Commit ecfb7062 authored by Anton Blanchard's avatar Anton Blanchard

Merge samba.org:/scratch/anton/linux-2.5

into samba.org:/scratch/anton/linux-2.5_ppc64
parents a9907091 e5709091
......@@ -59,15 +59,14 @@ unsigned long eeh_token(unsigned long phb, unsigned long bus, unsigned long devf
return ((IO_UNMAPPED_REGION_ID << 60) | (phb << 48UL) | ((bus & 0xff) << 40UL) | (devfn << 32UL) | (offset & 0xffffffff));
}
int eeh_get_state(unsigned long ea) {
int eeh_get_state(unsigned long ea)
{
return 0;
}
/* Check for an eeh failure at the given token address.
* The given value has been read and it should be 1's (0xff, 0xffff or 0xffffffff).
* The given value has been read and it should be 1's (0xff, 0xffff or
* 0xffffffff).
*
* Probe to determine if an error actually occurred. If not return val.
* Otherwise panic.
......@@ -113,7 +112,8 @@ unsigned long eeh_check_failure(void *token, unsigned long val)
return val; /* good case */
}
void eeh_init(void) {
void eeh_init(void)
{
extern char cmd_line[]; /* Very early cmd line parse. Cheap, but works. */
char *eeh_force_off = strstr(cmd_line, "eeh-force-off");
char *eeh_force_on = strstr(cmd_line, "eeh-force-on");
......@@ -121,7 +121,7 @@ void eeh_init(void) {
ibm_set_eeh_option = rtas_token("ibm,set-eeh-option");
ibm_set_slot_reset = rtas_token("ibm,set-slot-reset");
ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state");
if (ibm_set_eeh_option != RTAS_UNKNOWN_SERVICE && naca->platform == PLATFORM_PSERIES_LPAR)
if (ibm_set_eeh_option != RTAS_UNKNOWN_SERVICE)
eeh_implemented = 1;
if (eeh_force_off > eeh_force_on) {
......@@ -334,6 +334,7 @@ static int __init eehoff_parm(char *str)
{
return eeh_parm(str, 0);
}
static int __init eehon_parm(char *str)
{
return eeh_parm(str, 1);
......
......@@ -353,7 +353,7 @@ recheck:
li r4,0
ori r4,r4,MSR_EE|MSR_RI
andc r10,r10,r4 /* clear MSR_EE and MSR_RI */
mtmsrd r10 /* Update machine state */
mtmsrd r10,1 /* Update machine state */
#ifdef CONFIG_PPC_ISERIES
#error fix iSeries soft disable
......@@ -411,7 +411,7 @@ restore:
do_work:
/* Enable interrupts */
ori r10,r10,MSR_EE|MSR_RI
mtmsrd r10
mtmsrd r10,1
andi. r0,r3,_TIF_NEED_RESCHED
beq 1f
......
......@@ -45,9 +45,7 @@
#include <asm/lmb.h>
#include <asm/abs_addr.h>
#include <asm/tlbflush.h>
#ifdef CONFIG_PPC_EEH
#include <asm/eeh.h>
#endif
/*
* Note: pte --> Linux PTE
......@@ -346,13 +344,11 @@ int hash_page(unsigned long ea, unsigned long access)
mm = &init_mm;
vsid = get_kernel_vsid(ea);
break;
#ifdef CONFIG_PPC_EEH
case IO_UNMAPPED_REGION_ID:
udbg_printf("EEH Error ea = 0x%lx\n", ea);
PPCDBG_ENTER_DEBUGGER();
panic("EEH Error ea = 0x%lx\n", ea);
break;
#endif
case KERNEL_REGION_ID:
/*
* As htab_initialize is now, we shouldn't ever get here since
......
......@@ -100,9 +100,6 @@ void proc_ppc64_init(void)
if (!proc_ppc64_root) return;
spin_unlock(&proc_ppc64_lock);
#ifdef CONFIG_PPC_EEH
eeh_init_proc(proc_ppc64_root);
#endif
proc_ppc64_pmc_root = proc_mkdir("pmc", proc_ppc64_root);
......
......@@ -1021,7 +1021,7 @@ static void handle_signal32(unsigned long sig, siginfo_t *info,
|| __put_user(sig,&rt_stack_frame->uc.uc_mcontext.signal))
goto badframe;
} else {
/* Put another sigcontext on the stack */
/* Put a sigcontext on the stack */
*newspp -= sizeof(*sc);
sc = (struct sigcontext32_struct *)(u64)*newspp;
if (verify_area(VERIFY_WRITE, sc, sizeof(*sc)))
......
/*
*
*
* PowerPC version
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
......@@ -62,8 +60,6 @@
#include <asm/ppcdebug.h>
#define PGTOKB(pages) (((pages) * PAGE_SIZE) >> 10)
#ifdef CONFIG_PPC_ISERIES
#include <asm/iSeries/iSeries_dma.h>
#endif
......@@ -78,13 +74,10 @@ extern pgd_t swapper_pg_dir[];
extern char __init_begin, __init_end;
extern char __chrp_begin, __chrp_end;
extern char __openfirmware_begin, __openfirmware_end;
extern struct _of_tce_table of_tce_table[];
extern char _start[], _end[];
extern char _stext[], etext[];
extern struct task_struct *current_set[NR_CPUS];
void mm_init_ppc64(void);
extern pgd_t ioremap_dir[];
pgd_t * ioremap_pgd = (pgd_t *)&ioremap_dir;
......@@ -463,7 +456,6 @@ void __init do_init_bootmem(void)
unsigned long start, bootmap_pages;
unsigned long total_pages = lmb_end_of_DRAM() >> PAGE_SHIFT;
PPCDBG(PPCDBG_MMINIT, "do_init_bootmem: start\n");
/*
* Find an area to use for the bootmem bitmap. Calculate the size of
* bitmap required as (Total Memory) / PAGE_SIZE / BITS_PER_BYTE.
......@@ -472,21 +464,16 @@ void __init do_init_bootmem(void)
bootmap_pages = bootmem_bootmap_pages(total_pages);
start = (unsigned long)__a2p(lmb_alloc(bootmap_pages<<PAGE_SHIFT, PAGE_SIZE));
if( start == 0 ) {
if (start == 0) {
udbg_printf("do_init_bootmem: failed to allocate a bitmap.\n");
udbg_printf("\tbootmap_pages = 0x%lx.\n", bootmap_pages);
PPCDBG_ENTER_DEBUGGER();
}
PPCDBG(PPCDBG_MMINIT, "\tstart = 0x%lx\n", start);
PPCDBG(PPCDBG_MMINIT, "\tbootmap_pages = 0x%lx\n", bootmap_pages);
PPCDBG(PPCDBG_MMINIT, "\tphysicalMemorySize = 0x%lx\n", naca->physicalMemorySize);
boot_mapsize = init_bootmem(start >> PAGE_SHIFT, total_pages);
PPCDBG(PPCDBG_MMINIT, "\tboot_mapsize = 0x%lx\n", boot_mapsize);
/* add all physical memory to the bootmem map */
for (i=0; i < lmb.memory.cnt ;i++) {
for (i=0; i < lmb.memory.cnt; i++) {
unsigned long physbase, size;
unsigned long type = lmb.memory.region[i].type;
......@@ -497,19 +484,14 @@ void __init do_init_bootmem(void)
size = lmb.memory.region[i].size;
free_bootmem(physbase, size);
}
/* reserve the sections we're already using */
for (i=0; i < lmb.reserved.cnt ;i++) {
for (i=0; i < lmb.reserved.cnt; i++) {
unsigned long physbase = lmb.reserved.region[i].physbase;
unsigned long size = lmb.reserved.region[i].size;
#if 0 /* PPPBBB */
if ( (physbase == 0) && (size < (16<<20)) ) {
size = 16 << 20;
}
#endif
reserve_bootmem(physbase, size);
}
PPCDBG(PPCDBG_MMINIT, "do_init_bootmem: end\n");
}
/*
......@@ -522,7 +504,7 @@ void __init paging_init(void)
/*
* All pages are DMA-able so we put them all in the DMA zone.
*/
zones_size[0] = lmb_end_of_DRAM() >> PAGE_SHIFT;
zones_size[ZONE_DMA] = lmb_end_of_DRAM() >> PAGE_SHIFT;
for (i = 1; i < MAX_NR_ZONES; i++)
zones_size[i] = 0;
free_area_init(zones_size);
......@@ -554,14 +536,6 @@ void __init mem_init(void)
totalram_pages += free_all_bootmem();
ifppcdebug(PPCDBG_MMINIT) {
udbg_printf("mem_init: totalram_pages = 0x%lx\n", totalram_pages);
udbg_printf("mem_init: va_rtas_base = 0x%lx\n", va_rtas_base);
udbg_printf("mem_init: va_rtas_end = 0x%lx\n", PAGE_ALIGN(va_rtas_base+rtas.size));
udbg_printf("mem_init: pinned start = 0x%lx\n", __va(0));
udbg_printf("mem_init: pinned end = 0x%lx\n", PAGE_ALIGN(klimit));
}
if ( sysmap_size )
for (addr = (unsigned long)sysmap;
addr < PAGE_ALIGN((unsigned long)sysmap+sysmap_size) ;
......@@ -620,12 +594,13 @@ void flush_icache_page(struct vm_area_struct *vma, struct page *page)
}
}
void clear_user_page(void *page, unsigned long vaddr)
void clear_user_page(void *page, unsigned long vaddr, struct page *pg)
{
clear_page(page);
}
void copy_user_page(void *vto, void *vfrom, unsigned long vaddr)
void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
struct page *pg)
{
copy_page(vto, vfrom);
__flush_dcache_icache(vto);
......
......@@ -70,8 +70,8 @@ static __inline__ void clear_page(void *addr)
extern void copy_page(void *to, void *from);
struct page;
extern void clear_user_page(void *page, unsigned long vaddr);
extern void copy_user_page(void *to, void *from, unsigned long vaddr);
extern void clear_user_page(void *page, unsigned long vaddr, struct page *pg);
extern void copy_user_page(void *to, void *from, unsigned long vaddr, struct page *p);
#ifdef STRICT_MM_TYPECHECKS
/*
......
......@@ -53,6 +53,8 @@ pmd_free(pmd_t *pmd)
free_page((unsigned long)pmd);
}
#define pmd_free_tlb(tlb, pmd) pmd_free(pmd)
#define pmd_populate_kernel(mm, pmd, pte) pmd_set(pmd, pte)
#define pmd_populate(mm, pmd, pte_page) \
pmd_populate_kernel(mm, pmd, page_address(pte_page))
......@@ -86,6 +88,7 @@ pte_free_kernel(pte_t *pte)
}
#define pte_free(pte_page) pte_free_kernel(page_address(pte_page))
#define pte_free_tlb(tlb, pte) pte_free(pte)
#define check_pgt_cache() do { } while (0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment