zynq: use GIC device tree bindings

The Zynq uses the cortex-a9-gic.  This eliminates the need to hardcode
register addresses.
Signed-off-by: Josh Cartwright <josh.cartwright@ni.com>
Cc: John Linn <john.linn@xilinx.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Michal Simek <michal.simek@xilinx.com>

arch/arm/boot/dts/zynq-ep107.dts

@@ -36,16 +36,18 @@ amba {
 		ranges;
 
 		intc: interrupt-controller@f8f01000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
 			interrupt-controller;
-			compatible = "arm,gic";
-			reg = <0xF8F01000 0x1000>;
-			#interrupt-cells = <2>;
+			reg = <0xF8F01000 0x1000>,
+			      <0xF8F00100 0x100>;
 		};
 
 		uart0: uart@e0000000 {
 			compatible = "xlnx,xuartps";
 			reg = <0xE0000000 0x1000>;
-			interrupts = <59 0>;
+			interrupts = <0 27 4>;
 			clock = <50000000>;
 		};
 	};

arch/arm/mach-zynq/common.c

@@ -55,12 +55,17 @@ static void __init xilinx_init_machine(void)
 	of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
 }
 
+static struct of_device_id irq_match[] __initdata = {
+	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
+	{ }
+};
+
 /**
  * xilinx_irq_init() - Interrupt controller initialization for the GIC.
  */
 static void __init xilinx_irq_init(void)
 {
-	gic_init(0, 29, SCU_GIC_DIST_BASE, SCU_GIC_CPU_BASE);
+	of_irq_init(irq_match);
 }
 
 /* The minimum devices needed to be mapped before the VM system is up and

arch/arm/mach-zynq/include/mach/zynq_soc.h

@@ -35,8 +35,6 @@
 
 #define TTC0_BASE			IOMEM(TTC0_VIRT)
 #define SCU_PERIPH_BASE			IOMEM(SCU_PERIPH_VIRT)
-#define SCU_GIC_CPU_BASE		(SCU_PERIPH_BASE + 0x100)
-#define SCU_GIC_DIST_BASE		(SCU_PERIPH_BASE + 0x1000)
 #define PL310_L2CC_BASE			IOMEM(PL310_L2CC_VIRT)
 
 /*