Commit eef40162 authored by Hans de Goede's avatar Hans de Goede Committed by Jiri Kosina

HID: i2c-hid: Always sleep 60ms after I2C_HID_PWR_ON commands

Before this commit i2c_hid_parse() consists of the following steps:

1. Send power on cmd
2. usleep_range(1000, 5000)
3. Send reset cmd
4. Wait for reset to complete (device interrupt, or msleep(100))
5. Send power on cmd
6. Try to read HID descriptor

Notice how there is an usleep_range(1000, 5000) after the first power-on
command, but not after the second power-on command.

Testing has shown that at least on the BMAX Y13 laptop's i2c-hid touchpad,
not having a delay after the second power-on command causes the HID
descriptor to read as all zeros.

In case we hit this on other devices too, the descriptor being all zeros
can be recognized by the following message being logged many, many times:

hid-generic 0018:0911:5288.0002: unknown main item tag 0x0

At the same time as the BMAX Y13's touchpad issue was debugged,
Kai-Heng was working on debugging some issues with Goodix i2c-hid
touchpads. It turns out that these need a delay after a PWR_ON command
too, otherwise they stop working after a suspend/resume cycle.
According to Goodix a delay of minimal 60ms is needed.

Having multiple cases where we need a delay after sending the power-on
command, seems to indicate that we should always sleep after the power-on
command.

This commit fixes the mentioned issues by moving the existing 1ms sleep to
the i2c_hid_set_power() function and changing it to a 60ms sleep.

Cc: stable@vger.kernel.org
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208247Reported-by: default avatarKai-Heng Feng <kai.heng.feng@canonical.com>
Reported-and-tested-by: default avatarAndrea Borgia <andrea@borgia.bo.it>
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parent d71c8008
...@@ -420,6 +420,19 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state) ...@@ -420,6 +420,19 @@ static int i2c_hid_set_power(struct i2c_client *client, int power_state)
dev_err(&client->dev, "failed to change power setting.\n"); dev_err(&client->dev, "failed to change power setting.\n");
set_pwr_exit: set_pwr_exit:
/*
* The HID over I2C specification states that if a DEVICE needs time
* after the PWR_ON request, it should utilise CLOCK stretching.
* However, it has been observered that the Windows driver provides a
* 1ms sleep between the PWR_ON and RESET requests.
* According to Goodix Windows even waits 60 ms after (other?)
* PWR_ON requests. Testing has confirmed that several devices
* will not work properly without a delay after a PWR_ON request.
*/
if (!ret && power_state == I2C_HID_PWR_ON)
msleep(60);
return ret; return ret;
} }
...@@ -441,15 +454,6 @@ static int i2c_hid_hwreset(struct i2c_client *client) ...@@ -441,15 +454,6 @@ static int i2c_hid_hwreset(struct i2c_client *client)
if (ret) if (ret)
goto out_unlock; goto out_unlock;
/*
* The HID over I2C specification states that if a DEVICE needs time
* after the PWR_ON request, it should utilise CLOCK stretching.
* However, it has been observered that the Windows driver provides a
* 1ms sleep between the PWR_ON and RESET requests and that some devices
* rely on this.
*/
usleep_range(1000, 5000);
i2c_hid_dbg(ihid, "resetting...\n"); i2c_hid_dbg(ihid, "resetting...\n");
ret = i2c_hid_command(client, &hid_reset_cmd, NULL, 0); ret = i2c_hid_command(client, &hid_reset_cmd, NULL, 0);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment