Commit e606a940 authored by Russell King's avatar Russell King

ARM: Realview/Versatile/Integrator: remove unused definitions from platform.h

Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 4ce17552
......@@ -23,9 +23,6 @@
*
* Integrator address map
*
* NOTE: This is a multi-hosted header file for use with uHAL and
* supported debuggers.
*
* ***********************************************************************/
#ifndef __address_h
......@@ -330,20 +327,6 @@
*/
#define PHYS_PCI_V3_BASE 0x62000000
#define PCI_DRAMSIZE INTEGRATOR_SSRAM_SIZE
/* 'export' these to UHAL */
#define UHAL_PCI_IO PCI_IO_BASE
#define UHAL_PCI_MEM PCI_MEM_BASE
#define UHAL_PCI_ALLOC_IO_BASE 0x00004000
#define UHAL_PCI_ALLOC_MEM_BASE PCI_MEM_BASE
#define UHAL_PCI_MAX_SLOT 20
/* ========================================================================
* Start of uHAL definitions
* ========================================================================
*/
/* ------------------------------------------------------------------------
* Integrator Interrupt Controllers
* ------------------------------------------------------------------------
......@@ -391,7 +374,7 @@
*/
/* ------------------------------------------------------------------------
* LED's - The header LED is not accessible via the uHAL API
* LED's
* ------------------------------------------------------------------------
*
*/
......@@ -403,35 +386,19 @@
#define LED_BANK INTEGRATOR_DBG_LEDS
/*
* Memory definitions - run uHAL out of SSRAM.
*
*/
#define uHAL_MEMORY_SIZE INTEGRATOR_SSRAM_SIZE
/*
* Clean base - dummy
*
*/
#define CLEAN_BASE INTEGRATOR_BOOT_ROM_HI
/*
* Timer definitions
*
* Only use timer 1 & 2
* (both run at 24MHz and will need the clock divider set to 16).
*
* Timer 0 runs at bus frequency and therefore could vary and currently
* uHAL can't handle that.
*
* Timer 0 runs at bus frequency
*/
#define INTEGRATOR_TIMER0_BASE INTEGRATOR_CT_BASE
#define INTEGRATOR_TIMER1_BASE (INTEGRATOR_CT_BASE + 0x100)
#define INTEGRATOR_TIMER2_BASE (INTEGRATOR_CT_BASE + 0x200)
#define MAX_TIMER 2
#define MAX_PERIOD 699050
#define TICKS_PER_uSEC 24
/*
......@@ -439,14 +406,9 @@
*
*/
#define mSEC_1 1000
#define mSEC_5 (mSEC_1 * 5)
#define mSEC_10 (mSEC_1 * 10)
#define mSEC_25 (mSEC_1 * 25)
#define SEC_1 (mSEC_1 * 1000)
#define INTEGRATOR_CSR_BASE 0x10000000
#define INTEGRATOR_CSR_SIZE 0x10000000
#endif
/* END */
......@@ -231,12 +231,6 @@
#define REALVIEW_INTREG_OFFSET 0x8 /* Interrupt control */
#define REALVIEW_DECODE_OFFSET 0xC /* Fitted logic modules */
/*
* Clean base - dummy
*
*/
#define CLEAN_BASE REALVIEW_BOOT_ROM_HI
/*
* System controller bit assignment
*/
......@@ -249,20 +243,6 @@
#define REALVIEW_TIMER4_EnSel 21
#define MAX_TIMER 2
#define MAX_PERIOD 699050
#define TICKS_PER_uSEC 1
/*
* These are useconds NOT ticks.
*
*/
#define mSEC_1 1000
#define mSEC_5 (mSEC_1 * 5)
#define mSEC_10 (mSEC_1 * 10)
#define mSEC_25 (mSEC_1 * 25)
#define SEC_1 (mSEC_1 * 1000)
#define REALVIEW_CSR_BASE 0x10000000
#define REALVIEW_CSR_SIZE 0x10000000
......
......@@ -379,12 +379,6 @@
#define SIC_INT_PCI3 30
/*
* Clean base - dummy
*
*/
#define CLEAN_BASE VERSATILE_BOOT_ROM_HI
/*
* System controller bit assignment
*/
......@@ -397,20 +391,6 @@
#define VERSATILE_TIMER4_EnSel 21
#define MAX_TIMER 2
#define MAX_PERIOD 699050
#define TICKS_PER_uSEC 1
/*
* These are useconds NOT ticks.
*
*/
#define mSEC_1 1000
#define mSEC_5 (mSEC_1 * 5)
#define mSEC_10 (mSEC_1 * 10)
#define mSEC_25 (mSEC_1 * 25)
#define SEC_1 (mSEC_1 * 1000)
#define VERSATILE_CSR_BASE 0x10000000
#define VERSATILE_CSR_SIZE 0x10000000
......@@ -432,5 +412,3 @@
#endif
#endif
/* END */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment