Merge tag 'x86-mm-2020-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 mm updates from Ingo Molnar:
 "Misc changes:

   - Unexport various PAT primitives

   - Unexport per-CPU tlbstate and uninline TLB helpers"

* tag 'x86-mm-2020-06-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  x86/tlb/uv: Add a forward declaration for struct flush_tlb_info
  x86/cpu: Export native_write_cr4() only when CONFIG_LKTDM=m
  x86/tlb: Restrict access to tlbstate
  xen/privcmd: Remove unneeded asm/tlb.h include
  x86/tlb: Move PCID helpers where they are used
  x86/tlb: Uninline nmi_uaccess_okay()
  x86/tlb: Move cr4_set_bits_and_update_boot() to the usage site
  x86/tlb: Move paravirt_tlb_remove_table() to the usage site
  x86/tlb: Move __flush_tlb_all() out of line
  x86/tlb: Move flush_tlb_others() out of line
  x86/tlb: Move __flush_tlb_one_kernel() out of line
  x86/tlb: Move __flush_tlb_one_user() out of line
  x86/tlb: Move __flush_tlb_global() out of line
  x86/tlb: Move __flush_tlb() out of line
  x86/alternatives: Move temporary_mm helpers into C
  x86/cr4: Sanitize CR4.PCE update
  x86/cpu: Uninline CR4 accessors
  x86/tlb: Uninline __get_current_cr3_fast()
  x86/mm: Use pgprotval_t in protval_4k_2_large() and protval_large_2_4k()
  x86/mm: Unexport __cachemode2pte_tbl
  ...

arch/x86/events/core.c

@@ -2166,11 +2166,6 @@ static int x86_pmu_event_init(struct perf_event *event)
 	return err;
 }
 
-static void refresh_pce(void *ignored)
-{
-	load_mm_cr4_irqsoff(this_cpu_read(cpu_tlbstate.loaded_mm));
-}
-
 static void x86_pmu_event_mapped(struct perf_event *event, struct mm_struct *mm)
 {
 	if (!(event->hw.flags & PERF_X86_EVENT_RDPMC_ALLOWED))
@@ -2189,7 +2184,7 @@ static void x86_pmu_event_mapped(struct perf_event *event, struct mm_struct *mm)
 	lockdep_assert_held_write(&mm->mmap_sem);
 
 	if (atomic_inc_return(&mm->context.perf_rdpmc_allowed) == 1)
-		on_each_cpu_mask(mm_cpumask(mm), refresh_pce, NULL, 1);
+		on_each_cpu_mask(mm_cpumask(mm), cr4_update_pce, NULL, 1);
 }
 
 static void x86_pmu_event_unmapped(struct perf_event *event, struct mm_struct *mm)
@@ -2199,7 +2194,7 @@ static void x86_pmu_event_unmapped(struct perf_event *event, struct mm_struct *m
 		return;
 
 	if (atomic_dec_and_test(&mm->context.perf_rdpmc_allowed))
-		on_each_cpu_mask(mm_cpumask(mm), refresh_pce, NULL, 1);
+		on_each_cpu_mask(mm_cpumask(mm), cr4_update_pce, NULL, 1);
 }
 
 static int x86_pmu_event_idx(struct perf_event *event)
@@ -2257,7 +2252,7 @@ static ssize_t set_attr_rdpmc(struct device *cdev,
 		else if (x86_pmu.attr_rdpmc == 2)
 			static_branch_dec(&rdpmc_always_available_key);
 
-		on_each_cpu(refresh_pce, NULL, 1);
+		on_each_cpu(cr4_update_pce, NULL, 1);
 		x86_pmu.attr_rdpmc = val;
 	}
 

arch/x86/include/asm/memtype.h

@@ -24,4 +24,7 @@ extern void memtype_free_io(resource_size_t start, resource_size_t end);
 
 extern bool pat_pfn_immune_to_uc_mtrr(unsigned long pfn);
 
+bool x86_has_pat_wp(void);
+enum page_cache_mode pgprot2cachemode(pgprot_t pgprot);
+
 #endif /* _ASM_X86_MEMTYPE_H */

arch/x86/include/asm/mmu_context.h

@@ -24,21 +24,9 @@ static inline void paravirt_activate_mm(struct mm_struct *prev,
 #endif	/* !CONFIG_PARAVIRT_XXL */
 
 #ifdef CONFIG_PERF_EVENTS
-
 DECLARE_STATIC_KEY_FALSE(rdpmc_never_available_key);
 DECLARE_STATIC_KEY_FALSE(rdpmc_always_available_key);
-
-static inline void load_mm_cr4_irqsoff(struct mm_struct *mm)
-{
-	if (static_branch_unlikely(&rdpmc_always_available_key) ||
-	    (!static_branch_unlikely(&rdpmc_never_available_key) &&
-	     atomic_read(&mm->context.perf_rdpmc_allowed)))
-		cr4_set_bits_irqsoff(X86_CR4_PCE);
-	else
-		cr4_clear_bits_irqsoff(X86_CR4_PCE);
-}
-#else
-static inline void load_mm_cr4_irqsoff(struct mm_struct *mm) {}
+void cr4_update_pce(void *ignored);
 #endif
 
 #ifdef CONFIG_MODIFY_LDT_SYSCALL
@@ -225,78 +213,6 @@ static inline bool arch_vma_access_permitted(struct vm_area_struct *vma,
 	return __pkru_allows_pkey(vma_pkey(vma), write);
 }
 
-/*
- * This can be used from process context to figure out what the value of
- * CR3 is without needing to do a (slow) __read_cr3().
- *
- * It's intended to be used for code like KVM that sneakily changes CR3
- * and needs to restore it.  It needs to be used very carefully.
- */
-static inline unsigned long __get_current_cr3_fast(void)
-{
-	unsigned long cr3 = build_cr3(this_cpu_read(cpu_tlbstate.loaded_mm)->pgd,
-		this_cpu_read(cpu_tlbstate.loaded_mm_asid));
-
-	/* For now, be very restrictive about when this can be called. */
-	VM_WARN_ON(in_nmi() || preemptible());
-
-	VM_BUG_ON(cr3 != __read_cr3());
-	return cr3;
-}
-
-typedef struct {
-	struct mm_struct *mm;
-} temp_mm_state_t;
-
-/*
- * Using a temporary mm allows to set temporary mappings that are not accessible
- * by other CPUs. Such mappings are needed to perform sensitive memory writes
- * that override the kernel memory protections (e.g., W^X), without exposing the
- * temporary page-table mappings that are required for these write operations to
- * other CPUs. Using a temporary mm also allows to avoid TLB shootdowns when the
- * mapping is torn down.
- *
- * Context: The temporary mm needs to be used exclusively by a single core. To
- *          harden security IRQs must be disabled while the temporary mm is
- *          loaded, thereby preventing interrupt handler bugs from overriding
- *          the kernel memory protection.
- */
-static inline temp_mm_state_t use_temporary_mm(struct mm_struct *mm)
-{
-	temp_mm_state_t temp_state;
-
-	lockdep_assert_irqs_disabled();
-	temp_state.mm = this_cpu_read(cpu_tlbstate.loaded_mm);
-	switch_mm_irqs_off(NULL, mm, current);
-
-	/*
-	 * If breakpoints are enabled, disable them while the temporary mm is
-	 * used. Userspace might set up watchpoints on addresses that are used
-	 * in the temporary mm, which would lead to wrong signals being sent or
-	 * crashes.
-	 *
-	 * Note that breakpoints are not disabled selectively, which also causes
-	 * kernel breakpoints (e.g., perf's) to be disabled. This might be
-	 * undesirable, but still seems reasonable as the code that runs in the
-	 * temporary mm should be short.
-	 */
-	if (hw_breakpoint_active())
-		hw_breakpoint_disable();
-
-	return temp_state;
-}
-
-static inline void unuse_temporary_mm(temp_mm_state_t prev_state)
-{
-	lockdep_assert_irqs_disabled();
-	switch_mm_irqs_off(NULL, prev_state.mm, current);
-
-	/*
-	 * Restore the breakpoints if they were disabled before the temporary mm
-	 * was loaded.
-	 */
-	if (hw_breakpoint_active())
-		hw_breakpoint_restore();
-}
+unsigned long __get_current_cr3_fast(void);
 
 #endif /* _ASM_X86_MMU_CONTEXT_H */

arch/x86/include/asm/paravirt.h

@@ -47,7 +47,13 @@ static inline void slow_down_io(void)
 #endif
 }
 
-static inline void __flush_tlb(void)
+void native_flush_tlb_local(void);
+void native_flush_tlb_global(void);
+void native_flush_tlb_one_user(unsigned long addr);
+void native_flush_tlb_others(const struct cpumask *cpumask,
+			     const struct flush_tlb_info *info);
+
+static inline void __flush_tlb_local(void)
 {
 	PVOP_VCALL0(mmu.flush_tlb_user);
 }
@@ -62,8 +68,8 @@ static inline void __flush_tlb_one_user(unsigned long addr)
 	PVOP_VCALL1(mmu.flush_tlb_one_user, addr);
 }
 
-static inline void flush_tlb_others(const struct cpumask *cpumask,
-				    const struct flush_tlb_info *info)
+static inline void __flush_tlb_others(const struct cpumask *cpumask,
+				      const struct flush_tlb_info *info)
 {
 	PVOP_VCALL2(mmu.flush_tlb_others, cpumask, info);
 }

arch/x86/include/asm/pgtable_32.h

@@ -60,7 +60,7 @@ void sync_initial_page_table(void);
 #define kpte_clear_flush(ptep, vaddr)		\
 do {						\
 	pte_clear(&init_mm, (vaddr), (ptep));	\
-	__flush_tlb_one_kernel((vaddr));		\
+	flush_tlb_one_kernel((vaddr));		\
 } while (0)
 
 #endif /* !__ASSEMBLY__ */

arch/x86/include/asm/pgtable_types.h

@@ -471,9 +471,6 @@ static inline pteval_t pte_flags(pte_t pte)
 	return native_pte_val(pte) & PTE_FLAGS_MASK;
 }
 
-extern uint16_t __cachemode2pte_tbl[_PAGE_CACHE_MODE_NUM];
-extern uint8_t __pte2cachemode_tbl[8];
-
 #define __pte2cm_idx(cb)				\
 	((((cb) >> (_PAGE_BIT_PAT - 2)) & 4) |		\
 	 (((cb) >> (_PAGE_BIT_PCD - 1)) & 2) |		\
@@ -483,43 +480,26 @@ extern uint8_t __pte2cachemode_tbl[8];
 	 (((i) & 2) << (_PAGE_BIT_PCD - 1)) |		\
 	 (((i) & 1) << _PAGE_BIT_PWT))
 
-static inline unsigned long cachemode2protval(enum page_cache_mode pcm)
+unsigned long cachemode2protval(enum page_cache_mode pcm);
+
+static inline pgprotval_t protval_4k_2_large(pgprotval_t val)
 {
-	if (likely(pcm == 0))
-		return 0;
-	return __cachemode2pte_tbl[pcm];
+	return (val & ~(_PAGE_PAT | _PAGE_PAT_LARGE)) |
+		((val & _PAGE_PAT) << (_PAGE_BIT_PAT_LARGE - _PAGE_BIT_PAT));
 }
-static inline pgprot_t cachemode2pgprot(enum page_cache_mode pcm)
+static inline pgprot_t pgprot_4k_2_large(pgprot_t pgprot)
 {
-	return __pgprot(cachemode2protval(pcm));
+	return __pgprot(protval_4k_2_large(pgprot_val(pgprot)));
 }
-static inline enum page_cache_mode pgprot2cachemode(pgprot_t pgprot)
+static inline pgprotval_t protval_large_2_4k(pgprotval_t val)
 {
-	unsigned long masked;
-
-	masked = pgprot_val(pgprot) & _PAGE_CACHE_MASK;
-	if (likely(masked == 0))
-		return 0;
-	return __pte2cachemode_tbl[__pte2cm_idx(masked)];
-}
-static inline pgprot_t pgprot_4k_2_large(pgprot_t pgprot)
-{
-	pgprotval_t val = pgprot_val(pgprot);
-	pgprot_t new;
-
-	pgprot_val(new) = (val & ~(_PAGE_PAT | _PAGE_PAT_LARGE)) |
-		((val & _PAGE_PAT) << (_PAGE_BIT_PAT_LARGE - _PAGE_BIT_PAT));
-	return new;
+	return (val & ~(_PAGE_PAT | _PAGE_PAT_LARGE)) |
+		((val & _PAGE_PAT_LARGE) >>
+		 (_PAGE_BIT_PAT_LARGE - _PAGE_BIT_PAT));
 }
 static inline pgprot_t pgprot_large_2_4k(pgprot_t pgprot)
 {
-	pgprotval_t val = pgprot_val(pgprot);
-	pgprot_t new;
-
-	pgprot_val(new) = (val & ~(_PAGE_PAT | _PAGE_PAT_LARGE)) |
-			  ((val & _PAGE_PAT_LARGE) >>
-			   (_PAGE_BIT_PAT_LARGE - _PAGE_BIT_PAT));
-	return new;
+	return __pgprot(protval_large_2_4k(pgprot_val(pgprot)));
 }
 
 

arch/x86/include/asm/tlbflush.h

@@ -13,140 +13,51 @@
 #include <asm/pti.h>
 #include <asm/processor-flags.h>
 
-/*
- * The x86 feature is called PCID (Process Context IDentifier). It is similar
- * to what is traditionally called ASID on the RISC processors.
- *
- * We don't use the traditional ASID implementation, where each process/mm gets
- * its own ASID and flush/restart when we run out of ASID space.
- *
- * Instead we have a small per-cpu array of ASIDs and cache the last few mm's
- * that came by on this CPU, allowing cheaper switch_mm between processes on
- * this CPU.
- *
- * We end up with different spaces for different things. To avoid confusion we
- * use different names for each of them:
- *
- * ASID  - [0, TLB_NR_DYN_ASIDS-1]
- *         the canonical identifier for an mm
- *
- * kPCID - [1, TLB_NR_DYN_ASIDS]
- *         the value we write into the PCID part of CR3; corresponds to the
- *         ASID+1, because PCID 0 is special.
- *
- * uPCID - [2048 + 1, 2048 + TLB_NR_DYN_ASIDS]
- *         for KPTI each mm has two address spaces and thus needs two
- *         PCID values, but we can still do with a single ASID denomination
- *         for each mm. Corresponds to kPCID + 2048.
- *
- */
-
-/* There are 12 bits of space for ASIDS in CR3 */
-#define CR3_HW_ASID_BITS		12
-
-/*
- * When enabled, PAGE_TABLE_ISOLATION consumes a single bit for
- * user/kernel switches
- */
-#ifdef CONFIG_PAGE_TABLE_ISOLATION
-# define PTI_CONSUMED_PCID_BITS	1
-#else
-# define PTI_CONSUMED_PCID_BITS	0
-#endif
+void __flush_tlb_all(void);
 
-#define CR3_AVAIL_PCID_BITS (X86_CR3_PCID_BITS - PTI_CONSUMED_PCID_BITS)
+#define TLB_FLUSH_ALL	-1UL
 
-/*
- * ASIDs are zero-based: 0->MAX_AVAIL_ASID are valid.  -1 below to account
- * for them being zero-based.  Another -1 is because PCID 0 is reserved for
- * use by non-PCID-aware users.
- */
-#define MAX_ASID_AVAILABLE ((1 << CR3_AVAIL_PCID_BITS) - 2)
+void cr4_update_irqsoff(unsigned long set, unsigned long clear);
+unsigned long cr4_read_shadow(void);
 
-/*
- * 6 because 6 should be plenty and struct tlb_state will fit in two cache
- * lines.
- */
-#define TLB_NR_DYN_ASIDS	6
-
-/*
- * Given @asid, compute kPCID
- */
-static inline u16 kern_pcid(u16 asid)
+/* Set in this cpu's CR4. */
+static inline void cr4_set_bits_irqsoff(unsigned long mask)
 {
-	VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
-
-#ifdef CONFIG_PAGE_TABLE_ISOLATION
-	/*
-	 * Make sure that the dynamic ASID space does not confict with the
-	 * bit we are using to switch between user and kernel ASIDs.
-	 */
-	BUILD_BUG_ON(TLB_NR_DYN_ASIDS >= (1 << X86_CR3_PTI_PCID_USER_BIT));
-
-	/*
-	 * The ASID being passed in here should have respected the
-	 * MAX_ASID_AVAILABLE and thus never have the switch bit set.
-	 */
-	VM_WARN_ON_ONCE(asid & (1 << X86_CR3_PTI_PCID_USER_BIT));
-#endif
-	/*
-	 * The dynamically-assigned ASIDs that get passed in are small
-	 * (<TLB_NR_DYN_ASIDS).  They never have the high switch bit set,
-	 * so do not bother to clear it.
-	 *
-	 * If PCID is on, ASID-aware code paths put the ASID+1 into the
-	 * PCID bits.  This serves two purposes.  It prevents a nasty
-	 * situation in which PCID-unaware code saves CR3, loads some other
-	 * value (with PCID == 0), and then restores CR3, thus corrupting
-	 * the TLB for ASID 0 if the saved ASID was nonzero.  It also means
-	 * that any bugs involving loading a PCID-enabled CR3 with
-	 * CR4.PCIDE off will trigger deterministically.
-	 */
-	return asid + 1;
+	cr4_update_irqsoff(mask, 0);
 }
 
-/*
- * Given @asid, compute uPCID
- */
-static inline u16 user_pcid(u16 asid)
+/* Clear in this cpu's CR4. */
+static inline void cr4_clear_bits_irqsoff(unsigned long mask)
 {
-	u16 ret = kern_pcid(asid);
-#ifdef CONFIG_PAGE_TABLE_ISOLATION
-	ret |= 1 << X86_CR3_PTI_PCID_USER_BIT;
-#endif
-	return ret;
+	cr4_update_irqsoff(0, mask);
 }
 
-struct pgd_t;
-static inline unsigned long build_cr3(pgd_t *pgd, u16 asid)
+/* Set in this cpu's CR4. */
+static inline void cr4_set_bits(unsigned long mask)
 {
-	if (static_cpu_has(X86_FEATURE_PCID)) {
-		return __sme_pa(pgd) | kern_pcid(asid);
-	} else {
-		VM_WARN_ON_ONCE(asid != 0);
-		return __sme_pa(pgd);
-	}
+	unsigned long flags;
+
+	local_irq_save(flags);
+	cr4_set_bits_irqsoff(mask);
+	local_irq_restore(flags);
 }
 
-static inline unsigned long build_cr3_noflush(pgd_t *pgd, u16 asid)
+/* Clear in this cpu's CR4. */
+static inline void cr4_clear_bits(unsigned long mask)
 {
-	VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
-	/*
-	 * Use boot_cpu_has() instead of this_cpu_has() as this function
-	 * might be called during early boot. This should work even after
-	 * boot because all CPU's the have same capabilities:
-	 */
-	VM_WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_PCID));
-	return __sme_pa(pgd) | kern_pcid(asid) | CR3_NOFLUSH;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	cr4_clear_bits_irqsoff(mask);
+	local_irq_restore(flags);
 }
 
-#ifdef CONFIG_PARAVIRT
-#include <asm/paravirt.h>
-#else
-#define __flush_tlb() __native_flush_tlb()
-#define __flush_tlb_global() __native_flush_tlb_global()
-#define __flush_tlb_one_user(addr) __native_flush_tlb_one_user(addr)
-#endif
+#ifndef MODULE
+/*
+ * 6 because 6 should be plenty and struct tlb_state will fit in two cache
+ * lines.
+ */
+#define TLB_NR_DYN_ASIDS	6
 
 struct tlb_context {
 	u64 ctx_id;
@@ -242,38 +153,7 @@ struct tlb_state {
 };
 DECLARE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate);
 
-/*
- * Blindly accessing user memory from NMI context can be dangerous
- * if we're in the middle of switching the current user task or
- * switching the loaded mm.  It can also be dangerous if we
- * interrupted some kernel code that was temporarily using a
- * different mm.
- */
-static inline bool nmi_uaccess_okay(void)
-{
-	struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm);
-	struct mm_struct *current_mm = current->mm;
-
-	VM_WARN_ON_ONCE(!loaded_mm);
-
-	/*
-	 * The condition we want to check is
-	 * current_mm->pgd == __va(read_cr3_pa()).  This may be slow, though,
-	 * if we're running in a VM with shadow paging, and nmi_uaccess_okay()
-	 * is supposed to be reasonably fast.
-	 *
-	 * Instead, we check the almost equivalent but somewhat conservative
-	 * condition below, and we rely on the fact that switch_mm_irqs_off()
-	 * sets loaded_mm to LOADED_MM_SWITCHING before writing to CR3.
-	 */
-	if (loaded_mm != current_mm)
-		return false;
-
-	VM_WARN_ON_ONCE(current_mm->pgd != __va(read_cr3_pa()));
-
-	return true;
-}
-
+bool nmi_uaccess_okay(void);
 #define nmi_uaccess_okay nmi_uaccess_okay
 
 /* Initialize cr4 shadow for this CPU. */
@@ -282,249 +162,11 @@ static inline void cr4_init_shadow(void)
 	this_cpu_write(cpu_tlbstate.cr4, __read_cr4());
 }
 
-static inline void __cr4_set(unsigned long cr4)
-{
-	lockdep_assert_irqs_disabled();
-	this_cpu_write(cpu_tlbstate.cr4, cr4);
-	__write_cr4(cr4);
-}
-
-/* Set in this cpu's CR4. */
-static inline void cr4_set_bits_irqsoff(unsigned long mask)
-{
-	unsigned long cr4;
-
-	cr4 = this_cpu_read(cpu_tlbstate.cr4);
-	if ((cr4 | mask) != cr4)
-		__cr4_set(cr4 | mask);
-}
-
-/* Clear in this cpu's CR4. */
-static inline void cr4_clear_bits_irqsoff(unsigned long mask)
-{
-	unsigned long cr4;
-
-	cr4 = this_cpu_read(cpu_tlbstate.cr4);
-	if ((cr4 & ~mask) != cr4)
-		__cr4_set(cr4 & ~mask);
-}
-
-/* Set in this cpu's CR4. */
-static inline void cr4_set_bits(unsigned long mask)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	cr4_set_bits_irqsoff(mask);
-	local_irq_restore(flags);
-}
-
-/* Clear in this cpu's CR4. */
-static inline void cr4_clear_bits(unsigned long mask)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	cr4_clear_bits_irqsoff(mask);
-	local_irq_restore(flags);
-}
-
-static inline void cr4_toggle_bits_irqsoff(unsigned long mask)
-{
-	unsigned long cr4;
-
-	cr4 = this_cpu_read(cpu_tlbstate.cr4);
-	__cr4_set(cr4 ^ mask);
-}
-
-/* Read the CR4 shadow. */
-static inline unsigned long cr4_read_shadow(void)
-{
-	return this_cpu_read(cpu_tlbstate.cr4);
-}
-
-/*
- * Mark all other ASIDs as invalid, preserves the current.
- */
-static inline void invalidate_other_asid(void)
-{
-	this_cpu_write(cpu_tlbstate.invalidate_other, true);
-}
-
-/*
- * Save some of cr4 feature set we're using (e.g.  Pentium 4MB
- * enable and PPro Global page enable), so that any CPU's that boot
- * up after us can get the correct flags.  This should only be used
- * during boot on the boot cpu.
- */
 extern unsigned long mmu_cr4_features;
 extern u32 *trampoline_cr4_features;
 
-static inline void cr4_set_bits_and_update_boot(unsigned long mask)
-{
-	mmu_cr4_features |= mask;
-	if (trampoline_cr4_features)
-		*trampoline_cr4_features = mmu_cr4_features;
-	cr4_set_bits(mask);
-}
-
 extern void initialize_tlbstate_and_flush(void);
 
-/*
- * Given an ASID, flush the corresponding user ASID.  We can delay this
- * until the next time we switch to it.
- *
- * See SWITCH_TO_USER_CR3.
- */
-static inline void invalidate_user_asid(u16 asid)
-{
-	/* There is no user ASID if address space separation is off */
-	if (!IS_ENABLED(CONFIG_PAGE_TABLE_ISOLATION))
-		return;
-
-	/*
-	 * We only have a single ASID if PCID is off and the CR3
-	 * write will have flushed it.
-	 */
-	if (!cpu_feature_enabled(X86_FEATURE_PCID))
-		return;
-
-	if (!static_cpu_has(X86_FEATURE_PTI))
-		return;
-
-	__set_bit(kern_pcid(asid),
-		  (unsigned long *)this_cpu_ptr(&cpu_tlbstate.user_pcid_flush_mask));
-}
-
-/*
- * flush the entire current user mapping
- */
-static inline void __native_flush_tlb(void)
-{
-	/*
-	 * Preemption or interrupts must be disabled to protect the access
-	 * to the per CPU variable and to prevent being preempted between
-	 * read_cr3() and write_cr3().
-	 */
-	WARN_ON_ONCE(preemptible());
-
-	invalidate_user_asid(this_cpu_read(cpu_tlbstate.loaded_mm_asid));
-
-	/* If current->mm == NULL then the read_cr3() "borrows" an mm */
-	native_write_cr3(__native_read_cr3());
-}
-
-/*
- * flush everything
- */
-static inline void __native_flush_tlb_global(void)
-{
-	unsigned long cr4, flags;
-
-	if (static_cpu_has(X86_FEATURE_INVPCID)) {
-		/*
-		 * Using INVPCID is considerably faster than a pair of writes
-		 * to CR4 sandwiched inside an IRQ flag save/restore.
-		 *
-		 * Note, this works with CR4.PCIDE=0 or 1.
-		 */
-		invpcid_flush_all();
-		return;
-	}
-
-	/*
-	 * Read-modify-write to CR4 - protect it from preemption and
-	 * from interrupts. (Use the raw variant because this code can
-	 * be called from deep inside debugging code.)
-	 */
-	raw_local_irq_save(flags);
-
-	cr4 = this_cpu_read(cpu_tlbstate.cr4);
-	/* toggle PGE */
-	native_write_cr4(cr4 ^ X86_CR4_PGE);
-	/* write old PGE again and flush TLBs */
-	native_write_cr4(cr4);
-
-	raw_local_irq_restore(flags);
-}
-
-/*
- * flush one page in the user mapping
- */
-static inline void __native_flush_tlb_one_user(unsigned long addr)
-{
-	u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid);
-
-	asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
-
-	if (!static_cpu_has(X86_FEATURE_PTI))
-		return;
-
-	/*
-	 * Some platforms #GP if we call invpcid(type=1/2) before CR4.PCIDE=1.
-	 * Just use invalidate_user_asid() in case we are called early.
-	 */
-	if (!this_cpu_has(X86_FEATURE_INVPCID_SINGLE))
-		invalidate_user_asid(loaded_mm_asid);
-	else
-		invpcid_flush_one(user_pcid(loaded_mm_asid), addr);
-}
-
-/*
- * flush everything
- */
-static inline void __flush_tlb_all(void)
-{
-	/*
-	 * This is to catch users with enabled preemption and the PGE feature
-	 * and don't trigger the warning in __native_flush_tlb().
-	 */
-	VM_WARN_ON_ONCE(preemptible());
-
-	if (boot_cpu_has(X86_FEATURE_PGE)) {
-		__flush_tlb_global();
-	} else {
-		/*
-		 * !PGE -> !PCID (setup_pcid()), thus every flush is total.
-		 */
-		__flush_tlb();
-	}
-}
-
-/*
- * flush one page in the kernel mapping
- */
-static inline void __flush_tlb_one_kernel(unsigned long addr)
-{
-	count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
-
-	/*
-	 * If PTI is off, then __flush_tlb_one_user() is just INVLPG or its
-	 * paravirt equivalent.  Even with PCID, this is sufficient: we only
-	 * use PCID if we also use global PTEs for the kernel mapping, and
-	 * INVLPG flushes global translations across all address spaces.
-	 *
-	 * If PTI is on, then the kernel is mapped with non-global PTEs, and
-	 * __flush_tlb_one_user() will flush the given address for the current
-	 * kernel address space and for its usermode counterpart, but it does
-	 * not flush it for other address spaces.
-	 */
-	__flush_tlb_one_user(addr);
-
-	if (!static_cpu_has(X86_FEATURE_PTI))
-		return;
-
-	/*
-	 * See above.  We need to propagate the flush to all other address
-	 * spaces.  In principle, we only need to propagate it to kernelmode
-	 * address spaces, but the extra bookkeeping we would need is not
-	 * worth it.
-	 */
-	invalidate_other_asid();
-}
-
-#define TLB_FLUSH_ALL	-1UL
-
 /*
  * TLB flushing:
  *
@@ -563,7 +205,15 @@ struct flush_tlb_info {
 	bool			freed_tables;
 };
 
-#define local_flush_tlb() __flush_tlb()
+void flush_tlb_local(void);
+void flush_tlb_one_user(unsigned long addr);
+void flush_tlb_one_kernel(unsigned long addr);
+void flush_tlb_others(const struct cpumask *cpumask,
+		      const struct flush_tlb_info *info);
+
+#ifdef CONFIG_PARAVIRT
+#include <asm/paravirt.h>
+#endif
 
 #define flush_tlb_mm(mm)						\
 		flush_tlb_mm_range(mm, 0UL, TLB_FLUSH_ALL, 0UL, true)
@@ -585,9 +235,6 @@ static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long a)
 	flush_tlb_mm_range(vma->vm_mm, a, a + PAGE_SIZE, PAGE_SHIFT, false);
 }
 
-void native_flush_tlb_others(const struct cpumask *cpumask,
-			     const struct flush_tlb_info *info);
-
 static inline u64 inc_mm_tlb_gen(struct mm_struct *mm)
 {
 	/*
@@ -608,12 +255,6 @@ static inline void arch_tlbbatch_add_mm(struct arch_tlbflush_unmap_batch *batch,
 
 extern void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch);
 
-#ifndef CONFIG_PARAVIRT
-#define flush_tlb_others(mask, info)	\
-	native_flush_tlb_others(mask, info)
-
-#define paravirt_tlb_remove_table(tlb, page) \
-	tlb_remove_page(tlb, (void *)(page))
-#endif
+#endif /* !MODULE */
 
 #endif /* _ASM_X86_TLBFLUSH_H */

arch/x86/include/asm/uv/uv.h

@@ -8,6 +8,7 @@ enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC};
 
 struct cpumask;
 struct mm_struct;
+struct flush_tlb_info;
 
 #ifdef CONFIG_X86_UV
 #include <linux/efi.h>

arch/x86/kernel/alternative.c

@@ -783,6 +783,61 @@ void __init_or_module text_poke_early(void *addr, const void *opcode,
 	}
 }
 
+typedef struct {
+	struct mm_struct *mm;
+} temp_mm_state_t;
+
+/*
+ * Using a temporary mm allows to set temporary mappings that are not accessible
+ * by other CPUs. Such mappings are needed to perform sensitive memory writes
+ * that override the kernel memory protections (e.g., W^X), without exposing the
+ * temporary page-table mappings that are required for these write operations to
+ * other CPUs. Using a temporary mm also allows to avoid TLB shootdowns when the
+ * mapping is torn down.
+ *
+ * Context: The temporary mm needs to be used exclusively by a single core. To
+ *          harden security IRQs must be disabled while the temporary mm is
+ *          loaded, thereby preventing interrupt handler bugs from overriding
+ *          the kernel memory protection.
+ */
+static inline temp_mm_state_t use_temporary_mm(struct mm_struct *mm)
+{
+	temp_mm_state_t temp_state;
+
+	lockdep_assert_irqs_disabled();
+	temp_state.mm = this_cpu_read(cpu_tlbstate.loaded_mm);
+	switch_mm_irqs_off(NULL, mm, current);
+
+	/*
+	 * If breakpoints are enabled, disable them while the temporary mm is
+	 * used. Userspace might set up watchpoints on addresses that are used
+	 * in the temporary mm, which would lead to wrong signals being sent or
+	 * crashes.
+	 *
+	 * Note that breakpoints are not disabled selectively, which also causes
+	 * kernel breakpoints (e.g., perf's) to be disabled. This might be
+	 * undesirable, but still seems reasonable as the code that runs in the
+	 * temporary mm should be short.
+	 */
+	if (hw_breakpoint_active())
+		hw_breakpoint_disable();
+
+	return temp_state;
+}
+
+static inline void unuse_temporary_mm(temp_mm_state_t prev_state)
+{
+	lockdep_assert_irqs_disabled();
+	switch_mm_irqs_off(NULL, prev_state.mm, current);
+
+	/*
+	 * Restore the breakpoints if they were disabled before the temporary mm
+	 * was loaded.
+	 */
+	if (hw_breakpoint_active())
+		hw_breakpoint_restore();
+}
+
 __ro_after_init struct mm_struct *poking_mm;
 __ro_after_init unsigned long poking_addr;
 

arch/x86/kernel/cpu/common.c

@@ -387,7 +387,30 @@ void native_write_cr4(unsigned long val)
 			  bits_missing);
 	}
 }
-EXPORT_SYMBOL(native_write_cr4);
+#if IS_MODULE(CONFIG_LKDTM)
+EXPORT_SYMBOL_GPL(native_write_cr4);
+#endif
+
+void cr4_update_irqsoff(unsigned long set, unsigned long clear)
+{
+	unsigned long newval, cr4 = this_cpu_read(cpu_tlbstate.cr4);
+
+	lockdep_assert_irqs_disabled();
+
+	newval = (cr4 & ~clear) | set;
+	if (newval != cr4) {
+		this_cpu_write(cpu_tlbstate.cr4, newval);
+		__write_cr4(newval);
+	}
+}
+EXPORT_SYMBOL(cr4_update_irqsoff);
+
+/* Read the CR4 shadow. */
+unsigned long cr4_read_shadow(void)
+{
+	return this_cpu_read(cpu_tlbstate.cr4);
+}
+EXPORT_SYMBOL_GPL(cr4_read_shadow);
 
 void cr4_init(void)
 {

arch/x86/kernel/cpu/mtrr/generic.c

@@ -761,7 +761,7 @@ static void prepare_set(void) __acquires(set_atomicity_lock)
 
 	/* Flush all TLBs via a mov %cr3, %reg; mov %reg, %cr3 */
 	count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
-	__flush_tlb();
+	flush_tlb_local();
 
 	/* Save MTRR state */
 	rdmsr(MSR_MTRRdefType, deftype_lo, deftype_hi);
@@ -778,7 +778,7 @@ static void post_set(void) __releases(set_atomicity_lock)
 {
 	/* Flush TLBs (no need to flush caches - they are disabled) */
 	count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
-	__flush_tlb();
+	flush_tlb_local();
 
 	/* Intel (P6) standard MTRRs */
 	mtrr_wrmsr(MSR_MTRRdefType, deftype_lo, deftype_hi);

arch/x86/kernel/paravirt.c

@@ -160,25 +160,6 @@ unsigned paravirt_patch_insns(void *insn_buff, unsigned len,
 	return insn_len;
 }
 
-static void native_flush_tlb(void)
-{
-	__native_flush_tlb();
-}
-
-/*
- * Global pages have to be flushed a bit differently. Not a real
- * performance problem because this does not happen often.
- */
-static void native_flush_tlb_global(void)
-{
-	__native_flush_tlb_global();
-}
-
-static void native_flush_tlb_one_user(unsigned long addr)
-{
-	__native_flush_tlb_one_user(addr);
-}
-
 struct static_key paravirt_steal_enabled;
 struct static_key paravirt_steal_rq_enabled;
 
@@ -359,7 +340,7 @@ struct paravirt_patch_template pv_ops = {
 #endif /* CONFIG_PARAVIRT_XXL */
 
 	/* Mmu ops. */
-	.mmu.flush_tlb_user	= native_flush_tlb,
+	.mmu.flush_tlb_user	= native_flush_tlb_local,
 	.mmu.flush_tlb_kernel	= native_flush_tlb_global,
 	.mmu.flush_tlb_one_user	= native_flush_tlb_one_user,
 	.mmu.flush_tlb_others	= native_flush_tlb_others,

arch/x86/kernel/process.c

@@ -612,6 +612,17 @@ void speculation_ctrl_update_current(void)
 	preempt_enable();
 }
 
+static inline void cr4_toggle_bits_irqsoff(unsigned long mask)
+{
+	unsigned long newval, cr4 = this_cpu_read(cpu_tlbstate.cr4);
+
+	newval = cr4 ^ mask;
+	if (newval != cr4) {
+		this_cpu_write(cpu_tlbstate.cr4, newval);
+		__write_cr4(newval);
+	}
+}
+
 void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p)
 {
 	unsigned long tifp, tifn;

arch/x86/mm/init.c

@@ -49,7 +49,7 @@
  *   Index into __pte2cachemode_tbl[] are the caching attribute bits of the pte
  *   (_PAGE_PWT, _PAGE_PCD, _PAGE_PAT) at index bit positions 0, 1, 2.
  */
-uint16_t __cachemode2pte_tbl[_PAGE_CACHE_MODE_NUM] = {
+static uint16_t __cachemode2pte_tbl[_PAGE_CACHE_MODE_NUM] = {
 	[_PAGE_CACHE_MODE_WB      ]	= 0         | 0        ,
 	[_PAGE_CACHE_MODE_WC      ]	= 0         | _PAGE_PCD,
 	[_PAGE_CACHE_MODE_UC_MINUS]	= 0         | _PAGE_PCD,
@@ -57,9 +57,16 @@ uint16_t __cachemode2pte_tbl[_PAGE_CACHE_MODE_NUM] = {
 	[_PAGE_CACHE_MODE_WT      ]	= 0         | _PAGE_PCD,
 	[_PAGE_CACHE_MODE_WP      ]	= 0         | _PAGE_PCD,
 };
-EXPORT_SYMBOL(__cachemode2pte_tbl);
 
-uint8_t __pte2cachemode_tbl[8] = {
+unsigned long cachemode2protval(enum page_cache_mode pcm)
+{
+	if (likely(pcm == 0))
+		return 0;
+	return __cachemode2pte_tbl[pcm];
+}
+EXPORT_SYMBOL(cachemode2protval);
+
+static uint8_t __pte2cachemode_tbl[8] = {
 	[__pte2cm_idx( 0        | 0         | 0        )] = _PAGE_CACHE_MODE_WB,
 	[__pte2cm_idx(_PAGE_PWT | 0         | 0        )] = _PAGE_CACHE_MODE_UC_MINUS,
 	[__pte2cm_idx( 0        | _PAGE_PCD | 0        )] = _PAGE_CACHE_MODE_UC_MINUS,
@@ -69,7 +76,22 @@ uint8_t __pte2cachemode_tbl[8] = {
 	[__pte2cm_idx(0         | _PAGE_PCD | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC_MINUS,
 	[__pte2cm_idx(_PAGE_PWT | _PAGE_PCD | _PAGE_PAT)] = _PAGE_CACHE_MODE_UC,
 };
-EXPORT_SYMBOL(__pte2cachemode_tbl);
+
+/* Check that the write-protect PAT entry is set for write-protect */
+bool x86_has_pat_wp(void)
+{
+	return __pte2cachemode_tbl[_PAGE_CACHE_MODE_WP] == _PAGE_CACHE_MODE_WP;
+}
+
+enum page_cache_mode pgprot2cachemode(pgprot_t pgprot)
+{
+	unsigned long masked;
+
+	masked = pgprot_val(pgprot) & _PAGE_CACHE_MASK;
+	if (likely(masked == 0))
+		return 0;
+	return __pte2cachemode_tbl[__pte2cm_idx(masked)];
+}
 
 static unsigned long __initdata pgt_buf_start;
 static unsigned long __initdata pgt_buf_end;
@@ -170,6 +192,19 @@ struct map_range {
 
 static int page_size_mask;
 
+/*
+ * Save some of cr4 feature set we're using (e.g.  Pentium 4MB
+ * enable and PPro Global page enable), so that any CPU's that boot
+ * up after us can get the correct flags. Invoked on the boot CPU.
+ */
+static inline void cr4_set_bits_and_update_boot(unsigned long mask)
+{
+	mmu_cr4_features |= mask;
+	if (trampoline_cr4_features)
+		*trampoline_cr4_features = mmu_cr4_features;
+	cr4_set_bits(mask);
+}
+
 static void __init probe_page_size_mask(void)
 {
 	/*
@@ -955,7 +990,6 @@ __visible DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) = {
 	.next_asid = 1,
 	.cr4 = ~0UL,	/* fail hard if we screw up cr4 shadow initialization */
 };
-EXPORT_PER_CPU_SYMBOL(cpu_tlbstate);
 
 void update_cache_mode_entry(unsigned entry, enum page_cache_mode cache)
 {

arch/x86/mm/init_64.c

@@ -304,7 +304,7 @@ static void __set_pte_vaddr(pud_t *pud, unsigned long vaddr, pte_t new_pte)
 	 * It's enough to flush this one mapping.
 	 * (PGE mappings get flushed as well)
 	 */
-	__flush_tlb_one_kernel(vaddr);
+	flush_tlb_one_kernel(vaddr);
 }
 
 void set_pte_vaddr_p4d(p4d_t *p4d_page, unsigned long vaddr, pte_t new_pte)
@@ -373,7 +373,7 @@ static void __init __init_extra_mapping(unsigned long phys, unsigned long size,
 	pgprot_t prot;
 
 	pgprot_val(prot) = pgprot_val(PAGE_KERNEL_LARGE) |
-		pgprot_val(pgprot_4k_2_large(cachemode2pgprot(cache)));
+		protval_4k_2_large(cachemode2protval(cache));
 	BUG_ON((phys & ~PMD_MASK) || (size & ~PMD_MASK));
 	for (; size; phys += PMD_SIZE, size -= PMD_SIZE) {
 		pgd = pgd_offset_k((unsigned long)__va(phys));

arch/x86/mm/ioremap.c

@@ -778,10 +778,8 @@ void __init *early_memremap_encrypted(resource_size_t phys_addr,
 void __init *early_memremap_encrypted_wp(resource_size_t phys_addr,
 					 unsigned long size)
 {
-	/* Be sure the write-protect PAT entry is set for write-protect */
-	if (__pte2cachemode_tbl[_PAGE_CACHE_MODE_WP] != _PAGE_CACHE_MODE_WP)
+	if (!x86_has_pat_wp())
 		return NULL;
-
 	return early_memremap_prot(phys_addr, size, __PAGE_KERNEL_ENC_WP);
 }
 
@@ -799,10 +797,8 @@ void __init *early_memremap_decrypted(resource_size_t phys_addr,
 void __init *early_memremap_decrypted_wp(resource_size_t phys_addr,
 					 unsigned long size)
 {
-	/* Be sure the write-protect PAT entry is set for write-protect */
-	if (__pte2cachemode_tbl[_PAGE_CACHE_MODE_WP] != _PAGE_CACHE_MODE_WP)
+	if (!x86_has_pat_wp())
 		return NULL;
-
 	return early_memremap_prot(phys_addr, size, __PAGE_KERNEL_NOENC_WP);
 }
 #endif	/* CONFIG_AMD_MEM_ENCRYPT */
@@ -889,5 +885,5 @@ void __init __early_set_fixmap(enum fixed_addresses idx,
 		set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, flags));
 	else
 		pte_clear(&init_mm, addr, pte);
-	__flush_tlb_one_kernel(addr);
+	flush_tlb_one_kernel(addr);
 }

arch/x86/mm/kmmio.c

@@ -173,7 +173,7 @@ static int clear_page_presence(struct kmmio_fault_page *f, bool clear)
 		return -1;
 	}
 
-	__flush_tlb_one_kernel(f->addr);
+	flush_tlb_one_kernel(f->addr);
 	return 0;
 }
 

arch/x86/mm/mem_encrypt.c

@@ -134,7 +134,7 @@ static void __init __sme_early_map_unmap_mem(void *vaddr, unsigned long size,
 		size = (size <= PMD_SIZE) ? 0 : size - PMD_SIZE;
 	} while (size);
 
-	__native_flush_tlb();
+	flush_tlb_local();
 }
 
 void __init sme_unmap_bootdata(char *real_mode_data)

arch/x86/mm/pat/set_memory.c

@@ -69,6 +69,11 @@ static DEFINE_SPINLOCK(cpa_lock);
 #define CPA_PAGES_ARRAY 4
 #define CPA_NO_CHECK_ALIAS 8 /* Do not search for aliases */
 
+static inline pgprot_t cachemode2pgprot(enum page_cache_mode pcm)
+{
+	return __pgprot(cachemode2protval(pcm));
+}
+
 #ifdef CONFIG_PROC_FS
 static unsigned long direct_pages_count[PG_LEVEL_NUM];
 
@@ -341,7 +346,7 @@ static void __cpa_flush_tlb(void *data)
 	unsigned int i;
 
 	for (i = 0; i < cpa->numpages; i++)
-		__flush_tlb_one_kernel(fix_addr(__cpa_addr(cpa, i)));
+		flush_tlb_one_kernel(fix_addr(__cpa_addr(cpa, i)));
 }
 
 static void cpa_flush(struct cpa_data *data, int cache)

arch/x86/mm/pgtable.c

@@ -19,6 +19,14 @@ EXPORT_SYMBOL(physical_mask);
 #define PGTABLE_HIGHMEM 0
 #endif
 
+#ifndef CONFIG_PARAVIRT
+static inline
+void paravirt_tlb_remove_table(struct mmu_gather *tlb, void *table)
+{
+	tlb_remove_page(tlb, table);
+}
+#endif
+
 gfp_t __userpte_alloc_gfp = GFP_PGTABLE_USER | PGTABLE_HIGHMEM;
 
 pgtable_t pte_alloc_one(struct mm_struct *mm)
@@ -706,11 +714,9 @@ int pud_set_huge(pud_t *pud, phys_addr_t addr, pgprot_t prot)
 	if (pud_present(*pud) && !pud_huge(*pud))
 		return 0;
 
-	prot = pgprot_4k_2_large(prot);
-
 	set_pte((pte_t *)pud, pfn_pte(
 		(u64)addr >> PAGE_SHIFT,
-		__pgprot(pgprot_val(prot) | _PAGE_PSE)));
+		__pgprot(protval_4k_2_large(pgprot_val(prot)) | _PAGE_PSE)));
 
 	return 1;
 }
@@ -738,11 +744,9 @@ int pmd_set_huge(pmd_t *pmd, phys_addr_t addr, pgprot_t prot)
 	if (pmd_present(*pmd) && !pmd_huge(*pmd))
 		return 0;
 
-	prot = pgprot_4k_2_large(prot);
-
 	set_pte((pte_t *)pmd, pfn_pte(
 		(u64)addr >> PAGE_SHIFT,
-		__pgprot(pgprot_val(prot) | _PAGE_PSE)));
+		__pgprot(protval_4k_2_large(pgprot_val(prot)) | _PAGE_PSE)));
 
 	return 1;
 }

arch/x86/mm/pgtable_32.c

@@ -64,7 +64,7 @@ void set_pte_vaddr(unsigned long vaddr, pte_t pteval)
 	 * It's enough to flush this one mapping.
 	 * (PGE mappings get flushed as well)
 	 */
-	__flush_tlb_one_kernel(vaddr);
+	flush_tlb_one_kernel(vaddr);
 }
 
 unsigned long __FIXADDR_TOP = 0xfffff000;

arch/x86/mm/tlb.c

@@ -18,6 +18,16 @@
 
 #include "mm_internal.h"
 
+#ifdef CONFIG_PARAVIRT
+# define STATIC_NOPV
+#else
+# define STATIC_NOPV			static
+# define __flush_tlb_local		native_flush_tlb_local
+# define __flush_tlb_global		native_flush_tlb_global
+# define __flush_tlb_one_user(addr)	native_flush_tlb_one_user(addr)
+# define __flush_tlb_others(msk, info)	native_flush_tlb_others(msk, info)
+#endif
+
 /*
  *	TLB flushing, formerly SMP-only
  *		c/o Linus Torvalds.
@@ -38,6 +48,126 @@
  */
 #define LAST_USER_MM_IBPB	0x1UL
 
+/*
+ * The x86 feature is called PCID (Process Context IDentifier). It is similar
+ * to what is traditionally called ASID on the RISC processors.
+ *
+ * We don't use the traditional ASID implementation, where each process/mm gets
+ * its own ASID and flush/restart when we run out of ASID space.
+ *
+ * Instead we have a small per-cpu array of ASIDs and cache the last few mm's
+ * that came by on this CPU, allowing cheaper switch_mm between processes on
+ * this CPU.
+ *
+ * We end up with different spaces for different things. To avoid confusion we
+ * use different names for each of them:
+ *
+ * ASID  - [0, TLB_NR_DYN_ASIDS-1]
+ *         the canonical identifier for an mm
+ *
+ * kPCID - [1, TLB_NR_DYN_ASIDS]
+ *         the value we write into the PCID part of CR3; corresponds to the
+ *         ASID+1, because PCID 0 is special.
+ *
+ * uPCID - [2048 + 1, 2048 + TLB_NR_DYN_ASIDS]
+ *         for KPTI each mm has two address spaces and thus needs two
+ *         PCID values, but we can still do with a single ASID denomination
+ *         for each mm. Corresponds to kPCID + 2048.
+ *
+ */
+
+/* There are 12 bits of space for ASIDS in CR3 */
+#define CR3_HW_ASID_BITS		12
+
+/*
+ * When enabled, PAGE_TABLE_ISOLATION consumes a single bit for
+ * user/kernel switches
+ */
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+# define PTI_CONSUMED_PCID_BITS	1
+#else
+# define PTI_CONSUMED_PCID_BITS	0
+#endif
+
+#define CR3_AVAIL_PCID_BITS (X86_CR3_PCID_BITS - PTI_CONSUMED_PCID_BITS)
+
+/*
+ * ASIDs are zero-based: 0->MAX_AVAIL_ASID are valid.  -1 below to account
+ * for them being zero-based.  Another -1 is because PCID 0 is reserved for
+ * use by non-PCID-aware users.
+ */
+#define MAX_ASID_AVAILABLE ((1 << CR3_AVAIL_PCID_BITS) - 2)
+
+/*
+ * Given @asid, compute kPCID
+ */
+static inline u16 kern_pcid(u16 asid)
+{
+	VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
+
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+	/*
+	 * Make sure that the dynamic ASID space does not confict with the
+	 * bit we are using to switch between user and kernel ASIDs.
+	 */
+	BUILD_BUG_ON(TLB_NR_DYN_ASIDS >= (1 << X86_CR3_PTI_PCID_USER_BIT));
+
+	/*
+	 * The ASID being passed in here should have respected the
+	 * MAX_ASID_AVAILABLE and thus never have the switch bit set.
+	 */
+	VM_WARN_ON_ONCE(asid & (1 << X86_CR3_PTI_PCID_USER_BIT));
+#endif
+	/*
+	 * The dynamically-assigned ASIDs that get passed in are small
+	 * (<TLB_NR_DYN_ASIDS).  They never have the high switch bit set,
+	 * so do not bother to clear it.
+	 *
+	 * If PCID is on, ASID-aware code paths put the ASID+1 into the
+	 * PCID bits.  This serves two purposes.  It prevents a nasty
+	 * situation in which PCID-unaware code saves CR3, loads some other
+	 * value (with PCID == 0), and then restores CR3, thus corrupting
+	 * the TLB for ASID 0 if the saved ASID was nonzero.  It also means
+	 * that any bugs involving loading a PCID-enabled CR3 with
+	 * CR4.PCIDE off will trigger deterministically.
+	 */
+	return asid + 1;
+}
+
+/*
+ * Given @asid, compute uPCID
+ */
+static inline u16 user_pcid(u16 asid)
+{
+	u16 ret = kern_pcid(asid);
+#ifdef CONFIG_PAGE_TABLE_ISOLATION
+	ret |= 1 << X86_CR3_PTI_PCID_USER_BIT;
+#endif
+	return ret;
+}
+
+static inline unsigned long build_cr3(pgd_t *pgd, u16 asid)
+{
+	if (static_cpu_has(X86_FEATURE_PCID)) {
+		return __sme_pa(pgd) | kern_pcid(asid);
+	} else {
+		VM_WARN_ON_ONCE(asid != 0);
+		return __sme_pa(pgd);
+	}
+}
+
+static inline unsigned long build_cr3_noflush(pgd_t *pgd, u16 asid)
+{
+	VM_WARN_ON_ONCE(asid > MAX_ASID_AVAILABLE);
+	/*
+	 * Use boot_cpu_has() instead of this_cpu_has() as this function
+	 * might be called during early boot. This should work even after
+	 * boot because all CPU's the have same capabilities:
+	 */
+	VM_WARN_ON_ONCE(!boot_cpu_has(X86_FEATURE_PCID));
+	return __sme_pa(pgd) | kern_pcid(asid) | CR3_NOFLUSH;
+}
+
 /*
  * We get here when we do something requiring a TLB invalidation
  * but could not go invalidate all of the contexts.  We do the
@@ -110,6 +240,32 @@ static void choose_new_asid(struct mm_struct *next, u64 next_tlb_gen,
 	*need_flush = true;
 }
 
+/*
+ * Given an ASID, flush the corresponding user ASID.  We can delay this
+ * until the next time we switch to it.
+ *
+ * See SWITCH_TO_USER_CR3.
+ */
+static inline void invalidate_user_asid(u16 asid)
+{
+	/* There is no user ASID if address space separation is off */
+	if (!IS_ENABLED(CONFIG_PAGE_TABLE_ISOLATION))
+		return;
+
+	/*
+	 * We only have a single ASID if PCID is off and the CR3
+	 * write will have flushed it.
+	 */
+	if (!cpu_feature_enabled(X86_FEATURE_PCID))
+		return;
+
+	if (!static_cpu_has(X86_FEATURE_PTI))
+		return;
+
+	__set_bit(kern_pcid(asid),
+		  (unsigned long *)this_cpu_ptr(&cpu_tlbstate.user_pcid_flush_mask));
+}
+
 static void load_new_mm_cr3(pgd_t *pgdir, u16 new_asid, bool need_flush)
 {
 	unsigned long new_mm_cr3;
@@ -244,6 +400,26 @@ static void cond_ibpb(struct task_struct *next)
 	}
 }
 
+#ifdef CONFIG_PERF_EVENTS
+static inline void cr4_update_pce_mm(struct mm_struct *mm)
+{
+	if (static_branch_unlikely(&rdpmc_always_available_key) ||
+	    (!static_branch_unlikely(&rdpmc_never_available_key) &&
+	     atomic_read(&mm->context.perf_rdpmc_allowed)))
+		cr4_set_bits_irqsoff(X86_CR4_PCE);
+	else
+		cr4_clear_bits_irqsoff(X86_CR4_PCE);
+}
+
+void cr4_update_pce(void *ignored)
+{
+	cr4_update_pce_mm(this_cpu_read(cpu_tlbstate.loaded_mm));
+}
+
+#else
+static inline void cr4_update_pce_mm(struct mm_struct *mm) { }
+#endif
+
 void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 			struct task_struct *tsk)
 {
@@ -403,7 +579,7 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 	this_cpu_write(cpu_tlbstate.loaded_mm_asid, new_asid);
 
 	if (next != real_prev) {
-		load_mm_cr4_irqsoff(next);
+		cr4_update_pce_mm(next);
 		switch_ldt(real_prev, next);
 	}
 }
@@ -580,7 +756,7 @@ static void flush_tlb_func_common(const struct flush_tlb_info *f,
 		unsigned long addr = f->start;
 
 		while (addr < f->end) {
-			__flush_tlb_one_user(addr);
+			flush_tlb_one_user(addr);
 			addr += 1UL << f->stride_shift;
 		}
 		if (local)
@@ -588,7 +764,7 @@ static void flush_tlb_func_common(const struct flush_tlb_info *f,
 		trace_tlb_flush(reason, nr_invalidate);
 	} else {
 		/* Full flush. */
-		local_flush_tlb();
+		flush_tlb_local();
 		if (local)
 			count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
 		trace_tlb_flush(reason, TLB_FLUSH_ALL);
@@ -623,8 +799,8 @@ static bool tlb_is_not_lazy(int cpu, void *data)
 	return !per_cpu(cpu_tlbstate.is_lazy, cpu);
 }
 
-void native_flush_tlb_others(const struct cpumask *cpumask,
-			     const struct flush_tlb_info *info)
+STATIC_NOPV void native_flush_tlb_others(const struct cpumask *cpumask,
+					 const struct flush_tlb_info *info)
 {
 	count_vm_tlb_event(NR_TLB_REMOTE_FLUSH);
 	if (info->end == TLB_FLUSH_ALL)
@@ -674,6 +850,12 @@ void native_flush_tlb_others(const struct cpumask *cpumask,
 				(void *)info, 1, cpumask);
 }
 
+void flush_tlb_others(const struct cpumask *cpumask,
+		      const struct flush_tlb_info *info)
+{
+	__flush_tlb_others(cpumask, info);
+}
+
 /*
  * See Documentation/x86/tlb.rst for details.  We choose 33
  * because it is large enough to cover the vast majority (at
@@ -784,7 +966,7 @@ static void do_kernel_range_flush(void *info)
 
 	/* flush range by one by one 'invlpg' */
 	for (addr = f->start; addr < f->end; addr += PAGE_SIZE)
-		__flush_tlb_one_kernel(addr);
+		flush_tlb_one_kernel(addr);
 }
 
 void flush_tlb_kernel_range(unsigned long start, unsigned long end)
@@ -806,6 +988,164 @@ void flush_tlb_kernel_range(unsigned long start, unsigned long end)
 	}
 }
 
+/*
+ * This can be used from process context to figure out what the value of
+ * CR3 is without needing to do a (slow) __read_cr3().
+ *
+ * It's intended to be used for code like KVM that sneakily changes CR3
+ * and needs to restore it.  It needs to be used very carefully.
+ */
+unsigned long __get_current_cr3_fast(void)
+{
+	unsigned long cr3 = build_cr3(this_cpu_read(cpu_tlbstate.loaded_mm)->pgd,
+		this_cpu_read(cpu_tlbstate.loaded_mm_asid));
+
+	/* For now, be very restrictive about when this can be called. */
+	VM_WARN_ON(in_nmi() || preemptible());
+
+	VM_BUG_ON(cr3 != __read_cr3());
+	return cr3;
+}
+EXPORT_SYMBOL_GPL(__get_current_cr3_fast);
+
+/*
+ * Flush one page in the kernel mapping
+ */
+void flush_tlb_one_kernel(unsigned long addr)
+{
+	count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ONE);
+
+	/*
+	 * If PTI is off, then __flush_tlb_one_user() is just INVLPG or its
+	 * paravirt equivalent.  Even with PCID, this is sufficient: we only
+	 * use PCID if we also use global PTEs for the kernel mapping, and
+	 * INVLPG flushes global translations across all address spaces.
+	 *
+	 * If PTI is on, then the kernel is mapped with non-global PTEs, and
+	 * __flush_tlb_one_user() will flush the given address for the current
+	 * kernel address space and for its usermode counterpart, but it does
+	 * not flush it for other address spaces.
+	 */
+	flush_tlb_one_user(addr);
+
+	if (!static_cpu_has(X86_FEATURE_PTI))
+		return;
+
+	/*
+	 * See above.  We need to propagate the flush to all other address
+	 * spaces.  In principle, we only need to propagate it to kernelmode
+	 * address spaces, but the extra bookkeeping we would need is not
+	 * worth it.
+	 */
+	this_cpu_write(cpu_tlbstate.invalidate_other, true);
+}
+
+/*
+ * Flush one page in the user mapping
+ */
+STATIC_NOPV void native_flush_tlb_one_user(unsigned long addr)
+{
+	u32 loaded_mm_asid = this_cpu_read(cpu_tlbstate.loaded_mm_asid);
+
+	asm volatile("invlpg (%0)" ::"r" (addr) : "memory");
+
+	if (!static_cpu_has(X86_FEATURE_PTI))
+		return;
+
+	/*
+	 * Some platforms #GP if we call invpcid(type=1/2) before CR4.PCIDE=1.
+	 * Just use invalidate_user_asid() in case we are called early.
+	 */
+	if (!this_cpu_has(X86_FEATURE_INVPCID_SINGLE))
+		invalidate_user_asid(loaded_mm_asid);
+	else
+		invpcid_flush_one(user_pcid(loaded_mm_asid), addr);
+}
+
+void flush_tlb_one_user(unsigned long addr)
+{
+	__flush_tlb_one_user(addr);
+}
+
+/*
+ * Flush everything
+ */
+STATIC_NOPV void native_flush_tlb_global(void)
+{
+	unsigned long cr4, flags;
+
+	if (static_cpu_has(X86_FEATURE_INVPCID)) {
+		/*
+		 * Using INVPCID is considerably faster than a pair of writes
+		 * to CR4 sandwiched inside an IRQ flag save/restore.
+		 *
+		 * Note, this works with CR4.PCIDE=0 or 1.
+		 */
+		invpcid_flush_all();
+		return;
+	}
+
+	/*
+	 * Read-modify-write to CR4 - protect it from preemption and
+	 * from interrupts. (Use the raw variant because this code can
+	 * be called from deep inside debugging code.)
+	 */
+	raw_local_irq_save(flags);
+
+	cr4 = this_cpu_read(cpu_tlbstate.cr4);
+	/* toggle PGE */
+	native_write_cr4(cr4 ^ X86_CR4_PGE);
+	/* write old PGE again and flush TLBs */
+	native_write_cr4(cr4);
+
+	raw_local_irq_restore(flags);
+}
+
+/*
+ * Flush the entire current user mapping
+ */
+STATIC_NOPV void native_flush_tlb_local(void)
+{
+	/*
+	 * Preemption or interrupts must be disabled to protect the access
+	 * to the per CPU variable and to prevent being preempted between
+	 * read_cr3() and write_cr3().
+	 */
+	WARN_ON_ONCE(preemptible());
+
+	invalidate_user_asid(this_cpu_read(cpu_tlbstate.loaded_mm_asid));
+
+	/* If current->mm == NULL then the read_cr3() "borrows" an mm */
+	native_write_cr3(__native_read_cr3());
+}
+
+void flush_tlb_local(void)
+{
+	__flush_tlb_local();
+}
+
+/*
+ * Flush everything
+ */
+void __flush_tlb_all(void)
+{
+	/*
+	 * This is to catch users with enabled preemption and the PGE feature
+	 * and don't trigger the warning in __native_flush_tlb().
+	 */
+	VM_WARN_ON_ONCE(preemptible());
+
+	if (boot_cpu_has(X86_FEATURE_PGE)) {
+		__flush_tlb_global();
+	} else {
+		/*
+		 * !PGE -> !PCID (setup_pcid()), thus every flush is total.
+		 */
+		flush_tlb_local();
+	}
+}
+EXPORT_SYMBOL_GPL(__flush_tlb_all);
+
 /*
  * arch_tlbbatch_flush() performs a full TLB flush regardless of the active mm.
  * This means that the 'struct flush_tlb_info' that describes which mappings to
@@ -837,6 +1177,38 @@ void arch_tlbbatch_flush(struct arch_tlbflush_unmap_batch *batch)
 	put_cpu();
 }
 
+/*
+ * Blindly accessing user memory from NMI context can be dangerous
+ * if we're in the middle of switching the current user task or
+ * switching the loaded mm.  It can also be dangerous if we
+ * interrupted some kernel code that was temporarily using a
+ * different mm.
+ */
+bool nmi_uaccess_okay(void)
+{
+	struct mm_struct *loaded_mm = this_cpu_read(cpu_tlbstate.loaded_mm);
+	struct mm_struct *current_mm = current->mm;
+
+	VM_WARN_ON_ONCE(!loaded_mm);
+
+	/*
+	 * The condition we want to check is
+	 * current_mm->pgd == __va(read_cr3_pa()).  This may be slow, though,
+	 * if we're running in a VM with shadow paging, and nmi_uaccess_okay()
+	 * is supposed to be reasonably fast.
+	 *
+	 * Instead, we check the almost equivalent but somewhat conservative
+	 * condition below, and we rely on the fact that switch_mm_irqs_off()
+	 * sets loaded_mm to LOADED_MM_SWITCHING before writing to CR3.
+	 */
+	if (loaded_mm != current_mm)
+		return false;
+
+	VM_WARN_ON_ONCE(current_mm->pgd != __va(read_cr3_pa()));
+
+	return true;
+}
+
 static ssize_t tlbflush_read_file(struct file *file, char __user *user_buf,
 			     size_t count, loff_t *ppos)
 {

arch/x86/platform/uv/tlb_uv.c

@@ -293,10 +293,10 @@ static void bau_process_message(struct msg_desc *mdp, struct bau_control *bcp,
 	 * This must be a normal message, or retry of a normal message
 	 */
 	if (msg->address == TLB_FLUSH_ALL) {
-		local_flush_tlb();
+		flush_tlb_local();
 		stat->d_alltlb++;
 	} else {
-		__flush_tlb_one_user(msg->address);
+		flush_tlb_one_user(msg->address);
 		stat->d_onetlb++;
 	}
 	stat->d_requestee++;

drivers/xen/privcmd.c

@@ -27,7 +27,6 @@
 
 #include <asm/pgalloc.h>
 #include <asm/pgtable.h>
-#include <asm/tlb.h>
 #include <asm/xen/hypervisor.h>
 #include <asm/xen/hypercall.h>