Skip to content

L
linux
Commit e7e69265 authored by Sudip Mukherjee's avatar Sudip Mukherjee Committed by Takashi Iwai
Browse files
Options

sound: pci: au88x0: printk replacement 

as pr_* macros are more preffered over printk, so printk replaced
with corresponding pr_* macros.
this patch will generate warning from checkpatch as it only did printk
replacement and didnot fixed other style issues.
Signed-off-by: default avatarSudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 848f3a82
Expand all Show whitespace changes
Inline Side-by-side
Showing with 74 additions and 74 deletions
sound/pci/au88x0/au88x0.c
View file @ e7e69265
......@@ -48,10 +48,10 @@ static void vortex_fix_latency(struct pci_dev *vortex)
{
int rc;
if (!(rc = pci_write_config_byte(vortex, 0x40, 0xff))) {
printk(KERN_INFO CARD_NAME
pr_info( CARD_NAME
": vortex latency is 0xff\n");
} else {
printk(KERN_WARNING CARD_NAME
pr_warn( CARD_NAME
": could not set vortex latency: pci error 0x%x\n", rc);
}
}
......@@ -70,10 +70,10 @@ static void vortex_fix_agp_bridge(struct pci_dev *via)
if (!(rc = pci_read_config_byte(via, 0x42, &value))
&& ((value & 0x10)
|| !(rc = pci_write_config_byte(via, 0x42, value | 0x10)))) {
printk(KERN_INFO CARD_NAME
pr_info( CARD_NAME
": bridge config is 0x%x\n", value | 0x10);
} else {
printk(KERN_WARNING CARD_NAME
pr_warn( CARD_NAME
": could not set vortex latency: pci error 0x%x\n", rc);
}
}
......@@ -97,7 +97,7 @@ static void snd_vortex_workaround(struct pci_dev *vortex, int fix)
PCI_DEVICE_ID_AMD_FE_GATE_7007, NULL);
}
if (via) {
printk(KERN_INFO CARD_NAME ": Activating latency workaround...\n");
pr_info( CARD_NAME ": Activating latency workaround...\n");
vortex_fix_latency(vortex);
vortex_fix_agp_bridge(via);
}
......@@ -153,7 +153,7 @@ snd_vortex_create(struct snd_card *card, struct pci_dev *pci, vortex_t ** rchip)
return err;
if (pci_set_dma_mask(pci, DMA_BIT_MASK(32)) < 0 ||
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32)) < 0) {
printk(KERN_ERR "error to set DMA mask\n");
pr_err( "error to set DMA mask\n");
pci_disable_device(pci);
return -ENXIO;
}
......@@ -182,7 +182,7 @@ snd_vortex_create(struct snd_card *card, struct pci_dev *pci, vortex_t ** rchip)
chip->mmio = pci_ioremap_bar(pci, 0);
if (!chip->mmio) {
printk(KERN_ERR "MMIO area remap failed.\n");
pr_err( "MMIO area remap failed.\n");
err = -ENOMEM;
goto ioremap_out;
}
......@@ -191,14 +191,14 @@ snd_vortex_create(struct snd_card *card, struct pci_dev *pci, vortex_t ** rchip)
* This must be done before we do request_irq otherwise we can get spurious
* interrupts that we do not handle properly and make a mess of things */
if ((err = vortex_core_init(chip)) != 0) {
printk(KERN_ERR "hw core init failed\n");
pr_err( "hw core init failed\n");
goto core_out;
}
if ((err = request_irq(pci->irq, vortex_interrupt,
IRQF_SHARED, KBUILD_MODNAME,
chip)) != 0) {
printk(KERN_ERR "cannot grab irq\n");
pr_err( "cannot grab irq\n");
goto irq_out;
}
chip->irq = pci->irq;
......@@ -342,10 +342,10 @@ snd_vortex_probe(struct pci_dev *pci, const struct pci_device_id *pci_id)
chip->rev = pci->revision;
#ifdef CHIP_AU8830
if ((chip->rev) != 0xfe && (chip->rev) != 0xfa) {
printk(KERN_ALERT
pr_alert(
"vortex: The revision (%x) of your card has not been seen before.\n",
chip->rev);
printk(KERN_ALERT
pr_alert(
"vortex: Please email the results of 'lspci -vv' to openvortex-dev@nongnu.org.\n");
snd_card_free(card);
err = -ENODEV;
......
sound/pci/au88x0/au88x0_a3d.c
View file @ e7e69265
......@@ -463,7 +463,7 @@ static void a3dsrc_ZeroSliceIO(a3dsrc_t * a)
static void a3dsrc_ZeroState(a3dsrc_t * a)
{
/*
printk(KERN_DEBUG "vortex: ZeroState slice: %d, source %d\n",
pr_debug( "vortex: ZeroState slice: %d, source %d\n",
a->slice, a->source);
*/
a3dsrc_SetAtmosState(a, 0, 0, 0, 0);
......@@ -489,7 +489,7 @@ static void a3dsrc_ZeroStateA3D(a3dsrc_t * a)
int i, var, var2;
if ((a->vortex) == NULL) {
printk(KERN_ERR "vortex: ZeroStateA3D: ERROR: a->vortex is NULL\n");
pr_err( "vortex: ZeroStateA3D: ERROR: a->vortex is NULL\n");
return;
}
......@@ -628,14 +628,14 @@ static void vortex_Vort3D_connect(vortex_t * v, int en)
v->mixxtlk[0] =
vortex_adb_checkinout(v, v->fixed_res, en, VORTEX_RESOURCE_MIXIN);
if (v->mixxtlk[0] < 0) {
printk
pr_warn
("vortex: vortex_Vort3D: ERROR: not enough free mixer resources.\n");
return;
}
v->mixxtlk[1] =
vortex_adb_checkinout(v, v->fixed_res, en, VORTEX_RESOURCE_MIXIN);
if (v->mixxtlk[1] < 0) {
printk
pr_warn
("vortex: vortex_Vort3D: ERROR: not enough free mixer resources.\n");
return;
}
......@@ -679,7 +679,7 @@ static void vortex_Vort3D_connect(vortex_t * v, int en)
static void vortex_Vort3D_InitializeSource(a3dsrc_t * a, int en)
{
if (a->vortex == NULL) {
printk
pr_warn
("vortex: Vort3D_InitializeSource: A3D source not initialized\n");
return;
}
......
sound/pci/au88x0/au88x0_core.c
View file @ e7e69265
This diff is collapsed.
sound/pci/au88x0/au88x0_eq.c
View file @ e7e69265
......@@ -845,7 +845,7 @@ snd_vortex_peaks_get(struct snd_kcontrol *kcontrol, struct snd_ctl_elem_value *u
vortex_Eqlzr_GetAllPeaks(vortex, peaks, &count);
if (count != 20) {
printk(KERN_ERR "vortex: peak count error 20 != %d \n", count);
pr_err( "vortex: peak count error 20 != %d \n", count);
return -1;
}
for (i = 0; i < 20; i++)
......
sound/pci/au88x0/au88x0_game.c
View file @ e7e69265
......@@ -98,7 +98,7 @@ static int vortex_gameport_register(vortex_t *vortex)
vortex->gameport = gp = gameport_allocate_port();
if (!gp) {
printk(KERN_ERR "vortex: cannot allocate memory for gameport\n");
pr_err( "vortex: cannot allocate memory for gameport\n");
return -ENOMEM;
}
......
sound/pci/au88x0/au88x0_mpu401.c
View file @ e7e69265
......@@ -73,7 +73,7 @@ static int snd_vortex_midi(vortex_t *vortex)
/* Check if anything is OK. */
temp = hwread(vortex->mmio, VORTEX_MIDI_DATA);
if (temp != MPU401_ACK /*0xfe */ ) {
printk(KERN_ERR "midi port doesn't acknowledge!\n");
pr_err( "midi port doesn't acknowledge!\n");
return -ENODEV;
}
/* Enable MPU401 interrupts. */
......
sound/pci/au88x0/au88x0_pcm.c
View file @ e7e69265
......@@ -227,11 +227,11 @@ snd_vortex_pcm_hw_params(struct snd_pcm_substream *substream,
err =
snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(hw_params));
if (err < 0) {
printk(KERN_ERR "Vortex: pcm page alloc failed!\n");
pr_err( "Vortex: pcm page alloc failed!\n");
return err;
}
/*
printk(KERN_INFO "Vortex: periods %d, period_bytes %d, channels = %d\n", params_periods(hw_params),
pr_info( "Vortex: periods %d, period_bytes %d, channels = %d\n", params_periods(hw_params),
params_period_bytes(hw_params), params_channels(hw_params));
*/
spin_lock_irq(&chip->lock);
......@@ -371,7 +371,7 @@ static int snd_vortex_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
}
#ifndef CHIP_AU8810
else {
printk(KERN_INFO "vortex: wt start %d\n", dma);
pr_info( "vortex: wt start %d\n", dma);
vortex_wtdma_startfifo(chip, dma);
}
#endif
......@@ -384,7 +384,7 @@ static int snd_vortex_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
vortex_adbdma_stopfifo(chip, dma);
#ifndef CHIP_AU8810
else {
printk(KERN_INFO "vortex: wt stop %d\n", dma);
pr_info( "vortex: wt stop %d\n", dma);
vortex_wtdma_stopfifo(chip, dma);
}
#endif
......
sound/pci/au88x0/au88x0_synth.c
View file @ e7e69265
......@@ -90,7 +90,7 @@ static int vortex_wt_allocroute(vortex_t * vortex, int wt, int nr_ch)
hwwrite(vortex->mmio, WT_PARM(wt, 2), 0);
temp = hwread(vortex->mmio, WT_PARM(wt, 3));
printk(KERN_DEBUG "vortex: WT PARM3: %x\n", temp);
pr_debug( "vortex: WT PARM3: %x\n", temp);
//hwwrite(vortex->mmio, WT_PARM(wt, 3), temp);
hwwrite(vortex->mmio, WT_DELAY(wt, 0), 0);
......@@ -98,7 +98,7 @@ static int vortex_wt_allocroute(vortex_t * vortex, int wt, int nr_ch)
hwwrite(vortex->mmio, WT_DELAY(wt, 2), 0);
hwwrite(vortex->mmio, WT_DELAY(wt, 3), 0);
printk(KERN_DEBUG "vortex: WT GMODE: %x\n", hwread(vortex->mmio, WT_GMODE(wt)));
pr_debug( "vortex: WT GMODE: %x\n", hwread(vortex->mmio, WT_GMODE(wt)));
hwwrite(vortex->mmio, WT_PARM(wt, 2), 0xffffffff);
hwwrite(vortex->mmio, WT_PARM(wt, 3), 0xcff1c810);
......@@ -106,7 +106,7 @@ static int vortex_wt_allocroute(vortex_t * vortex, int wt, int nr_ch)
voice->parm0 = voice->parm1 = 0xcfb23e2f;
hwwrite(vortex->mmio, WT_PARM(wt, 0), voice->parm0);
hwwrite(vortex->mmio, WT_PARM(wt, 1), voice->parm1);
printk(KERN_DEBUG "vortex: WT GMODE 2 : %x\n", hwread(vortex->mmio, WT_GMODE(wt)));
pr_debug( "vortex: WT GMODE 2 : %x\n", hwread(vortex->mmio, WT_GMODE(wt)));
return 0;
}
......@@ -196,14 +196,14 @@ vortex_wt_SetReg(vortex_t * vortex, unsigned char reg, int wt,
if ((reg == 5) || ((reg >= 7) && (reg <= 10)) || (reg == 0xc)) {
if (wt >= (NR_WT / NR_WT_PB)) {
printk
pr_warn
("vortex: WT SetReg: bank out of range. reg=0x%x, wt=%d\n",
reg, wt);
return 0;
}
} else {
if (wt >= NR_WT) {
printk(KERN_ERR "vortex: WT SetReg: voice out of range\n");
pr_err( "vortex: WT SetReg: voice out of range\n");
return 0;
}
}
......@@ -214,42 +214,42 @@ vortex_wt_SetReg(vortex_t * vortex, unsigned char reg, int wt,
/* Voice specific parameters */
case 0: /* running */
/*
printk(KERN_DEBUG "vortex: WT SetReg(0x%x) = 0x%08x\n",
pr_debug( "vortex: WT SetReg(0x%x) = 0x%08x\n",
WT_RUN(wt), (int)val);
*/
hwwrite(vortex->mmio, WT_RUN(wt), val);
return 0xc;
case 1: /* param 0 */
/*
printk(KERN_DEBUG "vortex: WT SetReg(0x%x) = 0x%08x\n",
pr_debug( "vortex: WT SetReg(0x%x) = 0x%08x\n",
WT_PARM(wt,0), (int)val);
*/
hwwrite(vortex->mmio, WT_PARM(wt, 0), val);
return 0xc;
case 2: /* param 1 */
/*
printk(KERN_DEBUG "vortex: WT SetReg(0x%x) = 0x%08x\n",
pr_debug( "vortex: WT SetReg(0x%x) = 0x%08x\n",
WT_PARM(wt,1), (int)val);
*/
hwwrite(vortex->mmio, WT_PARM(wt, 1), val);
return 0xc;
case 3: /* param 2 */
/*
printk(KERN_DEBUG "vortex: WT SetReg(0x%x) = 0x%08x\n",
pr_debug( "vortex: WT SetReg(0x%x) = 0x%08x\n",
WT_PARM(wt,2), (int)val);
*/
hwwrite(vortex->mmio, WT_PARM(wt, 2), val);
return 0xc;
case 4: /* param 3 */
/*
printk(KERN_DEBUG "vortex: WT SetReg(0x%x) = 0x%08x\n",
pr_debug( "vortex: WT SetReg(0x%x) = 0x%08x\n",
WT_PARM(wt,3), (int)val);
*/
hwwrite(vortex->mmio, WT_PARM(wt, 3), val);
return 0xc;
case 6: /* mute */
/*
printk(KERN_DEBUG "vortex: WT SetReg(0x%x) = 0x%08x\n",
pr_debug( "vortex: WT SetReg(0x%x) = 0x%08x\n",
WT_MUTE(wt), (int)val);
*/
hwwrite(vortex->mmio, WT_MUTE(wt), val);
......@@ -257,7 +257,7 @@ vortex_wt_SetReg(vortex_t * vortex, unsigned char reg, int wt,
case 0xb:
/* delay */
/*
printk(KERN_DEBUG "vortex: WT SetReg(0x%x) = 0x%08x\n",
pr_debug( "vortex: WT SetReg(0x%x) = 0x%08x\n",
WT_DELAY(wt,0), (int)val);
*/
hwwrite(vortex->mmio, WT_DELAY(wt, 3), val);
......@@ -285,7 +285,7 @@ vortex_wt_SetReg(vortex_t * vortex, unsigned char reg, int wt,
return 0;
}
/*
printk(KERN_DEBUG "vortex: WT SetReg(0x%x) = 0x%08x\n", ecx, (int)val);
pr_debug( "vortex: WT SetReg(0x%x) = 0x%08x\n", ecx, (int)val);
*/
hwwrite(vortex->mmio, ecx, val);
return 1;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7