Commit f6259dea authored by Simon Arlott's avatar Simon Arlott Committed by Herbert Xu

[CRYPTO] padlock: Remove pointless padlock module

When this is compiled in it is run too early to do anything useful:
[    6.052000] padlock: No VIA PadLock drivers have been loaded.
[    6.052000] padlock: Using VIA PadLock ACE for AES algorithm.
[    6.052000] padlock: Using VIA PadLock ACE for SHA1/SHA256 algorithms.

When it's a module it isn't doing anything special, the same functionality 
can be provided in userspace by "probeall padlock padlock-aes padlock-sha" 
in modules.conf if it is required.
Signed-off-by: default avatarSimon Arlott <simon@fire.lp0.eu>
Cc: Michal Ludvig <michal@logix.cz>
Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
parent e196d625
menu "Hardware crypto devices" menu "Hardware crypto devices"
config CRYPTO_DEV_PADLOCK config CRYPTO_DEV_PADLOCK
tristate "Support for VIA PadLock ACE" bool "Support for VIA PadLock ACE"
depends on X86_32 depends on X86_32
select CRYPTO_ALGAPI select CRYPTO_ALGAPI
default m default y
help help
Some VIA processors come with an integrated crypto engine Some VIA processors come with an integrated crypto engine
(so called VIA PadLock ACE, Advanced Cryptography Engine) (so called VIA PadLock ACE, Advanced Cryptography Engine)
...@@ -14,16 +14,6 @@ config CRYPTO_DEV_PADLOCK ...@@ -14,16 +14,6 @@ config CRYPTO_DEV_PADLOCK
The instructions are used only when the CPU supports them. The instructions are used only when the CPU supports them.
Otherwise software encryption is used. Otherwise software encryption is used.
Selecting M for this option will compile a helper module
padlock.ko that should autoload all below configured
algorithms. Don't worry if your hardware does not support
some or all of them. In such case padlock.ko will
simply write a single line into the kernel log informing
about its failure but everything will keep working fine.
If you are unsure, say M. The compiled module will be
called padlock.ko
config CRYPTO_DEV_PADLOCK_AES config CRYPTO_DEV_PADLOCK_AES
tristate "PadLock driver for AES algorithm" tristate "PadLock driver for AES algorithm"
depends on CRYPTO_DEV_PADLOCK depends on CRYPTO_DEV_PADLOCK
...@@ -55,7 +45,7 @@ source "arch/s390/crypto/Kconfig" ...@@ -55,7 +45,7 @@ source "arch/s390/crypto/Kconfig"
config CRYPTO_DEV_GEODE config CRYPTO_DEV_GEODE
tristate "Support for the Geode LX AES engine" tristate "Support for the Geode LX AES engine"
depends on CRYPTO && X86_32 && PCI depends on X86_32 && PCI
select CRYPTO_ALGAPI select CRYPTO_ALGAPI
select CRYPTO_BLKCIPHER select CRYPTO_BLKCIPHER
default m default m
......
obj-$(CONFIG_CRYPTO_DEV_PADLOCK) += padlock.o
obj-$(CONFIG_CRYPTO_DEV_PADLOCK_AES) += padlock-aes.o obj-$(CONFIG_CRYPTO_DEV_PADLOCK_AES) += padlock-aes.o
obj-$(CONFIG_CRYPTO_DEV_PADLOCK_SHA) += padlock-sha.o obj-$(CONFIG_CRYPTO_DEV_PADLOCK_SHA) += padlock-sha.o
obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o obj-$(CONFIG_CRYPTO_DEV_GEODE) += geode-aes.o
/*
* Cryptographic API.
*
* Support for VIA PadLock hardware crypto engine.
*
* Copyright (c) 2006 Michal Ludvig <michal@logix.cz>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/crypto.h>
#include <linux/cryptohash.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/scatterlist.h>
#include "padlock.h"
static int __init padlock_init(void)
{
int success = 0;
if (crypto_has_cipher("aes-padlock", 0, 0))
success++;
if (crypto_has_hash("sha1-padlock", 0, 0))
success++;
if (crypto_has_hash("sha256-padlock", 0, 0))
success++;
if (!success) {
printk(KERN_WARNING PFX "No VIA PadLock drivers have been loaded.\n");
return -ENODEV;
}
printk(KERN_NOTICE PFX "%d drivers are available.\n", success);
return 0;
}
static void __exit padlock_fini(void)
{
}
module_init(padlock_init);
module_exit(padlock_fini);
MODULE_DESCRIPTION("Load all configured PadLock algorithms.");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michal Ludvig");
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment