iio: imu: inv_mpu6050: fix error path not turning chip back off

Some functions are turning the chip on and not back off in error
path. With set_power function using a reference counter that
would keep the chip on forever.
Signed-off-by: Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

drivers/iio/imu/inv_mpu6050/inv_mpu_core.c

@@ -273,21 +273,21 @@ static int inv_mpu6050_init_config(struct iio_dev *indio_dev)
 	d = (INV_MPU6050_FSR_2000DPS << INV_MPU6050_GYRO_CONFIG_FSR_SHIFT);
 	result = regmap_write(st->map, st->reg->gyro_config, d);
 	if (result)
-		return result;
+		goto error_power_off;
 
 	result = inv_mpu6050_set_lpf_regs(st, INV_MPU6050_FILTER_20HZ);
 	if (result)
-		return result;
+		goto error_power_off;
 
 	d = INV_MPU6050_ONE_K_HZ / INV_MPU6050_INIT_FIFO_RATE - 1;
 	result = regmap_write(st->map, st->reg->sample_rate_div, d);
 	if (result)
-		return result;
+		goto error_power_off;
 
 	d = (INV_MPU6050_FS_02G << INV_MPU6050_ACCL_CONFIG_FSR_SHIFT);
 	result = regmap_write(st->map, st->reg->accl_config, d);
 	if (result)
-		return result;
+		goto error_power_off;
 
 	result = regmap_write(st->map, st->reg->int_pin_cfg, st->irq_mask);
 	if (result)
@@ -295,8 +295,11 @@ static int inv_mpu6050_init_config(struct iio_dev *indio_dev)
 
 	memcpy(&st->chip_config, hw_info[st->chip_type].config,
 	       sizeof(struct inv_mpu6050_chip_config));
-	result = inv_mpu6050_set_power_itg(st, false);
 
+	return inv_mpu6050_set_power_itg(st, false);
+
+error_power_off:
+	inv_mpu6050_set_power_itg(st, false);
 	return result;
 }
 

drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c

@@ -53,45 +53,58 @@ static int inv_mpu6050_set_enable(struct iio_dev *indio_dev, bool enable)
 			result = inv_mpu6050_switch_engine(st, true,
 					INV_MPU6050_BIT_PWR_GYRO_STBY);
 			if (result)
-				return result;
+				goto error_power_off;
 		}
 		if (st->chip_config.accl_fifo_enable) {
 			result = inv_mpu6050_switch_engine(st, true,
 					INV_MPU6050_BIT_PWR_ACCL_STBY);
 			if (result)
-				return result;
+				goto error_gyro_off;
 		}
 		result = inv_reset_fifo(indio_dev);
 		if (result)
-			return result;
+			goto error_accl_off;
 	} else {
 		result = regmap_write(st->map, st->reg->fifo_en, 0);
 		if (result)
-			return result;
+			goto error_accl_off;
 
 		result = regmap_write(st->map, st->reg->int_enable, 0);
 		if (result)
-			return result;
+			goto error_accl_off;
 
 		result = regmap_write(st->map, st->reg->user_ctrl, 0);
 		if (result)
-			return result;
+			goto error_accl_off;
 
 		result = inv_mpu6050_switch_engine(st, false,
-					INV_MPU6050_BIT_PWR_GYRO_STBY);
+					INV_MPU6050_BIT_PWR_ACCL_STBY);
 		if (result)
-			return result;
+			goto error_accl_off;
 
 		result = inv_mpu6050_switch_engine(st, false,
-					INV_MPU6050_BIT_PWR_ACCL_STBY);
+					INV_MPU6050_BIT_PWR_GYRO_STBY);
 		if (result)
-			return result;
+			goto error_gyro_off;
+
 		result = inv_mpu6050_set_power_itg(st, false);
 		if (result)
-			return result;
+			goto error_power_off;
 	}
 
 	return 0;
+
+error_accl_off:
+	if (st->chip_config.accl_fifo_enable)
+		inv_mpu6050_switch_engine(st, false,
+					  INV_MPU6050_BIT_PWR_ACCL_STBY);
+error_gyro_off:
+	if (st->chip_config.gyro_fifo_enable)
+		inv_mpu6050_switch_engine(st, false,
+					  INV_MPU6050_BIT_PWR_GYRO_STBY);
+error_power_off:
+	inv_mpu6050_set_power_itg(st, false);
+	return result;
 }
 
 /**