Commit eba17e68 authored by Mark Brown's avatar Mark Brown

Merge branch 'topic/input' of...

Merge branch 'topic/input' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-cs42l51

Conflicts:
	sound/soc/codecs/Kconfig
parents 1025c05f c894e394
...@@ -40,7 +40,7 @@ config SND_SOC_ALL_CODECS ...@@ -40,7 +40,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_ALC5632 if I2C select SND_SOC_ALC5632 if I2C
select SND_SOC_CQ0093VC if MFD_DAVINCI_VOICECODEC select SND_SOC_CQ0093VC if MFD_DAVINCI_VOICECODEC
select SND_SOC_CS42L51_I2C if I2C select SND_SOC_CS42L51_I2C if I2C
select SND_SOC_CS42L52 if I2C select SND_SOC_CS42L52 if I2C && INPUT
select SND_SOC_CS42L73 if I2C select SND_SOC_CS42L73 if I2C
select SND_SOC_CS4270 if I2C select SND_SOC_CS4270 if I2C
select SND_SOC_CS4271 if SND_SOC_I2C_AND_SPI select SND_SOC_CS4271 if SND_SOC_I2C_AND_SPI
...@@ -127,7 +127,7 @@ config SND_SOC_ALL_CODECS ...@@ -127,7 +127,7 @@ config SND_SOC_ALL_CODECS
select SND_SOC_WM8955 if I2C select SND_SOC_WM8955 if I2C
select SND_SOC_WM8960 if I2C select SND_SOC_WM8960 if I2C
select SND_SOC_WM8961 if I2C select SND_SOC_WM8961 if I2C
select SND_SOC_WM8962 if I2C select SND_SOC_WM8962 if I2C && INPUT
select SND_SOC_WM8971 if I2C select SND_SOC_WM8971 if I2C
select SND_SOC_WM8974 if I2C select SND_SOC_WM8974 if I2C
select SND_SOC_WM8978 if I2C select SND_SOC_WM8978 if I2C
...@@ -286,7 +286,7 @@ config SND_SOC_CS42L51_I2C ...@@ -286,7 +286,7 @@ config SND_SOC_CS42L51_I2C
config SND_SOC_CS42L52 config SND_SOC_CS42L52
tristate "Cirrus Logic CS42L52 CODEC" tristate "Cirrus Logic CS42L52 CODEC"
depends on I2C depends on I2C && INPUT
config SND_SOC_CS42L73 config SND_SOC_CS42L73
tristate "Cirrus Logic CS42L73 CODEC" tristate "Cirrus Logic CS42L73 CODEC"
...@@ -602,7 +602,7 @@ config SND_SOC_WM8961 ...@@ -602,7 +602,7 @@ config SND_SOC_WM8961
config SND_SOC_WM8962 config SND_SOC_WM8962
tristate "Wolfson Microelectronics WM8962 CODEC" tristate "Wolfson Microelectronics WM8962 CODEC"
depends on I2C depends on I2C && INPUT
config SND_SOC_WM8971 config SND_SOC_WM8971
tristate tristate
......
...@@ -50,11 +50,9 @@ struct cs42l52_private { ...@@ -50,11 +50,9 @@ struct cs42l52_private {
u8 mclksel; u8 mclksel;
u32 mclk; u32 mclk;
u8 flags; u8 flags;
#if IS_ENABLED(CONFIG_INPUT)
struct input_dev *beep; struct input_dev *beep;
struct work_struct beep_work; struct work_struct beep_work;
int beep_rate; int beep_rate;
#endif
}; };
static const struct reg_default cs42l52_reg_defaults[] = { static const struct reg_default cs42l52_reg_defaults[] = {
...@@ -962,7 +960,6 @@ static int cs42l52_resume(struct snd_soc_codec *codec) ...@@ -962,7 +960,6 @@ static int cs42l52_resume(struct snd_soc_codec *codec)
return 0; return 0;
} }
#if IS_ENABLED(CONFIG_INPUT)
static int beep_rates[] = { static int beep_rates[] = {
261, 522, 585, 667, 706, 774, 889, 1000, 261, 522, 585, 667, 706, 774, 889, 1000,
1043, 1200, 1333, 1412, 1600, 1714, 2000, 2182 1043, 1200, 1333, 1412, 1600, 1714, 2000, 2182
...@@ -1096,15 +1093,6 @@ static void cs42l52_free_beep(struct snd_soc_codec *codec) ...@@ -1096,15 +1093,6 @@ static void cs42l52_free_beep(struct snd_soc_codec *codec)
snd_soc_update_bits(codec, CS42L52_BEEP_TONE_CTL, snd_soc_update_bits(codec, CS42L52_BEEP_TONE_CTL,
CS42L52_BEEP_EN_MASK, 0); CS42L52_BEEP_EN_MASK, 0);
} }
#else
static void cs42l52_init_beep(struct snd_soc_codec *codec)
{
}
static void cs42l52_free_beep(struct snd_soc_codec *codec)
{
}
#endif
static int cs42l52_probe(struct snd_soc_codec *codec) static int cs42l52_probe(struct snd_soc_codec *codec)
{ {
......
...@@ -74,11 +74,9 @@ struct wm8962_priv { ...@@ -74,11 +74,9 @@ struct wm8962_priv {
struct regulator_bulk_data supplies[WM8962_NUM_SUPPLIES]; struct regulator_bulk_data supplies[WM8962_NUM_SUPPLIES];
struct notifier_block disable_nb[WM8962_NUM_SUPPLIES]; struct notifier_block disable_nb[WM8962_NUM_SUPPLIES];
#if IS_ENABLED(CONFIG_INPUT)
struct input_dev *beep; struct input_dev *beep;
struct work_struct beep_work; struct work_struct beep_work;
int beep_rate; int beep_rate;
#endif
#ifdef CONFIG_GPIOLIB #ifdef CONFIG_GPIOLIB
struct gpio_chip gpio_chip; struct gpio_chip gpio_chip;
...@@ -3145,7 +3143,6 @@ int wm8962_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack) ...@@ -3145,7 +3143,6 @@ int wm8962_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack)
} }
EXPORT_SYMBOL_GPL(wm8962_mic_detect); EXPORT_SYMBOL_GPL(wm8962_mic_detect);
#if IS_ENABLED(CONFIG_INPUT)
static int beep_rates[] = { static int beep_rates[] = {
500, 1000, 2000, 4000, 500, 1000, 2000, 4000,
}; };
...@@ -3277,15 +3274,6 @@ static void wm8962_free_beep(struct snd_soc_codec *codec) ...@@ -3277,15 +3274,6 @@ static void wm8962_free_beep(struct snd_soc_codec *codec)
snd_soc_update_bits(codec, WM8962_BEEP_GENERATOR_1, WM8962_BEEP_ENA,0); snd_soc_update_bits(codec, WM8962_BEEP_GENERATOR_1, WM8962_BEEP_ENA,0);
} }
#else
static void wm8962_init_beep(struct snd_soc_codec *codec)
{
}
static void wm8962_free_beep(struct snd_soc_codec *codec)
{
}
#endif
static void wm8962_set_gpio_mode(struct wm8962_priv *wm8962, int gpio) static void wm8962_set_gpio_mode(struct wm8962_priv *wm8962, int gpio)
{ {
......
...@@ -187,7 +187,7 @@ config SND_SOC_EUKREA_TLV320 ...@@ -187,7 +187,7 @@ config SND_SOC_EUKREA_TLV320
config SND_SOC_IMX_WM8962 config SND_SOC_IMX_WM8962
tristate "SoC Audio support for i.MX boards with wm8962" tristate "SoC Audio support for i.MX boards with wm8962"
depends on OF && I2C depends on OF && I2C && INPUT
select SND_SOC_WM8962 select SND_SOC_WM8962
select SND_SOC_IMX_PCM_DMA select SND_SOC_IMX_PCM_DMA
select SND_SOC_IMX_AUDMUX select SND_SOC_IMX_AUDMUX
......
...@@ -204,7 +204,7 @@ config SND_SOC_SPEYSIDE ...@@ -204,7 +204,7 @@ config SND_SOC_SPEYSIDE
config SND_SOC_TOBERMORY config SND_SOC_TOBERMORY
tristate "Audio support for Wolfson Tobermory" tristate "Audio support for Wolfson Tobermory"
depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 depends on SND_SOC_SAMSUNG && MACH_WLF_CRAGG_6410 && INPUT
select SND_SAMSUNG_I2S select SND_SAMSUNG_I2S
select SND_SOC_WM8962 select SND_SOC_WM8962
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment