Manual merge between -dj and Petr

Documentation/fb/matroxfb.txt

@@ -10,7 +10,7 @@ Advantages:
 
  * It provides a nice large console (128 cols + 48 lines with 1024x768)
    without using tiny, unreadable fonts.
- * You can run XF68_FBDev on top of /dev/fb0
+ * You can run XF{68,86}_FBDev or XFree86 fbdev driver on top of /dev/fb0
  * Most important: boot logo :-)
 
 Disadvantages:
@@ -27,9 +27,6 @@ or using `fbset' program.
 
 If you want, for example, enable a resolution of 1280x1024x24bpp you should
 pass to the kernel this command line: "video=matrox:vesa:0x1BB".
-Note that the same line, if 'appended' as a lilo parameter in lilo.conf will
-read "video=matrox:vesa:443" because lilo pass integer parameters as decimal
-numbers to the kernel.
 
 You should compile in both vgacon (to boot if you remove you Matrox from
 box) and matroxfb (for graphics mode). You should not compile-in vesafb
@@ -82,13 +79,16 @@ example 1600x1200x32bpp can be specified by `video=matrox:vesa:0x11C,depth:32'.
 X11
 ===
 
-XF68_FBDev should work just fine, but it is non-accelerated. On non-intel
+XF{68,86}_FBDev should work just fine, but it is non-accelerated. On non-intel
 architectures there are some glitches for 24bpp videomodes. 8, 16 and 32bpp
 works fine.
 
 Running another (accelerated) X-Server like XF86_SVGA works too. But (at least)
 XFree servers have big troubles in multihead configurations (even on first
-head, not even talking about second).
+head, not even talking about second). Running XFree86 4.x accelerated mga 
+driver is possible, but you must not enable DRI - if you do, resolution and
+color depth of your X desktop must match resolution and color depths of your
+virtual consoles, otherwise X will corrupt accelerator settings.
 
 
 SVGALib

drivers/video/Config.help

@@ -381,8 +381,8 @@ CONFIG_FB_MATROX
   Say Y here if you have a Matrox Millennium, Matrox Millennium II,
   Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
   Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
-  Matrox G400 or G450 card in your box. At this time, support for the
-  G100 is untested and support for G450 is highly experimental.
+  Matrox G400, G450 or G550 card in your box. At this time, support for 
+  the G-series digital output is almost non-existant.
 
   This driver is also available as a module ( = code which can be
   inserted and removed from the running kernel whenever you want).
@@ -408,7 +408,7 @@ CONFIG_FB_MATROX_MYSTIQUE
   different from 8.
 
 CONFIG_FB_MATROX_G100
-  Say Y here if you have a Matrox G100, G200, G400 or G450 based
+  Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
   video card. If you select "Advanced lowlevel driver options", you
   should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
   pixel and 32 bpp packed pixel. You can also use font widths
@@ -418,6 +418,10 @@ CONFIG_FB_MATROX_G100
   "I2C support" and "I2C bit-banging support" in the character devices
   section, and then to "Matrox I2C support" and "G400 second head
   support" here in the framebuffer section.
+  
+  If you have G550, you must also compile support for G450/G550 secondary
+  head into kernel, otherwise picture will be shown only on output you
+  are probably not using...
 
 CONFIG_FB_MATROX_I2C
   This drivers creates I2C buses which are needed for accessing the
@@ -462,7 +466,8 @@ CONFIG_FB_MATROX_MAVEN
 
 CONFIG_FB_MATROX_G450
   Say Y or M here if you want to use a secondary head (meaning two
-  monitors in parallel) on G450.
+  monitors in parallel) on G450, or if you are using analog output
+  of G550.
 
   If you compile it as module, two modules are created,
   matroxfb_crtc2.o and matroxfb_g450.o. Both modules are needed if you

drivers/video/Config.in

@@ -128,7 +128,7 @@ if [ "$CONFIG_FB" = "y" ]; then
 	          dep_tristate '      G400 second head support' CONFIG_FB_MATROX_MAVEN $CONFIG_FB_MATROX_I2C
 	       fi
             fi
-            dep_tristate '      G450/G550 second head support' CONFIG_FB_MATROX_G450 $CONFIG_FB_MATROX_G100
+            dep_tristate '      G450/G550 second head support (mandatory for G550)' CONFIG_FB_MATROX_G450 $CONFIG_FB_MATROX_G100
 	    bool '    Multihead support' CONFIG_FB_MATROX_MULTIHEAD
 	 fi
 	 tristate '  ATI Mach64 display support (EXPERIMENTAL)' CONFIG_FB_ATY

drivers/video/matrox/Makefile

@@ -7,11 +7,13 @@ O_TARGET := matrox.o
 # All of the (potential) objects that export symbols.
 # This list comes from 'grep -l EXPORT_SYMBOL *.[hc]'.
 
-export-objs    :=  matroxfb_base.o matroxfb_accel.o matroxfb_DAC1064.o matroxfb_Ti3026.o matroxfb_misc.o
+export-objs    :=  matroxfb_base.o matroxfb_accel.o matroxfb_DAC1064.o matroxfb_Ti3026.o matroxfb_misc.o g450_pll.o
 
 # Each configuration option enables a list of files.
 
-obj-$(CONFIG_FB_MATROX)           += matroxfb_base.o matroxfb_accel.o matroxfb_DAC1064.o matroxfb_Ti3026.o matroxfb_misc.o
+my-obj-$(CONFIG_FB_MATROX_G100)	  := g450_pll.o
+
+obj-$(CONFIG_FB_MATROX)           += matroxfb_base.o matroxfb_accel.o matroxfb_DAC1064.o matroxfb_Ti3026.o matroxfb_misc.o $(my-obj-y)
 obj-$(CONFIG_FB_MATROX_I2C)       += i2c-matroxfb.o
 obj-$(CONFIG_FB_MATROX_MAVEN)     += matroxfb_maven.o matroxfb_crtc2.o
 obj-$(CONFIG_FB_MATROX_G450)	  += matroxfb_g450.o matroxfb_crtc2.o

drivers/video/matrox/g450_pll.h

+#ifndef __G450_PLL_H__
+#define __G450_PLL_H__
+
+#include "matroxfb_base.h"
+
+int matroxfb_g450_setclk(WPMINFO unsigned int fout, unsigned int pll);
+
+#endif	/* __G450_PLL_H__ */

drivers/video/matrox/matroxfb_DAC1064.h

@@ -13,8 +13,8 @@ extern struct matrox_switch matrox_mystique;
 extern struct matrox_switch matrox_G100;
 #endif
 #ifdef NEED_DAC1064
-void DAC1064_global_init(CPMINFO struct matrox_hw_state*);
-void DAC1064_global_restore(CPMINFO const struct matrox_hw_state*);
+void DAC1064_global_init(WPMINFO2);
+void DAC1064_global_restore(WPMINFO2);
 #endif
 
 #define M1064_INDEX	0x00
@@ -139,10 +139,10 @@ void DAC1064_global_restore(CPMINFO const struct matrox_hw_state*);
 
 #define M1064_XOUTPUTCONN	0x8A
 #define M1064_XSYNCCTRL		0x8B
-#define M1064_XPIXPLL2STAT	0x8C
-#define M1064_XPIXPLL2P		0x8D
-#define M1064_XPIXPLL2N		0x8E
-#define M1064_XPIXPLL2M		0x8F
+#define M1064_XVIDPLLSTAT	0x8C
+#define M1064_XVIDPLLP		0x8D
+#define M1064_XVIDPLLM		0x8E
+#define M1064_XVIDPLLN		0x8F
 
 #define M1064_XPWRCTRL		0xA0
 

drivers/video/matrox/matroxfb_Ti3026.c

@@ -4,7 +4,9 @@
  *
  * (c) 1998,1999,2000 Petr Vandrovec <vandrove@vc.cvut.cz>
  *
- * Version: 1.50 2000/08/10
+ * Portions Copyright (c) 2001 Matrox Graphics Inc.
+ *
+ * Version: 1.62 2000/11/29
  *
  * MTRR stuff: 1998 Tom Rini <trini@kernel.crashing.org>
  *
@@ -357,7 +359,7 @@ static void matroxfb_ti3026_cursor(struct display* p, int mode, int x, int y) {
 			del_timer_sync(&ACCESS_FBINFO(cursor.timer));
 			matroxfb_DAC_lock_irqsave(flags);
 			ACCESS_FBINFO(cursor.state) = CM_ERASE;
-			outTi3026(PMINFO TVP3026_XCURCTRL, ACCESS_FBINFO(currenthw->DACreg[POS3026_XCURCTRL]));
+			outTi3026(PMINFO TVP3026_XCURCTRL, ACCESS_FBINFO(hw.DACreg[POS3026_XCURCTRL]));
 			matroxfb_DAC_unlock_irqrestore(flags);
 		}
 		return;
@@ -377,7 +379,7 @@ static void matroxfb_ti3026_cursor(struct display* p, int mode, int x, int y) {
 		ACCESS_FBINFO(cursor.y) = y;
 		x += 64;
 		y += 64;
-		outTi3026(PMINFO TVP3026_XCURCTRL, ACCESS_FBINFO(currenthw->DACreg[POS3026_XCURCTRL]));
+		outTi3026(PMINFO TVP3026_XCURCTRL, ACCESS_FBINFO(hw.DACreg[POS3026_XCURCTRL]));
 		mga_outb(M_RAMDAC_BASE+TVP3026_CURPOSXL, x);
 		mga_outb(M_RAMDAC_BASE+TVP3026_CURPOSXH, x >> 8);
 		mga_outb(M_RAMDAC_BASE+TVP3026_CURPOSYL, y);
@@ -386,7 +388,7 @@ static void matroxfb_ti3026_cursor(struct display* p, int mode, int x, int y) {
 	ACCESS_FBINFO(cursor.state) = CM_DRAW;
 	if (ACCESS_FBINFO(devflags.blink))
 		mod_timer(&ACCESS_FBINFO(cursor.timer), jiffies + HZ/2);
-	outTi3026(PMINFO TVP3026_XCURCTRL, ACCESS_FBINFO(currenthw->DACreg[POS3026_XCURCTRL]) | TVP3026_XCURCTRL_XGA);
+	outTi3026(PMINFO TVP3026_XCURCTRL, ACCESS_FBINFO(hw.DACreg[POS3026_XCURCTRL]) | TVP3026_XCURCTRL_XGA);
 	matroxfb_DAC_unlock_irqrestore(flags);
 }
 
@@ -418,9 +420,10 @@ static int Ti3026_calcclock(CPMINFO unsigned int freq, unsigned int fmax, int* i
 	return fvco;
 }
 
-static int Ti3026_setpclk(CPMINFO struct matrox_hw_state* hw, int clk, struct display* p) {
+static int Ti3026_setpclk(WPMINFO int clk, struct display* p) {
 	unsigned int f_pll;
 	unsigned int pixfeed, pixin, pixpost;
+	struct matrox_hw_state* hw = &ACCESS_FBINFO(hw);
 
 	DBG("Ti3026_setpclk")
 
@@ -491,8 +494,9 @@ static int Ti3026_setpclk(CPMINFO struct matrox_hw_state* hw, int clk, struct di
 	return 0;
 }
 
-static int Ti3026_init(CPMINFO struct matrox_hw_state* hw, struct my_timming* m, struct display* p) {
+static int Ti3026_init(WPMINFO struct my_timming* m, struct display* p) {
 	u_int8_t muxctrl = isInterleave(MINFO) ? TVP3026_XMUXCTRL_MEMORY_64BIT : TVP3026_XMUXCTRL_MEMORY_32BIT;
+	struct matrox_hw_state* hw = &ACCESS_FBINFO(hw);
 
 	DBG("Ti3026_init")
 
@@ -538,7 +542,7 @@ static int Ti3026_init(CPMINFO struct matrox_hw_state* hw, struct my_timming* m,
 			return 1;	/* TODO: failed */
 		}
 	}
-	if (matroxfb_vgaHWinit(PMINFO hw, m, p)) return 1;
+	if (matroxfb_vgaHWinit(PMINFO m, p)) return 1;
 
 	/* set SYNC */
 	hw->MiscOutReg = 0xCB;
@@ -567,11 +571,11 @@ static int Ti3026_init(CPMINFO struct matrox_hw_state* hw, struct my_timming* m,
 	if ((p->type != FB_TYPE_TEXT) && isInterleave(MINFO)) hw->MXoptionReg |= 0x00001000;
 
 	/* set DAC */
-	Ti3026_setpclk(PMINFO hw, m->pixclock, p);
+	Ti3026_setpclk(PMINFO m->pixclock, p);
 	return 0;
 }
 
-static void ti3026_setMCLK(CPMINFO struct matrox_hw_state* hw, int fout){
+static void ti3026_setMCLK(WPMINFO int fout){
 	unsigned int f_pll;
 	unsigned int pclk_m, pclk_n, pclk_p;
 	unsigned int mclk_m, mclk_n, mclk_p;
@@ -643,8 +647,8 @@ static void ti3026_setMCLK(CPMINFO struct matrox_hw_state* hw, int fout){
 		if (rfhcnt > 15)
 			rfhcnt = 0;
 	}
-	hw->MXoptionReg = (hw->MXoptionReg & ~0x000F0000) | (rfhcnt << 16);
-	pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, hw->MXoptionReg);
+	ACCESS_FBINFO(hw).MXoptionReg = (ACCESS_FBINFO(hw).MXoptionReg & ~0x000F0000) | (rfhcnt << 16);
+	pci_write_config_dword(ACCESS_FBINFO(pcidev), PCI_OPTION_REG, ACCESS_FBINFO(hw).MXoptionReg);
 
 	/* output MCLK to MCLK pin */
 	outTi3026(PMINFO TVP3026_XMEMPLLCTRL, (mclk_ctl & 0xE7) | TVP3026_XMEMPLLCTRL_MCLK_MCLKPLL);
@@ -670,7 +674,7 @@ static void ti3026_setMCLK(CPMINFO struct matrox_hw_state* hw, int fout){
 		printk(KERN_ERR "matroxfb: Pixel PLL not locked after 5 secs\n");
 }
 
-static void ti3026_ramdac_init(WPMINFO struct matrox_hw_state* hw){
+static void ti3026_ramdac_init(WPMINFO2) {
 
 	DBG("ti3026_ramdac_init")
 
@@ -683,11 +687,13 @@ static void ti3026_ramdac_init(WPMINFO struct matrox_hw_state* hw){
 	ACCESS_FBINFO(features.pll.post_shift_max) = 3;
 	if (ACCESS_FBINFO(devflags.noinit))
 		return;
-	ti3026_setMCLK(PMINFO hw, 60000);
+	ti3026_setMCLK(PMINFO 60000);
 }
 
-static void Ti3026_restore(WPMINFO struct matrox_hw_state* hw, struct matrox_hw_state* oldhw, struct display* p) {
+static void Ti3026_restore(WPMINFO struct display* p) {
 	int i;
+	unsigned char progdac[6];
+	struct matrox_hw_state* hw = &ACCESS_FBINFO(hw);
 	CRITFLAGS
 
 	DBG("Ti3026_restore")
@@ -705,7 +711,7 @@ static void Ti3026_restore(WPMINFO struct matrox_hw_state* hw, struct matrox_hw_
 
 	CRITEND
 
-	matroxfb_vgaHWrestore(PMINFO hw, oldhw);
+	matroxfb_vgaHWrestore(PMINFO2);
 
 	CRITBEGIN
 
@@ -715,19 +721,19 @@ static void Ti3026_restore(WPMINFO struct matrox_hw_state* hw, struct matrox_hw_
 	for (i = 0; i < 21; i++) {
 		outTi3026(PMINFO DACseq[i], hw->DACreg[i]);
 	}
-	if (oldhw) {
-		outTi3026(PMINFO TVP3026_XPLLADDR, 0x00);
-		oldhw->DACclk[0] = inTi3026(PMINFO TVP3026_XPIXPLLDATA);
-		oldhw->DACclk[3] = inTi3026(PMINFO TVP3026_XLOOPPLLDATA);
-		outTi3026(PMINFO TVP3026_XPLLADDR, 0x15);
-		oldhw->DACclk[1] = inTi3026(PMINFO TVP3026_XPIXPLLDATA);
-		oldhw->DACclk[4] = inTi3026(PMINFO TVP3026_XLOOPPLLDATA);
-		outTi3026(PMINFO TVP3026_XPLLADDR, 0x2A);
-		oldhw->DACclk[2] = inTi3026(PMINFO TVP3026_XPIXPLLDATA);
-		oldhw->DACclk[5] = inTi3026(PMINFO TVP3026_XLOOPPLLDATA);
-	}
+
+	outTi3026(PMINFO TVP3026_XPLLADDR, 0x00);
+	progdac[0] = inTi3026(PMINFO TVP3026_XPIXPLLDATA);
+	progdac[3] = inTi3026(PMINFO TVP3026_XLOOPPLLDATA);
+	outTi3026(PMINFO TVP3026_XPLLADDR, 0x15);
+	progdac[1] = inTi3026(PMINFO TVP3026_XPIXPLLDATA);
+	progdac[4] = inTi3026(PMINFO TVP3026_XLOOPPLLDATA);
+	outTi3026(PMINFO TVP3026_XPLLADDR, 0x2A);
+	progdac[2] = inTi3026(PMINFO TVP3026_XPIXPLLDATA);
+	progdac[5] = inTi3026(PMINFO TVP3026_XLOOPPLLDATA);
+
 	CRITEND
-	if (!oldhw || memcmp(hw->DACclk, oldhw->DACclk, 6)) {
+	if (memcmp(hw->DACclk, progdac, 6)) {
 		/* agrhh... setting up PLL is very slow on Millennium... */
 		/* Mystique PLL is locked in few ms, but Millennium PLL lock takes about 0.15 s... */
 		/* Maybe even we should call schedule() ? */
@@ -796,22 +802,23 @@ static void Ti3026_restore(WPMINFO struct matrox_hw_state* hw, struct matrox_hw_
 #endif
 }
 
-static void Ti3026_reset(WPMINFO struct matrox_hw_state* hw){
+static void Ti3026_reset(WPMINFO2) {
 
 	DBG("Ti3026_reset")
 
 	matroxfb_fastfont_init(MINFO);
 
-	ti3026_ramdac_init(PMINFO hw);
+	ti3026_ramdac_init(PMINFO2);
 }
 
-static int Ti3026_preinit(WPMINFO struct matrox_hw_state* hw){
+static int Ti3026_preinit(WPMINFO2) {
 	static const int vxres_mill2[] = { 512,        640, 768,  800,  832,  960,
 					  1024, 1152, 1280,      1600, 1664, 1920,
 					  2048, 0};
 	static const int vxres_mill1[] = {             640, 768,  800,        960,
 					  1024, 1152, 1280,      1600,       1920,
 					  2048, 0};
+	struct matrox_hw_state* hw = &ACCESS_FBINFO(hw);
 
 	DBG("Ti3026_preinit")
 

drivers/video/matrox/matroxfb_base.h

@@ -162,7 +162,7 @@
 
 #define CNVT_TOHW(val,width) ((((val)<<(width))+0x7FFF-(val))>>16)
 
-/* G100, G200 and Mystique have (almost) same DAC */
+/* G-series and Mystique have (almost) same DAC */
 #undef NEED_DAC1064
 #if defined(CONFIG_FB_MATROX_MYSTIQUE) || defined(CONFIG_FB_MATROX_G100)
 #define NEED_DAC1064 1
@@ -305,6 +305,21 @@ struct my_timming {
 	unsigned int delay;	/* CRTC delay */
 };
 
+enum { M_SYSTEM_PLL, M_PIXEL_PLL_A, M_PIXEL_PLL_B, M_PIXEL_PLL_C, M_VIDEO_PLL };
+
+struct matrox_pll_cache {
+	unsigned int	valid;
+	struct {
+		unsigned int	mnp_key;
+		unsigned int	mnp_value;
+		      } data[4];
+};
+
+struct matrox_pll_limits {
+	unsigned int	vcomin;
+	unsigned int	vcomax;
+};
+
 struct matrox_pll_features {
 	unsigned int	vco_freq_min;
 	unsigned int	ref_freq;
@@ -371,6 +386,8 @@ struct matrox_hw_state {
 
 	/* CRTC2 only */
 	/* u_int32_t	TBD */
+
+	unsigned int	vidclk;
 };
 
 struct matrox_accel_data {
@@ -382,8 +399,8 @@ struct matrox_accel_data {
 };
 
 struct matrox_altout {
-	int		(*compute)(void* altout_dev, struct my_timming* input, struct matrox_hw_state* state);
-	int		(*program)(void* altout_dev, const struct matrox_hw_state* state);
+	int		(*compute)(void* altout_dev, struct my_timming* input);
+	int		(*program)(void* altout_dev);
 	int		(*start)(void* altout_dev);
 	void		(*incuse)(void* altout_dev);
 	void		(*decuse)(void* altout_dev);
@@ -391,6 +408,20 @@ struct matrox_altout {
 	int		(*getmode)(void* altout_dev, u_int32_t* mode);
 };
 
+enum mga_chip { MGA_2064, MGA_2164, MGA_1064, MGA_1164, MGA_G100, MGA_G200, MGA_G400, MGA_G450, MGA_G550 };
+
+struct matrox_bios {
+	unsigned int	bios_valid : 1;
+	unsigned int	pins_len;
+	unsigned char	pins[128];
+	struct {
+		unsigned char vMaj, vMin, vRev;
+		      } version;
+	struct {
+		unsigned char state, tvout;
+		      } output;
+};
+
 struct matrox_switch;
 struct matroxfb_driver;
 
@@ -404,10 +435,7 @@ struct matrox_fb_info {
 	unsigned int		usecount;
 
 	struct matroxfb_par	curr;
-	struct matrox_hw_state	hw1;
-	struct matrox_hw_state	hw2;
-	struct matrox_hw_state*	newhw;
-	struct matrox_hw_state*	currenthw;
+	struct matrox_hw_state	hw;
 
 	struct matrox_accel_data accel;
 
@@ -464,6 +492,8 @@ struct matrox_fb_info {
 		spinlock_t	accel;
 			      } lock;
 
+	enum mga_chip		chip;
+
 	int			interleave;
 	int			millenium;
 	int			milleniumII;
@@ -514,8 +544,8 @@ struct matrox_fb_info {
 						/* 0 except for 6MB Millenium */
 		int		memtype;
 		int		g450dac;
-		int		g550dac;
 		int		dfp_type;
+		unsigned int	fbResource;
 			      } devflags;
 	struct display_switch	dispsw;
 	struct {
@@ -529,6 +559,38 @@ struct matrox_fb_info {
 		int		redraw;
 		struct timer_list timer;
 			      } cursor;
+	struct matrox_bios	bios;
+	struct {
+		struct matrox_pll_limits	pixel;
+		struct matrox_pll_limits	system;
+		struct matrox_pll_limits	video;
+			      } limits;
+	struct {
+		struct matrox_pll_cache	pixel;
+		struct matrox_pll_cache	system;
+		struct matrox_pll_cache	video;
+				      } cache;
+	struct {
+		struct {
+			unsigned int	video;
+			unsigned int	system;
+				      } pll;
+		struct {
+			u_int32_t	opt;
+			u_int32_t	opt2;
+			u_int32_t	opt3;
+			u_int32_t	mctlwtst;
+			u_int32_t	mctlwtst_core;
+			u_int32_t	memmisc;
+			u_int32_t	memrdbk;
+			u_int32_t	maccess;
+				      } reg;
+		struct {
+			unsigned int	ddr:1,
+			                emrswen:1,
+					dll:1;
+				      } memory;
+			      } values;
 	struct { unsigned red, green, blue, transp; } palette[256];
 #if defined(CONFIG_FB_COMPAT_XPMAC)
 	char	matrox_name[32];
@@ -599,10 +661,10 @@ static inline struct matrox_fb_info* mxinfo(const struct display* p) {
 #endif
 
 struct matrox_switch {
-	int	(*preinit)(WPMINFO struct matrox_hw_state*);
-	void	(*reset)(WPMINFO struct matrox_hw_state*);
-	int	(*init)(CPMINFO struct matrox_hw_state*, struct my_timming*, struct display*);
-	void	(*restore)(WPMINFO struct matrox_hw_state*, struct matrox_hw_state*, struct display*);
+	int	(*preinit)(WPMINFO2);
+	void	(*reset)(WPMINFO2);
+	int	(*init)(WPMINFO struct my_timming*, struct display*);
+	void	(*restore)(WPMINFO struct display*);
 	int	(*selhwcursor)(WPMINFO struct display*);
 };
 
@@ -617,8 +679,13 @@ int matroxfb_register_driver(struct matroxfb_driver* drv);
 void matroxfb_unregister_driver(struct matroxfb_driver* drv);
 
 #define PCI_OPTION_REG	0x40
+#define   PCI_OPTION_ENABLE_ROM		0x40000000
+
 #define PCI_MGA_INDEX	0x44
 #define PCI_MGA_DATA	0x48
+#define PCI_OPTION2_REG	0x50
+#define PCI_OPTION3_REG	0x54
+#define PCI_MEMMISC_REG	0x58
 
 #define M_DWGCTL	0x1C00
 #define M_MACCESS	0x1C04
@@ -737,6 +804,8 @@ void matroxfb_unregister_driver(struct matroxfb_driver* drv);
 #define DAC_XGENIOCTRL		0x2A
 #define DAC_XGENIODATA		0x2B
 
+#define M_C2CTL		0x3E10
+
 #ifdef __LITTLE_ENDIAN
 #define MX_OPTION_BSWAP		0x00000000
 
@@ -794,6 +863,7 @@ extern void matroxfb_DAC_out(CPMINFO int reg, int val);
 extern int matroxfb_DAC_in(CPMINFO int reg);
 extern struct list_head matroxfb_list;
 extern void matroxfb_var2my(struct fb_var_screeninfo* fvsi, struct my_timming* mt);
+extern int matroxfb_switch(int con, struct fb_info *);
 
 #ifdef MATROXFB_USE_SPINLOCKS
 #define CRITBEGIN  spin_lock_irqsave(&ACCESS_FBINFO(lock.accel), critflags);

drivers/video/matrox/matroxfb_crtc2.c

@@ -4,7 +4,9 @@
  *
  * (c) 1998-2001 Petr Vandrovec <vandrove@vc.cvut.cz>
  *
- * Version: 1.52 2001/05/25
+ * Portions Copyright (c) 2001 Matrox Graphics Inc.
+ *
+ * Version: 1.62 2001/11/29
  *
  */
 
@@ -402,43 +404,35 @@ static int matroxfb_dh_set_var(struct fb_var_screeninfo* var, int con,
 		info->changevar(con);
 	if (con == m2info->currcon) {
 		struct my_timming mt;
-		struct matrox_hw_state* hw;
-		struct matrox_hw_state* ohw;
 		unsigned int pos;
 
 		matroxfb_var2my(var, &mt);
 		/* CRTC2 delay */
 		mt.delay = 34;
 
-		hw = ACCESS_FBINFO(newhw);
-		ohw = ACCESS_FBINFO(currenthw);
-
-		/* copy last setting... */
-		memcpy(hw, ohw, sizeof(*hw));
-
 		pos = (var->yoffset * var->xres_virtual + var->xoffset) * var->bits_per_pixel >> 3;
 		pos += m2info->video.offbase;
-		DAC1064_global_init(PMINFO hw);
+		DAC1064_global_init(PMINFO2);
 		if (ACCESS_FBINFO(output.sh) & MATROXFB_OUTPUT_CONN_PRIMARY) {
 			if (ACCESS_FBINFO(primout))
-				ACCESS_FBINFO(primout)->compute(MINFO, &mt, hw);
+				ACCESS_FBINFO(primout)->compute(MINFO, &mt);
 		}
 		if (ACCESS_FBINFO(output.sh) & MATROXFB_OUTPUT_CONN_SECONDARY) {
 			down_read(&ACCESS_FBINFO(altout.lock));
 			if (ACCESS_FBINFO(altout.output))
-				ACCESS_FBINFO(altout.output)->compute(ACCESS_FBINFO(altout.device), &mt, hw);
+				ACCESS_FBINFO(altout.output)->compute(ACCESS_FBINFO(altout.device), &mt);
 			up_read(&ACCESS_FBINFO(altout.lock));
 		}
 		matroxfb_dh_restore(m2info, &mt, p, mode, pos);
-		DAC1064_global_restore(PMINFO hw);
+		DAC1064_global_restore(PMINFO2);
 		if (ACCESS_FBINFO(output.sh) & MATROXFB_OUTPUT_CONN_PRIMARY) {
 			if (ACCESS_FBINFO(primout))
-				ACCESS_FBINFO(primout)->program(MINFO, hw);
+				ACCESS_FBINFO(primout)->program(MINFO);
 		}
 		if (ACCESS_FBINFO(output.sh) & MATROXFB_OUTPUT_CONN_SECONDARY) {
 			down_read(&ACCESS_FBINFO(altout.lock));
 			if (ACCESS_FBINFO(altout.output))
-				ACCESS_FBINFO(altout.output)->program(ACCESS_FBINFO(altout.device), hw);
+				ACCESS_FBINFO(altout.output)->program(ACCESS_FBINFO(altout.device));
 			up_read(&ACCESS_FBINFO(altout.lock));
 		}
 		if (ACCESS_FBINFO(output.sh) & MATROXFB_OUTPUT_CONN_PRIMARY) {
@@ -693,7 +687,7 @@ static int matroxfb_dh_regit(CPMINFO struct matroxfb_dh_fb_info* m2info) {
 
 	strcpy(m2info->fbcon.modename, "MATROX CRTC2");
 	m2info->fbcon.changevar = NULL;
-	m2info->fbcon.node = -1;
+	m2info->fbcon.node = NODEV;
 	m2info->fbcon.fbops = &matroxfb_dh_ops;
 	m2info->fbcon.disp = d;
 	m2info->fbcon.switch_con = &matroxfb_dh_switch;

drivers/video/matrox/matroxfb_g450.c

@@ -4,7 +4,9 @@
  *
  * (c) 1998-2001 Petr Vandrovec <vandrove@vc.cvut.cz>
  *
- * Version: 1.51 2001/01/19
+ * Portions Copyright (c) 2001 Matrox Graphics Inc.
+ *
+ * Version: 1.62 2001/11/29
  *
  * See matroxfb_base.c for contributors.
  *
@@ -13,119 +15,28 @@
 #include "matroxfb_g450.h"
 #include "matroxfb_misc.h"
 #include "matroxfb_DAC1064.h"
+#include "g450_pll.h"
 #include <linux/matroxfb.h>
 #include <asm/uaccess.h>
 
-static int matroxfb_g450_get_reg(WPMINFO int reg) {
-	int val;
-	unsigned long flags;
-
-	matroxfb_DAC_lock_irqsave(flags);
-	val = matroxfb_DAC_in(PMINFO reg);
-	matroxfb_DAC_unlock_irqrestore(flags);
-	return val;
-}
-
-static int matroxfb_g450_set_reg(WPMINFO int reg, int val) {
-	unsigned long flags;
-
-	matroxfb_DAC_lock_irqsave(flags);
-	matroxfb_DAC_out(PMINFO reg, val);
-	matroxfb_DAC_unlock_irqrestore(flags);
-	return 0;
-}
-
-static const struct matrox_pll_features maven_pll = {
-	110000,
-	27000,
-	4, 127,
-	2, 31,
-	3
-};
-
-static const struct matrox_pll_features g550_pll = {
-	135000,
-	27000,
-	4, 127,
-	0, 9,
-	3
-};
-
-static void DAC1064_calcclock(unsigned int freq, unsigned int fmax,
-		unsigned int* in, unsigned int* feed, unsigned int* post,
-		unsigned int timmings) {
-	unsigned int fvco;
-	unsigned int p;
-
-	switch (timmings) {
-		default:
-			fvco = matroxfb_PLL_calcclock(&maven_pll, freq, fmax, in, feed, &p);
-			/* 0 => 100 ... 275 MHz
-		           1 => 243 ... 367 MHz
-		           2 => 320 ... 475 MHz
-		           3 => 453 ... 556 MHz
-		           4 => 540 ... 594 MHz
-		           5 => 588 ... 621 MHz
-		           6 => 626 ... 637 MHz
-		           7 => 631 ... 642 MHz
-
-		           As you can see, never choose frequency > 621 MHz, there is unavailable gap...
-		           Just to be sure, currently driver uses 110 ... 500 MHz range.
-		         */
-			if (fvco <= 260000)
-				;
-			else if (fvco <= 350000)
-				p |= 0x08;
-			else if (fvco <= 460000)
-				p |= 0x10;
-			else if (fvco <= 550000)
-				p |= 0x18;
-			else if (fvco <= 590000)
-				p |= 0x20;
-			else
-				p |= 0x28;
-			break;
-		case 1:
-			fvco = matroxfb_PLL_calcclock(&g550_pll, freq, fmax, in, feed, &p);
-			/* p |= 0x00; */
-			break;
-	}
-	*post = p;
-	return;
-}
-
-static inline int matroxfb_g450_compute_timming(struct matroxfb_g450_info* m2info,
-		struct my_timming* mt,
-		struct mavenregs* m) {
-	unsigned int a, b, c;
-
-	DAC1064_calcclock(mt->pixclock, 300000, &a, &b, &c, m2info->timmings);
-	m->regs[0x80] = a;
-	m->regs[0x81] = b;
-	m->regs[0x82] = c;
-	printk(KERN_DEBUG "PLL: %02X %02X %02X\n", a, b, c);
+static int matroxfb_g450_compute(void* md, struct my_timming* mt) {
+#define m2info ((struct matroxfb_g450_info*)md)
+#define minfo (m2info->primary_dev)
+	ACCESS_FBINFO(hw).vidclk = mt->pixclock;
+#undef minfo
+#undef m2info
 	return 0;
 }
 
-static inline int matroxfb_g450_program_timming(struct matroxfb_g450_info* m2info, const struct mavenregs* m) {
-	MINFO_FROM(m2info->primary_dev);
-
-	matroxfb_g450_set_reg(PMINFO M1064_XPIXPLL2M, m->regs[0x81]);
-	matroxfb_g450_set_reg(PMINFO M1064_XPIXPLL2N, m->regs[0x80]);
-	matroxfb_g450_set_reg(PMINFO M1064_XPIXPLL2P, m->regs[0x82]);
+static int matroxfb_g450_program(void* md) {
+#define m2info ((struct matroxfb_g450_info*)md)
+#define minfo (m2info->primary_dev)
+	matroxfb_g450_setclk(PMINFO ACCESS_FBINFO(hw).vidclk, M_VIDEO_PLL);
+#undef minfo
+#undef m2info	
 	return 0;
 }
 
-/******************************************************/
-
-static int matroxfb_g450_compute(void* md, struct my_timming* mt, struct matrox_hw_state* mr) {
-	return matroxfb_g450_compute_timming(md, mt, &mr->maven);
-}
-
-static int matroxfb_g450_program(void* md, const struct matrox_hw_state* mr) {
-	return matroxfb_g450_program_timming(md, &mr->maven);
-}
-
 static int matroxfb_g450_start(void* md) {
 	return 0;
 }
@@ -191,7 +102,7 @@ static void matroxfb_g450_shutdown(struct matroxfb_g450_info* m2info) {
 static void* matroxfb_g450_probe(struct matrox_fb_info* minfo) {
 	struct matroxfb_g450_info* m2info;
 
-	/* hardware is not G450 incapable... */
+	/* hardware is not G450... */
 	if (!ACCESS_FBINFO(devflags.g450dac))
 		return NULL;
 	m2info = (struct matroxfb_g450_info*)kmalloc(sizeof(*m2info), GFP_KERNEL);
@@ -201,11 +112,6 @@ static void* matroxfb_g450_probe(struct matrox_fb_info* minfo) {
 	}
 	memset(m2info, 0, sizeof(*m2info));
 	m2info->primary_dev = MINFO;
-	if (ACCESS_FBINFO(devflags.g550dac)) {
-		m2info->timmings = 1;
-	} else {
-		m2info->timmings = 0;
-	}
 	if (matroxfb_g450_connect(m2info)) {
 		kfree(m2info);
 		printk(KERN_ERR "matroxfb_g450: G450 DAC failed to initialize\n");

drivers/video/matrox/matroxfb_maven.c

@@ -4,7 +4,9 @@
  *
  * (c) 1998-2001 Petr Vandrovec <vandrove@vc.cvut.cz>
  *
- * Version: 1.51 2001/01/19
+ * Portions Copyright (c) 2001 Matrox Graphics Inc.
+ *
+ * Version: 1.62 2001/11/29
  *
  * See matroxfb_base.c for contributors.
  *
@@ -25,10 +27,14 @@
 #define MODE_TV(x)	(((x) == MODE_PAL) || ((x) == MODE_NTSC))
 #define MODE_MONITOR	MATROXFB_OUTPUT_MODE_MONITOR
 
+#define MGATVO_B	1
+#define MGATVO_C	2
+
 struct maven_data {
 	struct matrox_fb_info*		primary_head;
 	struct i2c_client*		client;
 	int				mode;
+	int				version;
 };
 
 static int maven_get_reg(struct i2c_client* c, char reg) {
@@ -623,8 +629,13 @@ static inline int maven_compute_timming(struct maven_data* md,
 		m->regs[0xA2] = mt->VTotal - mt->VSyncStart - 1;	/* stop vblanking */
 		m->regs[0xA3] = (mt->VTotal - mt->VSyncStart - 1) >> 8;
 		/* something end... [A6]+1..[A8] */
-		m->regs[0xA4] = 0x01;
-		m->regs[0xA5] = 0x00;
+		if (md->version == MGATVO_B) {
+			m->regs[0xA4] = 0x04;
+			m->regs[0xA5] = 0x00;
+		} else {
+			m->regs[0xA4] = 0x01;
+			m->regs[0xA5] = 0x00;
+		}
 		/* something start... 0..[A4]-1 */
 		m->regs[0xA6] = 0x00;
 		m->regs[0xA7] = 0x00;
@@ -862,12 +873,20 @@ static int maven_get_output_mode(struct maven_data* md, u_int32_t *arg) {
 
 /******************************************************/
 
-static int maven_out_compute(void* md, struct my_timming* mt, struct matrox_hw_state* mr) {
-	return maven_compute_timming(md, mt, &mr->maven);
+static int maven_out_compute(void* md, struct my_timming* mt) {
+#define mdinfo ((struct maven_data*)md)
+#define minfo (mdinfo->primary_head)
+	return maven_compute_timming(md, mt, &ACCESS_FBINFO(hw).maven);
+#undef minfo
+#undef mdinfo
 }
 
-static int maven_out_program(void* md, const struct matrox_hw_state* mr) {
-	return maven_program_timming(md, &mr->maven);
+static int maven_out_program(void* md) {
+#define mdinfo ((struct maven_data*)md)
+#define minfo (mdinfo->primary_head)
+	return maven_program_timming(md, &ACCESS_FBINFO(hw).maven);
+#undef minfo
+#undef mdinfo
 }
 
 static int maven_out_start(void* md) {
@@ -916,6 +935,11 @@ static int maven_init_client(struct i2c_client* clnt) {
 	ACCESS_FBINFO(altout.output) = &maven_altout;
 	up_write(&ACCESS_FBINFO(altout.lock));
 	ACCESS_FBINFO(output.all) |= MATROXFB_OUTPUT_CONN_SECONDARY;
+	if (maven_get_reg(clnt, 0xB2) < 0x14) {
+		md->version = MGATVO_B;
+	} else {
+		md->version = MGATVO_C;
+	}
 	return 0;
 }
 

drivers/video/matrox/matroxfb_misc.h

@@ -12,10 +12,11 @@ static inline int PLL_calcclock(CPMINFO unsigned int freq, unsigned int fmax,
 }
 
 void matroxfb_createcursorshape(WPMINFO struct display* p, int vmode);
-int matroxfb_vgaHWinit(CPMINFO struct matrox_hw_state* hw, struct my_timming* m, struct display* p);
-void matroxfb_vgaHWrestore(WPMINFO struct matrox_hw_state* hw, struct matrox_hw_state* oldhw);
+int matroxfb_vgaHWinit(WPMINFO struct my_timming* m, struct display* p);
+void matroxfb_vgaHWrestore(WPMINFO2);
 void matroxfb_fastfont_init(struct matrox_fb_info* minfo);
 int matrox_text_loadfont(WPMINFO struct display* p);
 int matroxfb_fastfont_tryset(WPMINFO struct display* p);
+void matroxfb_read_pins(WPMINFO2);
 
 #endif	/* __MATROXFB_MISC_H__ */