Commit ed74ca6d authored by Ingo Molnar's avatar Ingo Molnar

x86, voyager: move Voyager-specific defines to voyager.h

They dont belong into the generic headers.
Signed-off-by: default avatarIngo Molnar <mingo@elte.hu>
parent 647ad94f
......@@ -84,16 +84,6 @@ extern atomic_t irq_mis_count;
/* EISA */
extern void eisa_set_level_irq(unsigned int irq);
/* Voyager functions */
extern asmlinkage void vic_cpi_interrupt(void);
extern asmlinkage void vic_sys_interrupt(void);
extern asmlinkage void vic_cmn_interrupt(void);
extern asmlinkage void qic_timer_interrupt(void);
extern asmlinkage void qic_invalidate_interrupt(void);
extern asmlinkage void qic_reschedule_interrupt(void);
extern asmlinkage void qic_enable_irq_interrupt(void);
extern asmlinkage void qic_call_function_interrupt(void);
/* SMP */
extern void smp_apic_timer_interrupt(struct pt_regs *);
extern void smp_spurious_interrupt(struct pt_regs *);
......
......@@ -135,39 +135,4 @@
#endif
/* Voyager specific defines */
/* These define the CPIs we use in linux */
#define VIC_CPI_LEVEL0 0
#define VIC_CPI_LEVEL1 1
/* now the fake CPIs */
#define VIC_TIMER_CPI 2
#define VIC_INVALIDATE_CPI 3
#define VIC_RESCHEDULE_CPI 4
#define VIC_ENABLE_IRQ_CPI 5
#define VIC_CALL_FUNCTION_CPI 6
#define VIC_CALL_FUNCTION_SINGLE_CPI 7
/* Now the QIC CPIs: Since we don't need the two initial levels,
* these are 2 less than the VIC CPIs */
#define QIC_CPI_OFFSET 1
#define QIC_TIMER_CPI (VIC_TIMER_CPI - QIC_CPI_OFFSET)
#define QIC_INVALIDATE_CPI (VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
#define QIC_RESCHEDULE_CPI (VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
#define QIC_ENABLE_IRQ_CPI (VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
#define QIC_CALL_FUNCTION_CPI (VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
#define QIC_CALL_FUNCTION_SINGLE_CPI (VIC_CALL_FUNCTION_SINGLE_CPI - QIC_CPI_OFFSET)
#define VIC_START_FAKE_CPI VIC_TIMER_CPI
#define VIC_END_FAKE_CPI VIC_CALL_FUNCTION_SINGLE_CPI
/* this is the SYS_INT CPI. */
#define VIC_SYS_INT 8
#define VIC_CMN_INT 15
/* This is the boot CPI for alternate processors. It gets overwritten
* by the above once the system has activated all available processors */
#define VIC_CPU_BOOT_CPI VIC_CPI_LEVEL0
#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8)
#endif /* _ASM_X86_IRQ_VECTORS_H */
......@@ -527,3 +527,45 @@ extern void voyager_smp_intr_init(void);
#define VOYAGER_PSI_SUBREAD 2
#define VOYAGER_PSI_SUBWRITE 3
extern void voyager_cat_psi(__u8, __u16, __u8 *);
/* These define the CPIs we use in linux */
#define VIC_CPI_LEVEL0 0
#define VIC_CPI_LEVEL1 1
/* now the fake CPIs */
#define VIC_TIMER_CPI 2
#define VIC_INVALIDATE_CPI 3
#define VIC_RESCHEDULE_CPI 4
#define VIC_ENABLE_IRQ_CPI 5
#define VIC_CALL_FUNCTION_CPI 6
#define VIC_CALL_FUNCTION_SINGLE_CPI 7
/* Now the QIC CPIs: Since we don't need the two initial levels,
* these are 2 less than the VIC CPIs */
#define QIC_CPI_OFFSET 1
#define QIC_TIMER_CPI (VIC_TIMER_CPI - QIC_CPI_OFFSET)
#define QIC_INVALIDATE_CPI (VIC_INVALIDATE_CPI - QIC_CPI_OFFSET)
#define QIC_RESCHEDULE_CPI (VIC_RESCHEDULE_CPI - QIC_CPI_OFFSET)
#define QIC_ENABLE_IRQ_CPI (VIC_ENABLE_IRQ_CPI - QIC_CPI_OFFSET)
#define QIC_CALL_FUNCTION_CPI (VIC_CALL_FUNCTION_CPI - QIC_CPI_OFFSET)
#define QIC_CALL_FUNCTION_SINGLE_CPI (VIC_CALL_FUNCTION_SINGLE_CPI - QIC_CPI_OFFSET)
#define VIC_START_FAKE_CPI VIC_TIMER_CPI
#define VIC_END_FAKE_CPI VIC_CALL_FUNCTION_SINGLE_CPI
/* this is the SYS_INT CPI. */
#define VIC_SYS_INT 8
#define VIC_CMN_INT 15
/* This is the boot CPI for alternate processors. It gets overwritten
* by the above once the system has activated all available processors */
#define VIC_CPU_BOOT_CPI VIC_CPI_LEVEL0
#define VIC_CPU_BOOT_ERRATA_CPI (VIC_CPI_LEVEL0 + 8)
extern asmlinkage void vic_cpi_interrupt(void);
extern asmlinkage void vic_sys_interrupt(void);
extern asmlinkage void vic_cmn_interrupt(void);
extern asmlinkage void qic_timer_interrupt(void);
extern asmlinkage void qic_invalidate_interrupt(void);
extern asmlinkage void qic_reschedule_interrupt(void);
extern asmlinkage void qic_enable_irq_interrupt(void);
extern asmlinkage void qic_call_function_interrupt(void);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment