Commit eca985d2 authored by Krzysztof Helt's avatar Krzysztof Helt Committed by Takashi Iwai

sound: Remove documentation for OSS CS4232 driver

There is no OSS cs4232 driver in the kernel
any more and this documentation does not
contain any info useful for ALSA driver.
Signed-off-by: default avatarKrzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
parent 4dd3a29f
To configure the Crystal CS423x sound chip and activate its DSP functions,
modules may be loaded in this order:
modprobe sound
insmod ad1848
insmod uart401
insmod cs4232 io=* irq=* dma=* dma2=*
This is the meaning of the parameters:
io--I/O address of the Windows Sound System (normally 0x534)
irq--IRQ of this device
dma and dma2--DMA channels (DMA2 may be 0)
On some cards, the board attempts to do non-PnP setup, and fails. If you
have problems, use Linux' PnP facilities.
To get MIDI facilities add
insmod opl3 io=*
where "io" is the I/O address of the OPL3 synthesizer. This will be shown
in /proc/sys/pnp and is normally 0x388.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment