Skip to content

L
linux
Commit e7890297 authored by Guennadi Liakhovetski's avatar Guennadi Liakhovetski Committed by Wolfram Sang
Browse files
Options

i2c: sh_mobile: don't send a stop condition by default inside transfers 

By default there should be no stop bit on I2C between single messages
within transfers. Fix the driver to comply and only send a stop bit at
the end of transfers or if I2C_M_STOP is set.
Signed-off-by: default avatarGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: default avatarWolfram Sang <wolfram@the-dreams.de>
parent 4b382318
Show whitespace changes
Inline Side-by-side
Showing with 59 additions and 20 deletions
drivers/i2c/busses/i2c-sh_mobile.c
View file @ e7890297
...@@ -38,21 +38,21 @@ ...@@ -38,21 +38,21 @@
/* Transmit operation: */ /* Transmit operation: */
/* */ /* */
/* 0 byte transmit */ /* 0 byte transmit */
/* BUS: S A8 ACK P */ /* BUS: S A8 ACK P(*) */
/* IRQ: DTE WAIT */ /* IRQ: DTE WAIT */
/* ICIC: */ /* ICIC: */
/* ICCR: 0x94 0x90 */ /* ICCR: 0x94 0x90 */
/* ICDR: A8 */ /* ICDR: A8 */
/* */ /* */
/* 1 byte transmit */ /* 1 byte transmit */
/* BUS: S A8 ACK D8(1) ACK P */ /* BUS: S A8 ACK D8(1) ACK P(*) */
/* IRQ: DTE WAIT WAIT */ /* IRQ: DTE WAIT WAIT */
/* ICIC: -DTE */ /* ICIC: -DTE */
/* ICCR: 0x94 0x90 */ /* ICCR: 0x94 0x90 */
/* ICDR: A8 D8(1) */ /* ICDR: A8 D8(1) */
/* */ /* */
/* 2 byte transmit */ /* 2 byte transmit */
/* BUS: S A8 ACK D8(1) ACK D8(2) ACK P */ /* BUS: S A8 ACK D8(1) ACK D8(2) ACK P(*) */
/* IRQ: DTE WAIT WAIT WAIT */ /* IRQ: DTE WAIT WAIT WAIT */
/* ICIC: -DTE */ /* ICIC: -DTE */
/* ICCR: 0x94 0x90 */ /* ICCR: 0x94 0x90 */
...@@ -66,20 +66,20 @@ ...@@ -66,20 +66,20 @@
/* 0 byte receive - not supported since slave may hold SDA low */ /* 0 byte receive - not supported since slave may hold SDA low */
/* */ /* */
/* 1 byte receive [TX] | [RX] */ /* 1 byte receive [TX] | [RX] */
/* BUS: S A8 ACK | D8(1) ACK P */ /* BUS: S A8 ACK | D8(1) ACK P(*) */
/* IRQ: DTE WAIT | WAIT DTE */ /* IRQ: DTE WAIT | WAIT DTE */
/* ICIC: -DTE | +DTE */ /* ICIC: -DTE | +DTE */
/* ICCR: 0x94 0x81 | 0xc0 */ /* ICCR: 0x94 0x81 | 0xc0 */
/* ICDR: A8 | D8(1) */ /* ICDR: A8 | D8(1) */
/* */ /* */
/* 2 byte receive [TX]| [RX] */ /* 2 byte receive [TX]| [RX] */
/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P */ /* BUS: S A8 ACK | D8(1) ACK D8(2) ACK P(*) */
/* IRQ: DTE WAIT | WAIT WAIT DTE */ /* IRQ: DTE WAIT | WAIT WAIT DTE */
/* ICIC: -DTE | +DTE */ /* ICIC: -DTE | +DTE */
/* ICCR: 0x94 0x81 | 0xc0 */ /* ICCR: 0x94 0x81 | 0xc0 */
/* ICDR: A8 | D8(1) D8(2) */ /* ICDR: A8 | D8(1) D8(2) */
/* */ /* */
/* 3 byte receive [TX] | [RX] */ /* 3 byte receive [TX] | [RX] (*) */
/* BUS: S A8 ACK | D8(1) ACK D8(2) ACK D8(3) ACK P */ /* BUS: S A8 ACK | D8(1) ACK D8(2) ACK D8(3) ACK P */
/* IRQ: DTE WAIT | WAIT WAIT WAIT DTE */ /* IRQ: DTE WAIT | WAIT WAIT WAIT DTE */
/* ICIC: -DTE | +DTE */ /* ICIC: -DTE | +DTE */
...@@ -94,7 +94,7 @@ ...@@ -94,7 +94,7 @@
/* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/ */ /* SDA ___\___XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXAAAAAAAAA___/ */
/* SCL \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/ */ /* SCL \_/1\_/2\_/3\_/4\_/5\_/6\_/7\_/8\___/9\_____/ */
/* */ /* */
/* S D7 D6 D5 D4 D3 D2 D1 D0 P */ /* S D7 D6 D5 D4 D3 D2 D1 D0 P(*) */
/* ___ */ /* ___ */
/* WAIT IRQ ________________________________/ \___________ */ /* WAIT IRQ ________________________________/ \___________ */
/* TACK IRQ ____________________________________/ \_______ */ /* TACK IRQ ____________________________________/ \_______ */
...@@ -103,6 +103,11 @@ ...@@ -103,6 +103,11 @@
/* _______________________________________________ */ /* _______________________________________________ */
/* BUSY __/ \_ */ /* BUSY __/ \_ */
/* */ /* */
/* (*) The STOP condition is only sent by the master at the end of the last */
/* I2C message or if the I2C_M_STOP flag is set. Similarly, the BUSY bit is */
/* only cleared after the STOP condition, so, between messages we have to */
/* poll for the DTE bit. */
/* */
enum sh_mobile_i2c_op { enum sh_mobile_i2c_op {
OP_START = 0, OP_START = 0,
...@@ -132,6 +137,7 @@ struct sh_mobile_i2c_data { ...@@ -132,6 +137,7 @@ struct sh_mobile_i2c_data {
struct i2c_msg *msg; struct i2c_msg *msg;
int pos; int pos;
int sr; int sr;
bool send_stop;
}; };
#define IIC_FLAG_HAS_ICIC67 (1 << 0) #define IIC_FLAG_HAS_ICIC67 (1 << 0)
...@@ -322,7 +328,7 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd, ...@@ -322,7 +328,7 @@ static unsigned char i2c_op(struct sh_mobile_i2c_data *pd,
break; break;
case OP_TX_STOP: /* write data and issue a stop afterwards */ case OP_TX_STOP: /* write data and issue a stop afterwards */
iic_wr(pd, ICDR, data); iic_wr(pd, ICDR, data);
iic_wr(pd, ICCR, 0x90); iic_wr(pd, ICCR, pd->send_stop ? 0x90 : 0x94);
break; break;
case OP_TX_TO_RX: /* select read mode */ case OP_TX_TO_RX: /* select read mode */
iic_wr(pd, ICCR, 0x81); iic_wr(pd, ICCR, 0x81);
...@@ -469,13 +475,15 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id) ...@@ -469,13 +475,15 @@ static irqreturn_t sh_mobile_i2c_isr(int irq, void *dev_id)
return IRQ_HANDLED; return IRQ_HANDLED;
} }
static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg) static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg,
bool do_init)
{ {
if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) { if (usr_msg->len == 0 && (usr_msg->flags & I2C_M_RD)) {
dev_err(pd->dev, "Unsupported zero length i2c read\n"); dev_err(pd->dev, "Unsupported zero length i2c read\n");
return -EIO; return -EIO;
} }
if (do_init) {
/* Initialize channel registers */ /* Initialize channel registers */
iic_set_clr(pd, ICCR, 0, ICCR_ICE); iic_set_clr(pd, ICCR, 0, ICCR_ICE);
...@@ -485,6 +493,7 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg) ...@@ -485,6 +493,7 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
/* Set the clock */ /* Set the clock */
iic_wr(pd, ICCL, pd->iccl & 0xff); iic_wr(pd, ICCL, pd->iccl & 0xff);
iic_wr(pd, ICCH, pd->icch & 0xff); iic_wr(pd, ICCH, pd->icch & 0xff);
}
pd->msg = usr_msg; pd->msg = usr_msg;
pd->pos = -1; pd->pos = -1;
...@@ -495,6 +504,30 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg) ...@@ -495,6 +504,30 @@ static int start_ch(struct sh_mobile_i2c_data *pd, struct i2c_msg *usr_msg)
return 0; return 0;
} }
static int poll_dte(struct sh_mobile_i2c_data *pd)
{
int i;
for (i = 1000; i; i--) {
u_int8_t val = iic_rd(pd, ICSR);
if (val & ICSR_DTE)
break;
if (val & ICSR_TACK)
return -EIO;
udelay(10);
}
if (!i) {
dev_warn(pd->dev, "Timeout polling for DTE!\n");
return -ETIMEDOUT;
}
return 0;
}
static int poll_busy(struct sh_mobile_i2c_data *pd) static int poll_busy(struct sh_mobile_i2c_data *pd)
{ {
int i; int i;
...@@ -539,12 +572,15 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter, ...@@ -539,12 +572,15 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
/* Process all messages */ /* Process all messages */
for (i = 0; i < num; i++) { for (i = 0; i < num; i++) {
bool do_start = pd->send_stop || !i;
msg = &msgs[i]; msg = &msgs[i];
pd->send_stop = i == num - 1 || msg->flags & I2C_M_STOP;
err = start_ch(pd, msg); err = start_ch(pd, msg, do_start);
if (err) if (err)
break; break;
if (do_start)
i2c_op(pd, OP_START, 0); i2c_op(pd, OP_START, 0);
/* The interrupt handler takes care of the rest... */ /* The interrupt handler takes care of the rest... */
...@@ -557,7 +593,10 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter, ...@@ -557,7 +593,10 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
break; break;
} }
if (pd->send_stop)
err = poll_busy(pd); err = poll_busy(pd);
else
err = poll_dte(pd);
if (err < 0) if (err < 0)
break; break;
} }
...@@ -571,7 +610,7 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter, ...@@ -571,7 +610,7 @@ static int sh_mobile_i2c_xfer(struct i2c_adapter *adapter,
static u32 sh_mobile_i2c_func(struct i2c_adapter *adapter) static u32 sh_mobile_i2c_func(struct i2c_adapter *adapter)
{ {
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING;
} }
static struct i2c_algorithm sh_mobile_i2c_algorithm = { static struct i2c_algorithm sh_mobile_i2c_algorithm = {
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7