Merge master.kernel.org:/home/rmk/linux-2.6-arm

arch/arm/common/scoop.c

@@ -26,6 +26,8 @@ struct scoop_pcmcia_dev *scoop_devs;
 struct  scoop_dev {
 	void  *base;
 	spinlock_t scoop_lock;
+	unsigned short suspend_clr;
+	unsigned short suspend_set;
 	u32 scoop_gpwr;
 };
 
@@ -90,14 +92,24 @@ EXPORT_SYMBOL(reset_scoop);
 EXPORT_SYMBOL(read_scoop_reg);
 EXPORT_SYMBOL(write_scoop_reg);
 
+static void check_scoop_reg(struct scoop_dev *sdev)
+{
+	unsigned short mcr;
+
+	mcr = SCOOP_REG(sdev->base, SCOOP_MCR);
+	if ((mcr & 0x100) == 0)
+		SCOOP_REG(sdev->base, SCOOP_MCR) = 0x0101;
+}
+
 #ifdef CONFIG_PM
 static int scoop_suspend(struct device *dev, pm_message_t state, uint32_t level)
 {
 	if (level == SUSPEND_POWER_DOWN) {
 		struct scoop_dev *sdev = dev_get_drvdata(dev);
 
-		sdev->scoop_gpwr = SCOOP_REG(sdev->base,SCOOP_GPWR);
-		SCOOP_REG(sdev->base,SCOOP_GPWR) = 0;
+		check_scoop_reg(sdev);
+  		sdev->scoop_gpwr = SCOOP_REG(sdev->base, SCOOP_GPWR);
+		SCOOP_REG(sdev->base, SCOOP_GPWR) = (sdev->scoop_gpwr & ~sdev->suspend_clr) | sdev->suspend_set;
 	}
 	return 0;
 }
@@ -107,6 +119,7 @@ static int scoop_resume(struct device *dev, uint32_t level)
 	if (level == RESUME_POWER_ON) {
 		struct scoop_dev *sdev = dev_get_drvdata(dev);
 
+		check_scoop_reg(sdev);
 		SCOOP_REG(sdev->base,SCOOP_GPWR) = sdev->scoop_gpwr;
 	}
 	return 0;
@@ -151,6 +164,9 @@ int __init scoop_probe(struct device *dev)
 	SCOOP_REG(devptr->base, SCOOP_GPCR) = inf->io_dir & 0xffff;
 	SCOOP_REG(devptr->base, SCOOP_GPWR) = inf->io_out & 0xffff;
 
+	devptr->suspend_clr = inf->suspend_clr;
+	devptr->suspend_set = inf->suspend_set;
+
 	return 0;
 }
 

arch/arm/mach-pxa/corgi.c

@@ -36,6 +36,7 @@
 #include <asm/arch/mmc.h>
 #include <asm/arch/udc.h>
 #include <asm/arch/corgi.h>
+#include <asm/arch/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>

arch/arm/mach-sa1100/collie.c

@@ -111,11 +111,11 @@ static struct mtd_partition collie_partitions[] = {
 
 static void collie_set_vpp(int vpp)
 {
-	write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(SCOOP_GPCR) | COLLIE_SCP_VPEN);
+	write_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPCR) | COLLIE_SCP_VPEN);
 	if (vpp)
-		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) | COLLIE_SCP_VPEN);
+		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) | COLLIE_SCP_VPEN);
 	else
-		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
+		write_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR, read_scoop_reg(&colliescoop_device.dev, SCOOP_GPWR) & ~COLLIE_SCP_VPEN);
 }
 
 static struct flash_platform_data collie_flash_data = {

arch/arm/mm/alignment.c

@@ -330,6 +330,9 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 {
 	unsigned int rd = RD_BITS(instr);
 
+	if (((rd & 1) == 1) || (rd == 14))
+		goto bad;
+
 	ai_dword += 1;
 
 	if (user_mode(regs))
@@ -361,7 +364,8 @@ do_alignment_ldrdstrd(unsigned long addr, unsigned long instr,
 	}
 
 	return TYPE_LDST;
-
+ bad:
+	return TYPE_ERROR;
  fault:
 	return TYPE_FAULT;
 }
@@ -663,6 +667,8 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		else if ((instr & 0x001000f0) == 0x000000d0 || /* LDRD */
 			 (instr & 0x001000f0) == 0x000000f0)   /* STRD */
 			handler = do_alignment_ldrdstrd;
+		else if ((instr & 0x01f00ff0) == 0x01000090) /* SWP */
+			goto swp;
 		else
 			goto bad;
 		break;
@@ -733,6 +739,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 	do_bad_area(current, current->mm, addr, fsr, regs);
 	return 0;
 
+ swp:
+	printk(KERN_ERR "Alignment trap: not handling swp instruction\n");
+
  bad:
 	/*
 	 * Oops, we didn't handle the instruction.

arch/arm/tools/mach-types

@@ -2,11 +2,17 @@
 #
 # This file is linux/arch/arm/tools/mach-types
 #
+# Up to date versions of this file can be obtained from:
+#
+#   http://www.arm.linux.org.uk/developer/machines/?action=download
+#
 # Please do not send patches to this file; it is automatically generated!
 # To add an entry into this database, please see Documentation/arm/README,
-# or contact rmk@arm.linux.org.uk
+# or visit:
+#
+#   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Thu Jun 23 20:19:33 2005
+# Last update: Mon Oct 10 09:46:25 2005
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -421,7 +427,7 @@ mt02			MACH_MT02		MT02			410
 mport3s			MACH_MPORT3S		MPORT3S			411
 ra_alpha		MACH_RA_ALPHA		RA_ALPHA		412
 xcep			MACH_XCEP		XCEP			413
-arcom_mercury		MACH_ARCOM_MERCURY	ARCOM_MERCURY		414
+arcom_vulcan		MACH_ARCOM_VULCAN	ARCOM_VULCAN		414
 stargate		MACH_STARGATE		STARGATE		415
 armadilloj		MACH_ARMADILLOJ		ARMADILLOJ		416
 elroy_jack		MACH_ELROY_JACK		ELROY_JACK		417
@@ -454,7 +460,7 @@ esl_sarva		MACH_ESL_SARVA		ESL_SARVA		443
 xm250			MACH_XM250		XM250			444
 t6tc1xb			MACH_T6TC1XB		T6TC1XB			445
 ess710			MACH_ESS710		ESS710			446
-mx3ads			MACH_MX3ADS		MX3ADS			447
+mx31ads			MACH_MX3ADS		MX3ADS			447
 himalaya		MACH_HIMALAYA		HIMALAYA		448
 bolfenk			MACH_BOLFENK		BOLFENK			449
 at91rm9200kr		MACH_AT91RM9200KR	AT91RM9200KR		450
@@ -787,3 +793,79 @@ ez_ixp42x		MACH_EZ_IXP42X		EZ_IXP42X		778
 tapwave_zodiac		MACH_TAPWAVE_ZODIAC	TAPWAVE_ZODIAC		779
 universalmeter		MACH_UNIVERSALMETER	UNIVERSALMETER		780
 hicoarm9		MACH_HICOARM9		HICOARM9		781
+pnx4008			MACH_PNX4008		PNX4008			782
+kws6000			MACH_KWS6000		KWS6000			783
+portux920t		MACH_PORTUX920T		PORTUX920T		784
+ez_x5			MACH_EZ_X5		EZ_X5			785
+omap_rudolph		MACH_OMAP_RUDOLPH	OMAP_RUDOLPH		786
+cpuat91			MACH_CPUAT91		CPUAT91			787
+rea9200			MACH_REA9200		REA9200			788
+acts_pune_sa1110	MACH_ACTS_PUNE_SA1110	ACTS_PUNE_SA1110	789
+ixp425			MACH_IXP425		IXP425			790
+argonplusodyssey	MACH_ODYSSEY		ODYSSEY			791
+perch			MACH_PERCH		PERCH			792
+eis05r1			MACH_EIS05R1		EIS05R1			793
+pepperpad		MACH_PEPPERPAD		PEPPERPAD		794
+sb3010			MACH_SB3010		SB3010			795
+rm9200			MACH_RM9200		RM9200			796
+dma03			MACH_DMA03		DMA03			797
+road_s101		MACH_ROAD_S101		ROAD_S101		798
+iq_nextgen_a		MACH_IQ_NEXTGEN_A	IQ_NEXTGEN_A		799
+iq_nextgen_b		MACH_IQ_NEXTGEN_B	IQ_NEXTGEN_B		800
+iq_nextgen_c		MACH_IQ_NEXTGEN_C	IQ_NEXTGEN_C		801
+iq_nextgen_d		MACH_IQ_NEXTGEN_D	IQ_NEXTGEN_D		802
+iq_nextgen_e		MACH_IQ_NEXTGEN_E	IQ_NEXTGEN_E		803
+mallow_at91		MACH_MALLOW_AT91	MALLOW_AT91		804
+cybertracker		MACH_CYBERTRACKER	CYBERTRACKER		805
+gesbc931x		MACH_GESBC931X		GESBC931X		806
+centipad		MACH_CENTIPAD		CENTIPAD		807
+armsoc			MACH_ARMSOC		ARMSOC			808
+se4200			MACH_SE4200		SE4200			809
+ems197a			MACH_EMS197A		EMS197A			810
+micro9			MACH_MICRO9		MICRO9			811
+micro9l			MACH_MICRO9L		MICRO9L			812
+uc5471dsp		MACH_UC5471DSP		UC5471DSP		813
+sj5471eng		MACH_SJ5471ENG		SJ5471ENG		814
+none			MACH_CMPXA26X		CMPXA26X		815
+nc			MACH_NC			NC			816
+omap_palmte		MACH_OMAP_PALMTE	OMAP_PALMTE		817
+ajax52x			MACH_AJAX52X		AJAX52X			818
+siriustar		MACH_SIRIUSTAR		SIRIUSTAR		819
+iodata_hdlg		MACH_IODATA_HDLG	IODATA_HDLG		820
+at91rm9200utl		MACH_AT91RM9200UTL	AT91RM9200UTL		821
+biosafe			MACH_BIOSAFE		BIOSAFE			822
+mp1000			MACH_MP1000		MP1000			823
+parsy			MACH_PARSY		PARSY			824
+ccxp270			MACH_CCXP		CCXP			825
+omap_gsample		MACH_OMAP_GSAMPLE	OMAP_GSAMPLE		826
+realview_eb		MACH_REALVIEW_EB	REALVIEW_EB		827
+samoa			MACH_SAMOA		SAMOA			828
+t3xscale		MACH_T3XSCALE		T3XSCALE		829
+i878			MACH_I878		I878			830
+borzoi			MACH_BORZOI		BORZOI			831
+gecko			MACH_GECKO		GECKO			832
+ds101			MACH_DS101		DS101			833
+omap_palmtt2		MACH_OMAP_PALMTT2	OMAP_PALMTT2		834
+xscale_palmld		MACH_XSCALE_PALMLD	XSCALE_PALMLD		835
+cc9c			MACH_CC9C		CC9C			836
+sbc1670			MACH_SBC1670		SBC1670			837
+ixdp28x5		MACH_IXDP28X5		IXDP28X5		838
+omap_palmtt		MACH_OMAP_PALMTT	OMAP_PALMTT		839
+ml696k			MACH_ML696K		ML696K			840
+arcom_zeus		MACH_ARCOM_ZEUS		ARCOM_ZEUS		841
+osiris			MACH_OSIRIS		OSIRIS			842
+maestro			MACH_MAESTRO		MAESTRO			843
+tunge2			MACH_TUNGE2		TUNGE2			844
+ixbbm			MACH_IXBBM		IXBBM			845
+mx27			MACH_MX27		MX27			846
+ax8004			MACH_AX8004		AX8004			847
+at91sam9261ek		MACH_AT91SAM9261EK	AT91SAM9261EK		848
+loft			MACH_LOFT		LOFT			849
+magpie			MACH_MAGPIE		MAGPIE			850
+mx21			MACH_MX21		MX21			851
+mb87m3400		MACH_MB87M3400		MB87M3400		852
+mguard_delta		MACH_MGUARD_DELTA	MGUARD_DELTA		853
+davinci_dvdp		MACH_DAVINCI_DVDP	DAVINCI_DVDP		854
+htcuniversal		MACH_HTCUNIVERSAL	HTCUNIVERSAL		855
+tpad			MACH_TPAD		TPAD			856
+roverp3			MACH_ROVERP3		ROVERP3			857

drivers/char/s3c2410-rtc.c

@@ -564,6 +564,7 @@ static int s3c2410_rtc_resume(struct device *dev, u32 level)
 
 static struct device_driver s3c2410_rtcdrv = {
 	.name		= "s3c2410-rtc",
+	.owner		= THIS_MODULE,
 	.bus		= &platform_bus_type,
 	.probe		= s3c2410_rtc_probe,
 	.remove		= s3c2410_rtc_remove,

drivers/serial/imx.c

@@ -383,11 +383,11 @@ static int imx_startup(struct uart_port *port)
 	 */
 	retval = request_irq(sport->rxirq, imx_rxint, 0,
 			     DRIVER_NAME, sport);
-	if (retval) goto error_out2;
+	if (retval) goto error_out1;
 
 	retval = request_irq(sport->txirq, imx_txint, 0,
 			     "imx-uart", sport);
-	if (retval) goto error_out1;
+	if (retval) goto error_out2;
 
 	/*
 	 * Finally, clear and enable interrupts
@@ -406,10 +406,9 @@ static int imx_startup(struct uart_port *port)
 
 	return 0;
 
-error_out1:
-	free_irq(sport->rxirq, sport);
 error_out2:
-	free_irq(sport->txirq, sport);
+	free_irq(sport->rxirq, sport);
+error_out1:
 	return retval;
 }
 

drivers/serial/s3c2410.c

@@ -1235,6 +1235,7 @@ static int s3c2400_serial_probe(struct device *dev)
 
 static struct device_driver s3c2400_serial_drv = {
 	.name		= "s3c2400-uart",
+	.owner		= THIS_MODULE,
 	.bus		= &platform_bus_type,
 	.probe		= s3c2400_serial_probe,
 	.remove		= s3c24xx_serial_remove,
@@ -1338,6 +1339,7 @@ static int s3c2410_serial_probe(struct device *dev)
 
 static struct device_driver s3c2410_serial_drv = {
 	.name		= "s3c2410-uart",
+	.owner		= THIS_MODULE,
 	.bus		= &platform_bus_type,
 	.probe		= s3c2410_serial_probe,
 	.remove		= s3c24xx_serial_remove,
@@ -1499,6 +1501,7 @@ static int s3c2440_serial_probe(struct device *dev)
 
 static struct device_driver s3c2440_serial_drv = {
 	.name		= "s3c2440-uart",
+	.owner		= THIS_MODULE,
 	.bus		= &platform_bus_type,
 	.probe		= s3c2440_serial_probe,
 	.remove		= s3c24xx_serial_remove,

include/asm-arm/arch-imx/imx-regs.h

@@ -215,7 +215,7 @@
 #define PC31_AOUT_UART3_RX   ( GPIO_GIUS | GPIO_PORTC | GPIO_IN | 31)
 #define PD6_PF_LSCLK         ( GPIO_PORTD | GPIO_OUT | GPIO_PF | 6 )
 #define PD7_PF_REV           ( GPIO_PORTD | GPIO_PF | 7 )
-#define PD7_AF_UART2_DTR     ( GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
+#define PD7_AF_UART2_DTR     ( GPIO_GIUS | GPIO_PORTD | GPIO_IN | GPIO_AF | 7 )
 #define PD7_AIN_SPI2_SCLK    ( GPIO_GIUS | GPIO_PORTD | GPIO_AIN | 7 )
 #define PD8_PF_CLS           ( GPIO_PORTD | GPIO_PF | 8 )
 #define PD8_AF_UART2_DCD     ( GPIO_PORTD | GPIO_OUT | GPIO_AF | 8 )

include/asm-arm/hardware/scoop.h

@@ -38,6 +38,8 @@
 struct scoop_config {
 	unsigned short io_out;
 	unsigned short io_dir;
+	unsigned short suspend_clr;
+	unsigned short suspend_set;
 };
 
 /* Structure for linking scoop devices to PCMCIA sockets */