drm/amdgpu: Add DC feature mask to disable fractional pwm

[Why]

Some LED panel drivers might not like fractional PWM. In such cases,
backlight flickering may be observed.

[How]

Add a DC feature mask to disable fractional PWM, and associate it with
the preexisting dc_config flag.

The flag is only plumbed through the dmcu firmware, so plumb it through
the driver path as well.

To disable, add the following to the linux cmdline:
amdgpu.dcfeaturemask=0x4

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204957Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Lukáš Krejčí <lskrejci@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c

@@ -728,6 +728,9 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
 	if (amdgpu_dc_feature_mask & DC_MULTI_MON_PP_MCLK_SWITCH_MASK)
 		init_data.flags.multi_mon_pp_mclk_switch = true;
 
+	if (amdgpu_dc_feature_mask & DC_DISABLE_FRACTIONAL_PWM_MASK)
+		init_data.flags.disable_fractional_pwm = true;
+
 	init_data.flags.power_down_display_on_boot = true;
 
 #ifdef CONFIG_DRM_AMD_DC_DCN2_0

drivers/gpu/drm/amd/display/dc/dce/dce_abm.c

@@ -404,6 +404,10 @@ static bool dce_abm_init_backlight(struct abm *abm)
 	/* Enable the backlight output */
 	REG_UPDATE(BL_PWM_CNTL, BL_PWM_EN, 1);
 
+	/* Disable fractional pwm if configured */
+	REG_UPDATE(BL_PWM_CNTL, BL_PWM_FRACTIONAL_EN,
+		   abm->ctx->dc->config.disable_fractional_pwm ? 0 : 1);
+
 	/* Unlock group 2 backlight registers */
 	REG_UPDATE(BL_PWM_GRP1_REG_LOCK,
 			BL_PWM_GRP1_REG_LOCK, 0);

drivers/gpu/drm/amd/include/amd_shared.h

@@ -143,6 +143,7 @@ enum PP_FEATURE_MASK {
 enum DC_FEATURE_MASK {
 	DC_FBC_MASK = 0x1,
 	DC_MULTI_MON_PP_MCLK_SWITCH_MASK = 0x2,
+	DC_DISABLE_FRACTIONAL_PWM_MASK = 0x4,
 	DC_PSR_MASK = 0x8,
 };