Commit f751daa4 authored by James Morse's avatar James Morse Committed by Catalin Marinas

arm64: Unconditionally enable IESB on exception entry/return for firmware-first

ARM v8.2 has a feature to add implicit error synchronization barriers
whenever the CPU enters or returns from an exception level. Add this to the
features we always enable. CPUs that don't support this feature will treat
the bit as RES0.

This feature causes RAS errors that are not yet visible to software to
become pending SErrors. We expect to have firmware-first RAS support
so synchronised RAS errors will be take immediately to EL3.
Any system without firmware-first handling of errors will take the SError
either immediatly after exception return, or when we unmask SError after
entry.S's work.

Adding IESB to the ELx flags causes it to be enabled by KVM and kexec
too.

Platform level RAS support may require additional firmware support.

Cc: Christoffer Dall <christoffer.dall@linaro.org>
Suggested-by: default avatarWill Deacon <will.deacon@arm.com>
Link: https://www.spinics.net/lists/kvm-arm/msg28192.htmlAcked-by: default avatarMarc Zyngier <marc.zyngier@arm.com>
Signed-off-by: default avatarJames Morse <james.morse@arm.com>
Signed-off-by: default avatarCatalin Marinas <catalin.marinas@arm.com>
parent 6bf0dcfd
......@@ -399,6 +399,7 @@
/* Common SCTLR_ELx flags. */
#define SCTLR_ELx_EE (1 << 25)
#define SCTLR_ELx_IESB (1 << 21)
#define SCTLR_ELx_WXN (1 << 19)
#define SCTLR_ELx_I (1 << 12)
#define SCTLR_ELx_SA (1 << 3)
......@@ -406,8 +407,8 @@
#define SCTLR_ELx_A (1 << 1)
#define SCTLR_ELx_M 1
#define SCTLR_ELx_FLAGS (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \
SCTLR_ELx_SA | SCTLR_ELx_I)
#define SCTLR_ELx_FLAGS (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \
SCTLR_ELx_SA | SCTLR_ELx_I | SCTLR_ELx_IESB)
/* SCTLR_EL2 specific flags. */
#define SCTLR_EL2_RES1 ((1 << 4) | (1 << 5) | (1 << 11) | (1 << 16) | \
......@@ -415,8 +416,8 @@
(1 << 29))
#define SCTLR_EL2_RES0 ((1 << 6) | (1 << 7) | (1 << 8) | (1 << 9) | \
(1 << 10) | (1 << 13) | (1 << 14) | (1 << 15) | \
(1 << 17) | (1 << 20) | (1 << 21) | (1 << 24) | \
(1 << 26) | (1 << 27) | (1 << 30) | (1 << 31))
(1 << 17) | (1 << 20) | (1 << 24) | (1 << 26) | \
(1 << 27) | (1 << 30) | (1 << 31))
#ifdef CONFIG_CPU_BIG_ENDIAN
#define ENDIAN_SET_EL2 SCTLR_ELx_EE
......@@ -427,7 +428,7 @@
#endif
/* SCTLR_EL2 value used for the hyp-stub */
#define SCTLR_EL2_SET (ENDIAN_SET_EL2 | SCTLR_EL2_RES1)
#define SCTLR_EL2_SET (SCTLR_ELx_IESB | ENDIAN_SET_EL2 | SCTLR_EL2_RES1)
#define SCTLR_EL2_CLEAR (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \
SCTLR_ELx_SA | SCTLR_ELx_I | SCTLR_ELx_WXN | \
ENDIAN_CLEAR_EL2 | SCTLR_EL2_RES0)
......@@ -453,7 +454,7 @@
#define SCTLR_EL1_RES1 ((1 << 11) | (1 << 20) | (1 << 22) | (1 << 28) | \
(1 << 29))
#define SCTLR_EL1_RES0 ((1 << 6) | (1 << 10) | (1 << 13) | (1 << 17) | \
(1 << 21) | (1 << 27) | (1 << 30) | (1 << 31))
(1 << 27) | (1 << 30) | (1 << 31))
#ifdef CONFIG_CPU_BIG_ENDIAN
#define ENDIAN_SET_EL1 (SCTLR_EL1_E0E | SCTLR_ELx_EE)
......@@ -466,8 +467,8 @@
#define SCTLR_EL1_SET (SCTLR_ELx_M | SCTLR_ELx_C | SCTLR_ELx_SA |\
SCTLR_EL1_SA0 | SCTLR_EL1_SED | SCTLR_ELx_I |\
SCTLR_EL1_DZE | SCTLR_EL1_UCT | SCTLR_EL1_NTWI |\
SCTLR_EL1_NTWE | SCTLR_EL1_SPAN | ENDIAN_SET_EL1 |\
SCTLR_EL1_UCI | SCTLR_EL1_RES1)
SCTLR_EL1_NTWE | SCTLR_ELx_IESB | SCTLR_EL1_SPAN |\
ENDIAN_SET_EL1 | SCTLR_EL1_UCI | SCTLR_EL1_RES1)
#define SCTLR_EL1_CLEAR (SCTLR_ELx_A | SCTLR_EL1_CP15BEN | SCTLR_EL1_ITD |\
SCTLR_EL1_UMA | SCTLR_ELx_WXN | ENDIAN_CLEAR_EL1 |\
SCTLR_EL1_RES0)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment