Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus

Documentation/mips/AU1xxx_IDE.README

+README for MIPS AU1XXX IDE driver - Released 2005-07-15
+
+ABOUT
+-----
+This file describes the 'drivers/ide/mips/au1xxx-ide.c', related files and the
+services they provide.
+
+If you are short in patience and just want to know how to add your hard disc to
+the white or black list, go to the 'ADD NEW HARD DISC TO WHITE OR BLACK LIST'
+section.
+
+
+LICENSE
+-------
+
+Copyright (c) 2003-2005 AMD, Personal Connectivity Solutions
+
+This program is free software; you can redistribute it and/or modify it under
+the terms of the GNU General Public License as published by the Free Software
+Foundation; either version 2 of the License, or (at your option) any later
+version.
+
+THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
+INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
+BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc.,
+675 Mass Ave, Cambridge, MA 02139, USA.
+
+Note: for more information, please refer "AMD Alchemy Au1200/Au1550 IDE
+      Interface and Linux Device Driver" Application Note.
+
+
+FILES, CONFIGS AND COMPATABILITY
+--------------------------------
+
+Two files are introduced:
+
+  a) 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
+     containes : struct _auide_hwif
+                 struct drive_list_entry dma_white_list
+                 struct drive_list_entry dma_black_list
+                 timing parameters for PIO mode 0/1/2/3/4
+                 timing parameters for MWDMA 0/1/2
+
+  b) 'drivers/ide/mips/au1xxx-ide.c'
+     contains the functionality of the AU1XXX IDE driver
+
+Four configs variables are introduced:
+
+  CONFIG_BLK_DEV_IDE_AU1XXX_PIO_DBDMA    - enable the PIO+DBDMA mode
+  CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA  - enable the MWDMA mode
+  CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON - set Burstable FIFO in DBDMA
+                                           controler
+  CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ - maximum transfer size
+                                           per descriptor
+
+If MWDMA is enabled and the connected hard disc is not on the white list, the
+kernel switches to a "safe mwdma mode" at boot time. In this mode the IDE
+performance is substantial slower then in full speed mwdma. In this case
+please add your hard disc to the white list (follow instruction from 'ADD NEW
+HARD DISC TO WHITE OR BLACK LIST' section).
+
+
+SUPPORTED IDE MODES
+-------------------
+
+The AU1XXX IDE driver supported all PIO modes - PIO mode 0/1/2/3/4 - and all
+MWDMA modes - MWDMA 0/1/2 -. There is no support for SWDMA and UDMA mode.
+
+To change the PIO mode use the program hdparm with option -p, e.g.
+'hdparm -p0 [device]' for PIO mode 0. To enable the MWDMA mode use the option
+-X, e.g. 'hdparm -X32 [device]' for MWDMA mode 0.
+
+
+PERFORMANCE CONFIGURATIONS
+--------------------------
+
+If the used system doesn't need USB support enable the following kernel configs:
+
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDE=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+CONFIG_IDEDMA_PCI_AUTO=y
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
+CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON=y
+CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_IDEDMA_AUTO=y
+
+If the used system need the USB support enable the following kernel configs for
+high IDE to USB throughput.
+
+CONFIG_BLK_DEV_IDEDISK=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_IDEPCI=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_IDEDMA_PCI=y
+CONFIG_IDEDMA_PCI_AUTO=y
+CONFIG_BLK_DEV_IDE_AU1XXX=y
+CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA=y
+CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQ=128
+CONFIG_BLK_DEV_IDEDMA=y
+CONFIG_IDEDMA_AUTO=y
+
+
+ADD NEW HARD DISC TO WHITE OR BLACK LIST
+----------------------------------------
+
+Step 1 : detect the model name of your hard disc
+
+  a) connect your hard disc to the AU1XXX
+
+  b) boot your kernel and get the hard disc model.
+
+     Example boot log:
+
+     --snipped--
+     Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
+     ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
+     Au1xxx IDE(builtin) configured for MWDMA2
+     Probing IDE interface ide0...
+     hda: Maxtor 6E040L0, ATA DISK drive
+     ide0 at 0xac800000-0xac800007,0xac8001c0 on irq 64
+     hda: max request size: 64KiB
+     hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=65535/16/63, (U)DMA
+     --snipped--
+
+     In this example 'Maxtor 6E040L0'.
+
+Step  2 : edit 'include/asm-mips/mach-au1x00/au1xxx_ide.h'
+
+  Add your hard disc to the dma_white_list or dma_black_list structur.
+
+Step 3 : Recompile the kernel
+
+  Enable MWDMA support in the kernel configuration. Recompile the kernel and
+  reboot.
+
+Step 4 : Tests
+
+  If you have add a hard disc to the white list, please run some stress tests
+  for verification.
+
+
+ACKNOWLEDGMENTS
+---------------
+
+These drivers wouldn't have been done without the base of kernel 2.4.x AU1XXX
+IDE driver from AMD.
+
+Additional input also from:
+Matthias Lenk <matthias.lenk@amd.com>
+
+Happy hacking!
+Enrico Walther <enrico.walther@amd.com>

MAINTAINERS

@@ -1643,7 +1643,7 @@ S:	Maintained
 MIPS
 P:	Ralf Baechle
 M:	ralf@linux-mips.org
-W:	http://oss.sgi.com/mips/mips-howto.html
+W:	http://www.linux-mips.org/
 L:	linux-mips@linux-mips.org
 S:	Maintained
 

arch/mips/Makefile

@@ -52,6 +52,21 @@ ifdef CONFIG_CROSSCOMPILE
 CROSS_COMPILE		:= $(tool-prefix)
 endif
 
+CHECKFLAGS-y				+= -D__linux__ -D__mips__ \
+					   -D_ABIO32=1 \
+					   -D_ABIN32=2 \
+					   -D_ABI64=3
+CHECKFLAGS-$(CONFIG_32BIT)		+= -D_MIPS_SIM=_ABIO32 \
+					   -D_MIPS_SZLONG=32 \
+					   -D__PTRDIFF_TYPE__=int
+CHECKFLAGS-$(CONFIG_64BIT)		+= -m64 -D_MIPS_SIM=_ABI64 \
+					   -D_MIPS_SZLONG=64 \
+					   -D__PTRDIFF_TYPE__="long int"
+CHECKFLAGS-$(CONFIG_CPU_BIG_ENDIAN)	+= -D__MIPSEB__
+CHECKFLAGS-$(CONFIG_CPU_LITTLE_ENDIAN)	+= -D__MIPSEL__
+
+CHECKFLAGS				= $(CHECKFLAGS-y)
+
 ifdef CONFIG_BUILD_ELF64
 gas-abi			= 64
 ld-emul			= $(64bit-emul)
@@ -79,9 +94,18 @@ endif
 cflags-y			+= -I $(TOPDIR)/include/asm/gcc
 cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
 cflags-y			+= $(call cc-option, -finline-limit=100000)
-LDFLAGS_vmlinux			+= -G 0 -static -n
+LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
 MODFLAGS			+= -mlong-calls
 
+#
+# We explicitly add the endianness specifier if needed, this allows
+# to compile kernels with a toolchain for the other endianness. We
+# carefully avoid to add it redundantly because gcc 3.3/3.4 complains
+# when fed the toolchain default!
+#
+cflags-$(CONFIG_CPU_BIG_ENDIAN)		+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' && echo -EB)
+cflags-$(CONFIG_CPU_LITTLE_ENDIAN)	+= $(shell $(CC) -dumpmachine |grep -q 'mips.*el-.*' || echo -EL)
+
 cflags-$(CONFIG_SB1XXX_CORELIS)	+= -mno-sched-prolog -fno-omit-frame-pointer
 
 #
@@ -167,14 +191,22 @@ cflags-$(CONFIG_CPU_TX49XX)	+= \
 			$(call set_gccflags,r4600,mips3,r4600,mips3,mips2)  \
 			-Wa,--trap
 
-cflags-$(CONFIG_CPU_MIPS32)	+= \
+cflags-$(CONFIG_CPU_MIPS32_R1)	+= \
 			$(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
 			-Wa,--trap
 
-cflags-$(CONFIG_CPU_MIPS64)	+= \
+cflags-$(CONFIG_CPU_MIPS32_R2)	+= \
+			$(call set_gccflags,mips32r2,mips32r2,r4600,mips3,mips2) \
+			-Wa,--trap
+
+cflags-$(CONFIG_CPU_MIPS64_R1)	+= \
 			$(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
 			-Wa,--trap
 
+cflags-$(CONFIG_CPU_MIPS64_R2)	+= \
+			$(call set_gccflags,mips64r2,mips64r2,r4600,mips3,mips2) \
+			-Wa,--trap
+
 cflags-$(CONFIG_CPU_R5000)	+= \
 			$(call set_gccflags,r5000,mips4,r5000,mips4,mips2) \
 			-Wa,--trap
@@ -196,6 +228,7 @@ cflags-$(CONFIG_CPU_RM9000)	+= \
 			$(call set_gccflags,rm9000,mips4,r5000,mips4,mips2) \
 			-Wa,--trap
 
+
 cflags-$(CONFIG_CPU_SB1)	+= \
 			$(call set_gccflags,sb1,mips64,r5000,mips4,mips2) \
 			-Wa,--trap
@@ -265,6 +298,13 @@ libs-$(CONFIG_MIPS_PB1550)	+= arch/mips/au1000/pb1550/
 cflags-$(CONFIG_MIPS_PB1550)	+= -Iinclude/asm-mips/mach-pb1x00
 load-$(CONFIG_MIPS_PB1550)	+= 0xffffffff80100000
 
+#
+# AMD Alchemy Pb1200 eval board
+#
+libs-$(CONFIG_MIPS_PB1200)	+= arch/mips/au1000/pb1200/
+cflags-$(CONFIG_MIPS_PB1200)	+= -Iinclude/asm-mips/mach-pb1x00
+load-$(CONFIG_MIPS_PB1200)	+= 0xffffffff80100000
+
 #
 # AMD Alchemy Db1000 eval board
 #
@@ -293,6 +333,13 @@ libs-$(CONFIG_MIPS_DB1550)	+= arch/mips/au1000/db1x00/
 cflags-$(CONFIG_MIPS_DB1550)	+= -Iinclude/asm-mips/mach-db1x00
 load-$(CONFIG_MIPS_DB1550)	+= 0xffffffff80100000
 
+#
+# AMD Alchemy Db1200 eval board
+#
+libs-$(CONFIG_MIPS_DB1200)	+= arch/mips/au1000/pb1200/
+cflags-$(CONFIG_MIPS_DB1200)	+= -Iinclude/asm-mips/mach-db1x00
+load-$(CONFIG_MIPS_DB1200)	+= 0xffffffff80100000
+
 #
 # AMD Alchemy Bosporus eval board
 #
@@ -323,6 +370,7 @@ load-$(CONFIG_MIPS_XXS1500)	+= 0xffffffff80100000
 # Cobalt Server
 #
 core-$(CONFIG_MIPS_COBALT)	+= arch/mips/cobalt/
+cflags-$(CONFIG_MIPS_COBALT)	+= -Iinclude/asm-mips/cobalt
 load-$(CONFIG_MIPS_COBALT)	+= 0xffffffff80080000
 
 #
@@ -388,6 +436,13 @@ load-$(CONFIG_MIPS_MALTA)	+= 0xffffffff80100000
 core-$(CONFIG_MIPS_SEAD)	+= arch/mips/mips-boards/sead/
 load-$(CONFIG_MIPS_SEAD)	+= 0xffffffff80100000
 
+#
+# MIPS SIM
+#
+core-$(CONFIG_MIPS_SIM)		+= arch/mips/mips-boards/sim/
+cflags-$(CONFIG_MIPS_SIM)	+= -Iinclude/asm-mips/mach-sim
+load-$(CONFIG_MIPS_SIM)		+= 0x80100000
+
 #
 # Momentum Ocelot board
 #
@@ -513,6 +568,19 @@ load-$(CONFIG_CASIO_E55)	+= 0xffffffff80004000
 #
 load-$(CONFIG_TANBAC_TB022X)	+= 0xffffffff80000000
 
+#
+# Common Philips PNX8550
+#
+core-$(CONFIG_SOC_PNX8550)	+= arch/mips/philips/pnx8550/common/
+cflags-$(CONFIG_SOC_PNX8550)	+= -Iinclude/asm-mips/mach-pnx8550
+
+#
+# Philips PNX8550 JBS board
+#
+libs-$(CONFIG_PNX8550_JBS)	+= arch/mips/philips/pnx8550/jbs/
+#cflags-$(CONFIG_PNX8550_JBS)	+= -Iinclude/asm-mips/mach-pnx8550
+load-$(CONFIG_PNX8550_JBS)	+= 0xffffffff80060000
+
 #
 # SGI IP22 (Indy/Indigo2)
 #
@@ -582,10 +650,20 @@ load-$(CONFIG_SGI_IP32)		+= 0xffffffff80004000
 # removed (as happens, even if they have __initcall/module_init)
 #
 core-$(CONFIG_SIBYTE_BCM112X)	+= arch/mips/sibyte/sb1250/
-cflags-$(CONFIG_SIBYTE_BCM112X)	+= -Iinclude/asm-mips/mach-sibyte
+cflags-$(CONFIG_SIBYTE_BCM112X)	+= -Iinclude/asm-mips/mach-sibyte \
+			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
 
 core-$(CONFIG_SIBYTE_SB1250)	+= arch/mips/sibyte/sb1250/
-cflags-$(CONFIG_SIBYTE_SB1250)	+= -Iinclude/asm-mips/mach-sibyte
+cflags-$(CONFIG_SIBYTE_SB1250)	+= -Iinclude/asm-mips/mach-sibyte \
+			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL
+
+core-$(CONFIG_SIBYTE_BCM1x55)	+= arch/mips/sibyte/bcm1480/
+cflags-$(CONFIG_SIBYTE_BCM1x55)	+= -Iinclude/asm-mips/mach-sibyte \
+			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
+
+core-$(CONFIG_SIBYTE_BCM1x80)	+= arch/mips/sibyte/bcm1480/
+cflags-$(CONFIG_SIBYTE_BCM1x80)	+= -Iinclude/asm-mips/mach-sibyte \
+			-DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL
 
 #
 # Sibyte BCM91120x (Carmel) board
@@ -593,6 +671,7 @@ cflags-$(CONFIG_SIBYTE_SB1250)	+= -Iinclude/asm-mips/mach-sibyte
 # Sibyte BCM91125C (CRhone) board
 # Sibyte BCM91125E (Rhone) board
 # Sibyte SWARM board
+# Sibyte BCM91x80 (BigSur) board
 #
 libs-$(CONFIG_SIBYTE_CARMEL)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_CARMEL)	:= 0xffffffff80100000
@@ -606,6 +685,8 @@ libs-$(CONFIG_SIBYTE_SENTOSA)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_SENTOSA)	:= 0xffffffff80100000
 libs-$(CONFIG_SIBYTE_SWARM)	+= arch/mips/sibyte/swarm/
 load-$(CONFIG_SIBYTE_SWARM)	:= 0xffffffff80100000
+libs-$(CONFIG_SIBYTE_BIGSUR)	+= arch/mips/sibyte/swarm/
+load-$(CONFIG_SIBYTE_BIGSUR)	:= 0xffffffff80100000
 
 #
 # SNI RM200 PCI
@@ -629,6 +710,13 @@ core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/toshiba_rbtx4927/
 core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/mips/tx4927/common/
 load-$(CONFIG_TOSHIBA_RBTX4927)	+= 0xffffffff80020000
 
+#
+# Toshiba RBTX4938 board
+#
+core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/toshiba_rbtx4938/
+core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/tx4938/common/
+load-$(CONFIG_TOSHIBA_RBTX4938) += 0xffffffff80100000
+
 cflags-y			+= -Iinclude/asm-mips/mach-generic
 drivers-$(CONFIG_PCI)		+= arch/mips/pci/
 
@@ -701,10 +789,29 @@ ifdef CONFIG_BOOT_ELF64
 all:	$(vmlinux-64)
 endif
 
+ifdef CONFIG_MIPS_ATLAS
+all:	vmlinux.srec
+endif
+
+ifdef CONFIG_MIPS_MALTA
+all:	vmlinux.srec
+endif
+
+ifdef CONFIG_MIPS_SEAD
+all:	vmlinux.srec
+endif
+
+ifdef CONFIG_QEMU
+all:	vmlinux.bin
+endif
+
 ifdef CONFIG_SNI_RM200_PCI
 all:	vmlinux.ecoff
 endif
 
+vmlinux.bin: $(vmlinux-32)
+	+@$(call makeboot,$@)
+
 vmlinux.ecoff vmlinux.rm200: $(vmlinux-32)
 	+@$(call makeboot,$@)
 
@@ -720,7 +827,6 @@ archclean:
 	@$(MAKE) $(clean)=arch/mips/boot
 	@$(MAKE) $(clean)=arch/mips/lasat
 
-
 CLEAN_FILES += vmlinux.32 \
 	       vmlinux.64 \
 	       vmlinux.ecoff

arch/mips/arc/Makefile

@@ -3,7 +3,7 @@
 #
 
 lib-y				+= cmdline.o env.o file.o identify.o init.o \
-				   misc.o time.o tree.o
+				   misc.o salone.o time.o tree.o
 
 lib-$(CONFIG_ARC_MEMORY)	+= memory.o
 lib-$(CONFIG_ARC_CONSOLE)	+= arc_con.o

arch/mips/arc/identify.c

@@ -44,6 +44,11 @@ static struct smatch mach_table[] = {
 		MACH_GROUP_SGI,
 		MACH_SGI_IP28,
 		PROM_FLAG_ARCS
+	}, {	"SGI-IP30",
+		"SGI Octane",
+		MACH_GROUP_SGI,
+		MACH_SGI_IP30,
+		PROM_FLAG_ARCS
 	}, {	"SGI-IP32",
 		"SGI O2",
 		MACH_GROUP_SGI,

arch/mips/au1000/common/Makefile

@@ -8,7 +8,7 @@
 
 obj-y += prom.o int-handler.o irq.o puts.o time.o reset.o \
 	au1xxx_irqmap.o clocks.o platform.o power.o setup.o \
-	sleeper.o cputable.o dma.o dbdma.o
+	sleeper.o cputable.o dma.o dbdma.o gpio.o
 
 obj-$(CONFIG_AU1X00_USB_DEVICE)	+= usbdev.o
 obj-$(CONFIG_KGDB)		+= dbg_io.o

arch/mips/au1000/common/au1xxx_irqmap.c

@@ -173,14 +173,14 @@ au1xxx_irq_map_t au1xxx_ic0_map[] = {
 	{ AU1550_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1550_PSC2_INT, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1550_PSC3_INT, INTC_INT_HIGH_LEVEL, 0},
-	{ AU1550_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-	{ AU1550_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1550_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
+	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
 	{ AU1550_NAND_INT, INTC_INT_RISE_EDGE, 0},
 	{ AU1550_USB_DEV_REQ_INT, INTC_INT_HIGH_LEVEL, 0 },
 	{ AU1550_USB_DEV_SUS_INT, INTC_INT_RISE_EDGE, 0 },
@@ -201,14 +201,14 @@ au1xxx_irq_map_t au1xxx_ic0_map[] = {
 	{ AU1200_PSC1_INT, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1200_AES_INT, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1200_CAMERA_INT, INTC_INT_HIGH_LEVEL, 0},
-	{ AU1200_TOY_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
-	{ AU1200_RTC_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
-	{ AU1200_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_TOY_MATCH2_INT, INTC_INT_RISE_EDGE, 1 },
+	{ AU1000_RTC_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH0_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH1_INT, INTC_INT_RISE_EDGE, 0 },
+	{ AU1000_RTC_MATCH2_INT, INTC_INT_RISE_EDGE, 0 },
 	{ AU1200_NAND_INT, INTC_INT_RISE_EDGE, 0},
 	{ AU1200_USB_INT, INTC_INT_HIGH_LEVEL, 0 },
 	{ AU1200_LCD_INT, INTC_INT_HIGH_LEVEL, 0},

arch/mips/au1000/common/cputable.c

@@ -37,7 +37,8 @@ struct cpu_spec	cpu_specs[] = {
     { 0xffffffff, 0x02030203, "Au1100 BD", 0, 1 },
     { 0xffffffff, 0x02030204, "Au1100 BE", 0, 1 },
     { 0xffffffff, 0x03030200, "Au1550 AA", 0, 1 },
-    { 0xffffffff, 0x04030200, "Au1200 AA", 0, 1 },
+    { 0xffffffff, 0x04030200, "Au1200 AB", 0, 0 },
+    { 0xffffffff, 0x04030201, "Au1200 AC", 0, 1 },
     { 0x00000000, 0x00000000, "Unknown Au1xxx", 1, 0 },
 };
 

arch/mips/au1000/common/dma.c

@@ -39,7 +39,6 @@
 #include <linux/string.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
-#include <linux/module.h>
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 #include <asm/mach-au1x00/au1000_dma.h>

arch/mips/au1000/common/gpio.c

+/*
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <au1000.h>
+#include <au1xxx_gpio.h>
+
+#define gpio1 sys
+#if !defined(CONFIG_SOC_AU1000)
+static AU1X00_GPIO2 * const gpio2 = (AU1X00_GPIO2 *)GPIO2_BASE;
+
+#define GPIO2_OUTPUT_ENABLE_MASK 0x00010000
+
+int au1xxx_gpio2_read(int signal)
+{
+	signal -= 200;
+/*	gpio2->dir &= ~(0x01 << signal);						//Set GPIO to input */
+	return ((gpio2->pinstate >> signal) & 0x01);
+}
+
+void au1xxx_gpio2_write(int signal, int value)
+{
+	signal -= 200;
+
+	gpio2->output = (GPIO2_OUTPUT_ENABLE_MASK << signal) |
+		(value << signal);
+}
+
+void au1xxx_gpio2_tristate(int signal)
+{
+	signal -= 200;
+	gpio2->dir &= ~(0x01 << signal); 	/* Set GPIO to input */
+}
+#endif
+
+int au1xxx_gpio1_read(int signal)
+{
+/*	gpio1->trioutclr |= (0x01 << signal); */
+	return ((gpio1->pinstaterd >> signal) & 0x01);
+}
+
+void au1xxx_gpio1_write(int signal, int value)
+{
+	if(value)
+		gpio1->outputset = (0x01 << signal);
+	else
+		gpio1->outputclr = (0x01 << signal);	/* Output a Zero */
+}
+
+void au1xxx_gpio1_tristate(int signal)
+{
+	gpio1->trioutclr = (0x01 << signal);		/* Tristate signal */
+}
+
+
+int au1xxx_gpio_read(int signal)
+{
+	if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+		return 0;
+#else
+		return au1xxx_gpio2_read(signal);
+#endif
+	else
+		return au1xxx_gpio1_read(signal);
+}
+
+void au1xxx_gpio_write(int signal, int value)
+{
+	if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+		;
+#else
+		au1xxx_gpio2_write(signal, value);
+#endif
+	else
+		au1xxx_gpio1_write(signal, value);
+}
+
+void au1xxx_gpio_tristate(int signal)
+{
+	if(signal >= 200)
+#if defined(CONFIG_SOC_AU1000)
+		;
+#else
+		au1xxx_gpio2_tristate(signal);
+#endif
+	else
+		au1xxx_gpio1_tristate(signal);
+}
+
+void au1xxx_gpio1_set_inputs(void)
+{
+	gpio1->pininputen = 0;
+}
+
+EXPORT_SYMBOL(au1xxx_gpio1_set_inputs);
+EXPORT_SYMBOL(au1xxx_gpio_tristate);
+EXPORT_SYMBOL(au1xxx_gpio_write);
+EXPORT_SYMBOL(au1xxx_gpio_read);

arch/mips/au1000/common/irq.c

@@ -83,7 +83,7 @@ inline void local_disable_irq(unsigned int irq_nr);
 void	(*board_init_irq)(void);
 
 #ifdef CONFIG_PM
-extern void counter0_irq(int irq, void *dev_id, struct pt_regs *regs);
+extern irqreturn_t counter0_irq(int irq, void *dev_id, struct pt_regs *regs);
 #endif
 
 static DEFINE_SPINLOCK(irq_lock);
@@ -253,52 +253,72 @@ void restore_local_and_enable(int controller, unsigned long mask)
 
 
 static struct hw_interrupt_type rise_edge_irq_type = {
-	"Au1000 Rise Edge",
-	startup_irq,
-	shutdown_irq,
-	local_enable_irq,
-	local_disable_irq,
-	mask_and_ack_rise_edge_irq,
-	end_irq,
-	NULL
+	.typename = "Au1000 Rise Edge",
+	.startup = startup_irq,
+	.shutdown = shutdown_irq,
+	.enable = local_enable_irq,
+	.disable = local_disable_irq,
+	.ack = mask_and_ack_rise_edge_irq,
+	.end = end_irq,
 };
 
 static struct hw_interrupt_type fall_edge_irq_type = {
-	"Au1000 Fall Edge",
-	startup_irq,
-	shutdown_irq,
-	local_enable_irq,
-	local_disable_irq,
-	mask_and_ack_fall_edge_irq,
-	end_irq,
-	NULL
+	.typename = "Au1000 Fall Edge",
+	.startup = startup_irq,
+	.shutdown = shutdown_irq,
+	.enable = local_enable_irq,
+	.disable = local_disable_irq,
+	.ack = mask_and_ack_fall_edge_irq,
+	.end = end_irq,
 };
 
 static struct hw_interrupt_type either_edge_irq_type = {
-	"Au1000 Rise or Fall Edge",
-	startup_irq,
-	shutdown_irq,
-	local_enable_irq,
-	local_disable_irq,
-	mask_and_ack_either_edge_irq,
-	end_irq,
-	NULL
+	.typename = "Au1000 Rise or Fall Edge",
+	.startup = startup_irq,
+	.shutdown = shutdown_irq,
+	.enable = local_enable_irq,
+	.disable = local_disable_irq,
+	.ack = mask_and_ack_either_edge_irq,
+	.end = end_irq,
 };
 
 static struct hw_interrupt_type level_irq_type = {
-	"Au1000 Level",
-	startup_irq,
-	shutdown_irq,
-	local_enable_irq,
-	local_disable_irq,
-	mask_and_ack_level_irq,
-	end_irq,
-	NULL
+	.typename = "Au1000 Level",
+	.startup = startup_irq,
+	.shutdown = shutdown_irq,
+	.enable = local_enable_irq,
+	.disable = local_disable_irq,
+	.ack = mask_and_ack_level_irq,
+	.end = end_irq,
 };
 
 #ifdef CONFIG_PM
-void startup_match20_interrupt(void)
+void startup_match20_interrupt(irqreturn_t (*handler)(int, void *, struct pt_regs *))
 {
+	struct irq_desc *desc = &irq_desc[AU1000_TOY_MATCH2_INT];
+
+	static struct irqaction action;
+	memset(&action, 0, sizeof(struct irqaction));
+
+	/* This is a big problem.... since we didn't use request_irq
+	 * when kernel/irq.c calls probe_irq_xxx this interrupt will
+	 * be probed for usage. This will end up disabling the device :(
+	 * Give it a bogus "action" pointer -- this will keep it from
+	 * getting auto-probed!
+	 *
+	 * By setting the status to match that of request_irq() we
+	 * can avoid it.  --cgray
+	*/
+	action.dev_id = handler;
+	action.flags = SA_INTERRUPT;
+	cpus_clear(action.mask);
+	action.name = "Au1xxx TOY";
+	action.handler = handler;
+	action.next = NULL;
+
+	desc->action = &action;
+	desc->status &= ~(IRQ_DISABLED | IRQ_AUTODETECT | IRQ_WAITING | IRQ_INPROGRESS);
+
 	local_enable_irq(AU1000_TOY_MATCH2_INT);
 }
 #endif
@@ -426,7 +446,6 @@ void __init arch_init_irq(void)
 	extern int au1xxx_ic0_nr_irqs;
 
 	cp0_status = read_c0_status();
-	memset(irq_desc, 0, sizeof(irq_desc));
 	set_except_vector(0, au1000_IRQ);
 
 	/* Initialize interrupt controllers to a safe state.
@@ -492,7 +511,7 @@ void intc0_req0_irqdispatch(struct pt_regs *regs)
 	intc0_req0 |= au_readl(IC0_REQ0INT);
 
 	if (!intc0_req0) return;
-
+#ifdef AU1000_USB_DEV_REQ_INT
 	/*
 	 * Because of the tight timing of SETUP token to reply
 	 * transactions, the USB devices-side packet complete
@@ -503,7 +522,7 @@ void intc0_req0_irqdispatch(struct pt_regs *regs)
 		do_IRQ(AU1000_USB_DEV_REQ_INT, regs);
 		return;
 	}
-
+#endif
 	irq = au_ffs(intc0_req0) - 1;
 	intc0_req0 &= ~(1<<irq);
 	do_IRQ(irq, regs);
@@ -521,17 +540,7 @@ void intc0_req1_irqdispatch(struct pt_regs *regs)
 
 	irq = au_ffs(intc0_req1) - 1;
 	intc0_req1 &= ~(1<<irq);
-#ifdef CONFIG_PM
-	if (irq == AU1000_TOY_MATCH2_INT) {
-		mask_and_ack_rise_edge_irq(irq);
-		counter0_irq(irq, NULL, regs);
-		local_enable_irq(irq);
-	}
-	else
-#endif
-	{
-		do_IRQ(irq, regs);
-	}
+	do_IRQ(irq, regs);
 }
 
 

arch/mips/au1000/common/platform.c

@@ -7,13 +7,15 @@
  * License version 2.  This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+#include <linux/config.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/resource.h>
 
-#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx.h>
 
+/* OHCI (USB full speed host controller) */
 static struct resource au1xxx_usb_ohci_resources[] = {
 	[0] = {
 		.start		= USB_OHCI_BASE,
@@ -41,8 +43,252 @@ static struct platform_device au1xxx_usb_ohci_device = {
 	.resource	= au1xxx_usb_ohci_resources,
 };
 
+/*** AU1100 LCD controller ***/
+
+#ifdef CONFIG_FB_AU1100
+static struct resource au1100_lcd_resources[] = {
+	[0] = {
+		.start          = LCD_PHYS_ADDR,
+		.end            = LCD_PHYS_ADDR + 0x800 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start          = AU1100_LCD_INT,
+		.end            = AU1100_LCD_INT,
+		.flags          = IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1100_lcd_dmamask = ~(u32)0;
+
+static struct platform_device au1100_lcd_device = {
+	.name           = "au1100-lcd",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = &au1100_lcd_dmamask,
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(au1100_lcd_resources),
+	.resource       = au1100_lcd_resources,
+};
+#endif
+
+#ifdef CONFIG_SOC_AU1200
+/* EHCI (USB high speed host controller) */
+static struct resource au1xxx_usb_ehci_resources[] = {
+	[0] = {
+		.start		= USB_EHCI_BASE,
+		.end		= USB_EHCI_BASE + USB_EHCI_LEN - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= AU1000_USB_HOST_INT,
+		.end		= AU1000_USB_HOST_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 ehci_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_usb_ehci_device = {
+	.name		= "au1xxx-ehci",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(au1xxx_usb_ehci_resources),
+	.resource	= au1xxx_usb_ehci_resources,
+};
+
+/* Au1200 UDC (USB gadget controller) */
+static struct resource au1xxx_usb_gdt_resources[] = {
+	[0] = {
+		.start		= USB_UDC_BASE,
+		.end		= USB_UDC_BASE + USB_UDC_LEN - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= AU1200_USB_INT,
+		.end		= AU1200_USB_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource au1xxx_mmc_resources[] = {
+	[0] = {
+		.start          = SD0_PHYS_ADDR,
+		.end            = SD0_PHYS_ADDR + 0x40,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= SD1_PHYS_ADDR,
+		.end 		= SD1_PHYS_ADDR + 0x40,
+		.flags		= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start          = AU1200_SD_INT,
+		.end            = AU1200_SD_INT,
+		.flags          = IORESOURCE_IRQ,
+	}
+};
+
+static u64 udc_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_usb_gdt_device = {
+	.name		= "au1xxx-udc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &udc_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(au1xxx_usb_gdt_resources),
+	.resource	= au1xxx_usb_gdt_resources,
+};
+
+/* Au1200 UOC (USB OTG controller) */
+static struct resource au1xxx_usb_otg_resources[] = {
+	[0] = {
+		.start		= USB_UOC_BASE,
+		.end		= USB_UOC_BASE + USB_UOC_LEN - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= AU1200_USB_INT,
+		.end		= AU1200_USB_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 uoc_dmamask = ~(u32)0;
+
+static struct platform_device au1xxx_usb_otg_device = {
+	.name		= "au1xxx-uoc",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &uoc_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(au1xxx_usb_otg_resources),
+	.resource	= au1xxx_usb_otg_resources,
+};
+
+static struct resource au1200_lcd_resources[] = {
+	[0] = {
+		.start          = LCD_PHYS_ADDR,
+		.end            = LCD_PHYS_ADDR + 0x800 - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start          = AU1200_LCD_INT,
+		.end            = AU1200_LCD_INT,
+		.flags          = IORESOURCE_IRQ,
+	}
+};
+
+static struct resource au1200_ide0_resources[] = {
+	[0] = {
+		.start		= AU1XXX_ATA_PHYS_ADDR,
+		.end 		= AU1XXX_ATA_PHYS_ADDR + AU1XXX_ATA_PHYS_LEN,
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start		= AU1XXX_ATA_INT,
+		.end		= AU1XXX_ATA_INT,
+		.flags		= IORESOURCE_IRQ,
+	}
+};
+
+static u64 au1200_lcd_dmamask = ~(u32)0;
+
+static struct platform_device au1200_lcd_device = {
+	.name           = "au1200-lcd",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = &au1200_lcd_dmamask,
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(au1200_lcd_resources),
+	.resource       = au1200_lcd_resources,
+};
+
+
+static u64 ide0_dmamask = ~(u32)0;
+
+static struct platform_device au1200_ide0_device = {
+	.name		= "au1200-ide",
+	.id		= 0,
+	.dev = {
+		.dma_mask 		= &ide0_dmamask,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources = ARRAY_SIZE(au1200_ide0_resources),
+	.resource	= au1200_ide0_resources,
+};
+
+static u64 au1xxx_mmc_dmamask =  ~(u32)0;
+
+static struct platform_device au1xxx_mmc_device = {
+	.name = "au1xxx-mmc",
+	.id = 0,
+	.dev = {
+		.dma_mask               = &au1xxx_mmc_dmamask,
+		.coherent_dma_mask      = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(au1xxx_mmc_resources),
+	.resource       = au1xxx_mmc_resources,
+};
+#endif /* #ifdef CONFIG_SOC_AU1200 */
+
+static struct platform_device au1x00_pcmcia_device = {
+	.name 		= "au1x00-pcmcia",
+	.id 		= 0,
+};
+
+#ifdef CONFIG_MIPS_DB1200
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name	= "smc91x-regs",
+		.start	= AU1XXX_SMC91111_PHYS_ADDR,
+		.end	= AU1XXX_SMC91111_PHYS_ADDR + 0xfffff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AU1XXX_SMC91111_IRQ,
+		.end	= AU1XXX_SMC91111_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+ 	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+};
+
+#endif
+
 static struct platform_device *au1xxx_platform_devices[] __initdata = {
 	&au1xxx_usb_ohci_device,
+	&au1x00_pcmcia_device,
+#ifdef CONFIG_FB_AU1100
+	&au1100_lcd_device,
+#endif
+#ifdef CONFIG_SOC_AU1200
+#if 0	/* fixme */
+	&au1xxx_usb_ehci_device,
+#endif
+	&au1xxx_usb_gdt_device,
+	&au1xxx_usb_otg_device,
+	&au1200_lcd_device,
+	&au1200_ide0_device,
+	&au1xxx_mmc_device,
+#endif
+#ifdef CONFIG_MIPS_DB1200
+ 	&smc91x_device,
+#endif
 };
 
 int au1xxx_platform_init(void)

arch/mips/au1000/common/power.c

@@ -34,11 +34,13 @@
 #include <linux/pm.h>
 #include <linux/slab.h>
 #include <linux/sysctl.h>
+#include <linux/jiffies.h>
 
 #include <asm/string.h>
 #include <asm/uaccess.h>
 #include <asm/io.h>
 #include <asm/system.h>
+#include <asm/cacheflush.h>
 #include <asm/mach-au1x00/au1000.h>
 
 #ifdef CONFIG_PM
@@ -50,7 +52,7 @@
 #  define DPRINTK(fmt, args...)
 #endif
 
-static void calibrate_delay(void);
+static void au1000_calibrate_delay(void);
 
 extern void set_au1x00_speed(unsigned int new_freq);
 extern unsigned int get_au1x00_speed(void);
@@ -260,7 +262,7 @@ int au_sleep(void)
 }
 
 static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
-		       void *buffer, size_t * len)
+		       void __user *buffer, size_t * len, loff_t *ppos)
 {
 	int retval = 0;
 #ifdef SLEEP_TEST_TIMEOUT
@@ -294,10 +296,9 @@ static int pm_do_sleep(ctl_table * ctl, int write, struct file *file,
 }
 
 static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
-			 void *buffer, size_t * len)
+			 void __user *buffer, size_t * len, loff_t *ppos)
 {
 	int retval = 0;
-	void	au1k_wait(void);
 
 	if (!write) {
 		*len = 0;
@@ -306,7 +307,7 @@ static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
 		if (retval)
 			return retval;
 		suspend_mode = 1;
-		au1k_wait();
+
 		retval = pm_send_all(PM_RESUME, (void *) 0);
 	}
 	return retval;
@@ -314,7 +315,7 @@ static int pm_do_suspend(ctl_table * ctl, int write, struct file *file,
 
 
 static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
-		      void *buffer, size_t * len)
+		      void __user *buffer, size_t * len, loff_t *ppos)
 {
 	int retval = 0, i;
 	unsigned long val, pll;
@@ -409,14 +410,14 @@ static int pm_do_freq(ctl_table * ctl, int write, struct file *file,
 
 
 	/* We don't want _any_ interrupts other than
-	 * match20. Otherwise our calibrate_delay()
+	 * match20. Otherwise our au1000_calibrate_delay()
 	 * calculation will be off, potentially a lot.
 	 */
 	intc0_mask = save_local_and_disable(0);
 	intc1_mask = save_local_and_disable(1);
 	local_enable_irq(AU1000_TOY_MATCH2_INT);
 	spin_unlock_irqrestore(&pm_lock, flags);
-	calibrate_delay();
+	au1000_calibrate_delay();
 	restore_local_and_enable(0, intc0_mask);
 	restore_local_and_enable(1, intc1_mask);
 	return retval;
@@ -456,7 +457,7 @@ __initcall(pm_init);
    better than 1% */
 #define LPS_PREC 8
 
-static void calibrate_delay(void)
+static void au1000_calibrate_delay(void)
 {
 	unsigned long ticks, loopbit;
 	int lps_precision = LPS_PREC;

arch/mips/au1000/common/prom.c

@@ -75,7 +75,8 @@ void  prom_init_cmdline(void)
 	}
 	if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */
 		--cp;
-	*cp = '\0';
+	if (prom_argc > 1)
+		*cp = '\0';
 
 }
 

arch/mips/au1000/common/puts.c

@@ -39,7 +39,6 @@
 #define TIMEOUT       0xffffff
 #define SLOW_DOWN
 
-static const char digits[16] = "0123456789abcdef";
 static volatile unsigned long * const com1 = (unsigned long *)SERIAL_BASE;
 
 
@@ -54,7 +53,7 @@ static inline void slow_down(void)
 #endif
 
 void
-putch(const unsigned char c)
+prom_putchar(const unsigned char c)
 {
     unsigned char ch;
     int i = 0;
@@ -69,77 +68,3 @@ putch(const unsigned char c)
     } while (0 == (ch & TX_BUSY));
     com1[SER_DATA] = c;
 }
-
-void
-puts(unsigned char *cp)
-{
-    unsigned char ch;
-    int i = 0;
-
-    while (*cp) {
-        do {
-             ch = com1[SER_CMD];
-            slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (0 == (ch & TX_BUSY));
-        com1[SER_DATA] = *cp++;
-    }
-    putch('\r');
-    putch('\n');
-}
-
-void
-fputs(const char *cp)
-{
-    unsigned char ch;
-    int i = 0;
-
-    while (*cp) {
-
-        do {
-             ch = com1[SER_CMD];
-             slow_down();
-            i++;
-            if (i>TIMEOUT) {
-                break;
-            }
-        } while (0 == (ch & TX_BUSY));
-        com1[SER_DATA] = *cp++;
-    }
-}
-
-
-void
-put64(uint64_t ul)
-{
-    int cnt;
-    unsigned ch;
-
-    cnt = 16;            /* 16 nibbles in a 64 bit long */
-    putch('0');
-    putch('x');
-    do {
-        cnt--;
-        ch = (unsigned char)(ul >> cnt * 4) & 0x0F;
-                putch(digits[ch]);
-    } while (cnt > 0);
-}
-
-void
-put32(unsigned u)
-{
-    int cnt;
-    unsigned ch;
-
-    cnt = 8;            /* 8 nibbles in a 32 bit long */
-    putch('0');
-    putch('x');
-    do {
-        cnt--;
-        ch = (unsigned char)(u >> cnt * 4) & 0x0F;
-                putch(digits[ch]);
-    } while (cnt > 0);
-}

arch/mips/au1000/common/setup.c

@@ -32,6 +32,7 @@
 #include <linux/mm.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 
 #include <asm/cpu.h>
 #include <asm/bootinfo.h>
@@ -57,7 +58,7 @@ extern void au1xxx_time_init(void);
 extern void au1xxx_timer_setup(struct irqaction *irq);
 extern void set_cpuspec(void);
 
-static int __init au1x00_setup(void)
+void __init plat_setup(void)
 {
 	struct	cpu_spec *sp;
 	char *argptr;
@@ -106,8 +107,6 @@ static int __init au1x00_setup(void)
         /*strcat(argptr, " video=au1100fb:panel:Sharp_320x240_16");*/
 #ifdef CONFIG_MIPS_HYDROGEN3
          strcat(argptr, " video=au1100fb:panel:Hydrogen_3_NEC_panel_320x240,nohwcursor");
-#else
-        strcat(argptr, " video=au1100fb:panel:s10,nohwcursor");
 #endif
     }
 #endif
@@ -153,15 +152,11 @@ static int __init au1x00_setup(void)
 	au_sync();
 	while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T0S);
 	au_writel(0, SYS_TOYTRIM);
-
-	return 0;
 }
 
-early_initcall(au1x00_setup);
-
 #if defined(CONFIG_64BIT_PHYS_ADDR)
 /* This routine should be valid for all Au1x based boards */
-phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
+phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 {
 	u32 start, end;
 
@@ -192,4 +187,5 @@ phys_t fixup_bigphys_addr(phys_t phys_addr, phys_t size)
 	/* default nop */
 	return phys_addr;
 }
+EXPORT_SYMBOL(__fixup_bigphys_addr);
 #endif

arch/mips/au1000/common/time.c

@@ -50,7 +50,6 @@
 #include <linux/mc146818rtc.h>
 #include <linux/timex.h>
 
-extern void startup_match20_interrupt(void);
 extern void do_softirq(void);
 extern volatile unsigned long wall_jiffies;
 unsigned long missed_heart_beats = 0;
@@ -58,14 +57,17 @@ unsigned long missed_heart_beats = 0;
 static unsigned long r4k_offset; /* Amount to increment compare reg each time */
 static unsigned long r4k_cur;    /* What counter should be at next timer irq */
 int	no_au1xxx_32khz;
-void	(*au1k_wait_ptr)(void);
+extern int allow_au1k_wait; /* default off for CP0 Counter */
 
 /* Cycle counter value at the previous timer interrupt.. */
 static unsigned int timerhi = 0, timerlo = 0;
 
 #ifdef CONFIG_PM
-#define MATCH20_INC 328
-extern void startup_match20_interrupt(void);
+#if HZ < 100 || HZ > 1000
+#error "unsupported HZ value! Must be in [100,1000]"
+#endif
+#define MATCH20_INC (328*100/HZ) /* magic number 328 is for HZ=100... */
+extern void startup_match20_interrupt(irqreturn_t (*handler)(int, void *, struct pt_regs *));
 static unsigned long last_pc0, last_match20;
 #endif
 
@@ -117,17 +119,16 @@ void mips_timer_interrupt(struct pt_regs *regs)
 }
 
 #ifdef CONFIG_PM
-void counter0_irq(int irq, void *dev_id, struct pt_regs *regs)
+irqreturn_t counter0_irq(int irq, void *dev_id, struct pt_regs *regs)
 {
 	unsigned long pc0;
 	int time_elapsed;
 	static int jiffie_drift = 0;
 
-	kstat.irqs[0][irq]++;
 	if (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20) {
 		/* should never happen! */
-		printk(KERN_WARNING "counter 0 w status eror\n");
-		return;
+		printk(KERN_WARNING "counter 0 w status error\n");
+		return IRQ_NONE;
 	}
 
 	pc0 = au_readl(SYS_TOYREAD);
@@ -164,6 +165,8 @@ void counter0_irq(int irq, void *dev_id, struct pt_regs *regs)
 		update_process_times(user_mode(regs));
 #endif
 	}
+
+	return IRQ_HANDLED;
 }
 
 /* When we wakeup from sleep, we have to "catch up" on all of the
@@ -388,7 +391,6 @@ void au1xxx_timer_setup(struct irqaction *irq)
 {
         unsigned int est_freq;
 	extern unsigned long (*do_gettimeoffset)(void);
-	extern void au1k_wait(void);
 
 	printk("calculating r4koff... ");
 	r4k_offset = cal_r4koff();
@@ -441,18 +443,18 @@ void au1xxx_timer_setup(struct irqaction *irq)
 		au_sync();
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
 
-		/* setup match20 to interrupt once every 10ms */
+		/* setup match20 to interrupt once every HZ */
 		last_pc0 = last_match20 = au_readl(SYS_TOYREAD);
 		au_writel(last_match20 + MATCH20_INC, SYS_TOYMATCH2);
 		au_sync();
 		while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20);
-		startup_match20_interrupt();
+		startup_match20_interrupt(counter0_irq);
 
 		do_gettimeoffset = do_fast_pm_gettimeoffset;
 
 		/* We can use the real 'wait' instruction.
 		*/
-		au1k_wait_ptr = au1k_wait;
+		allow_au1k_wait = 1;
 	}
 
 #else

arch/mips/au1000/common/usbdev.c

@@ -1005,11 +1005,11 @@ process_ep0_receive (struct usb_dev* dev)
 #endif
 		dev->ep0_stage = SETUP_STAGE;
 		break;
-		}
+	}
 
 	spin_unlock(&ep0->lock);
-		// we're done processing the packet, free it
-		kfree(pkt);
+	// we're done processing the packet, free it
+	kfree(pkt);
 }
 
 
@@ -1072,8 +1072,7 @@ dma_done_ep0_intr(int irq, void *dev_id, struct pt_regs *regs)
 			clear_dma_done1(ep0->indma);
 
 		pkt = send_packet_complete(ep0);
-		if (pkt)
-			kfree(pkt);
+		kfree(pkt);
 	}
 
 	/*
@@ -1302,8 +1301,7 @@ usbdev_exit(void)
 		endpoint_flush(ep);
 	}
 
-	if (usbdev.full_conf_desc)
-		kfree(usbdev.full_conf_desc);
+	kfree(usbdev.full_conf_desc);
 }
 
 int

arch/mips/au1000/csb250/init.c

@@ -35,7 +35,6 @@
 #include <asm/bootinfo.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
-#include <linux/sched.h>
 
 int prom_argc;
 char **prom_argv, **prom_envp;

arch/mips/au1000/db1x00/irqmap.c

@@ -48,6 +48,38 @@
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
+#ifdef CONFIG_MIPS_DB1500
+char irq_tab_alchemy[][5] __initdata = {
+ [12] =	{ -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - HPT371   */
+ [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
+};
+#endif
+
+#ifdef CONFIG_MIPS_BOSPORUS
+char irq_tab_alchemy[][5] __initdata = {
+ [11] =	{ -1, INTA, INTB, INTX, INTX},   /* IDSEL 11 - miniPCI  */
+ [12] =	{ -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - SN1741   */
+ [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
+};
+#endif
+
+#ifdef CONFIG_MIPS_MIRAGE
+char irq_tab_alchemy[][5] __initdata = {
+ [11] =	{ -1, INTD, INTX, INTX, INTX},   /* IDSEL 11 - SMI VGX */
+ [12] =	{ -1, INTX, INTX, INTC, INTX},   /* IDSEL 12 - PNX1300 */
+ [13] =	{ -1, INTA, INTB, INTX, INTX},   /* IDSEL 13 - miniPCI */
+};
+#endif
+
+#ifdef CONFIG_MIPS_DB1550
+char irq_tab_alchemy[][5] __initdata = {
+ [11] =	{ -1, INTC, INTX, INTX, INTX},   /* IDSEL 11 - on-board HPT371    */
+ [12] =	{ -1, INTB, INTC, INTD, INTA},   /* IDSEL 12 - PCI slot 2 (left)  */
+ [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot 1 (right) */
+};
+#endif
+
+
 au1xxx_irq_map_t au1xxx_irq_map[] = {
 
 #ifndef CONFIG_MIPS_MIRAGE

arch/mips/au1000/db1x00/mirage_ts.c

@@ -102,15 +102,15 @@ static struct {
 } mirage_ts_cal =
 {
 #if 0
-	xscale:   84,
-	xtrans: -157,
-	yscale:   66,
-	ytrans: -150,
+	.xscale   = 84,
+	.xtrans = -157,
+	.yscale   = 66,
+	.ytrans = -150,
 #else
-	xscale:   84,
-	xtrans: -150,
-	yscale:   66,
-	ytrans: -146,
+	.xscale   = 84,
+	.xtrans = -150,
+	.yscale   = 66,
+	.ytrans = -146,
 #endif
 };
 

arch/mips/au1000/hydrogen3/init.c

@@ -37,7 +37,6 @@
 #include <linux/config.h>
 #include <linux/string.h>
 #include <linux/kernel.h>
-#include <linux/sched.h>
 
 int prom_argc;
 char **prom_argv, **prom_envp;

arch/mips/au1000/mtx-1/init.c

@@ -33,7 +33,6 @@
 #include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/mm.h>
-#include <linux/sched.h>
 #include <linux/bootmem.h>
 #include <asm/addrspace.h>
 #include <asm/bootinfo.h>

arch/mips/au1000/mtx-1/irqmap.c

@@ -47,6 +47,17 @@
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
+char irq_tab_alchemy[][5] __initdata = {
+ [0] = { -1, INTA, INTB, INTX, INTX},   /* IDSEL 00 - AdapterA-Slot0 (top)    */
+ [1] = { -1, INTB, INTA, INTX, INTX},   /* IDSEL 01 - AdapterA-Slot1 (bottom) */
+ [2] = { -1, INTC, INTD, INTX, INTX},   /* IDSEL 02 - AdapterB-Slot0 (top)    */
+ [3] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 03 - AdapterB-Slot1 (bottom) */
+ [4] = { -1, INTA, INTB, INTX, INTX},   /* IDSEL 04 - AdapterC-Slot0 (top)    */
+ [5] = { -1, INTB, INTA, INTX, INTX},   /* IDSEL 05 - AdapterC-Slot1 (bottom) */
+ [6] = { -1, INTC, INTD, INTX, INTX},   /* IDSEL 06 - AdapterD-Slot0 (top)    */
+ [7] = { -1, INTD, INTC, INTX, INTX},   /* IDSEL 07 - AdapterD-Slot1 (bottom) */
+};
+
 au1xxx_irq_map_t au1xxx_irq_map[] = {
        { AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
        { AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },

arch/mips/au1000/pb1000/init.c

@@ -65,5 +65,4 @@ void __init prom_init(void)
 		memsize = simple_strtol(memsize_str, NULL, 0);
 	}
 	add_memory_region(0, memsize, BOOT_MEM_RAM);
-	return 0;
 }

arch/mips/au1000/pb1200/Makefile

+#
+# Makefile for the Alchemy Semiconductor PB1200 board.
+#
+
+lib-y := init.o board_setup.o irqmap.o

arch/mips/au1000/pb1200/board_setup.c

+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	Alchemy Pb1200/Db1200 board setup.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/console.h>
+#include <linux/mc146818rtc.h>
+#include <linux/delay.h>
+
+#if defined(CONFIG_BLK_DEV_IDE_AU1XXX)
+#include <linux/ide.h>
+#endif
+
+#include <asm/cpu.h>
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/reboot.h>
+#include <asm/pgtable.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1xxx_dbdma.h>
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/mach-pb1x00/pb1200.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#include <asm/mach-db1x00/db1200.h>
+#define PB1200_ETH_INT DB1200_ETH_INT
+#define PB1200_IDE_INT DB1200_IDE_INT
+#endif
+
+extern void _board_init_irq(void);
+extern void	(*board_init_irq)(void);
+
+void board_reset (void)
+{
+	bcsr->resets = 0;
+	bcsr->system = 0;
+}
+
+void __init board_setup(void)
+{
+	char *argptr = NULL;
+	u32 pin_func;
+
+#if 0
+	/* Enable PSC1 SYNC for AC97.  Normaly done in audio driver,
+	 * but it is board specific code, so put it here.
+	 */
+	pin_func = au_readl(SYS_PINFUNC);
+	au_sync();
+	pin_func |= SYS_PF_MUST_BE_SET | SYS_PF_PSC1_S1;
+	au_writel(pin_func, SYS_PINFUNC);
+
+	au_writel(0, (u32)bcsr|0x10); /* turn off pcmcia power */
+	au_sync();
+#endif
+
+#if defined(CONFIG_I2C_AU1550)
+	{
+	u32 freq0, clksrc;
+
+	/* Select SMBUS in CPLD */
+	bcsr->resets &= ~(BCSR_RESETS_PCS0MUX);
+
+	pin_func = au_readl(SYS_PINFUNC);
+	au_sync();
+	pin_func &= ~(3<<17 | 1<<4);
+	/* Set GPIOs correctly */
+	pin_func |= 2<<17;
+	au_writel(pin_func, SYS_PINFUNC);
+	au_sync();
+
+	/* The i2c driver depends on 50Mhz clock */
+	freq0 = au_readl(SYS_FREQCTRL0);
+	au_sync();
+	freq0 &= ~(SYS_FC_FRDIV1_MASK | SYS_FC_FS1 | SYS_FC_FE1);
+	freq0 |= (3<<SYS_FC_FRDIV1_BIT);
+	/* 396Mhz / (3+1)*2 == 49.5Mhz */
+	au_writel(freq0, SYS_FREQCTRL0);
+	au_sync();
+	freq0 |= SYS_FC_FE1;
+	au_writel(freq0, SYS_FREQCTRL0);
+	au_sync();
+
+	clksrc = au_readl(SYS_CLKSRC);
+	au_sync();
+	clksrc &= ~0x01f00000;
+	/* bit 22 is EXTCLK0 for PSC0 */
+	clksrc |= (0x3 << 22);
+	au_writel(clksrc, SYS_CLKSRC);
+	au_sync();
+	}
+#endif
+
+#ifdef CONFIG_FB_AU1200
+	argptr = prom_getcmdline();
+#ifdef CONFIG_MIPS_PB1200
+	strcat(argptr, " video=au1200fb:panel:bs");
+#endif
+#ifdef CONFIG_MIPS_DB1200
+	strcat(argptr, " video=au1200fb:panel:bs");
+#endif
+#endif
+
+	/* The Pb1200 development board uses external MUX for PSC0 to
+	support SMB/SPI. bcsr->resets bit 12: 0=SMB 1=SPI
+	*/
+#if defined(CONFIG_AU1XXX_PSC_SPI) && defined(CONFIG_I2C_AU1550)
+	#error I2C and SPI are mutually exclusive. Both are physically connected to PSC0.\
+			Refer to Pb1200/Db1200 documentation.
+#elif defined( CONFIG_AU1XXX_PSC_SPI )
+	bcsr->resets |= BCSR_RESETS_PCS0MUX;
+	/*Hard Coding Value to enable Temp Sensors [bit 14] Value for SOC Au1200. Pls refer documentation*/
+	  bcsr->resets =0x900f;
+#elif defined( CONFIG_I2C_AU1550 )
+	bcsr->resets &= (~BCSR_RESETS_PCS0MUX);
+#endif
+	au_sync();
+
+#ifdef CONFIG_MIPS_PB1200
+	printk("AMD Alchemy Pb1200 Board\n");
+#endif
+#ifdef CONFIG_MIPS_DB1200
+	printk("AMD Alchemy Db1200 Board\n");
+#endif
+
+	/* Setup Pb1200 External Interrupt Controller */
+	{
+		extern void (*board_init_irq)(void);
+		extern void _board_init_irq(void);
+		board_init_irq = _board_init_irq;
+	}
+}
+
+int
+board_au1200fb_panel (void)
+{
+	BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+	int p;
+
+	p = bcsr->switches;
+	p >>= 8;
+	p &= 0x0F;
+	return p;
+}
+
+int
+board_au1200fb_panel_init (void)
+{
+	/* Apply power */
+    BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+	bcsr->board |= (BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
+	/*printk("board_au1200fb_panel_init()\n"); */
+	return 0;
+}
+
+int
+board_au1200fb_panel_shutdown (void)
+{
+	/* Remove power */
+    BCSR *bcsr = (BCSR *)BCSR_KSEG1_ADDR;
+	bcsr->board &= ~(BCSR_BOARD_LCDVEE | BCSR_BOARD_LCDVDD | BCSR_BOARD_LCDBL);
+	/*printk("board_au1200fb_panel_shutdown()\n"); */
+	return 0;
+}
+

arch/mips/au1000/pb1200/init.c

+/*
+ *
+ * BRIEF MODULE DESCRIPTION
+ *	PB1200 board setup
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: MontaVista Software, Inc.
+ *         	ppopov@mvista.com or source@mvista.com
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+int prom_argc;
+char **prom_argv, **prom_envp;
+extern void  __init prom_init_cmdline(void);
+extern char *prom_getenv(char *envname);
+
+const char *get_system_type(void)
+{
+	return "Alchemy Pb1200";
+}
+
+void __init prom_init(void)
+{
+	unsigned char *memsize_str;
+	unsigned long memsize;
+
+	prom_argc = (int) fw_arg0;
+	prom_argv = (char **) fw_arg1;
+	prom_envp = (char **) fw_arg2;
+
+	mips_machgroup = MACH_GROUP_ALCHEMY;
+	mips_machtype = MACH_PB1200;
+
+	prom_init_cmdline();
+	memsize_str = prom_getenv("memsize");
+	if (!memsize_str) {
+		memsize = 0x08000000;
+	} else {
+		memsize = simple_strtol(memsize_str, NULL, 0);
+	}
+	add_memory_region(0, memsize, BOOT_MEM_RAM);
+}

arch/mips/au1000/pb1200/irqmap.c

+/*
+ * BRIEF MODULE DESCRIPTION
+ *	Au1xxx irq map table
+ *
+ *  This program is free software; you can redistribute	 it and/or modify it
+ *  under  the terms of	 the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the	License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED	  ``AS	IS'' AND   ANY	EXPRESS OR IMPLIED
+ *  WARRANTIES,	  INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO	EVENT  SHALL   THE AUTHOR  BE	 LIABLE FOR ANY	  DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED	  TO, PROCUREMENT OF  SUBSTITUTE GOODS	OR SERVICES; LOSS OF
+ *  USE, DATA,	OR PROFITS; OR	BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN	 CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/delay.h>
+
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+#include <asm/mach-au1x00/au1000.h>
+
+#ifdef CONFIG_MIPS_PB1200
+#include <asm/mach-pb1x00/pb1200.h>
+#endif
+
+#ifdef CONFIG_MIPS_DB1200
+#include <asm/mach-db1x00/db1200.h>
+#define PB1200_INT_BEGIN DB1200_INT_BEGIN
+#define PB1200_INT_END DB1200_INT_END
+#endif
+
+au1xxx_irq_map_t au1xxx_irq_map[] = {
+	{ AU1000_GPIO_7, INTC_INT_LOW_LEVEL, 0 }, // This is exteranl interrupt cascade
+};
+
+int au1xxx_nr_irqs = sizeof(au1xxx_irq_map)/sizeof(au1xxx_irq_map_t);
+
+/*
+ *	Support for External interrupts on the PbAu1200 Development platform.
+ */
+static volatile int pb1200_cascade_en=0;
+
+irqreturn_t pb1200_cascade_handler( int irq, void *dev_id, struct pt_regs *regs)
+{
+	unsigned short bisr = bcsr->int_status;
+	int extirq_nr = 0;
+
+	/* Clear all the edge interrupts. This has no effect on level */
+	bcsr->int_status = bisr;
+	for( ; bisr; bisr &= (bisr-1) )
+	{
+		extirq_nr = (PB1200_INT_BEGIN-1) + au_ffs(bisr);
+		/* Ack and dispatch IRQ */
+		do_IRQ(extirq_nr,regs);
+	}
+	return IRQ_RETVAL(1);
+}
+
+inline void pb1200_enable_irq(unsigned int irq_nr)
+{
+	bcsr->intset_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
+	bcsr->intset = 1<<(irq_nr - PB1200_INT_BEGIN);
+}
+
+inline void pb1200_disable_irq(unsigned int irq_nr)
+{
+	bcsr->intclr_mask = 1<<(irq_nr - PB1200_INT_BEGIN);
+	bcsr->intclr = 1<<(irq_nr - PB1200_INT_BEGIN);
+}
+
+static unsigned int pb1200_startup_irq( unsigned int irq_nr )
+{
+	if (++pb1200_cascade_en == 1)
+	{
+		request_irq(AU1000_GPIO_7, &pb1200_cascade_handler,
+			0, "Pb1200 Cascade", (void *)&pb1200_cascade_handler );
+#ifdef CONFIG_MIPS_PB1200
+    /* We have a problem with CPLD rev3. Enable a workaround */
+	if( ((bcsr->whoami & BCSR_WHOAMI_CPLD)>>4) <= 3)
+	{
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("Pb1200 must be at CPLD rev4. Please have Pb1200\n");
+		printk("updated to latest revision. This software will not\n");
+		printk("work on anything less than CPLD rev4\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		printk("\nWARNING!!!\n");
+		while(1);
+	}
+#endif
+	}
+	pb1200_enable_irq(irq_nr);
+	return 0;
+}
+
+static void pb1200_shutdown_irq( unsigned int irq_nr )
+{
+	pb1200_disable_irq(irq_nr);
+	if (--pb1200_cascade_en == 0)
+	{
+		free_irq(AU1000_GPIO_7,&pb1200_cascade_handler );
+	}
+	return;
+}
+
+static inline void pb1200_mask_and_ack_irq(unsigned int irq_nr)
+{
+	pb1200_disable_irq( irq_nr );
+}
+
+static void pb1200_end_irq(unsigned int irq_nr)
+{
+	if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
+		pb1200_enable_irq(irq_nr);
+	}
+}
+
+static struct hw_interrupt_type external_irq_type =
+{
+#ifdef CONFIG_MIPS_PB1200
+	"Pb1200 Ext",
+#endif
+#ifdef CONFIG_MIPS_DB1200
+	"Db1200 Ext",
+#endif
+	pb1200_startup_irq,
+	pb1200_shutdown_irq,
+	pb1200_enable_irq,
+	pb1200_disable_irq,
+	pb1200_mask_and_ack_irq,
+	pb1200_end_irq,
+	NULL
+};
+
+void _board_init_irq(void)
+{
+	int irq_nr;
+
+	for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++)
+	{
+		irq_desc[irq_nr].handler = &external_irq_type;
+		pb1200_disable_irq(irq_nr);
+	}
+
+	/* GPIO_7 can not be hooked here, so it is hooked upon first
+	request of any source attached to the cascade */
+}
+

arch/mips/au1000/pb1500/irqmap.c

@@ -47,6 +47,11 @@
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
+char irq_tab_alchemy[][5] __initdata = {
+ [12] = { -1, INTA, INTX, INTX, INTX},   /* IDSEL 12 - HPT370   */
+ [13] = { -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot */
+};
+
 au1xxx_irq_map_t au1xxx_irq_map[] = {
 	{ AU1500_GPIO_204, INTC_INT_HIGH_LEVEL, 0},
 	{ AU1500_GPIO_201, INTC_INT_LOW_LEVEL, 0 },

arch/mips/au1000/pb1550/irqmap.c

@@ -47,6 +47,11 @@
 #include <asm/system.h>
 #include <asm/mach-au1x00/au1000.h>
 
+char irq_tab_alchemy[][5] __initdata = {
+ [12] =	{ -1, INTB, INTC, INTD, INTA},   /* IDSEL 12 - PCI slot 2 (left)  */
+ [13] =	{ -1, INTA, INTB, INTC, INTD},   /* IDSEL 13 - PCI slot 1 (right) */
+};
+
 au1xxx_irq_map_t au1xxx_irq_map[] = {
 	{ AU1000_GPIO_0, INTC_INT_LOW_LEVEL, 0 },
 	{ AU1000_GPIO_1, INTC_INT_LOW_LEVEL, 0 },

arch/mips/boot/Makefile

@@ -33,6 +33,9 @@ vmlinux.ecoff: $(obj)/elf2ecoff $(VMLINUX)
 $(obj)/elf2ecoff: $(obj)/elf2ecoff.c
 	$(HOSTCC) -o $@ $^
 
+vmlinux.bin: $(VMLINUX)
+	$(OBJCOPY) -O binary $(strip-flags) $(VMLINUX) $(obj)/vmlinux.bin
+
 vmlinux.srec: $(VMLINUX)
 	$(OBJCOPY) -S -O srec $(strip-flags) $(VMLINUX) $(obj)/vmlinux.srec
 
@@ -45,5 +48,6 @@ archhelp:
 
 clean-files += addinitrd \
 	       elf2ecoff \
+	       vmlinux.bin \
 	       vmlinux.ecoff \
 	       vmlinux.srec

arch/mips/cobalt/Makefile

@@ -2,6 +2,6 @@
 # Makefile for the Cobalt micro systems family specific parts of the kernel
 #
 
-obj-y	 := irq.o int-handler.o reset.o setup.o promcon.o
+obj-y	 := irq.o int-handler.o reset.o setup.o
 
 EXTRA_AFLAGS := $(CFLAGS)

arch/mips/cobalt/int-handler.S

@@ -18,8 +18,8 @@
 		SAVE_ALL
 		CLI
 
-		la	ra, ret_from_irq
-		move	a1, sp
+		PTR_LA	ra, ret_from_irq
+		move	a0, sp
 		j	cobalt_irq
 
 		END(cobalt_handle_int)

arch/mips/cobalt/irq.c

@@ -10,6 +10,8 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
 
 #include <asm/i8259.h>
 #include <asm/irq_cpu.h>
@@ -25,8 +27,8 @@ extern void cobalt_handle_int(void);
  * the CPU interrupt lines, and ones that come in on the via chip. The CPU
  * mappings are:
  *
- *    16,  - Software interrupt 0 (unused)	IE_SW0
- *    17   - Software interrupt 1 (unused)	IE_SW0
+ *    16   - Software interrupt 0 (unused)	IE_SW0
+ *    17   - Software interrupt 1 (unused)	IE_SW1
  *    18   - Galileo chip (timer)		IE_IRQ0
  *    19   - Tulip 0 + NCR SCSI			IE_IRQ1
  *    20   - Tulip 1				IE_IRQ2
@@ -42,61 +44,94 @@ extern void cobalt_handle_int(void);
  *    15  - IDE1
  */
 
-asmlinkage void cobalt_irq(struct pt_regs *regs)
+static inline void galileo_irq(struct pt_regs *regs)
 {
-	unsigned int pending = read_c0_status() & read_c0_cause();
-
-	if (pending & CAUSEF_IP2) {			/* int 18 */
-		unsigned long irq_src = GALILEO_INL(GT_INTRCAUSE_OFS);
-
-		/* Check for timer irq ... */
-		if (irq_src & GALILEO_T0EXP) {
-			/* Clear the int line */
-			GALILEO_OUTL(0, GT_INTRCAUSE_OFS);
-			do_IRQ(COBALT_TIMER_IRQ, regs);
-		}
-		return;
-	}
+	unsigned int mask, pending, devfn;
 
-	if (pending & CAUSEF_IP6) {			/* int 22 */
-		int irq = i8259_irq();
+	mask = GALILEO_INL(GT_INTRMASK_OFS);
+	pending = GALILEO_INL(GT_INTRCAUSE_OFS) & mask;
 
-		if (irq >= 0)
-			do_IRQ(irq, regs);
-		return;
-	}
+	if (pending & GALILEO_INTR_T0EXP) {
 
-	if (pending & CAUSEF_IP3) {			/* int 19 */
-		do_IRQ(COBALT_ETH0_IRQ, regs);
-		return;
-	}
+		GALILEO_OUTL(~GALILEO_INTR_T0EXP, GT_INTRCAUSE_OFS);
+		do_IRQ(COBALT_GALILEO_IRQ, regs);
 
-	if (pending & CAUSEF_IP4) {			/* int 20 */
-		do_IRQ(COBALT_ETH1_IRQ, regs);
-		return;
-	}
+	} else if (pending & GALILEO_INTR_RETRY_CTR) {
 
-	if (pending & CAUSEF_IP5) {			/* int 21 */
-		do_IRQ(COBALT_SERIAL_IRQ, regs);
-		return;
-	}
+		devfn = GALILEO_INL(GT_PCI0_CFGADDR_OFS) >> 8;
+		GALILEO_OUTL(~GALILEO_INTR_RETRY_CTR, GT_INTRCAUSE_OFS);
+		printk(KERN_WARNING "Galileo: PCI retry count exceeded (%02x.%u)\n",
+			PCI_SLOT(devfn), PCI_FUNC(devfn));
+
+	} else {
 
-	if (pending & CAUSEF_IP7) {			/* int 23 */
-		do_IRQ(COBALT_QUBE_SLOT_IRQ, regs);
-		return;
+		GALILEO_OUTL(mask & ~pending, GT_INTRMASK_OFS);
+		printk(KERN_WARNING "Galileo: masking unexpected interrupt %08x\n", pending);
 	}
 }
 
+static inline void via_pic_irq(struct pt_regs *regs)
+{
+	int irq;
+
+	irq = i8259_irq();
+	if (irq >= 0)
+		do_IRQ(irq, regs);
+}
+
+asmlinkage void cobalt_irq(struct pt_regs *regs)
+{
+	unsigned pending;
+
+	pending = read_c0_status() & read_c0_cause();
+
+	if (pending & CAUSEF_IP2)			/* COBALT_GALILEO_IRQ (18) */
+
+		galileo_irq(regs);
+
+	else if (pending & CAUSEF_IP6)			/* COBALT_VIA_IRQ (22) */
+
+		via_pic_irq(regs);
+
+	else if (pending & CAUSEF_IP3)			/* COBALT_ETH0_IRQ (19) */
+
+		do_IRQ(COBALT_CPU_IRQ + 3, regs);
+
+	else if (pending & CAUSEF_IP4)			/* COBALT_ETH1_IRQ (20) */
+
+		do_IRQ(COBALT_CPU_IRQ + 4, regs);
+
+	else if (pending & CAUSEF_IP5)			/* COBALT_SERIAL_IRQ (21) */
+
+		do_IRQ(COBALT_CPU_IRQ + 5, regs);
+
+	else if (pending & CAUSEF_IP7)			/* IRQ 23 */
+
+		do_IRQ(COBALT_CPU_IRQ + 7, regs);
+}
+
+static struct irqaction irq_via = {
+	no_action, 0, { { 0, } }, "cascade", NULL, NULL
+};
+
 void __init arch_init_irq(void)
 {
+	/*
+	 * Mask all Galileo interrupts. The Galileo
+	 * handler is set in cobalt_timer_setup()
+	 */
+	GALILEO_OUTL(0, GT_INTRMASK_OFS);
+
 	set_except_vector(0, cobalt_handle_int);
 
 	init_i8259_irqs();				/*  0 ... 15 */
-	mips_cpu_irq_init(16);				/* 16 ... 23 */
+	mips_cpu_irq_init(COBALT_CPU_IRQ);		/* 16 ... 23 */
 
 	/*
 	 * Mask all cpu interrupts
 	 *  (except IE4, we already masked those at VIA level)
 	 */
 	change_c0_status(ST0_IM, IE_IRQ4);
+
+	setup_irq(COBALT_VIA_IRQ, &irq_via);
 }

arch/mips/cobalt/promcon.c

-/*
- * PROM console for Cobalt Raq2
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1995, 1996, 1997 by Ralf Baechle
- * Copyright (C) 2001 by Liam Davies (ldavies@agile.tv)
- *
- */
-
-#include <linux/init.h>
-#include <linux/console.h>
-#include <linux/kdev_t.h>
-#include <linux/serial_reg.h>
-
-#include <asm/delay.h>
-#include <asm/serial.h>
-#include <asm/io.h>
-
-static unsigned long port = 0xc800000;
-
-static __inline__ void ns16550_cons_put_char(char ch, unsigned long ioaddr)
-{
-	char lsr;
-
-	do {
-		lsr = inb(ioaddr + UART_LSR);
-	} while ((lsr & (UART_LSR_TEMT | UART_LSR_THRE)) != (UART_LSR_TEMT | UART_LSR_THRE));
-	outb(ch, ioaddr + UART_TX);
-}
-
-static __inline__ char ns16550_cons_get_char(unsigned long ioaddr)
-{
-	while ((inb(ioaddr + UART_LSR) & UART_LSR_DR) == 0)
-		udelay(1);
-	return inb(ioaddr + UART_RX);
-}
-
-void ns16550_console_write(struct console *co, const char *s, unsigned count)
-{
-	char lsr, ier;
-	unsigned i;
-
-	ier = inb(port + UART_IER);
-	outb(0x00, port + UART_IER);
-	for (i=0; i < count; i++, s++) {
-
-		if(*s == '\n')
-			ns16550_cons_put_char('\r', port);
-		ns16550_cons_put_char(*s, port);
-	}
-
-	do {
-		lsr = inb(port + UART_LSR);
-   	} while ((lsr & (UART_LSR_TEMT | UART_LSR_THRE)) != (UART_LSR_TEMT | UART_LSR_THRE));
-
-	outb(ier, port + UART_IER);
-}
-
-char getDebugChar(void)
-{
-	return ns16550_cons_get_char(port);
-}
-
-void putDebugChar(char kgdb_char)
-{
-	ns16550_cons_put_char(kgdb_char, port);
-}
-
-static struct console ns16550_console = {
-    .name	= "prom",
-    .setup	= NULL,
-    .write	= ns16550_console_write,
-    .flags	= CON_PRINTBUFFER,
-    .index	= -1,
-};
-
-static int __init ns16550_setup_console(void)
-{
-	register_console(&ns16550_console);
-
-	return 0;
-}
-
-console_initcall(ns16550_setup_console);

arch/mips/ddb5xxx/Kconfig

+config DDB5477_BUS_FREQUENCY
+	int "bus frequency (in kHZ, 0 for auto-detect)"
+	depends on DDB5477
+	default 0

arch/mips/ddb5xxx/ddb5074/nile4_pic.c

@@ -209,14 +209,13 @@ static void nile4_irq_end(unsigned int irq) {
 #define nile4_irq_shutdown nile4_disable_irq
 
 static hw_irq_controller nile4_irq_controller = {
-    "nile4",
-    nile4_irq_startup,
-    nile4_irq_shutdown,
-    nile4_enable_irq,
-    nile4_disable_irq,
-    nile4_ack_irq,
-    nile4_irq_end,
-    NULL
+	.typename = "nile4",
+	.startup = nile4_irq_startup,
+	.shutdown = nile4_irq_shutdown,
+	.enable = nile4_enable_irq,
+	.disable = nile4_disable_irq,
+	.ack = nile4_ack_irq,
+	.end = nile4_irq_end,
 };
 
 void nile4_irq_setup(u32 base) {

arch/mips/ddb5xxx/ddb5074/setup.c

@@ -85,7 +85,7 @@ static void __init ddb_time_init(void)
 
 
 
-static void __init ddb5074_setup(void)
+void __init plat_setup(void)
 {
 	set_io_port_base(NILE4_PCI_IO_BASE);
 	isa_slot_offset = NILE4_PCI_MEM_BASE;
@@ -106,8 +106,6 @@ static void __init ddb5074_setup(void)
 	panic_timeout = 180;
 }
 
-early_initcall(ddb5074_setup);
-
 #define USE_NILE4_SERIAL	0
 
 #if USE_NILE4_SERIAL