PPC32: use the memory size passed in from the bootloader

in preference to probing at startup.

We now use boot_mem_size if it is nonzero and only call
ppc_md.find_end_of_memory if boot_mem_size is zero.

arch/ppc/kernel/setup.c

@@ -66,7 +66,7 @@ unsigned long sysmap_size;
 
 /* Used with the BI_MEMSIZE bootinfo parameter to store the memory
    size value reported by the boot loader. */ 
-unsigned int boot_mem_size;
+unsigned long boot_mem_size;
 
 unsigned long ISA_DMA_THRESHOLD;
 unsigned long DMA_MODE_READ, DMA_MODE_WRITE;

arch/ppc/mm/init.c

@@ -45,6 +45,7 @@
 #include <asm/machdep.h>
 #include <asm/btext.h>
 #include <asm/tlb.h>
+#include <asm/bootinfo.h>
 
 #include "mem_pieces.h"
 #include "mmu_decl.h"
@@ -242,8 +243,13 @@ void __init MMU_init(void)
 
 	/*
 	 * Figure out how much memory we have, how much
-	 * is lowmem, and how much is highmem.
+	 * is lowmem, and how much is highmem.  If we were
+	 * passed the total memory size from the bootloader,
+	 * just use it.
 	 */
+	if (boot_mem_size)
+		total_memory = boot_mem_size;
+	else
 		total_memory = ppc_md.find_end_of_memory();
 
 	if (__max_memory && total_memory > __max_memory)

arch/ppc/platforms/lopec_setup.c

@@ -301,12 +301,6 @@ lopec_progress(char *s, unsigned short hex)
 }
 #endif	/* CONFIG_SERIAL_TEXT_DEBUG */
 
-static unsigned long __init
-lopec_find_end_of_memory(void)
-{
-	return mpc10x_get_mem_size(MPC10X_MEM_MAP_B);
-}
-
 TODC_ALLOC();
 
 static void __init
@@ -376,7 +370,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.power_off = lopec_power_off;
 	ppc_md.halt = lopec_halt;
 
-	ppc_md.find_end_of_memory = lopec_find_end_of_memory;
 	ppc_md.setup_io_mappings = lopec_map_io;
 
 	ppc_md.time_init = todc_time_init;

arch/ppc/platforms/prep_setup.c

@@ -761,37 +761,6 @@ static struct smp_ops_t prep_smp_ops __prepdata = {
 };
 #endif /* CONFIG_SMP */
 
-/*
- * This finds the amount of physical ram and does necessary
- * setup for prep.  This is pretty architecture specific so
- * this will likely stay separate from the pmac.
- * -- Cort
- */
-static unsigned long __init
-prep_find_end_of_memory(void)
-{
-	unsigned long total = 0;
-	extern unsigned int boot_mem_size;
-
-#ifdef CONFIG_PREP_RESIDUAL	
-	total = res->TotalMemory;
-#endif	
-
-	if (total == 0 && boot_mem_size != 0)
-		total = boot_mem_size;
-	else if (total == 0) {
-		/*
-		 * I need a way to probe the amount of memory if the residual
-		 * data doesn't contain it. -- Cort
-		 */
-		total = 0x02000000;
-		printk(KERN_INFO "Ramsize from residual data was 0"
-			 " -- defaulting to %ldM\n", total>>20);
-	}
-
-	return (total);
-}
-
 /*
  * Setup the bat mappings we're going to load that cover
  * the io areas.  RAM was mapped by mapin_ram().
@@ -881,7 +850,6 @@ prep_init(unsigned long r3, unsigned long r4, unsigned long r5,
 		ppc_md.time_init      = mk48t59_init;
 	}
 
-	ppc_md.find_end_of_memory = prep_find_end_of_memory;
 	ppc_md.setup_io_mappings = prep_map_io;
 
 #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)

arch/ppc/platforms/spruce_setup.c

@@ -187,12 +187,6 @@ spruce_halt(void)
 
 extern int boot_mem_size;
 
-static unsigned long __init
-spruce_find_end_of_memory(void)
-{
-	return boot_mem_size;
-}
-
 static void __init
 spruce_map_io(void)
 {
@@ -214,7 +208,6 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.init_IRQ = cpc700_init_IRQ;
 	ppc_md.get_irq = cpc700_get_irq;
 
-	ppc_md.find_end_of_memory = spruce_find_end_of_memory;
 	ppc_md.setup_io_mappings = spruce_map_io;
 
 	ppc_md.restart = spruce_restart;

include/asm-ppc/bootinfo.h

@@ -35,6 +35,7 @@ struct bi_record {
 
 extern struct bi_record *find_bootinfo(void);
 extern void parse_bootinfo(struct bi_record *rec);
+extern unsigned long boot_mem_size;
 
 #endif /* CONFIG_APUS */