iommu/arm-smmu: Clean up early-probing workarounds

Now that the appropriate ordering is enforced via probe-deferral of
masters in core code, rip it all out and bask in the simplicity.
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
[Sricharan: Rebased on top of ACPI IORT SMMU series]
Signed-off-by: Sricharan R <sricharan@codeaurora.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>

drivers/iommu/arm-smmu-v3.c

@@ -2763,51 +2763,9 @@ static struct platform_driver arm_smmu_driver = {
 	.probe	= arm_smmu_device_probe,
 	.remove	= arm_smmu_device_remove,
 };
+module_platform_driver(arm_smmu_driver);
 
-static int __init arm_smmu_init(void)
-{
-	static bool registered;
-	int ret = 0;
-
-	if (!registered) {
-		ret = platform_driver_register(&arm_smmu_driver);
-		registered = !ret;
-	}
-	return ret;
-}
-
-static void __exit arm_smmu_exit(void)
-{
-	return platform_driver_unregister(&arm_smmu_driver);
-}
-
-subsys_initcall(arm_smmu_init);
-module_exit(arm_smmu_exit);
-
-static int __init arm_smmu_of_init(struct device_node *np)
-{
-	int ret = arm_smmu_init();
-
-	if (ret)
-		return ret;
-
-	if (!of_platform_device_create(np, NULL, platform_bus_type.dev_root))
-		return -ENODEV;
-
-	return 0;
-}
-IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", arm_smmu_of_init);
-
-#ifdef CONFIG_ACPI
-static int __init acpi_smmu_v3_init(struct acpi_table_header *table)
-{
-	if (iort_node_match(ACPI_IORT_NODE_SMMU_V3))
-		return arm_smmu_init();
-
-	return 0;
-}
-IORT_ACPI_DECLARE(arm_smmu_v3, ACPI_SIG_IORT, acpi_smmu_v3_init);
-#endif
+IOMMU_OF_DECLARE(arm_smmuv3, "arm,smmu-v3", NULL);
 
 MODULE_DESCRIPTION("IOMMU API for ARM architected SMMUv3 implementations");
 MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");

drivers/iommu/arm-smmu.c

@@ -2077,6 +2077,23 @@ static int arm_smmu_device_dt_probe(struct platform_device *pdev,
 	return 0;
 }
 
+static void arm_smmu_bus_init(void)
+{
+	/* Oh, for a proper bus abstraction */
+	if (!iommu_present(&platform_bus_type))
+		bus_set_iommu(&platform_bus_type, &arm_smmu_ops);
+#ifdef CONFIG_ARM_AMBA
+	if (!iommu_present(&amba_bustype))
+		bus_set_iommu(&amba_bustype, &arm_smmu_ops);
+#endif
+#ifdef CONFIG_PCI
+	if (!iommu_present(&pci_bus_type)) {
+		pci_request_acs();
+		bus_set_iommu(&pci_bus_type, &arm_smmu_ops);
+	}
+#endif
+}
+
 static int arm_smmu_device_probe(struct platform_device *pdev)
 {
 	struct resource *res;
@@ -2182,21 +2199,30 @@ static int arm_smmu_device_probe(struct platform_device *pdev)
 	arm_smmu_device_reset(smmu);
 	arm_smmu_test_smr_masks(smmu);
 
-	/* Oh, for a proper bus abstraction */
-	if (!iommu_present(&platform_bus_type))
-		bus_set_iommu(&platform_bus_type, &arm_smmu_ops);
-#ifdef CONFIG_ARM_AMBA
-	if (!iommu_present(&amba_bustype))
-		bus_set_iommu(&amba_bustype, &arm_smmu_ops);
-#endif
-#ifdef CONFIG_PCI
-	if (!iommu_present(&pci_bus_type)) {
-		pci_request_acs();
-		bus_set_iommu(&pci_bus_type, &arm_smmu_ops);
-	}
-#endif
+	/*
+	 * For ACPI and generic DT bindings, an SMMU will be probed before
+	 * any device which might need it, so we want the bus ops in place
+	 * ready to handle default domain setup as soon as any SMMU exists.
+	 */
+	if (!using_legacy_binding)
+		arm_smmu_bus_init();
+
+	return 0;
+}
+
+/*
+ * With the legacy DT binding in play, though, we have no guarantees about
+ * probe order, but then we're also not doing default domains, so we can
+ * delay setting bus ops until we're sure every possible SMMU is ready,
+ * and that way ensure that no add_device() calls get missed.
+ */
+static int arm_smmu_legacy_bus_init(void)
+{
+	if (using_legacy_binding)
+		arm_smmu_bus_init();
 	return 0;
 }
+device_initcall_sync(arm_smmu_legacy_bus_init);
 
 static int arm_smmu_device_remove(struct platform_device *pdev)
 {
@@ -2221,56 +2247,14 @@ static struct platform_driver arm_smmu_driver = {
 	.probe	= arm_smmu_device_probe,
 	.remove	= arm_smmu_device_remove,
 };
-
-static int __init arm_smmu_init(void)
-{
-	static bool registered;
-	int ret = 0;
-
-	if (!registered) {
-		ret = platform_driver_register(&arm_smmu_driver);
-		registered = !ret;
-	}
-	return ret;
-}
-
-static void __exit arm_smmu_exit(void)
-{
-	return platform_driver_unregister(&arm_smmu_driver);
-}
-
-subsys_initcall(arm_smmu_init);
-module_exit(arm_smmu_exit);
-
-static int __init arm_smmu_of_init(struct device_node *np)
-{
-	int ret = arm_smmu_init();
-
-	if (ret)
-		return ret;
-
-	if (!of_platform_device_create(np, NULL, platform_bus_type.dev_root))
-		return -ENODEV;
-
-	return 0;
-}
-IOMMU_OF_DECLARE(arm_smmuv1, "arm,smmu-v1", arm_smmu_of_init);
-IOMMU_OF_DECLARE(arm_smmuv2, "arm,smmu-v2", arm_smmu_of_init);
-IOMMU_OF_DECLARE(arm_mmu400, "arm,mmu-400", arm_smmu_of_init);
-IOMMU_OF_DECLARE(arm_mmu401, "arm,mmu-401", arm_smmu_of_init);
-IOMMU_OF_DECLARE(arm_mmu500, "arm,mmu-500", arm_smmu_of_init);
-IOMMU_OF_DECLARE(cavium_smmuv2, "cavium,smmu-v2", arm_smmu_of_init);
-
-#ifdef CONFIG_ACPI
-static int __init arm_smmu_acpi_init(struct acpi_table_header *table)
-{
-	if (iort_node_match(ACPI_IORT_NODE_SMMU))
-		return arm_smmu_init();
-
-	return 0;
-}
-IORT_ACPI_DECLARE(arm_smmu, ACPI_SIG_IORT, arm_smmu_acpi_init);
-#endif
+module_platform_driver(arm_smmu_driver);
+
+IOMMU_OF_DECLARE(arm_smmuv1, "arm,smmu-v1", NULL);
+IOMMU_OF_DECLARE(arm_smmuv2, "arm,smmu-v2", NULL);
+IOMMU_OF_DECLARE(arm_mmu400, "arm,mmu-400", NULL);
+IOMMU_OF_DECLARE(arm_mmu401, "arm,mmu-401", NULL);
+IOMMU_OF_DECLARE(arm_mmu500, "arm,mmu-500", NULL);
+IOMMU_OF_DECLARE(cavium_smmuv2, "cavium,smmu-v2", NULL);
 
 MODULE_DESCRIPTION("IOMMU API for ARM architected SMMU implementations");
 MODULE_AUTHOR("Will Deacon <will.deacon@arm.com>");