #ifndef _LINUX_WL12XX_H
 #define _LINUX_WL12XX_H
 
-/* The board reference clock values */
+/* Reference clock values */
 enum {
 	WL12XX_REFCLOCK_19	= 0, /* 19.2 MHz */
 	WL12XX_REFCLOCK_26	= 1, /* 26 MHz */
 	WL12XX_REFCLOCK_38	= 2, /* 38.4 MHz */
-	WL12XX_REFCLOCK_54 = 3,	/* 54 MHz */
+	WL12XX_REFCLOCK_52	= 3, /* 52 MHz */
+	WL12XX_REFCLOCK_38_XTAL = 4, /* 38.4 MHz, XTAL */
+	WL12XX_REFCLOCK_26_XTAL = 5, /* 26 MHz, XTAL */
+};
+
+/* TCXO clock values */
+enum {
+	WL12XX_TCXOCLOCK_19_2	= 0, /* 19.2MHz */
+	WL12XX_TCXOCLOCK_26	= 1, /* 26 MHz */
+	WL12XX_TCXOCLOCK_38_4	= 2, /* 38.4MHz */
+	WL12XX_TCXOCLOCK_52	= 3, /* 52 MHz */
+	WL12XX_TCXOCLOCK_16_368	= 4, /* 16.368 MHz */
+	WL12XX_TCXOCLOCK_32_736	= 5, /* 32.736 MHz */
+	WL12XX_TCXOCLOCK_16_8	= 6, /* 16.8 MHz */
+	WL12XX_TCXOCLOCK_33_6	= 7, /* 33.6 MHz */
 };
 
 struct wl12xx_platform_data {
@@ -38,8 +52,13 @@ struct wl12xx_platform_data {
 	int irq;
 	bool use_eeprom;
 	int board_ref_clock;
+	int board_tcxo_clock;
+	unsigned long platform_quirks;
 };
 
+/* Platform does not support level trigger interrupts */
+#define WL12XX_PLATFORM_QUIRK_EDGE_IRQ	BIT(0)
+
 #ifdef CONFIG_WL12XX_PLATFORM_DATA
 
 int wl12xx_set_platform_data(const struct wl12xx_platform_data *data);