V4L/DVB (5474): SN9C1xx driver updates

@ Don't assume that SOF headers can't cross packets boundaries
@ Fix compression quality selection
+ Add support for MI-0360 image sensor
* Documentation updates
@ Fix sysfs
@ MI0343 rewritten
* HV7131R color fixes and add new ABLC control
* Rename the archive from "sn9c102" to "sn9c1xx"
* fix typos
* better support for TAS5110D
@ fix OV7630 wrong colors
@ Don't return an error if no input buffers are enqueued yet on VIDIOC_STREAMON
* Add informations about colorspaces
* More appropriate error codes in case of failure of some system calls
* More precise hardware detection
* Add more informations about supported hardware in the documentation
+ More supported devices
+ Add support for HV7131R image sensor
Signed-off-by: Luca Risolia <luca.risolia@studio.unibo.it>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>

Documentation/video4linux/sn9c102.txt

@@ -25,7 +25,7 @@ Index
 
 1. Copyright
 ============
-Copyright (C) 2004-2006 by Luca Risolia <luca.risolia@studio.unibo.it>
+Copyright (C) 2004-2007 by Luca Risolia <luca.risolia@studio.unibo.it>
 
 
 2. Disclaimer
@@ -216,10 +216,10 @@ Description:    Debugging information level, from 0 to 3:
 		1 = critical errors
 		2 = significant informations
 		3 = more verbose messages
-		Level 3 is useful for testing only, when only one device
-		is used. It also shows some more informations about the
-		hardware being detected. This parameter can be changed at
-		runtime thanks to the /sys filesystem interface.
+		Level 3 is useful for testing only. It also shows some more
+		informations about the hardware being detected.
+		This parameter can be changed at runtime thanks to the /sys
+		filesystem interface.
 Default:        2
 -------------------------------------------------------------------------------
 
@@ -235,7 +235,7 @@ created in the /sys/class/video4linux/videoX directory. You can set the green
 channel's gain by writing the desired value to it. The value may range from 0
 to 15 for the SN9C101 or SN9C102 bridges, from 0 to 127 for the SN9C103,
 SN9C105 and SN9C120 bridges.
-Similarly, only for the SN9C103, SN9C105 and SN9120 controllers, blue and red
+Similarly, only for the SN9C103, SN9C105 and SN9C120 controllers, blue and red
 gain control files are available in the same directory, for which accepted
 values may range from 0 to 127.
 
@@ -402,38 +402,49 @@ Vendor ID  Product ID
 0x0c45     0x60bc
 0x0c45     0x60be
 0x0c45     0x60c0
+0x0c45     0x60c2
 0x0c45     0x60c8
 0x0c45     0x60cc
 0x0c45     0x60ea
 0x0c45     0x60ec
+0x0c45     0x60ef
 0x0c45     0x60fa
 0x0c45     0x60fb
 0x0c45     0x60fc
 0x0c45     0x60fe
+0x0c45     0x6102
+0x0c45     0x6108
+0x0c45     0x610f
 0x0c45     0x6130
+0x0c45     0x6138
 0x0c45     0x613a
 0x0c45     0x613b
 0x0c45     0x613c
 0x0c45     0x613e
 
 The list above does not imply that all those devices work with this driver: up
-until now only the ones that assemble the following image sensors are
-supported; kernel messages will always tell you whether this is the case (see
-"Module loading" paragraph):
-
-Model       Manufacturer
------       ------------
-HV7131D     Hynix Semiconductor, Inc.
-MI-0343     Micron Technology, Inc.
-OV7630      OmniVision Technologies, Inc.
-OV7660      OmniVision Technologies, Inc.
-PAS106B     PixArt Imaging, Inc.
-PAS202BCA   PixArt Imaging, Inc.
-PAS202BCB   PixArt Imaging, Inc.
-TAS5110C1B  Taiwan Advanced Sensor Corporation
-TAS5130D1B  Taiwan Advanced Sensor Corporation
-
-Some of the available control settings of each image sensor are supported
+until now only the ones that assemble the following pairs of SN9C1xx bridges
+and image sensors are supported; kernel messages will always tell you whether
+this is the case (see "Module loading" paragraph):
+
+Image sensor / SN9C1xx bridge      | SN9C10[12]  SN9C103  SN9C105  SN9C120
+-------------------------------------------------------------------------------
+HV7131D    Hynix Semiconductor     | Yes         No       No       No
+HV7131R    Hynix Semiconductor     | No          Yes      Yes      Yes
+MI-0343    Micron Technology       | Yes         No       No       No
+MI-0360    Micron Technology       | No          Yes      No       No
+OV7630     OmniVision Technologies | Yes         Yes      No       No
+OV7660     OmniVision Technologies | No          No       Yes      Yes
+PAS106B    PixArt Imaging          | Yes         No       No       No
+PAS202B    PixArt Imaging          | Yes         Yes      No       No
+TAS5110C1B Taiwan Advanced Sensor  | Yes         No       No       No
+TAS5110D   Taiwan Advanced Sensor  | Yes         No       No       No
+TAS5130D1B Taiwan Advanced Sensor  | Yes         No       No       No
+
+"Yes" means that the pair is supported by the driver, while "No" means that the
+pair does not exist or is not supported by the driver.
+
+Only some of the available control settings of each image sensor are supported
 through the V4L2 interface.
 
 Donations of new models for further testing and support would be much
@@ -482,8 +493,8 @@ The SN9C1xx PC Camera Controllers can send images in two possible video
 formats over the USB: either native "Sequential RGB Bayer" or compressed.
 The compression is used to achieve high frame rates. With regard to the
 SN9C101, SN9C102 and SN9C103, the compression is based on the Huffman encoding
-algorithm described below, while the SN9C105 and SN9C120 the compression is
-based on the JPEG standard.
+algorithm described below, while with regard to the SN9C105 and SN9C120 the
+compression is based on the JPEG standard.
 The current video format may be selected or queried from the user application
 by calling the VIDIOC_S_FMT or VIDIOC_G_FMT ioctl's, as described in the V4L2
 API specifications.
@@ -573,4 +584,5 @@ order):
 - Mizuno Takafumi for the donation of a webcam;
 - an "anonymous" donator (who didn't want his name to be revealed) for the
   donation of a webcam.
-- an anonymous donator for the donation of four webcams.
+- an anonymous donator for the donation of four webcams and two boards with ten
+  image sensors.

MAINTAINERS

@@ -3606,7 +3606,7 @@ L:	linux-usb-devel@lists.sourceforge.net
 W:	http://www.connecttech.com
 S:	Supported
 
-USB SN9C10x DRIVER
+USB SN9C1xx DRIVER
 P:	Luca Risolia
 M:	luca.risolia@studio.unibo.it
 L:	linux-usb-devel@lists.sourceforge.net

drivers/media/video/sn9c102/Makefile

-sn9c102-objs    := sn9c102_core.o sn9c102_hv7131d.o sn9c102_mi0343.o \
-		   sn9c102_ov7630.o sn9c102_ov7660.o sn9c102_pas106b.o \
-		   sn9c102_pas202bcb.o sn9c102_tas5110c1b.o \
+sn9c102-objs := sn9c102_core.o \
+		sn9c102_hv7131d.o \
+		sn9c102_hv7131r.o \
+		sn9c102_mi0343.o \
+		sn9c102_mi0360.o \
+		sn9c102_ov7630.o \
+		sn9c102_ov7660.o \
+		sn9c102_pas106b.o \
+		sn9c102_pas202bcb.o \
+		sn9c102_tas5110c1b.o \
+		sn9c102_tas5110d.o \
 		sn9c102_tas5130d1b.o
 
 obj-$(CONFIG_USB_SN9C102)       += sn9c102.o
-

drivers/media/video/sn9c102/sn9c102.h

@@ -78,8 +78,13 @@ enum sn9c102_stream_state {
 
 typedef char sn9c102_sof_header_t[62];
 
+struct sn9c102_sof_t {
+	sn9c102_sof_header_t header;
+	u16 bytesread;
+};
+
 struct sn9c102_sysfs_attr {
-	u8 reg, i2c_reg;
+	u16 reg, i2c_reg;
 	sn9c102_sof_header_t frame_header;
 };
 
@@ -112,7 +117,7 @@ struct sn9c102_device {
 	struct v4l2_jpegcompression compression;
 
 	struct sn9c102_sysfs_attr sysfs;
-	sn9c102_sof_header_t sof_header;
+	struct sn9c102_sof_t sof;
 	u16 reg[384];
 
 	struct sn9c102_module_param module_param;
@@ -182,8 +187,8 @@ do {                                                                          \
 		if ((level) == 1 || (level) == 2)                             \
 			pr_info("sn9c102: " fmt "\n", ## args);               \
 		else if ((level) == 3)                                        \
-			pr_debug("sn9c102: [%s:%d] " fmt "\n", __FUNCTION__,  \
-				 __LINE__ , ## args);                         \
+			pr_debug("sn9c102: [%s:%d] " fmt "\n",                \
+				 __FUNCTION__, __LINE__ , ## args);           \
 	}                                                                     \
 } while (0)
 #else
@@ -194,8 +199,8 @@ do {                                                                          \
 
 #undef PDBG
 #define PDBG(fmt, args...)                                                    \
-dev_info(&cam->usbdev->dev, "[%s:%d] " fmt "\n",                              \
-	 __FUNCTION__, __LINE__ , ## args)
+dev_info(&cam->usbdev->dev, "[%s:%s:%d] " fmt "\n", __FILE__, __FUNCTION__,   \
+	 __LINE__ , ## args)
 
 #undef PDBGG
 #define PDBGG(fmt, args...) do {;} while(0) /* placeholder */

drivers/media/video/sn9c102/sn9c102_devtable.h

@@ -89,16 +89,22 @@ static const struct usb_device_id sn9c102_id_table[] = {
 	{ SN9C102_USB_DEVICE(0x0471, 0x0327, BRIDGE_SN9C105), },
 	{ SN9C102_USB_DEVICE(0x0471, 0x0328, BRIDGE_SN9C105), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60c0, BRIDGE_SN9C105), },
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60c2, BRIDGE_SN9C105), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60c8, BRIDGE_SN9C105), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60cc, BRIDGE_SN9C105), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60ea, BRIDGE_SN9C105), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60ec, BRIDGE_SN9C105), },
+	{ SN9C102_USB_DEVICE(0x0c45, 0x60ef, BRIDGE_SN9C105), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60fa, BRIDGE_SN9C105), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60fb, BRIDGE_SN9C105), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60fc, BRIDGE_SN9C105), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x60fe, BRIDGE_SN9C105), },
 	/* SN9C120 */
+	{ SN9C102_USB_DEVICE(0x0c45, 0x6102, BRIDGE_SN9C120), },
+	{ SN9C102_USB_DEVICE(0x0c45, 0x6108, BRIDGE_SN9C120), },
+	{ SN9C102_USB_DEVICE(0x0c45, 0x610f, BRIDGE_SN9C120), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x6130, BRIDGE_SN9C120), },
+	{ SN9C102_USB_DEVICE(0x0c45, 0x6138, BRIDGE_SN9C120), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x613a, BRIDGE_SN9C120), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x613b, BRIDGE_SN9C120), },
 	{ SN9C102_USB_DEVICE(0x0c45, 0x613c, BRIDGE_SN9C120), },
@@ -114,12 +120,15 @@ static const struct usb_device_id sn9c102_id_table[] = {
    Functions must return 0 on success, the appropriate error otherwise.
 */
 extern int sn9c102_probe_hv7131d(struct sn9c102_device* cam);
+extern int sn9c102_probe_hv7131r(struct sn9c102_device* cam);
 extern int sn9c102_probe_mi0343(struct sn9c102_device* cam);
+extern int sn9c102_probe_mi0360(struct sn9c102_device* cam);
 extern int sn9c102_probe_ov7630(struct sn9c102_device* cam);
 extern int sn9c102_probe_ov7660(struct sn9c102_device* cam);
 extern int sn9c102_probe_pas106b(struct sn9c102_device* cam);
 extern int sn9c102_probe_pas202bcb(struct sn9c102_device* cam);
 extern int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam);
+extern int sn9c102_probe_tas5110d(struct sn9c102_device* cam);
 extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam);
 
 /*
@@ -128,13 +137,16 @@ extern int sn9c102_probe_tas5130d1b(struct sn9c102_device* cam);
    the order of the list below, from top to bottom.
 */
 static int (*sn9c102_sensor_table[])(struct sn9c102_device*) = {
+	&sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */
+	&sn9c102_probe_hv7131r, /* strong detection based on SENSOR ids */
 	&sn9c102_probe_mi0343, /* strong detection based on SENSOR ids */
+	&sn9c102_probe_mi0360, /* strong detection based on SENSOR ids */
 	&sn9c102_probe_pas106b, /* strong detection based on SENSOR ids */
 	&sn9c102_probe_pas202bcb, /* strong detection based on SENSOR ids */
-	&sn9c102_probe_hv7131d, /* strong detection based on SENSOR ids */
 	&sn9c102_probe_ov7630, /* strong detection based on SENSOR ids */
 	&sn9c102_probe_ov7660, /* strong detection based on SENSOR ids */
 	&sn9c102_probe_tas5110c1b, /* detection based on USB pid/vid */
+	&sn9c102_probe_tas5110d, /* detection based on USB pid/vid */
 	&sn9c102_probe_tas5130d1b, /* detection based on USB pid/vid */
 	NULL,
 };

drivers/media/video/sn9c102/sn9c102_hv7131d.c

@@ -22,9 +22,6 @@
 #include "sn9c102_sensor.h"
 
 
-static struct sn9c102_sensor hv7131d;
-
-
 static int hv7131d_init(struct sn9c102_device* cam)
 {
 	int err = 0;
@@ -153,7 +150,7 @@ static int hv7131d_set_pix_format(struct sn9c102_device* cam,
 static struct sn9c102_sensor hv7131d = {
 	.name = "HV7131D",
 	.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
-	.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102 | BRIDGE_SN9C103,
+	.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102,
 	.sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
 	.frequency = SN9C102_I2C_100KHZ,
 	.interface = SN9C102_I2C_2WIRES,
@@ -263,7 +260,7 @@ int sn9c102_probe_hv7131d(struct sn9c102_device* cam)
 	if (r0 < 0 || r1 < 0)
 		return -EIO;
 
-	if (r0 != 0x00 && r1 != 0x04)
+	if (r0 != 0x00 || r1 != 0x04)
 		return -ENODEV;
 
 	sn9c102_attach_sensor(cam, &hv7131d);

drivers/media/video/sn9c102/sn9c102_mi0343.c

@@ -22,12 +22,9 @@
 #include "sn9c102_sensor.h"
 
 
-static struct sn9c102_sensor mi0343;
-static u8 mi0343_i2c_data[5+1];
-
-
 static int mi0343_init(struct sn9c102_device* cam)
 {
+	struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
 	int err = 0;
 
 	err += sn9c102_write_reg(cam, 0x00, 0x10);
@@ -38,20 +35,20 @@ static int mi0343_init(struct sn9c102_device* cam)
 	err += sn9c102_write_reg(cam, 0x07, 0x18);
 	err += sn9c102_write_reg(cam, 0xa0, 0x19);
 
-	err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
-					 0x0d, 0x00, 0x01, 0, 0);
-	err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
-					 0x0d, 0x00, 0x00, 0, 0);
-	err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
-					 0x03, 0x01, 0xe1, 0, 0);
-	err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
-					 0x04, 0x02, 0x81, 0, 0);
-	err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
-					 0x05, 0x00, 0x17, 0, 0);
-	err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
-					 0x06, 0x00, 0x11, 0, 0);
-	err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4, mi0343.i2c_slave_id,
-					 0x62, 0x04, 0x9a, 0, 0);
+	err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id, 0x0d,
+					 0x00, 0x01, 0, 0);
+	err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id, 0x0d,
+					 0x00, 0x00, 0, 0);
+	err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id, 0x03,
+					 0x01, 0xe1, 0, 0);
+	err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id, 0x04,
+					 0x02, 0x81, 0, 0);
+	err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id, 0x05,
+					 0x00, 0x17, 0, 0);
+	err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id, 0x06,
+					 0x00, 0x11, 0, 0);
+	err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id, 0x62,
+					 0x04, 0x9a, 0, 0);
 
 	return err;
 }
@@ -60,43 +57,46 @@ static int mi0343_init(struct sn9c102_device* cam)
 static int mi0343_get_ctrl(struct sn9c102_device* cam,
 			   struct v4l2_control* ctrl)
 {
+	struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
+	u8 data[5+1];
+
 	switch (ctrl->id) {
 	case V4L2_CID_EXPOSURE:
-		if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
-					     0x09, 2+1, mi0343_i2c_data) < 0)
+		if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x09,
+					     2+1, data) < 0)
 			return -EIO;
-		ctrl->value = mi0343_i2c_data[2];
+		ctrl->value = data[2];
 		return 0;
 	case V4L2_CID_GAIN:
-		if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
-					     0x35, 2+1, mi0343_i2c_data) < 0)
+		if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x35,
+					     2+1, data) < 0)
 			return -EIO;
 		break;
 	case V4L2_CID_HFLIP:
-		if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
-					     0x20, 2+1, mi0343_i2c_data) < 0)
+		if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x20,
+					     2+1, data) < 0)
 			return -EIO;
-		ctrl->value = mi0343_i2c_data[3] & 0x20 ? 1 : 0;
+		ctrl->value = data[3] & 0x20 ? 1 : 0;
 		return 0;
 	case V4L2_CID_VFLIP:
-		if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
-					     0x20, 2+1, mi0343_i2c_data) < 0)
+		if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x20,
+					     2+1, data) < 0)
 			return -EIO;
-		ctrl->value = mi0343_i2c_data[3] & 0x80 ? 1 : 0;
+		ctrl->value = data[3] & 0x80 ? 1 : 0;
 		return 0;
 	case V4L2_CID_RED_BALANCE:
-		if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
-					     0x2d, 2+1, mi0343_i2c_data) < 0)
+		if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x2d,
+					     2+1, data) < 0)
 			return -EIO;
 		break;
 	case V4L2_CID_BLUE_BALANCE:
-		if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
-					     0x2c, 2+1, mi0343_i2c_data) < 0)
+		if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x2c,
+					     2+1, data) < 0)
 			return -EIO;
 		break;
 	case SN9C102_V4L2_CID_GREEN_BALANCE:
-		if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id,
-					     0x2e, 2+1, mi0343_i2c_data) < 0)
+		if (sn9c102_i2c_try_raw_read(cam, s, s->i2c_slave_id, 0x2e,
+					     2+1, data) < 0)
 			return -EIO;
 		break;
 	default:
@@ -108,7 +108,7 @@ static int mi0343_get_ctrl(struct sn9c102_device* cam,
 	case V4L2_CID_RED_BALANCE:
 	case V4L2_CID_BLUE_BALANCE:
 	case SN9C102_V4L2_CID_GREEN_BALANCE:
-		ctrl->value = mi0343_i2c_data[3] | (mi0343_i2c_data[2] << 8);
+		ctrl->value = data[3] | (data[2] << 8);
 		if (ctrl->value >= 0x10 && ctrl->value <= 0x3f)
 			ctrl->value -= 0x10;
 		else if (ctrl->value >= 0x60 && ctrl->value <= 0x7f)
@@ -124,6 +124,7 @@ static int mi0343_get_ctrl(struct sn9c102_device* cam,
 static int mi0343_set_ctrl(struct sn9c102_device* cam,
 			   const struct v4l2_control* ctrl)
 {
+	struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
 	u16 reg = 0;
 	int err = 0;
 
@@ -143,50 +144,42 @@ static int mi0343_set_ctrl(struct sn9c102_device* cam,
 
 	switch (ctrl->id) {
 	case V4L2_CID_EXPOSURE:
-		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
-						 mi0343.i2c_slave_id,
+		err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id,
 						 0x09, ctrl->value, 0x00,
 						 0, 0);
 		break;
 	case V4L2_CID_GAIN:
-		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
-						 mi0343.i2c_slave_id,
+		err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id,
 						 0x35, reg >> 8, reg & 0xff,
 						 0, 0);
 		break;
 	case V4L2_CID_HFLIP:
-		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
-						 mi0343.i2c_slave_id,
+		err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id,
 						 0x20, ctrl->value ? 0x40:0x00,
 						 ctrl->value ? 0x20:0x00,
 						 0, 0);
 		break;
 	case V4L2_CID_VFLIP:
-		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
-						 mi0343.i2c_slave_id,
+		err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id,
 						 0x20, ctrl->value ? 0x80:0x00,
 						 ctrl->value ? 0x80:0x00,
 						 0, 0);
 		break;
 	case V4L2_CID_RED_BALANCE:
-		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
-						 mi0343.i2c_slave_id,
+		err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id,
 						 0x2d, reg >> 8, reg & 0xff,
 						 0, 0);
 		break;
 	case V4L2_CID_BLUE_BALANCE:
-		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
-						 mi0343.i2c_slave_id,
+		err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id,
 						 0x2c, reg >> 8, reg & 0xff,
 						 0, 0);
 		break;
 	case SN9C102_V4L2_CID_GREEN_BALANCE:
-		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
-						 mi0343.i2c_slave_id,
+		err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id,
 						 0x2b, reg >> 8, reg & 0xff,
 						 0, 0);
-		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
-						 mi0343.i2c_slave_id,
+		err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id,
 						 0x2e, reg >> 8, reg & 0xff,
 						 0, 0);
 		break;
@@ -216,16 +209,15 @@ static int mi0343_set_crop(struct sn9c102_device* cam,
 static int mi0343_set_pix_format(struct sn9c102_device* cam,
 				 const struct v4l2_pix_format* pix)
 {
+	struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
 	int err = 0;
 
 	if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X) {
-		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
-						 mi0343.i2c_slave_id,
+		err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id,
 						 0x0a, 0x00, 0x03, 0, 0);
 		err += sn9c102_write_reg(cam, 0x20, 0x19);
 	} else {
-		err += sn9c102_i2c_try_raw_write(cam, &mi0343, 4,
-						 mi0343.i2c_slave_id,
+		err += sn9c102_i2c_try_raw_write(cam, s, 4, s->i2c_slave_id,
 						 0x0a, 0x00, 0x05, 0, 0);
 		err += sn9c102_write_reg(cam, 0xa0, 0x19);
 	}
@@ -237,7 +229,7 @@ static int mi0343_set_pix_format(struct sn9c102_device* cam,
 static struct sn9c102_sensor mi0343 = {
 	.name = "MI-0343",
 	.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
-	.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102 | BRIDGE_SN9C103,
+	.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102,
 	.frequency = SN9C102_I2C_100KHZ,
 	.interface = SN9C102_I2C_2WIRES,
 	.i2c_slave_id = 0x5d,
@@ -343,6 +335,7 @@ static struct sn9c102_sensor mi0343 = {
 
 int sn9c102_probe_mi0343(struct sn9c102_device* cam)
 {
+	u8 data[5+1];
 	int err = 0;
 
 	err += sn9c102_write_reg(cam, 0x01, 0x01);
@@ -352,10 +345,10 @@ int sn9c102_probe_mi0343(struct sn9c102_device* cam)
 		return -EIO;
 
 	if (sn9c102_i2c_try_raw_read(cam, &mi0343, mi0343.i2c_slave_id, 0x00,
-				     2, mi0343_i2c_data) < 0)
+				     2, data) < 0)
 		return -EIO;
 
-	if (mi0343_i2c_data[4] != 0x32 && mi0343_i2c_data[3] != 0xe3)
+	if (data[4] != 0x32 || data[3] != 0xe3)
 		return -ENODEV;
 
 	sn9c102_attach_sensor(cam, &mi0343);

drivers/media/video/sn9c102/sn9c102_ov7630.c

@@ -22,9 +22,6 @@
 #include "sn9c102_sensor.h"
 
 
-static struct sn9c102_sensor ov7630;
-
-
 static int ov7630_init(struct sn9c102_device* cam)
 {
 	int err = 0;
@@ -40,7 +37,7 @@ static int ov7630_init(struct sn9c102_device* cam)
 		err += sn9c102_i2c_write(cam, 0x12, 0x8d);
 		err += sn9c102_i2c_write(cam, 0x12, 0x0d);
 		err += sn9c102_i2c_write(cam, 0x11, 0x00);
-	err += sn9c102_i2c_write(cam, 0x15, 0x34);
+		err += sn9c102_i2c_write(cam, 0x15, 0x35);
 		err += sn9c102_i2c_write(cam, 0x16, 0x03);
 		err += sn9c102_i2c_write(cam, 0x17, 0x1c);
 		err += sn9c102_i2c_write(cam, 0x18, 0xbd);

drivers/media/video/sn9c102/sn9c102_ov7660.c

@@ -22,9 +22,6 @@
 #include "sn9c102_sensor.h"
 
 
-static struct sn9c102_sensor ov7660;
-
-
 static int ov7660_init(struct sn9c102_device* cam)
 {
 	int err = 0;

drivers/media/video/sn9c102/sn9c102_pas106b.c

@@ -23,9 +23,6 @@
 #include "sn9c102_sensor.h"
 
 
-static struct sn9c102_sensor pas106b;
-
-
 static int pas106b_init(struct sn9c102_device* cam)
 {
 	int err = 0;
@@ -172,7 +169,7 @@ static int pas106b_set_pix_format(struct sn9c102_device* cam,
 static struct sn9c102_sensor pas106b = {
 	.name = "PAS106B",
 	.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
-	.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102 | BRIDGE_SN9C103,
+	.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102,
 	.sysfs_ops = SN9C102_I2C_READ | SN9C102_I2C_WRITE,
 	.frequency = SN9C102_I2C_400KHZ | SN9C102_I2C_100KHZ,
 	.interface = SN9C102_I2C_2WIRES,

drivers/media/video/sn9c102/sn9c102_pas202bcb.c

@@ -28,9 +28,6 @@
 #include "sn9c102_sensor.h"
 
 
-static struct sn9c102_sensor pas202bcb;
-
-
 static int pas202bcb_init(struct sn9c102_device* cam)
 {
 	int err = 0;

drivers/media/video/sn9c102/sn9c102_tas5110c1b.c

@@ -22,9 +22,6 @@
 #include "sn9c102_sensor.h"
 
 
-static struct sn9c102_sensor tas5110c1b;
-
-
 static int tas5110c1b_init(struct sn9c102_device* cam)
 {
 	int err = 0;
@@ -98,7 +95,7 @@ static int tas5110c1b_set_pix_format(struct sn9c102_device* cam,
 static struct sn9c102_sensor tas5110c1b = {
 	.name = "TAS5110C1B",
 	.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
-	.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102 | BRIDGE_SN9C103,
+	.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102,
 	.sysfs_ops = SN9C102_I2C_WRITE,
 	.frequency = SN9C102_I2C_100KHZ,
 	.interface = SN9C102_I2C_3WIRES,
@@ -146,7 +143,6 @@ int sn9c102_probe_tas5110c1b(struct sn9c102_device* cam)
 	const struct usb_device_id tas5110c1b_id_table[] = {
 		{ USB_DEVICE(0x0c45, 0x6001), },
 		{ USB_DEVICE(0x0c45, 0x6005), },
-		{ USB_DEVICE(0x0c45, 0x6007), },
 		{ USB_DEVICE(0x0c45, 0x60ab), },
 		{ }
 	};

drivers/media/video/sn9c102/sn9c102_tas5110d.c

+/***************************************************************************
+ * Plug-in for TAS5110D image sensor connected to the SN9C1xx PC Camera    *
+ * Controllers                                                             *
+ *                                                                         *
+ * Copyright (C) 2007 by Luca Risolia <luca.risolia@studio.unibo.it>       *
+ *                                                                         *
+ * This program is free software; you can redistribute it and/or modify    *
+ * it under the terms of the GNU General Public License as published by    *
+ * the Free Software Foundation; either version 2 of the License, or       *
+ * (at your option) any later version.                                     *
+ *                                                                         *
+ * This program is distributed in the hope that it will be useful,         *
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of          *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the           *
+ * GNU General Public License for more details.                            *
+ *                                                                         *
+ * You should have received a copy of the GNU General Public License       *
+ * along with this program; if not, write to the Free Software             *
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.               *
+ ***************************************************************************/
+
+#include "sn9c102_sensor.h"
+
+
+static int tas5110d_init(struct sn9c102_device* cam)
+{
+	int err = 0;
+
+	err += sn9c102_write_reg(cam, 0x01, 0x01);
+	err += sn9c102_write_reg(cam, 0x04, 0x01);
+	err += sn9c102_write_reg(cam, 0x0a, 0x14);
+	err += sn9c102_write_reg(cam, 0x60, 0x17);
+	err += sn9c102_write_reg(cam, 0x06, 0x18);
+	err += sn9c102_write_reg(cam, 0xfb, 0x19);
+
+	err += sn9c102_i2c_write(cam, 0x9a, 0xca);
+
+	return err;
+}
+
+
+static int tas5110d_set_crop(struct sn9c102_device* cam,
+			     const struct v4l2_rect* rect)
+{
+	struct sn9c102_sensor* s = sn9c102_get_sensor(cam);
+	int err = 0;
+	u8 h_start = (u8)(rect->left - s->cropcap.bounds.left) + 69,
+	   v_start = (u8)(rect->top - s->cropcap.bounds.top) + 9;
+
+	err += sn9c102_write_reg(cam, h_start, 0x12);
+	err += sn9c102_write_reg(cam, v_start, 0x13);
+
+	err += sn9c102_write_reg(cam, 0x14, 0x1a);
+	err += sn9c102_write_reg(cam, 0x0a, 0x1b);
+
+	return err;
+}
+
+
+static int tas5110d_set_pix_format(struct sn9c102_device* cam,
+				     const struct v4l2_pix_format* pix)
+{
+	int err = 0;
+
+	if (pix->pixelformat == V4L2_PIX_FMT_SN9C10X)
+		err += sn9c102_write_reg(cam, 0x3b, 0x19);
+	else
+		err += sn9c102_write_reg(cam, 0xfb, 0x19);
+
+	return err;
+}
+
+
+static struct sn9c102_sensor tas5110d = {
+	.name = "TAS5110D",
+	.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
+	.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102,
+	.sysfs_ops = SN9C102_I2C_WRITE,
+	.frequency = SN9C102_I2C_100KHZ,
+	.interface = SN9C102_I2C_2WIRES,
+	.i2c_slave_id = 0x61,
+	.init = &tas5110d_init,
+	.cropcap = {
+		.bounds = {
+			.left = 0,
+			.top = 0,
+			.width = 352,
+			.height = 288,
+		},
+		.defrect = {
+			.left = 0,
+			.top = 0,
+			.width = 352,
+			.height = 288,
+		},
+	},
+	.set_crop = &tas5110d_set_crop,
+	.pix_format = {
+		.width = 352,
+		.height = 288,
+		.pixelformat = V4L2_PIX_FMT_SBGGR8,
+		.priv = 8,
+	},
+	.set_pix_format = &tas5110d_set_pix_format
+};
+
+
+int sn9c102_probe_tas5110d(struct sn9c102_device* cam)
+{
+	const struct usb_device_id tas5110d_id_table[] = {
+		{ USB_DEVICE(0x0c45, 0x6007), },
+		{ }
+	};
+
+	if (!sn9c102_match_id(cam, tas5110d_id_table))
+		return -ENODEV;
+
+	sn9c102_attach_sensor(cam, &tas5110d);
+
+	return 0;
+}

drivers/media/video/sn9c102/sn9c102_tas5130d1b.c

@@ -22,9 +22,6 @@
 #include "sn9c102_sensor.h"
 
 
-static struct sn9c102_sensor tas5130d1b;
-
-
 static int tas5130d1b_init(struct sn9c102_device* cam)
 {
 	int err = 0;
@@ -99,7 +96,7 @@ static int tas5130d1b_set_pix_format(struct sn9c102_device* cam,
 static struct sn9c102_sensor tas5130d1b = {
 	.name = "TAS5130D1B",
 	.maintainer = "Luca Risolia <luca.risolia@studio.unibo.it>",
-	.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102 | BRIDGE_SN9C103,
+	.supported_bridge = BRIDGE_SN9C101 | BRIDGE_SN9C102,
 	.sysfs_ops = SN9C102_I2C_WRITE,
 	.frequency = SN9C102_I2C_100KHZ,
 	.interface = SN9C102_I2C_3WIRES,