Merge branches 'ib-mfd-x86-usb-watchdog-5.8', 'ib-mfd-power-rtc-5.8',...

Merge branches 'ib-mfd-x86-usb-watchdog-5.8', 'ib-mfd-power-rtc-5.8', 'ib-mfd-iio-power-5.8' and 'ib-mfd-hwmon-5.8' into ibs-for-mfd-merged

Documentation/ABI/testing/sysfs-class-power-mp2629

+What:		/sys/class/power_supply/mp2629_battery/batt_impedance_compen
+Date:		April 2020
+KernelVersion:	5.7
+Description:
+		Represents a battery impedance compensation to accelerate charging.
+
+                Access: Read, Write
+                Valid values: Represented in milli-ohms. Valid range is [0, 140].

Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/gateworks-gsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Gateworks System Controller
+
+description: |
+  The Gateworks System Controller (GSC) is a device present across various
+  Gateworks product families that provides a set of system related features
+  such as the following (refer to the board hardware user manuals to see what
+  features are present)
+   - Watchdog Timer
+   - GPIO
+   - Pushbutton controller
+   - Hardware monitor with ADC's for temperature and voltage rails and
+     fan controller
+
+maintainers:
+  - Tim Harvey <tharvey@gateworks.com>
+  - Robert Jones <rjones@gateworks.com>
+
+properties:
+  $nodename:
+    pattern: "gsc@[0-9a-f]{1,2}"
+  compatible:
+    const: gw,gsc
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  adc:
+    type: object
+    description: Optional hardware monitoring module
+
+    properties:
+      compatible:
+        const: gw,gsc-adc
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+    patternProperties:
+      "^channel@[0-9]+$":
+        type: object
+        description: |
+          Properties for a single ADC which can report cooked values
+          (i.e. temperature sensor based on thermister), raw values
+          (i.e. voltage rail with a pre-scaling resistor divider).
+
+        properties:
+          reg:
+            description: Register of the ADC
+            maxItems: 1
+
+          label:
+            description: Name of the ADC input
+
+          gw,mode:
+            description: |
+              conversion mode:
+                0 - temperature, in C*10
+                1 - pre-scaled voltage value
+                2 - scaled voltage based on an optional resistor divider
+                    and optional offset
+            $ref: /schemas/types.yaml#/definitions/uint32
+            enum: [0, 1, 2]
+
+          gw,voltage-divider-ohms:
+            description: Values of resistors for divider on raw ADC input
+            maxItems: 2
+            items:
+             minimum: 1000
+             maximum: 1000000
+
+          gw,voltage-offset-microvolt:
+            description: |
+              A positive voltage offset to apply to a raw ADC
+              (i.e. to compensate for a diode drop).
+            minimum: 0
+            maximum: 1000000
+
+        required:
+          - gw,mode
+          - reg
+          - label
+
+    required:
+      - compatible
+      - "#address-cells"
+      - "#size-cells"
+
+patternProperties:
+  "^fan-controller@[0-9a-f]+$":
+    type: object
+    description: Optional fan controller
+
+    properties:
+      compatible:
+        const: gw,gsc-fan
+
+      "#address-cells":
+        const: 1
+
+      "#size-cells":
+        const: 0
+
+      reg:
+        description: The fan controller base address
+        maxItems: 1
+
+    required:
+      - compatible
+      - reg
+      - "#address-cells"
+      - "#size-cells"
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        gsc@20 {
+            compatible = "gw,gsc";
+            reg = <0x20>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <4 GPIO_ACTIVE_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <1>;
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            adc {
+                compatible = "gw,gsc-adc";
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                channel@0 { /* A0: Board Temperature */
+                    reg = <0x00>;
+                    label = "temp";
+                    gw,mode = <0>;
+                };
+
+                channel@2 { /* A1: Input Voltage (raw ADC) */
+                    reg = <0x02>;
+                    label = "vdd_vin";
+                    gw,mode = <1>;
+                    gw,voltage-divider-ohms = <22100 1000>;
+                    gw,voltage-offset-microvolt = <800000>;
+                };
+
+                channel@b { /* A2: Battery voltage */
+                    reg = <0x0b>;
+                    label = "vdd_bat";
+                    gw,mode = <1>;
+                };
+            };
+
+            fan-controller@2c {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                compatible = "gw,gsc-fan";
+                reg = <0x2c>;
+            };
+        };
+    };

Documentation/devicetree/bindings/mfd/mps,mp2629.yaml

+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/mps,mp2629.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MP2629 Battery Charger PMIC from Monolithic Power System.
+
+maintainers:
+  - Saravanan Sekar <sravanhome@gmail.com>
+
+description: |
+  MP2629 is a PMIC providing battery charging and power supply for smartphones,
+  wireless camera and portable devices. Chip is controlled over I2C.
+
+  The battery charge management device handles battery charger controller and
+  ADC IIO device for battery, system voltage
+
+properties:
+  compatible:
+    const: mps,mp2629
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  "#interrupt-cells":
+    const: 2
+    description:
+      The first cell is the IRQ number, the second cell is the trigger type.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - "#interrupt-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/input/linux-event-codes.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic@4b {
+            compatible = "mps,mp2629";
+            reg = <0x4b>;
+
+            interrupt-controller;
+            interrupt-parent = <&gpio2>;
+            #interrupt-cells = <2>;
+            interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };

Documentation/devicetree/bindings/mfd/mt6397.txt

@@ -18,24 +18,30 @@ See the following for pwarp node definitions:
 This document describes the binding for MFD device and its sub module.
 
 Required properties:
-compatible: "mediatek,mt6397" or "mediatek,mt6323"
+compatible:
+	"mediatek,mt6323" for PMIC MT6323
+	"mediatek,mt6358" for PMIC MT6358
+	"mediatek,mt6397" for PMIC MT6397
 
 Optional subnodes:
 
 - rtc
 	Required properties: Should be one of follows
 		- compatible: "mediatek,mt6323-rtc"
+		- compatible: "mediatek,mt6358-rtc"
 		- compatible: "mediatek,mt6397-rtc"
 	For details, see ../rtc/rtc-mt6397.txt
 - regulators
 	Required properties:
-		- compatible: "mediatek,mt6397-regulator"
-	see ../regulator/mt6397-regulator.txt
 		- compatible: "mediatek,mt6323-regulator"
 	see ../regulator/mt6323-regulator.txt
+		- compatible: "mediatek,mt6358-regulator"
+	see ../regulator/mt6358-regulator.txt
+		- compatible: "mediatek,mt6397-regulator"
+	see ../regulator/mt6397-regulator.txt
 - codec
 	Required properties:
-		- compatible: "mediatek,mt6397-codec"
+		- compatible: "mediatek,mt6397-codec" or "mediatek,mt6358-sound"
 - clk
 	Required properties:
 		- compatible: "mediatek,mt6397-clk"

Documentation/hwmon/gsc-hwmon.rst

+.. SPDX-License-Identifier: GPL-2.0
+
+Kernel driver gsc-hwmon
+=======================
+
+Supported chips: Gateworks GSC
+Datasheet: http://trac.gateworks.com/wiki/gsc
+Author: Tim Harvey <tharvey@gateworks.com>
+
+Description:
+------------
+
+This driver supports hardware monitoring for the temperature sensor,
+various ADC's connected to the GSC, and optional FAN controller available
+on some boards.
+
+
+Voltage Monitoring
+------------------
+
+The voltage inputs are scaled either internally or by the driver depending
+on the GSC version and firmware. The values returned by the driver do not need
+further scaling. The voltage input labels provide the voltage rail name:
+
+inX_input                  Measured voltage (mV).
+inX_label                  Name of voltage rail.
+
+
+Temperature Monitoring
+----------------------
+
+Temperatures are measured with 12-bit or 10-bit resolution and are scaled
+either internally or by the driver depending on the GSC version and firmware.
+The values returned by the driver reflect millidegree Celcius:
+
+tempX_input                Measured temperature.
+tempX_label                Name of temperature input.
+
+
+PWM Output Control
+------------------
+
+The GSC features 1 PWM output that operates in automatic mode where the
+PWM value will be scalled depending on 6 temperature boundaries.
+The tempeature boundaries are read-write and in millidegree Celcius and the
+read-only PWM values range from 0 (off) to 255 (full speed).
+Fan speed will be set to minimum (off) when the temperature sensor reads
+less than pwm1_auto_point1_temp and maximum when the temperature sensor
+equals or exceeds pwm1_auto_point6_temp.
+
+pwm1_auto_point[1-6]_pwm       PWM value.
+pwm1_auto_point[1-6]_temp      Temperature boundary.
+

Documentation/hwmon/index.rst

@@ -60,6 +60,7 @@ Hardware Monitoring Kernel Drivers
    ftsteutates
    g760a
    g762
+   gsc-hwmon
    gl518sm
    hih6130
    ibmaem

MAINTAINERS

@@ -7028,6 +7028,17 @@ F:	kernel/futex.c
 F:	tools/perf/bench/futex*
 F:	tools/testing/selftests/futex/
 
+GATEWORKS SYSTEM CONTROLLER (GSC) DRIVER
+M:	Tim Harvey <tharvey@gateworks.com>
+M:	Robert Jones <rjones@gateworks.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/mfd/gateworks-gsc.yaml
+F:	drivers/mfd/gateworks-gsc.c
+F:	include/linux/mfd/gsc.h
+F:	Documentation/hwmon/gsc-hwmon.rst
+F:	drivers/hwmon/gsc-hwmon.c
+F:	include/linux/platform_data/gsc_hwmon.h
+
 GASKET DRIVER FRAMEWORK
 M:	Rob Springer <rspringer@google.com>
 M:	Todd Poynor <toddpoynor@google.com>
@@ -11382,10 +11393,15 @@ F:	kernel/module.c
 MONOLITHIC POWER SYSTEM PMIC DRIVER
 M:	Saravanan Sekar <sravanhome@gmail.com>
 S:	Maintained
+F:	Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
 F:	Documentation/devicetree/bindings/regulator/mps,mp*.yaml
+F:	drivers/iio/adc/mp2629_adc.c
+F:	drivers/mfd/mp2629.c
+F:	drivers/power/supply/mp2629_charger.c
 F:	drivers/regulator/mp5416.c
 F:	drivers/regulator/mpq7920.c
 F:	drivers/regulator/mpq7920.h
+F:	include/linux/mfd/mp2629.h
 
 MOTION EYE VAIO PICTUREBOOK CAMERA DRIVER
 S:	Orphan

drivers/hwmon/Kconfig

@@ -523,6 +523,15 @@ config SENSORS_F75375S
 	  This driver can also be built as a module. If so, the module
 	  will be called f75375s.
 
+config SENSORS_GSC
+	tristate "Gateworks System Controller ADC"
+	depends on MFD_GATEWORKS_GSC
+	help
+	  Support for the Gateworks System Controller A/D converters.
+
+	  To compile this driver as a module, choose M here:
+	  the module will be called gsc-hwmon.
+
 config SENSORS_MC13783_ADC
         tristate "Freescale MC13783/MC13892 ADC"
         depends on MFD_MC13XXX

drivers/hwmon/Makefile

@@ -74,6 +74,7 @@ obj-$(CONFIG_SENSORS_G760A)	+= g760a.o
 obj-$(CONFIG_SENSORS_G762)	+= g762.o
 obj-$(CONFIG_SENSORS_GL518SM)	+= gl518sm.o
 obj-$(CONFIG_SENSORS_GL520SM)	+= gl520sm.o
+obj-$(CONFIG_SENSORS_GSC)	+= gsc-hwmon.o
 obj-$(CONFIG_SENSORS_GPIO_FAN)	+= gpio-fan.o
 obj-$(CONFIG_SENSORS_HIH6130)	+= hih6130.o
 obj-$(CONFIG_SENSORS_ULTRA45)	+= ultra45_env.o

drivers/iio/adc/Kconfig

@@ -692,6 +692,16 @@ config MESON_SARADC
 	  To compile this driver as a module, choose M here: the
 	  module will be called meson_saradc.
 
+config MP2629_ADC
+	tristate "Monolithic MP2629 ADC driver"
+	depends on MFD_MP2629
+	help
+	  Say yes to have support for battery charger IC MP2629 ADC device
+	  accessed over I2C.
+
+	  This driver provides ADC conversion of system, input power supply
+	  and battery voltage & current information.
+
 config NAU7802
 	tristate "Nuvoton NAU7802 ADC driver"
 	depends on I2C

drivers/iio/adc/Makefile

@@ -65,6 +65,7 @@ obj-$(CONFIG_MCP3911) += mcp3911.o
 obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o
 obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
 obj-$(CONFIG_MESON_SARADC) += meson_saradc.o
+obj-$(CONFIG_MP2629_ADC) += mp2629_adc.o
 obj-$(CONFIG_MXS_LRADC_ADC) += mxs-lradc-adc.o
 obj-$(CONFIG_NAU7802) += nau7802.o
 obj-$(CONFIG_NPCM_ADC) += npcm_adc.o

drivers/iio/adc/mp2629_adc.c

+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * MP2629 Driver for ADC
+ *
+ * Copyright 2020 Monolithic Power Systems, Inc
+ *
+ * Author: Saravanan Sekar <sravanhome@gmail.com>
+ */
+
+#include <linux/iio/driver.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/machine.h>
+#include <linux/mfd/mp2629.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define	MP2629_REG_ADC_CTRL		0x03
+#define	MP2629_REG_BATT_VOLT		0x0e
+#define	MP2629_REG_SYSTEM_VOLT		0x0f
+#define	MP2629_REG_INPUT_VOLT		0x11
+#define	MP2629_REG_BATT_CURRENT		0x12
+#define	MP2629_REG_INPUT_CURRENT	0x13
+
+#define	MP2629_ADC_START		BIT(7)
+#define	MP2629_ADC_CONTINUOUS		BIT(6)
+
+#define MP2629_MAP(_mp, _mpc) IIO_MAP(#_mp, "mp2629_charger", "mp2629-"_mpc)
+
+#define MP2629_ADC_CHAN(_ch, _type) {				\
+	.type = _type,						\
+	.indexed = 1,						\
+	.datasheet_name = #_ch,					\
+	.channel = MP2629_ ## _ch,				\
+	.address = MP2629_REG_ ## _ch,				\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),		\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+}
+
+struct mp2629_adc {
+	struct regmap *regmap;
+	struct device *dev;
+};
+
+static struct iio_chan_spec mp2629_channels[] = {
+	MP2629_ADC_CHAN(BATT_VOLT, IIO_VOLTAGE),
+	MP2629_ADC_CHAN(SYSTEM_VOLT, IIO_VOLTAGE),
+	MP2629_ADC_CHAN(INPUT_VOLT, IIO_VOLTAGE),
+	MP2629_ADC_CHAN(BATT_CURRENT, IIO_CURRENT),
+	MP2629_ADC_CHAN(INPUT_CURRENT, IIO_CURRENT)
+};
+
+static struct iio_map mp2629_adc_maps[] = {
+	MP2629_MAP(BATT_VOLT, "batt-volt"),
+	MP2629_MAP(SYSTEM_VOLT, "system-volt"),
+	MP2629_MAP(INPUT_VOLT, "input-volt"),
+	MP2629_MAP(BATT_CURRENT, "batt-current"),
+	MP2629_MAP(INPUT_CURRENT, "input-current")
+};
+
+static int mp2629_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan,
+			int *val, int *val2, long mask)
+{
+	struct mp2629_adc *info = iio_priv(indio_dev);
+	unsigned int rval;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = regmap_read(info->regmap, chan->address, &rval);
+		if (ret)
+			return ret;
+
+		if (chan->address == MP2629_INPUT_VOLT)
+			rval &= GENMASK(6, 0);
+		*val = rval;
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->channel) {
+		case MP2629_BATT_VOLT:
+		case MP2629_SYSTEM_VOLT:
+			*val = 20;
+			return IIO_VAL_INT;
+
+		case MP2629_INPUT_VOLT:
+			*val = 60;
+			return IIO_VAL_INT;
+
+		case MP2629_BATT_CURRENT:
+			*val = 175;
+			*val2 = 10;
+			return IIO_VAL_FRACTIONAL;
+
+		case MP2629_INPUT_CURRENT:
+			*val = 133;
+			*val2 = 10;
+			return IIO_VAL_FRACTIONAL;
+
+		default:
+			return -EINVAL;
+		}
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info mp2629_adc_info = {
+	.read_raw = &mp2629_read_raw,
+};
+
+static int mp2629_adc_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct mp2629_data *ddata = dev_get_drvdata(dev->parent);
+	struct mp2629_adc *info;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*info));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	info = iio_priv(indio_dev);
+	info->regmap = ddata->regmap;
+	info->dev = dev;
+	platform_set_drvdata(pdev, indio_dev);
+
+	ret = regmap_update_bits(info->regmap, MP2629_REG_ADC_CTRL,
+				MP2629_ADC_START | MP2629_ADC_CONTINUOUS,
+				MP2629_ADC_START | MP2629_ADC_CONTINUOUS);
+	if (ret) {
+		dev_err(dev, "adc enable fail: %d\n", ret);
+		return ret;
+	}
+
+	ret = iio_map_array_register(indio_dev, mp2629_adc_maps);
+	if (ret) {
+		dev_err(dev, "IIO maps register fail: %d\n", ret);
+		goto fail_disable;
+	}
+
+	indio_dev->name = "mp2629-adc";
+	indio_dev->dev.parent = dev;
+	indio_dev->channels = mp2629_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mp2629_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &mp2629_adc_info;
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(dev, "IIO device register fail: %d\n", ret);
+		goto fail_map_unregister;
+	}
+
+	return 0;
+
+fail_map_unregister:
+	iio_map_array_unregister(indio_dev);
+
+fail_disable:
+	regmap_update_bits(info->regmap, MP2629_REG_ADC_CTRL,
+					 MP2629_ADC_CONTINUOUS, 0);
+	regmap_update_bits(info->regmap, MP2629_REG_ADC_CTRL,
+					 MP2629_ADC_START, 0);
+
+	return ret;
+}
+
+static int mp2629_adc_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct mp2629_adc *info = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	iio_map_array_unregister(indio_dev);
+
+	regmap_update_bits(info->regmap, MP2629_REG_ADC_CTRL,
+					 MP2629_ADC_CONTINUOUS, 0);
+	regmap_update_bits(info->regmap, MP2629_REG_ADC_CTRL,
+					 MP2629_ADC_START, 0);
+
+	return 0;
+}
+
+static const struct of_device_id mp2629_adc_of_match[] = {
+	{ .compatible = "mps,mp2629_adc"},
+	{}
+};
+MODULE_DEVICE_TABLE(of, mp2629_adc_of_match);
+
+static struct platform_driver mp2629_adc_driver = {
+	.driver = {
+		.name = "mp2629_adc",
+		.of_match_table = mp2629_adc_of_match,
+	},
+	.probe		= mp2629_adc_probe,
+	.remove		= mp2629_adc_remove,
+};
+module_platform_driver(mp2629_adc_driver);
+
+MODULE_AUTHOR("Saravanan Sekar <sravanhome@gmail.com>");
+MODULE_DESCRIPTION("MP2629 ADC driver");
+MODULE_LICENSE("GPL");

drivers/mfd/Kconfig

@@ -407,6 +407,21 @@ config MFD_EXYNOS_LPASS
 	  Select this option to enable support for Samsung Exynos Low Power
 	  Audio Subsystem.
 
+config MFD_GATEWORKS_GSC
+	tristate "Gateworks System Controller"
+	depends on (I2C && OF)
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	help
+	  Enable support for the Gateworks System Controller (GSC) found
+	  on Gateworks Single Board Computers supporting system functions
+	  such as push-button monitor, multiple ADC's for voltage and
+	  temperature monitoring, fan controller and watchdog monitor.
+	  This driver provides common support for accessing the device.
+	  Additional drivers must be enabled in order to use the
+	  functionality of the device.
+
 config MFD_MC13XXX
 	tristate
 	depends on (SPI_MASTER || I2C)
@@ -434,6 +449,15 @@ config MFD_MC13XXX_I2C
 	help
 	  Select this if your MC13xxx is connected via an I2C bus.
 
+config MFD_MP2629
+	tristate "Monolithic Power Systems MP2629 ADC and Battery charger"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Select this option to enable support for Monolithic Power Systems
+	  battery charger. This provides ADC, thermal and battery charger power
+	  management functions.
+
 config MFD_MXS_LRADC
 	tristate "Freescale i.MX23/i.MX28 LRADC"
 	depends on ARCH_MXS || COMPILE_TEST

drivers/mfd/Makefile

@@ -15,6 +15,7 @@ obj-$(CONFIG_MFD_BCM590XX)	+= bcm590xx.o
 obj-$(CONFIG_MFD_BD9571MWV)	+= bd9571mwv.o
 obj-$(CONFIG_MFD_CROS_EC_DEV)	+= cros_ec_dev.o
 obj-$(CONFIG_MFD_EXYNOS_LPASS)	+= exynos-lpass.o
+obj-$(CONFIG_MFD_GATEWORKS_GSC)	+= gateworks-gsc.o
 
 obj-$(CONFIG_HTC_PASIC3)	+= htc-pasic3.o
 obj-$(CONFIG_HTC_I2CPLD)	+= htc-i2cpld.o
@@ -170,6 +171,8 @@ obj-$(CONFIG_MFD_MAX8925)	+= max8925.o
 obj-$(CONFIG_MFD_MAX8997)	+= max8997.o max8997-irq.o
 obj-$(CONFIG_MFD_MAX8998)	+= max8998.o max8998-irq.o
 
+obj-$(CONFIG_MFD_MP2629)	+= mp2629.o
+
 pcf50633-objs			:= pcf50633-core.o pcf50633-irq.o
 obj-$(CONFIG_MFD_PCF50633)	+= pcf50633.o
 obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
@@ -240,7 +243,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC)	+= intel-soc-pmic.o
 obj-$(CONFIG_INTEL_SOC_PMIC_BXTWC)	+= intel_soc_pmic_bxtwc.o
 obj-$(CONFIG_INTEL_SOC_PMIC_CHTWC)	+= intel_soc_pmic_chtwc.o
 obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI)	+= intel_soc_pmic_chtdc_ti.o
-mt6397-objs	:= mt6397-core.o mt6397-irq.o
+mt6397-objs			:= mt6397-core.o mt6397-irq.o mt6358-irq.o
 obj-$(CONFIG_MFD_MT6397)	+= mt6397.o
 obj-$(CONFIG_INTEL_SOC_PMIC_MRFLD)	+= intel_soc_pmic_mrfld.o
 

drivers/mfd/gateworks-gsc.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The Gateworks System Controller (GSC) is a multi-function
+ * device designed for use in Gateworks Single Board Computers.
+ * The control interface is I2C, with an interrupt. The device supports
+ * system functions such as push-button monitoring, multiple ADC's for
+ * voltage and temperature monitoring, fan controller and watchdog monitor.
+ *
+ * Copyright (C) 2020 Gateworks Corporation
+ */
+
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/gsc.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <asm/unaligned.h>
+
+/*
+ * The GSC suffers from an errata where occasionally during
+ * ADC cycles the chip can NAK I2C transactions. To ensure we have reliable
+ * register access we place retries around register access.
+ */
+#define I2C_RETRIES	3
+
+int gsc_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct i2c_client *client = context;
+	int retry, ret;
+
+	for (retry = 0; retry < I2C_RETRIES; retry++) {
+		ret = i2c_smbus_write_byte_data(client, reg, val);
+		/*
+		 * -EAGAIN returned when the i2c host controller is busy
+		 * -EIO returned when i2c device is busy
+		 */
+		if (ret != -EAGAIN && ret != -EIO)
+			break;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gsc_write);
+
+int gsc_read(void *context, unsigned int reg, unsigned int *val)
+{
+	struct i2c_client *client = context;
+	int retry, ret;
+
+	for (retry = 0; retry < I2C_RETRIES; retry++) {
+		ret = i2c_smbus_read_byte_data(client, reg);
+		/*
+		 * -EAGAIN returned when the i2c host controller is busy
+		 * -EIO returned when i2c device is busy
+		 */
+		if (ret != -EAGAIN && ret != -EIO)
+			break;
+	}
+	*val = ret & 0xff;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(gsc_read);
+
+/*
+ * gsc_powerdown - API to use GSC to power down board for a specific time
+ *
+ * secs - number of seconds to remain powered off
+ */
+static int gsc_powerdown(struct gsc_dev *gsc, unsigned long secs)
+{
+	int ret;
+	unsigned char regs[4];
+
+	dev_info(&gsc->i2c->dev, "GSC powerdown for %ld seconds\n",
+		 secs);
+
+	put_unaligned_le32(secs, regs);
+	ret = regmap_bulk_write(gsc->regmap, GSC_TIME_ADD, regs, 4);
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(gsc->regmap, GSC_CTRL_1,
+				 BIT(GSC_CTRL_1_SLEEP_ADD),
+				 BIT(GSC_CTRL_1_SLEEP_ADD));
+	if (ret)
+		return ret;
+
+	ret = regmap_update_bits(gsc->regmap, GSC_CTRL_1,
+				 BIT(GSC_CTRL_1_SLEEP_ACTIVATE) |
+				 BIT(GSC_CTRL_1_SLEEP_ENABLE),
+				 BIT(GSC_CTRL_1_SLEEP_ACTIVATE) |
+				 BIT(GSC_CTRL_1_SLEEP_ENABLE));
+
+
+	return ret;
+}
+
+static ssize_t gsc_show(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct gsc_dev *gsc = dev_get_drvdata(dev);
+	const char *name = attr->attr.name;
+	int rz = 0;
+
+	if (strcasecmp(name, "fw_version") == 0)
+		rz = sprintf(buf, "%d\n", gsc->fwver);
+	else if (strcasecmp(name, "fw_crc") == 0)
+		rz = sprintf(buf, "0x%04x\n", gsc->fwcrc);
+	else
+		dev_err(dev, "invalid command: '%s'\n", name);
+
+	return rz;
+}
+
+static ssize_t gsc_store(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	struct gsc_dev *gsc = dev_get_drvdata(dev);
+	const char *name = attr->attr.name;
+	long value;
+
+	if (strcasecmp(name, "powerdown") == 0) {
+		if (kstrtol(buf, 0, &value) == 0)
+			gsc_powerdown(gsc, value);
+	} else {
+		dev_err(dev, "invalid command: '%s\n", name);
+	}
+
+	return count;
+}
+
+static struct device_attribute attr_fwver =
+	__ATTR(fw_version, 0440, gsc_show, NULL);
+static struct device_attribute attr_fwcrc =
+	__ATTR(fw_crc, 0440, gsc_show, NULL);
+static struct device_attribute attr_pwrdown =
+	__ATTR(powerdown, 0220, NULL, gsc_store);
+
+static struct attribute *gsc_attrs[] = {
+	&attr_fwver.attr,
+	&attr_fwcrc.attr,
+	&attr_pwrdown.attr,
+	NULL,
+};
+
+static struct attribute_group attr_group = {
+	.attrs = gsc_attrs,
+};
+
+static const struct of_device_id gsc_of_match[] = {
+	{ .compatible = "gw,gsc", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gsc_of_match);
+
+static struct regmap_bus gsc_regmap_bus = {
+	.reg_read = gsc_read,
+	.reg_write = gsc_write,
+};
+
+static const struct regmap_config gsc_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_NONE,
+	.max_register = GSC_WP,
+};
+
+static const struct regmap_irq gsc_irqs[] = {
+	REGMAP_IRQ_REG(GSC_IRQ_PB, 0, BIT(GSC_IRQ_PB)),
+	REGMAP_IRQ_REG(GSC_IRQ_KEY_ERASED, 0, BIT(GSC_IRQ_KEY_ERASED)),
+	REGMAP_IRQ_REG(GSC_IRQ_EEPROM_WP, 0, BIT(GSC_IRQ_EEPROM_WP)),
+	REGMAP_IRQ_REG(GSC_IRQ_RESV, 0, BIT(GSC_IRQ_RESV)),
+	REGMAP_IRQ_REG(GSC_IRQ_GPIO, 0, BIT(GSC_IRQ_GPIO)),
+	REGMAP_IRQ_REG(GSC_IRQ_TAMPER, 0, BIT(GSC_IRQ_TAMPER)),
+	REGMAP_IRQ_REG(GSC_IRQ_WDT_TIMEOUT, 0, BIT(GSC_IRQ_WDT_TIMEOUT)),
+	REGMAP_IRQ_REG(GSC_IRQ_SWITCH_HOLD, 0, BIT(GSC_IRQ_SWITCH_HOLD)),
+};
+
+static const struct regmap_irq_chip gsc_irq_chip = {
+	.name = "gateworks-gsc",
+	.irqs = gsc_irqs,
+	.num_irqs = ARRAY_SIZE(gsc_irqs),
+	.num_regs = 1,
+	.status_base = GSC_IRQ_STATUS,
+	.mask_base = GSC_IRQ_ENABLE,
+	.mask_invert = true,
+	.ack_base = GSC_IRQ_STATUS,
+	.ack_invert = true,
+};
+
+static int gsc_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct gsc_dev *gsc;
+	struct regmap_irq_chip_data *irq_data;
+	int ret;
+	unsigned int reg;
+
+	gsc = devm_kzalloc(dev, sizeof(*gsc), GFP_KERNEL);
+	if (!gsc)
+		return -ENOMEM;
+
+	gsc->dev = &client->dev;
+	gsc->i2c = client;
+	i2c_set_clientdata(client, gsc);
+
+	gsc->regmap = devm_regmap_init(dev, &gsc_regmap_bus, client,
+				       &gsc_regmap_config);
+	if (IS_ERR(gsc->regmap))
+		return PTR_ERR(gsc->regmap);
+
+	if (regmap_read(gsc->regmap, GSC_FW_VER, &reg))
+		return -EIO;
+	gsc->fwver = reg;
+
+	regmap_read(gsc->regmap, GSC_FW_CRC, &reg);
+	gsc->fwcrc = reg;
+	regmap_read(gsc->regmap, GSC_FW_CRC + 1, &reg);
+	gsc->fwcrc |= reg << 8;
+
+	gsc->i2c_hwmon = devm_i2c_new_dummy_device(dev, client->adapter,
+						   GSC_HWMON);
+	if (IS_ERR(gsc->i2c_hwmon)) {
+		dev_err(dev, "Failed to allocate I2C device for HWMON\n");
+		return PTR_ERR(gsc->i2c_hwmon);
+	}
+
+	ret = devm_regmap_add_irq_chip(dev, gsc->regmap, client->irq,
+				       IRQF_ONESHOT | IRQF_SHARED |
+				       IRQF_TRIGGER_FALLING, 0,
+				       &gsc_irq_chip, &irq_data);
+	if (ret)
+		return ret;
+
+	dev_info(dev, "Gateworks System Controller v%d: fw 0x%04x\n",
+		 gsc->fwver, gsc->fwcrc);
+
+	ret = sysfs_create_group(&dev->kobj, &attr_group);
+	if (ret)
+		dev_err(dev, "failed to create sysfs attrs\n");
+
+	ret = devm_of_platform_populate(dev);
+	if (ret) {
+		sysfs_remove_group(&dev->kobj, &attr_group);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int gsc_remove(struct i2c_client *client)
+{
+	sysfs_remove_group(&client->dev.kobj, &attr_group);
+
+	return 0;
+}
+
+static struct i2c_driver gsc_driver = {
+	.driver = {
+		.name	= "gateworks-gsc",
+		.of_match_table = gsc_of_match,
+	},
+	.probe_new	= gsc_probe,
+	.remove		= gsc_remove,
+};
+module_i2c_driver(gsc_driver);
+
+MODULE_AUTHOR("Tim Harvey <tharvey@gateworks.com>");
+MODULE_DESCRIPTION("I2C Core interface for GSC");
+MODULE_LICENSE("GPL v2");

drivers/mfd/mp2629.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * MP2629 parent driver for ADC and battery charger
+ *
+ * Copyright 2020 Monolithic Power Systems, Inc
+ *
+ * Author: Saravanan Sekar <sravanhome@gmail.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/mp2629.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+static const struct mfd_cell mp2629_cell[] = {
+	{
+		.name = "mp2629_adc",
+		.of_compatible = "mps,mp2629_adc",
+	},
+	{
+		.name = "mp2629_charger",
+		.of_compatible = "mps,mp2629_charger",
+	}
+};
+
+static const struct regmap_config mp2629_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x17,
+};
+
+static int mp2629_probe(struct i2c_client *client)
+{
+	struct mp2629_data *ddata;
+	int ret;
+
+	ddata = devm_kzalloc(&client->dev, sizeof(*ddata), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	ddata->dev = &client->dev;
+	i2c_set_clientdata(client, ddata);
+
+	ddata->regmap = devm_regmap_init_i2c(client, &mp2629_regmap_config);
+	if (IS_ERR(ddata->regmap)) {
+		dev_err(ddata->dev, "Failed to allocate regmap\n");
+		return PTR_ERR(ddata->regmap);
+	}
+
+	ret = devm_mfd_add_devices(ddata->dev, PLATFORM_DEVID_AUTO, mp2629_cell,
+				   ARRAY_SIZE(mp2629_cell), NULL, 0, NULL);
+	if (ret)
+		dev_err(ddata->dev, "Failed to register sub-devices %d\n", ret);
+
+	return ret;
+}
+
+static const struct of_device_id mp2629_of_match[] = {
+	{ .compatible = "mps,mp2629"},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mp2629_of_match);
+
+static struct i2c_driver mp2629_driver = {
+	.driver = {
+		.name = "mp2629",
+		.of_match_table = mp2629_of_match,
+	},
+	.probe_new	= mp2629_probe,
+};
+module_i2c_driver(mp2629_driver);
+
+MODULE_AUTHOR("Saravanan Sekar <sravanhome@gmail.com>");
+MODULE_DESCRIPTION("MP2629 Battery charger parent driver");
+MODULE_LICENSE("GPL");

drivers/mfd/mt6358-irq.c

+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 MediaTek Inc.
+
+#include <linux/interrupt.h>
+#include <linux/mfd/mt6358/core.h>
+#include <linux/mfd/mt6358/registers.h>
+#include <linux/mfd/mt6397/core.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+static struct irq_top_t mt6358_ints[] = {
+	MT6358_TOP_GEN(BUCK),
+	MT6358_TOP_GEN(LDO),
+	MT6358_TOP_GEN(PSC),
+	MT6358_TOP_GEN(SCK),
+	MT6358_TOP_GEN(BM),
+	MT6358_TOP_GEN(HK),
+	MT6358_TOP_GEN(AUD),
+	MT6358_TOP_GEN(MISC),
+};
+
+static void pmic_irq_enable(struct irq_data *data)
+{
+	unsigned int hwirq = irqd_to_hwirq(data);
+	struct mt6397_chip *chip = irq_data_get_irq_chip_data(data);
+	struct pmic_irq_data *irqd = chip->irq_data;
+
+	irqd->enable_hwirq[hwirq] = true;
+}
+
+static void pmic_irq_disable(struct irq_data *data)
+{
+	unsigned int hwirq = irqd_to_hwirq(data);
+	struct mt6397_chip *chip = irq_data_get_irq_chip_data(data);
+	struct pmic_irq_data *irqd = chip->irq_data;
+
+	irqd->enable_hwirq[hwirq] = false;
+}
+
+static void pmic_irq_lock(struct irq_data *data)
+{
+	struct mt6397_chip *chip = irq_data_get_irq_chip_data(data);
+
+	mutex_lock(&chip->irqlock);
+}
+
+static void pmic_irq_sync_unlock(struct irq_data *data)
+{
+	unsigned int i, top_gp, gp_offset, en_reg, int_regs, shift;
+	struct mt6397_chip *chip = irq_data_get_irq_chip_data(data);
+	struct pmic_irq_data *irqd = chip->irq_data;
+
+	for (i = 0; i < irqd->num_pmic_irqs; i++) {
+		if (irqd->enable_hwirq[i] == irqd->cache_hwirq[i])
+			continue;
+
+		/* Find out the IRQ group */
+		top_gp = 0;
+		while ((top_gp + 1) < irqd->num_top &&
+		       i >= mt6358_ints[top_gp + 1].hwirq_base)
+			top_gp++;
+
+		/* Find the IRQ registers */
+		gp_offset = i - mt6358_ints[top_gp].hwirq_base;
+		int_regs = gp_offset / MT6358_REG_WIDTH;
+		shift = gp_offset % MT6358_REG_WIDTH;
+		en_reg = mt6358_ints[top_gp].en_reg +
+			 (mt6358_ints[top_gp].en_reg_shift * int_regs);
+
+		regmap_update_bits(chip->regmap, en_reg, BIT(shift),
+				   irqd->enable_hwirq[i] << shift);
+
+		irqd->cache_hwirq[i] = irqd->enable_hwirq[i];
+	}
+	mutex_unlock(&chip->irqlock);
+}
+
+static struct irq_chip mt6358_irq_chip = {
+	.name = "mt6358-irq",
+	.flags = IRQCHIP_SKIP_SET_WAKE,
+	.irq_enable = pmic_irq_enable,
+	.irq_disable = pmic_irq_disable,
+	.irq_bus_lock = pmic_irq_lock,
+	.irq_bus_sync_unlock = pmic_irq_sync_unlock,
+};
+
+static void mt6358_irq_sp_handler(struct mt6397_chip *chip,
+				  unsigned int top_gp)
+{
+	unsigned int irq_status, sta_reg, status;
+	unsigned int hwirq, virq;
+	int i, j, ret;
+
+	for (i = 0; i < mt6358_ints[top_gp].num_int_regs; i++) {
+		sta_reg = mt6358_ints[top_gp].sta_reg +
+			mt6358_ints[top_gp].sta_reg_shift * i;
+
+		ret = regmap_read(chip->regmap, sta_reg, &irq_status);
+		if (ret) {
+			dev_err(chip->dev,
+				"Failed to read IRQ status, ret=%d\n", ret);
+			return;
+		}
+
+		if (!irq_status)
+			continue;
+
+		status = irq_status;
+		do {
+			j = __ffs(status);
+
+			hwirq = mt6358_ints[top_gp].hwirq_base +
+				MT6358_REG_WIDTH * i + j;
+
+			virq = irq_find_mapping(chip->irq_domain, hwirq);
+			if (virq)
+				handle_nested_irq(virq);
+
+			status &= ~BIT(j);
+		} while (status);
+
+		regmap_write(chip->regmap, sta_reg, irq_status);
+	}
+}
+
+static irqreturn_t mt6358_irq_handler(int irq, void *data)
+{
+	struct mt6397_chip *chip = data;
+	struct pmic_irq_data *mt6358_irq_data = chip->irq_data;
+	unsigned int bit, i, top_irq_status = 0;
+	int ret;
+
+	ret = regmap_read(chip->regmap,
+			  mt6358_irq_data->top_int_status_reg,
+			  &top_irq_status);
+	if (ret) {
+		dev_err(chip->dev,
+			"Failed to read status from the device, ret=%d\n", ret);
+		return IRQ_NONE;
+	}
+
+	for (i = 0; i < mt6358_irq_data->num_top; i++) {
+		bit = BIT(mt6358_ints[i].top_offset);
+		if (top_irq_status & bit) {
+			mt6358_irq_sp_handler(chip, i);
+			top_irq_status &= ~bit;
+			if (!top_irq_status)
+				break;
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int pmic_irq_domain_map(struct irq_domain *d, unsigned int irq,
+			       irq_hw_number_t hw)
+{
+	struct mt6397_chip *mt6397 = d->host_data;
+
+	irq_set_chip_data(irq, mt6397);
+	irq_set_chip_and_handler(irq, &mt6358_irq_chip, handle_level_irq);
+	irq_set_nested_thread(irq, 1);
+	irq_set_noprobe(irq);
+
+	return 0;
+}
+
+static const struct irq_domain_ops mt6358_irq_domain_ops = {
+	.map = pmic_irq_domain_map,
+	.xlate = irq_domain_xlate_twocell,
+};
+
+int mt6358_irq_init(struct mt6397_chip *chip)
+{
+	int i, j, ret;
+	struct pmic_irq_data *irqd;
+
+	irqd = devm_kzalloc(chip->dev, sizeof(*irqd), GFP_KERNEL);
+	if (!irqd)
+		return -ENOMEM;
+
+	chip->irq_data = irqd;
+
+	mutex_init(&chip->irqlock);
+	irqd->top_int_status_reg = MT6358_TOP_INT_STATUS0;
+	irqd->num_pmic_irqs = MT6358_IRQ_NR;
+	irqd->num_top = ARRAY_SIZE(mt6358_ints);
+
+	irqd->enable_hwirq = devm_kcalloc(chip->dev,
+					  irqd->num_pmic_irqs,
+					  sizeof(*irqd->enable_hwirq),
+					  GFP_KERNEL);
+	if (!irqd->enable_hwirq)
+		return -ENOMEM;
+
+	irqd->cache_hwirq = devm_kcalloc(chip->dev,
+					 irqd->num_pmic_irqs,
+					 sizeof(*irqd->cache_hwirq),
+					 GFP_KERNEL);
+	if (!irqd->cache_hwirq)
+		return -ENOMEM;
+
+	/* Disable all interrupts for initializing */
+	for (i = 0; i < irqd->num_top; i++) {
+		for (j = 0; j < mt6358_ints[i].num_int_regs; j++)
+			regmap_write(chip->regmap,
+				     mt6358_ints[i].en_reg +
+				     mt6358_ints[i].en_reg_shift * j, 0);
+	}
+
+	chip->irq_domain = irq_domain_add_linear(chip->dev->of_node,
+						 irqd->num_pmic_irqs,
+						 &mt6358_irq_domain_ops, chip);
+	if (!chip->irq_domain) {
+		dev_err(chip->dev, "Could not create IRQ domain\n");
+		return -ENODEV;
+	}
+
+	ret = devm_request_threaded_irq(chip->dev, chip->irq, NULL,
+					mt6358_irq_handler, IRQF_ONESHOT,
+					mt6358_irq_chip.name, chip);
+	if (ret) {
+		dev_err(chip->dev, "Failed to register IRQ=%d, ret=%d\n",
+			chip->irq, ret);
+		return ret;
+	}
+
+	enable_irq_wake(chip->irq);
+	return ret;
+}

drivers/mfd/mt6397-core.c

@@ -12,13 +12,18 @@
 #include <linux/regmap.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/mt6323/core.h>
+#include <linux/mfd/mt6358/core.h>
 #include <linux/mfd/mt6397/core.h>
 #include <linux/mfd/mt6323/registers.h>
+#include <linux/mfd/mt6358/registers.h>
 #include <linux/mfd/mt6397/registers.h>
 
 #define MT6323_RTC_BASE		0x8000
 #define MT6323_RTC_SIZE		0x40
 
+#define MT6358_RTC_BASE		0x0588
+#define MT6358_RTC_SIZE		0x3c
+
 #define MT6397_RTC_BASE		0xe000
 #define MT6397_RTC_SIZE		0x3e
 
@@ -30,6 +35,11 @@ static const struct resource mt6323_rtc_resources[] = {
 	DEFINE_RES_IRQ(MT6323_IRQ_STATUS_RTC),
 };
 
+static const struct resource mt6358_rtc_resources[] = {
+	DEFINE_RES_MEM(MT6358_RTC_BASE, MT6358_RTC_SIZE),
+	DEFINE_RES_IRQ(MT6358_IRQ_RTC),
+};
+
 static const struct resource mt6397_rtc_resources[] = {
 	DEFINE_RES_MEM(MT6397_RTC_BASE, MT6397_RTC_SIZE),
 	DEFINE_RES_IRQ(MT6397_IRQ_RTC),
@@ -74,6 +84,21 @@ static const struct mfd_cell mt6323_devs[] = {
 	},
 };
 
+static const struct mfd_cell mt6358_devs[] = {
+	{
+		.name = "mt6358-regulator",
+		.of_compatible = "mediatek,mt6358-regulator"
+	}, {
+		.name = "mt6358-rtc",
+		.num_resources = ARRAY_SIZE(mt6358_rtc_resources),
+		.resources = mt6358_rtc_resources,
+		.of_compatible = "mediatek,mt6358-rtc",
+	}, {
+		.name = "mt6358-sound",
+		.of_compatible = "mediatek,mt6358-sound"
+	},
+};
+
 static const struct mfd_cell mt6397_devs[] = {
 	{
 		.name = "mt6397-rtc",
@@ -100,54 +125,42 @@ static const struct mfd_cell mt6397_devs[] = {
 	}
 };
 
-#ifdef CONFIG_PM_SLEEP
-static int mt6397_irq_suspend(struct device *dev)
-{
-	struct mt6397_chip *chip = dev_get_drvdata(dev);
-
-	regmap_write(chip->regmap, chip->int_con[0], chip->wake_mask[0]);
-	regmap_write(chip->regmap, chip->int_con[1], chip->wake_mask[1]);
-
-	enable_irq_wake(chip->irq);
-
-	return 0;
-}
-
-static int mt6397_irq_resume(struct device *dev)
-{
-	struct mt6397_chip *chip = dev_get_drvdata(dev);
-
-	regmap_write(chip->regmap, chip->int_con[0], chip->irq_masks_cur[0]);
-	regmap_write(chip->regmap, chip->int_con[1], chip->irq_masks_cur[1]);
-
-	disable_irq_wake(chip->irq);
-
-	return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_irq_suspend,
-			mt6397_irq_resume);
-
 struct chip_data {
 	u32 cid_addr;
 	u32 cid_shift;
+	const struct mfd_cell *cells;
+	int cell_size;
+	int (*irq_init)(struct mt6397_chip *chip);
 };
 
 static const struct chip_data mt6323_core = {
 	.cid_addr = MT6323_CID,
 	.cid_shift = 0,
+	.cells = mt6323_devs,
+	.cell_size = ARRAY_SIZE(mt6323_devs),
+	.irq_init = mt6397_irq_init,
+};
+
+static const struct chip_data mt6358_core = {
+	.cid_addr = MT6358_SWCID,
+	.cid_shift = 8,
+	.cells = mt6358_devs,
+	.cell_size = ARRAY_SIZE(mt6358_devs),
+	.irq_init = mt6358_irq_init,
 };
 
 static const struct chip_data mt6397_core = {
 	.cid_addr = MT6397_CID,
 	.cid_shift = 0,
+	.cells = mt6397_devs,
+	.cell_size = ARRAY_SIZE(mt6397_devs),
+	.irq_init = mt6397_irq_init,
 };
 
 static int mt6397_probe(struct platform_device *pdev)
 {
 	int ret;
-	unsigned int id;
+	unsigned int id = 0;
 	struct mt6397_chip *pmic;
 	const struct chip_data *pmic_core;
 
@@ -183,29 +196,13 @@ static int mt6397_probe(struct platform_device *pdev)
 	if (pmic->irq <= 0)
 		return pmic->irq;
 
-	ret = mt6397_irq_init(pmic);
+	ret = pmic_core->irq_init(pmic);
 	if (ret)
 		return ret;
 
-	switch (pmic->chip_id) {
-	case MT6323_CHIP_ID:
-		ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
-					   mt6323_devs, ARRAY_SIZE(mt6323_devs),
-					   NULL, 0, pmic->irq_domain);
-		break;
-
-	case MT6391_CHIP_ID:
-	case MT6397_CHIP_ID:
-		ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
-					   mt6397_devs, ARRAY_SIZE(mt6397_devs),
-					   NULL, 0, pmic->irq_domain);
-		break;
-
-	default:
-		dev_err(&pdev->dev, "unsupported chip: %d\n", pmic->chip_id);
-		return -ENODEV;
-	}
-
+	ret = devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_NONE,
+				   pmic_core->cells, pmic_core->cell_size,
+				   NULL, 0, pmic->irq_domain);
 	if (ret) {
 		irq_domain_remove(pmic->irq_domain);
 		dev_err(&pdev->dev, "failed to add child devices: %d\n", ret);
@@ -218,6 +215,9 @@ static const struct of_device_id mt6397_of_match[] = {
 	{
 		.compatible = "mediatek,mt6323",
 		.data = &mt6323_core,
+	}, {
+		.compatible = "mediatek,mt6358",
+		.data = &mt6358_core,
 	}, {
 		.compatible = "mediatek,mt6397",
 		.data = &mt6397_core,
@@ -238,7 +238,6 @@ static struct platform_driver mt6397_driver = {
 	.driver = {
 		.name = "mt6397",
 		.of_match_table = of_match_ptr(mt6397_of_match),
-		.pm = &mt6397_pm_ops,
 	},
 	.id_table = mt6397_id,
 };

drivers/mfd/mt6397-irq.c

@@ -9,6 +9,7 @@
 #include <linux/of_irq.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
+#include <linux/suspend.h>
 #include <linux/mfd/mt6323/core.h>
 #include <linux/mfd/mt6323/registers.h>
 #include <linux/mfd/mt6397/core.h>
@@ -81,7 +82,7 @@ static struct irq_chip mt6397_irq_chip = {
 static void mt6397_irq_handle_reg(struct mt6397_chip *mt6397, int reg,
 				  int irqbase)
 {
-	unsigned int status;
+	unsigned int status = 0;
 	int i, irq, ret;
 
 	ret = regmap_read(mt6397->regmap, reg, &status);
@@ -128,6 +129,36 @@ static const struct irq_domain_ops mt6397_irq_domain_ops = {
 	.map = mt6397_irq_domain_map,
 };
 
+static int mt6397_irq_pm_notifier(struct notifier_block *notifier,
+				  unsigned long pm_event, void *unused)
+{
+	struct mt6397_chip *chip =
+		container_of(notifier, struct mt6397_chip, pm_nb);
+
+	switch (pm_event) {
+	case PM_SUSPEND_PREPARE:
+		regmap_write(chip->regmap,
+			     chip->int_con[0], chip->wake_mask[0]);
+		regmap_write(chip->regmap,
+			     chip->int_con[1], chip->wake_mask[1]);
+		enable_irq_wake(chip->irq);
+		break;
+
+	case PM_POST_SUSPEND:
+		regmap_write(chip->regmap,
+			     chip->int_con[0], chip->irq_masks_cur[0]);
+		regmap_write(chip->regmap,
+			     chip->int_con[1], chip->irq_masks_cur[1]);
+		disable_irq_wake(chip->irq);
+		break;
+
+	default:
+		break;
+	}
+
+	return NOTIFY_DONE;
+}
+
 int mt6397_irq_init(struct mt6397_chip *chip)
 {
 	int ret;
@@ -159,6 +190,7 @@ int mt6397_irq_init(struct mt6397_chip *chip)
 	regmap_write(chip->regmap, chip->int_con[0], 0x0);
 	regmap_write(chip->regmap, chip->int_con[1], 0x0);
 
+	chip->pm_nb.notifier_call = mt6397_irq_pm_notifier;
 	chip->irq_domain = irq_domain_add_linear(chip->dev->of_node,
 						 MT6397_IRQ_NR,
 						 &mt6397_irq_domain_ops,
@@ -177,5 +209,6 @@ int mt6397_irq_init(struct mt6397_chip *chip)
 		return ret;
 	}
 
+	register_pm_notifier(&chip->pm_nb);
 	return 0;
 }

drivers/power/reset/mt6323-poweroff.c

@@ -30,7 +30,7 @@ static void mt6323_do_pwroff(void)
 	int ret;
 
 	regmap_write(pwrc->regmap, pwrc->base + RTC_BBPU, RTC_BBPU_KEY);
-	regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR, 1);
+	regmap_write(pwrc->regmap, pwrc->base + RTC_WRTGR_MT6323, 1);
 
 	ret = regmap_read_poll_timeout(pwrc->regmap,
 					pwrc->base + RTC_BBPU, val,

drivers/power/supply/Kconfig

@@ -541,6 +541,16 @@ config CHARGER_MAX8998
 	  Say Y to enable support for the battery charger control sysfs and
 	  platform data of MAX8998/LP3974 PMICs.
 
+config CHARGER_MP2629
+	tristate "Monolithic power system MP2629 Battery charger"
+	depends on MFD_MP2629
+	depends on MP2629_ADC
+	depends on IIO
+	help
+	  Select this option to enable support for Monolithic power system
+	  Battery charger. This driver provides Battery charger power management
+	  functions on the systems.
+
 config CHARGER_QCOM_SMBB
 	tristate "Qualcomm Switch-Mode Battery Charger and Boost"
 	depends on MFD_SPMI_PMIC || COMPILE_TEST

drivers/power/supply/Makefile

@@ -75,6 +75,7 @@ obj-$(CONFIG_CHARGER_MAX77650)	+= max77650-charger.o
 obj-$(CONFIG_CHARGER_MAX77693)	+= max77693_charger.o
 obj-$(CONFIG_CHARGER_MAX8997)	+= max8997_charger.o
 obj-$(CONFIG_CHARGER_MAX8998)	+= max8998_charger.o
+obj-$(CONFIG_CHARGER_MP2629)	+= mp2629_charger.o
 obj-$(CONFIG_CHARGER_QCOM_SMBB)	+= qcom_smbb.o
 obj-$(CONFIG_CHARGER_BQ2415X)	+= bq2415x_charger.o
 obj-$(CONFIG_CHARGER_BQ24190)	+= bq24190_charger.o

drivers/rtc/rtc-mt6397.c

@@ -9,6 +9,7 @@
 #include <linux/mfd/mt6397/core.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/regmap.h>
 #include <linux/rtc.h>
@@ -20,7 +21,7 @@ static int mtk_rtc_write_trigger(struct mt6397_rtc *rtc)
 	int ret;
 	u32 data;
 
-	ret = regmap_write(rtc->regmap, rtc->addr_base + RTC_WRTGR, 1);
+	ret = regmap_write(rtc->regmap, rtc->addr_base + rtc->data->wrtgr, 1);
 	if (ret < 0)
 		return ret;
 
@@ -269,6 +270,8 @@ static int mtk_rtc_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	rtc->addr_base = res->start;
 
+	rtc->data = of_device_get_match_data(&pdev->dev);
+
 	rtc->irq = platform_get_irq(pdev, 0);
 	if (rtc->irq < 0)
 		return rtc->irq;
@@ -325,9 +328,18 @@ static int mt6397_rtc_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(mt6397_pm_ops, mt6397_rtc_suspend,
 			mt6397_rtc_resume);
 
+static const struct mtk_rtc_data mt6358_rtc_data = {
+	.wrtgr = RTC_WRTGR_MT6358,
+};
+
+static const struct mtk_rtc_data mt6397_rtc_data = {
+	.wrtgr = RTC_WRTGR_MT6397,
+};
+
 static const struct of_device_id mt6397_rtc_of_match[] = {
-	{ .compatible = "mediatek,mt6323-rtc", },
-	{ .compatible = "mediatek,mt6397-rtc", },
+	{ .compatible = "mediatek,mt6323-rtc", .data = &mt6397_rtc_data },
+	{ .compatible = "mediatek,mt6358-rtc", .data = &mt6358_rtc_data },
+	{ .compatible = "mediatek,mt6397-rtc", .data = &mt6397_rtc_data },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, mt6397_rtc_of_match);

include/linux/mfd/gsc.h

+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2020 Gateworks Corporation
+ */
+#ifndef __LINUX_MFD_GSC_H_
+#define __LINUX_MFD_GSC_H_
+
+#include <linux/regmap.h>
+
+/* Device Addresses */
+#define GSC_MISC	0x20
+#define GSC_UPDATE	0x21
+#define GSC_GPIO	0x23
+#define GSC_HWMON	0x29
+#define GSC_EEPROM0	0x50
+#define GSC_EEPROM1	0x51
+#define GSC_EEPROM2	0x52
+#define GSC_EEPROM3	0x53
+#define GSC_RTC		0x68
+
+/* Register offsets */
+enum {
+	GSC_CTRL_0	= 0x00,
+	GSC_CTRL_1	= 0x01,
+	GSC_TIME	= 0x02,
+	GSC_TIME_ADD	= 0x06,
+	GSC_IRQ_STATUS	= 0x0A,
+	GSC_IRQ_ENABLE	= 0x0B,
+	GSC_FW_CRC	= 0x0C,
+	GSC_FW_VER	= 0x0E,
+	GSC_WP		= 0x0F,
+};
+
+/* Bit definitions */
+#define GSC_CTRL_0_PB_HARD_RESET	0
+#define GSC_CTRL_0_PB_CLEAR_SECURE_KEY	1
+#define GSC_CTRL_0_PB_SOFT_POWER_DOWN	2
+#define GSC_CTRL_0_PB_BOOT_ALTERNATE	3
+#define GSC_CTRL_0_PERFORM_CRC		4
+#define GSC_CTRL_0_TAMPER_DETECT	5
+#define GSC_CTRL_0_SWITCH_HOLD		6
+
+#define GSC_CTRL_1_SLEEP_ENABLE		0
+#define GSC_CTRL_1_SLEEP_ACTIVATE	1
+#define GSC_CTRL_1_SLEEP_ADD		2
+#define GSC_CTRL_1_SLEEP_NOWAKEPB	3
+#define GSC_CTRL_1_WDT_TIME		4
+#define GSC_CTRL_1_WDT_ENABLE		5
+#define GSC_CTRL_1_SWITCH_BOOT_ENABLE	6
+#define GSC_CTRL_1_SWITCH_BOOT_CLEAR	7
+
+#define GSC_IRQ_PB			0
+#define GSC_IRQ_KEY_ERASED		1
+#define GSC_IRQ_EEPROM_WP		2
+#define GSC_IRQ_RESV			3
+#define GSC_IRQ_GPIO			4
+#define GSC_IRQ_TAMPER			5
+#define GSC_IRQ_WDT_TIMEOUT		6
+#define GSC_IRQ_SWITCH_HOLD		7
+
+int gsc_read(void *context, unsigned int reg, unsigned int *val);
+int gsc_write(void *context, unsigned int reg, unsigned int val);
+
+struct gsc_dev {
+	struct device *dev;
+
+	struct i2c_client *i2c;		/* 0x20: interrupt controller, WDT */
+	struct i2c_client *i2c_hwmon;	/* 0x29: hwmon, fan controller */
+
+	struct regmap *regmap;
+
+	unsigned int fwver;
+	unsigned short fwcrc;
+};
+
+#endif /* __LINUX_MFD_GSC_H_ */

include/linux/mfd/mp2629.h

+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2020 Monolithic Power Systems, Inc
+ */
+
+#ifndef __MP2629_H__
+#define __MP2629_H__
+
+#include <linux/device.h>
+#include <linux/regmap.h>
+
+struct mp2629_data {
+	struct device *dev;
+	struct regmap *regmap;
+};
+
+enum mp2629_adc_chan {
+	MP2629_BATT_VOLT,
+	MP2629_SYSTEM_VOLT,
+	MP2629_INPUT_VOLT,
+	MP2629_BATT_CURRENT,
+	MP2629_INPUT_CURRENT,
+	MP2629_ADC_CHAN_END
+};
+
+#endif

include/linux/mfd/mt6358/core.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ */
+
+#ifndef __MFD_MT6358_CORE_H__
+#define __MFD_MT6358_CORE_H__
+
+#define MT6358_REG_WIDTH 16
+
+struct irq_top_t {
+	int hwirq_base;
+	unsigned int num_int_regs;
+	unsigned int num_int_bits;
+	unsigned int en_reg;
+	unsigned int en_reg_shift;
+	unsigned int sta_reg;
+	unsigned int sta_reg_shift;
+	unsigned int top_offset;
+};
+
+struct pmic_irq_data {
+	unsigned int num_top;
+	unsigned int num_pmic_irqs;
+	unsigned short top_int_status_reg;
+	bool *enable_hwirq;
+	bool *cache_hwirq;
+};
+
+enum mt6358_irq_top_status_shift {
+	MT6358_BUCK_TOP = 0,
+	MT6358_LDO_TOP,
+	MT6358_PSC_TOP,
+	MT6358_SCK_TOP,
+	MT6358_BM_TOP,
+	MT6358_HK_TOP,
+	MT6358_AUD_TOP,
+	MT6358_MISC_TOP,
+};
+
+enum mt6358_irq_numbers {
+	MT6358_IRQ_VPROC11_OC = 0,
+	MT6358_IRQ_VPROC12_OC,
+	MT6358_IRQ_VCORE_OC,
+	MT6358_IRQ_VGPU_OC,
+	MT6358_IRQ_VMODEM_OC,
+	MT6358_IRQ_VDRAM1_OC,
+	MT6358_IRQ_VS1_OC,
+	MT6358_IRQ_VS2_OC,
+	MT6358_IRQ_VPA_OC,
+	MT6358_IRQ_VCORE_PREOC,
+	MT6358_IRQ_VFE28_OC = 16,
+	MT6358_IRQ_VXO22_OC,
+	MT6358_IRQ_VRF18_OC,
+	MT6358_IRQ_VRF12_OC,
+	MT6358_IRQ_VEFUSE_OC,
+	MT6358_IRQ_VCN33_OC,
+	MT6358_IRQ_VCN28_OC,
+	MT6358_IRQ_VCN18_OC,
+	MT6358_IRQ_VCAMA1_OC,
+	MT6358_IRQ_VCAMA2_OC,
+	MT6358_IRQ_VCAMD_OC,
+	MT6358_IRQ_VCAMIO_OC,
+	MT6358_IRQ_VLDO28_OC,
+	MT6358_IRQ_VA12_OC,
+	MT6358_IRQ_VAUX18_OC,
+	MT6358_IRQ_VAUD28_OC,
+	MT6358_IRQ_VIO28_OC,
+	MT6358_IRQ_VIO18_OC,
+	MT6358_IRQ_VSRAM_PROC11_OC,
+	MT6358_IRQ_VSRAM_PROC12_OC,
+	MT6358_IRQ_VSRAM_OTHERS_OC,
+	MT6358_IRQ_VSRAM_GPU_OC,
+	MT6358_IRQ_VDRAM2_OC,
+	MT6358_IRQ_VMC_OC,
+	MT6358_IRQ_VMCH_OC,
+	MT6358_IRQ_VEMC_OC,
+	MT6358_IRQ_VSIM1_OC,
+	MT6358_IRQ_VSIM2_OC,
+	MT6358_IRQ_VIBR_OC,
+	MT6358_IRQ_VUSB_OC,
+	MT6358_IRQ_VBIF28_OC,
+	MT6358_IRQ_PWRKEY = 48,
+	MT6358_IRQ_HOMEKEY,
+	MT6358_IRQ_PWRKEY_R,
+	MT6358_IRQ_HOMEKEY_R,
+	MT6358_IRQ_NI_LBAT_INT,
+	MT6358_IRQ_CHRDET,
+	MT6358_IRQ_CHRDET_EDGE,
+	MT6358_IRQ_VCDT_HV_DET,
+	MT6358_IRQ_RTC = 64,
+	MT6358_IRQ_FG_BAT0_H = 80,
+	MT6358_IRQ_FG_BAT0_L,
+	MT6358_IRQ_FG_CUR_H,
+	MT6358_IRQ_FG_CUR_L,
+	MT6358_IRQ_FG_ZCV,
+	MT6358_IRQ_FG_BAT1_H,
+	MT6358_IRQ_FG_BAT1_L,
+	MT6358_IRQ_FG_N_CHARGE_L,
+	MT6358_IRQ_FG_IAVG_H,
+	MT6358_IRQ_FG_IAVG_L,
+	MT6358_IRQ_FG_TIME_H,
+	MT6358_IRQ_FG_DISCHARGE,
+	MT6358_IRQ_FG_CHARGE,
+	MT6358_IRQ_BATON_LV = 96,
+	MT6358_IRQ_BATON_HT,
+	MT6358_IRQ_BATON_BAT_IN,
+	MT6358_IRQ_BATON_BAT_OUT,
+	MT6358_IRQ_BIF,
+	MT6358_IRQ_BAT_H = 112,
+	MT6358_IRQ_BAT_L,
+	MT6358_IRQ_BAT2_H,
+	MT6358_IRQ_BAT2_L,
+	MT6358_IRQ_BAT_TEMP_H,
+	MT6358_IRQ_BAT_TEMP_L,
+	MT6358_IRQ_AUXADC_IMP,
+	MT6358_IRQ_NAG_C_DLTV,
+	MT6358_IRQ_AUDIO = 128,
+	MT6358_IRQ_ACCDET = 133,
+	MT6358_IRQ_ACCDET_EINT0,
+	MT6358_IRQ_ACCDET_EINT1,
+	MT6358_IRQ_SPI_CMD_ALERT = 144,
+	MT6358_IRQ_NR,
+};
+
+#define MT6358_IRQ_BUCK_BASE MT6358_IRQ_VPROC11_OC
+#define MT6358_IRQ_LDO_BASE MT6358_IRQ_VFE28_OC
+#define MT6358_IRQ_PSC_BASE MT6358_IRQ_PWRKEY
+#define MT6358_IRQ_SCK_BASE MT6358_IRQ_RTC
+#define MT6358_IRQ_BM_BASE MT6358_IRQ_FG_BAT0_H
+#define MT6358_IRQ_HK_BASE MT6358_IRQ_BAT_H
+#define MT6358_IRQ_AUD_BASE MT6358_IRQ_AUDIO
+#define MT6358_IRQ_MISC_BASE MT6358_IRQ_SPI_CMD_ALERT
+
+#define MT6358_IRQ_BUCK_BITS (MT6358_IRQ_VCORE_PREOC - MT6358_IRQ_BUCK_BASE + 1)
+#define MT6358_IRQ_LDO_BITS (MT6358_IRQ_VBIF28_OC - MT6358_IRQ_LDO_BASE + 1)
+#define MT6358_IRQ_PSC_BITS (MT6358_IRQ_VCDT_HV_DET - MT6358_IRQ_PSC_BASE + 1)
+#define MT6358_IRQ_SCK_BITS (MT6358_IRQ_RTC - MT6358_IRQ_SCK_BASE + 1)
+#define MT6358_IRQ_BM_BITS (MT6358_IRQ_BIF - MT6358_IRQ_BM_BASE + 1)
+#define MT6358_IRQ_HK_BITS (MT6358_IRQ_NAG_C_DLTV - MT6358_IRQ_HK_BASE + 1)
+#define MT6358_IRQ_AUD_BITS (MT6358_IRQ_ACCDET_EINT1 - MT6358_IRQ_AUD_BASE + 1)
+#define MT6358_IRQ_MISC_BITS	\
+	(MT6358_IRQ_SPI_CMD_ALERT - MT6358_IRQ_MISC_BASE + 1)
+
+#define MT6358_TOP_GEN(sp)	\
+{	\
+	.hwirq_base = MT6358_IRQ_##sp##_BASE,	\
+	.num_int_regs =	\
+		((MT6358_IRQ_##sp##_BITS - 1) / MT6358_REG_WIDTH) + 1,	\
+	.num_int_bits = MT6358_IRQ_##sp##_BITS, \
+	.en_reg = MT6358_##sp##_TOP_INT_CON0,	\
+	.en_reg_shift = 0x6,	\
+	.sta_reg = MT6358_##sp##_TOP_INT_STATUS0,	\
+	.sta_reg_shift = 0x2,	\
+	.top_offset = MT6358_##sp##_TOP,	\
+}
+
+#endif /* __MFD_MT6358_CORE_H__ */

include/linux/mfd/mt6397/core.h

@@ -8,9 +8,11 @@
 #define __MFD_MT6397_CORE_H__
 
 #include <linux/mutex.h>
+#include <linux/notifier.h>
 
 enum chip_id {
 	MT6323_CHIP_ID = 0x23,
+	MT6358_CHIP_ID = 0x58,
 	MT6391_CHIP_ID = 0x91,
 	MT6397_CHIP_ID = 0x97,
 };
@@ -54,6 +56,7 @@ enum mt6397_irq_numbers {
 struct mt6397_chip {
 	struct device *dev;
 	struct regmap *regmap;
+	struct notifier_block pm_nb;
 	int irq;
 	struct irq_domain *irq_domain;
 	struct mutex irqlock;
@@ -63,8 +66,10 @@ struct mt6397_chip {
 	u16 int_con[2];
 	u16 int_status[2];
 	u16 chip_id;
+	void *irq_data;
 };
 
+int mt6358_irq_init(struct mt6397_chip *chip);
 int mt6397_irq_init(struct mt6397_chip *chip);
 
 #endif /* __MFD_MT6397_CORE_H__ */

include/linux/mfd/mt6397/rtc.h

@@ -18,7 +18,9 @@
 #define RTC_BBPU_CBUSY         BIT(6)
 #define RTC_BBPU_KEY            (0x43 << 8)
 
-#define RTC_WRTGR              0x003c
+#define RTC_WRTGR_MT6358       0x003a
+#define RTC_WRTGR_MT6397       0x003c
+#define RTC_WRTGR_MT6323       RTC_WRTGR_MT6397
 
 #define RTC_IRQ_STA            0x0002
 #define RTC_IRQ_STA_AL         BIT(0)
@@ -65,6 +67,10 @@
 #define MTK_RTC_POLL_DELAY_US  10
 #define MTK_RTC_POLL_TIMEOUT   (jiffies_to_usecs(HZ))
 
+struct mtk_rtc_data {
+	u32                     wrtgr;
+};
+
 struct mt6397_rtc {
 	struct device           *dev;
 	struct rtc_device       *rtc_dev;
@@ -74,6 +80,7 @@ struct mt6397_rtc {
 	struct regmap           *regmap;
 	int                     irq;
 	u32                     addr_base;
+	const struct mtk_rtc_data *data;
 };
 
 #endif /* _LINUX_MFD_MT6397_RTC_H_ */

include/linux/platform_data/gsc_hwmon.h

+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _GSC_HWMON_H
+#define _GSC_HWMON_H
+
+enum gsc_hwmon_mode {
+	mode_temperature,
+	mode_voltage,
+	mode_voltage_raw,
+	mode_max,
+};
+
+/**
+ * struct gsc_hwmon_channel - configuration parameters
+ * @reg:  I2C register offset
+ * @mode: channel mode
+ * @name: channel name
+ * @mvoffset: voltage offset
+ * @vdiv: voltage divider array (2 resistor values in milli-ohms)
+ */
+struct gsc_hwmon_channel {
+	unsigned int reg;
+	unsigned int mode;
+	const char *name;
+	unsigned int mvoffset;
+	unsigned int vdiv[2];
+};
+
+/**
+ * struct gsc_hwmon_platform_data - platform data for gsc_hwmon driver
+ * @channels:	pointer to array of gsc_hwmon_channel structures
+ *		describing channels
+ * @nchannels:	number of elements in @channels array
+ * @vreference: voltage reference (mV)
+ * @resolution: ADC bit resolution
+ * @fan_base: register base for FAN controller
+ */
+struct gsc_hwmon_platform_data {
+	const struct gsc_hwmon_channel *channels;
+	int nchannels;
+	unsigned int resolution;
+	unsigned int vreference;
+	unsigned int fan_base;
+};
+#endif