Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "New SoC specific drivers:

   - NVIDIA Tegra PM Domain support for newer SoCs (Tegra186 and later)
     based on the "BPMP" firmware

   - Clocksource and system controller drivers for the newly added
     Action Semi platforms (both arm and arm64).

  Reset subsystem, merged through arm-soc by tradition:

   - New drivers for Altera Stratix10, TI Keystone and Cortina Gemini
     SoCs

   - Various subsystem-wide cleanups

  Updates for existing SoC-specific drivers

   - TI GPMC (General Purpose Memory Controller)

   - Mediatek "scpsys" system controller support for MT6797

   - Broadcom "brcmstb_gisb" bus arbitrer

   - ARM SCPI firmware

   - Renesas "SYSC" system controller

  One more driver update was submitted for the Freescale/NXP DPAA data
  path acceleration that has previously been used on PowerPC chips. I
  ended up postponing the merge until some API questions for its unusual
  MMIO access are resolved"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (35 commits)
  clocksource: owl: Add S900 support
  clocksource: Add Owl timer
  soc: renesas: rcar-sysc: Use GENPD_FLAG_ALWAYS_ON
  firmware: tegra: Fix locking bugs in BPMP
  soc/tegra: flowctrl: Fix error handling
  soc/tegra: bpmp: Implement generic PM domains
  soc/tegra: bpmp: Update ABI header
  PM / Domains: Allow overriding the ->xlate() callback
  soc: brcmstb: enable drivers for ARM64 and BMIPS
  soc: renesas: Rework Kconfig and Makefile logic
  reset: Add the TI SCI reset driver
  dt-bindings: reset: Add TI SCI reset binding
  reset: use kref for reference counting
  soc: qcom: smsm: Improve error handling, quiesce probe deferral
  cpufreq: scpi: use new scpi_ops functions to remove duplicate code
  firmware: arm_scpi: add support to populate OPPs and get transition latency
  dt-bindings: reset: Add reset manager offsets for Stratix10
  memory: omap-gpmc: add error message if bank-width property is absent
  memory: omap-gpmc: make dts snippet include semicolon
  reset: Add a Gemini reset controller
  ...

Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt

@@ -3,7 +3,8 @@ Broadcom GISB bus Arbiter controller
 Required properties:
 
 - compatible:
-    "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for 28nm chips
+    "brcm,bcm7278-gisb-arb" for V7 28nm chips
+    "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for other 28nm chips
     "brcm,bcm7435-gisb-arb" for newer 40nm chips
     "brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips
     "brcm,bcm7038-gisb-arb" for 130nm chips

Documentation/devicetree/bindings/reset/ti,sci-reset.txt

+Texas Instruments System Control Interface (TI-SCI) Reset Controller
+=====================================================================
+
+Some TI SoCs contain a system controller (like the Power Management Micro
+Controller (PMMC) on Keystone 66AK2G SoC) that are responsible for controlling
+the state of the various hardware modules present on the SoC. Communication
+between the host processor running an OS and the system controller happens
+through a protocol called TI System Control Interface (TI-SCI protocol).
+For TI SCI details, please refer to the document,
+Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
+
+TI-SCI Reset Controller Node
+============================
+This reset controller node uses the TI SCI protocol to perform the reset
+management of various hardware modules present on the SoC. Must be a child
+node of the associated TI-SCI system controller node.
+
+Required properties:
+--------------------
+ - compatible	: Should be "ti,sci-reset"
+ - #reset-cells	: Should be 2. Please see the reset consumer node below for
+		  usage details.
+
+TI-SCI Reset Consumer Nodes
+===========================
+Each of the reset consumer nodes should have the following properties,
+in addition to their own properties.
+
+Required properties:
+--------------------
+ - resets	: A phandle and reset specifier pair, one pair for each reset
+		  signal that affects the device, or that the device manages.
+		  The phandle should point to the TI-SCI reset controller node,
+		  and the reset specifier should have 2 cell-values. The first
+		  cell should contain the device ID. The second cell should
+		  contain the reset mask value used by system controller.
+		  Please refer to the protocol documentation for these values
+		  to be used for different devices,
+		  http://processors.wiki.ti.com/index.php/TISCI#66AK2G02_Data
+
+Please also refer to Documentation/devicetree/bindings/reset/reset.txt for
+common reset controller usage by consumers.
+
+Example:
+--------
+The following example demonstrates both a TI-SCI reset controller node and a
+consumer (a DSP device) on the 66AK2G SoC.
+
+pmmc: pmmc {
+	compatible = "ti,k2g-sci";
+
+	k2g_reset: reset-controller {
+		compatible = "ti,sci-reset";
+		#reset-cells = <2>;
+	};
+};
+
+dsp0: dsp@10800000 {
+	...
+	resets = <&k2g_reset 0x0046 0x1>;
+	...
+};

MAINTAINERS

@@ -12682,6 +12682,8 @@ F:	include/linux/soc/ti/ti_sci_protocol.h
 F:	Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
 F:	include/dt-bindings/genpd/k2g.h
 F:	drivers/soc/ti/ti_sci_pm_domains.c
+F:	Documentation/devicetree/bindings/reset/ti,sci-reset.txt
+F:	drivers/reset/reset-ti-sci.c
 
 THANKO'S RAREMONO AM/FM/SW RADIO RECEIVER USB DRIVER
 M:	Hans Verkuil <hverkuil@xs4all.nl>

drivers/base/power/domain.c

@@ -1637,9 +1637,6 @@ EXPORT_SYMBOL_GPL(pm_genpd_remove);
 
 #ifdef CONFIG_PM_GENERIC_DOMAINS_OF
 
-typedef struct generic_pm_domain *(*genpd_xlate_t)(struct of_phandle_args *args,
-						   void *data);
-
 /*
  * Device Tree based PM domain providers.
  *
@@ -1795,6 +1792,9 @@ int of_genpd_add_provider_onecell(struct device_node *np,
 
 	mutex_lock(&gpd_list_lock);
 
+	if (!data->xlate)
+		data->xlate = genpd_xlate_onecell;
+
 	for (i = 0; i < data->num_domains; i++) {
 		if (!data->domains[i])
 			continue;
@@ -1805,7 +1805,7 @@ int of_genpd_add_provider_onecell(struct device_node *np,
 		data->domains[i]->has_provider = true;
 	}
 
-	ret = genpd_add_provider(np, genpd_xlate_onecell, data);
+	ret = genpd_add_provider(np, data->xlate, data);
 	if (ret < 0)
 		goto error;
 

drivers/bus/Kconfig

@@ -57,7 +57,7 @@ config ARM_CCN
 
 config BRCMSTB_GISB_ARB
 	bool "Broadcom STB GISB bus arbiter"
-	depends on ARM || MIPS
+	depends on ARM || ARM64 || MIPS
 	default ARCH_BRCMSTB || BMIPS_GENERIC
 	help
 	  Driver for the Broadcom Set Top Box System-on-a-chip internal bus

drivers/bus/brcmstb_gisb.c

 /*
- * Copyright (C) 2014 Broadcom Corporation
+ * Copyright (C) 2014-2017 Broadcom
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -24,11 +24,9 @@
 #include <linux/of.h>
 #include <linux/bitops.h>
 #include <linux/pm.h>
-
-#ifdef CONFIG_ARM
-#include <asm/bug.h>
-#include <asm/signal.h>
-#endif
+#include <linux/kernel.h>
+#include <linux/kdebug.h>
+#include <linux/notifier.h>
 
 #ifdef CONFIG_MIPS
 #include <asm/traps.h>
@@ -37,8 +35,6 @@
 #define  ARB_ERR_CAP_CLEAR		(1 << 0)
 #define  ARB_ERR_CAP_STATUS_TIMEOUT	(1 << 12)
 #define  ARB_ERR_CAP_STATUS_TEA		(1 << 11)
-#define  ARB_ERR_CAP_STATUS_BS_SHIFT	(1 << 2)
-#define  ARB_ERR_CAP_STATUS_BS_MASK	0x3c
 #define  ARB_ERR_CAP_STATUS_WRITE	(1 << 1)
 #define  ARB_ERR_CAP_STATUS_VALID	(1 << 0)
 
@@ -47,7 +43,6 @@ enum {
 	ARB_ERR_CAP_CLR,
 	ARB_ERR_CAP_HI_ADDR,
 	ARB_ERR_CAP_ADDR,
-	ARB_ERR_CAP_DATA,
 	ARB_ERR_CAP_STATUS,
 	ARB_ERR_CAP_MASTER,
 };
@@ -57,17 +52,24 @@ static const int gisb_offsets_bcm7038[] = {
 	[ARB_ERR_CAP_CLR]	= 0x0c4,
 	[ARB_ERR_CAP_HI_ADDR]	= -1,
 	[ARB_ERR_CAP_ADDR]	= 0x0c8,
-	[ARB_ERR_CAP_DATA]	= 0x0cc,
 	[ARB_ERR_CAP_STATUS]	= 0x0d0,
 	[ARB_ERR_CAP_MASTER]	= -1,
 };
 
+static const int gisb_offsets_bcm7278[] = {
+	[ARB_TIMER]		= 0x008,
+	[ARB_ERR_CAP_CLR]	= 0x7f8,
+	[ARB_ERR_CAP_HI_ADDR]	= -1,
+	[ARB_ERR_CAP_ADDR]	= 0x7e0,
+	[ARB_ERR_CAP_STATUS]	= 0x7f0,
+	[ARB_ERR_CAP_MASTER]	= 0x7f4,
+};
+
 static const int gisb_offsets_bcm7400[] = {
 	[ARB_TIMER]		= 0x00c,
 	[ARB_ERR_CAP_CLR]	= 0x0c8,
 	[ARB_ERR_CAP_HI_ADDR]	= -1,
 	[ARB_ERR_CAP_ADDR]	= 0x0cc,
-	[ARB_ERR_CAP_DATA]	= 0x0d0,
 	[ARB_ERR_CAP_STATUS]	= 0x0d4,
 	[ARB_ERR_CAP_MASTER]	= 0x0d8,
 };
@@ -77,7 +79,6 @@ static const int gisb_offsets_bcm7435[] = {
 	[ARB_ERR_CAP_CLR]	= 0x168,
 	[ARB_ERR_CAP_HI_ADDR]	= -1,
 	[ARB_ERR_CAP_ADDR]	= 0x16c,
-	[ARB_ERR_CAP_DATA]	= 0x170,
 	[ARB_ERR_CAP_STATUS]	= 0x174,
 	[ARB_ERR_CAP_MASTER]	= 0x178,
 };
@@ -87,7 +88,6 @@ static const int gisb_offsets_bcm7445[] = {
 	[ARB_ERR_CAP_CLR]	= 0x7e4,
 	[ARB_ERR_CAP_HI_ADDR]	= 0x7e8,
 	[ARB_ERR_CAP_ADDR]	= 0x7ec,
-	[ARB_ERR_CAP_DATA]	= 0x7f0,
 	[ARB_ERR_CAP_STATUS]	= 0x7f4,
 	[ARB_ERR_CAP_MASTER]	= 0x7f8,
 };
@@ -109,9 +109,13 @@ static u32 gisb_read(struct brcmstb_gisb_arb_device *gdev, int reg)
 {
 	int offset = gdev->gisb_offsets[reg];
 
-	/* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
-	if (offset == -1)
-		return 1;
+	if (offset < 0) {
+		/* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
+		if (reg == ARB_ERR_CAP_MASTER)
+			return 1;
+		else
+			return 0;
+	}
 
 	if (gdev->big_endian)
 		return ioread32be(gdev->base + offset);
@@ -119,6 +123,16 @@ static u32 gisb_read(struct brcmstb_gisb_arb_device *gdev, int reg)
 		return ioread32(gdev->base + offset);
 }
 
+static u64 gisb_read_address(struct brcmstb_gisb_arb_device *gdev)
+{
+	u64 value;
+
+	value = gisb_read(gdev, ARB_ERR_CAP_ADDR);
+	value |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
+
+	return value;
+}
+
 static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
 {
 	int offset = gdev->gisb_offsets[reg];
@@ -127,9 +141,9 @@ static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
 		return;
 
 	if (gdev->big_endian)
-		iowrite32be(val, gdev->base + reg);
+		iowrite32be(val, gdev->base + offset);
 	else
-		iowrite32(val, gdev->base + reg);
+		iowrite32(val, gdev->base + offset);
 }
 
 static ssize_t gisb_arb_get_timeout(struct device *dev,
@@ -185,7 +199,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
 					const char *reason)
 {
 	u32 cap_status;
-	unsigned long arb_addr;
+	u64 arb_addr;
 	u32 master;
 	const char *m_name;
 	char m_fmt[11];
@@ -197,10 +211,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
 		return 1;
 
 	/* Read the address and master */
-	arb_addr = gisb_read(gdev, ARB_ERR_CAP_ADDR) & 0xffffffff;
-#if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT))
-	arb_addr |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
-#endif
+	arb_addr = gisb_read_address(gdev);
 	master = gisb_read(gdev, ARB_ERR_CAP_MASTER);
 
 	m_name = brcmstb_gisb_master_to_str(gdev, master);
@@ -209,7 +220,7 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
 		m_name = m_fmt;
 	}
 
-	pr_crit("%s: %s at 0x%lx [%c %s], core: %s\n",
+	pr_crit("%s: %s at 0x%llx [%c %s], core: %s\n",
 		__func__, reason, arb_addr,
 		cap_status & ARB_ERR_CAP_STATUS_WRITE ? 'W' : 'R',
 		cap_status & ARB_ERR_CAP_STATUS_TIMEOUT ? "timeout" : "",
@@ -221,27 +232,6 @@ static int brcmstb_gisb_arb_decode_addr(struct brcmstb_gisb_arb_device *gdev,
 	return 0;
 }
 
-#ifdef CONFIG_ARM
-static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
-				     struct pt_regs *regs)
-{
-	int ret = 0;
-	struct brcmstb_gisb_arb_device *gdev;
-
-	/* iterate over each GISB arb registered handlers */
-	list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
-		ret |= brcmstb_gisb_arb_decode_addr(gdev, "bus error");
-	/*
-	 * If it was an imprecise abort, then we need to correct the
-	 * return address to be _after_ the instruction.
-	*/
-	if (fsr & (1 << 10))
-		regs->ARM_pc += 4;
-
-	return ret;
-}
-#endif
-
 #ifdef CONFIG_MIPS
 static int brcmstb_bus_error_handler(struct pt_regs *regs, int is_fixup)
 {
@@ -279,6 +269,36 @@ static irqreturn_t brcmstb_gisb_tea_handler(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
+/*
+ * Dump out gisb errors on die or panic.
+ */
+static int dump_gisb_error(struct notifier_block *self, unsigned long v,
+			   void *p);
+
+static struct notifier_block gisb_die_notifier = {
+	.notifier_call = dump_gisb_error,
+};
+
+static struct notifier_block gisb_panic_notifier = {
+	.notifier_call = dump_gisb_error,
+};
+
+static int dump_gisb_error(struct notifier_block *self, unsigned long v,
+			   void *p)
+{
+	struct brcmstb_gisb_arb_device *gdev;
+	const char *reason = "panic";
+
+	if (self == &gisb_die_notifier)
+		reason = "die";
+
+	/* iterate over each GISB arb registered handlers */
+	list_for_each_entry(gdev, &brcmstb_gisb_arb_device_list, next)
+		brcmstb_gisb_arb_decode_addr(gdev, reason);
+
+	return NOTIFY_DONE;
+}
+
 static DEVICE_ATTR(gisb_arb_timeout, S_IWUSR | S_IRUGO,
 		gisb_arb_get_timeout, gisb_arb_set_timeout);
 
@@ -296,6 +316,7 @@ static const struct of_device_id brcmstb_gisb_arb_of_match[] = {
 	{ .compatible = "brcm,bcm7445-gisb-arb", .data = gisb_offsets_bcm7445 },
 	{ .compatible = "brcm,bcm7435-gisb-arb", .data = gisb_offsets_bcm7435 },
 	{ .compatible = "brcm,bcm7400-gisb-arb", .data = gisb_offsets_bcm7400 },
+	{ .compatible = "brcm,bcm7278-gisb-arb", .data = gisb_offsets_bcm7278 },
 	{ .compatible = "brcm,bcm7038-gisb-arb", .data = gisb_offsets_bcm7038 },
 	{ },
 };
@@ -378,14 +399,16 @@ static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
 
 	list_add_tail(&gdev->next, &brcmstb_gisb_arb_device_list);
 
-#ifdef CONFIG_ARM
-	hook_fault_code(22, brcmstb_bus_error_handler, SIGBUS, 0,
-			"imprecise external abort");
-#endif
 #ifdef CONFIG_MIPS
 	board_be_handler = brcmstb_bus_error_handler;
 #endif
 
+	if (list_is_singular(&brcmstb_gisb_arb_device_list)) {
+		register_die_notifier(&gisb_die_notifier);
+		atomic_notifier_chain_register(&panic_notifier_list,
+					       &gisb_panic_notifier);
+	}
+
 	dev_info(&pdev->dev, "registered mem: %p, irqs: %d, %d\n",
 			gdev->base, timeout_irq, tea_irq);
 

drivers/clocksource/Kconfig

@@ -103,6 +103,13 @@ config ORION_TIMER
 	help
 	  Enables the support for the Orion timer driver
 
+config OWL_TIMER
+	bool "Owl timer driver" if COMPILE_TEST
+	depends on GENERIC_CLOCKEVENTS
+	select CLKSRC_MMIO
+	help
+	  Enables the support for the Actions Semi Owl timer driver.
+
 config SUN4I_TIMER
 	bool "Sun4i timer driver" if COMPILE_TEST
 	depends on GENERIC_CLOCKEVENTS

drivers/clocksource/Makefile

@@ -52,6 +52,7 @@ obj-$(CONFIG_CLKSRC_PISTACHIO)	+= time-pistachio.o
 obj-$(CONFIG_CLKSRC_TI_32K)	+= timer-ti-32k.o
 obj-$(CONFIG_CLKSRC_NPS)	+= timer-nps.o
 obj-$(CONFIG_OXNAS_RPS_TIMER)	+= timer-oxnas-rps.o
+obj-$(CONFIG_OWL_TIMER)		+= owl-timer.o
 
 obj-$(CONFIG_ARC_TIMERS)		+= arc_timer.o
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o

drivers/clocksource/owl-timer.c

+/*
+ * Actions Semi Owl timer
+ *
+ * Copyright 2012 Actions Semi Inc.
+ * Author: Actions Semi, Inc.
+ *
+ * Copyright (c) 2017 SUSE Linux GmbH
+ * Author: Andreas Färber
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/irqreturn.h>
+#include <linux/sched_clock.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#define OWL_Tx_CTL		0x0
+#define OWL_Tx_CMP		0x4
+#define OWL_Tx_VAL		0x8
+
+#define OWL_Tx_CTL_PD		BIT(0)
+#define OWL_Tx_CTL_INTEN	BIT(1)
+#define OWL_Tx_CTL_EN		BIT(2)
+
+static void __iomem *owl_timer_base;
+static void __iomem *owl_clksrc_base;
+static void __iomem *owl_clkevt_base;
+
+static inline void owl_timer_reset(void __iomem *base)
+{
+	writel(0, base + OWL_Tx_CTL);
+	writel(0, base + OWL_Tx_VAL);
+	writel(0, base + OWL_Tx_CMP);
+}
+
+static inline void owl_timer_set_enabled(void __iomem *base, bool enabled)
+{
+	u32 ctl = readl(base + OWL_Tx_CTL);
+
+	/* PD bit is cleared when set */
+	ctl &= ~OWL_Tx_CTL_PD;
+
+	if (enabled)
+		ctl |= OWL_Tx_CTL_EN;
+	else
+		ctl &= ~OWL_Tx_CTL_EN;
+
+	writel(ctl, base + OWL_Tx_CTL);
+}
+
+static u64 notrace owl_timer_sched_read(void)
+{
+	return (u64)readl(owl_clksrc_base + OWL_Tx_VAL);
+}
+
+static int owl_timer_set_state_shutdown(struct clock_event_device *evt)
+{
+	owl_timer_set_enabled(owl_clkevt_base, false);
+
+	return 0;
+}
+
+static int owl_timer_set_state_oneshot(struct clock_event_device *evt)
+{
+	owl_timer_reset(owl_clkevt_base);
+
+	return 0;
+}
+
+static int owl_timer_tick_resume(struct clock_event_device *evt)
+{
+	return 0;
+}
+
+static int owl_timer_set_next_event(unsigned long evt,
+				    struct clock_event_device *ev)
+{
+	void __iomem *base = owl_clkevt_base;
+
+	owl_timer_set_enabled(base, false);
+	writel(OWL_Tx_CTL_INTEN, base + OWL_Tx_CTL);
+	writel(0, base + OWL_Tx_VAL);
+	writel(evt, base + OWL_Tx_CMP);
+	owl_timer_set_enabled(base, true);
+
+	return 0;
+}
+
+static struct clock_event_device owl_clockevent = {
+	.name			= "owl_tick",
+	.rating			= 200,
+	.features		= CLOCK_EVT_FEAT_ONESHOT |
+				  CLOCK_EVT_FEAT_DYNIRQ,
+	.set_state_shutdown	= owl_timer_set_state_shutdown,
+	.set_state_oneshot	= owl_timer_set_state_oneshot,
+	.tick_resume		= owl_timer_tick_resume,
+	.set_next_event		= owl_timer_set_next_event,
+};
+
+static irqreturn_t owl_timer1_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = (struct clock_event_device *)dev_id;
+
+	writel(OWL_Tx_CTL_PD, owl_clkevt_base + OWL_Tx_CTL);
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static int __init owl_timer_init(struct device_node *node)
+{
+	struct clk *clk;
+	unsigned long rate;
+	int timer1_irq, ret;
+
+	owl_timer_base = of_io_request_and_map(node, 0, "owl-timer");
+	if (IS_ERR(owl_timer_base)) {
+		pr_err("Can't map timer registers");
+		return PTR_ERR(owl_timer_base);
+	}
+
+	owl_clksrc_base = owl_timer_base + 0x08;
+	owl_clkevt_base = owl_timer_base + 0x14;
+
+	timer1_irq = of_irq_get_byname(node, "timer1");
+	if (timer1_irq <= 0) {
+		pr_err("Can't parse timer1 IRQ");
+		return -EINVAL;
+	}
+
+	clk = of_clk_get(node, 0);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	rate = clk_get_rate(clk);
+
+	owl_timer_reset(owl_clksrc_base);
+	owl_timer_set_enabled(owl_clksrc_base, true);
+
+	sched_clock_register(owl_timer_sched_read, 32, rate);
+	clocksource_mmio_init(owl_clksrc_base + OWL_Tx_VAL, node->name,
+			      rate, 200, 32, clocksource_mmio_readl_up);
+
+	owl_timer_reset(owl_clkevt_base);
+
+	ret = request_irq(timer1_irq, owl_timer1_interrupt, IRQF_TIMER,
+			  "owl-timer", &owl_clockevent);
+	if (ret) {
+		pr_err("failed to request irq %d\n", timer1_irq);
+		return ret;
+	}
+
+	owl_clockevent.cpumask = cpumask_of(0);
+	owl_clockevent.irq = timer1_irq;
+
+	clockevents_config_and_register(&owl_clockevent, rate,
+					0xf, 0xffffffff);
+
+	return 0;
+}
+CLOCKSOURCE_OF_DECLARE(owl_s500, "actions,s500-timer", owl_timer_init);
+CLOCKSOURCE_OF_DECLARE(owl_s900, "actions,s900-timer", owl_timer_init);

drivers/cpufreq/scpi-cpufreq.c

@@ -30,46 +30,20 @@
 
 static struct scpi_ops *scpi_ops;
 
-static struct scpi_dvfs_info *scpi_get_dvfs_info(struct device *cpu_dev)
-{
-	int domain = topology_physical_package_id(cpu_dev->id);
-
-	if (domain < 0)
-		return ERR_PTR(-EINVAL);
-	return scpi_ops->dvfs_get_info(domain);
-}
-
 static int scpi_get_transition_latency(struct device *cpu_dev)
 {
-	struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
-
-	if (IS_ERR(info))
-		return PTR_ERR(info);
-	return info->latency;
+	return scpi_ops->get_transition_latency(cpu_dev);
 }
 
 static int scpi_init_opp_table(const struct cpumask *cpumask)
 {
-	int idx, ret;
-	struct scpi_opp *opp;
+	int ret;
 	struct device *cpu_dev = get_cpu_device(cpumask_first(cpumask));
-	struct scpi_dvfs_info *info = scpi_get_dvfs_info(cpu_dev);
-
-	if (IS_ERR(info))
-		return PTR_ERR(info);
-
-	if (!info->opps)
-		return -EIO;
 
-	for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) {
-		ret = dev_pm_opp_add(cpu_dev, opp->freq, opp->m_volt * 1000);
-		if (ret) {
-			dev_warn(cpu_dev, "failed to add opp %uHz %umV\n",
-				 opp->freq, opp->m_volt);
-			while (idx-- > 0)
-				dev_pm_opp_remove(cpu_dev, (--opp)->freq);
-			return ret;
-		}
+	ret = scpi_ops->add_opps_to_device(cpu_dev);
+	if (ret) {
+		dev_warn(cpu_dev, "failed to add opps to the device\n");
+		return ret;
 	}
 
 	ret = dev_pm_opp_set_sharing_cpus(cpu_dev, cpumask);

drivers/firmware/arm_scpi.c

@@ -39,6 +39,7 @@
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/printk.h>
+#include <linux/pm_opp.h>
 #include <linux/scpi_protocol.h>
 #include <linux/slab.h>
 #include <linux/sort.h>
@@ -684,6 +685,65 @@ static struct scpi_dvfs_info *scpi_dvfs_get_info(u8 domain)
 	return info;
 }
 
+static int scpi_dev_domain_id(struct device *dev)
+{
+	struct of_phandle_args clkspec;
+
+	if (of_parse_phandle_with_args(dev->of_node, "clocks", "#clock-cells",
+				       0, &clkspec))
+		return -EINVAL;
+
+	return clkspec.args[0];
+}
+
+static struct scpi_dvfs_info *scpi_dvfs_info(struct device *dev)
+{
+	int domain = scpi_dev_domain_id(dev);
+
+	if (domain < 0)
+		return ERR_PTR(domain);
+
+	return scpi_dvfs_get_info(domain);
+}
+
+static int scpi_dvfs_get_transition_latency(struct device *dev)
+{
+	struct scpi_dvfs_info *info = scpi_dvfs_info(dev);
+
+	if (IS_ERR(info))
+		return PTR_ERR(info);
+
+	if (!info->latency)
+		return 0;
+
+	return info->latency;
+}
+
+static int scpi_dvfs_add_opps_to_device(struct device *dev)
+{
+	int idx, ret;
+	struct scpi_opp *opp;
+	struct scpi_dvfs_info *info = scpi_dvfs_info(dev);
+
+	if (IS_ERR(info))
+		return PTR_ERR(info);
+
+	if (!info->opps)
+		return -EIO;
+
+	for (opp = info->opps, idx = 0; idx < info->count; idx++, opp++) {
+		ret = dev_pm_opp_add(dev, opp->freq, opp->m_volt * 1000);
+		if (ret) {
+			dev_warn(dev, "failed to add opp %uHz %umV\n",
+				 opp->freq, opp->m_volt);
+			while (idx-- > 0)
+				dev_pm_opp_remove(dev, (--opp)->freq);
+			return ret;
+		}
+	}
+	return 0;
+}
+
 static int scpi_sensor_get_capability(u16 *sensors)
 {
 	struct sensor_capabilities cap_buf;
@@ -765,6 +825,9 @@ static struct scpi_ops scpi_ops = {
 	.dvfs_get_idx = scpi_dvfs_get_idx,
 	.dvfs_set_idx = scpi_dvfs_set_idx,
 	.dvfs_get_info = scpi_dvfs_get_info,
+	.device_domain_id = scpi_dev_domain_id,
+	.get_transition_latency = scpi_dvfs_get_transition_latency,
+	.add_opps_to_device = scpi_dvfs_add_opps_to_device,
 	.sensor_get_capability = scpi_sensor_get_capability,
 	.sensor_get_info = scpi_sensor_get_info,
 	.sensor_get_value = scpi_sensor_get_value,

drivers/firmware/tegra/bpmp.c

@@ -211,14 +211,17 @@ static ssize_t tegra_bpmp_channel_read(struct tegra_bpmp_channel *channel,
 	int index;
 
 	index = tegra_bpmp_channel_get_thread_index(channel);
-	if (index < 0)
-		return index;
+	if (index < 0) {
+		err = index;
+		goto unlock;
+	}
 
 	spin_lock_irqsave(&bpmp->lock, flags);
 	err = __tegra_bpmp_channel_read(channel, data, size);
 	clear_bit(index, bpmp->threaded.allocated);
 	spin_unlock_irqrestore(&bpmp->lock, flags);
 
+unlock:
 	up(&bpmp->threaded.lock);
 
 	return err;
@@ -256,18 +259,18 @@ tegra_bpmp_write_threaded(struct tegra_bpmp *bpmp, unsigned int mrq,
 
 	index = find_first_zero_bit(bpmp->threaded.allocated, count);
 	if (index == count) {
-		channel = ERR_PTR(-EBUSY);
+		err = -EBUSY;
 		goto unlock;
 	}
 
 	channel = tegra_bpmp_channel_get_thread(bpmp, index);
 	if (!channel) {
-		channel = ERR_PTR(-EINVAL);
+		err = -EINVAL;
 		goto unlock;
 	}
 
 	if (!tegra_bpmp_master_free(channel)) {
-		channel = ERR_PTR(-EBUSY);
+		err = -EBUSY;
 		goto unlock;
 	}
 
@@ -275,16 +278,21 @@ tegra_bpmp_write_threaded(struct tegra_bpmp *bpmp, unsigned int mrq,
 
 	err = __tegra_bpmp_channel_write(channel, mrq, MSG_ACK | MSG_RING,
 					 data, size);
-	if (err < 0) {
-		clear_bit(index, bpmp->threaded.allocated);
-		goto unlock;
-	}
+	if (err < 0)
+		goto clear_allocated;
 
 	set_bit(index, bpmp->threaded.busy);
 
-unlock:
 	spin_unlock_irqrestore(&bpmp->lock, flags);
 	return channel;
+
+clear_allocated:
+	clear_bit(index, bpmp->threaded.allocated);
+unlock:
+	spin_unlock_irqrestore(&bpmp->lock, flags);
+	up(&bpmp->threaded.lock);
+
+	return ERR_PTR(err);
 }
 
 static ssize_t tegra_bpmp_channel_write(struct tegra_bpmp_channel *channel,
@@ -810,6 +818,10 @@ static int tegra_bpmp_probe(struct platform_device *pdev)
 	if (err < 0)
 		goto free_mrq;
 
+	err = tegra_bpmp_init_powergates(bpmp);
+	if (err < 0)
+		goto free_mrq;
+
 	platform_set_drvdata(pdev, bpmp);
 
 	return 0;

drivers/memory/omap-gpmc.c

@@ -460,12 +460,12 @@ static int get_gpmc_timing_reg(
 		if (l)
 			time_ns_min = gpmc_clk_ticks_to_ns(l - 1, cs, cd) + 1;
 		time_ns = gpmc_clk_ticks_to_ns(l, cs, cd);
-		pr_info("gpmc,%s = <%u> /* %u ns - %u ns; %i ticks%s*/\n",
+		pr_info("gpmc,%s = <%u>; /* %u ns - %u ns; %i ticks%s*/\n",
 			name, time_ns, time_ns_min, time_ns, l,
 			invalid ? "; invalid " : " ");
 	} else {
 		/* raw format */
-		pr_info("gpmc,%s = <%u>%s\n", name, l,
+		pr_info("gpmc,%s = <%u>;%s\n", name, l,
 			invalid ? " /* invalid */" : "");
 	}
 
@@ -2083,8 +2083,11 @@ static int gpmc_probe_generic_child(struct platform_device *pdev,
 	} else {
 		ret = of_property_read_u32(child, "bank-width",
 					   &gpmc_s.device_width);
-		if (ret < 0)
+		if (ret < 0) {
+			dev_err(&pdev->dev, "%s has no 'bank-width' property\n",
+				child->full_name);
 			goto err;
+		}
 	}
 
 	/* Reserve wait pin if it is required and valid */

drivers/reset/Kconfig

@@ -34,6 +34,13 @@ config RESET_BERLIN
 	help
 	  This enables the reset controller driver for Marvell Berlin SoCs.
 
+config RESET_GEMINI
+	bool "Gemini Reset Driver" if COMPILE_TEST
+	default ARCH_GEMINI
+	select MFD_SYSCON
+	help
+	  This enables the reset controller driver for Cortina Systems Gemini.
+
 config RESET_IMX7
 	bool "i.MX7 Reset Driver" if COMPILE_TEST
 	default SOC_IMX7D
@@ -80,7 +87,15 @@ config RESET_SUNXI
 	help
 	  This enables the reset driver for Allwinner SoCs.
 
-config TI_SYSCON_RESET
+config RESET_TI_SCI
+	tristate "TI System Control Interface (TI-SCI) reset driver"
+	depends on TI_SCI_PROTOCOL
+	help
+	  This enables the reset driver support over TI System Control Interface
+	  available on some new TI's SoCs. If you wish to use reset resources
+	  managed by the TI System Controller, say Y here. Otherwise, say N.
+
+config RESET_TI_SYSCON
 	tristate "TI SYSCON Reset Driver"
 	depends on HAS_IOMEM
 	select MFD_SYSCON

drivers/reset/Makefile

@@ -5,6 +5,7 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/
 obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
 obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
 obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
+obj-$(CONFIG_RESET_GEMINI) += reset-gemini.o
 obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
 obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
 obj-$(CONFIG_RESET_MESON) += reset-meson.o
@@ -13,7 +14,8 @@ obj-$(CONFIG_RESET_PISTACHIO) += reset-pistachio.o
 obj-$(CONFIG_RESET_SOCFPGA) += reset-socfpga.o
 obj-$(CONFIG_RESET_STM32) += reset-stm32.o
 obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
-obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
+obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
+obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
 obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
 obj-$(CONFIG_RESET_ZX2967) += reset-zx2967.o
 obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o

drivers/reset/core.c

@@ -13,6 +13,7 @@
 #include <linux/err.h>
 #include <linux/export.h>
 #include <linux/kernel.h>
+#include <linux/kref.h>
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/reset.h>
@@ -40,7 +41,7 @@ struct reset_control {
 	struct reset_controller_dev *rcdev;
 	struct list_head list;
 	unsigned int id;
-	unsigned int refcnt;
+	struct kref refcnt;
 	bool shared;
 	atomic_t deassert_count;
 	atomic_t triggered_count;
@@ -288,7 +289,7 @@ static struct reset_control *__reset_control_get_internal(
 			if (WARN_ON(!rstc->shared || !shared))
 				return ERR_PTR(-EBUSY);
 
-			rstc->refcnt++;
+			kref_get(&rstc->refcnt);
 			return rstc;
 		}
 	}
@@ -302,18 +303,18 @@ static struct reset_control *__reset_control_get_internal(
 	rstc->rcdev = rcdev;
 	list_add(&rstc->list, &rcdev->reset_control_head);
 	rstc->id = index;
-	rstc->refcnt = 1;
+	kref_init(&rstc->refcnt);
 	rstc->shared = shared;
 
 	return rstc;
 }
 
-static void __reset_control_put_internal(struct reset_control *rstc)
+static void __reset_control_release(struct kref *kref)
 {
-	lockdep_assert_held(&reset_list_mutex);
+	struct reset_control *rstc = container_of(kref, struct reset_control,
+						  refcnt);
 
-	if (--rstc->refcnt)
-		return;
+	lockdep_assert_held(&reset_list_mutex);
 
 	module_put(rstc->rcdev->owner);
 
@@ -321,6 +322,13 @@ static void __reset_control_put_internal(struct reset_control *rstc)
 	kfree(rstc);
 }
 
+static void __reset_control_put_internal(struct reset_control *rstc)
+{
+	lockdep_assert_held(&reset_list_mutex);
+
+	kref_put(&rstc->refcnt, __reset_control_release);
+}
+
 struct reset_control *__of_reset_control_get(struct device_node *node,
 				     const char *id, int index, bool shared,
 				     bool optional)
@@ -400,7 +408,6 @@ EXPORT_SYMBOL_GPL(__reset_control_get);
  * reset_control_put - free the reset controller
  * @rstc: reset controller
  */
-
 void reset_control_put(struct reset_control *rstc)
 {
 	if (IS_ERR_OR_NULL(rstc))

drivers/reset/reset-gemini.c

+/*
+ * Cortina Gemini Reset controller driver
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <dt-bindings/reset/cortina,gemini-reset.h>
+
+/**
+ * struct gemini_reset - gemini reset controller
+ * @map: regmap to access the containing system controller
+ * @rcdev: reset controller device
+ */
+struct gemini_reset {
+	struct regmap *map;
+	struct reset_controller_dev rcdev;
+};
+
+#define GEMINI_GLOBAL_SOFT_RESET 0x0c
+
+#define to_gemini_reset(p) \
+	container_of((p), struct gemini_reset, rcdev)
+
+/*
+ * This is a self-deasserting reset controller.
+ */
+static int gemini_reset(struct reset_controller_dev *rcdev,
+			unsigned long id)
+{
+	struct gemini_reset *gr = to_gemini_reset(rcdev);
+
+	/* Manual says to always set BIT 30 (CPU1) to 1 */
+	return regmap_write(gr->map,
+			    GEMINI_GLOBAL_SOFT_RESET,
+			    BIT(GEMINI_RESET_CPU1) | BIT(id));
+}
+
+static int gemini_reset_status(struct reset_controller_dev *rcdev,
+			     unsigned long id)
+{
+	struct gemini_reset *gr = to_gemini_reset(rcdev);
+	u32 val;
+	int ret;
+
+	ret = regmap_read(gr->map, GEMINI_GLOBAL_SOFT_RESET, &val);
+	if (ret)
+		return ret;
+
+	return !!(val & BIT(id));
+}
+
+static const struct reset_control_ops gemini_reset_ops = {
+	.reset = gemini_reset,
+	.status = gemini_reset_status,
+};
+
+static int gemini_reset_probe(struct platform_device *pdev)
+{
+	struct gemini_reset *gr;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	gr = devm_kzalloc(dev, sizeof(*gr), GFP_KERNEL);
+	if (!gr)
+		return -ENOMEM;
+
+	gr->map = syscon_node_to_regmap(np);
+	if (IS_ERR(gr->map)) {
+		ret = PTR_ERR(gr->map);
+		dev_err(dev, "unable to get regmap (%d)", ret);
+		return ret;
+	}
+	gr->rcdev.owner = THIS_MODULE;
+	gr->rcdev.nr_resets = 32;
+	gr->rcdev.ops = &gemini_reset_ops;
+	gr->rcdev.of_node = pdev->dev.of_node;
+
+	ret = devm_reset_controller_register(&pdev->dev, &gr->rcdev);
+	if (ret)
+		return ret;
+
+	dev_info(dev, "registered Gemini reset controller\n");
+	return 0;
+}
+
+static const struct of_device_id gemini_reset_dt_ids[] = {
+	{ .compatible = "cortina,gemini-syscon", },
+	{ /* sentinel */ },
+};
+
+static struct platform_driver gemini_reset_driver = {
+	.probe	= gemini_reset_probe,
+	.driver = {
+		.name		= "gemini-reset",
+		.of_match_table	= gemini_reset_dt_ids,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(gemini_reset_driver);

drivers/reset/reset-ti-sci.c

+/*
+ * Texas Instrument's System Control Interface (TI-SCI) reset driver
+ *
+ * Copyright (C) 2015-2017 Texas Instruments Incorporated - http://www.ti.com/
+ *	Andrew F. Davis <afd@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/idr.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/soc/ti/ti_sci_protocol.h>
+
+/**
+ * struct ti_sci_reset_control - reset control structure
+ * @dev_id: SoC-specific device identifier
+ * @reset_mask: reset mask to use for toggling reset
+ * @lock: synchronize reset_mask read-modify-writes
+ */
+struct ti_sci_reset_control {
+	u32 dev_id;
+	u32 reset_mask;
+	struct mutex lock;
+};
+
+/**
+ * struct ti_sci_reset_data - reset controller information structure
+ * @rcdev: reset controller entity
+ * @dev: reset controller device pointer
+ * @sci: TI SCI handle used for communication with system controller
+ * @idr: idr structure for mapping ids to reset control structures
+ */
+struct ti_sci_reset_data {
+	struct reset_controller_dev rcdev;
+	struct device *dev;
+	const struct ti_sci_handle *sci;
+	struct idr idr;
+};
+
+#define to_ti_sci_reset_data(p)	\
+	container_of((p), struct ti_sci_reset_data, rcdev)
+
+/**
+ * ti_sci_reset_set() - program a device's reset
+ * @rcdev: reset controller entity
+ * @id: ID of the reset to toggle
+ * @assert: boolean flag to indicate assert or deassert
+ *
+ * This is a common internal function used to assert or deassert a device's
+ * reset using the TI SCI protocol. The device's reset is asserted if the
+ * @assert argument is true, or deasserted if @assert argument is false.
+ * The mechanism itself is a read-modify-write procedure, the current device
+ * reset register is read using a TI SCI device operation, the new value is
+ * set or un-set using the reset's mask, and the new reset value written by
+ * using another TI SCI device operation.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int ti_sci_reset_set(struct reset_controller_dev *rcdev,
+			    unsigned long id, bool assert)
+{
+	struct ti_sci_reset_data *data = to_ti_sci_reset_data(rcdev);
+	const struct ti_sci_handle *sci = data->sci;
+	const struct ti_sci_dev_ops *dev_ops = &sci->ops.dev_ops;
+	struct ti_sci_reset_control *control;
+	u32 reset_state;
+	int ret;
+
+	control = idr_find(&data->idr, id);
+	if (!control)
+		return -EINVAL;
+
+	mutex_lock(&control->lock);
+
+	ret = dev_ops->get_device_resets(sci, control->dev_id, &reset_state);
+	if (ret)
+		goto out;
+
+	if (assert)
+		reset_state |= control->reset_mask;
+	else
+		reset_state &= ~control->reset_mask;
+
+	ret = dev_ops->set_device_resets(sci, control->dev_id, reset_state);
+out:
+	mutex_unlock(&control->lock);
+
+	return ret;
+}
+
+/**
+ * ti_sci_reset_assert() - assert device reset
+ * @rcdev: reset controller entity
+ * @id: ID of the reset to be asserted
+ *
+ * This function implements the reset driver op to assert a device's reset
+ * using the TI SCI protocol. This invokes the function ti_sci_reset_set()
+ * with the corresponding parameters as passed in, but with the @assert
+ * argument set to true for asserting the reset.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int ti_sci_reset_assert(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	return ti_sci_reset_set(rcdev, id, true);
+}
+
+/**
+ * ti_sci_reset_deassert() - deassert device reset
+ * @rcdev: reset controller entity
+ * @id: ID of the reset to be deasserted
+ *
+ * This function implements the reset driver op to deassert a device's reset
+ * using the TI SCI protocol. This invokes the function ti_sci_reset_set()
+ * with the corresponding parameters as passed in, but with the @assert
+ * argument set to false for deasserting the reset.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int ti_sci_reset_deassert(struct reset_controller_dev *rcdev,
+				 unsigned long id)
+{
+	return ti_sci_reset_set(rcdev, id, false);
+}
+
+/**
+ * ti_sci_reset_status() - check device reset status
+ * @rcdev: reset controller entity
+ * @id: ID of reset to be checked
+ *
+ * This function implements the reset driver op to return the status of a
+ * device's reset using the TI SCI protocol. The reset register value is read
+ * by invoking the TI SCI device operation .get_device_resets(), and the
+ * status of the specific reset is extracted and returned using this reset's
+ * reset mask.
+ *
+ * Return: 0 if reset is deasserted, or a non-zero value if reset is asserted
+ */
+static int ti_sci_reset_status(struct reset_controller_dev *rcdev,
+			       unsigned long id)
+{
+	struct ti_sci_reset_data *data = to_ti_sci_reset_data(rcdev);
+	const struct ti_sci_handle *sci = data->sci;
+	const struct ti_sci_dev_ops *dev_ops = &sci->ops.dev_ops;
+	struct ti_sci_reset_control *control;
+	u32 reset_state;
+	int ret;
+
+	control = idr_find(&data->idr, id);
+	if (!control)
+		return -EINVAL;
+
+	ret = dev_ops->get_device_resets(sci, control->dev_id, &reset_state);
+	if (ret)
+		return ret;
+
+	return reset_state & control->reset_mask;
+}
+
+static const struct reset_control_ops ti_sci_reset_ops = {
+	.assert		= ti_sci_reset_assert,
+	.deassert	= ti_sci_reset_deassert,
+	.status		= ti_sci_reset_status,
+};
+
+/**
+ * ti_sci_reset_of_xlate() - translate a set of OF arguments to a reset ID
+ * @rcdev: reset controller entity
+ * @reset_spec: OF reset argument specifier
+ *
+ * This function performs the translation of the reset argument specifier
+ * values defined in a reset consumer device node. The function allocates a
+ * reset control structure for that device reset, and will be used by the
+ * driver for performing any reset functions on that reset. An idr structure
+ * is allocated and used to map to the reset control structure. This idr
+ * is used by the driver to do reset lookups.
+ *
+ * Return: 0 for successful request, else a corresponding error value
+ */
+static int ti_sci_reset_of_xlate(struct reset_controller_dev *rcdev,
+				 const struct of_phandle_args *reset_spec)
+{
+	struct ti_sci_reset_data *data = to_ti_sci_reset_data(rcdev);
+	struct ti_sci_reset_control *control;
+
+	if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
+		return -EINVAL;
+
+	control = devm_kzalloc(data->dev, sizeof(*control), GFP_KERNEL);
+	if (!control)
+		return -ENOMEM;
+
+	control->dev_id = reset_spec->args[0];
+	control->reset_mask = reset_spec->args[1];
+	mutex_init(&control->lock);
+
+	return idr_alloc(&data->idr, control, 0, 0, GFP_KERNEL);
+}
+
+static const struct of_device_id ti_sci_reset_of_match[] = {
+	{ .compatible = "ti,sci-reset", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, ti_sci_reset_of_match);
+
+static int ti_sci_reset_probe(struct platform_device *pdev)
+{
+	struct ti_sci_reset_data *data;
+
+	if (!pdev->dev.of_node)
+		return -ENODEV;
+
+	data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->sci = devm_ti_sci_get_handle(&pdev->dev);
+	if (IS_ERR(data->sci))
+		return PTR_ERR(data->sci);
+
+	data->rcdev.ops = &ti_sci_reset_ops;
+	data->rcdev.owner = THIS_MODULE;
+	data->rcdev.of_node = pdev->dev.of_node;
+	data->rcdev.of_reset_n_cells = 2;
+	data->rcdev.of_xlate = ti_sci_reset_of_xlate;
+	data->dev = &pdev->dev;
+	idr_init(&data->idr);
+
+	platform_set_drvdata(pdev, data);
+
+	return reset_controller_register(&data->rcdev);
+}
+
+static int ti_sci_reset_remove(struct platform_device *pdev)
+{
+	struct ti_sci_reset_data *data = platform_get_drvdata(pdev);
+
+	reset_controller_unregister(&data->rcdev);
+
+	idr_destroy(&data->idr);
+
+	return 0;
+}
+
+static struct platform_driver ti_sci_reset_driver = {
+	.probe = ti_sci_reset_probe,
+	.remove = ti_sci_reset_remove,
+	.driver = {
+		.name = "ti-sci-reset",
+		.of_match_table = ti_sci_reset_of_match,
+	},
+};
+module_platform_driver(ti_sci_reset_driver);
+
+MODULE_AUTHOR("Andrew F. Davis <afd@ti.com>");
+MODULE_DESCRIPTION("TI System Control Interface (TI SCI) Reset driver");
+MODULE_LICENSE("GPL v2");

drivers/reset/sti/reset-syscfg.c

@@ -145,16 +145,14 @@ static int syscfg_reset_controller_register(struct device *dev,
 				const struct syscfg_reset_controller_data *data)
 {
 	struct syscfg_reset_controller *rc;
-	size_t size;
 	int i, err;
 
 	rc = devm_kzalloc(dev, sizeof(*rc), GFP_KERNEL);
 	if (!rc)
 		return -ENOMEM;
 
-	size = sizeof(struct syscfg_reset_channel) * data->nr_channels;
-
-	rc->channels = devm_kzalloc(dev, size, GFP_KERNEL);
+	rc->channels = devm_kcalloc(dev, data->nr_channels,
+				    sizeof(*rc->channels), GFP_KERNEL);
 	if (!rc->channels)
 		return -ENOMEM;
 

drivers/soc/Kconfig

@@ -7,6 +7,7 @@ source "drivers/soc/fsl/Kconfig"
 source "drivers/soc/imx/Kconfig"
 source "drivers/soc/mediatek/Kconfig"
 source "drivers/soc/qcom/Kconfig"
+source "drivers/soc/renesas/Kconfig"
 source "drivers/soc/rockchip/Kconfig"
 source "drivers/soc/samsung/Kconfig"
 source "drivers/soc/sunxi/Kconfig"

drivers/soc/Makefile

@@ -11,7 +11,7 @@ obj-y				+= fsl/
 obj-$(CONFIG_ARCH_MXC)		+= imx/
 obj-$(CONFIG_ARCH_MEDIATEK)	+= mediatek/
 obj-$(CONFIG_ARCH_QCOM)		+= qcom/
-obj-$(CONFIG_ARCH_RENESAS)	+= renesas/
+obj-y				+= renesas/
 obj-$(CONFIG_ARCH_ROCKCHIP)	+= rockchip/
 obj-$(CONFIG_SOC_SAMSUNG)	+= samsung/
 obj-$(CONFIG_ARCH_SUNXI)	+= sunxi/

drivers/soc/bcm/Kconfig

@@ -11,7 +11,7 @@ config RASPBERRYPI_POWER
 
 config SOC_BRCMSTB
 	bool "Broadcom STB SoC drivers"
-	depends on ARM
+	depends on ARM || ARM64 || BMIPS_GENERIC || COMPILE_TEST
 	select SOC_BUS
 	help
 	  Enables drivers for the Broadcom Set-Top Box (STB) series of chips.

drivers/soc/imx/Makefile

-obj-y += gpc.o
+obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_IMX7_PM_DOMAINS) += gpcv2.o

drivers/soc/mediatek/mtk-pmic-wrap.c

@@ -1117,6 +1117,11 @@ static int pwrap_probe(struct platform_device *pdev)
 	const struct of_device_id *of_slave_id = NULL;
 	struct resource *res;
 
+	if (!of_id) {
+		dev_err(&pdev->dev, "Error: No device match found\n");
+		return -ENODEV;
+	}
+
 	if (pdev->dev.of_node->child)
 		of_slave_id = of_match_node(of_slave_match_tbl,
 					    pdev->dev.of_node->child);
@@ -1200,7 +1205,8 @@ static int pwrap_probe(struct platform_device *pdev)
 
 	if (!(pwrap_readl(wrp, PWRAP_WACS2_RDATA) & PWRAP_STATE_INIT_DONE0)) {
 		dev_dbg(wrp->dev, "initialization isn't finished\n");
-		return -ENODEV;
+		ret = -ENODEV;
+		goto err_out2;
 	}
 
 	/* Initialize watchdog, may not be done by the bootloader */
@@ -1220,8 +1226,10 @@ static int pwrap_probe(struct platform_device *pdev)
 		goto err_out2;
 
 	wrp->regmap = devm_regmap_init(wrp->dev, NULL, wrp, &pwrap_regmap_config);
-	if (IS_ERR(wrp->regmap))
-		return PTR_ERR(wrp->regmap);
+	if (IS_ERR(wrp->regmap)) {
+		ret = PTR_ERR(wrp->regmap);
+		goto err_out2;
+	}
 
 	ret = of_platform_populate(np, NULL, NULL, wrp->dev);
 	if (ret) {

drivers/soc/mediatek/mtk-scpsys.c

@@ -21,6 +21,7 @@
 #include <linux/soc/mediatek/infracfg.h>
 
 #include <dt-bindings/power/mt2701-power.h>
+#include <dt-bindings/power/mt6797-power.h>
 #include <dt-bindings/power/mt8173-power.h>
 
 #define SPM_VDE_PWR_CON			0x0210
@@ -71,6 +72,7 @@ enum clk_id {
 	CLK_VENC,
 	CLK_VENC_LT,
 	CLK_ETHIF,
+	CLK_VDEC,
 	CLK_MAX,
 };
 
@@ -81,6 +83,7 @@ static const char * const clk_names[] = {
 	"venc",
 	"venc_lt",
 	"ethif",
+	"vdec",
 	NULL,
 };
 
@@ -107,21 +110,28 @@ struct scp_domain {
 	struct regulator *supply;
 };
 
+struct scp_ctrl_reg {
+	int pwr_sta_offs;
+	int pwr_sta2nd_offs;
+};
+
 struct scp {
 	struct scp_domain *domains;
 	struct genpd_onecell_data pd_data;
 	struct device *dev;
 	void __iomem *base;
 	struct regmap *infracfg;
+	struct scp_ctrl_reg ctrl_reg;
 };
 
 static int scpsys_domain_is_on(struct scp_domain *scpd)
 {
 	struct scp *scp = scpd->scp;
 
-	u32 status = readl(scp->base + SPM_PWR_STATUS) & scpd->data->sta_mask;
-	u32 status2 = readl(scp->base + SPM_PWR_STATUS_2ND) &
-				scpd->data->sta_mask;
+	u32 status = readl(scp->base + scp->ctrl_reg.pwr_sta_offs) &
+						scpd->data->sta_mask;
+	u32 status2 = readl(scp->base + scp->ctrl_reg.pwr_sta2nd_offs) &
+						scpd->data->sta_mask;
 
 	/*
 	 * A domain is on when both status bits are set. If only one is set
@@ -346,7 +356,8 @@ static void init_clks(struct platform_device *pdev, struct clk **clk)
 }
 
 static struct scp *init_scp(struct platform_device *pdev,
-			const struct scp_domain_data *scp_domain_data, int num)
+			const struct scp_domain_data *scp_domain_data, int num,
+			struct scp_ctrl_reg *scp_ctrl_reg)
 {
 	struct genpd_onecell_data *pd_data;
 	struct resource *res;
@@ -358,6 +369,9 @@ static struct scp *init_scp(struct platform_device *pdev,
 	if (!scp)
 		return ERR_PTR(-ENOMEM);
 
+	scp->ctrl_reg.pwr_sta_offs = scp_ctrl_reg->pwr_sta_offs;
+	scp->ctrl_reg.pwr_sta2nd_offs = scp_ctrl_reg->pwr_sta2nd_offs;
+
 	scp->dev = &pdev->dev;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -556,8 +570,13 @@ static const struct scp_domain_data scp_domain_data_mt2701[] = {
 static int __init scpsys_probe_mt2701(struct platform_device *pdev)
 {
 	struct scp *scp;
+	struct scp_ctrl_reg scp_reg;
 
-	scp = init_scp(pdev, scp_domain_data_mt2701, NUM_DOMAINS_MT2701);
+	scp_reg.pwr_sta_offs = SPM_PWR_STATUS;
+	scp_reg.pwr_sta2nd_offs = SPM_PWR_STATUS_2ND;
+
+	scp = init_scp(pdev, scp_domain_data_mt2701, NUM_DOMAINS_MT2701,
+		       &scp_reg);
 	if (IS_ERR(scp))
 		return PTR_ERR(scp);
 
@@ -566,6 +585,116 @@ static int __init scpsys_probe_mt2701(struct platform_device *pdev)
 	return 0;
 }
 
+/*
+ * MT6797 power domain support
+ */
+
+static const struct scp_domain_data scp_domain_data_mt6797[] = {
+	[MT6797_POWER_DOMAIN_VDEC] = {
+		.name = "vdec",
+		.sta_mask = BIT(7),
+		.ctl_offs = 0x300,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(12, 12),
+		.clk_id = {CLK_VDEC},
+	},
+	[MT6797_POWER_DOMAIN_VENC] = {
+		.name = "venc",
+		.sta_mask = BIT(21),
+		.ctl_offs = 0x304,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(15, 12),
+		.clk_id = {CLK_NONE},
+	},
+	[MT6797_POWER_DOMAIN_ISP] = {
+		.name = "isp",
+		.sta_mask = BIT(5),
+		.ctl_offs = 0x308,
+		.sram_pdn_bits = GENMASK(9, 8),
+		.sram_pdn_ack_bits = GENMASK(13, 12),
+		.clk_id = {CLK_NONE},
+	},
+	[MT6797_POWER_DOMAIN_MM] = {
+		.name = "mm",
+		.sta_mask = BIT(3),
+		.ctl_offs = 0x30C,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(12, 12),
+		.clk_id = {CLK_MM},
+		.bus_prot_mask = (BIT(1) | BIT(2)),
+	},
+	[MT6797_POWER_DOMAIN_AUDIO] = {
+		.name = "audio",
+		.sta_mask = BIT(24),
+		.ctl_offs = 0x314,
+		.sram_pdn_bits = GENMASK(11, 8),
+		.sram_pdn_ack_bits = GENMASK(15, 12),
+		.clk_id = {CLK_NONE},
+	},
+	[MT6797_POWER_DOMAIN_MFG_ASYNC] = {
+		.name = "mfg_async",
+		.sta_mask = BIT(13),
+		.ctl_offs = 0x334,
+		.sram_pdn_bits = 0,
+		.sram_pdn_ack_bits = 0,
+		.clk_id = {CLK_MFG},
+	},
+	[MT6797_POWER_DOMAIN_MJC] = {
+		.name = "mjc",
+		.sta_mask = BIT(20),
+		.ctl_offs = 0x310,
+		.sram_pdn_bits = GENMASK(8, 8),
+		.sram_pdn_ack_bits = GENMASK(12, 12),
+		.clk_id = {CLK_NONE},
+	},
+};
+
+#define NUM_DOMAINS_MT6797	ARRAY_SIZE(scp_domain_data_mt6797)
+#define SPM_PWR_STATUS_MT6797		0x0180
+#define SPM_PWR_STATUS_2ND_MT6797	0x0184
+
+static int __init scpsys_probe_mt6797(struct platform_device *pdev)
+{
+	struct scp *scp;
+	struct genpd_onecell_data *pd_data;
+	int ret;
+	struct scp_ctrl_reg scp_reg;
+
+	scp_reg.pwr_sta_offs = SPM_PWR_STATUS_MT6797;
+	scp_reg.pwr_sta2nd_offs = SPM_PWR_STATUS_2ND_MT6797;
+
+	scp = init_scp(pdev, scp_domain_data_mt6797, NUM_DOMAINS_MT6797,
+		       &scp_reg);
+	if (IS_ERR(scp))
+		return PTR_ERR(scp);
+
+	mtk_register_power_domains(pdev, scp, NUM_DOMAINS_MT6797);
+
+	pd_data = &scp->pd_data;
+
+	ret = pm_genpd_add_subdomain(pd_data->domains[MT6797_POWER_DOMAIN_MM],
+				     pd_data->domains[MT6797_POWER_DOMAIN_VDEC]);
+	if (ret && IS_ENABLED(CONFIG_PM))
+		dev_err(&pdev->dev, "Failed to add subdomain: %d\n", ret);
+
+	ret = pm_genpd_add_subdomain(pd_data->domains[MT6797_POWER_DOMAIN_MM],
+				     pd_data->domains[MT6797_POWER_DOMAIN_ISP]);
+	if (ret && IS_ENABLED(CONFIG_PM))
+		dev_err(&pdev->dev, "Failed to add subdomain: %d\n", ret);
+
+	ret = pm_genpd_add_subdomain(pd_data->domains[MT6797_POWER_DOMAIN_MM],
+				     pd_data->domains[MT6797_POWER_DOMAIN_VENC]);
+	if (ret && IS_ENABLED(CONFIG_PM))
+		dev_err(&pdev->dev, "Failed to add subdomain: %d\n", ret);
+
+	ret = pm_genpd_add_subdomain(pd_data->domains[MT6797_POWER_DOMAIN_MM],
+				     pd_data->domains[MT6797_POWER_DOMAIN_MJC]);
+	if (ret && IS_ENABLED(CONFIG_PM))
+		dev_err(&pdev->dev, "Failed to add subdomain: %d\n", ret);
+
+	return 0;
+}
+
 /*
  * MT8173 power domain support
  */
@@ -667,8 +796,13 @@ static int __init scpsys_probe_mt8173(struct platform_device *pdev)
 	struct scp *scp;
 	struct genpd_onecell_data *pd_data;
 	int ret;
+	struct scp_ctrl_reg scp_reg;
 
-	scp = init_scp(pdev, scp_domain_data_mt8173, NUM_DOMAINS_MT8173);
+	scp_reg.pwr_sta_offs = SPM_PWR_STATUS;
+	scp_reg.pwr_sta2nd_offs = SPM_PWR_STATUS_2ND;
+
+	scp = init_scp(pdev, scp_domain_data_mt8173, NUM_DOMAINS_MT8173,
+		       &scp_reg);
 	if (IS_ERR(scp))
 		return PTR_ERR(scp);
 
@@ -697,6 +831,9 @@ static const struct of_device_id of_scpsys_match_tbl[] = {
 	{
 		.compatible = "mediatek,mt2701-scpsys",
 		.data = scpsys_probe_mt2701,
+	}, {
+		.compatible = "mediatek,mt6797-scpsys",
+		.data = scpsys_probe_mt6797,
 	}, {
 		.compatible = "mediatek,mt8173-scpsys",
 		.data = scpsys_probe_mt8173,

drivers/soc/qcom/smsm.c

@@ -439,14 +439,15 @@ static int smsm_get_size_info(struct qcom_smsm *smsm)
 	} *info;
 
 	info = qcom_smem_get(QCOM_SMEM_HOST_ANY, SMEM_SMSM_SIZE_INFO, &size);
-	if (PTR_ERR(info) == -ENOENT || size != sizeof(*info)) {
+	if (IS_ERR(info) && PTR_ERR(info) != -ENOENT) {
+		if (PTR_ERR(info) != -EPROBE_DEFER)
+			dev_err(smsm->dev, "unable to retrieve smsm size info\n");
+		return PTR_ERR(info);
+	} else if (IS_ERR(info) || size != sizeof(*info)) {
 		dev_warn(smsm->dev, "no smsm size info, using defaults\n");
 		smsm->num_entries = SMSM_DEFAULT_NUM_ENTRIES;
 		smsm->num_hosts = SMSM_DEFAULT_NUM_HOSTS;
 		return 0;
-	} else if (IS_ERR(info)) {
-		dev_err(smsm->dev, "unable to retrieve smsm size info\n");
-		return PTR_ERR(info);
 	}
 
 	smsm->num_entries = info->num_entries;

drivers/soc/renesas/Kconfig

+config SOC_RENESAS
+	bool "Renesas SoC driver support" if COMPILE_TEST && !ARCH_RENESAS
+	default y if ARCH_RENESAS
+	select SOC_BUS
+	select RST_RCAR if ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2 || \
+			   ARCH_R8A7795 || ARCH_R8A7796
+	select SYSC_R8A7743 if ARCH_R8A7743
+	select SYSC_R8A7745 if ARCH_R8A7745
+	select SYSC_R8A7779 if ARCH_R8A7779
+	select SYSC_R8A7790 if ARCH_R8A7790
+	select SYSC_R8A7791 if ARCH_R8A7791 || ARCH_R8A7793
+	select SYSC_R8A7792 if ARCH_R8A7792
+	select SYSC_R8A7794 if ARCH_R8A7794
+	select SYSC_R8A7795 if ARCH_R8A7795
+	select SYSC_R8A7796 if ARCH_R8A7796
+
+if SOC_RENESAS
+
+# SoC
+config SYSC_R8A7743
+	bool "RZ/G1M System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A7745
+	bool "RZ/G1E System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A7779
+	bool "R-Car H1 System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A7790
+	bool "R-Car H2 System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A7791
+	bool "R-Car M2-W/N System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A7792
+	bool "R-Car V2H System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A7794
+	bool "R-Car E2 System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A7795
+	bool "R-Car H3 System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
+config SYSC_R8A7796
+	bool "R-Car M3-W System Controller support" if COMPILE_TEST
+	select SYSC_RCAR
+
+# Family
+config RST_RCAR
+	bool "R-Car Reset Controller support" if COMPILE_TEST
+
+config SYSC_RCAR
+	bool "R-Car System Controller support" if COMPILE_TEST
+
+endif # SOC_RENESAS

drivers/soc/renesas/Makefile

-obj-$(CONFIG_SOC_BUS)		+= renesas-soc.o
+# Generic, must be first because of soc_device_register()
+obj-$(CONFIG_SOC_RENESAS)	+= renesas-soc.o
 
-obj-$(CONFIG_ARCH_RCAR_GEN1)	+= rcar-rst.o
-obj-$(CONFIG_ARCH_RCAR_GEN2)	+= rcar-rst.o
-obj-$(CONFIG_ARCH_R8A7795)	+= rcar-rst.o
-obj-$(CONFIG_ARCH_R8A7796)	+= rcar-rst.o
+# SoC
+obj-$(CONFIG_SYSC_R8A7743)	+= r8a7743-sysc.o
+obj-$(CONFIG_SYSC_R8A7745)	+= r8a7745-sysc.o
+obj-$(CONFIG_SYSC_R8A7779)	+= r8a7779-sysc.o
+obj-$(CONFIG_SYSC_R8A7790)	+= r8a7790-sysc.o
+obj-$(CONFIG_SYSC_R8A7791)	+= r8a7791-sysc.o
+obj-$(CONFIG_SYSC_R8A7792)	+= r8a7792-sysc.o
+obj-$(CONFIG_SYSC_R8A7794)	+= r8a7794-sysc.o
+obj-$(CONFIG_SYSC_R8A7795)	+= r8a7795-sysc.o
+obj-$(CONFIG_SYSC_R8A7796)	+= r8a7796-sysc.o
 
-obj-$(CONFIG_ARCH_R8A7743)	+= rcar-sysc.o r8a7743-sysc.o
-obj-$(CONFIG_ARCH_R8A7745)	+= rcar-sysc.o r8a7745-sysc.o
-obj-$(CONFIG_ARCH_R8A7779)	+= rcar-sysc.o r8a7779-sysc.o
-obj-$(CONFIG_ARCH_R8A7790)	+= rcar-sysc.o r8a7790-sysc.o
-obj-$(CONFIG_ARCH_R8A7791)	+= rcar-sysc.o r8a7791-sysc.o
-obj-$(CONFIG_ARCH_R8A7792)	+= rcar-sysc.o r8a7792-sysc.o
-# R-Car M2-N is identical to R-Car M2-W w.r.t. power domains.
-obj-$(CONFIG_ARCH_R8A7793)	+= rcar-sysc.o r8a7791-sysc.o
-obj-$(CONFIG_ARCH_R8A7794)	+= rcar-sysc.o r8a7794-sysc.o
-obj-$(CONFIG_ARCH_R8A7795)	+= rcar-sysc.o r8a7795-sysc.o
-obj-$(CONFIG_ARCH_R8A7796)	+= rcar-sysc.o r8a7796-sysc.o
+# Family
+obj-$(CONFIG_RST_RCAR)		+= rcar-rst.o
+obj-$(CONFIG_SYSC_RCAR)		+= rcar-sysc.o

drivers/soc/renesas/rcar-sysc.c

@@ -181,17 +181,6 @@ static int rcar_sysc_pd_power_off(struct generic_pm_domain *genpd)
 	struct rcar_sysc_pd *pd = to_rcar_pd(genpd);
 
 	pr_debug("%s: %s\n", __func__, genpd->name);
-
-	if (pd->flags & PD_NO_CR) {
-		pr_debug("%s: Cannot control %s\n", __func__, genpd->name);
-		return -EBUSY;
-	}
-
-	if (pd->flags & PD_BUSY) {
-		pr_debug("%s: %s busy\n", __func__, genpd->name);
-		return -EBUSY;
-	}
-
 	return rcar_sysc_power_down(&pd->ch);
 }
 
@@ -200,12 +189,6 @@ static int rcar_sysc_pd_power_on(struct generic_pm_domain *genpd)
 	struct rcar_sysc_pd *pd = to_rcar_pd(genpd);
 
 	pr_debug("%s: %s\n", __func__, genpd->name);
-
-	if (pd->flags & PD_NO_CR) {
-		pr_debug("%s: Cannot control %s\n", __func__, genpd->name);
-		return 0;
-	}
-
 	return rcar_sysc_power_up(&pd->ch);
 }
 
@@ -223,8 +206,7 @@ static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd)
 		 * only be turned off if the CPU is not in use.
 		 */
 		pr_debug("PM domain %s contains %s\n", name, "CPU");
-		pd->flags |= PD_BUSY;
-		gov = &pm_domain_always_on_gov;
+		genpd->flags |= GENPD_FLAG_ALWAYS_ON;
 	} else if (pd->flags & PD_SCU) {
 		/*
 		 * This domain contains an SCU and cache-controller, and
@@ -232,19 +214,17 @@ static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd)
 		 * not in use.
 		 */
 		pr_debug("PM domain %s contains %s\n", name, "SCU");
-		pd->flags |= PD_BUSY;
-		gov = &pm_domain_always_on_gov;
+		genpd->flags |= GENPD_FLAG_ALWAYS_ON;
 	} else if (pd->flags & PD_NO_CR) {
 		/*
 		 * This domain cannot be turned off.
 		 */
-		pd->flags |= PD_BUSY;
-		gov = &pm_domain_always_on_gov;
+		genpd->flags |= GENPD_FLAG_ALWAYS_ON;
 	}
 
 	if (!(pd->flags & (PD_CPU | PD_SCU))) {
 		/* Enable Clock Domain for I/O devices */
-		genpd->flags = GENPD_FLAG_PM_CLK;
+		genpd->flags |= GENPD_FLAG_PM_CLK;
 		if (has_cpg_mstp) {
 			genpd->attach_dev = cpg_mstp_attach_dev;
 			genpd->detach_dev = cpg_mstp_detach_dev;
@@ -275,35 +255,33 @@ static void __init rcar_sysc_pd_setup(struct rcar_sysc_pd *pd)
 }
 
 static const struct of_device_id rcar_sysc_matches[] = {
-#ifdef CONFIG_ARCH_R8A7743
+#ifdef CONFIG_SYSC_R8A7743
 	{ .compatible = "renesas,r8a7743-sysc", .data = &r8a7743_sysc_info },
 #endif
-#ifdef CONFIG_ARCH_R8A7745
+#ifdef CONFIG_SYSC_R8A7745
 	{ .compatible = "renesas,r8a7745-sysc", .data = &r8a7745_sysc_info },
 #endif
-#ifdef CONFIG_ARCH_R8A7779
+#ifdef CONFIG_SYSC_R8A7779
 	{ .compatible = "renesas,r8a7779-sysc", .data = &r8a7779_sysc_info },
 #endif
-#ifdef CONFIG_ARCH_R8A7790
+#ifdef CONFIG_SYSC_R8A7790
 	{ .compatible = "renesas,r8a7790-sysc", .data = &r8a7790_sysc_info },
 #endif
-#ifdef CONFIG_ARCH_R8A7791
+#ifdef CONFIG_SYSC_R8A7791
 	{ .compatible = "renesas,r8a7791-sysc", .data = &r8a7791_sysc_info },
-#endif
-#ifdef CONFIG_ARCH_R8A7792
-	{ .compatible = "renesas,r8a7792-sysc", .data = &r8a7792_sysc_info },
-#endif
-#ifdef CONFIG_ARCH_R8A7793
 	/* R-Car M2-N is identical to R-Car M2-W w.r.t. power domains. */
 	{ .compatible = "renesas,r8a7793-sysc", .data = &r8a7791_sysc_info },
 #endif
-#ifdef CONFIG_ARCH_R8A7794
+#ifdef CONFIG_SYSC_R8A7792
+	{ .compatible = "renesas,r8a7792-sysc", .data = &r8a7792_sysc_info },
+#endif
+#ifdef CONFIG_SYSC_R8A7794
 	{ .compatible = "renesas,r8a7794-sysc", .data = &r8a7794_sysc_info },
 #endif
-#ifdef CONFIG_ARCH_R8A7795
+#ifdef CONFIG_SYSC_R8A7795
 	{ .compatible = "renesas,r8a7795-sysc", .data = &r8a7795_sysc_info },
 #endif
-#ifdef CONFIG_ARCH_R8A7796
+#ifdef CONFIG_SYSC_R8A7796
 	{ .compatible = "renesas,r8a7796-sysc", .data = &r8a7796_sysc_info },
 #endif
 	{ /* sentinel */ }

drivers/soc/renesas/rcar-sysc.h

@@ -20,8 +20,6 @@
 #define PD_SCU		BIT(1)	/* Area contains SCU and L2 cache */
 #define PD_NO_CR	BIT(2)	/* Area lacks PWR{ON,OFF}CR registers */
 
-#define PD_BUSY		BIT(3)	/* Busy, for internal use only */
-
 #define PD_CPU_CR	PD_CPU		  /* CPU area has CR (R-Car H1) */
 #define PD_CPU_NOCR	PD_CPU | PD_NO_CR /* CPU area lacks CR (R-Car Gen2/3) */
 #define PD_ALWAYS_ON	PD_NO_CR	  /* Always-on area */

drivers/soc/tegra/Kconfig

@@ -115,3 +115,8 @@ config SOC_TEGRA_PMC
 
 config SOC_TEGRA_PMC_TEGRA186
 	bool
+
+config SOC_TEGRA_POWERGATE_BPMP
+	def_bool y
+	depends on PM_GENERIC_DOMAINS
+	depends on TEGRA_BPMP

drivers/soc/tegra/Makefile

@@ -4,3 +4,4 @@ obj-y += common.o
 obj-$(CONFIG_SOC_TEGRA_FLOWCTRL) += flowctrl.o
 obj-$(CONFIG_SOC_TEGRA_PMC) += pmc.o
 obj-$(CONFIG_SOC_TEGRA_PMC_TEGRA186) += pmc-tegra186.o
+obj-$(CONFIG_SOC_TEGRA_POWERGATE_BPMP) += powergate-bpmp.o

drivers/soc/tegra/flowctrl.c

@@ -157,7 +157,7 @@ static int tegra_flowctrl_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	tegra_flowctrl_base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(tegra_flowctrl_base))
-		return PTR_ERR(base);
+		return PTR_ERR(tegra_flowctrl_base);
 
 	iounmap(base);
 

drivers/soc/tegra/powergate-bpmp.c

+/*
+ * Copyright (c) 2016-2017, NVIDIA CORPORATION. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/slab.h>
+#include <linux/version.h>
+
+#include <soc/tegra/bpmp.h>
+#include <soc/tegra/bpmp-abi.h>
+
+struct tegra_powergate_info {
+	unsigned int id;
+	char *name;
+};
+
+struct tegra_powergate {
+	struct generic_pm_domain genpd;
+	struct tegra_bpmp *bpmp;
+	unsigned int id;
+};
+
+static inline struct tegra_powergate *
+to_tegra_powergate(struct generic_pm_domain *genpd)
+{
+	return container_of(genpd, struct tegra_powergate, genpd);
+}
+
+static int tegra_bpmp_powergate_set_state(struct tegra_bpmp *bpmp,
+					  unsigned int id, u32 state)
+{
+	struct mrq_pg_request request;
+	struct tegra_bpmp_message msg;
+
+	memset(&request, 0, sizeof(request));
+	request.cmd = CMD_PG_SET_STATE;
+	request.id = id;
+	request.set_state.state = state;
+
+	memset(&msg, 0, sizeof(msg));
+	msg.mrq = MRQ_PG;
+	msg.tx.data = &request;
+	msg.tx.size = sizeof(request);
+
+	return tegra_bpmp_transfer(bpmp, &msg);
+}
+
+static int tegra_bpmp_powergate_get_state(struct tegra_bpmp *bpmp,
+					  unsigned int id)
+{
+	struct mrq_pg_response response;
+	struct mrq_pg_request request;
+	struct tegra_bpmp_message msg;
+	int err;
+
+	memset(&request, 0, sizeof(request));
+	request.cmd = CMD_PG_GET_STATE;
+	request.id = id;
+
+	memset(&response, 0, sizeof(response));
+
+	memset(&msg, 0, sizeof(msg));
+	msg.mrq = MRQ_PG;
+	msg.tx.data = &request;
+	msg.tx.size = sizeof(request);
+	msg.rx.data = &response;
+	msg.rx.size = sizeof(response);
+
+	err = tegra_bpmp_transfer(bpmp, &msg);
+	if (err < 0)
+		return PG_STATE_OFF;
+
+	return response.get_state.state;
+}
+
+static int tegra_bpmp_powergate_get_max_id(struct tegra_bpmp *bpmp)
+{
+	struct mrq_pg_response response;
+	struct mrq_pg_request request;
+	struct tegra_bpmp_message msg;
+	int err;
+
+	memset(&request, 0, sizeof(request));
+	request.cmd = CMD_PG_GET_MAX_ID;
+
+	memset(&response, 0, sizeof(response));
+
+	memset(&msg, 0, sizeof(msg));
+	msg.mrq = MRQ_PG;
+	msg.tx.data = &request;
+	msg.tx.size = sizeof(request);
+	msg.rx.data = &response;
+	msg.rx.size = sizeof(response);
+
+	err = tegra_bpmp_transfer(bpmp, &msg);
+	if (err < 0)
+		return err;
+
+	return response.get_max_id.max_id;
+}
+
+static char *tegra_bpmp_powergate_get_name(struct tegra_bpmp *bpmp,
+					   unsigned int id)
+{
+	struct mrq_pg_response response;
+	struct mrq_pg_request request;
+	struct tegra_bpmp_message msg;
+	int err;
+
+	memset(&request, 0, sizeof(request));
+	request.cmd = CMD_PG_GET_NAME;
+	request.id = id;
+
+	memset(&response, 0, sizeof(response));
+
+	memset(&msg, 0, sizeof(msg));
+	msg.mrq = MRQ_PG;
+	msg.tx.data = &request;
+	msg.tx.size = sizeof(request);
+	msg.rx.data = &response;
+	msg.rx.size = sizeof(response);
+
+	err = tegra_bpmp_transfer(bpmp, &msg);
+	if (err < 0)
+		return NULL;
+
+	return kstrdup(response.get_name.name, GFP_KERNEL);
+}
+
+static inline bool tegra_bpmp_powergate_is_powered(struct tegra_bpmp *bpmp,
+						   unsigned int id)
+{
+	return tegra_bpmp_powergate_get_state(bpmp, id) != PG_STATE_OFF;
+}
+
+static int tegra_powergate_power_on(struct generic_pm_domain *domain)
+{
+	struct tegra_powergate *powergate = to_tegra_powergate(domain);
+	struct tegra_bpmp *bpmp = powergate->bpmp;
+
+	return tegra_bpmp_powergate_set_state(bpmp, powergate->id,
+					      PG_STATE_ON);
+}
+
+static int tegra_powergate_power_off(struct generic_pm_domain *domain)
+{
+	struct tegra_powergate *powergate = to_tegra_powergate(domain);
+	struct tegra_bpmp *bpmp = powergate->bpmp;
+
+	return tegra_bpmp_powergate_set_state(bpmp, powergate->id,
+					      PG_STATE_OFF);
+}
+
+static struct tegra_powergate *
+tegra_powergate_add(struct tegra_bpmp *bpmp,
+		    const struct tegra_powergate_info *info)
+{
+	struct tegra_powergate *powergate;
+	bool off;
+	int err;
+
+	off = !tegra_bpmp_powergate_is_powered(bpmp, info->id);
+
+	powergate = devm_kzalloc(bpmp->dev, sizeof(*powergate), GFP_KERNEL);
+	if (!powergate)
+		return ERR_PTR(-ENOMEM);
+
+	powergate->id = info->id;
+	powergate->bpmp = bpmp;
+
+	powergate->genpd.name = kstrdup(info->name, GFP_KERNEL);
+	powergate->genpd.power_on = tegra_powergate_power_on;
+	powergate->genpd.power_off = tegra_powergate_power_off;
+
+	err = pm_genpd_init(&powergate->genpd, NULL, off);
+	if (err < 0) {
+		kfree(powergate->genpd.name);
+		return ERR_PTR(err);
+	}
+
+	return powergate;
+}
+
+static void tegra_powergate_remove(struct tegra_powergate *powergate)
+{
+	struct generic_pm_domain *genpd = &powergate->genpd;
+	struct tegra_bpmp *bpmp = powergate->bpmp;
+	int err;
+
+	err = pm_genpd_remove(genpd);
+	if (err < 0)
+		dev_err(bpmp->dev, "failed to remove power domain %s: %d\n",
+			genpd->name, err);
+
+	kfree(genpd->name);
+}
+
+static int
+tegra_bpmp_probe_powergates(struct tegra_bpmp *bpmp,
+			    struct tegra_powergate_info **powergatesp)
+{
+	struct tegra_powergate_info *powergates;
+	unsigned int max_id, id, count = 0;
+	unsigned int num_holes = 0;
+	int err;
+
+	err = tegra_bpmp_powergate_get_max_id(bpmp);
+	if (err < 0)
+		return err;
+
+	max_id = err;
+
+	dev_dbg(bpmp->dev, "maximum powergate ID: %u\n", max_id);
+
+	powergates = kcalloc(max_id + 1, sizeof(*powergates), GFP_KERNEL);
+	if (!powergates)
+		return -ENOMEM;
+
+	for (id = 0; id <= max_id; id++) {
+		struct tegra_powergate_info *info = &powergates[count];
+
+		info->name = tegra_bpmp_powergate_get_name(bpmp, id);
+		if (!info->name || info->name[0] == '\0') {
+			num_holes++;
+			continue;
+		}
+
+		info->id = id;
+		count++;
+	}
+
+	dev_dbg(bpmp->dev, "holes: %u\n", num_holes);
+
+	*powergatesp = powergates;
+
+	return count;
+}
+
+static int tegra_bpmp_add_powergates(struct tegra_bpmp *bpmp,
+				     struct tegra_powergate_info *powergates,
+				     unsigned int count)
+{
+	struct genpd_onecell_data *genpd = &bpmp->genpd;
+	struct generic_pm_domain **domains;
+	struct tegra_powergate *powergate;
+	unsigned int i;
+	int err;
+
+	domains = kcalloc(count, sizeof(*domains), GFP_KERNEL);
+	if (!domains)
+		return -ENOMEM;
+
+	for (i = 0; i < count; i++) {
+		powergate = tegra_powergate_add(bpmp, &powergates[i]);
+		if (IS_ERR(powergate)) {
+			err = PTR_ERR(powergate);
+			goto remove;
+		}
+
+		dev_dbg(bpmp->dev, "added power domain %s\n",
+			powergate->genpd.name);
+		domains[i] = &powergate->genpd;
+	}
+
+	genpd->num_domains = count;
+	genpd->domains = domains;
+
+	return 0;
+
+remove:
+	while (i--) {
+		powergate = to_tegra_powergate(domains[i]);
+		tegra_powergate_remove(powergate);
+	}
+
+	kfree(genpd->domains);
+	return err;
+}
+
+static void tegra_bpmp_remove_powergates(struct tegra_bpmp *bpmp)
+{
+	struct genpd_onecell_data *genpd = &bpmp->genpd;
+	unsigned int i = genpd->num_domains;
+	struct tegra_powergate *powergate;
+
+	while (i--) {
+		dev_dbg(bpmp->dev, "removing power domain %s\n",
+			genpd->domains[i]->name);
+		powergate = to_tegra_powergate(genpd->domains[i]);
+		tegra_powergate_remove(powergate);
+	}
+}
+
+static struct generic_pm_domain *
+tegra_powergate_xlate(struct of_phandle_args *spec, void *data)
+{
+	struct generic_pm_domain *domain = ERR_PTR(-ENOENT);
+	struct genpd_onecell_data *genpd = data;
+	unsigned int i;
+
+	for (i = 0; i < genpd->num_domains; i++) {
+		struct tegra_powergate *powergate;
+
+		powergate = to_tegra_powergate(genpd->domains[i]);
+		if (powergate->id == spec->args[0]) {
+			domain = &powergate->genpd;
+			break;
+		}
+	}
+
+	return domain;
+}
+
+int tegra_bpmp_init_powergates(struct tegra_bpmp *bpmp)
+{
+	struct device_node *np = bpmp->dev->of_node;
+	struct tegra_powergate_info *powergates;
+	struct device *dev = bpmp->dev;
+	unsigned int count, i;
+	int err;
+
+	err = tegra_bpmp_probe_powergates(bpmp, &powergates);
+	if (err < 0)
+		return err;
+
+	count = err;
+
+	dev_dbg(dev, "%u power domains probed\n", count);
+
+	err = tegra_bpmp_add_powergates(bpmp, powergates, count);
+	if (err < 0)
+		goto free;
+
+	bpmp->genpd.xlate = tegra_powergate_xlate;
+
+	err = of_genpd_add_provider_onecell(np, &bpmp->genpd);
+	if (err < 0) {
+		dev_err(dev, "failed to add power domain provider: %d\n", err);
+		tegra_bpmp_remove_powergates(bpmp);
+	}
+
+free:
+	for (i = 0; i < count; i++)
+		kfree(powergates[i].name);
+
+	kfree(powergates);
+	return err;
+}

include/dt-bindings/power/mt6797-power.h

+/*
+ * Copyright (c) 2017 MediaTek Inc.
+ * Author: Mars.C <mars.cheng@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_POWER_MT6797_POWER_H
+#define _DT_BINDINGS_POWER_MT6797_POWER_H
+
+#define MT6797_POWER_DOMAIN_VDEC		0
+#define MT6797_POWER_DOMAIN_VENC		1
+#define MT6797_POWER_DOMAIN_ISP		2
+#define MT6797_POWER_DOMAIN_MM			3
+#define MT6797_POWER_DOMAIN_AUDIO		4
+#define MT6797_POWER_DOMAIN_MFG_ASYNC		5
+#define MT6797_POWER_DOMAIN_MFG		6
+#define MT6797_POWER_DOMAIN_MFG_CORE0		7
+#define MT6797_POWER_DOMAIN_MFG_CORE1		8
+#define MT6797_POWER_DOMAIN_MFG_CORE2		9
+#define MT6797_POWER_DOMAIN_MFG_CORE3		10
+#define MT6797_POWER_DOMAIN_MJC		11
+
+#endif /* _DT_BINDINGS_POWER_MT6797_POWER_H */

include/dt-bindings/reset/altr,rst-mgr-s10.h

+/*
+ * Copyright (C) 2016 Intel Corporation. All rights reserved
+ * Copyright (C) 2016 Altera Corporation. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * derived from Steffen Trumtrar's "altr,rst-mgr-a10.h"
+ */
+
+#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_S10_H
+#define _DT_BINDINGS_RESET_ALTR_RST_MGR_S10_H
+
+/* MPUMODRST */
+#define CPU0_RESET		0
+#define CPU1_RESET		1
+#define CPU2_RESET		2
+#define CPU3_RESET		3
+
+/* PER0MODRST */
+#define EMAC0_RESET		32
+#define EMAC1_RESET		33
+#define EMAC2_RESET		34
+#define USB0_RESET		35
+#define USB1_RESET		36
+#define NAND_RESET		37
+/* 38 is empty */
+#define SDMMC_RESET		39
+#define EMAC0_OCP_RESET		40
+#define EMAC1_OCP_RESET		41
+#define EMAC2_OCP_RESET		42
+#define USB0_OCP_RESET		43
+#define USB1_OCP_RESET		44
+#define NAND_OCP_RESET		45
+/* 46 is empty */
+#define SDMMC_OCP_RESET		47
+#define DMA_RESET		48
+#define SPIM0_RESET		49
+#define SPIM1_RESET		50
+#define SPIS0_RESET		51
+#define SPIS1_RESET		52
+#define DMA_OCP_RESET		53
+#define EMAC_PTP_RESET		54
+/* 55 is empty*/
+#define DMAIF0_RESET		56
+#define DMAIF1_RESET		57
+#define DMAIF2_RESET		58
+#define DMAIF3_RESET		59
+#define DMAIF4_RESET		60
+#define DMAIF5_RESET		61
+#define DMAIF6_RESET		62
+#define DMAIF7_RESET		63
+
+/* PER1MODRST */
+#define WATCHDOG0_RESET		64
+#define WATCHDOG1_RESET		65
+#define WATCHDOG2_RESET		66
+#define WATCHDOG3_RESET		67
+#define L4SYSTIMER0_RESET	68
+#define L4SYSTIMER1_RESET	69
+#define SPTIMER0_RESET		70
+#define SPTIMER1_RESET		71
+#define I2C0_RESET		72
+#define I2C1_RESET		73
+#define I2C2_RESET		74
+#define I2C3_RESET		75
+#define I2C4_RESET		76
+/* 77-79 is empty */
+#define UART0_RESET		80
+#define UART1_RESET		81
+/* 82-87 is empty */
+#define GPIO0_RESET		88
+#define GPIO1_RESET		89
+
+/* BRGMODRST */
+#define SOC2FPGA_RESET		96
+#define LWHPS2FPGA_RESET	97
+#define FPGA2SOC_RESET		98
+#define F2SSDRAM0_RESET		99
+#define F2SSDRAM1_RESET		100
+#define F2SSDRAM2_RESET		101
+#define DDRSCH_RESET		102
+
+/* COLDMODRST */
+#define CPUPO0_RESET		160
+#define CPUPO1_RESET		161
+#define CPUPO2_RESET		162
+#define CPUPO3_RESET		163
+/* 164-167 is empty */
+#define L2_RESET		168
+
+/* DBGMODRST */
+#define DBG_RESET		224
+#define CSDAP_RESET		225
+
+/* TAPMODRST */
+#define TAP_RESET		256
+
+#endif

include/dt-bindings/reset/cortina,gemini-reset.h

+#ifndef _DT_BINDINGS_RESET_CORTINA_GEMINI_H
+#define _DT_BINDINGS_RESET_CORTINA_GEMINI_H
+
+#define GEMINI_RESET_DRAM	0
+#define GEMINI_RESET_FLASH	1
+#define GEMINI_RESET_IDE	2
+#define GEMINI_RESET_RAID	3
+#define GEMINI_RESET_SECURITY	4
+#define GEMINI_RESET_GMAC0	5
+#define GEMINI_RESET_GMAC1	6
+#define GEMINI_RESET_PCI	7
+#define GEMINI_RESET_USB0	8
+#define GEMINI_RESET_USB1	9
+#define GEMINI_RESET_DMAC	10
+#define GEMINI_RESET_APB	11
+#define GEMINI_RESET_LPC	12
+#define GEMINI_RESET_LCD	13
+#define GEMINI_RESET_INTCON0	14
+#define GEMINI_RESET_INTCON1	15
+#define GEMINI_RESET_RTC	16
+#define GEMINI_RESET_TIMER	17
+#define GEMINI_RESET_UART	18
+#define GEMINI_RESET_SSP	19
+#define GEMINI_RESET_GPIO0	20
+#define GEMINI_RESET_GPIO1	21
+#define GEMINI_RESET_GPIO2	22
+#define GEMINI_RESET_WDOG	23
+#define GEMINI_RESET_EXTERN	24
+#define GEMINI_RESET_CIR	25
+#define GEMINI_RESET_SATA0	26
+#define GEMINI_RESET_SATA1	27
+#define GEMINI_RESET_TVC	28
+#define GEMINI_RESET_CPU1	30
+#define GEMINI_RESET_GLOBAL	31
+
+#endif

include/linux/pm_domain.h

@@ -206,9 +206,13 @@ static inline void pm_genpd_syscore_poweron(struct device *dev) {}
 /* OF PM domain providers */
 struct of_device_id;
 
+typedef struct generic_pm_domain *(*genpd_xlate_t)(struct of_phandle_args *args,
+						   void *data);
+
 struct genpd_onecell_data {
 	struct generic_pm_domain **domains;
 	unsigned int num_domains;
+	genpd_xlate_t xlate;
 };
 
 #ifdef CONFIG_PM_GENERIC_DOMAINS_OF

include/linux/scpi_protocol.h

@@ -67,6 +67,9 @@ struct scpi_ops {
 	int (*dvfs_get_idx)(u8);
 	int (*dvfs_set_idx)(u8, u8);
 	struct scpi_dvfs_info *(*dvfs_get_info)(u8);
+	int (*device_domain_id)(struct device *);
+	int (*get_transition_latency)(struct device *);
+	int (*add_opps_to_device)(struct device *);
 	int (*sensor_get_capability)(u16 *sensors);
 	int (*sensor_get_info)(u16 sensor_id, struct scpi_sensor_info *);
 	int (*sensor_get_value)(u16, u64 *);

include/linux/soc/renesas/rcar-rst.h

 #ifndef __LINUX_SOC_RENESAS_RCAR_RST_H__
 #define __LINUX_SOC_RENESAS_RCAR_RST_H__
 
-#if defined(CONFIG_ARCH_RCAR_GEN1) || defined(CONFIG_ARCH_RCAR_GEN2) || \
-    defined(CONFIG_ARCH_R8A7795) || defined(CONFIG_ARCH_R8A7796)
+#ifdef CONFIG_RST_RCAR
 int rcar_rst_read_mode_pins(u32 *mode);
 #else
 static inline int rcar_rst_read_mode_pins(u32 *mode) { return -ENODEV; }

include/soc/tegra/bpmp-abi.h

@@ -81,13 +81,18 @@
  * Provides the MRQ number for the MRQ message: #mrq. The remainder of
  * the MRQ message is a payload (immediately following the
  * mrq_request) whose format depends on mrq.
- *
- * @todo document the flags
  */
 struct mrq_request {
 	/** @brief MRQ number of the request */
 	uint32_t mrq;
-	/** @brief flags for the request */
+	/**
+	 * @brief flags providing follow up directions to the receiver
+	 *
+	 * | Bit | Description                                |
+	 * |-----|--------------------------------------------|
+	 * | 1   | ring the sender's doorbell when responding |
+	 * | 0   | should be 1                                |
+	 */
 	uint32_t flags;
 } __ABI_PACKED;
 
@@ -99,13 +104,11 @@ struct mrq_request {
  *  remainder of the MRQ response is a payload (immediately following
  *  the mrq_response) whose format depends on the associated
  *  mrq_request::mrq
- *
- * @todo document the flags
  */
 struct mrq_response {
 	/** @brief error code for the MRQ request itself */
 	int32_t err;
-	/** @brief flags for the response */
+	/** @brief reserved for future use */
 	uint32_t flags;
 } __ABI_PACKED;
 
@@ -147,6 +150,8 @@ struct mrq_response {
 #define MRQ_ABI_RATCHET		29
 #define MRQ_EMC_DVFS_LATENCY	31
 #define MRQ_TRACE_ITER		64
+#define MRQ_RINGBUF_CONSOLE	65
+#define MRQ_PG			66
 
 /** @} */
 
@@ -155,7 +160,7 @@ struct mrq_response {
  * @brief Maximum MRQ code to be sent by CPU software to
  * BPMP. Subject to change in future
  */
-#define MAX_CPU_MRQ_ID		64
+#define MAX_CPU_MRQ_ID		66
 
 /**
  * @addtogroup MRQ_Payloads Message Payloads
@@ -175,6 +180,7 @@ struct mrq_response {
  *   @defgroup Vhint CPU Voltage hint
  *   @defgroup MRQ_Deprecated Deprecated MRQ messages
  *   @defgroup EMC
+ *   @defgroup RingbufConsole
  * @}
  */
 
@@ -637,7 +643,7 @@ struct mrq_debugfs_response {
  * * Initiators: Any
  * * Targets: BPMP
  * * Request Payload: @ref mrq_reset_request
- * * Response Payload: N/A
+ * * Response Payload: @ref mrq_reset_response
  */
 
 /**
@@ -647,6 +653,7 @@ enum mrq_reset_commands {
 	CMD_RESET_ASSERT = 1,
 	CMD_RESET_DEASSERT = 2,
 	CMD_RESET_MODULE = 3,
+	CMD_RESET_GET_MAX_ID = 4,
 	CMD_RESET_MAX, /* not part of ABI and subject to change */
 };
 
@@ -664,6 +671,38 @@ struct mrq_reset_request {
 	uint32_t reset_id;
 } __ABI_PACKED;
 
+/**
+ * @ingroup Reset
+ * @brief Response for MRQ_RESET sub-command CMD_RESET_GET_MAX_ID. When
+ * this sub-command is not supported, firmware will return -BPMP_EBADCMD
+ * in mrq_response::err.
+ */
+struct cmd_reset_get_max_id_response {
+	/** @brief max reset id */
+	uint32_t max_id;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Reset
+ * @brief Response with MRQ_RESET
+ *
+ * Each sub-command supported by @ref mrq_reset_request may return
+ * sub-command-specific data. Some do and some do not as indicated
+ * in the following table
+ *
+ * | sub-command          | payload          |
+ * |----------------------|------------------|
+ * | CMD_RESET_ASSERT     | -                |
+ * | CMD_RESET_DEASSERT   | -                |
+ * | CMD_RESET_MODULE     | -                |
+ * | CMD_RESET_GET_MAX_ID | reset_get_max_id |
+ */
+struct mrq_reset_response {
+	union {
+		struct cmd_reset_get_max_id_response reset_get_max_id;
+	} __UNION_ANON;
+} __ABI_PACKED;
+
 /**
  * @ingroup MRQ_Codes
  * @def MRQ_I2C
@@ -812,6 +851,17 @@ enum {
 };
 /** @} */
 
+/**
+ * @name MRQ_CLK properties
+ * Flag bits for cmd_clk_properties_response::flags and
+ * cmd_clk_get_all_info_response::flags
+ * @{
+ */
+#define BPMP_CLK_HAS_MUX	(1 << 0)
+#define BPMP_CLK_HAS_SET_RATE	(1 << 1)
+#define BPMP_CLK_IS_ROOT	(1 << 2)
+/** @} */
+
 #define MRQ_CLK_NAME_MAXLEN	40
 #define MRQ_CLK_MAX_PARENTS	16
 
@@ -1010,7 +1060,7 @@ struct mrq_clk_response {
  *
  * * Platforms: All
  * * Initiators: Any
- * * Targets: Any
+ * * Targets: Any except DMCE
  * * Request Payload: @ref mrq_query_abi_request
  * * Response Payload: @ref mrq_query_abi_response
  */
@@ -1030,6 +1080,9 @@ struct mrq_query_abi_request {
 /**
  * @ingroup ABI_info
  * @brief response to MRQ_QUERY_ABI
+ *
+ * @note mrq_response::err of 0 indicates that the query was
+ * successful, not that the MRQ itself is supported!
  */
 struct mrq_query_abi_response {
 	/** @brief 0 if queried MRQ is supported. Else, -#BPMP_ENODEV */
@@ -1080,7 +1133,9 @@ struct mrq_pg_read_state_response {
 /**
  * @ingroup MRQ_Codes
  * @def MRQ_PG_UPDATE_STATE
- * @brief modify the power-gating state of a partition
+ * @brief modify the power-gating state of a partition. In contrast to
+ * MRQ_PG calls, the operations that change state (on/off) of power
+ * partition are reference counted.
  *
  * * Platforms: T186
  * * Initiators: Any
@@ -1124,6 +1179,171 @@ struct mrq_pg_update_state_request {
 } __ABI_PACKED;
 /** @} */
 
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_PG
+ * @brief Control power-gating state of a partition. In contrast to
+ * MRQ_PG_UPDATE_STATE, operations that change the power partition
+ * state are NOT reference counted
+ *
+ * * Platforms: T186
+ * * Initiators: Any
+ * * Targets: BPMP
+ * * Request Payload: @ref mrq_pg_request
+ * * Response Payload: @ref mrq_pg_response
+ * @addtogroup Powergating
+ * @{
+ */
+
+/**
+ * @name MRQ_PG sub-commands
+ * @{
+ */
+enum mrq_pg_cmd {
+	/**
+	 * @brief Check whether the BPMP driver supports the specified
+	 * request type
+	 *
+	 * mrq_response::err is 0 if the specified request is
+	 * supported and -#BPMP_ENODEV otherwise.
+	 */
+	CMD_PG_QUERY_ABI = 0,
+
+	/**
+	 * @brief Set the current state of specified power domain. The
+	 * possible values for power domains are defined in enum
+	 * pg_states
+	 *
+	 * mrq_response:err is
+	 * 0: Success
+	 * -#BPMP_EINVAL: Invalid request parameters
+	 */
+	CMD_PG_SET_STATE = 1,
+
+	/**
+	 * @brief Get the current state of specified power domain. The
+	 * possible values for power domains are defined in enum
+	 * pg_states
+	 *
+	 * mrq_response:err is
+	 * 0: Success
+	 * -#BPMP_EINVAL: Invalid request parameters
+	 */
+	CMD_PG_GET_STATE = 2,
+
+	/**
+	 * @brief get the name string of specified power domain id.
+	 *
+	 * mrq_response:err is
+	 * 0: Success
+	 * -#BPMP_EINVAL: Invalid request parameters
+	 */
+	CMD_PG_GET_NAME = 3,
+
+
+	/**
+	 * @brief get the highest power domain id in the system. Not
+	 * all IDs between 0 and max_id are valid IDs.
+	 *
+	 * mrq_response:err is
+	 * 0: Success
+	 * -#BPMP_EINVAL: Invalid request parameters
+	 */
+	CMD_PG_GET_MAX_ID = 4,
+};
+/** @} */
+
+#define MRQ_PG_NAME_MAXLEN	40
+
+/**
+ * @brief possible power domain states in
+ * cmd_pg_set_state_request:state and cmd_pg_get_state_response:state.
+ *  PG_STATE_OFF: power domain is OFF
+ *  PG_STATE_ON: power domain is ON
+ *  PG_STATE_RUNNING: power domain is ON and made into directly usable
+ *                    state by turning on the clocks associated with
+ *                    the domain
+ */
+enum pg_states {
+	PG_STATE_OFF = 0,
+	PG_STATE_ON = 1,
+	PG_STATE_RUNNING = 2,
+};
+
+struct cmd_pg_query_abi_request {
+	uint32_t type; /* enum mrq_pg_cmd */
+} __ABI_PACKED;
+
+struct cmd_pg_set_state_request {
+	uint32_t state; /* enum pg_states */
+} __ABI_PACKED;
+
+struct cmd_pg_get_state_response {
+	uint32_t state; /* enum pg_states */
+} __ABI_PACKED;
+
+struct cmd_pg_get_name_response {
+	uint8_t name[MRQ_PG_NAME_MAXLEN];
+} __ABI_PACKED;
+
+struct cmd_pg_get_max_id_response {
+	uint32_t max_id;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Powergating
+ * @brief request with #MRQ_PG
+ *
+ * Used by the sender of an #MRQ_PG message to control power
+ * partitions. The pg_request is split into several sub-commands. Some
+ * sub-commands require no additional data. Others have a sub-command
+ * specific payload
+ *
+ * |sub-command                 |payload                |
+ * |----------------------------|-----------------------|
+ * |CMD_PG_QUERY_ABI            | query_abi             |
+ * |CMD_PG_SET_STATE            | set_state             |
+ * |CMD_PG_GET_STATE            | -                     |
+ * |CMD_PG_GET_NAME             | -                     |
+ * |CMD_PG_GET_MAX_ID           | -                     |
+ *
+ */
+
+struct mrq_pg_request {
+	uint32_t cmd;
+	uint32_t id;
+	union {
+		struct cmd_pg_query_abi_request query_abi;
+		struct cmd_pg_set_state_request set_state;
+	} __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @ingroup Powergating
+ * @brief response to MRQ_PG
+ *
+ * Each sub-command supported by @ref mrq_pg_request may return
+ * sub-command-specific data. Some do and some do not as indicated in
+ * the following table
+ *
+ * |sub-command                 |payload                |
+ * |----------------------------|-----------------------|
+ * |CMD_PG_QUERY_ABI            | -                     |
+ * |CMD_PG_SET_STATE            | -                     |
+ * |CMD_PG_GET_STATE            | get_state             |
+ * |CMD_PG_GET_NAME             | get_name              |
+ * |CMD_PG_GET_MAX_ID           | get_max_id            |
+ *
+ */
+
+struct mrq_pg_response {
+	union {
+		struct cmd_pg_get_state_response get_state;
+		struct cmd_pg_get_name_response get_name;
+		struct cmd_pg_get_max_id_response get_max_id;
+	} __UNION_ANON;
+} __ABI_PACKED;
+
 /**
  * @ingroup MRQ_Codes
  * @def MRQ_THERMAL
@@ -1529,6 +1749,184 @@ struct mrq_trace_iter_request {
 
 /** @} */
 
+/**
+ * @ingroup MRQ_Codes
+ * @def MRQ_RINGBUF_CONSOLE
+ * @brief A ring buffer debug console for BPMP
+ * @addtogroup RingbufConsole
+ *
+ * The ring buffer debug console aims to be a substitute for the UART debug
+ * console. The debug console is implemented with two ring buffers in the
+ * BPMP-FW, the RX (receive) and TX (transmit) buffers. Characters can be read
+ * and written to the buffers by the host via the MRQ interface.
+ *
+ * @{
+ */
+
+/**
+ * @brief Maximum number of bytes transferred in a single write command to the
+ * BPMP
+ *
+ * This is determined by the number of free bytes in the message struct,
+ * rounded down to a multiple of four.
+ */
+#define MRQ_RINGBUF_CONSOLE_MAX_WRITE_LEN 112
+
+/**
+ * @brief Maximum number of bytes transferred in a single read command to the
+ * BPMP
+ *
+ * This is determined by the number of free bytes in the message struct,
+ * rounded down to a multiple of four.
+ */
+#define MRQ_RINGBUF_CONSOLE_MAX_READ_LEN 116
+
+enum mrq_ringbuf_console_host_to_bpmp_cmd {
+	/**
+	 * @brief Check whether the BPMP driver supports the specified request
+	 * type
+	 *
+	 * mrq_response::err is 0 if the specified request is supported and
+	 * -#BPMP_ENODEV otherwise
+	 */
+	CMD_RINGBUF_CONSOLE_QUERY_ABI = 0,
+	/**
+	 * @brief Perform a read operation on the BPMP TX buffer
+	 *
+	 * mrq_response::err is 0
+	 */
+	CMD_RINGBUF_CONSOLE_READ = 1,
+	/**
+	 * @brief Perform a write operation on the BPMP RX buffer
+	 *
+	 * mrq_response::err is 0 if the operation was successful and
+	 * -#BPMP_ENODEV otherwise
+	 */
+	CMD_RINGBUF_CONSOLE_WRITE = 2,
+	/**
+	 * @brief Get the length of the buffer and the physical addresses of
+	 * the buffer data and the head and tail counters
+	 *
+	 * mrq_response::err is 0 if the operation was successful and
+	 * -#BPMP_ENODEV otherwise
+	 */
+	CMD_RINGBUF_CONSOLE_GET_FIFO = 3,
+};
+
+/**
+ * @ingroup RingbufConsole
+ * @brief Host->BPMP request data for request type
+ * #CMD_RINGBUF_CONSOLE_QUERY_ABI
+ */
+struct cmd_ringbuf_console_query_abi_req {
+	/** @brief Command identifier to be queried */
+	uint32_t cmd;
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_ringbuf_console_query_abi_resp {
+	EMPTY
+} __ABI_PACKED;
+
+/**
+ * @ingroup RingbufConsole
+ * @brief Host->BPMP request data for request type #CMD_RINGBUF_CONSOLE_READ
+ */
+struct cmd_ringbuf_console_read_req {
+	/**
+	 * @brief Number of bytes requested to be read from the BPMP TX buffer
+	 */
+	uint8_t len;
+} __ABI_PACKED;
+
+/**
+ * @ingroup RingbufConsole
+ * @brief BPMP->Host response data for request type #CMD_RINGBUF_CONSOLE_READ
+ */
+struct cmd_ringbuf_console_read_resp {
+	/** @brief The actual data read from the BPMP TX buffer */
+	uint8_t data[MRQ_RINGBUF_CONSOLE_MAX_READ_LEN];
+	/** @brief Number of bytes in cmd_ringbuf_console_read_resp::data */
+	uint8_t len;
+} __ABI_PACKED;
+
+/**
+ * @ingroup RingbufConsole
+ * @brief Host->BPMP request data for request type #CMD_RINGBUF_CONSOLE_WRITE
+ */
+struct cmd_ringbuf_console_write_req {
+	/** @brief The actual data to be written to the BPMP RX buffer */
+	uint8_t data[MRQ_RINGBUF_CONSOLE_MAX_WRITE_LEN];
+	/** @brief Number of bytes in cmd_ringbuf_console_write_req::data */
+	uint8_t len;
+} __ABI_PACKED;
+
+/**
+ * @ingroup RingbufConsole
+ * @brief BPMP->Host response data for request type #CMD_RINGBUF_CONSOLE_WRITE
+ */
+struct cmd_ringbuf_console_write_resp {
+	/** @brief Number of bytes of available space in the BPMP RX buffer */
+	uint32_t space_avail;
+	/** @brief Number of bytes that were written to the BPMP RX buffer */
+	uint8_t len;
+} __ABI_PACKED;
+
+/** @private */
+struct cmd_ringbuf_console_get_fifo_req {
+	EMPTY
+} __ABI_PACKED;
+
+/**
+ * @ingroup RingbufConsole
+ * @brief BPMP->Host reply data for request type #CMD_RINGBUF_CONSOLE_GET_FIFO
+ */
+struct cmd_ringbuf_console_get_fifo_resp {
+	/** @brief Physical address of the BPMP TX buffer */
+	uint64_t bpmp_tx_buf_addr;
+	/** @brief Physical address of the BPMP TX buffer head counter */
+	uint64_t bpmp_tx_head_addr;
+	/** @brief Physical address of the BPMP TX buffer tail counter */
+	uint64_t bpmp_tx_tail_addr;
+	/** @brief Length of the BPMP TX buffer */
+	uint32_t bpmp_tx_buf_len;
+} __ABI_PACKED;
+
+/**
+ * @ingroup RingbufConsole
+ * @brief Host->BPMP request data.
+ *
+ * Reply type is union #mrq_ringbuf_console_bpmp_to_host_response .
+ */
+struct mrq_ringbuf_console_host_to_bpmp_request {
+	/**
+	 * @brief type of request. Values listed in enum
+	 * #mrq_ringbuf_console_host_to_bpmp_cmd.
+	 */
+	uint32_t type;
+	/** @brief  request type specific parameters. */
+	union {
+		struct cmd_ringbuf_console_query_abi_req query_abi;
+		struct cmd_ringbuf_console_read_req read;
+		struct cmd_ringbuf_console_write_req write;
+		struct cmd_ringbuf_console_get_fifo_req get_fifo;
+	} __UNION_ANON;
+} __ABI_PACKED;
+
+/**
+ * @ingroup RingbufConsole
+ * @brief Host->BPMP reply data
+ *
+ * In response to struct #mrq_ringbuf_console_host_to_bpmp_request.
+ */
+union mrq_ringbuf_console_bpmp_to_host_response {
+	struct cmd_ringbuf_console_query_abi_resp query_abi;
+	struct cmd_ringbuf_console_read_resp read;
+	struct cmd_ringbuf_console_write_resp write;
+	struct cmd_ringbuf_console_get_fifo_resp get_fifo;
+} __ABI_PACKED;
+/** @} */
+
 /*
  *  4. Enumerations
  */

include/soc/tegra/bpmp.h

@@ -15,6 +15,7 @@
 #define __SOC_TEGRA_BPMP_H
 
 #include <linux/mailbox_client.h>
+#include <linux/pm_domain.h>
 #include <linux/reset-controller.h>
 #include <linux/semaphore.h>
 #include <linux/types.h>
@@ -91,6 +92,8 @@ struct tegra_bpmp {
 	unsigned int num_clocks;
 
 	struct reset_controller_dev rstc;
+
+	struct genpd_onecell_data genpd;
 };
 
 struct tegra_bpmp *tegra_bpmp_get(struct device *dev);
@@ -138,4 +141,13 @@ static inline int tegra_bpmp_init_resets(struct tegra_bpmp *bpmp)
 }
 #endif
 
+#if IS_ENABLED(CONFIG_SOC_TEGRA_POWERGATE_BPMP)
+int tegra_bpmp_init_powergates(struct tegra_bpmp *bpmp);
+#else
+static inline int tegra_bpmp_init_powergates(struct tegra_bpmp *bpmp)
+{
+	return 0;
+}
+#endif
+
 #endif /* __SOC_TEGRA_BPMP_H */