Skip to content

L
linux
Commit f33f6f0c authored by Florian Tobias Schandinat's avatar Florian Tobias Schandinat
Browse files
Options

Merge branch 'viafb-pll' into viafb-next 

Conflicts:
	drivers/video/via/viamode.c
Signed-off-by: default avatarFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
parents 75ec72f8 2946294f
Show whitespace changes
Inline Side-by-side
Showing with 588 additions and 408 deletions
drivers/video/Kconfig
View file @ f33f6f0c
......@@ -1607,6 +1607,17 @@ config FB_VIA_DIRECT_PROCFS
correct output device configuration.
Its use is strongly discouraged.
config FB_VIA_X_COMPATIBILITY
bool "X server compatibility"
depends on FB_VIA
default n
help
This option reduces the functionality (power saving, ...) of the
framebuffer to avoid negative impact on the OpenChrome X server.
If you use any X server other than fbdev you should enable this
otherwise it should be safe to disable it and allow using all
features.
endif
config FB_NEOMAGIC
......
drivers/video/via/Makefile
View file @ f33f6f0c
......@@ -6,4 +6,4 @@ obj-$(CONFIG_FB_VIA) += viafb.o
viafb-y :=viafbdev.o hw.o via_i2c.o dvi.o lcd.o ioctl.o accel.o \
via_utility.o vt1636.o global.o tblDPASetting.o viamode.o \
via-core.o via-gpio.o via_modesetting.o
via-core.o via-gpio.o via_modesetting.o via_clock.o
drivers/video/via/hw.c
View file @ f33f6f0c
......@@ -22,273 +22,82 @@
#include <linux/via-core.h>
#include <asm/olpc.h>
#include "global.h"
static struct pll_config cle266_pll_config[] = {
{19, 4, 0},
{26, 5, 0},
{28, 5, 0},
{31, 5, 0},
{33, 5, 0},
{55, 5, 0},
{102, 5, 0},
{53, 6, 0},
{92, 6, 0},
{98, 6, 0},
{112, 6, 0},
{41, 7, 0},
{60, 7, 0},
{99, 7, 0},
{100, 7, 0},
{83, 8, 0},
{86, 8, 0},
{108, 8, 0},
{87, 9, 0},
{118, 9, 0},
{95, 12, 0},
{115, 12, 0},
{108, 13, 0},
{83, 17, 0},
{67, 20, 0},
{86, 20, 0},
{98, 20, 0},
{121, 24, 0},
{99, 29, 0},
{33, 3, 1},
{15, 4, 1},
{23, 4, 1},
{37, 5, 1},
{83, 5, 1},
{85, 5, 1},
{94, 5, 1},
{103, 5, 1},
{109, 5, 1},
{113, 5, 1},
{121, 5, 1},
{82, 6, 1},
{31, 7, 1},
{55, 7, 1},
{84, 7, 1},
{83, 8, 1},
{76, 9, 1},
{127, 9, 1},
{33, 4, 2},
{75, 4, 2},
{119, 4, 2},
{121, 4, 2},
{91, 5, 2},
{118, 5, 2},
{83, 6, 2},
{109, 6, 2},
{90, 7, 2},
{93, 2, 3},
{53, 3, 3},
{73, 4, 3},
{89, 4, 3},
{105, 4, 3},
{117, 4, 3},
{101, 5, 3},
{121, 5, 3},
{127, 5, 3},
{99, 7, 3}
#include "via_clock.h"
static struct pll_limit cle266_pll_limits[] = {
{19, 19, 4, 0},
{26, 102, 5, 0},
{53, 112, 6, 0},
{41, 100, 7, 0},
{83, 108, 8, 0},
{87, 118, 9, 0},
{95, 115, 12, 0},
{108, 108, 13, 0},
{83, 83, 17, 0},
{67, 98, 20, 0},
{121, 121, 24, 0},
{99, 99, 29, 0},
{33, 33, 3, 1},
{15, 23, 4, 1},
{37, 121, 5, 1},
{82, 82, 6, 1},
{31, 84, 7, 1},
{83, 83, 8, 1},
{76, 127, 9, 1},
{33, 121, 4, 2},
{91, 118, 5, 2},
{83, 109, 6, 2},
{90, 90, 7, 2},
{93, 93, 2, 3},
{53, 53, 3, 3},
{73, 117, 4, 3},
{101, 127, 5, 3},
{99, 99, 7, 3}
};
static struct pll_config k800_pll_config[] = {
{22, 2, 0},
{28, 3, 0},
{81, 3, 1},
{85, 3, 1},
{98, 3, 1},
{112, 3, 1},
{86, 4, 1},
{166, 4, 1},
{109, 5, 1},
{113, 5, 1},
{121, 5, 1},
{131, 5, 1},
{143, 5, 1},
{153, 5, 1},
{66, 3, 2},
{68, 3, 2},
{95, 3, 2},
{106, 3, 2},
{116, 3, 2},
{93, 4, 2},
{119, 4, 2},
{121, 4, 2},
{133, 4, 2},
{137, 4, 2},
{117, 5, 2},
{118, 5, 2},
{120, 5, 2},
{124, 5, 2},
{132, 5, 2},
{137, 5, 2},
{141, 5, 2},
{166, 5, 2},
{170, 5, 2},
{191, 5, 2},
{206, 5, 2},
{208, 5, 2},
{30, 2, 3},
{69, 3, 3},
{82, 3, 3},
{83, 3, 3},
{109, 3, 3},
{114, 3, 3},
{125, 3, 3},
{89, 4, 3},
{103, 4, 3},
{117, 4, 3},
{126, 4, 3},
{150, 4, 3},
{161, 4, 3},
{121, 5, 3},
{127, 5, 3},
{131, 5, 3},
{134, 5, 3},
{148, 5, 3},
{169, 5, 3},
{172, 5, 3},
{182, 5, 3},
{195, 5, 3},
{196, 5, 3},
{208, 5, 3},
{66, 2, 4},
{85, 3, 4},
{141, 4, 4},
{146, 4, 4},
{161, 4, 4},
{177, 5, 4}
static struct pll_limit k800_pll_limits[] = {
{22, 22, 2, 0},
{28, 28, 3, 0},
{81, 112, 3, 1},
{86, 166, 4, 1},
{109, 153, 5, 1},
{66, 116, 3, 2},
{93, 137, 4, 2},
{117, 208, 5, 2},
{30, 30, 2, 3},
{69, 125, 3, 3},
{89, 161, 4, 3},
{121, 208, 5, 3},
{66, 66, 2, 4},
{85, 85, 3, 4},
{141, 161, 4, 4},
{177, 177, 5, 4}
};
static struct pll_config cx700_pll_config[] = {
{98, 3, 1},
{86, 4, 1},
{109, 5, 1},
{110, 5, 1},
{113, 5, 1},
{121, 5, 1},
{131, 5, 1},
{135, 5, 1},
{142, 5, 1},
{143, 5, 1},
{153, 5, 1},
{187, 5, 1},
{208, 5, 1},
{68, 2, 2},
{95, 3, 2},
{116, 3, 2},
{93, 4, 2},
{119, 4, 2},
{133, 4, 2},
{137, 4, 2},
{151, 4, 2},
{166, 4, 2},
{110, 5, 2},
{112, 5, 2},
{117, 5, 2},
{118, 5, 2},
{120, 5, 2},
{132, 5, 2},
{137, 5, 2},
{141, 5, 2},
{151, 5, 2},
{166, 5, 2},
{175, 5, 2},
{191, 5, 2},
{206, 5, 2},
{174, 7, 2},
{82, 3, 3},
{109, 3, 3},
{117, 4, 3},
{150, 4, 3},
{161, 4, 3},
{112, 5, 3},
{115, 5, 3},
{121, 5, 3},
{127, 5, 3},
{129, 5, 3},
{131, 5, 3},
{134, 5, 3},
{138, 5, 3},
{148, 5, 3},
{157, 5, 3},
{169, 5, 3},
{172, 5, 3},
{190, 5, 3},
{195, 5, 3},
{196, 5, 3},
{208, 5, 3},
{141, 5, 4},
{150, 5, 4},
{166, 5, 4},
{176, 5, 4},
{177, 5, 4},
{183, 5, 4},
{202, 5, 4}
static struct pll_limit cx700_pll_limits[] = {
{98, 98, 3, 1},
{86, 86, 4, 1},
{109, 208, 5, 1},
{68, 68, 2, 2},
{95, 116, 3, 2},
{93, 166, 4, 2},
{110, 206, 5, 2},
{174, 174, 7, 2},
{82, 109, 3, 3},
{117, 161, 4, 3},
{112, 208, 5, 3},
{141, 202, 5, 4}
};
static struct pll_config vx855_pll_config[] = {
{86, 4, 1},
{108, 5, 1},
{110, 5, 1},
{113, 5, 1},
{121, 5, 1},
{131, 5, 1},
{135, 5, 1},
{142, 5, 1},
{143, 5, 1},
{153, 5, 1},
{164, 5, 1},
{187, 5, 1},
{208, 5, 1},
{110, 5, 2},
{112, 5, 2},
{117, 5, 2},
{118, 5, 2},
{124, 5, 2},
{132, 5, 2},
{137, 5, 2},
{141, 5, 2},
{149, 5, 2},
{151, 5, 2},
{159, 5, 2},
{166, 5, 2},
{167, 5, 2},
{172, 5, 2},
{189, 5, 2},
{191, 5, 2},
{194, 5, 2},
{206, 5, 2},
{208, 5, 2},
{83, 3, 3},
{88, 3, 3},
{109, 3, 3},
{112, 3, 3},
{103, 4, 3},
{105, 4, 3},
{161, 4, 3},
{112, 5, 3},
{115, 5, 3},
{121, 5, 3},
{127, 5, 3},
{134, 5, 3},
{137, 5, 3},
{148, 5, 3},
{157, 5, 3},
{169, 5, 3},
{172, 5, 3},
{182, 5, 3},
{191, 5, 3},
{195, 5, 3},
{209, 5, 3},
{142, 4, 4},
{146, 4, 4},
{161, 4, 4},
{141, 5, 4},
{150, 5, 4},
{165, 5, 4},
{176, 5, 4}
static struct pll_limit vx855_pll_limits[] = {
{86, 86, 4, 1},
{108, 208, 5, 1},
{110, 208, 5, 2},
{83, 112, 3, 3},
{103, 161, 4, 3},
{112, 209, 5, 3},
{142, 161, 4, 4},
{141, 176, 5, 4}
};
/* according to VIA Technologies these values are based on experiment */
......@@ -713,6 +522,9 @@ static struct via_device_mapping device_mapping[] = {
{VIA_LVDS2, "LVDS2"}
};
/* structure with function pointers to support clock control */
static struct via_clock clock;
static void load_fix_bit_crtc_reg(void);
static void __devinit init_gfx_chip_info(int chip_type);
static void __devinit init_tmds_chip_info(void);
......@@ -1634,69 +1446,54 @@ void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active)
}
static u32 cle266_encode_pll(struct pll_config pll)
{
return (pll.multiplier << 8)
| (pll.rshift << 6)
| pll.divisor;
}
static u32 k800_encode_pll(struct pll_config pll)
{
return ((pll.divisor - 2) << 16)
| (pll.rshift << 10)
| (pll.multiplier - 2);
}
static u32 vx855_encode_pll(struct pll_config pll)
{
return (pll.divisor << 16)
| (pll.rshift << 10)
| pll.multiplier;
}
static inline u32 get_pll_internal_frequency(u32 ref_freq,
struct pll_config pll)
{
return ref_freq / pll.divisor * pll.multiplier;
}
static inline u32 get_pll_output_frequency(u32 ref_freq, struct pll_config pll)
{
return get_pll_internal_frequency(ref_freq, pll)>>pll.rshift;
}
static struct pll_config get_pll_config(struct pll_config *config, int size,
static struct via_pll_config get_pll_config(struct pll_limit *limits, int size,
int clk)
{
struct pll_config best = config[0];
struct via_pll_config cur, up, down, best = {0, 1, 0};
const u32 f0 = 14318180; /* X1 frequency */
int i;
for (i = 1; i < size; i++) {
if (abs(get_pll_output_frequency(f0, config[i]) - clk)
< abs(get_pll_output_frequency(f0, best) - clk))
best = config[i];
int i, f;
for (i = 0; i < size; i++) {
cur.rshift = limits[i].rshift;
cur.divisor = limits[i].divisor;
cur.multiplier = clk / ((f0 / cur.divisor)>>cur.rshift);
f = abs(get_pll_output_frequency(f0, cur) - clk);
up = down = cur;
up.multiplier++;
down.multiplier--;
if (abs(get_pll_output_frequency(f0, up) - clk) < f)
cur = up;
else if (abs(get_pll_output_frequency(f0, down) - clk) < f)
cur = down;
if (cur.multiplier < limits[i].multiplier_min)
cur.multiplier = limits[i].multiplier_min;
else if (cur.multiplier > limits[i].multiplier_max)
cur.multiplier = limits[i].multiplier_max;
f = abs(get_pll_output_frequency(f0, cur) - clk);
if (f < abs(get_pll_output_frequency(f0, best) - clk))
best = cur;
}
return best;
}
u32 viafb_get_clk_value(int clk)
static struct via_pll_config get_best_pll_config(int clk)
{
u32 value = 0;
struct via_pll_config config;
switch (viaparinfo->chip_info->gfx_chip_name) {
case UNICHROME_CLE266:
case UNICHROME_K400:
value = cle266_encode_pll(get_pll_config(cle266_pll_config,
ARRAY_SIZE(cle266_pll_config), clk));
config = get_pll_config(cle266_pll_limits,
ARRAY_SIZE(cle266_pll_limits), clk);
break;
case UNICHROME_K800:
case UNICHROME_PM800:
case UNICHROME_CN700:
value = k800_encode_pll(get_pll_config(k800_pll_config,
ARRAY_SIZE(k800_pll_config), clk));
config = get_pll_config(k800_pll_limits,
ARRAY_SIZE(k800_pll_limits), clk);
break;
case UNICHROME_CX700:
case UNICHROME_CN750:
......@@ -1704,92 +1501,28 @@ u32 viafb_get_clk_value(int clk)
case UNICHROME_P4M890:
case UNICHROME_P4M900:
case UNICHROME_VX800:
value = k800_encode_pll(get_pll_config(cx700_pll_config,
ARRAY_SIZE(cx700_pll_config), clk));
config = get_pll_config(cx700_pll_limits,
ARRAY_SIZE(cx700_pll_limits), clk);
break;
case UNICHROME_VX855:
case UNICHROME_VX900:
value = vx855_encode_pll(get_pll_config(vx855_pll_config,
ARRAY_SIZE(vx855_pll_config), clk));
config = get_pll_config(vx855_pll_limits,
ARRAY_SIZE(vx855_pll_limits), clk);
break;
}
return value;
return config;
}
/* Set VCLK*/
void viafb_set_vclock(u32 clk, int set_iga)
{
/* H.W. Reset : ON */
viafb_write_reg_mask(CR17, VIACR, 0x00, BIT7);
if (set_iga == IGA1) {
/* Change D,N FOR VCLK */
switch (viaparinfo->chip_info->gfx_chip_name) {
case UNICHROME_CLE266:
case UNICHROME_K400:
via_write_reg(VIASR, SR46, (clk & 0x00FF));
via_write_reg(VIASR, SR47, (clk & 0xFF00) >> 8);
break;
case UNICHROME_K800:
case UNICHROME_PM800:
case UNICHROME_CN700:
case UNICHROME_CX700:
case UNICHROME_CN750:
case UNICHROME_K8M890:
case UNICHROME_P4M890:
case UNICHROME_P4M900:
case UNICHROME_VX800:
case UNICHROME_VX855:
case UNICHROME_VX900:
via_write_reg(VIASR, SR44, (clk & 0x0000FF));
via_write_reg(VIASR, SR45, (clk & 0x00FF00) >> 8);
via_write_reg(VIASR, SR46, (clk & 0xFF0000) >> 16);
break;
}
}
if (set_iga == IGA2) {
/* Change D,N FOR LCK */
switch (viaparinfo->chip_info->gfx_chip_name) {
case UNICHROME_CLE266:
case UNICHROME_K400:
via_write_reg(VIASR, SR44, (clk & 0x00FF));
via_write_reg(VIASR, SR45, (clk & 0xFF00) >> 8);
break;
case UNICHROME_K800:
case UNICHROME_PM800:
case UNICHROME_CN700:
case UNICHROME_CX700:
case UNICHROME_CN750:
case UNICHROME_K8M890:
case UNICHROME_P4M890:
case UNICHROME_P4M900:
case UNICHROME_VX800:
case UNICHROME_VX855:
case UNICHROME_VX900:
via_write_reg(VIASR, SR4A, (clk & 0x0000FF));
via_write_reg(VIASR, SR4B, (clk & 0x00FF00) >> 8);
via_write_reg(VIASR, SR4C, (clk & 0xFF0000) >> 16);
break;
}
}
struct via_pll_config config = get_best_pll_config(clk);
/* H.W. Reset : OFF */
viafb_write_reg_mask(CR17, VIACR, 0x80, BIT7);
/* Reset PLL */
if (set_iga == IGA1) {
viafb_write_reg_mask(SR40, VIASR, 0x02, BIT1);
viafb_write_reg_mask(SR40, VIASR, 0x00, BIT1);
}
if (set_iga == IGA2) {
viafb_write_reg_mask(SR40, VIASR, 0x04, BIT2);
viafb_write_reg_mask(SR40, VIASR, 0x00, BIT2);
}
if (set_iga == IGA1)
clock.set_primary_pll(config);
if (set_iga == IGA2)
clock.set_secondary_pll(config);
/* Fire! */
via_write_misc_reg_mask(0x0C, 0x0C); /* select external clock */
......@@ -2035,7 +1768,7 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
int i;
int index = 0;
int h_addr, v_addr;
u32 pll_D_N, clock, refresh = viafb_refresh;
u32 clock, refresh = viafb_refresh;
if (viafb_SAMM_ON && set_iga == IGA2)
refresh = viafb_refresh1;
......@@ -2089,14 +1822,13 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
clock = crt_reg.hor_total * crt_reg.ver_total
* crt_table[index].refresh_rate;
pll_D_N = viafb_get_clk_value(clock);
DEBUG_MSG(KERN_INFO "PLL=%x", pll_D_N);
viafb_set_vclock(pll_D_N, set_iga);
viafb_set_vclock(clock, set_iga);
}
void __devinit viafb_init_chip_info(int chip_type)
{
via_clock_init(&clock, chip_type);
init_gfx_chip_info(chip_type);
init_tmds_chip_info();
init_lvds_chip_info();
......@@ -2584,6 +2316,33 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
get_sync(viafbinfo1));
}
clock.set_engine_pll_state(VIA_STATE_ON);
clock.set_primary_clock_source(VIA_CLKSRC_X1, true);
clock.set_secondary_clock_source(VIA_CLKSRC_X1, true);
#ifdef CONFIG_FB_VIA_X_COMPATIBILITY
clock.set_primary_pll_state(VIA_STATE_ON);
clock.set_primary_clock_state(VIA_STATE_ON);
clock.set_secondary_pll_state(VIA_STATE_ON);
clock.set_secondary_clock_state(VIA_STATE_ON);
#else
if (viaparinfo->shared->iga1_devices) {
clock.set_primary_pll_state(VIA_STATE_ON);
clock.set_primary_clock_state(VIA_STATE_ON);
} else {
clock.set_primary_pll_state(VIA_STATE_OFF);
clock.set_primary_clock_state(VIA_STATE_OFF);
}
if (viaparinfo->shared->iga2_devices) {
clock.set_secondary_pll_state(VIA_STATE_ON);
clock.set_secondary_clock_state(VIA_STATE_ON);
} else {
clock.set_secondary_pll_state(VIA_STATE_OFF);
clock.set_secondary_clock_state(VIA_STATE_OFF);
}
#endif /*CONFIG_FB_VIA_X_COMPATIBILITY*/
via_set_state(devices, VIA_STATE_ON);
device_screen_on();
return 1;
......
drivers/video/via/hw.h
View file @ f33f6f0c
......@@ -732,20 +732,13 @@ struct _lcd_scaling_factor {
struct _lcd_ver_scaling_factor lcd_ver_scaling_factor;
};
struct pll_config {
u16 multiplier;
struct pll_limit {
u16 multiplier_min;
u16 multiplier_max;
u8 divisor;
u8 rshift;
};
struct pll_map {
u32 clk;
struct pll_config cle266_pll;
struct pll_config k800_pll;
struct pll_config cx700_pll;
struct pll_config vx855_pll;
};
struct rgbLUT {
u8 red;
u8 green;
......@@ -935,7 +928,6 @@ void viafb_lock_crt(void);
void viafb_unlock_crt(void);
void viafb_load_fetch_count_reg(int h_addr, int bpp_byte, int set_iga);
void viafb_write_regx(struct io_reg RegTable[], int ItemNum);
u32 viafb_get_clk_value(int clk);
void viafb_load_FIFO_reg(int set_iga, int hor_active, int ver_active);
void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
*p_gfx_dpa_setting);
......
drivers/video/via/lcd.c
View file @ f33f6f0c
......@@ -558,7 +558,7 @@ void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table,
int set_vres = plvds_setting_info->v_active;
int panel_hres = plvds_setting_info->lcd_panel_hres;
int panel_vres = plvds_setting_info->lcd_panel_vres;
u32 pll_D_N, clock;
u32 clock;
struct display_timing mode_crt_reg, panel_crt_reg;
struct crt_mode_table *panel_crt_table = NULL;
struct VideoModeTable *vmode_tbl = viafb_get_mode(panel_hres,
......@@ -609,10 +609,7 @@ void viafb_lcd_set_mode(struct crt_mode_table *mode_crt_table,
viafb_load_FIFO_reg(set_iga, set_hres, set_vres);
fill_lcd_format();
pll_D_N = viafb_get_clk_value(clock);
DEBUG_MSG(KERN_INFO "PLL=0x%x", pll_D_N);
viafb_set_vclock(pll_D_N, set_iga);
viafb_set_vclock(clock, set_iga);
lcd_patch_skew(plvds_setting_info, plvds_chip_info);
/* If K8M800, enable LCD Prefetch Mode. */
......
drivers/video/via/via_clock.c 0 → 100644
View file @ f33f6f0c
/*
* Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
* Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
* Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public
* License as published by the Free Software Foundation;
* either version 2, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
* the implied warranty of MERCHANTABILITY or FITNESS FOR
* A PARTICULAR PURPOSE.See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
* clock and PLL management functions
*/
#include <linux/kernel.h>
#include <linux/via-core.h>
#include "via_clock.h"
#include "global.h"
#include "debug.h"
const char *via_slap = "Please slap VIA Technologies to motivate them "
"releasing full documentation for your platform!\n";
static inline u32 cle266_encode_pll(struct via_pll_config pll)
{
return (pll.multiplier << 8)
| (pll.rshift << 6)
| pll.divisor;
}
static inline u32 k800_encode_pll(struct via_pll_config pll)
{
return ((pll.divisor - 2) << 16)
| (pll.rshift << 10)
| (pll.multiplier - 2);
}
static inline u32 vx855_encode_pll(struct via_pll_config pll)
{
return (pll.divisor << 16)
| (pll.rshift << 10)
| pll.multiplier;
}
static inline void cle266_set_primary_pll_encoded(u32 data)
{
via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */
via_write_reg(VIASR, 0x46, data & 0xFF);
via_write_reg(VIASR, 0x47, (data >> 8) & 0xFF);
via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */
}
static inline void k800_set_primary_pll_encoded(u32 data)
{
via_write_reg_mask(VIASR, 0x40, 0x02, 0x02); /* enable reset */
via_write_reg(VIASR, 0x44, data & 0xFF);
via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF);
via_write_reg(VIASR, 0x46, (data >> 16) & 0xFF);
via_write_reg_mask(VIASR, 0x40, 0x00, 0x02); /* disable reset */
}
static inline void cle266_set_secondary_pll_encoded(u32 data)
{
via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */
via_write_reg(VIASR, 0x44, data & 0xFF);
via_write_reg(VIASR, 0x45, (data >> 8) & 0xFF);
via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */
}
static inline void k800_set_secondary_pll_encoded(u32 data)
{
via_write_reg_mask(VIASR, 0x40, 0x04, 0x04); /* enable reset */
via_write_reg(VIASR, 0x4A, data & 0xFF);
via_write_reg(VIASR, 0x4B, (data >> 8) & 0xFF);
via_write_reg(VIASR, 0x4C, (data >> 16) & 0xFF);
via_write_reg_mask(VIASR, 0x40, 0x00, 0x04); /* disable reset */
}
static inline void set_engine_pll_encoded(u32 data)
{
via_write_reg_mask(VIASR, 0x40, 0x01, 0x01); /* enable reset */
via_write_reg(VIASR, 0x47, data & 0xFF);
via_write_reg(VIASR, 0x48, (data >> 8) & 0xFF);
via_write_reg(VIASR, 0x49, (data >> 16) & 0xFF);
via_write_reg_mask(VIASR, 0x40, 0x00, 0x01); /* disable reset */
}
static void cle266_set_primary_pll(struct via_pll_config config)
{
cle266_set_primary_pll_encoded(cle266_encode_pll(config));
}
static void k800_set_primary_pll(struct via_pll_config config)
{
k800_set_primary_pll_encoded(k800_encode_pll(config));
}
static void vx855_set_primary_pll(struct via_pll_config config)
{
k800_set_primary_pll_encoded(vx855_encode_pll(config));
}
static void cle266_set_secondary_pll(struct via_pll_config config)
{
cle266_set_secondary_pll_encoded(cle266_encode_pll(config));
}
static void k800_set_secondary_pll(struct via_pll_config config)
{
k800_set_secondary_pll_encoded(k800_encode_pll(config));
}
static void vx855_set_secondary_pll(struct via_pll_config config)
{
k800_set_secondary_pll_encoded(vx855_encode_pll(config));
}
static void k800_set_engine_pll(struct via_pll_config config)
{
set_engine_pll_encoded(k800_encode_pll(config));
}
static void vx855_set_engine_pll(struct via_pll_config config)
{
set_engine_pll_encoded(vx855_encode_pll(config));
}
static void set_primary_pll_state(u8 state)
{
u8 value;
switch (state) {
case VIA_STATE_ON:
value = 0x20;
break;
case VIA_STATE_OFF:
value = 0x00;
break;
default:
return;
}
via_write_reg_mask(VIASR, 0x2D, value, 0x30);
}
static void set_secondary_pll_state(u8 state)
{
u8 value;
switch (state) {
case VIA_STATE_ON:
value = 0x08;
break;
case VIA_STATE_OFF:
value = 0x00;
break;
default:
return;
}
via_write_reg_mask(VIASR, 0x2D, value, 0x0C);
}
static void set_engine_pll_state(u8 state)
{
u8 value;
switch (state) {
case VIA_STATE_ON:
value = 0x02;
break;
case VIA_STATE_OFF:
value = 0x00;
break;
default:
return;
}
via_write_reg_mask(VIASR, 0x2D, value, 0x03);
}
static void set_primary_clock_state(u8 state)
{
u8 value;
switch (state) {
case VIA_STATE_ON:
value = 0x20;
break;
case VIA_STATE_OFF:
value = 0x00;
break;
default:
return;
}
via_write_reg_mask(VIASR, 0x1B, value, 0x30);
}
static void set_secondary_clock_state(u8 state)
{
u8 value;
switch (state) {
case VIA_STATE_ON:
value = 0x80;
break;
case VIA_STATE_OFF:
value = 0x00;
break;
default:
return;
}
via_write_reg_mask(VIASR, 0x1B, value, 0xC0);
}
static inline u8 set_clock_source_common(enum via_clksrc source, bool use_pll)
{
u8 data = 0;
switch (source) {
case VIA_CLKSRC_X1:
data = 0x00;
break;
case VIA_CLKSRC_TVX1:
data = 0x02;
break;
case VIA_CLKSRC_TVPLL:
data = 0x04; /* 0x06 should be the same */
break;
case VIA_CLKSRC_DVP1TVCLKR:
data = 0x0A;
break;
case VIA_CLKSRC_CAP0:
data = 0xC;
break;
case VIA_CLKSRC_CAP1:
data = 0x0E;
break;
}
if (!use_pll)
data |= 1;
return data;
}
static void set_primary_clock_source(enum via_clksrc source, bool use_pll)
{
u8 data = set_clock_source_common(source, use_pll) << 4;
via_write_reg_mask(VIACR, 0x6C, data, 0xF0);
}
static void set_secondary_clock_source(enum via_clksrc source, bool use_pll)
{
u8 data = set_clock_source_common(source, use_pll);
via_write_reg_mask(VIACR, 0x6C, data, 0x0F);
}
static void dummy_set_clock_state(u8 state)
{
printk(KERN_INFO "Using undocumented set clock state.\n%s", via_slap);
}
static void dummy_set_clock_source(enum via_clksrc source, bool use_pll)
{
printk(KERN_INFO "Using undocumented set clock source.\n%s", via_slap);
}
static void dummy_set_pll_state(u8 state)
{
printk(KERN_INFO "Using undocumented set PLL state.\n%s", via_slap);
}
static void dummy_set_pll(struct via_pll_config config)
{
printk(KERN_INFO "Using undocumented set PLL.\n%s", via_slap);
}
void via_clock_init(struct via_clock *clock, int gfx_chip)
{
switch (gfx_chip) {
case UNICHROME_CLE266:
case UNICHROME_K400:
clock->set_primary_clock_state = dummy_set_clock_state;
clock->set_primary_clock_source = dummy_set_clock_source;
clock->set_primary_pll_state = dummy_set_pll_state;
clock->set_primary_pll = cle266_set_primary_pll;
clock->set_secondary_clock_state = dummy_set_clock_state;
clock->set_secondary_clock_source = dummy_set_clock_source;
clock->set_secondary_pll_state = dummy_set_pll_state;
clock->set_secondary_pll = cle266_set_secondary_pll;
clock->set_engine_pll_state = dummy_set_pll_state;
clock->set_engine_pll = dummy_set_pll;
break;
case UNICHROME_K800:
case UNICHROME_PM800:
case UNICHROME_CN700:
case UNICHROME_CX700:
case UNICHROME_CN750:
case UNICHROME_K8M890:
case UNICHROME_P4M890:
case UNICHROME_P4M900:
case UNICHROME_VX800:
clock->set_primary_clock_state = set_primary_clock_state;
clock->set_primary_clock_source = set_primary_clock_source;
clock->set_primary_pll_state = set_primary_pll_state;
clock->set_primary_pll = k800_set_primary_pll;
clock->set_secondary_clock_state = set_secondary_clock_state;
clock->set_secondary_clock_source = set_secondary_clock_source;
clock->set_secondary_pll_state = set_secondary_pll_state;
clock->set_secondary_pll = k800_set_secondary_pll;
clock->set_engine_pll_state = set_engine_pll_state;
clock->set_engine_pll = k800_set_engine_pll;
break;
case UNICHROME_VX855:
case UNICHROME_VX900:
clock->set_primary_clock_state = set_primary_clock_state;
clock->set_primary_clock_source = set_primary_clock_source;
clock->set_primary_pll_state = set_primary_pll_state;
clock->set_primary_pll = vx855_set_primary_pll;
clock->set_secondary_clock_state = set_secondary_clock_state;
clock->set_secondary_clock_source = set_secondary_clock_source;
clock->set_secondary_pll_state = set_secondary_pll_state;
clock->set_secondary_pll = vx855_set_secondary_pll;
clock->set_engine_pll_state = set_engine_pll_state;
clock->set_engine_pll = vx855_set_engine_pll;
break;
}
}
drivers/video/via/via_clock.h 0 → 100644
View file @ f33f6f0c
/*
* Copyright 1998-2008 VIA Technologies, Inc. All Rights Reserved.
* Copyright 2001-2008 S3 Graphics, Inc. All Rights Reserved.
* Copyright 2011 Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public
* License as published by the Free Software Foundation;
* either version 2, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTIES OR REPRESENTATIONS; without even
* the implied warranty of MERCHANTABILITY or FITNESS FOR
* A PARTICULAR PURPOSE.See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
/*
* clock and PLL management functions
*/
#ifndef __VIA_CLOCK_H__
#define __VIA_CLOCK_H__
#include <linux/types.h>
enum via_clksrc {
VIA_CLKSRC_X1 = 0,
VIA_CLKSRC_TVX1,
VIA_CLKSRC_TVPLL,
VIA_CLKSRC_DVP1TVCLKR,
VIA_CLKSRC_CAP0,
VIA_CLKSRC_CAP1,
};
struct via_pll_config {
u16 multiplier;
u8 divisor;
u8 rshift;
};
struct via_clock {
void (*set_primary_clock_state)(u8 state);
void (*set_primary_clock_source)(enum via_clksrc src, bool use_pll);
void (*set_primary_pll_state)(u8 state);
void (*set_primary_pll)(struct via_pll_config config);
void (*set_secondary_clock_state)(u8 state);
void (*set_secondary_clock_source)(enum via_clksrc src, bool use_pll);
void (*set_secondary_pll_state)(u8 state);
void (*set_secondary_pll)(struct via_pll_config config);
void (*set_engine_pll_state)(u8 state);
void (*set_engine_pll)(struct via_pll_config config);
};
static inline u32 get_pll_internal_frequency(u32 ref_freq,
struct via_pll_config pll)
{
return ref_freq / pll.divisor * pll.multiplier;
}
static inline u32 get_pll_output_frequency(u32 ref_freq,
struct via_pll_config pll)
{
return get_pll_internal_frequency(ref_freq, pll) >> pll.rshift;
}
void via_clock_init(struct via_clock *clock, int gfx_chip);
#endif /* __VIA_CLOCK_H__ */
drivers/video/via/viamode.c
View file @ f33f6f0c
......@@ -37,7 +37,6 @@ struct io_reg CN400_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01},
{VIACR, CR69, 0xFF, 0x00},
{VIACR, CR6A, 0xFF, 0x40},
{VIACR, CR6B, 0xFF, 0x00},
{VIACR, CR6C, 0xFF, 0x00},
{VIACR, CR88, 0xFF, 0x40}, /* LCD Panel Type */
{VIACR, CR89, 0xFF, 0x00}, /* LCD Timing Control 0 */
{VIACR, CR8A, 0xFF, 0x88}, /* LCD Timing Control 1 */
......@@ -83,7 +82,6 @@ struct io_reg CN700_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01},
{VIACR, CR69, 0xFF, 0x00},
{VIACR, CR6A, 0xFD, 0x40},
{VIACR, CR6B, 0xFF, 0x00},
{VIACR, CR6C, 0xFF, 0x00},
{VIACR, CR77, 0xFF, 0x00}, /* LCD scaling Factor */
{VIACR, CR78, 0xFF, 0x00}, /* LCD scaling Factor */
{VIACR, CR79, 0xFF, 0x00}, /* LCD scaling Factor */
......@@ -153,7 +151,7 @@ struct io_reg CX700_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01},
{VIASR, SR1B, 0xFF, 0xF0},
{VIASR, SR1E, 0xFF, 0x01},
{VIASR, SR2A, 0xFF, 0x00},
{VIASR, SR2D, 0xFF, 0xFF}, /* VCK and LCK PLL power on. */
{VIASR, SR2D, 0xC0, 0xC0}, /* delayed E3_ECK */
{VIACR, CR32, 0xFF, 0x00},
{VIACR, CR33, 0xFF, 0x00},
{VIACR, CR35, 0xFF, 0x00},
......@@ -162,7 +160,6 @@ struct io_reg CX700_ModeXregs[] = { {VIASR, SR10, 0xFF, 0x01},
{VIACR, CR69, 0xFF, 0x00},
{VIACR, CR6A, 0xFF, 0x40},
{VIACR, CR6B, 0xFF, 0x00},
{VIACR, CR6C, 0xFF, 0x00},
{VIACR, CR88, 0xFF, 0x40}, /* LCD Panel Type */
{VIACR, CR89, 0xFF, 0x00}, /* LCD Timing Control 0 */
{VIACR, CR8A, 0xFF, 0x88}, /* LCD Timing Control 1 */
......@@ -192,7 +189,7 @@ struct io_reg VX855_ModeXregs[] = {
{VIASR, SR2A, 0xF0, 0x00},
{VIASR, SR58, 0xFF, 0x00},
{VIASR, SR59, 0xFF, 0x00},
{VIASR, SR2D, 0xFF, 0xFF}, /* VCK and LCK PLL power on. */
{VIASR, SR2D, 0xC0, 0xC0}, /* delayed E3_ECK */
{VIACR, CR32, 0xFF, 0x00},
{VIACR, CR33, 0x7F, 0x00},
{VIACR, CR35, 0xFF, 0x00},
......@@ -200,7 +197,6 @@ struct io_reg VX855_ModeXregs[] = {
{VIACR, CR69, 0xFF, 0x00},
{VIACR, CR6A, 0xFD, 0x60},
{VIACR, CR6B, 0xFF, 0x00},
{VIACR, CR6C, 0xFF, 0x00},
{VIACR, CR88, 0xFF, 0x40}, /* LCD Panel Type */
{VIACR, CR89, 0xFF, 0x00}, /* LCD Timing Control 0 */
{VIACR, CR8A, 0xFF, 0x88}, /* LCD Timing Control 1 */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7