Skip to content

L
linux
Commit eafa6cb1 authored by Linus Torvalds's avatar Linus Torvalds
Browse files
Options

Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6 

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6:
  sh: Titan defconfig update.
  sh: Fix IPR-IRQ's for IRQ-chip change breakage.
  sh: Update r7780rp_defconfig.
  video: Fix include in hp680_bl.
  sh: Wire up new syscalls.
parents 612b322a 4731f2df
Hide whitespace changes
Inline Side-by-side
Showing with 517 additions and 410 deletions
arch/sh/boards/renesas/hs7751rvoip/setup.c
View file @ eafa6cb1
...@@ -15,12 +15,16 @@ ...@@ -15,12 +15,16 @@
#include <asm/io.h> #include <asm/io.h>
#include <asm/machvec.h> #include <asm/machvec.h>
static void __init hs7751rvoip_init_irq(void) static struct ipr_data hs77501rvoip_ipr_map[] = {
{
#if defined(CONFIG_HS7751RVOIP_CODEC) #if defined(CONFIG_HS7751RVOIP_CODEC)
make_ipr_irq(DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); { DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
make_ipr_irq(DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); { DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
#endif #endif
};
static void __init hs7751rvoip_init_irq(void)
{
make_ipr_irq(hs77501rvoip_ipr_map, ARRAY_SIZE(hs77501rvoip_ipr_map));
init_hs7751rvoip_IRQ(); init_hs7751rvoip_IRQ();
} }
......
arch/sh/boards/renesas/sh7710voipgw/setup.c
View file @ eafa6cb1
...@@ -13,6 +13,51 @@ ...@@ -13,6 +13,51 @@
#include <asm/io.h> #include <asm/io.h>
#include <asm/irq.h> #include <asm/irq.h>
static struct ipr_data sh7710voipgw_ipr_map[] = {
{ TIMER2_IRQ, TIMER2_IPR_ADDR, TIMER2_IPR_POS, TIMER2_PRIORITY },
{ WDT_IRQ, WDT_IPR_ADDR, WDT_IPR_POS, WDT_PRIORITY },
/* SCIF0 */
{ SCIF0_ERI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
{ SCIF0_RXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
{ SCIF0_BRI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
{ SCIF0_TXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
/* DMAC-1 */
{ DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
{ DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
{ DMTE2_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
{ DMTE3_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
/* DMAC-2 */
{ DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
{ DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
/* IPSEC */
{ IPSEC_IRQ, IPSEC_IPR_ADDR, IPSEC_IPR_POS, IPSEC_PRIORITY },
/* EDMAC */
{ EDMAC0_IRQ, EDMAC0_IPR_ADDR, EDMAC0_IPR_POS, EDMAC0_PRIORITY },
{ EDMAC1_IRQ, EDMAC1_IPR_ADDR, EDMAC1_IPR_POS, EDMAC1_PRIORITY },
{ EDMAC2_IRQ, EDMAC2_IPR_ADDR, EDMAC2_IPR_POS, EDMAC2_PRIORITY },
/* SIOF0 */
{ SIOF0_ERI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
{ SIOF0_TXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
{ SIOF0_RXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
{ SIOF0_CCI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
/* SIOF1 */
{ SIOF1_ERI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY },
{ SIOF1_TXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY },
{ SIOF1_RXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY },
{ SIOF1_CCI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS, SIOF1_PRIORITY },
/* SLIC IRQ's */
{ IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY },
{ IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY },
};
/* /*
* Initialize IRQ setting * Initialize IRQ setting
*/ */
...@@ -37,65 +82,7 @@ static void __init sh7710voipgw_init_irq(void) ...@@ -37,65 +82,7 @@ static void __init sh7710voipgw_init_irq(void)
*/ */
ctrl_outw(0x2aa, INTC_ICR1); ctrl_outw(0x2aa, INTC_ICR1);
/* Now make IPR interrupts */ make_ipr_irq(sh7710voipgw_ipr_map, ARRAY_SIZE(sh7710voipgw_ipr_map));
make_ipr_irq(TIMER2_IRQ, TIMER2_IPR_ADDR,
TIMER2_IPR_POS, TIMER2_PRIORITY);
make_ipr_irq(WDT_IRQ, WDT_IPR_ADDR, WDT_IPR_POS, WDT_PRIORITY);
/* SCIF0 */
make_ipr_irq(SCIF0_ERI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS,
SCIF0_PRIORITY);
make_ipr_irq(SCIF0_RXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS,
SCIF0_PRIORITY);
make_ipr_irq(SCIF0_BRI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS,
SCIF0_PRIORITY);
make_ipr_irq(SCIF0_TXI_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS,
SCIF0_PRIORITY);
/* DMAC-1 */
make_ipr_irq(DMTE0_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
make_ipr_irq(DMTE1_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
make_ipr_irq(DMTE2_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
make_ipr_irq(DMTE3_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY);
/* DMAC-2 */
make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY);
make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY);
/* IPSEC */
make_ipr_irq(IPSEC_IRQ, IPSEC_IPR_ADDR, IPSEC_IPR_POS, IPSEC_PRIORITY);
/* EDMAC */
make_ipr_irq(EDMAC0_IRQ, EDMAC0_IPR_ADDR, EDMAC0_IPR_POS,
EDMAC0_PRIORITY);
make_ipr_irq(EDMAC1_IRQ, EDMAC1_IPR_ADDR, EDMAC1_IPR_POS,
EDMAC1_PRIORITY);
make_ipr_irq(EDMAC2_IRQ, EDMAC2_IPR_ADDR, EDMAC2_IPR_POS,
EDMAC2_PRIORITY);
/* SIOF0 */
make_ipr_irq(SIOF0_ERI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS,
SIOF0_PRIORITY);
make_ipr_irq(SIOF0_TXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS,
SIOF0_PRIORITY);
make_ipr_irq(SIOF0_RXI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS,
SIOF0_PRIORITY);
make_ipr_irq(SIOF0_CCI_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS,
SIOF0_PRIORITY);
/* SIOF1 */
make_ipr_irq(SIOF1_ERI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS,
SIOF1_PRIORITY);
make_ipr_irq(SIOF1_TXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS,
SIOF1_PRIORITY);
make_ipr_irq(SIOF1_RXI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS,
SIOF1_PRIORITY);
make_ipr_irq(SIOF1_CCI_IRQ, SIOF1_IPR_ADDR, SIOF1_IPR_POS,
SIOF1_PRIORITY);
/* SLIC IRQ's */
make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY);
make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY);
} }
/* /*
......
arch/sh/boards/se/7300/irq.c
View file @ eafa6cb1
...@@ -13,6 +13,17 @@ ...@@ -13,6 +13,17 @@
#include <asm/io.h> #include <asm/io.h>
#include <asm/se7300.h> #include <asm/se7300.h>
static struct ipr_data se7300_ipr_map[] = {
/* PC_IRQ[0-3] -> IRQ0 (32) */
{ IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, 0x0f - IRQ0_IRQ },
/* A_IRQ[0-3] -> IRQ1 (33) */
{ IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, 0x0f - IRQ1_IRQ },
{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
{ DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
{ DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
{ VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
};
/* /*
* Initialize IRQ setting * Initialize IRQ setting
*/ */
...@@ -23,14 +34,7 @@ init_7300se_IRQ(void) ...@@ -23,14 +34,7 @@ init_7300se_IRQ(void)
ctrl_outw(0xa000, INTC_ICR1); /* IRQ mode; IRQ0,1 enable. */ ctrl_outw(0xa000, INTC_ICR1); /* IRQ mode; IRQ0,1 enable. */
ctrl_outw(0x0000, PORT_PFCR); /* use F for IRQ[3:0] and SIU. */ ctrl_outw(0x0000, PORT_PFCR); /* use F for IRQ[3:0] and SIU. */
/* PC_IRQ[0-3] -> IRQ0 (32) */ make_ipr_irq(se7300_ipr_map, ARRAY_SIZE(se7300_ipr_map));
make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, 0x0f - IRQ0_IRQ);
/* A_IRQ[0-3] -> IRQ1 (33) */
make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, 0x0f - IRQ1_IRQ);
make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY);
make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */
} }
arch/sh/boards/se/73180/irq.c
View file @ eafa6cb1
...@@ -87,13 +87,38 @@ shmse_irq_demux(int irq) ...@@ -87,13 +87,38 @@ shmse_irq_demux(int irq)
return irq; return irq;
} }
static struct ipr_data se73180_siof0_ipr_map[] = {
{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
};
static struct ipr_data se73180_vpu_ipr_map[] = {
{ VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 },
};
static struct ipr_data se73180_other_ipr_map[] = {
{ DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
{ DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
{ DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
{ IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
{ IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
{ IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
{ IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
{ SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY },
/* VIO interrupt */
{ CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
{ BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
{ VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
{ LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY },
};
/* /*
* Initialize IRQ setting * Initialize IRQ setting
*/ */
void __init void __init
init_73180se_IRQ(void) init_73180se_IRQ(void)
{ {
make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); make_ipr_irq(se73180_siof0_ipr_map, ARRAY_SIZE(se73180_siof0_ipr_map));
ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */ ctrl_outw(0x2000, 0xb03fffec); /* mrshpc irq enable */
ctrl_outw(0x2000, 0xb07fffec); /* mrshpc irq enable */ ctrl_outw(0x2000, 0xb07fffec); /* mrshpc irq enable */
...@@ -101,27 +126,11 @@ init_73180se_IRQ(void) ...@@ -101,27 +126,11 @@ init_73180se_IRQ(void)
ctrl_outw(2 << ((7 - 5) * 2), INTC_ICR1); /* low-level irq */ ctrl_outw(2 << ((7 - 5) * 2), INTC_ICR1); /* low-level irq */
make_intreq_irq(10); make_intreq_irq(10);
make_ipr_irq(VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8); make_ipr_irq(se73180_vpu_ipr_map, ARRAY_SIZE(se73180_vpu_ipr_map));
ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */ ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */
make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); make_ipr_irq(se73180_other_ipr_map, ARRAY_SIZE(se73180_other_ipr_map));
make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY);
make_ipr_irq(IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY);
make_ipr_irq(IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS,
IIC0_PRIORITY);
make_ipr_irq(IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS,
IIC0_PRIORITY);
make_ipr_irq(IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY);
make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY);
make_ipr_irq(SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY);
/* VIO interrupt */
make_ipr_irq(CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
make_ipr_irq(BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
make_ipr_irq(VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
make_ipr_irq(LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY);
ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */
} }
arch/sh/boards/se/7343/irq.c
View file @ eafa6cb1
...@@ -102,6 +102,51 @@ shmse_irq_demux(int irq) ...@@ -102,6 +102,51 @@ shmse_irq_demux(int irq)
static struct irqaction irq5 = { no_action, 0, CPU_MASK_NONE, "IRQ5-cascade", static struct irqaction irq5 = { no_action, 0, CPU_MASK_NONE, "IRQ5-cascade",
NULL, NULL}; NULL, NULL};
static struct ipr_data se7343_irq5_ipr_map[] = {
{ IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY },
};
static struct ipr_data se7343_siof0_vpu_ipr_map[] = {
{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
{ VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8 },
};
static struct ipr_data se7343_other_ipr_map[] = {
{ DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
{ DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
{ DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
{ DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
{ DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
{ DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY },
/* I2C block */
{ IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
{ IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
{ IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
{ IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY },
{ IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
{ IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
{ IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
{ IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY },
/* SIOF */
{ SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY },
/* SIU */
{ SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY },
/* VIO interrupt */
{ CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
{ BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
{ VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
/*MFI interrupt*/
{ MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY },
/* LCD controller */
{ LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY },
};
/* /*
* Initialize IRQ setting * Initialize IRQ setting
*/ */
...@@ -138,54 +183,17 @@ init_7343se_IRQ(void) ...@@ -138,54 +183,17 @@ init_7343se_IRQ(void)
/* Setup all external interrupts to be active low */ /* Setup all external interrupts to be active low */
ctrl_outw(0xaaaa, INTC_ICR1); ctrl_outw(0xaaaa, INTC_ICR1);
make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR+2, IRQ5_IPR_POS, IRQ5_PRIORITY); make_ipr_irq(se7343_irq5_ipr_map, ARRAY_SIZE(se7343_irq5_ipr_map));
setup_irq(IRQ5_IRQ, &irq5); setup_irq(IRQ5_IRQ, &irq5);
/* Set port control to use IRQ5 */ /* Set port control to use IRQ5 */
*(u16 *)0xA4050108 &= ~0xc; *(u16 *)0xA4050108 &= ~0xc;
make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY); make_ipr_irq(se7343_siof0_vpu_ipr_map, ARRAY_SIZE(se7343_siof0_vpu_ipr_map));
make_ipr_irq(VPU_IRQ, VPU_IPR_ADDR, VPU_IPR_POS, 8);
ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */ ctrl_outb(0x0f, INTC_IMCR5); /* enable SCIF IRQ */
make_ipr_irq(DMTE0_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); make_ipr_irq(se7343_other_ipr_map, ARRAY_SIZE(se7343_other_ipr_map));
make_ipr_irq(DMTE1_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY);
make_ipr_irq(DMTE4_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY);
make_ipr_irq(DMTE5_IRQ, DMA2_IPR_ADDR, DMA2_IPR_POS, DMA2_PRIORITY);
/* I2C block */
make_ipr_irq(IIC0_ALI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY);
make_ipr_irq(IIC0_TACKI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS,
IIC0_PRIORITY);
make_ipr_irq(IIC0_WAITI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS,
IIC0_PRIORITY);
make_ipr_irq(IIC0_DTEI_IRQ, IIC0_IPR_ADDR, IIC0_IPR_POS, IIC0_PRIORITY);
make_ipr_irq(IIC1_ALI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY);
make_ipr_irq(IIC1_TACKI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS,
IIC1_PRIORITY);
make_ipr_irq(IIC1_WAITI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS,
IIC1_PRIORITY);
make_ipr_irq(IIC1_DTEI_IRQ, IIC1_IPR_ADDR, IIC1_IPR_POS, IIC1_PRIORITY);
/* SIOF */
make_ipr_irq(SIOF0_IRQ, SIOF0_IPR_ADDR, SIOF0_IPR_POS, SIOF0_PRIORITY);
/* SIU */
make_ipr_irq(SIU_IRQ, SIU_IPR_ADDR, SIU_IPR_POS, SIU_PRIORITY);
/* VIO interrupt */
make_ipr_irq(CEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
make_ipr_irq(BEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
make_ipr_irq(VEU_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY);
/*MFI interrupt*/
make_ipr_irq(MFI_IRQ, MFI_IPR_ADDR, MFI_IPR_POS, MFI_PRIORITY);
/* LCD controller */
make_ipr_irq(LCDC_IRQ, LCDC_IPR_ADDR, LCDC_IPR_POS, LCDC_PRIORITY);
ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */ ctrl_outw(0x2000, PA_MRSHPC + 0x0c); /* mrshpc irq enable */
} }
arch/sh/boards/se/770x/irq.c
View file @ eafa6cb1
...@@ -13,6 +13,48 @@ ...@@ -13,6 +13,48 @@
#include <asm/io.h> #include <asm/io.h>
#include <asm/se.h> #include <asm/se.h>
static struct ipr_data se770x_ipr_map[] = {
#if defined(CONFIG_CPU_SUBTYPE_SH7705)
/* This is default value */
{ 0xf-0x2, BCR_ILCRA, 2, 0x2 },
{ 0xf-0xa, BCR_ILCRA, 1, 0xa },
{ 0xf-0x5, BCR_ILCRB, 0, 0x5 },
{ 0xf-0x8, BCR_ILCRC, 1, 0x8 },
{ 0xf-0xc, BCR_ILCRC, 0, 0xc },
{ 0xf-0xe, BCR_ILCRD, 3, 0xe },
{ 0xf-0x3, BCR_ILCRD, 1, 0x3 }, /* LAN */
{ 0xf-0xd, BCR_ILCRE, 2, 0xd },
{ 0xf-0x9, BCR_ILCRE, 1, 0x9 },
{ 0xf-0x1, BCR_ILCRE, 0, 0x1 },
{ 0xf-0xf, BCR_ILCRF, 3, 0xf },
{ 0xf-0xb, BCR_ILCRF, 1, 0xb },
{ 0xf-0x7, BCR_ILCRG, 3, 0x7 },
{ 0xf-0x6, BCR_ILCRG, 2, 0x6 },
{ 0xf-0x4, BCR_ILCRG, 1, 0x4 },
#else
{ 14, BCR_ILCRA, 2, 0x0f-14 },
{ 12, BCR_ILCRA, 1, 0x0f-12 },
{ 8, BCR_ILCRB, 1, 0x0f- 8 },
{ 6, BCR_ILCRC, 3, 0x0f- 6 },
{ 5, BCR_ILCRC, 2, 0x0f- 5 },
{ 4, BCR_ILCRC, 1, 0x0f- 4 },
{ 3, BCR_ILCRC, 0, 0x0f- 3 },
{ 1, BCR_ILCRD, 3, 0x0f- 1 },
{ 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */
{ 0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */
{ 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */
{ 9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */
{ 7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */
/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
/* NOTE: #2 and #13 are not used on PC */
{ 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */
{ 2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */
#endif
};
/* /*
* Initialize IRQ setting * Initialize IRQ setting
*/ */
...@@ -38,42 +80,6 @@ void __init init_se_IRQ(void) ...@@ -38,42 +80,6 @@ void __init init_se_IRQ(void)
ctrl_outw(0, BCR_ILCRE); ctrl_outw(0, BCR_ILCRE);
ctrl_outw(0, BCR_ILCRF); ctrl_outw(0, BCR_ILCRF);
ctrl_outw(0, BCR_ILCRG); ctrl_outw(0, BCR_ILCRG);
/* This is default value */
make_ipr_irq(0xf-0x2, BCR_ILCRA, 2, 0x2);
make_ipr_irq(0xf-0xa, BCR_ILCRA, 1, 0xa);
make_ipr_irq(0xf-0x5, BCR_ILCRB, 0, 0x5);
make_ipr_irq(0xf-0x8, BCR_ILCRC, 1, 0x8);
make_ipr_irq(0xf-0xc, BCR_ILCRC, 0, 0xc);
make_ipr_irq(0xf-0xe, BCR_ILCRD, 3, 0xe);
make_ipr_irq(0xf-0x3, BCR_ILCRD, 1, 0x3); /* LAN */
make_ipr_irq(0xf-0xd, BCR_ILCRE, 2, 0xd);
make_ipr_irq(0xf-0x9, BCR_ILCRE, 1, 0x9);
make_ipr_irq(0xf-0x1, BCR_ILCRE, 0, 0x1);
make_ipr_irq(0xf-0xf, BCR_ILCRF, 3, 0xf);
make_ipr_irq(0xf-0xb, BCR_ILCRF, 1, 0xb);
make_ipr_irq(0xf-0x7, BCR_ILCRG, 3, 0x7);
make_ipr_irq(0xf-0x6, BCR_ILCRG, 2, 0x6);
make_ipr_irq(0xf-0x4, BCR_ILCRG, 1, 0x4);
#else
make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-14);
make_ipr_irq(12, BCR_ILCRA, 1, 0x0f-12);
make_ipr_irq( 8, BCR_ILCRB, 1, 0x0f- 8);
make_ipr_irq( 6, BCR_ILCRC, 3, 0x0f- 6);
make_ipr_irq( 5, BCR_ILCRC, 2, 0x0f- 5);
make_ipr_irq( 4, BCR_ILCRC, 1, 0x0f- 4);
make_ipr_irq( 3, BCR_ILCRC, 0, 0x0f- 3);
make_ipr_irq( 1, BCR_ILCRD, 3, 0x0f- 1);
make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); /* LAN */
make_ipr_irq( 0, BCR_ILCRE, 3, 0x0f- 0); /* PCIRQ3 */
make_ipr_irq(11, BCR_ILCRE, 2, 0x0f-11); /* PCIRQ2 */
make_ipr_irq( 9, BCR_ILCRE, 1, 0x0f- 9); /* PCIRQ1 */
make_ipr_irq( 7, BCR_ILCRE, 0, 0x0f- 7); /* PCIRQ0 */
/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
/* NOTE: #2 and #13 are not used on PC */
make_ipr_irq(13, BCR_ILCRG, 1, 0x0f-13); /* SLOTIRQ2 */
make_ipr_irq( 2, BCR_ILCRG, 0, 0x0f- 2); /* SLOTIRQ1 */
#endif #endif
make_ipr_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map));
} }
arch/sh/boards/se/7751/irq.c
View file @ eafa6cb1
...@@ -14,53 +14,50 @@ ...@@ -14,53 +14,50 @@
#include <asm/irq.h> #include <asm/irq.h>
#include <asm/se7751.h> #include <asm/se7751.h>
/* static struct ipr_data se7751_ipr_map[] = {
* Initialize IRQ setting
*/
void __init init_7751se_IRQ(void)
{
/* Leave old Solution Engine code in for reference. */ /* Leave old Solution Engine code in for reference. */
#if defined(CONFIG_SH_SOLUTION_ENGINE) #if defined(CONFIG_SH_SOLUTION_ENGINE)
/* /*
* Super I/O (Just mimic PC): * Super I/O (Just mimic PC):
* 1: keyboard * 1: keyboard
* 3: serial 0 * 3: serial 0
* 4: serial 1 * 4: serial 1
* 5: printer * 5: printer
* 6: floppy * 6: floppy
* 8: rtc * 8: rtc
* 12: mouse * 12: mouse
* 14: ide0 * 14: ide0
*/ */
make_ipr_irq(14, BCR_ILCRA, 2, 0x0f-14); { 14, BCR_ILCRA, 2, 0x0f-14 },
make_ipr_irq(12, BCR_ILCRA, 1, 0x0f-12); { 12, BCR_ILCRA, 1, 0x0f-12 },
make_ipr_irq( 8, BCR_ILCRB, 1, 0x0f- 8); { 8, BCR_ILCRB, 1, 0x0f- 8 },
make_ipr_irq( 6, BCR_ILCRC, 3, 0x0f- 6); { 6, BCR_ILCRC, 3, 0x0f- 6 },
make_ipr_irq( 5, BCR_ILCRC, 2, 0x0f- 5); { 5, BCR_ILCRC, 2, 0x0f- 5 },
make_ipr_irq( 4, BCR_ILCRC, 1, 0x0f- 4); { 4, BCR_ILCRC, 1, 0x0f- 4 },
make_ipr_irq( 3, BCR_ILCRC, 0, 0x0f- 3); { 3, BCR_ILCRC, 0, 0x0f- 3 },
make_ipr_irq( 1, BCR_ILCRD, 3, 0x0f- 1); { 1, BCR_ILCRD, 3, 0x0f- 1 },
make_ipr_irq(10, BCR_ILCRD, 1, 0x0f-10); /* LAN */ { 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */
make_ipr_irq( 0, BCR_ILCRE, 3, 0x0f- 0); /* PCIRQ3 */ { 0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */
make_ipr_irq(11, BCR_ILCRE, 2, 0x0f-11); /* PCIRQ2 */ { 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */
make_ipr_irq( 9, BCR_ILCRE, 1, 0x0f- 9); /* PCIRQ1 */ { 9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */
make_ipr_irq( 7, BCR_ILCRE, 0, 0x0f- 7); /* PCIRQ0 */ { 7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */
/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */ /* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
/* NOTE: #2 and #13 are not used on PC */ /* NOTE: #2 and #13 are not used on PC */
make_ipr_irq(13, BCR_ILCRG, 1, 0x0f-13); /* SLOTIRQ2 */ { 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */
make_ipr_irq( 2, BCR_ILCRG, 0, 0x0f- 2); /* SLOTIRQ1 */ { 2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */
#elif defined(CONFIG_SH_7751_SOLUTION_ENGINE) #elif defined(CONFIG_SH_7751_SOLUTION_ENGINE)
{ 13, BCR_ILCRD, 3, 2 },
make_ipr_irq(13, BCR_ILCRD, 3, 2); /* Add additional entries here as drivers are added and tested. */
/* Add additional calls to make_ipr_irq() as drivers are added
* and tested.
*/
#endif #endif
};
/*
* Initialize IRQ setting
*/
void __init init_7751se_IRQ(void)
{
make_ipr_irq(se7751_ipr_map, ARRAY_SIZE(se7751_ipr_map));
} }
arch/sh/boards/sh03/setup.c
View file @ eafa6cb1
...@@ -14,14 +14,17 @@ ...@@ -14,14 +14,17 @@
#include <asm/sh03/sh03.h> #include <asm/sh03/sh03.h>
#include <asm/addrspace.h> #include <asm/addrspace.h>
static struct ipr_data sh03_ipr_map[] = {
{ IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY },
{ IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY },
{ IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY },
{ IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY },
};
static void __init init_sh03_IRQ(void) static void __init init_sh03_IRQ(void)
{ {
ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
make_ipr_irq(sh03_ipr_map, ARRAY_SIZE(sh03_ipr_map));
make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY);
make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY);
make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY);
make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY);
} }
extern void *cf_io_base; extern void *cf_io_base;
......
arch/sh/boards/snapgear/setup.c
View file @ eafa6cb1
...@@ -68,6 +68,13 @@ module_init(eraseconfig_init); ...@@ -68,6 +68,13 @@ module_init(eraseconfig_init);
* IRL3 = crypto * IRL3 = crypto
*/ */
static struct ipr_data snapgear_ipr_map[] = {
make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY);
make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY);
make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY);
make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY);
};
static void __init init_snapgear_IRQ(void) static void __init init_snapgear_IRQ(void)
{ {
/* enable individual interrupt mode for externals */ /* enable individual interrupt mode for externals */
...@@ -75,10 +82,7 @@ static void __init init_snapgear_IRQ(void) ...@@ -75,10 +82,7 @@ static void __init init_snapgear_IRQ(void)
printk("Setup SnapGear IRQ/IPR ...\n"); printk("Setup SnapGear IRQ/IPR ...\n");
make_ipr_irq(IRL0_IRQ, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); make_ipr_irq(snapgear_ipr_map, ARRAY_SIZE(snapgear_ipr_map));
make_ipr_irq(IRL1_IRQ, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY);
make_ipr_irq(IRL2_IRQ, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY);
make_ipr_irq(IRL3_IRQ, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY);
} }
/* /*
......
arch/sh/boards/titan/setup.c
View file @ eafa6cb1
...@@ -9,15 +9,19 @@ ...@@ -9,15 +9,19 @@
extern void __init pcibios_init_platform(void); extern void __init pcibios_init_platform(void);
static struct ipr_data titan_ipr_map[] = {
{ TITAN_IRQ_WAN, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY },
{ TITAN_IRQ_LAN, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY },
{ TITAN_IRQ_MPCIA, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY },
{ TITAN_IRQ_USB, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY },
};
static void __init init_titan_irq(void) static void __init init_titan_irq(void)
{ {
/* enable individual interrupt mode for externals */ /* enable individual interrupt mode for externals */
ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR); ctrl_outw(ctrl_inw(INTC_ICR) | INTC_ICR_IRLM, INTC_ICR);
make_ipr_irq( TITAN_IRQ_WAN, IRL0_IPR_ADDR, IRL0_IPR_POS, IRL0_PRIORITY); /* PCIRQ0 */ make_ipr_irq(titan_ipr_map, ARRAY_SIZE(titan_ipr_map));
make_ipr_irq( TITAN_IRQ_LAN, IRL1_IPR_ADDR, IRL1_IPR_POS, IRL1_PRIORITY); /* PCIRQ1 */
make_ipr_irq( TITAN_IRQ_MPCIA, IRL2_IPR_ADDR, IRL2_IPR_POS, IRL2_PRIORITY); /* PCIRQ2 */
make_ipr_irq( TITAN_IRQ_USB, IRL3_IPR_ADDR, IRL3_IPR_POS, IRL3_PRIORITY); /* PCIRQ3 */
} }
struct sh_machine_vector mv_titan __initmv = { struct sh_machine_vector mv_titan __initmv = {
......
arch/sh/configs/r7780rp_defconfig
View file @ eafa6cb1
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.18 # Linux kernel version: 2.6.19-rc3
# Tue Oct 3 11:32:47 2006 # Tue Oct 31 12:32:06 2006
# #
CONFIG_SUPERH=y CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
...@@ -10,6 +10,7 @@ CONFIG_GENERIC_HWEIGHT=y ...@@ -10,6 +10,7 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# #
...@@ -178,7 +179,7 @@ CONFIG_MMU=y ...@@ -178,7 +179,7 @@ CONFIG_MMU=y
CONFIG_PAGE_OFFSET=0x80000000 CONFIG_PAGE_OFFSET=0x80000000
CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_START=0x08000000
CONFIG_MEMORY_SIZE=0x08000000 CONFIG_MEMORY_SIZE=0x08000000
CONFIG_32BIT=y # CONFIG_32BIT is not set
CONFIG_VSYSCALL=y CONFIG_VSYSCALL=y
CONFIG_HUGETLB_PAGE_SIZE_64K=y CONFIG_HUGETLB_PAGE_SIZE_64K=y
# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set
...@@ -229,9 +230,7 @@ CONFIG_SH_PCLK_FREQ=32000000 ...@@ -229,9 +230,7 @@ CONFIG_SH_PCLK_FREQ=32000000
# #
# DMA support # DMA support
# #
CONFIG_SH_DMA=y # CONFIG_SH_DMA is not set
CONFIG_NR_ONCHIP_DMA_CHANNELS=6
# CONFIG_NR_DMA_CHANNELS_BOOL is not set
# #
# Companion Chips # Companion Chips
...@@ -259,7 +258,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000 ...@@ -259,7 +258,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_BOOT_LINK_OFFSET=0x00800000
# CONFIG_UBC_WAKEUP is not set # CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="mem=128M console=ttySC0,115200 root=/dev/hda1" CONFIG_CMDLINE="mem=128M console=ttySC0,115200 root=/dev/sda1"
# #
# Bus options # Bus options
...@@ -336,6 +335,7 @@ CONFIG_IP_PNP_DHCP=y ...@@ -336,6 +335,7 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_TUNNEL is not set # CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set # CONFIG_TCP_CONG_ADVANCED is not set
...@@ -440,77 +440,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 ...@@ -440,77 +440,29 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_CDROM_PKTCDVD is not set # CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set # CONFIG_ATA_OVER_ETH is not set
#
# Misc devices
#
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# #
# ATA/ATAPI/MFM/RLL support # ATA/ATAPI/MFM/RLL support
# #
CONFIG_IDE=m # CONFIG_IDE is not set
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=m
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
CONFIG_BLK_DEV_IDE_SATA=y
CONFIG_BLK_DEV_IDEDISK=m
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
CONFIG_BLK_DEV_AEC62XX=m
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=m
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=m
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set
# #
# SCSI device support # SCSI device support
# #
# CONFIG_RAID_ATTRS is not set # CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=m CONFIG_SCSI=y
# CONFIG_SCSI_NETLINK is not set # CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y CONFIG_SCSI_PROC_FS=y
# #
# SCSI support type (disk, tape, CD-ROM) # SCSI support type (disk, tape, CD-ROM)
# #
CONFIG_BLK_DEV_SD=m CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set # CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set # CONFIG_BLK_DEV_SR is not set
...@@ -561,6 +513,7 @@ CONFIG_CHR_DEV_SG=m ...@@ -561,6 +513,7 @@ CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DC390T is not set
...@@ -570,7 +523,55 @@ CONFIG_CHR_DEV_SG=m ...@@ -570,7 +523,55 @@ CONFIG_CHR_DEV_SG=m
# #
# Serial ATA (prod) and Parallel ATA (experimental) drivers # Serial ATA (prod) and Parallel ATA (experimental) drivers
# #
# CONFIG_ATA is not set CONFIG_ATA=y
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
CONFIG_SATA_SIL=y
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# #
# Multi-device support (RAID and LVM) # Multi-device support (RAID and LVM)
...@@ -840,7 +841,6 @@ CONFIG_HW_RANDOM=y ...@@ -840,7 +841,6 @@ CONFIG_HW_RANDOM=y
# TPM devices # TPM devices
# #
# CONFIG_TCG_TPM is not set # CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
# #
# I2C support # I2C support
...@@ -856,6 +856,7 @@ CONFIG_HW_RANDOM=y ...@@ -856,6 +856,7 @@ CONFIG_HW_RANDOM=y
# #
# Dallas's 1-wire bus # Dallas's 1-wire bus
# #
# CONFIG_W1 is not set
# #
# Hardware Monitoring support # Hardware Monitoring support
...@@ -867,15 +868,10 @@ CONFIG_HWMON=y ...@@ -867,15 +868,10 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# #
# Multimedia devices # Multimedia devices
# #
# CONFIG_VIDEO_DEV is not set # CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
# #
# Digital Video Broadcasting Devices # Digital Video Broadcasting Devices
...@@ -959,7 +955,29 @@ CONFIG_USB_ARCH_HAS_EHCI=y ...@@ -959,7 +955,29 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# #
# Real Time Clock # Real Time Clock
# #
# CONFIG_RTC_CLASS is not set CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_SH=y
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set
# #
# DMA Engine support # DMA Engine support
...@@ -984,6 +1002,7 @@ CONFIG_EXT3_FS=y ...@@ -984,6 +1002,7 @@ CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set # CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y CONFIG_FS_MBCACHE=y
...@@ -991,6 +1010,7 @@ CONFIG_FS_MBCACHE=y ...@@ -991,6 +1010,7 @@ CONFIG_FS_MBCACHE=y
# CONFIG_JFS_FS is not set # CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set # CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set # CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=y CONFIG_MINIX_FS=y
# CONFIG_ROMFS_FS is not set # CONFIG_ROMFS_FS is not set
...@@ -1027,7 +1047,8 @@ CONFIG_PROC_FS=y ...@@ -1027,7 +1047,8 @@ CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y CONFIG_SYSFS=y
# CONFIG_TMPFS is not set CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y CONFIG_RAMFS=y
...@@ -1159,6 +1180,7 @@ CONFIG_DEBUG_FS=y ...@@ -1159,6 +1180,7 @@ CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y CONFIG_FRAME_POINTER=y
CONFIG_FORCED_INLINING=y CONFIG_FORCED_INLINING=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_SH_STANDARD_BIOS is not set # CONFIG_SH_STANDARD_BIOS is not set
# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_SCIF_CONSOLE is not set
...@@ -1178,9 +1200,9 @@ CONFIG_FORCED_INLINING=y ...@@ -1178,9 +1200,9 @@ CONFIG_FORCED_INLINING=y
# #
CONFIG_CRYPTO=y CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=m CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD4 is not set
...@@ -1191,7 +1213,7 @@ CONFIG_CRYPTO_MD5=y ...@@ -1191,7 +1213,7 @@ CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set # CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set # CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set # CONFIG_CRYPTO_TWOFISH is not set
......
arch/sh/configs/titan_defconfig
View file @ eafa6cb1
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.18 # Linux kernel version: 2.6.19-rc3
# Tue Oct 3 12:59:14 2006 # Mon Oct 30 18:04:49 2006
# #
CONFIG_SUPERH=y CONFIG_SUPERH=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
...@@ -10,6 +10,7 @@ CONFIG_GENERIC_HWEIGHT=y ...@@ -10,6 +10,7 @@ CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
# #
...@@ -23,7 +24,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32 ...@@ -23,7 +24,7 @@ CONFIG_INIT_ENV_ARG_LIMIT=32
# General setup # General setup
# #
CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y # CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y CONFIG_SWAP=y
CONFIG_SYSVIPC=y CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set # CONFIG_IPC_NS is not set
...@@ -236,8 +237,8 @@ CONFIG_HZ_250=y ...@@ -236,8 +237,8 @@ CONFIG_HZ_250=y
CONFIG_HZ=250 CONFIG_HZ=250
# CONFIG_KEXEC is not set # CONFIG_KEXEC is not set
# CONFIG_SMP is not set # CONFIG_SMP is not set
CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set # CONFIG_PREEMPT is not set
# #
...@@ -247,7 +248,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000 ...@@ -247,7 +248,7 @@ CONFIG_ZERO_PAGE_OFFSET=0x00001000
CONFIG_BOOT_LINK_OFFSET=0x009e0000 CONFIG_BOOT_LINK_OFFSET=0x009e0000
# CONFIG_UBC_WAKEUP is not set # CONFIG_UBC_WAKEUP is not set
CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf" CONFIG_CMDLINE="console=ttySC1,38400N81 root=/dev/nfs ip=:::::eth1:autoconf rw"
# #
# Bus options # Bus options
...@@ -334,6 +335,7 @@ CONFIG_INET_XFRM_TUNNEL=y ...@@ -334,6 +335,7 @@ CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=m CONFIG_INET_DIAG=m
CONFIG_INET_TCP_DIAG=m CONFIG_INET_TCP_DIAG=m
# CONFIG_TCP_CONG_ADVANCED is not set # CONFIG_TCP_CONG_ADVANCED is not set
...@@ -355,9 +357,10 @@ CONFIG_INET6_XFRM_TUNNEL=y ...@@ -355,9 +357,10 @@ CONFIG_INET6_XFRM_TUNNEL=y
CONFIG_INET6_TUNNEL=y CONFIG_INET6_TUNNEL=y
CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=y CONFIG_IPV6_TUNNEL=y
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y CONFIG_NETFILTER=y
...@@ -713,6 +716,12 @@ CONFIG_BLK_DEV_INITRD=y ...@@ -713,6 +716,12 @@ CONFIG_BLK_DEV_INITRD=y
# CONFIG_CDROM_PKTCDVD is not set # CONFIG_CDROM_PKTCDVD is not set
CONFIG_ATA_OVER_ETH=m CONFIG_ATA_OVER_ETH=m
#
# Misc devices
#
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# #
# ATA/ATAPI/MFM/RLL support # ATA/ATAPI/MFM/RLL support
# #
...@@ -778,9 +787,9 @@ CONFIG_CHR_DEV_SG=m ...@@ -778,9 +787,9 @@ CONFIG_CHR_DEV_SG=m
# CONFIG_SCSI_INIA100 is not set # CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set # CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_DC390T is not set
...@@ -1095,7 +1104,6 @@ CONFIG_HW_RANDOM=y ...@@ -1095,7 +1104,6 @@ CONFIG_HW_RANDOM=y
# TPM devices # TPM devices
# #
# CONFIG_TCG_TPM is not set # CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
# #
# I2C support # I2C support
...@@ -1123,15 +1131,10 @@ CONFIG_HWMON=y ...@@ -1123,15 +1131,10 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT1211 is not set
# CONFIG_HWMON_DEBUG_CHIP is not set # CONFIG_HWMON_DEBUG_CHIP is not set
#
# Misc devices
#
# #
# Multimedia devices # Multimedia devices
# #
# CONFIG_VIDEO_DEV is not set # CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
# #
# Digital Video Broadcasting Devices # Digital Video Broadcasting Devices
...@@ -1177,9 +1180,9 @@ CONFIG_USB_DEVICEFS=y ...@@ -1177,9 +1180,9 @@ CONFIG_USB_DEVICEFS=y
# USB Host Controller Drivers # USB Host Controller Drivers
# #
CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set CONFIG_USB_EHCI_SPLIT_ISO=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set # CONFIG_USB_OHCI_BIG_ENDIAN is not set
...@@ -1235,7 +1238,6 @@ CONFIG_USB_STORAGE=y ...@@ -1235,7 +1238,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_ATI_REMOTE2 is not set # CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set # CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set # CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# #
# USB Imaging devices # USB Imaging devices
...@@ -1246,11 +1248,20 @@ CONFIG_USB_STORAGE=y ...@@ -1246,11 +1248,20 @@ CONFIG_USB_STORAGE=y
# #
# USB Network Adapters # USB Network Adapters
# #
# CONFIG_USB_CATC is not set CONFIG_USB_CATC=m
# CONFIG_USB_KAWETH is not set CONFIG_USB_KAWETH=m
# CONFIG_USB_PEGASUS is not set CONFIG_USB_PEGASUS=m
# CONFIG_USB_RTL8150 is not set CONFIG_USB_RTL8150=m
# CONFIG_USB_USBNET is not set CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_GL620A is not set
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
# CONFIG_USB_NET_MCS7830 is not set
# CONFIG_USB_NET_RNDIS_HOST is not set
# CONFIG_USB_NET_CDC_SUBSET is not set
CONFIG_USB_NET_ZAURUS=m
CONFIG_USB_MON=y CONFIG_USB_MON=y
# #
...@@ -1285,6 +1296,7 @@ CONFIG_USB_SERIAL_ARK3116=m ...@@ -1285,6 +1296,7 @@ CONFIG_USB_SERIAL_ARK3116=m
# CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set # CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_SERIAL_PL2303=m
...@@ -1316,6 +1328,7 @@ CONFIG_USB_SERIAL_PL2303=m ...@@ -1316,6 +1328,7 @@ CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set # CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_TEST is not set # CONFIG_USB_TEST is not set
# #
...@@ -1357,7 +1370,26 @@ CONFIG_USB_SERIAL_PL2303=m ...@@ -1357,7 +1370,26 @@ CONFIG_USB_SERIAL_PL2303=m
# #
# Real Time Clock # Real Time Clock
# #
# CONFIG_RTC_CLASS is not set CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
#
# RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
CONFIG_RTC_DRV_SH=m
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set
# #
# DMA Engine support # DMA Engine support
...@@ -1380,8 +1412,12 @@ CONFIG_EXT2_FS=y ...@@ -1380,8 +1412,12 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4DEV_FS=m
# CONFIG_EXT4DEV_FS_XATTR is not set
CONFIG_JBD=y CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set # CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
CONFIG_REISERFS_FS=m CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_PROC_INFO is not set
...@@ -1393,9 +1429,10 @@ CONFIG_XFS_FS=m ...@@ -1393,9 +1429,10 @@ CONFIG_XFS_FS=m
# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set # CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set # CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set # CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set # CONFIG_QUOTA is not set
...@@ -1480,7 +1517,12 @@ CONFIG_SUNRPC=y ...@@ -1480,7 +1517,12 @@ CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set # CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set # CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set # CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set # CONFIG_AFS_FS is not set
...@@ -1583,9 +1625,10 @@ CONFIG_LOG_BUF_SHIFT=16 ...@@ -1583,9 +1625,10 @@ CONFIG_LOG_BUF_SHIFT=16
# CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set # CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set # CONFIG_FORCED_INLINING is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_SH_STANDARD_BIOS is not set # CONFIG_SH_STANDARD_BIOS is not set
CONFIG_EARLY_SCIF_CONSOLE=y # CONFIG_EARLY_SCIF_CONSOLE is not set
# CONFIG_EARLY_PRINTK is not set # CONFIG_EARLY_PRINTK is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_STACK_USAGE is not set
...@@ -1605,7 +1648,7 @@ CONFIG_CRYPTO=y ...@@ -1605,7 +1648,7 @@ CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=m CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD4=m
...@@ -1615,7 +1658,7 @@ CONFIG_CRYPTO_SHA256=m ...@@ -1615,7 +1658,7 @@ CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=m CONFIG_CRYPTO_BLOWFISH=m
......
arch/sh/drivers/dma/dma-sh.c
View file @ eafa6cb1
...@@ -19,23 +19,34 @@ ...@@ -19,23 +19,34 @@
#include <asm/io.h> #include <asm/io.h>
#include "dma-sh.h" #include "dma-sh.h"
static inline unsigned int get_dmte_irq(unsigned int chan)
{
unsigned int irq = 0;
#ifdef CONFIG_CPU_SH4
static struct ipr_data dmae_ipr_map[] = {
{ DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
};
#endif
static struct ipr_data dmte_ipr_map[] = {
/* /*
* Normally we could just do DMTE0_IRQ + chan outright, though in the * Normally we could just do DMTE0_IRQ + chan outright, though in the
* case of the 7751R, the DMTE IRQs for channels > 4 start right above * case of the 7751R, the DMTE IRQs for channels > 4 start right above
* the SCIF * the SCIF
*/ */
if (chan < 4) { { DMTE0_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
irq = DMTE0_IRQ + chan; { DMTE0_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
} else { { DMTE0_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
#ifdef DMTE4_IRQ { DMTE0_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
irq = DMTE4_IRQ + chan - 4; { DMTE4_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
#endif { DMTE4_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
} { DMTE4_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
{ DMTE4_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
};
static inline unsigned int get_dmte_irq(unsigned int chan)
{
unsigned int irq = 0;
if (chan < ARRAY_SIZE(dmte_ipr_map))
irq = dmte_ipr_map[chan].irq;
return irq; return irq;
} }
...@@ -258,17 +269,16 @@ static int __init sh_dmac_init(void) ...@@ -258,17 +269,16 @@ static int __init sh_dmac_init(void)
int i; int i;
#ifdef CONFIG_CPU_SH4 #ifdef CONFIG_CPU_SH4
make_ipr_irq(DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); make_ipr_irq(dmae_ipr_map, ARRAY_SIZE(dmae_ipr_map));
i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0); i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0);
if (unlikely(i < 0)) if (unlikely(i < 0))
return i; return i;
#endif #endif
for (i = 0; i < info->nr_channels; i++) { i = info->nr_channels;
int irq = get_dmte_irq(i); if (i > ARRAY_SIZE(dmte_ipr_map))
i = ARRAY_SIZE(dmte_ipr_map);
make_ipr_irq(irq, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY); make_ipr_irq(dmte_ipr_map, i);
}
/* /*
* Initialize DMAOR, and clean up any error flags that may have * Initialize DMAOR, and clean up any error flags that may have
......
arch/sh/kernel/cpu/irq/ipr.c
View file @ eafa6cb1
...@@ -23,24 +23,21 @@ ...@@ -23,24 +23,21 @@
#include <asm/io.h> #include <asm/io.h>
#include <asm/machvec.h> #include <asm/machvec.h>
struct ipr_data {
unsigned int addr; /* Address of Interrupt Priority Register */
int shift; /* Shifts of the 16-bit data */
int priority; /* The priority */
};
static void disable_ipr_irq(unsigned int irq) static void disable_ipr_irq(unsigned int irq)
{ {
struct ipr_data *p = get_irq_chip_data(irq); struct ipr_data *p = get_irq_chip_data(irq);
int shift = p->shift*4;
/* Set the priority in IPR to 0 */ /* Set the priority in IPR to 0 */
ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr); ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << shift)), p->addr);
} }
static void enable_ipr_irq(unsigned int irq) static void enable_ipr_irq(unsigned int irq)
{ {
struct ipr_data *p = get_irq_chip_data(irq); struct ipr_data *p = get_irq_chip_data(irq);
int shift = p->shift*4;
/* Set priority in IPR back to original value */ /* Set priority in IPR back to original value */
ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr); ctrl_outw(ctrl_inw(p->addr) | (p->priority << shift), p->addr);
} }
static struct irq_chip ipr_irq_chip = { static struct irq_chip ipr_irq_chip = {
...@@ -50,67 +47,57 @@ static struct irq_chip ipr_irq_chip = { ...@@ -50,67 +47,57 @@ static struct irq_chip ipr_irq_chip = {
.mask_ack = disable_ipr_irq, .mask_ack = disable_ipr_irq,
}; };
void make_ipr_irq(unsigned int irq, unsigned int addr, int pos, int priority) void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs)
{ {
struct ipr_data ipr_data; int i;
disable_irq_nosync(irq);
ipr_data.addr = addr;
ipr_data.shift = pos*4; /* POSition (0-3) x 4 means shift */
ipr_data.priority = priority;
set_irq_chip_and_handler_name(irq, &ipr_irq_chip, for (i = 0; i < nr_irqs; i++) {
unsigned int irq = table[i].irq;
disable_irq_nosync(irq);
set_irq_chip_and_handler_name(irq, &ipr_irq_chip,
handle_level_irq, "level"); handle_level_irq, "level");
set_irq_chip_data(irq, &ipr_data); set_irq_chip_data(irq, &table[i]);
enable_ipr_irq(irq);
enable_ipr_irq(irq); }
} }
EXPORT_SYMBOL(make_ipr_irq);
/* XXX: This needs to die a horrible death.. */ static struct ipr_data sys_ipr_map[] = {
void __init init_IRQ(void)
{
#ifndef CONFIG_CPU_SUBTYPE_SH7780 #ifndef CONFIG_CPU_SUBTYPE_SH7780
make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY); { TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY },
make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY); { TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY },
#ifdef RTC_IRQ #ifdef RTC_IRQ
make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY); { RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY },
#endif #endif
#ifdef SCI_ERI_IRQ #ifdef SCI_ERI_IRQ
make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); { SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY },
make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); { SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY },
make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY); { SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY },
#endif #endif
#ifdef SCIF1_ERI_IRQ #ifdef SCIF1_ERI_IRQ
make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); { SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY },
make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); { SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY },
make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); { SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY },
make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY); { SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY },
#endif #endif
#if defined(CONFIG_CPU_SUBTYPE_SH7300) #if defined(CONFIG_CPU_SUBTYPE_SH7300)
make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY); { SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); { DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY); { DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY); { VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
#endif #endif
#ifdef SCIF_ERI_IRQ #ifdef SCIF_ERI_IRQ
make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); { SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY },
make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); { SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY },
make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); { SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY },
make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY); { SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY },
#endif #endif
#ifdef IRDA_ERI_IRQ #ifdef IRDA_ERI_IRQ
make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); { IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY },
make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); { IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY },
make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); { IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY },
make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY); { IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY },
#endif #endif
#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \ #if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
defined(CONFIG_CPU_SUBTYPE_SH7706) || \ defined(CONFIG_CPU_SUBTYPE_SH7706) || \
defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705) defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
...@@ -124,14 +111,19 @@ void __init init_IRQ(void) ...@@ -124,14 +111,19 @@ void __init init_IRQ(void)
* You should set corresponding bits of PFC to "00" * You should set corresponding bits of PFC to "00"
* to enable these interrupts. * to enable these interrupts.
*/ */
make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY); { IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY },
make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY); { IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY },
make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY); { IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY },
make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY); { IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY },
make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY); { IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY },
make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY); { IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY },
#endif #endif
#endif #endif
};
void __init init_IRQ(void)
{
make_ipr_irq(sys_ipr_map, ARRAY_SIZE(sys_ipr_map));
#ifdef CONFIG_CPU_HAS_PINT_IRQ #ifdef CONFIG_CPU_HAS_PINT_IRQ
init_IRQ_pint(); init_IRQ_pint();
...@@ -153,5 +145,3 @@ int ipr_irq_demux(int irq) ...@@ -153,5 +145,3 @@ int ipr_irq_demux(int irq)
return irq; return irq;
} }
#endif #endif
EXPORT_SYMBOL(make_ipr_irq);
arch/sh/kernel/cpu/irq/pint.c
View file @ eafa6cb1
...@@ -84,12 +84,16 @@ void make_pint_irq(unsigned int irq) ...@@ -84,12 +84,16 @@ void make_pint_irq(unsigned int irq)
disable_pint_irq(irq); disable_pint_irq(irq);
} }
static struct ipr_data pint_ipr_map[] = {
{ PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY },
{ PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY },
};
void __init init_IRQ_pint(void) void __init init_IRQ_pint(void)
{ {
int i; int i;
make_ipr_irq(PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY); make_ipr_irq(pint_ipr_map, ARRAY_SIZE(pint_ipr_map));
make_ipr_irq(PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY);
enable_irq(PINT0_IRQ); enable_irq(PINT0_IRQ);
enable_irq(PINT8_IRQ); enable_irq(PINT8_IRQ);
......
arch/sh/kernel/syscalls.S
View file @ eafa6cb1
...@@ -351,3 +351,6 @@ ENTRY(sys_call_table) ...@@ -351,3 +351,6 @@ ENTRY(sys_call_table)
.long sys_sync_file_range .long sys_sync_file_range
.long sys_tee /* 315 */ .long sys_tee /* 315 */
.long sys_vmsplice .long sys_vmsplice
.long sys_move_pages
.long sys_getcpu
.long sys_epoll_pwait
drivers/video/backlight/hp680_bl.c
View file @ eafa6cb1
...@@ -19,7 +19,7 @@ ...@@ -19,7 +19,7 @@
#include <linux/backlight.h> #include <linux/backlight.h>
#include <asm/cpu/dac.h> #include <asm/cpu/dac.h>
#include <asm/hp6xx/hp6xx.h> #include <asm/hp6xx.h>
#include <asm/hd64461.h> #include <asm/hd64461.h>
#define HP680_MAX_INTENSITY 255 #define HP680_MAX_INTENSITY 255
......
include/asm-sh/irq.h
View file @ eafa6cb1
...@@ -327,11 +327,17 @@ extern unsigned short *irq_mask_register; ...@@ -327,11 +327,17 @@ extern unsigned short *irq_mask_register;
*/ */
void init_IRQ_pint(void); void init_IRQ_pint(void);
struct ipr_data {
unsigned int irq;
unsigned int addr; /* Address of Interrupt Priority Register */
int shift; /* Shifts of the 16-bit data */
int priority; /* The priority */
};
/* /*
* Function for "on chip support modules". * Function for "on chip support modules".
*/ */
extern void make_ipr_irq(unsigned int irq, unsigned int addr, extern void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs);
int pos, int priority);
extern void make_imask_irq(unsigned int irq); extern void make_imask_irq(unsigned int irq);
#if defined(CONFIG_CPU_SUBTYPE_SH7300) #if defined(CONFIG_CPU_SUBTYPE_SH7300)
......
include/asm-sh/unistd.h
View file @ eafa6cb1
...@@ -324,8 +324,11 @@ ...@@ -324,8 +324,11 @@
#define __NR_sync_file_range 314 #define __NR_sync_file_range 314
#define __NR_tee 315 #define __NR_tee 315
#define __NR_vmsplice 316 #define __NR_vmsplice 316
#define __NR_move_pages 317
#define __NR_getcpu 318
#define __NR_epoll_pwait 319
#define NR_syscalls 317 #define NR_syscalls 320
#ifdef __KERNEL__ #ifdef __KERNEL__
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7