Commit f27e7805 authored by Arvind Yadav's avatar Arvind Yadav Committed by Wolfram Sang

i2c: at91: Fix compilation warning.

Replace '%d' by '%zu' to fix the following type of compilation warnings:

drivers/i2c/busses/i2c-at91.c:277:2: warning: format ‘%d’ expects argument of type ‘int’, but argument 5 has type ‘size_t’ [-Wformat=]
  dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len);
  ^
Signed-off-by: default avatarArvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: default avatarLudovic Desroches <ludovic.desroches@microchip.com>
Tested-by: default avatarWolfram Sang <wsa@the-dreams.de>
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
parent 56a6cb88
...@@ -274,7 +274,7 @@ static void at91_twi_write_next_byte(struct at91_twi_dev *dev) ...@@ -274,7 +274,7 @@ static void at91_twi_write_next_byte(struct at91_twi_dev *dev)
if (!dev->use_alt_cmd) if (!dev->use_alt_cmd)
at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len); dev_dbg(dev->dev, "wrote 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
++dev->buf; ++dev->buf;
} }
...@@ -402,7 +402,7 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev) ...@@ -402,7 +402,7 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
dev->msg->flags &= ~I2C_M_RECV_LEN; dev->msg->flags &= ~I2C_M_RECV_LEN;
dev->buf_len += *dev->buf; dev->buf_len += *dev->buf;
dev->msg->len = dev->buf_len + 1; dev->msg->len = dev->buf_len + 1;
dev_dbg(dev->dev, "received block length %d\n", dev_dbg(dev->dev, "received block length %zu\n",
dev->buf_len); dev->buf_len);
} else { } else {
/* abort and send the stop by reading one more byte */ /* abort and send the stop by reading one more byte */
...@@ -415,7 +415,7 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev) ...@@ -415,7 +415,7 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
if (!dev->use_alt_cmd && dev->buf_len == 1) if (!dev->use_alt_cmd && dev->buf_len == 1)
at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP); at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
dev_dbg(dev->dev, "read 0x%x, to go %d\n", *dev->buf, dev->buf_len); dev_dbg(dev->dev, "read 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
++dev->buf; ++dev->buf;
} }
...@@ -622,7 +622,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) ...@@ -622,7 +622,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
* writing the corresponding bit into the Control Register. * writing the corresponding bit into the Control Register.
*/ */
dev_dbg(dev->dev, "transfer: %s %d bytes.\n", dev_dbg(dev->dev, "transfer: %s %zu bytes.\n",
(dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len); (dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len);
reinit_completion(&dev->cmd_complete); reinit_completion(&dev->cmd_complete);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment