Merge tag 'tty-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial/fbcon fixes from Greg KH:
 "Here are some small tty/serial and one more fbcon fix.

  They include:

   - serial core locking regression fixes

   - new device ids for 8250_pci driver

   - fbcon fix for syzbot found issue

  All have been in linux-next with no reported issues"

* tag 'tty-5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  fbcon: Fix user font detection test at fbcon_resize().
  serial: 8250_pci: Add Realtek 816a and 816b
  serial: core: fix console port-lock regression
  serial: core: fix port-lock initialisation

drivers/tty/serial/8250/8250_pci.c

@@ -5566,6 +5566,17 @@ static const struct pci_device_id serial_pci_tbl[] = {
 		PCI_ANY_ID, PCI_ANY_ID,
 		0, 0, pbn_wch384_4 },
 
+	/*
+	 * Realtek RealManage
+	 */
+	{	PCI_VENDOR_ID_REALTEK, 0x816a,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_b0_1_115200 },
+
+	{	PCI_VENDOR_ID_REALTEK, 0x816b,
+		PCI_ANY_ID, PCI_ANY_ID,
+		0, 0, pbn_b0_1_115200 },
+
 	/* Fintek PCI serial cards */
 	{ PCI_DEVICE(0x1c29, 0x1104), .driver_data = pbn_fintek_4 },
 	{ PCI_DEVICE(0x1c29, 0x1108), .driver_data = pbn_fintek_8 },

drivers/tty/serial/serial_core.c

@@ -1916,24 +1916,12 @@ static inline bool uart_console_enabled(struct uart_port *port)
 	return uart_console(port) && (port->cons->flags & CON_ENABLED);
 }
 
-static void __uart_port_spin_lock_init(struct uart_port *port)
+static void uart_port_spin_lock_init(struct uart_port *port)
 {
 	spin_lock_init(&port->lock);
 	lockdep_set_class(&port->lock, &port_lock_key);
 }
 
-/*
- * Ensure that the serial console lock is initialised early.
- * If this port is a console, then the spinlock is already initialised.
- */
-static inline void uart_port_spin_lock_init(struct uart_port *port)
-{
-	if (uart_console(port))
-		return;
-
-	__uart_port_spin_lock_init(port);
-}
-
 #if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
 /**
  *	uart_console_write - write a console message to a serial port
@@ -2086,6 +2074,14 @@ uart_set_options(struct uart_port *port, struct console *co,
 	struct ktermios termios;
 	static struct ktermios dummy;
 
+	/*
+	 * Ensure that the serial-console lock is initialised early.
+	 *
+	 * Note that the console-enabled check is needed because of kgdboc,
+	 * which can end up calling uart_set_options() for an already enabled
+	 * console via tty_find_polling_driver() and uart_poll_init().
+	 */
+	if (!uart_console_enabled(port) && !port->console_reinit)
 		uart_port_spin_lock_init(port);
 
 	memset(&termios, 0, sizeof(struct ktermios));
@@ -2378,13 +2374,6 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 		/* Power up port for set_mctrl() */
 		uart_change_pm(state, UART_PM_STATE_ON);
 
-		/*
-		 * If this driver supports console, and it hasn't been
-		 * successfully registered yet, initialise spin lock for it.
-		 */
-		if (port->cons && !(port->cons->flags & CON_ENABLED))
-			__uart_port_spin_lock_init(port);
-
 		/*
 		 * Ensure that the modem control lines are de-activated.
 		 * keep the DTR setting that is set in uart_set_options()
@@ -2801,11 +2790,13 @@ static ssize_t console_store(struct device *dev,
 		if (oldconsole && !newconsole) {
 			ret = unregister_console(uport->cons);
 		} else if (!oldconsole && newconsole) {
-			if (uart_console(uport))
+			if (uart_console(uport)) {
+				uport->console_reinit = 1;
 				register_console(uport->cons);
-			else
+			} else {
 				ret = -ENOENT;
 			}
+		}
 	} else {
 		ret = -ENXIO;
 	}
@@ -2900,6 +2891,11 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
 		goto out;
 	}
 
+	/*
+	 * If this port is in use as a console then the spinlock is already
+	 * initialised.
+	 */
+	if (!uart_console_enabled(uport))
 		uart_port_spin_lock_init(uport);
 
 	if (uport->cons && uport->dev)

drivers/video/fbdev/core/fbcon.c

@@ -2018,7 +2018,7 @@ static int fbcon_resize(struct vc_data *vc, unsigned int width,
 	struct fb_var_screeninfo var = info->var;
 	int x_diff, y_diff, virt_w, virt_h, virt_fw, virt_fh;
 
-	if (ops->p && ops->p->userfont && FNTSIZE(vc->vc_font.data)) {
+	if (p->userfont && FNTSIZE(vc->vc_font.data)) {
 		int size;
 		int pitch = PITCH(vc->vc_font.width);
 

include/linux/serial_core.h

@@ -248,6 +248,7 @@ struct uart_port {
 
 	unsigned char		hub6;			/* this should be in the 8250 driver */
 	unsigned char		suspended;
+	unsigned char		console_reinit;
 	const char		*name;			/* port name */
 	struct attribute_group	*attr_group;		/* port specific attributes */
 	const struct attribute_group **tty_groups;	/* all attributes (serial core use only) */