Commit ef88b7db authored by Linus Torvalds's avatar Linus Torvalds

Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuild

parents f65e7769 aaebf433
...@@ -872,7 +872,13 @@ When kbuild executes the following steps are followed (roughly): ...@@ -872,7 +872,13 @@ When kbuild executes the following steps are followed (roughly):
Assignments to $(targets) are without $(obj)/ prefix. Assignments to $(targets) are without $(obj)/ prefix.
if_changed may be used in conjunction with custom commands as if_changed may be used in conjunction with custom commands as
defined in 6.7 "Custom kbuild commands". defined in 6.7 "Custom kbuild commands".
Note: It is a typical mistake to forget the FORCE prerequisite. Note: It is a typical mistake to forget the FORCE prerequisite.
Another common pitfall is that whitespace is sometimes
significant; for instance, the below will fail (note the extra space
after the comma):
target: source(s) FORCE
#WRONG!# $(call if_changed, ld/objcopy/gzip)
ld ld
Link target. Often LDFLAGS_$@ is used to set specific options to ld. Link target. Often LDFLAGS_$@ is used to set specific options to ld.
......
...@@ -109,10 +109,9 @@ $(if $(KBUILD_OUTPUT),, \ ...@@ -109,10 +109,9 @@ $(if $(KBUILD_OUTPUT),, \
.PHONY: $(MAKECMDGOALS) .PHONY: $(MAKECMDGOALS)
$(filter-out _all,$(MAKECMDGOALS)) _all: $(filter-out _all,$(MAKECMDGOALS)) _all:
$(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \ $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
KBUILD_SRC=$(CURDIR) KBUILD_VERBOSE=$(KBUILD_VERBOSE) \ KBUILD_SRC=$(CURDIR) \
KBUILD_CHECK=$(KBUILD_CHECK) KBUILD_EXTMOD="$(KBUILD_EXTMOD)" \ KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile $@
-f $(CURDIR)/Makefile $@
# Leave processing to above invocation of make # Leave processing to above invocation of make
skip-makefile := 1 skip-makefile := 1
...@@ -233,7 +232,7 @@ ifeq ($(MAKECMDGOALS),) ...@@ -233,7 +232,7 @@ ifeq ($(MAKECMDGOALS),)
KBUILD_MODULES := 1 KBUILD_MODULES := 1
endif endif
export KBUILD_MODULES KBUILD_BUILTIN KBUILD_VERBOSE export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
# Beautify output # Beautify output
...@@ -309,6 +308,9 @@ cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \ ...@@ -309,6 +308,9 @@ cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh \
# Look for make include files relative to root of kernel src # Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree) MAKEFLAGS += --include-dir=$(srctree)
# We need some generic definitions
include $(srctree)/scripts/Kbuild.include
# For maximum performance (+ possibly random breakage, uncomment # For maximum performance (+ possibly random breakage, uncomment
# the following) # the following)
...@@ -348,7 +350,7 @@ LINUXINCLUDE := -Iinclude \ ...@@ -348,7 +350,7 @@ LINUXINCLUDE := -Iinclude \
CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE) CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
CFLAGS := -Wall -Wstrict-prototypes -Wno-trigraphs \ CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common \ -fno-strict-aliasing -fno-common \
-ffreestanding -ffreestanding
AFLAGS := -D__ASSEMBLY__ AFLAGS := -D__ASSEMBLY__
...@@ -367,11 +369,6 @@ export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE ...@@ -367,11 +369,6 @@ export AFLAGS AFLAGS_KERNEL AFLAGS_MODULE
# even be read-only. # even be read-only.
export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions export MODVERDIR := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/).tmp_versions
# The temporary file to save gcc -MD generated dependencies must not
# contain a comma
comma := ,
depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
# Files to ignore in find ... statements # Files to ignore in find ... statements
RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o RCS_FIND_IGNORE := \( -name SCCS -o -name BitKeeper -o -name .svn -o -name CVS -o -name .pc -o -name .hg \) -prune -o
...@@ -551,6 +548,26 @@ export KBUILD_IMAGE ?= vmlinux ...@@ -551,6 +548,26 @@ export KBUILD_IMAGE ?= vmlinux
# images. Default is /boot, but you can set it to other values # images. Default is /boot, but you can set it to other values
export INSTALL_PATH ?= /boot export INSTALL_PATH ?= /boot
# If CONFIG_LOCALVERSION_AUTO is set, we automatically perform some tests
# and try to determine if the current source tree is a release tree, of any sort,
# or if is a pure development tree.
#
# A 'release tree' is any tree with a git TAG associated
# with it. The primary goal of this is to make it safe for a native
# git/CVS/SVN user to build a release tree (i.e, 2.6.9) and also to
# continue developing against the current Linus tree, without having the Linus
# tree overwrite the 2.6.9 tree when installed.
#
# Currently, only git is supported.
# Other SCMs can edit scripts/setlocalversion and add the appropriate
# checks as needed.
ifdef CONFIG_LOCALVERSION_AUTO
localversion-auto := $(shell $(PERL) $(srctree)/scripts/setlocalversion $(srctree))
LOCALVERSION := $(LOCALVERSION)$(localversion-auto)
endif
# #
# INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory # INSTALL_MOD_PATH specifies a prefix to MODLIB for module directory
# relocations required by build roots. This is not defined in the # relocations required by build roots. This is not defined in the
...@@ -691,8 +708,10 @@ endef ...@@ -691,8 +708,10 @@ endef
# Update vmlinux version before link # Update vmlinux version before link
# Use + in front of this rule to silent warning about make -j1 # Use + in front of this rule to silent warning about make -j1
# First command is ':' to allow us to use + in front of this rule
cmd_ksym_ld = $(cmd_vmlinux__) cmd_ksym_ld = $(cmd_vmlinux__)
define rule_ksym_ld define rule_ksym_ld
:
+$(call cmd,vmlinux_version) +$(call cmd,vmlinux_version)
$(call cmd,vmlinux__) $(call cmd,vmlinux__)
$(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd $(Q)echo 'cmd_$@ := $(cmd_vmlinux__)' > $(@D)/.$(@F).cmd
...@@ -722,6 +741,16 @@ quiet_cmd_kallsyms = KSYM $@ ...@@ -722,6 +741,16 @@ quiet_cmd_kallsyms = KSYM $@
# Needs to visit scripts/ before $(KALLSYMS) can be used. # Needs to visit scripts/ before $(KALLSYMS) can be used.
$(KALLSYMS): scripts ; $(KALLSYMS): scripts ;
# Generate some data for debugging strange kallsyms problems
debug_kallsyms: .tmp_map$(last_kallsyms)
.tmp_map%: .tmp_vmlinux% FORCE
($(OBJDUMP) -h $< | $(AWK) '/^ +[0-9]/{print $$4 " 0 " $$2}'; $(NM) $<) | sort > $@
.tmp_map3: .tmp_map2
.tmp_map2: .tmp_map1
endif # ifdef CONFIG_KALLSYMS endif # ifdef CONFIG_KALLSYMS
# vmlinux image - including updated kernel symbols # vmlinux image - including updated kernel symbols
...@@ -757,7 +786,7 @@ $(vmlinux-dirs): prepare-all scripts ...@@ -757,7 +786,7 @@ $(vmlinux-dirs): prepare-all scripts
prepare2: prepare2:
ifneq ($(KBUILD_SRC),) ifneq ($(KBUILD_SRC),)
@echo ' Using $(srctree) as source for kernel' @echo ' Using $(srctree) as source for kernel'
$(Q)if [ -h $(srctree)/include/asm -o -f $(srctree)/.config ]; then \ $(Q)if [ -f $(srctree)/.config ]; then \
echo " $(srctree) is not clean, please run 'make mrproper'";\ echo " $(srctree) is not clean, please run 'make mrproper'";\
echo " in the '$(srctree)' directory.";\ echo " in the '$(srctree)' directory.";\
/bin/false; \ /bin/false; \
...@@ -769,7 +798,8 @@ endif ...@@ -769,7 +798,8 @@ endif
# prepare1 creates a makefile if using a separate output directory # prepare1 creates a makefile if using a separate output directory
prepare1: prepare2 outputmakefile prepare1: prepare2 outputmakefile
prepare0: prepare1 include/linux/version.h include/asm include/config/MARKER prepare0: prepare1 include/linux/version.h include/asm \
include/config/MARKER
ifneq ($(KBUILD_MODULES),) ifneq ($(KBUILD_MODULES),)
$(Q)rm -rf $(MODVERDIR) $(Q)rm -rf $(MODVERDIR)
$(Q)mkdir -p $(MODVERDIR) $(Q)mkdir -p $(MODVERDIR)
...@@ -875,7 +905,7 @@ modules_install: _modinst_ _modinst_post ...@@ -875,7 +905,7 @@ modules_install: _modinst_ _modinst_post
.PHONY: _modinst_ .PHONY: _modinst_
_modinst_: _modinst_:
@if [ -z "`$(DEPMOD) -V | grep module-init-tools`" ]; then \ @if [ -z "`$(DEPMOD) -V 2>/dev/null | grep module-init-tools`" ]; then \
echo "Warning: you may need to install module-init-tools"; \ echo "Warning: you may need to install module-init-tools"; \
echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\ echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt";\
sleep 1; \ sleep 1; \
...@@ -1159,37 +1189,49 @@ else ...@@ -1159,37 +1189,49 @@ else
__srctree = $(srctree)/ __srctree = $(srctree)/
endif endif
ALLSOURCE_ARCHS := $(ARCH)
define all-sources define all-sources
( find $(__srctree) $(RCS_FIND_IGNORE) \ ( find $(__srctree) $(RCS_FIND_IGNORE) \
\( -name include -o -name arch \) -prune -o \ \( -name include -o -name arch \) -prune -o \
-name '*.[chS]' -print; \ -name '*.[chS]' -print; \
find $(__srctree)arch/$(ARCH) $(RCS_FIND_IGNORE) \ for ARCH in $(ALLSOURCE_ARCHS) ; do \
-name '*.[chS]' -print; \ find $(__srctree)arch/$${ARCH} $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print; \
done ; \
find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \ find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print; \ -name '*.[chS]' -print; \
find $(__srctree)include $(RCS_FIND_IGNORE) \ find $(__srctree)include $(RCS_FIND_IGNORE) \
\( -name config -o -name 'asm-*' \) -prune \ \( -name config -o -name 'asm-*' \) -prune \
-o -name '*.[chS]' -print; \ -o -name '*.[chS]' -print; \
find $(__srctree)include/asm-$(ARCH) $(RCS_FIND_IGNORE) \ for ARCH in $(ALLSOURCE_ARCHS) ; do \
-name '*.[chS]' -print; \ find $(__srctree)include/asm-$${ARCH} $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print; \
done ; \
find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \ find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
-name '*.[chS]' -print ) -name '*.[chS]' -print )
endef endef
quiet_cmd_cscope-file = FILELST cscope.files quiet_cmd_cscope-file = FILELST cscope.files
cmd_cscope-file = $(all-sources) > cscope.files cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files
quiet_cmd_cscope = MAKE cscope.out quiet_cmd_cscope = MAKE cscope.out
cmd_cscope = cscope -k -b -q cmd_cscope = cscope -b
cscope: FORCE cscope: FORCE
$(call cmd,cscope-file) $(call cmd,cscope-file)
$(call cmd,cscope) $(call cmd,cscope)
quiet_cmd_TAGS = MAKE $@ quiet_cmd_TAGS = MAKE $@
cmd_TAGS = $(all-sources) | etags - define cmd_TAGS
rm -f $@; \
ETAGSF=`etags --version | grep -i exuberant >/dev/null && echo "-I __initdata,__exitdata,EXPORT_SYMBOL,EXPORT_SYMBOL_GPL --extra=+f"`; \
$(all-sources) | xargs etags $$ETAGSF -a
endef
TAGS: FORCE
$(call cmd,TAGS)
# Exuberant ctags works better with -I
quiet_cmd_tags = MAKE $@ quiet_cmd_tags = MAKE $@
define cmd_tags define cmd_tags
...@@ -1198,9 +1240,6 @@ define cmd_tags ...@@ -1198,9 +1240,6 @@ define cmd_tags
$(all-sources) | xargs ctags $$CTAGSF -a $(all-sources) | xargs ctags $$CTAGSF -a
endef endef
TAGS: FORCE
$(call cmd,TAGS)
tags: FORCE tags: FORCE
$(call cmd,tags) $(call cmd,tags)
...@@ -1268,82 +1307,11 @@ ifneq ($(cmd_files),) ...@@ -1268,82 +1307,11 @@ ifneq ($(cmd_files),)
include $(cmd_files) include $(cmd_files)
endif endif
# Execute command and generate cmd file
if_changed = $(if $(strip $? \
$(filter-out $(cmd_$(1)),$(cmd_$@))\
$(filter-out $(cmd_$@),$(cmd_$(1)))),\
@set -e; \
$(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) \
$(cmd_$(1)); \
echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
# execute the command and also postprocess generated .d dependencies
# file
if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
$(filter-out $(cmd_$(1)),$(cmd_$@))\
$(filter-out $(cmd_$@),$(cmd_$(1)))),\
$(Q)set -e; \
$(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';) \
$(cmd_$(1)); \
scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
rm -f $(depfile); \
mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
# Usage: $(call if_changed_rule,foo)
# will check if $(cmd_foo) changed, or any of the prequisites changed,
# and if so will execute $(rule_foo)
if_changed_rule = $(if $(strip $? \
$(filter-out $(cmd_$(1)),$(cmd_$(@F)))\
$(filter-out $(cmd_$(@F)),$(cmd_$(1)))),\
$(Q)$(rule_$(1)))
# If quiet is set, only print short version of command
cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
# filechk is used to check if the content of a generated file is updated.
# Sample usage:
# define filechk_sample
# echo $KERNELRELEASE
# endef
# version.h : Makefile
# $(call filechk,sample)
# The rule defined shall write to stdout the content of the new file.
# The existing file will be compared with the new one.
# - If no file exist it is created
# - If the content differ the new file is used
# - If they are equal no change, and no timestamp update
define filechk
@set -e; \
echo ' CHK $@'; \
mkdir -p $(dir $@); \
$(filechk_$(1)) < $< > $@.tmp; \
if [ -r $@ ] && cmp -s $@ $@.tmp; then \
rm -f $@.tmp; \
else \
echo ' UPD $@'; \
mv -f $@.tmp $@; \
fi
endef
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=dir
# Usage:
# $(Q)$(MAKE) $(build)=dir
build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir # Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
# Usage: # Usage:
# $(Q)$(MAKE) $(clean)=dir # $(Q)$(MAKE) $(clean)=dir
clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
# $(call descend,<dir>,<target>)
# Recursively call a sub-make in <dir> with target <target>
# Usage is deprecated, because make does not see this as an invocation of make.
descend =$(Q)$(MAKE) -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj=$(1) $(2)
endif # skip-makefile endif # skip-makefile
FORCE: FORCE:
...@@ -114,7 +114,7 @@ libs-y += arch/m68knommu/lib/ ...@@ -114,7 +114,7 @@ libs-y += arch/m68knommu/lib/
prepare: include/asm-$(ARCH)/asm-offsets.h prepare: include/asm-$(ARCH)/asm-offsets.h
archclean: archclean:
$(call descend arch/$(ARCH)/boot, subdirclean) $(Q)$(MAKE) $(clean)=arch/m68knommu/boot
include/asm-$(ARCH)/asm-offsets.h: arch/$(ARCH)/kernel/asm-offsets.s \ include/asm-$(ARCH)/asm-offsets.h: arch/$(ARCH)/kernel/asm-offsets.s \
include/asm include/linux/version.h \ include/asm include/linux/version.h \
......
...@@ -673,7 +673,7 @@ drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/ ...@@ -673,7 +673,7 @@ drivers-$(CONFIG_OPROFILE) += arch/mips/oprofile/
ifdef CONFIG_LASAT ifdef CONFIG_LASAT
rom.bin rom.sw: vmlinux rom.bin rom.sw: vmlinux
$(call descend,arch/mips/lasat/image,$@) $(Q)$(MAKE) $(build)=arch/mips/lasat/image $@
endif endif
# #
......
...@@ -408,48 +408,6 @@ config BLK_DEV_INITRD ...@@ -408,48 +408,6 @@ config BLK_DEV_INITRD
"real" root file system, etc. See <file:Documentation/initrd.txt> "real" root file system, etc. See <file:Documentation/initrd.txt>
for details. for details.
config INITRAMFS_SOURCE
string "Initramfs source file(s)"
default ""
help
This can be either a single cpio archive with a .cpio suffix or a
space-separated list of directories and files for building the
initramfs image. A cpio archive should contain a filesystem archive
to be used as an initramfs image. Directories should contain a
filesystem layout to be included in the initramfs image. Files
should contain entries according to the format described by the
"usr/gen_init_cpio" program in the kernel tree.
When multiple directories and files are specified then the
initramfs image will be the aggregate of all of them.
See <file:Documentation/early-userspace/README for more details.
If you are not sure, leave it blank.
config INITRAMFS_ROOT_UID
int "User ID to map to 0 (user root)"
depends on INITRAMFS_SOURCE!=""
default "0"
help
This setting is only meaningful if the INITRAMFS_SOURCE is
contains a directory. Setting this user ID (UID) to something
other than "0" will cause all files owned by that UID to be
owned by user root in the initial ramdisk image.
If you are not sure, leave it set to "0".
config INITRAMFS_ROOT_GID
int "Group ID to map to 0 (group root)"
depends on INITRAMFS_SOURCE!=""
default "0"
help
This setting is only meaningful if the INITRAMFS_SOURCE is
contains a directory. Setting this group ID (GID) to something
other than "0" will cause all files owned by that GID to be
owned by group root in the initial ramdisk image.
If you are not sure, leave it set to "0".
#XXX - it makes sense to enable this only for 32-bit subarch's, not for x86_64 #XXX - it makes sense to enable this only for 32-bit subarch's, not for x86_64
#for instance. #for instance.
......
...@@ -6,6 +6,9 @@ ...@@ -6,6 +6,9 @@
#define VMLINUX_SYMBOL(_sym_) _sym_ #define VMLINUX_SYMBOL(_sym_) _sym_
#endif #endif
/* Align . to a 8 byte boundary equals to maximum function alignment. */
#define ALIGN_FUNCTION() . = ALIGN(8)
#define RODATA \ #define RODATA \
.rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \ .rodata : AT(ADDR(.rodata) - LOAD_OFFSET) { \
*(.rodata) *(.rodata.*) \ *(.rodata) *(.rodata.*) \
...@@ -79,12 +82,18 @@ ...@@ -79,12 +82,18 @@
VMLINUX_SYMBOL(__security_initcall_end) = .; \ VMLINUX_SYMBOL(__security_initcall_end) = .; \
} }
/* sched.text is aling to function alignment to secure we have same
* address even at second ld pass when generating System.map */
#define SCHED_TEXT \ #define SCHED_TEXT \
ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__sched_text_start) = .; \ VMLINUX_SYMBOL(__sched_text_start) = .; \
*(.sched.text) \ *(.sched.text) \
VMLINUX_SYMBOL(__sched_text_end) = .; VMLINUX_SYMBOL(__sched_text_end) = .;
/* spinlock.text is aling to function alignment to secure we have same
* address even at second ld pass when generating System.map */
#define LOCK_TEXT \ #define LOCK_TEXT \
ALIGN_FUNCTION(); \
VMLINUX_SYMBOL(__lock_text_start) = .; \ VMLINUX_SYMBOL(__lock_text_start) = .; \
*(.spinlock.text) \ *(.spinlock.text) \
VMLINUX_SYMBOL(__lock_text_end) = .; VMLINUX_SYMBOL(__lock_text_end) = .;
...@@ -77,6 +77,22 @@ config LOCALVERSION ...@@ -77,6 +77,22 @@ config LOCALVERSION
object and source tree, in that order. Your total string can object and source tree, in that order. Your total string can
be a maximum of 64 characters. be a maximum of 64 characters.
config LOCALVERSION_AUTO
bool "Automatically append version information to the version string"
default y
help
This will try to automatically determine if the current tree is a
release tree by looking for git tags that
belong to the current top of tree revision.
A string of the format -gxxxxxxxx will be added to the localversion
if a git based tree is found. The string generated by this will be
appended after any matching localversion* files, and after the value
set in CONFIG_LOCALVERSION
Note: This requires Perl, and a git repository, but not necessarily
the git or cogito tools to be installed.
config SWAP config SWAP
bool "Support for paging of anonymous memory (swap)" bool "Support for paging of anonymous memory (swap)"
depends on MMU depends on MMU
...@@ -238,6 +254,8 @@ config CPUSETS ...@@ -238,6 +254,8 @@ config CPUSETS
Say N if unsure. Say N if unsure.
source "usr/Kconfig"
menuconfig EMBEDDED menuconfig EMBEDDED
bool "Configure standard kernel features (for small systems)" bool "Configure standard kernel features (for small systems)"
help help
...@@ -260,8 +278,8 @@ config KALLSYMS_ALL ...@@ -260,8 +278,8 @@ config KALLSYMS_ALL
help help
Normally kallsyms only contains the symbols of functions, for nicer Normally kallsyms only contains the symbols of functions, for nicer
OOPS messages. Some debuggers can use kallsyms for other OOPS messages. Some debuggers can use kallsyms for other
symbols too: say Y here to include all symbols, and you symbols too: say Y here to include all symbols, if you need them
don't care about adding 300k to the size of your kernel. and you don't care about adding 300k to the size of your kernel.
Say N. Say N.
......
...@@ -25,4 +25,5 @@ $(obj)/version.o: include/linux/compile.h ...@@ -25,4 +25,5 @@ $(obj)/version.o: include/linux/compile.h
include/linux/compile.h: FORCE include/linux/compile.h: FORCE
@echo ' CHK $@' @echo ' CHK $@'
@$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ "$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CC) $(CFLAGS)" $(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkcompile_h $@ \
"$(UTS_MACHINE)" "$(CONFIG_SMP)" "$(CONFIG_PREEMPT)" "$(CC) $(CFLAGS)"
####
# kbuild: Generic definitions
# Convinient variables
comma := ,
empty :=
space := $(empty) $(empty)
###
# The temporary file to save gcc -MD generated dependencies must not
# contain a comma
depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
###
# filechk is used to check if the content of a generated file is updated.
# Sample usage:
# define filechk_sample
# echo $KERNELRELEASE
# endef
# version.h : Makefile
# $(call filechk,sample)
# The rule defined shall write to stdout the content of the new file.
# The existing file will be compared with the new one.
# - If no file exist it is created
# - If the content differ the new file is used
# - If they are equal no change, and no timestamp update
# - stdin is piped in from the first prerequisite ($<) so one has
# to specify a valid file as first prerequisite (often the kbuild file)
define filechk
$(Q)set -e; \
echo ' CHK $@'; \
mkdir -p $(dir $@); \
$(filechk_$(1)) < $< > $@.tmp; \
if [ -r $@ ] && cmp -s $@ $@.tmp; then \
rm -f $@.tmp; \
else \
echo ' UPD $@'; \
mv -f $@.tmp $@; \
fi
endef
###
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
# Usage:
# $(Q)$(MAKE) $(build)=dir
build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
# If quiet is set, only print short version of command
cmd = @$(if $($(quiet)cmd_$(1)),\
echo ' $(subst ','\'',$($(quiet)cmd_$(1)))' &&) $(cmd_$(1))
###
# if_changed - execute command if any prerequisite is newer than
# target, or command line has changed
# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies
# including used config symbols
# if_changed_rule - as if_changed but execute rule instead
# See Documentation/kbuild/makefiles.txt for more info
ifneq ($(KBUILD_NOCMDDEP),1)
# Check if both arguments has same arguments. Result in empty string if equal
# User may override this check using make KBUILD_NOCMDDEP=1
arg-check = $(strip $(filter-out $(1), $(2)) $(filter-out $(2), $(1)) )
endif
# echo command. Short version is $(quiet) equals quiet, otherwise full command
echo-cmd = $(if $($(quiet)cmd_$(1)), \
echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';)
# function to only execute the passed command if necessary
# >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file
# note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars
#
if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
@set -e; \
$(echo-cmd) \
$(cmd_$(1)); \
echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
# execute the command and also postprocess generated .d dependencies
# file
if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
@set -e; \
$(echo-cmd) \
$(cmd_$(1)); \
scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
rm -f $(depfile); \
mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
# Usage: $(call if_changed_rule,foo)
# will check if $(cmd_foo) changed, or any of the prequisites changed,
# and if so will execute $(rule_foo)
if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
@set -e; \
$(rule_$(1)))
...@@ -10,8 +10,11 @@ __build: ...@@ -10,8 +10,11 @@ __build:
# Read .config if it exist, otherwise ignore # Read .config if it exist, otherwise ignore
-include .config -include .config
include $(if $(wildcard $(obj)/Kbuild), $(obj)/Kbuild, $(obj)/Makefile) # The filename Kbuild has precedence over Makefile
kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile)
include scripts/Kbuild.include
include scripts/Makefile.lib include scripts/Makefile.lib
ifdef host-progs ifdef host-progs
...@@ -169,7 +172,7 @@ cmd_modversions = \ ...@@ -169,7 +172,7 @@ cmd_modversions = \
-T $(@D)/.tmp_$(@F:.o=.ver); \ -T $(@D)/.tmp_$(@F:.o=.ver); \
rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \ rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \
else \ else \
mv $(@D)/.tmp_$(@F) $@; \ mv -f $(@D)/.tmp_$(@F) $@; \
fi; fi;
endif endif
......
...@@ -7,7 +7,14 @@ src := $(obj) ...@@ -7,7 +7,14 @@ src := $(obj)
.PHONY: __clean .PHONY: __clean
__clean: __clean:
include $(if $(wildcard $(obj)/Kbuild), $(obj)/Kbuild, $(obj)/Makefile) # Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
# The filename Kbuild has precedence over Makefile
kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
include $(if $(wildcard $(kbuild-dir)/Kbuild), $(kbuild-dir)/Kbuild, $(kbuild-dir)/Makefile)
# Figure out what we need to build from the various variables # Figure out what we need to build from the various variables
# ========================================================================== # ==========================================================================
...@@ -87,8 +94,3 @@ $(subdir-ymn): ...@@ -87,8 +94,3 @@ $(subdir-ymn):
# If quiet is set, only print short version of command # If quiet is set, only print short version of command
cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1)) cmd = @$(if $($(quiet)cmd_$(1)),echo ' $($(quiet)cmd_$(1))' &&) $(cmd_$(1))
# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
...@@ -98,7 +98,8 @@ hostcxx_flags = -Wp,-MD,$(depfile) $(__hostcxx_flags) ...@@ -98,7 +98,8 @@ hostcxx_flags = -Wp,-MD,$(depfile) $(__hostcxx_flags)
# Create executable from a single .c file # Create executable from a single .c file
# host-csingle -> Executable # host-csingle -> Executable
quiet_cmd_host-csingle = HOSTCC $@ quiet_cmd_host-csingle = HOSTCC $@
cmd_host-csingle = $(HOSTCC) $(hostc_flags) $(HOST_LOADLIBES) -o $@ $< cmd_host-csingle = $(HOSTCC) $(hostc_flags) -o $@ $< \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
$(host-csingle): %: %.c FORCE $(host-csingle): %: %.c FORCE
$(call if_changed_dep,host-csingle) $(call if_changed_dep,host-csingle)
......
# ===========================================================================
# kbuild: Generic definitions
# ===========================================================================
# Standard vars
comma := ,
empty :=
space := $(empty) $(empty)
# Backward compatibility - to be removed... # Backward compatibility - to be removed...
extra-y += $(EXTRA_TARGETS) extra-y += $(EXTRA_TARGETS)
# Figure out what we need to build from the various variables # Figure out what we need to build from the various variables
...@@ -84,10 +74,6 @@ multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m)) ...@@ -84,10 +74,6 @@ multi-objs-m := $(addprefix $(obj)/,$(multi-objs-m))
subdir-ym := $(addprefix $(obj)/,$(subdir-ym)) subdir-ym := $(addprefix $(obj)/,$(subdir-ym))
obj-dirs := $(addprefix $(obj)/,$(obj-dirs)) obj-dirs := $(addprefix $(obj)/,$(obj-dirs))
# The temporary file to save gcc -MD generated dependencies must not
# contain a comma
depfile = $(subst $(comma),_,$(@D)/.$(@F).d)
# These flags are needed for modversions and compiling, so we define them here # These flags are needed for modversions and compiling, so we define them here
# already # already
# $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will # $(modname_flags) #defines KBUILD_MODNAME as the name of the module it will
...@@ -179,89 +165,4 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@ ...@@ -179,89 +165,4 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
quiet_cmd_gzip = GZIP $@ quiet_cmd_gzip = GZIP $@
cmd_gzip = gzip -f -9 < $< > $@ cmd_gzip = gzip -f -9 < $< > $@
# ===========================================================================
# Generic stuff
# ===========================================================================
ifneq ($(KBUILD_NOCMDDEP),1)
# Check if both arguments has same arguments. Result in empty string if equal
# User may override this check using make KBUILD_NOCMDDEP=1
arg-check = $(strip $(filter-out $(1), $(2)) $(filter-out $(2), $(1)) )
endif
# echo command. Short version is $(quiet) equals quiet, otherwise full command
echo-cmd = $(if $($(quiet)cmd_$(1)), \
echo ' $(subst ','\'',$($(quiet)cmd_$(1)))';)
# function to only execute the passed command if necessary
# >'< substitution is for echo to work, >$< substitution to preserve $ when reloading .cmd file
# note: when using inline perl scripts [perl -e '...$$t=1;...'] in $(cmd_xxx) double $$ your perl vars
#
if_changed = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
@set -e; \
$(echo-cmd) \
$(cmd_$(1)); \
echo 'cmd_$@ := $(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).cmd)
# execute the command and also postprocess generated .d dependencies
# file
if_changed_dep = $(if $(strip $? $(filter-out FORCE $(wildcard $^),$^)\
$(call arg-check, $(cmd_$(1)), $(cmd_$@)) ), \
@set -e; \
$(echo-cmd) \
$(cmd_$(1)); \
scripts/basic/fixdep $(depfile) $@ '$(subst $$,$$$$,$(subst ','\'',$(cmd_$(1))))' > $(@D)/.$(@F).tmp; \
rm -f $(depfile); \
mv -f $(@D)/.$(@F).tmp $(@D)/.$(@F).cmd)
# Usage: $(call if_changed_rule,foo)
# will check if $(cmd_foo) changed, or any of the prequisites changed,
# and if so will execute $(rule_foo)
if_changed_rule = $(if $(strip $? $(call arg-check, $(cmd_$(1)), $(cmd_$@)) ),\
@set -e; \
$(rule_$(1)))
# If quiet is set, only print short version of command
cmd = @$(if $($(quiet)cmd_$(1)),echo ' $(subst ','\'',$($(quiet)cmd_$(1)))' &&) $(cmd_$(1))
# $(call descend,<dir>,<target>)
# Recursively call a sub-make in <dir> with target <target>
# Usage is deprecated, because make do not see this as an invocation of make.
descend =$(Q)$(MAKE) -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj=$(1) $(2)
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
# Usage:
# $(Q)$(MAKE) $(build)=dir
build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
# filechk is used to check if the content of a generated file is updated.
# Sample usage:
# define filechk_sample
# echo $KERNELRELEASE
# endef
# version.h : Makefile
# $(call filechk,sample)
# The rule defined shall write to stdout the content of the new file.
# The existing file will be compared with the new one.
# - If no file exist it is created
# - If the content differ the new file is used
# - If they are equal no change, and no timestamp update
define filechk
$(Q)set -e; \
echo ' CHK $@'; \
mkdir -p $(dir $@); \
$(filechk_$(1)) $(2) > $@.tmp; \
if [ -r $@ ] && cmp -s $@ $@.tmp; then \
rm -f $@.tmp; \
else \
echo ' UPD $@'; \
mv -f $@.tmp $@; \
fi
endef
...@@ -5,7 +5,7 @@ ...@@ -5,7 +5,7 @@
.PHONY: __modinst .PHONY: __modinst
__modinst: __modinst:
include scripts/Makefile.lib include scripts/Kbuild.include
# #
......
...@@ -36,6 +36,7 @@ ...@@ -36,6 +36,7 @@
_modpost: __modpost _modpost: __modpost
include .config include .config
include scripts/Kbuild.include
include scripts/Makefile.lib include scripts/Makefile.lib
symverfile := $(objtree)/Module.symvers symverfile := $(objtree)/Module.symvers
......
...@@ -33,7 +33,7 @@ void usage(char *argv0) ...@@ -33,7 +33,7 @@ void usage(char *argv0)
int getunicode(char **p0) int getunicode(char **p0)
{ {
unsigned char *p = *p0; char *p = *p0;
while (*p == ' ' || *p == '\t') while (*p == ' ' || *p == '\t')
p++; p++;
......
...@@ -207,9 +207,9 @@ symbol_valid(struct sym_entry *s) ...@@ -207,9 +207,9 @@ symbol_valid(struct sym_entry *s)
* move then they may get dropped in pass 2, which breaks the * move then they may get dropped in pass 2, which breaks the
* kallsyms rules. * kallsyms rules.
*/ */
if ((s->addr == _etext && strcmp(s->sym + offset, "_etext")) || if ((s->addr == _etext && strcmp((char*)s->sym + offset, "_etext")) ||
(s->addr == _einittext && strcmp(s->sym + offset, "_einittext")) || (s->addr == _einittext && strcmp((char*)s->sym + offset, "_einittext")) ||
(s->addr == _eextratext && strcmp(s->sym + offset, "_eextratext"))) (s->addr == _eextratext && strcmp((char*)s->sym + offset, "_eextratext")))
return 0; return 0;
} }
......
...@@ -59,7 +59,7 @@ void menu_add_entry(struct symbol *sym); ...@@ -59,7 +59,7 @@ void menu_add_entry(struct symbol *sym);
void menu_end_entry(void); void menu_end_entry(void);
void menu_add_dep(struct expr *dep); void menu_add_dep(struct expr *dep);
struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep); struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep);
void menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep); struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep);
void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep); void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep);
void menu_add_symbol(enum prop_type type, struct symbol *sym, struct expr *dep); void menu_add_symbol(enum prop_type type, struct symbol *sym, struct expr *dep);
void menu_finalize(struct menu *parent); void menu_finalize(struct menu *parent);
......
...@@ -136,9 +136,9 @@ struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *e ...@@ -136,9 +136,9 @@ struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *e
return prop; return prop;
} }
void menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep) struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep)
{ {
menu_add_prop(type, prompt, NULL, dep); return menu_add_prop(type, prompt, NULL, dep);
} }
void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep) void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep)
......
...@@ -1531,7 +1531,7 @@ yyreduce: ...@@ -1531,7 +1531,7 @@ yyreduce:
{ {
menu_add_entry(NULL); menu_add_entry(NULL);
menu_add_prop(P_MENU, yyvsp[-1].string, NULL, NULL); menu_add_prompt(P_MENU, yyvsp[-1].string, NULL);
printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno()); printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno());
;} ;}
break; break;
...@@ -1586,7 +1586,7 @@ yyreduce: ...@@ -1586,7 +1586,7 @@ yyreduce:
{ {
menu_add_entry(NULL); menu_add_entry(NULL);
menu_add_prop(P_COMMENT, yyvsp[-1].string, NULL, NULL); menu_add_prompt(P_COMMENT, yyvsp[-1].string, NULL);
printd(DEBUG_PARSE, "%s:%d:comment\n", zconf_curname(), zconf_lineno()); printd(DEBUG_PARSE, "%s:%d:comment\n", zconf_curname(), zconf_lineno());
;} ;}
break; break;
...@@ -1640,7 +1640,7 @@ yyreduce: ...@@ -1640,7 +1640,7 @@ yyreduce:
case 86: case 86:
{ {
menu_add_prop(P_PROMPT, yyvsp[-1].string, NULL, yyvsp[0].expr); menu_add_prompt(P_PROMPT, yyvsp[-1].string, yyvsp[0].expr);
;} ;}
break; break;
...@@ -1925,7 +1925,7 @@ void conf_parse(const char *name) ...@@ -1925,7 +1925,7 @@ void conf_parse(const char *name)
sym_init(); sym_init();
menu_init(); menu_init();
modules_sym = sym_lookup("MODULES", 0); modules_sym = sym_lookup("MODULES", 0);
rootmenu.prompt = menu_add_prop(P_MENU, "Linux Kernel Configuration", NULL, NULL); rootmenu.prompt = menu_add_prompt(P_MENU, "Linux Kernel Configuration", NULL);
//zconfdebug = 1; //zconfdebug = 1;
zconfparse(); zconfparse();
......
...@@ -342,7 +342,7 @@ if_block: ...@@ -342,7 +342,7 @@ if_block:
menu: T_MENU prompt T_EOL menu: T_MENU prompt T_EOL
{ {
menu_add_entry(NULL); menu_add_entry(NULL);
menu_add_prop(P_MENU, $2, NULL, NULL); menu_add_prompt(P_MENU, $2, NULL);
printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno()); printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno());
}; };
...@@ -392,7 +392,7 @@ source_stmt: source ...@@ -392,7 +392,7 @@ source_stmt: source
comment: T_COMMENT prompt T_EOL comment: T_COMMENT prompt T_EOL
{ {
menu_add_entry(NULL); menu_add_entry(NULL);
menu_add_prop(P_COMMENT, $2, NULL, NULL); menu_add_prompt(P_COMMENT, $2, NULL);
printd(DEBUG_PARSE, "%s:%d:comment\n", zconf_curname(), zconf_lineno()); printd(DEBUG_PARSE, "%s:%d:comment\n", zconf_curname(), zconf_lineno());
}; };
...@@ -443,7 +443,7 @@ prompt_stmt_opt: ...@@ -443,7 +443,7 @@ prompt_stmt_opt:
/* empty */ /* empty */
| prompt if_expr | prompt if_expr
{ {
menu_add_prop(P_PROMPT, $1, NULL, $2); menu_add_prompt(P_PROMPT, $1, $2);
}; };
prompt: T_WORD prompt: T_WORD
...@@ -487,7 +487,7 @@ void conf_parse(const char *name) ...@@ -487,7 +487,7 @@ void conf_parse(const char *name)
sym_init(); sym_init();
menu_init(); menu_init();
modules_sym = sym_lookup("MODULES", 0); modules_sym = sym_lookup("MODULES", 0);
rootmenu.prompt = menu_add_prop(P_MENU, "Linux Kernel Configuration", NULL, NULL); rootmenu.prompt = menu_add_prompt(P_MENU, "Linux Kernel Configuration", NULL);
//zconfdebug = 1; //zconfdebug = 1;
zconfparse(); zconfparse();
......
...@@ -1665,11 +1665,17 @@ sub xml_escape($) { ...@@ -1665,11 +1665,17 @@ sub xml_escape($) {
} }
sub process_file($) { sub process_file($) {
my ($file) = "$ENV{'SRCTREE'}@_"; my $file;
my $identifier; my $identifier;
my $func; my $func;
my $initial_section_counter = $section_counter; my $initial_section_counter = $section_counter;
if (defined($ENV{'SRCTREE'})) {
$file = "$ENV{'SRCTREE'}" . "/" . "@_";
}
else {
$file = "@_";
}
if (defined($source_map{$file})) { if (defined($source_map{$file})) {
$file = $source_map{$file}; $file = $source_map{$file};
} }
......
...@@ -163,7 +163,7 @@ int dialog_menu (const char *title, const char *prompt, int height, int width, ...@@ -163,7 +163,7 @@ int dialog_menu (const char *title, const char *prompt, int height, int width,
int dialog_checklist (const char *title, const char *prompt, int height, int dialog_checklist (const char *title, const char *prompt, int height,
int width, int list_height, int item_no, int width, int list_height, int item_no,
const char * const * items, int flag); const char * const * items, int flag);
extern unsigned char dialog_input_result[]; extern char dialog_input_result[];
int dialog_inputbox (const char *title, const char *prompt, int height, int dialog_inputbox (const char *title, const char *prompt, int height,
int width, const char *init); int width, const char *init);
......
...@@ -21,7 +21,7 @@ ...@@ -21,7 +21,7 @@
#include "dialog.h" #include "dialog.h"
unsigned char dialog_input_result[MAX_LEN + 1]; char dialog_input_result[MAX_LEN + 1];
/* /*
* Print the termination buttons * Print the termination buttons
...@@ -48,7 +48,7 @@ dialog_inputbox (const char *title, const char *prompt, int height, int width, ...@@ -48,7 +48,7 @@ dialog_inputbox (const char *title, const char *prompt, int height, int width,
{ {
int i, x, y, box_y, box_x, box_width; int i, x, y, box_y, box_x, box_width;
int input_x = 0, scroll = 0, key = 0, button = -1; int input_x = 0, scroll = 0, key = 0, button = -1;
unsigned char *instr = dialog_input_result; char *instr = dialog_input_result;
WINDOW *dialog; WINDOW *dialog;
/* center dialog box on screen */ /* center dialog box on screen */
......
TARGET=$1 TARGET=$1
ARCH=$2 ARCH=$2
SMP=$3 SMP=$3
CC=$4 PREEMPT=$4
CC=$5
# If compile.h exists already and we don't own autoconf.h # If compile.h exists already and we don't own autoconf.h
# (i.e. we're not the same user who did make *config), don't # (i.e. we're not the same user who did make *config), don't
...@@ -26,8 +27,10 @@ fi ...@@ -26,8 +27,10 @@ fi
UTS_VERSION="#$VERSION" UTS_VERSION="#$VERSION"
if [ -n "$SMP" ] ; then UTS_VERSION="$UTS_VERSION SMP"; fi CONFIG_FLAGS=""
UTS_VERSION="$UTS_VERSION `LC_ALL=C LANG=C date`" if [ -n "$SMP" ] ; then CONFIG_FLAGS="SMP"; fi
if [ -n "$PREEMPT" ] ; then CONFIG_FLAGS="$CONFIG_FLAGS PREEMPT"; fi
UTS_VERSION="$UTS_VERSION $CONFIG_FLAGS `LC_ALL=C LANG=C date`"
# Truncate to maximum length # Truncate to maximum length
...@@ -37,7 +40,8 @@ UTS_TRUNCATE="sed -e s/\(.\{1,$UTS_LEN\}\).*/\1/" ...@@ -37,7 +40,8 @@ UTS_TRUNCATE="sed -e s/\(.\{1,$UTS_LEN\}\).*/\1/"
# Generate a temporary compile.h # Generate a temporary compile.h
( echo /\* This file is auto generated, version $VERSION \*/ ( echo /\* This file is auto generated, version $VERSION \*/
if [ -n "$CONFIG_FLAGS" ] ; then echo "/* $CONFIG_FLAGS */"; fi
echo \#define UTS_MACHINE \"$ARCH\" echo \#define UTS_MACHINE \"$ARCH\"
echo \#define UTS_VERSION \"`echo $UTS_VERSION | $UTS_TRUNCATE`\" echo \#define UTS_VERSION \"`echo $UTS_VERSION | $UTS_TRUNCATE`\"
......
...@@ -252,9 +252,9 @@ static int parse_comment(const char *file, unsigned long len) ...@@ -252,9 +252,9 @@ static int parse_comment(const char *file, unsigned long len)
} }
/* FIXME: Handle .s files differently (eg. # starts comments) --RR */ /* FIXME: Handle .s files differently (eg. # starts comments) --RR */
static int parse_file(const signed char *fname, struct md4_ctx *md) static int parse_file(const char *fname, struct md4_ctx *md)
{ {
signed char *file; char *file;
unsigned long i, len; unsigned long i, len;
file = grab_file(fname, &len); file = grab_file(fname, &len);
...@@ -332,7 +332,7 @@ static int parse_source_files(const char *objfile, struct md4_ctx *md) ...@@ -332,7 +332,7 @@ static int parse_source_files(const char *objfile, struct md4_ctx *md)
Sum all files in the same dir or subdirs. Sum all files in the same dir or subdirs.
*/ */
while ((line = get_next_line(&pos, file, flen)) != NULL) { while ((line = get_next_line(&pos, file, flen)) != NULL) {
signed char* p = line; char* p = line;
if (strncmp(line, "deps_", sizeof("deps_")-1) == 0) { if (strncmp(line, "deps_", sizeof("deps_")-1) == 0) {
check_files = 1; check_files = 1;
continue; continue;
...@@ -458,7 +458,7 @@ static void write_version(const char *filename, const char *sum, ...@@ -458,7 +458,7 @@ static void write_version(const char *filename, const char *sum,
close(fd); close(fd);
} }
static int strip_rcs_crap(signed char *version) static int strip_rcs_crap(char *version)
{ {
unsigned int len, full_len; unsigned int len, full_len;
......
...@@ -59,7 +59,7 @@ $(objtree)/binkernel.spec: $(MKSPEC) $(srctree)/Makefile ...@@ -59,7 +59,7 @@ $(objtree)/binkernel.spec: $(MKSPEC) $(srctree)/Makefile
$(CONFIG_SHELL) $(MKSPEC) prebuilt > $@ $(CONFIG_SHELL) $(MKSPEC) prebuilt > $@
binrpm-pkg: $(objtree)/binkernel.spec binrpm-pkg: $(objtree)/binkernel.spec
$(MAKE) $(MAKE) KBUILD_SRC=
set -e; \ set -e; \
$(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version $(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version
set -e; \ set -e; \
...@@ -74,16 +74,30 @@ clean-files += $(objtree)/binkernel.spec ...@@ -74,16 +74,30 @@ clean-files += $(objtree)/binkernel.spec
# #
.PHONY: deb-pkg .PHONY: deb-pkg
deb-pkg: deb-pkg:
$(MAKE) $(MAKE) KBUILD_SRC=
$(CONFIG_SHELL) $(srctree)/scripts/package/builddeb $(CONFIG_SHELL) $(srctree)/scripts/package/builddeb
clean-dirs += $(objtree)/debian/ clean-dirs += $(objtree)/debian/
# tarball targets
# ---------------------------------------------------------------------------
.PHONY: tar%pkg
tar%pkg:
$(MAKE)
$(CONFIG_SHELL) $(srctree)/scripts/package/buildtar $@
clean-dirs += $(objtree)/tar-install/
# Help text displayed when executing 'make help' # Help text displayed when executing 'make help'
# --------------------------------------------------------------------------- # ---------------------------------------------------------------------------
help: help:
@echo ' rpm-pkg - Build the kernel as an RPM package' @echo ' rpm-pkg - Build the kernel as an RPM package'
@echo ' binrpm-pkg - Build an rpm package containing the compiled kernel & modules' @echo ' binrpm-pkg - Build an rpm package containing the compiled kernel'
@echo ' deb-pkg - Build the kernel as an deb package' @echo ' and modules'
@echo ' deb-pkg - Build the kernel as an deb package'
@echo ' tar-pkg - Build the kernel as an uncompressed tarball'
@echo ' targz-pkg - Build the kernel as a gzip compressed tarball'
@echo ' tarbz2-pkg - Build the kernel as a bzip2 compressed tarball'
...@@ -14,18 +14,38 @@ set -e ...@@ -14,18 +14,38 @@ set -e
# Some variables and settings used throughout the script # Some variables and settings used throughout the script
version=$KERNELRELEASE version=$KERNELRELEASE
tmpdir="$objtree/debian/tmp" tmpdir="$objtree/debian/tmp"
packagename=linux-$version
if [ "$ARCH" == "um" ] ; then
packagename=user-mode-linux-$version
fi
# Setup the directory structure # Setup the directory structure
rm -rf "$tmpdir" rm -rf "$tmpdir"
mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot" mkdir -p "$tmpdir/DEBIAN" "$tmpdir/lib" "$tmpdir/boot"
if [ "$ARCH" == "um" ] ; then
mkdir -p "$tmpdir/usr/lib/uml/modules/$version" "$tmpdir/usr/share/doc/$packagename" "$tmpdir/usr/bin"
fi
# Build and install the kernel # Build and install the kernel
cp System.map "$tmpdir/boot/System.map-$version" if [ "$ARCH" == "um" ] ; then
cp .config "$tmpdir/boot/config-$version" $MAKE linux
cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version" cp System.map "$tmpdir/usr/lib/uml/modules/$version/System.map"
cp .config "$tmpdir/usr/share/doc/$packagename/config"
gzip "$tmpdir/usr/share/doc/$packagename/config"
cp $KBUILD_IMAGE "$tmpdir/usr/bin/linux-$version"
else
cp System.map "$tmpdir/boot/System.map-$version"
cp .config "$tmpdir/boot/config-$version"
cp $KBUILD_IMAGE "$tmpdir/boot/vmlinuz-$version"
fi
if grep -q '^CONFIG_MODULES=y' .config ; then if grep -q '^CONFIG_MODULES=y' .config ; then
INSTALL_MOD_PATH="$tmpdir" make modules_install INSTALL_MOD_PATH="$tmpdir" make KBUILD_SRC= modules_install
if [ "$ARCH" == "um" ] ; then
mv "$tmpdir/lib/modules/$version"/* "$tmpdir/usr/lib/uml/modules/$version/"
rmdir "$tmpdir/lib/modules/$version"
fi
fi fi
# Install the maintainer scripts # Install the maintainer scripts
...@@ -53,6 +73,8 @@ linux ($version) unstable; urgency=low ...@@ -53,6 +73,8 @@ linux ($version) unstable; urgency=low
EOF EOF
# Generate a control file # Generate a control file
if [ "$ARCH" == "um" ]; then
cat <<EOF > debian/control cat <<EOF > debian/control
Source: linux Source: linux
Section: base Section: base
...@@ -60,12 +82,34 @@ Priority: optional ...@@ -60,12 +82,34 @@ Priority: optional
Maintainer: $name Maintainer: $name
Standards-Version: 3.6.1 Standards-Version: 3.6.1
Package: linux-$version Package: $packagename
Architecture: any
Description: User Mode Linux kernel, version $version
User-mode Linux is a port of the Linux kernel to its own system call
interface. It provides a kind of virtual machine, which runs Linux
as a user process under another Linux kernel. This is useful for
kernel development, sandboxes, jails, experimentation, and
many other things.
.
This package contains the Linux kernel, modules and corresponding other
files version $version
EOF
else
cat <<EOF > debian/control
Source: linux
Section: base
Priority: optional
Maintainer: $name
Standards-Version: 3.6.1
Package: $packagename
Architecture: any Architecture: any
Description: Linux kernel, version $version Description: Linux kernel, version $version
This package contains the Linux kernel, modules and corresponding other This package contains the Linux kernel, modules and corresponding other
files version $version. files version $version
EOF EOF
fi
# Fix some ownership and permissions # Fix some ownership and permissions
chown -R root:root "$tmpdir" chown -R root:root "$tmpdir"
......
#!/bin/sh
#
# buildtar 0.0.3
#
# (C) 2004-2005 by Jan-Benedict Glaw <jbglaw@lug-owl.de>
#
# This script is used to compile a tarball from the currently
# prepared kernel. Based upon the builddeb script from
# Wichert Akkerman <wichert@wiggy.net>.
#
set -e
#
# Some variables and settings used throughout the script
#
version="${VERSION}.${PATCHLEVEL}.${SUBLEVEL}${EXTRAVERSION}${EXTRANAME}"
tmpdir="${objtree}/tar-install"
tarball="${objtree}/linux-${version}.tar"
#
# Figure out how to compress, if requested at all
#
case "${1}" in
tar-pkg)
compress="cat"
file_ext=""
;;
targz-pkg)
compress="gzip -c9"
file_ext=".gz"
;;
tarbz2-pkg)
compress="bzip2 -c9"
file_ext=".bz2"
;;
*)
echo "Unknown tarball target \"${1}\" requested, please add it to ${0}." >&2
exit 1
;;
esac
#
# Clean-up and re-create the temporary directory
#
rm -rf -- "${tmpdir}"
mkdir -p -- "${tmpdir}/boot"
#
# Try to install modules
#
if ! make INSTALL_MOD_PATH="${tmpdir}" modules_install; then
echo "" >&2
echo "Ignoring error at module_install time, since that could be" >&2
echo "a result of missing local modutils/module-init-tools," >&2
echo "or you just didn't compile in module support at all..." >&2
echo "" >&2
fi
#
# Install basic kernel files
#
cp -v -- System.map "${tmpdir}/boot/System.map-${version}"
cp -v -- .config "${tmpdir}/boot/config-${version}"
cp -v -- vmlinux "${tmpdir}/boot/vmlinux-${version}"
#
# Install arch-specific kernel image(s)
#
case "${ARCH}" in
i386)
[ -f arch/i386/boot/bzImage ] && cp -v -- arch/i386/boot/bzImage "${tmpdir}/boot/vmlinuz-${version}"
;;
alpha)
[ -f arch/alpha/boot/vmlinux.gz ] && cp -v -- arch/alpha/boot/vmlinux.gz "${tmpdir}/boot/vmlinuz-${version}"
;;
vax)
[ -f vmlinux.SYS ] && cp -v -- vmlinux.SYS "${tmpdir}/boot/vmlinux-${version}.SYS"
[ -f vmlinux.dsk ] && cp -v -- vmlinux.dsk "${tmpdir}/boot/vmlinux-${version}.dsk"
;;
*)
[ -f "${KBUILD_IMAGE}" ] && cp -v -- "${KBUILD_IMAGE}" "${tmpdir}/boot/vmlinux-kbuild-${version}"
echo "" >&2
echo '** ** ** WARNING ** ** **' >&2
echo "" >&2
echo "Your architecture did not define any architecture-dependant files" >&2
echo "to be placed into the tarball. Please add those to ${0} ..." >&2
echo "" >&2
sleep 5
;;
esac
#
# Create the tarball
#
(
cd "${tmpdir}"
tar cf - . | ${compress} > "${tarball}${file_ext}"
)
echo "Tarball successfully created in ${tarball}${file_ext}"
exit 0
...@@ -62,10 +62,19 @@ echo "" ...@@ -62,10 +62,19 @@ echo ""
fi fi
echo "%install" echo "%install"
echo "%ifarch ia64"
echo 'mkdir -p $RPM_BUILD_ROOT/boot/efi $RPM_BUILD_ROOT/lib $RPM_BUILD_ROOT/lib/modules'
echo "%else"
echo 'mkdir -p $RPM_BUILD_ROOT/boot $RPM_BUILD_ROOT/lib $RPM_BUILD_ROOT/lib/modules' echo 'mkdir -p $RPM_BUILD_ROOT/boot $RPM_BUILD_ROOT/lib $RPM_BUILD_ROOT/lib/modules'
echo "%endif"
echo 'INSTALL_MOD_PATH=$RPM_BUILD_ROOT make %{_smp_mflags} modules_install' echo 'INSTALL_MOD_PATH=$RPM_BUILD_ROOT make %{_smp_mflags} modules_install'
echo "%ifarch ia64"
echo 'cp $KBUILD_IMAGE $RPM_BUILD_ROOT'"/boot/efi/vmlinuz-$KERNELRELEASE"
echo 'ln -s '"efi/vmlinuz-$KERNELRELEASE" '$RPM_BUILD_ROOT'"/boot/"
echo "%else"
echo 'cp $KBUILD_IMAGE $RPM_BUILD_ROOT'"/boot/vmlinuz-$KERNELRELEASE" echo 'cp $KBUILD_IMAGE $RPM_BUILD_ROOT'"/boot/vmlinuz-$KERNELRELEASE"
echo "%endif"
echo 'cp System.map $RPM_BUILD_ROOT'"/boot/System.map-$KERNELRELEASE" echo 'cp System.map $RPM_BUILD_ROOT'"/boot/System.map-$KERNELRELEASE"
......
...@@ -96,6 +96,7 @@ foreach $object (keys(%object)) { ...@@ -96,6 +96,7 @@ foreach $object (keys(%object)) {
$from !~ /\.debug_ranges$/ && $from !~ /\.debug_ranges$/ &&
$from !~ /\.debug_line$/ && $from !~ /\.debug_line$/ &&
$from !~ /\.debug_frame$/ && $from !~ /\.debug_frame$/ &&
$from !~ /\.debug_loc$/ &&
$from !~ /\.exitcall\.exit$/ && $from !~ /\.exitcall\.exit$/ &&
$from !~ /\.eh_frame$/ && $from !~ /\.eh_frame$/ &&
$from !~ /\.stab$/)) { $from !~ /\.stab$/)) {
......
...@@ -98,6 +98,7 @@ foreach $object (sort(keys(%object))) { ...@@ -98,6 +98,7 @@ foreach $object (sort(keys(%object))) {
$from !~ /\.pdr$/ && $from !~ /\.pdr$/ &&
$from !~ /\__param$/ && $from !~ /\__param$/ &&
$from !~ /\.altinstructions/ && $from !~ /\.altinstructions/ &&
$from !~ /\.eh_frame/ &&
$from !~ /\.debug_/)) { $from !~ /\.debug_/)) {
printf("Error: %s %s refers to %s\n", $object, $from, $line); printf("Error: %s %s refers to %s\n", $object, $from, $line);
} }
......
#!/usr/bin/perl
# Copyright 2004 - Ryan Anderson <ryan@michonline.com> GPL v2
use strict;
use warnings;
use Digest::MD5;
require 5.006;
if (@ARGV != 1) {
print <<EOT;
Usage: setlocalversion <srctree>
EOT
exit(1);
}
my ($srctree) = @ARGV;
chdir($srctree);
my @LOCALVERSIONS = ();
# We are going to use the following commands to try and determine if this
# repository is at a Version boundary (i.e, 2.6.10 vs 2.6.10 + some patches) We
# currently assume that all meaningful version boundaries are marked by a tag.
# We don't care what the tag is, just that something exists.
# Git/Cogito store the top-of-tree "commit" in .git/HEAD
# A list of known tags sits in .git/refs/tags/
#
# The simple trick here is to just compare the two of these, and if we get a
# match, return nothing, otherwise, return a subset of the SHA-1 hash in
# .git/HEAD
sub do_git_checks {
open(H,"<.git/HEAD") or return;
my $head = <H>;
chomp $head;
close(H);
opendir(D,".git/refs/tags") or return;
foreach my $tagfile (grep !/^\.{1,2}$/, readdir(D)) {
open(F,"<.git/refs/tags/" . $tagfile) or return;
my $tag = <F>;
chomp $tag;
close(F);
return if ($tag eq $head);
}
closedir(D);
push @LOCALVERSIONS, "g" . substr($head,0,8);
}
if ( -d ".git") {
do_git_checks();
}
printf "-%s\n", join("-",@LOCALVERSIONS) if (scalar @LOCALVERSIONS > 0);
#
# Configuration for initramfs
#
config INITRAMFS_SOURCE
string "Initramfs source file(s)"
default ""
help
This can be either a single cpio archive with a .cpio suffix or a
space-separated list of directories and files for building the
initramfs image. A cpio archive should contain a filesystem archive
to be used as an initramfs image. Directories should contain a
filesystem layout to be included in the initramfs image. Files
should contain entries according to the format described by the
"usr/gen_init_cpio" program in the kernel tree.
When multiple directories and files are specified then the
initramfs image will be the aggregate of all of them.
See <file:Documentation/early-userspace/README for more details.
If you are not sure, leave it blank.
config INITRAMFS_ROOT_UID
int "User ID to map to 0 (user root)"
depends on INITRAMFS_SOURCE!=""
default "0"
help
This setting is only meaningful if the INITRAMFS_SOURCE is
contains a directory. Setting this user ID (UID) to something
other than "0" will cause all files owned by that UID to be
owned by user root in the initial ramdisk image.
If you are not sure, leave it set to "0".
config INITRAMFS_ROOT_GID
int "Group ID to map to 0 (group root)"
depends on INITRAMFS_SOURCE!=""
default "0"
help
This setting is only meaningful if the INITRAMFS_SOURCE is
contains a directory. Setting this group ID (GID) to something
other than "0" will cause all files owned by that GID to be
owned by group root in the initial ramdisk image.
If you are not sure, leave it set to "0".
...@@ -27,7 +27,7 @@ quotefixed_initramfs_source := $(shell echo $(CONFIG_INITRAMFS_SOURCE)) ...@@ -27,7 +27,7 @@ quotefixed_initramfs_source := $(shell echo $(CONFIG_INITRAMFS_SOURCE))
filechk_initramfs_list = $(CONFIG_SHELL) \ filechk_initramfs_list = $(CONFIG_SHELL) \
$(srctree)/scripts/gen_initramfs_list.sh $(gen_initramfs_args) $(quotefixed_initramfs_source) $(srctree)/scripts/gen_initramfs_list.sh $(gen_initramfs_args) $(quotefixed_initramfs_source)
$(obj)/initramfs_list: FORCE $(obj)/initramfs_list: $(obj)/Makefile FORCE
$(call filechk,initramfs_list) $(call filechk,initramfs_list)
quiet_cmd_cpio = CPIO $@ quiet_cmd_cpio = CPIO $@
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment