Commit ee26a228 authored by Andrew Lunn's avatar Andrew Lunn Committed by David S. Miller

net: dsa: mv88e6xxx: Pass mii_bus to all PHY operations

In preparation for supporting multiple MDIO busses, pass the mii_bus
structure to all PHY operations. It will in future then be clear on
which MDIO bus the operation should be performed.

For reads/write from phylib, the mii_bus is readily available. However
some internal code also access the PHY, e.g. for EEE and SERDES. Make
this code use the one and only currently available MDIO bus.
Signed-off-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent efb3e74d
......@@ -222,14 +222,16 @@ int mv88e6xxx_write(struct mv88e6xxx_chip *chip, int addr, int reg, u16 val)
return 0;
}
static int mv88e6165_phy_read(struct mv88e6xxx_chip *chip, int addr,
int reg, u16 *val)
static int mv88e6165_phy_read(struct mv88e6xxx_chip *chip,
struct mii_bus *bus,
int addr, int reg, u16 *val)
{
return mv88e6xxx_read(chip, addr, reg, val);
}
static int mv88e6165_phy_write(struct mv88e6xxx_chip *chip, int addr,
int reg, u16 val)
static int mv88e6165_phy_write(struct mv88e6xxx_chip *chip,
struct mii_bus *bus,
int addr, int reg, u16 val)
{
return mv88e6xxx_write(chip, addr, reg, val);
}
......@@ -238,22 +240,30 @@ static int mv88e6xxx_phy_read(struct mv88e6xxx_chip *chip, int phy,
int reg, u16 *val)
{
int addr = phy; /* PHY devices addresses start at 0x0 */
struct mii_bus *bus = chip->mdio_bus;
if (!chip->info->ops->phy_read)
return -EOPNOTSUPP;
return chip->info->ops->phy_read(chip, addr, reg, val);
if (!bus)
return -EOPNOTSUPP;
return chip->info->ops->phy_read(chip, bus, addr, reg, val);
}
static int mv88e6xxx_phy_write(struct mv88e6xxx_chip *chip, int phy,
int reg, u16 val)
{
int addr = phy; /* PHY devices addresses start at 0x0 */
struct mii_bus *bus = chip->mdio_bus;
if (!chip->info->ops->phy_write)
return -EOPNOTSUPP;
return chip->info->ops->phy_write(chip, addr, reg, val);
if (!bus)
return -EOPNOTSUPP;
return chip->info->ops->phy_write(chip, bus, addr, reg, val);
}
static int mv88e6xxx_phy_page_get(struct mv88e6xxx_chip *chip, int phy, u8 page)
......@@ -623,8 +633,9 @@ static void mv88e6xxx_ppu_state_destroy(struct mv88e6xxx_chip *chip)
del_timer_sync(&chip->ppu_timer);
}
static int mv88e6xxx_phy_ppu_read(struct mv88e6xxx_chip *chip, int addr,
int reg, u16 *val)
static int mv88e6xxx_phy_ppu_read(struct mv88e6xxx_chip *chip,
struct mii_bus *bus,
int addr, int reg, u16 *val)
{
int err;
......@@ -637,8 +648,9 @@ static int mv88e6xxx_phy_ppu_read(struct mv88e6xxx_chip *chip, int addr,
return err;
}
static int mv88e6xxx_phy_ppu_write(struct mv88e6xxx_chip *chip, int addr,
int reg, u16 val)
static int mv88e6xxx_phy_ppu_write(struct mv88e6xxx_chip *chip,
struct mii_bus *bus,
int addr, int reg, u16 val)
{
int err;
......@@ -2897,8 +2909,11 @@ static int mv88e6xxx_mdio_read(struct mii_bus *bus, int phy, int reg)
if (phy >= mv88e6xxx_num_ports(chip))
return 0xffff;
if (!chip->info->ops->phy_read)
return -EOPNOTSUPP;
mutex_lock(&chip->reg_lock);
err = mv88e6xxx_phy_read(chip, phy, reg, &val);
err = chip->info->ops->phy_read(chip, bus, phy, reg, &val);
mutex_unlock(&chip->reg_lock);
return err ? err : val;
......@@ -2912,8 +2927,11 @@ static int mv88e6xxx_mdio_write(struct mii_bus *bus, int phy, int reg, u16 val)
if (phy >= mv88e6xxx_num_ports(chip))
return 0xffff;
if (!chip->info->ops->phy_write)
return -EOPNOTSUPP;
mutex_lock(&chip->reg_lock);
err = mv88e6xxx_phy_write(chip, phy, reg, val);
err = chip->info->ops->phy_write(chip, bus, phy, reg, val);
mutex_unlock(&chip->reg_lock);
return err;
......
......@@ -501,8 +501,9 @@ static int mv88e6xxx_g2_smi_phy_cmd(struct mv88e6xxx_chip *chip, u16 cmd)
return mv88e6xxx_g2_smi_phy_wait(chip);
}
int mv88e6xxx_g2_smi_phy_read(struct mv88e6xxx_chip *chip, int addr, int reg,
u16 *val)
int mv88e6xxx_g2_smi_phy_read(struct mv88e6xxx_chip *chip,
struct mii_bus *bus,
int addr, int reg, u16 *val)
{
u16 cmd = GLOBAL2_SMI_PHY_CMD_OP_22_READ_DATA | (addr << 5) | reg;
int err;
......@@ -518,8 +519,9 @@ int mv88e6xxx_g2_smi_phy_read(struct mv88e6xxx_chip *chip, int addr, int reg,
return mv88e6xxx_g2_read(chip, GLOBAL2_SMI_PHY_DATA, val);
}
int mv88e6xxx_g2_smi_phy_write(struct mv88e6xxx_chip *chip, int addr, int reg,
u16 val)
int mv88e6xxx_g2_smi_phy_write(struct mv88e6xxx_chip *chip,
struct mii_bus *bus,
int addr, int reg, u16 val)
{
u16 cmd = GLOBAL2_SMI_PHY_CMD_OP_22_WRITE_DATA | (addr << 5) | reg;
int err;
......
......@@ -23,10 +23,12 @@ static inline int mv88e6xxx_g2_require(struct mv88e6xxx_chip *chip)
return 0;
}
int mv88e6xxx_g2_smi_phy_read(struct mv88e6xxx_chip *chip, int addr, int reg,
u16 *val);
int mv88e6xxx_g2_smi_phy_write(struct mv88e6xxx_chip *chip, int addr, int reg,
u16 val);
int mv88e6xxx_g2_smi_phy_read(struct mv88e6xxx_chip *chip,
struct mii_bus *bus,
int addr, int reg, u16 *val);
int mv88e6xxx_g2_smi_phy_write(struct mv88e6xxx_chip *chip,
struct mii_bus *bus,
int addr, int reg, u16 val);
int mv88e6xxx_g2_set_switch_mac(struct mv88e6xxx_chip *chip, u8 *addr);
int mv88e6xxx_g2_get_eeprom8(struct mv88e6xxx_chip *chip,
......@@ -57,12 +59,14 @@ static inline int mv88e6xxx_g2_require(struct mv88e6xxx_chip *chip)
}
static inline int mv88e6xxx_g2_smi_phy_read(struct mv88e6xxx_chip *chip,
struct mii_bus *bus,
int addr, int reg, u16 *val)
{
return -EOPNOTSUPP;
}
static inline int mv88e6xxx_g2_smi_phy_write(struct mv88e6xxx_chip *chip,
struct mii_bus *bus,
int addr, int reg, u16 val)
{
return -EOPNOTSUPP;
......
......@@ -758,10 +758,12 @@ struct mv88e6xxx_ops {
int (*set_switch_mac)(struct mv88e6xxx_chip *chip, u8 *addr);
int (*phy_read)(struct mv88e6xxx_chip *chip, int addr, int reg,
u16 *val);
int (*phy_write)(struct mv88e6xxx_chip *chip, int addr, int reg,
u16 val);
int (*phy_read)(struct mv88e6xxx_chip *chip,
struct mii_bus *bus,
int addr, int reg, u16 *val);
int (*phy_write)(struct mv88e6xxx_chip *chip,
struct mii_bus *bus,
int addr, int reg, u16 val);
/* PHY Polling Unit (PPU) operations */
int (*ppu_enable)(struct mv88e6xxx_chip *chip);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment