Commit f8c08524 authored by Hans Verkuil's avatar Hans Verkuil Committed by Mauro Carvalho Chehab

[media] radio-gemtek: Convert to radio-isa

Tested with actual hardware (up to two cards) and the Keene USB FM Transmitter.
Signed-off-by: default avatarHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 3088fba8
...@@ -276,6 +276,7 @@ config RADIO_AZTECH_PORT ...@@ -276,6 +276,7 @@ config RADIO_AZTECH_PORT
config RADIO_GEMTEK config RADIO_GEMTEK
tristate "GemTek Radio card (or compatible) support" tristate "GemTek Radio card (or compatible) support"
depends on ISA && VIDEO_V4L2 depends on ISA && VIDEO_V4L2
select RADIO_ISA
---help--- ---help---
Choose Y here if you have this FM radio card, and then fill in the Choose Y here if you have this FM radio card, and then fill in the
I/O port address and settings below. The following cards either have I/O port address and settings below. The following cards either have
...@@ -285,23 +286,21 @@ config RADIO_GEMTEK ...@@ -285,23 +286,21 @@ config RADIO_GEMTEK
- Typhoon Radio card (some models) - Typhoon Radio card (some models)
- Hama Radio card - Hama Radio card
In order to control your radio card, you will need to use programs
that are compatible with the Video For Linux API. Information on
this API and pointers to "v4l" programs may be found at
<file:Documentation/video4linux/API.html>.
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called radio-gemtek. module will be called radio-gemtek.
config RADIO_GEMTEK_PORT config RADIO_GEMTEK_PORT
hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0c24c or 0x28c)" hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)"
depends on RADIO_GEMTEK=y depends on RADIO_GEMTEK=y
default "34c" default "34c"
help help
Enter either 0x20c, 0x30c, 0x24c or 0x34c here. The card default is Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The
0x34c, if you haven't changed the jumper setting on the card. On card default is 0x34c, if you haven't changed the jumper setting
Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O on the card.
On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O
port is 0x20c, 0x248 or 0x28c. port is 0x20c, 0x248 or 0x28c.
If automatic I/O port probing is enabled this port will be used only If automatic I/O port probing is enabled this port will be used only
in case of automatic probing failure, ie. as a fallback. in case of automatic probing failure, ie. as a fallback.
......
This diff is collapsed.
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment