Add support of Cavium Liquidio ethernet adapters

Following patch V8 adds support for Cavium Liquidio pci express
based 10Gig ethernet adapters.
1) Consolidated all debug macros to either call dev_* or
   netdev_* macros directly, feedback from previous patch.
2) Changed soft commands to avoid crash when running
   in interrupt context.
3) Fixed link status not reflecting correct status when NetworkManager
   is running. Added MODULE_FIRMWARE declarations.

Following were the previous patches.
Patch V7:
1) Minor comments from v6 release regarding debug statements.
2) Fix for large multicast lists.
3) Fixed lockup issue if port initialization fails.
4) Enabled MSI by default.
https://patchwork.ozlabs.org/patch/464441/

Patch V6:
1) Addressed the uint64 vs u64 issue, feedback from previous patch.
2) Consolidated some receive processing routines.
3) Removed link status polling method.
https://patchwork.ozlabs.org/patch/459514/

Patch V5:
Based on the feedback from earlier patches with regards to
consolidation of common functions like device init, register
programming for cn66xx and cn68xx devices.
https://patchwork.ozlabs.org/patch/438979/

Patch V4:
Following were the changes based on the feedback from earlier patch:
1) Added mmiowb while synchronizing queue updates and other hw
   interactions.
2) Statistics will now be incremented non-atomically per each ring.
   liquidio_get_stats will add stats of each ring while reporting the
   total statistics counts.
3) Modified liquidio_ioctl  to return proper return codes.
4) Modified device naming to use standard Ethernet naming.
5) Global function names in the driver will have lio_/liquidio_/octeon_
   prefix.
6) Ethtool related changes for:
   Removed redundant stats and jiffies.
   Use default ethtool handler of link status.
   Speed setting will make use of ethtool_cmd_speed_set.
7) Added checks for pci_map_*  return codes.
8) Check for signals while waiting in interruptible mode
https://patchwork.ozlabs.org/patch/435073/

Patch v3:
Implemented feedback from previous patch like:
Removed NAPI Config and DEBUG config options, added BQL and xmit_more
support.
https://patchwork.ozlabs.org/patch/422749/

Patch V2:
Implemented feedback from previous patch.
https://patchwork.ozlabs.org/patch/413539/

First Patch:
https://patchwork.ozlabs.org/patch/412946/Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: Robert Richter <Robert.Richter@caviumnetworks.com>
Signed-off-by: Aleksey Makarov <Aleksey.Makarov@caviumnetworks.com>
Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS

@@ -2442,6 +2442,17 @@ S:	Maintained
 F:	drivers/iio/light/cm*
 F:	Documentation/devicetree/bindings/i2c/trivial-devices.txt
 
+CAVIUM LIQUIDIO NETWORK DRIVER
+M:     Derek Chickles <derek.chickles@caviumnetworks.com>
+M:     Satanand Burla <satananda.burla@caviumnetworks.com>
+M:     Felix Manlunas <felix.manlunas@caviumnetworks.com>
+M:     Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
+L:     netdev@vger.kernel.org
+W:     http://www.cavium.com
+S:     Supported
+F:     drivers/net/ethernet/cavium/
+F:     drivers/net/ethernet/cavium/liquidio/
+
 CC2520 IEEE-802.15.4 RADIO DRIVER
 M:	Varka Bhadram <varkabhadram@gmail.com>
 L:	linux-wpan@vger.kernel.org

drivers/net/ethernet/cavium/Kconfig

@@ -4,37 +4,53 @@
 
 config NET_VENDOR_CAVIUM
 	tristate "Cavium ethernet drivers"
-	depends on PCI && 64BIT
+	depends on PCI
+	default y
 	---help---
-	  Enable support for the Cavium ThunderX Network Interface
-	  Controller (NIC). The NIC provides the controller and DMA
-	  engines to move network traffic to/from the memory. The NIC
-	  works closely with TNS, BGX and SerDes to implement the
-	  functions replacing and virtualizing those of a typical
-	  standalone PCIe NIC chip.
+	  Select this option if you want enable Cavium network support.
 
-	  If you have a Cavium Thunder board, say Y.
+	  If you have a Cavium SoC or network adapter, say Y.
 
 if NET_VENDOR_CAVIUM
 
 config THUNDER_NIC_PF
 	tristate "Thunder Physical function driver"
-	default NET_VENDOR_CAVIUM
+	depends on 64BIT
+	default ARCH_THUNDER
 	select THUNDER_NIC_BGX
 	---help---
 	  This driver supports Thunder's NIC physical function.
+	  The NIC provides the controller and DMA engines to
+	  move network traffic to/from the memory. The NIC
+	  works closely with TNS, BGX and SerDes to implement the
+	  functions replacing and virtualizing those of a typical
+	  standalone PCIe NIC chip.
 
 config THUNDER_NIC_VF
 	tristate "Thunder Virtual function driver"
-	default NET_VENDOR_CAVIUM
+	depends on 64BIT
+	default ARCH_THUNDER
 	---help---
 	  This driver supports Thunder's NIC virtual function
 
 config	THUNDER_NIC_BGX
 	tristate "Thunder MAC interface driver (BGX)"
-	default NET_VENDOR_CAVIUM
+	depends on 64BIT
+	default ARCH_THUNDER
 	---help---
 	  This driver supports programming and controlling of MAC
 	  interface from NIC physical function driver.
 
+config LIQUIDIO
+	tristate "Cavium LiquidIO support"
+	select PTP_1588_CLOCK
+	select FW_LOADER
+	select LIBCRC32
+	---help---
+	  This driver supports Cavium LiquidIO Intelligent Server Adapters
+	  based on CN66XX and CN68XX chips.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called liquidio.  This is recommended.
+
 endif # NET_VENDOR_CAVIUM

drivers/net/ethernet/cavium/Makefile

 #
 # Makefile for the Cavium ethernet device drivers.
 #
-
 obj-$(CONFIG_NET_VENDOR_CAVIUM) += thunder/
+obj-$(CONFIG_NET_VENDOR_CAVIUM) += liquidio/

drivers/net/ethernet/cavium/liquidio/Makefile

+#
+# Cavium Liquidio ethernet device driver
+#
+obj-$(CONFIG_LIQUIDIO) += liquidio.o
+
+liquidio-objs := lio_main.o  \
+	      lio_ethtool.o      \
+	      request_manager.o  \
+	      response_manager.o \
+	      octeon_device.o    \
+	      cn66xx_device.o    \
+	      cn68xx_device.o    \
+	      octeon_mem_ops.o   \
+	      octeon_droq.o      \
+	      octeon_console.o   \
+	      octeon_nic.o

drivers/net/ethernet/cavium/liquidio/cn66xx_device.h

+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+*          Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT.  See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+
+/*! \file  cn66xx_device.h
+ *  \brief Host Driver: Routines that perform CN66XX specific operations.
+ */
+
+#ifndef __CN66XX_DEVICE_H__
+#define  __CN66XX_DEVICE_H__
+
+/* Register address and configuration for a CN6XXX devices.
+ * If device specific changes need to be made then add a struct to include
+ * device specific fields as shown in the commented section
+ */
+struct octeon_cn6xxx {
+	/** PCI interrupt summary register */
+	u8 __iomem *intr_sum_reg64;
+
+	/** PCI interrupt enable register */
+	u8 __iomem *intr_enb_reg64;
+
+	/** The PCI interrupt mask used by interrupt handler */
+	u64 intr_mask64;
+
+	struct octeon_config *conf;
+
+	/* Example additional fields - not used currently
+	 *  struct {
+	 *  }cn6xyz;
+	 */
+
+	/* For the purpose of atomic access to interrupt enable reg */
+	spinlock_t lock_for_droq_int_enb_reg;
+
+};
+
+enum octeon_pcie_mps {
+	PCIE_MPS_DEFAULT = -1,	/* Use the default setup by BIOS */
+	PCIE_MPS_128B = 0,
+	PCIE_MPS_256B = 1
+};
+
+enum octeon_pcie_mrrs {
+	PCIE_MRRS_DEFAULT = -1,	/* Use the default setup by BIOS */
+	PCIE_MRRS_128B = 0,
+	PCIE_MRRS_256B = 1,
+	PCIE_MRRS_512B = 2,
+	PCIE_MRRS_1024B = 3,
+	PCIE_MRRS_2048B = 4,
+	PCIE_MRRS_4096B = 5
+};
+
+/* Common functions for 66xx and 68xx */
+int lio_cn6xxx_soft_reset(struct octeon_device *oct);
+void lio_cn6xxx_enable_error_reporting(struct octeon_device *oct);
+void lio_cn6xxx_setup_pcie_mps(struct octeon_device *oct,
+			       enum octeon_pcie_mps mps);
+void lio_cn6xxx_setup_pcie_mrrs(struct octeon_device *oct,
+				enum octeon_pcie_mrrs mrrs);
+void lio_cn6xxx_setup_global_input_regs(struct octeon_device *oct);
+void lio_cn6xxx_setup_global_output_regs(struct octeon_device *oct);
+void lio_cn6xxx_setup_iq_regs(struct octeon_device *oct, u32 iq_no);
+void lio_cn6xxx_setup_oq_regs(struct octeon_device *oct, u32 oq_no);
+void lio_cn6xxx_enable_io_queues(struct octeon_device *oct);
+void lio_cn6xxx_disable_io_queues(struct octeon_device *oct);
+void lio_cn6xxx_process_pcie_error_intr(struct octeon_device *oct, u64 intr64);
+int lio_cn6xxx_process_droq_intr_regs(struct octeon_device *oct);
+irqreturn_t lio_cn6xxx_process_interrupt_regs(void *dev);
+void lio_cn6xxx_reinit_regs(struct octeon_device *oct);
+void lio_cn6xxx_bar1_idx_setup(struct octeon_device *oct, u64 core_addr,
+			       u32 idx, int valid);
+void lio_cn6xxx_bar1_idx_write(struct octeon_device *oct, u32 idx, u32 mask);
+u32 lio_cn6xxx_bar1_idx_read(struct octeon_device *oct, u32 idx);
+u32
+lio_cn6xxx_update_read_index(struct octeon_device *oct __attribute__((unused)),
+			     struct octeon_instr_queue *iq);
+void lio_cn6xxx_enable_interrupt(void *chip);
+void lio_cn6xxx_disable_interrupt(void *chip);
+void cn6xxx_get_pcie_qlmport(struct octeon_device *oct);
+void lio_cn6xxx_setup_reg_address(struct octeon_device *oct, void *chip,
+				  struct octeon_reg_list *reg_list);
+u32 lio_cn6xxx_coprocessor_clock(struct octeon_device *oct);
+u32 lio_cn6xxx_get_oq_ticks(struct octeon_device *oct, u32 time_intr_in_us);
+int lio_setup_cn66xx_octeon_device(struct octeon_device *);
+int lio_validate_cn6xxx_config_info(struct octeon_device *oct,
+				    struct octeon_config *);
+
+#endif

drivers/net/ethernet/cavium/liquidio/cn68xx_device.c

+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+*          Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT.  See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/list.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/kthread.h>
+#include <linux/netdevice.h>
+#include "octeon_config.h"
+#include "liquidio_common.h"
+#include "octeon_droq.h"
+#include "octeon_iq.h"
+#include "response_manager.h"
+#include "octeon_device.h"
+#include "octeon_nic.h"
+#include "octeon_main.h"
+#include "octeon_network.h"
+#include "cn66xx_regs.h"
+#include "cn66xx_device.h"
+#include "cn68xx_regs.h"
+#include "cn68xx_device.h"
+#include "liquidio_image.h"
+#include "octeon_mem_ops.h"
+
+static void lio_cn68xx_set_dpi_regs(struct octeon_device *oct)
+{
+	u32 i;
+	u32 fifo_sizes[6] = { 3, 3, 1, 1, 1, 8 };
+
+	lio_pci_writeq(oct, CN6XXX_DPI_DMA_CTL_MASK, CN6XXX_DPI_DMA_CONTROL);
+	dev_dbg(&oct->pci_dev->dev, "DPI_DMA_CONTROL: 0x%016llx\n",
+		lio_pci_readq(oct, CN6XXX_DPI_DMA_CONTROL));
+
+	for (i = 0; i < 6; i++) {
+		/* Prevent service of instruction queue for all DMA engines
+		 * Engine 5 will remain 0. Engines 0 - 4 will be setup by
+		 * core.
+		 */
+		lio_pci_writeq(oct, 0, CN6XXX_DPI_DMA_ENG_ENB(i));
+		lio_pci_writeq(oct, fifo_sizes[i], CN6XXX_DPI_DMA_ENG_BUF(i));
+		dev_dbg(&oct->pci_dev->dev, "DPI_ENG_BUF%d: 0x%016llx\n", i,
+			lio_pci_readq(oct, CN6XXX_DPI_DMA_ENG_BUF(i)));
+	}
+
+	/* DPI_SLI_PRT_CFG has MPS and MRRS settings that will be set
+	 * separately.
+	 */
+
+	lio_pci_writeq(oct, 1, CN6XXX_DPI_CTL);
+	dev_dbg(&oct->pci_dev->dev, "DPI_CTL: 0x%016llx\n",
+		lio_pci_readq(oct, CN6XXX_DPI_CTL));
+}
+
+static int lio_cn68xx_soft_reset(struct octeon_device *oct)
+{
+	lio_cn6xxx_soft_reset(oct);
+	lio_cn68xx_set_dpi_regs(oct);
+
+	return 0;
+}
+
+static void lio_cn68xx_setup_pkt_ctl_regs(struct octeon_device *oct)
+{
+	struct octeon_cn6xxx *cn68xx = (struct octeon_cn6xxx *)oct->chip;
+	u64 pktctl, tx_pipe, max_oqs;
+
+	pktctl = octeon_read_csr64(oct, CN6XXX_SLI_PKT_CTL);
+
+	/* 68XX specific */
+	max_oqs = CFG_GET_OQ_MAX_Q(CHIP_FIELD(oct, cn6xxx, conf));
+	tx_pipe  = octeon_read_csr64(oct, CN68XX_SLI_TX_PIPE);
+	tx_pipe &= 0xffffffffff00ffffULL; /* clear out NUMP field */
+	tx_pipe |= max_oqs << 16; /* put max_oqs in NUMP field */
+	octeon_write_csr64(oct, CN68XX_SLI_TX_PIPE, tx_pipe);
+
+	if (CFG_GET_IS_SLI_BP_ON(cn68xx->conf))
+		pktctl |= 0xF;
+	else
+		/* Disable per-port backpressure. */
+		pktctl &= ~0xF;
+	octeon_write_csr64(oct, CN6XXX_SLI_PKT_CTL, pktctl);
+}
+
+static int lio_cn68xx_setup_device_regs(struct octeon_device *oct)
+{
+	lio_cn6xxx_setup_pcie_mps(oct, PCIE_MPS_DEFAULT);
+	lio_cn6xxx_setup_pcie_mrrs(oct, PCIE_MRRS_256B);
+	lio_cn6xxx_enable_error_reporting(oct);
+
+	lio_cn6xxx_setup_global_input_regs(oct);
+	lio_cn68xx_setup_pkt_ctl_regs(oct);
+	lio_cn6xxx_setup_global_output_regs(oct);
+
+	/* Default error timeout value should be 0x200000 to avoid host hang
+	 * when reads invalid register
+	 */
+	octeon_write_csr64(oct, CN6XXX_SLI_WINDOW_CTL, 0x200000ULL);
+
+	return 0;
+}
+
+static inline void lio_cn68xx_vendor_message_fix(struct octeon_device *oct)
+{
+	u32 val = 0;
+
+	/* Set M_VEND1_DRP and M_VEND0_DRP bits */
+	pci_read_config_dword(oct->pci_dev, CN6XXX_PCIE_FLTMSK, &val);
+	val |= 0x3;
+	pci_write_config_dword(oct->pci_dev, CN6XXX_PCIE_FLTMSK, val);
+}
+
+int lio_is_210nv(struct octeon_device *oct)
+{
+	u64 mio_qlm4_cfg = lio_pci_readq(oct, CN6XXX_MIO_QLM4_CFG);
+
+	return ((mio_qlm4_cfg & CN6XXX_MIO_QLM_CFG_MASK) == 0);
+}
+
+int lio_setup_cn68xx_octeon_device(struct octeon_device *oct)
+{
+	struct octeon_cn6xxx *cn68xx = (struct octeon_cn6xxx *)oct->chip;
+	u16 card_type = LIO_410NV;
+
+	if (octeon_map_pci_barx(oct, 0, 0))
+		return 1;
+
+	if (octeon_map_pci_barx(oct, 1, MAX_BAR1_IOREMAP_SIZE)) {
+		dev_err(&oct->pci_dev->dev, "%s CN68XX BAR1 map failed\n",
+			__func__);
+		octeon_unmap_pci_barx(oct, 0);
+		return 1;
+	}
+
+	spin_lock_init(&cn68xx->lock_for_droq_int_enb_reg);
+
+	oct->fn_list.setup_iq_regs = lio_cn6xxx_setup_iq_regs;
+	oct->fn_list.setup_oq_regs = lio_cn6xxx_setup_oq_regs;
+
+	oct->fn_list.process_interrupt_regs = lio_cn6xxx_process_interrupt_regs;
+	oct->fn_list.soft_reset = lio_cn68xx_soft_reset;
+	oct->fn_list.setup_device_regs = lio_cn68xx_setup_device_regs;
+	oct->fn_list.reinit_regs = lio_cn6xxx_reinit_regs;
+	oct->fn_list.update_iq_read_idx = lio_cn6xxx_update_read_index;
+
+	oct->fn_list.bar1_idx_setup = lio_cn6xxx_bar1_idx_setup;
+	oct->fn_list.bar1_idx_write = lio_cn6xxx_bar1_idx_write;
+	oct->fn_list.bar1_idx_read = lio_cn6xxx_bar1_idx_read;
+
+	oct->fn_list.enable_interrupt = lio_cn6xxx_enable_interrupt;
+	oct->fn_list.disable_interrupt = lio_cn6xxx_disable_interrupt;
+
+	oct->fn_list.enable_io_queues = lio_cn6xxx_enable_io_queues;
+	oct->fn_list.disable_io_queues = lio_cn6xxx_disable_io_queues;
+
+	lio_cn6xxx_setup_reg_address(oct, oct->chip, &oct->reg_list);
+
+	/* Determine variant of card */
+	if (lio_is_210nv(oct))
+		card_type = LIO_210NV;
+
+	cn68xx->conf = (struct octeon_config *)
+		       oct_get_config_info(oct, card_type);
+	if (!cn68xx->conf) {
+		dev_err(&oct->pci_dev->dev, "%s No Config found for CN68XX %s\n",
+			__func__,
+			(card_type == LIO_410NV) ? LIO_410NV_NAME :
+			LIO_210NV_NAME);
+		octeon_unmap_pci_barx(oct, 0);
+		octeon_unmap_pci_barx(oct, 1);
+		return 1;
+	}
+
+	oct->coproc_clock_rate = 1000000ULL * lio_cn6xxx_coprocessor_clock(oct);
+
+	lio_cn68xx_vendor_message_fix(oct);
+
+	return 0;
+}

drivers/net/ethernet/cavium/liquidio/cn68xx_device.h

+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+*          Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT.  See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+
+/*! \file  cn68xx_device.h
+ *  \brief Host Driver: Routines that perform CN68XX specific operations.
+ */
+
+#ifndef __CN68XX_DEVICE_H__
+#define  __CN68XX_DEVICE_H__
+
+int lio_setup_cn68xx_octeon_device(struct octeon_device *oct);
+int lio_is_210nv(struct octeon_device *oct);
+
+#endif

drivers/net/ethernet/cavium/liquidio/cn68xx_regs.h

+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+*          Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT.  See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+
+/*! \file cn68xx_regs.h
+ *  \brief Host Driver: Register Address and Register Mask values for
+ *  Octeon CN68XX devices. The register map for CN66XX is the same
+ *  for most registers. This file has the other registers that are
+ *  68XX-specific.
+ */
+
+#ifndef __CN68XX_REGS_H__
+#define __CN68XX_REGS_H__
+#include "cn66xx_regs.h"
+
+/*###################### REQUEST QUEUE #########################*/
+
+#define    CN68XX_SLI_IQ_PORT0_PKIND             0x0800
+
+#define    CN68XX_SLI_IQ_PORT_PKIND(iq)           \
+	(CN68XX_SLI_IQ_PORT0_PKIND + ((iq) * CN6XXX_IQ_OFFSET))
+
+/*############################ OUTPUT QUEUE #########################*/
+
+/* Starting pipe number and number of pipes used by the SLI packet output. */
+#define    CN68XX_SLI_TX_PIPE                    0x1230
+
+/*######################## INTERRUPTS #########################*/
+
+/*------------------ Interrupt Masks ----------------*/
+#define    CN68XX_INTR_PIPE_ERR                  BIT_ULL(61)
+
+#endif

drivers/net/ethernet/cavium/liquidio/liquidio_image.h

+/**********************************************************************
+* Author: Cavium, Inc.
+*
+* Contact: support@cavium.com
+*          Please include "LiquidIO" in the subject.
+*
+* Copyright (c) 2003-2015 Cavium, Inc.
+*
+* This file is free software; you can redistribute it and/or modify
+* it under the terms of the GNU General Public License, Version 2, as
+* published by the Free Software Foundation.
+*
+* This file is distributed in the hope that it will be useful, but
+* AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+* NONINFRINGEMENT.  See the GNU General Public License for more
+* details.
+*
+* This file may also be available under a different license from Cavium.
+* Contact Cavium, Inc. for more information
+**********************************************************************/
+#ifndef _LIQUIDIO_IMAGE_H_
+#define _LIQUIDIO_IMAGE_H_
+
+#define LIO_MAX_FW_TYPE_LEN     (8)
+#define LIO_MAX_FW_FILENAME_LEN (256)
+#define LIO_FW_DIR              "liquidio/"
+#define LIO_FW_BASE_NAME        "lio_"
+#define LIO_FW_NAME_SUFFIX      ".bin"
+#define LIO_FW_NAME_TYPE_NIC    "nic"
+#define LIO_FW_NAME_TYPE_NONE   "none"
+#define LIO_MAX_FIRMWARE_VERSION_LEN 16
+
+#define LIO_MAX_BOOTCMD_LEN 1024
+#define LIO_MAX_IMAGES 16
+#define LIO_NIC_MAGIC 0x434E4943     /* "CNIC" */
+struct octeon_firmware_desc {
+	u64 addr;
+	u32 len;
+	u32 crc32;         /* crc32 of image */
+};
+
+/* Following the header is a list of 64-bit aligned binary images,
+ * as described by the desc field.
+ * Numeric fields are in network byte order.
+ */
+struct octeon_firmware_file_header {
+	u32 magic;
+	char version[LIO_MAX_FIRMWARE_VERSION_LEN];
+	char bootcmd[LIO_MAX_BOOTCMD_LEN];
+	u32 num_images;
+	struct octeon_firmware_desc desc[LIO_MAX_IMAGES];
+	u32 pad;
+	u32 crc32;         /* header checksum */
+};
+
+#endif /* _LIQUIDIO_IMAGE_H_ */

drivers/net/ethernet/cavium/liquidio/octeon_mem_ops.h

+/**********************************************************************
+ * Author: Cavium, Inc.
+ *
+ * Contact: support@cavium.com
+ *          Please include "LiquidIO" in the subject.
+ *
+ * Copyright (c) 2003-2015 Cavium, Inc.
+ *
+ * This file is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This file is distributed in the hope that it will be useful, but
+ * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or
+ * NONINFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * This file may also be available under a different license from Cavium.
+ * Contact Cavium, Inc. for more information
+ **********************************************************************/
+
+/*!  \file octeon_mem_ops.h
+ *   \brief Host Driver: Routines used to read/write Octeon memory.
+ */
+
+#ifndef __OCTEON_MEM_OPS_H__
+#define __OCTEON_MEM_OPS_H__
+
+/**  Read a 64-bit value from a BAR1 mapped core memory address.
+ *   @param  oct        -  pointer to the octeon device.
+ *   @param  core_addr  -  the address to read from.
+ *
+ *   The range_idx gives the BAR1 index register for the range of address
+ *   in which core_addr is mapped.
+ *
+ *   @return  64-bit value read from Core memory
+ */
+u64 octeon_read_device_mem64(struct octeon_device *oct, u64 core_addr);
+
+/**  Read a 32-bit value from a BAR1 mapped core memory address.
+ *   @param  oct        -  pointer to the octeon device.
+ *   @param  core_addr  -  the address to read from.
+ *
+ *   @return  32-bit value read from Core memory
+ */
+u32 octeon_read_device_mem32(struct octeon_device *oct, u64 core_addr);
+
+/**  Write a 32-bit value to a BAR1 mapped core memory address.
+ *   @param  oct        -  pointer to the octeon device.
+ *   @param  core_addr  -  the address to write to.
+ *   @param  val        -  32-bit value to write.
+ */
+void
+octeon_write_device_mem32(struct octeon_device *oct,
+			  u64 core_addr,
+			  u32 val);
+
+/** Read multiple bytes from Octeon memory.
+ */
+void
+octeon_pci_read_core_mem(struct octeon_device *oct,
+			 u64 coreaddr,
+			 u8 *buf,
+			 u32 len);
+
+/** Write multiple bytes into Octeon memory.
+ */
+void
+octeon_pci_write_core_mem(struct octeon_device *oct,
+			  u64 coreaddr,
+			  u8 *buf,
+			  u32 len);
+
+#endif