iio: impedance-analyzer: New driver for AD5933/4 Impedance Converter, Network Analyzer

The AD5933 is a high precision impedance converter system solution
that combines an on-board frequency generator with a 12-bit, 1 MSPS,
analog-to-digital converter (ADC). The frequency generator allows an
external complex impedance to be excited with a known frequency.

The response signal from the impedance is sampled by the on-board ADC
and a discrete Fourier transform (DFT) is processed by an on-chip DSP engine.
The DFT algorithm returns a real (R) and imaginary (I) data-word at each
output frequency.

Changes since V1:

Apply list review feedback:
Consistently use poll_time_jiffies.
Use be|le cpu endian helpers where applicable.
Add various comments.

Changes since V2:

Fix KernelVersion tag in Documentation.
Declare ad5933_default_pdata static.
Fix typos.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/iio/Documentation/sysfs-bus-iio-impedance-analyzer-ad5933

+What:		/sys/bus/iio/devices/iio:deviceX/outY_freq_start
+KernelVersion:	3.1.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Frequency sweep start frequency in Hz.
+
+What:		/sys/bus/iio/devices/iio:deviceX/outY_freq_increment
+KernelVersion:	3.1.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Frequency increment in Hz (step size) between consecutive
+		frequency points along the sweep.
+
+What:		/sys/bus/iio/devices/iio:deviceX/outY_freq_points
+KernelVersion:	3.1.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Number of frequency points (steps) in the frequency sweep.
+		This value, in conjunction with the outY_freq_start and the
+		outY_freq_increment, determines the frequency sweep range
+		for the sweep operation.
+
+What:		/sys/bus/iio/devices/iio:deviceX/outY_settling_cycles
+KernelVersion:	3.1.0
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Number of output excitation cycles (settling time cycles)
+		that are allowed to pass through the unknown impedance,
+		after each frequency increment, and before the ADC is triggered
+		to perform a conversion sequence of the response signal.

drivers/staging/iio/Kconfig

@@ -62,6 +62,7 @@ source "drivers/staging/iio/addac/Kconfig"
 source "drivers/staging/iio/dac/Kconfig"
 source "drivers/staging/iio/dds/Kconfig"
 source "drivers/staging/iio/gyro/Kconfig"
+source "drivers/staging/iio/impedance-analyzer/Kconfig"
 source "drivers/staging/iio/imu/Kconfig"
 source "drivers/staging/iio/light/Kconfig"
 source "drivers/staging/iio/magnetometer/Kconfig"

drivers/staging/iio/Makefile

@@ -16,6 +16,7 @@ obj-y += addac/
 obj-y += dac/
 obj-y += dds/
 obj-y += gyro/
+obj-y += impedance-analyzer/
 obj-y += imu/
 obj-y += light/
 obj-y += magnetometer/

drivers/staging/iio/impedance-analyzer/Kconfig

+#
+# Impedance Converter, Network Analyzer drivers
+#
+comment "Network Analyzer, Impedance Converters"
+
+config AD5933
+	tristate "Analog Devices AD5933, AD5934 driver"
+	depends on I2C
+	select IIO_RING_BUFFER
+	select IIO_SW_RING
+	help
+	  Say yes here to build support for Analog Devices Impedance Converter,
+	  Network Analyzer, AD5933/4, provides direct access via sysfs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad5933.

drivers/staging/iio/impedance-analyzer/Makefile

+#
+# Makefile for Impedance Converter, Network Analyzer drivers
+#
+
+obj-$(CONFIG_AD5933) += ad5933.o

drivers/staging/iio/impedance-analyzer/ad5933.c

+/*
+ * AD5933 AD5934 Impedance Converter, Network Analyzer
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/sysfs.h>
+#include <linux/i2c.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <asm/div64.h>
+
+#include "../iio.h"
+#include "../sysfs.h"
+#include "../ring_generic.h"
+#include "../ring_sw.h"
+
+#include "ad5933.h"
+
+/* AD5933/AD5934 Registers */
+#define AD5933_REG_CONTROL_HB		0x80	/* R/W, 2 bytes */
+#define AD5933_REG_CONTROL_LB		0x81	/* R/W, 2 bytes */
+#define AD5933_REG_FREQ_START		0x82	/* R/W, 3 bytes */
+#define AD5933_REG_FREQ_INC		0x85	/* R/W, 3 bytes */
+#define AD5933_REG_INC_NUM		0x88	/* R/W, 2 bytes, 9 bit */
+#define AD5933_REG_SETTLING_CYCLES	0x8A	/* R/W, 2 bytes */
+#define AD5933_REG_STATUS		0x8F	/* R, 1 byte */
+#define AD5933_REG_TEMP_DATA		0x92	/* R, 2 bytes*/
+#define AD5933_REG_REAL_DATA		0x94	/* R, 2 bytes*/
+#define AD5933_REG_IMAG_DATA		0x96	/* R, 2 bytes*/
+
+/* AD5933_REG_CONTROL_HB Bits */
+#define AD5933_CTRL_INIT_START_FREQ	(0x1 << 4)
+#define AD5933_CTRL_START_SWEEP		(0x2 << 4)
+#define AD5933_CTRL_INC_FREQ		(0x3 << 4)
+#define AD5933_CTRL_REPEAT_FREQ		(0x4 << 4)
+#define AD5933_CTRL_MEASURE_TEMP	(0x9 << 4)
+#define AD5933_CTRL_POWER_DOWN		(0xA << 4)
+#define AD5933_CTRL_STANDBY		(0xB << 4)
+
+#define AD5933_CTRL_RANGE_2000mVpp	(0x0 << 1)
+#define AD5933_CTRL_RANGE_200mVpp	(0x1 << 1)
+#define AD5933_CTRL_RANGE_400mVpp	(0x2 << 1)
+#define AD5933_CTRL_RANGE_1000mVpp	(0x3 << 1)
+#define AD5933_CTRL_RANGE(x)		((x) << 1)
+
+#define AD5933_CTRL_PGA_GAIN_1		(0x1 << 0)
+#define AD5933_CTRL_PGA_GAIN_5		(0x0 << 0)
+
+/* AD5933_REG_CONTROL_LB Bits */
+#define AD5933_CTRL_RESET		(0x1 << 4)
+#define AD5933_CTRL_INT_SYSCLK		(0x0 << 3)
+#define AD5933_CTRL_EXT_SYSCLK		(0x1 << 3)
+
+/* AD5933_REG_STATUS Bits */
+#define AD5933_STAT_TEMP_VALID		(0x1 << 0)
+#define AD5933_STAT_DATA_VALID		(0x1 << 1)
+#define AD5933_STAT_SWEEP_DONE		(0x1 << 2)
+
+/* I2C Block Commands */
+#define AD5933_I2C_BLOCK_WRITE		0xA0
+#define AD5933_I2C_BLOCK_READ		0xA1
+#define AD5933_I2C_ADDR_POINTER		0xB0
+
+/* Device Specs */
+#define AD5933_INT_OSC_FREQ_Hz		16776000
+#define AD5933_MAX_OUTPUT_FREQ_Hz	100000
+#define AD5933_MAX_RETRIES		100
+
+#define AD5933_OUT_RANGE		1
+#define AD5933_OUT_RANGE_AVAIL		2
+#define AD5933_OUT_SETTLING_CYCLES	3
+#define AD5933_IN_PGA_GAIN		4
+#define AD5933_IN_PGA_GAIN_AVAIL	5
+#define AD5933_FREQ_POINTS		6
+
+#define AD5933_POLL_TIME_ms		10
+#define AD5933_INIT_EXCITATION_TIME_ms	100
+
+struct ad5933_state {
+	struct i2c_client		*client;
+	struct regulator		*reg;
+	struct ad5933_platform_data	*pdata;
+	struct delayed_work		work;
+	unsigned long			mclk_hz;
+	unsigned char			ctrl_hb;
+	unsigned char			ctrl_lb;
+	unsigned			range_avail[4];
+	unsigned short			vref_mv;
+	unsigned short			settling_cycles;
+	unsigned short			freq_points;
+	unsigned			freq_start;
+	unsigned			freq_inc;
+	unsigned			state;
+	unsigned			poll_time_jiffies;
+};
+
+static struct ad5933_platform_data ad5933_default_pdata  = {
+	.vref_mv = 3300,
+};
+
+static struct iio_chan_spec ad5933_channels[] = {
+	IIO_CHAN(IIO_TEMP, 0, 1, 1, NULL, 0, 0, 0,
+		 0, AD5933_REG_TEMP_DATA, IIO_ST('s', 14, 16, 0), 0),
+	/* Ring Channels */
+	IIO_CHAN(IIO_IN, 0, 1, 0, "real_raw", 0, 0,
+		 (1 << IIO_CHAN_INFO_SCALE_SEPARATE),
+		 AD5933_REG_REAL_DATA, 0, IIO_ST('s', 16, 16, 0), 0),
+	IIO_CHAN(IIO_IN, 0, 1, 0, "imag_raw", 0, 0,
+		 (1 << IIO_CHAN_INFO_SCALE_SEPARATE),
+		 AD5933_REG_IMAG_DATA, 1, IIO_ST('s', 16, 16, 0), 0),
+};
+
+static int ad5933_i2c_write(struct i2c_client *client,
+			      u8 reg, u8 len, u8 *data)
+{
+	int ret;
+
+	while (len--) {
+		ret = i2c_smbus_write_byte_data(client, reg++, *data++);
+		if (ret < 0) {
+			dev_err(&client->dev, "I2C write error\n");
+			return ret;
+		}
+	}
+	return 0;
+}
+
+static int ad5933_i2c_read(struct i2c_client *client,
+			      u8 reg, u8 len, u8 *data)
+{
+	int ret;
+
+	while (len--) {
+		ret = i2c_smbus_read_byte_data(client, reg++);
+		if (ret < 0) {
+			dev_err(&client->dev, "I2C read error\n");
+			return ret;
+		}
+		*data++ = ret;
+	}
+	return 0;
+}
+
+static int ad5933_cmd(struct ad5933_state *st, unsigned char cmd)
+{
+	unsigned char dat = st->ctrl_hb | cmd;
+
+	return ad5933_i2c_write(st->client,
+			AD5933_REG_CONTROL_HB, 1, &dat);
+}
+
+static int ad5933_reset(struct ad5933_state *st)
+{
+	unsigned char dat = st->ctrl_lb | AD5933_CTRL_RESET;
+	return ad5933_i2c_write(st->client,
+			AD5933_REG_CONTROL_LB, 1, &dat);
+}
+
+static int ad5933_wait_busy(struct ad5933_state *st, unsigned char event)
+{
+	unsigned char val, timeout = AD5933_MAX_RETRIES;
+	int ret;
+
+	while (timeout--) {
+		ret =  ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &val);
+		if (ret < 0)
+			return ret;
+		if (val & event)
+			return val;
+		cpu_relax();
+		mdelay(1);
+	}
+
+	return -EAGAIN;
+}
+
+static int ad5933_set_freq(struct ad5933_state *st,
+			   unsigned reg, unsigned long freq)
+{
+	unsigned long long freqreg;
+	union {
+		u32 d32;
+		u8 d8[4];
+	} dat;
+
+	freqreg = (u64) freq * (u64) (1 << 27);
+	do_div(freqreg, st->mclk_hz / 4);
+
+	switch (reg) {
+	case AD5933_REG_FREQ_START:
+		st->freq_start = freq;
+		break;
+	case AD5933_REG_FREQ_INC:
+		st->freq_inc = freq;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	dat.d32 = cpu_to_be32(freqreg);
+	return ad5933_i2c_write(st->client, reg, 3, &dat.d8[1]);
+}
+
+static int ad5933_setup(struct ad5933_state *st)
+{
+	unsigned short dat;
+	int ret;
+
+	ret = ad5933_reset(st);
+	if (ret < 0)
+		return ret;
+
+	ret = ad5933_set_freq(st, AD5933_REG_FREQ_START, 10000);
+	if (ret < 0)
+		return ret;
+
+	ret = ad5933_set_freq(st, AD5933_REG_FREQ_INC, 200);
+	if (ret < 0)
+		return ret;
+
+	st->settling_cycles = 10;
+	dat = cpu_to_be16(st->settling_cycles);
+
+	ret = ad5933_i2c_write(st->client,
+			AD5933_REG_SETTLING_CYCLES, 2, (u8 *)&dat);
+	if (ret < 0)
+		return ret;
+
+	st->freq_points = 100;
+	dat = cpu_to_be16(st->freq_points);
+
+	return ad5933_i2c_write(st->client, AD5933_REG_INC_NUM, 2, (u8 *)&dat);
+}
+
+static void ad5933_calc_out_ranges(struct ad5933_state *st)
+{
+	int i;
+	unsigned normalized_3v3[4] = {1980, 198, 383, 970};
+
+	for (i = 0; i < 4; i++)
+		st->range_avail[i] = normalized_3v3[i] * st->vref_mv / 3300;
+
+}
+
+/*
+ * handles: AD5933_REG_FREQ_START and AD5933_REG_FREQ_INC
+ */
+
+static ssize_t ad5933_show_frequency(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct ad5933_state *st = iio_priv(dev_info);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	int ret;
+	unsigned long long freqreg;
+	union {
+		u32 d32;
+		u8 d8[4];
+	} dat;
+
+	mutex_lock(&dev_info->mlock);
+	ret = ad5933_i2c_read(st->client, this_attr->address, 3, &dat.d8[1]);
+	mutex_unlock(&dev_info->mlock);
+	if (ret < 0)
+		return ret;
+
+	freqreg = be32_to_cpu(dat.d32) & 0xFFFFFF;
+
+	freqreg = (u64) freqreg * (u64) (st->mclk_hz / 4);
+	do_div(freqreg, 1 << 27);
+
+	return sprintf(buf, "%d\n", (int) freqreg);
+}
+
+static ssize_t ad5933_store_frequency(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf,
+					 size_t len)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct ad5933_state *st = iio_priv(dev_info);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	long val;
+	int ret;
+
+	ret = strict_strtoul(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	if (val > AD5933_MAX_OUTPUT_FREQ_Hz)
+		return -EINVAL;
+
+	mutex_lock(&dev_info->mlock);
+	ret = ad5933_set_freq(st, this_attr->address, val);
+	mutex_unlock(&dev_info->mlock);
+
+	return ret ? ret : len;
+}
+
+static IIO_DEVICE_ATTR(out0_freq_start, S_IRUGO | S_IWUSR,
+			ad5933_show_frequency,
+			ad5933_store_frequency,
+			AD5933_REG_FREQ_START);
+
+static IIO_DEVICE_ATTR(out0_freq_increment, S_IRUGO | S_IWUSR,
+			ad5933_show_frequency,
+			ad5933_store_frequency,
+			AD5933_REG_FREQ_INC);
+
+static ssize_t ad5933_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct ad5933_state *st = iio_priv(dev_info);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	int ret = 0, len = 0;
+
+	mutex_lock(&dev_info->mlock);
+	switch (this_attr->address) {
+	case AD5933_OUT_RANGE:
+		len = sprintf(buf, "%d\n",
+			      st->range_avail[(st->ctrl_hb >> 1) & 0x3]);
+		break;
+	case AD5933_OUT_RANGE_AVAIL:
+		len = sprintf(buf, "%d %d %d %d\n", st->range_avail[0],
+			      st->range_avail[3], st->range_avail[2],
+			      st->range_avail[1]);
+		break;
+	case AD5933_OUT_SETTLING_CYCLES:
+		len = sprintf(buf, "%d\n", st->settling_cycles);
+		break;
+	case AD5933_IN_PGA_GAIN:
+		len = sprintf(buf, "%s\n",
+			      (st->ctrl_hb & AD5933_CTRL_PGA_GAIN_1) ?
+			      "1" : "0.2");
+		break;
+	case AD5933_IN_PGA_GAIN_AVAIL:
+		len = sprintf(buf, "1 0.2\n");
+		break;
+	case AD5933_FREQ_POINTS:
+		len = sprintf(buf, "%d\n", st->freq_points);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&dev_info->mlock);
+	return ret ? ret : len;
+}
+
+static ssize_t ad5933_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf,
+					 size_t len)
+{
+	struct iio_dev *dev_info = dev_get_drvdata(dev);
+	struct ad5933_state *st = iio_priv(dev_info);
+	struct iio_dev_attr *this_attr = to_iio_dev_attr(attr);
+	long val;
+	int i, ret = 0;
+	unsigned short dat;
+
+	if (this_attr->address != AD5933_IN_PGA_GAIN) {
+		ret = strict_strtol(buf, 10, &val);
+		if (ret)
+			return ret;
+	}
+
+	mutex_lock(&dev_info->mlock);
+	switch (this_attr->address) {
+	case AD5933_OUT_RANGE:
+		for (i = 0; i < 4; i++)
+			if (val == st->range_avail[i]) {
+				st->ctrl_hb &= ~AD5933_CTRL_RANGE(0x3);
+				st->ctrl_hb |= AD5933_CTRL_RANGE(i);
+				ret = ad5933_cmd(st, 0);
+				break;
+			}
+		ret = -EINVAL;
+		break;
+	case AD5933_IN_PGA_GAIN:
+		if (sysfs_streq(buf, "1")) {
+			st->ctrl_hb |= AD5933_CTRL_PGA_GAIN_1;
+		} else if (sysfs_streq(buf, "0.2")) {
+			st->ctrl_hb &= ~AD5933_CTRL_PGA_GAIN_1;
+		} else {
+			ret = -EINVAL;
+			break;
+		}
+		ret = ad5933_cmd(st, 0);
+		break;
+	case AD5933_OUT_SETTLING_CYCLES:
+		val = clamp(val, 0L, 0x7FFL);
+		st->settling_cycles = val;
+
+		/* 2x, 4x handling, see datasheet */
+		if (val > 511)
+			val = (val >> 1) | (1 << 9);
+		else if (val > 1022)
+			val = (val >> 2) | (3 << 9);
+
+		dat = cpu_to_be16(val);
+		ret = ad5933_i2c_write(st->client,
+				AD5933_REG_SETTLING_CYCLES, 2, (u8 *)&dat);
+		break;
+	case AD5933_FREQ_POINTS:
+		val = clamp(val, 0L, 511L);
+		st->freq_points = val;
+
+		dat = cpu_to_be16(val);
+		ret = ad5933_i2c_write(st->client, AD5933_REG_INC_NUM, 2,
+				       (u8 *)&dat);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&dev_info->mlock);
+	return ret ? ret : len;
+}
+
+static IIO_DEVICE_ATTR(out0_scale, S_IRUGO | S_IWUSR,
+			ad5933_show,
+			ad5933_store,
+			AD5933_OUT_RANGE);
+
+static IIO_DEVICE_ATTR(out0_scale_available, S_IRUGO,
+			ad5933_show,
+			NULL,
+			AD5933_OUT_RANGE_AVAIL);
+
+static IIO_DEVICE_ATTR(in0_scale, S_IRUGO | S_IWUSR,
+			ad5933_show,
+			ad5933_store,
+			AD5933_IN_PGA_GAIN);
+
+static IIO_DEVICE_ATTR(in0_scale_available, S_IRUGO,
+			ad5933_show,
+			NULL,
+			AD5933_IN_PGA_GAIN_AVAIL);
+
+static IIO_DEVICE_ATTR(out0_freq_points, S_IRUGO | S_IWUSR,
+			ad5933_show,
+			ad5933_store,
+			AD5933_FREQ_POINTS);
+
+static IIO_DEVICE_ATTR(out0_settling_cycles, S_IRUGO | S_IWUSR,
+			ad5933_show,
+			ad5933_store,
+			AD5933_OUT_SETTLING_CYCLES);
+
+/* note:
+ * ideally we would handle the scale attributes via the iio_info
+ * (read|write)_raw methods, however this part is a untypical since we
+ * don't create dedicated sysfs channel attributes for out0 and in0.
+ */
+static struct attribute *ad5933_attributes[] = {
+	&iio_dev_attr_out0_scale.dev_attr.attr,
+	&iio_dev_attr_out0_scale_available.dev_attr.attr,
+	&iio_dev_attr_out0_freq_start.dev_attr.attr,
+	&iio_dev_attr_out0_freq_increment.dev_attr.attr,
+	&iio_dev_attr_out0_freq_points.dev_attr.attr,
+	&iio_dev_attr_out0_settling_cycles.dev_attr.attr,
+	&iio_dev_attr_in0_scale.dev_attr.attr,
+	&iio_dev_attr_in0_scale_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group ad5933_attribute_group = {
+	.attrs = ad5933_attributes,
+};
+
+static int ad5933_read_raw(struct iio_dev *dev_info,
+			   struct iio_chan_spec const *chan,
+			   int *val,
+			   int *val2,
+			   long m)
+{
+	struct ad5933_state *st = iio_priv(dev_info);
+	unsigned short dat;
+	int ret = -EINVAL;
+
+	mutex_lock(&dev_info->mlock);
+	switch (m) {
+	case 0:
+		if (iio_ring_enabled(dev_info)) {
+			ret = -EBUSY;
+			goto out;
+		}
+		ret = ad5933_cmd(st, AD5933_CTRL_MEASURE_TEMP);
+		if (ret < 0)
+			goto out;
+		ret = ad5933_wait_busy(st, AD5933_STAT_TEMP_VALID);
+		if (ret < 0)
+			goto out;
+
+		ret = ad5933_i2c_read(st->client,
+				AD5933_REG_TEMP_DATA, 2,
+				(u8 *)&dat);
+		if (ret < 0)
+			goto out;
+		mutex_unlock(&dev_info->mlock);
+		ret = be16_to_cpu(dat);
+		/* Temp in Milli degrees Celsius */
+		if (ret < 8192)
+			*val = ret * 1000 / 32;
+		else
+			*val = (ret - 16384) * 1000 / 32;
+
+		return IIO_VAL_INT;
+	}
+
+out:
+	mutex_unlock(&dev_info->mlock);
+	return ret;
+}
+
+static const struct iio_info ad5933_info = {
+	.read_raw = &ad5933_read_raw,
+	.attrs = &ad5933_attribute_group,
+	.driver_module = THIS_MODULE,
+};
+
+static int ad5933_ring_preenable(struct iio_dev *indio_dev)
+{
+	struct ad5933_state *st = iio_priv(indio_dev);
+	struct iio_ring_buffer *ring = indio_dev->ring;
+	size_t d_size;
+	int ret;
+
+	if (!ring->scan_count)
+		return -EINVAL;
+
+	d_size = ring->scan_count *
+		 ad5933_channels[1].scan_type.storagebits / 8;
+
+	if (indio_dev->ring->access->set_bytes_per_datum)
+		indio_dev->ring->access->set_bytes_per_datum(indio_dev->ring,
+							     d_size);
+
+	ret = ad5933_reset(st);
+	if (ret < 0)
+		return ret;
+
+	ret = ad5933_cmd(st, AD5933_CTRL_STANDBY);
+	if (ret < 0)
+		return ret;
+
+	ret = ad5933_cmd(st, AD5933_CTRL_INIT_START_FREQ);
+	if (ret < 0)
+		return ret;
+
+	st->state = AD5933_CTRL_INIT_START_FREQ;
+
+	return 0;
+}
+
+static int ad5933_ring_postenable(struct iio_dev *indio_dev)
+{
+	struct ad5933_state *st = iio_priv(indio_dev);
+
+	/* AD5933_CTRL_INIT_START_FREQ:
+	 * High Q complex circuits require a long time to reach steady state.
+	 * To facilitate the measurement of such impedances, this mode allows
+	 * the user full control of the settling time requirement before
+	 * entering start frequency sweep mode where the impedance measurement
+	 * takes place. In this mode the impedance is excited with the
+	 * programmed start frequency (ad5933_ring_preenable),
+	 * but no measurement takes place.
+	 */
+
+	schedule_delayed_work(&st->work,
+			      msecs_to_jiffies(AD5933_INIT_EXCITATION_TIME_ms));
+	return 0;
+}
+
+static int ad5933_ring_postdisable(struct iio_dev *indio_dev)
+{
+	struct ad5933_state *st = iio_priv(indio_dev);
+
+	cancel_delayed_work_sync(&st->work);
+	return ad5933_cmd(st, AD5933_CTRL_POWER_DOWN);
+}
+
+static const struct iio_ring_setup_ops ad5933_ring_setup_ops = {
+	.preenable = &ad5933_ring_preenable,
+	.postenable = &ad5933_ring_postenable,
+	.postdisable = &ad5933_ring_postdisable,
+};
+
+static int ad5933_register_ring_funcs_and_init(struct iio_dev *indio_dev)
+{
+	indio_dev->ring = iio_sw_rb_allocate(indio_dev);
+	if (!indio_dev->ring)
+		return -ENOMEM;
+
+	/* Effectively select the ring buffer implementation */
+	indio_dev->ring->access = &ring_sw_access_funcs;
+
+	/* Ring buffer functions - here trigger setup related */
+	indio_dev->ring->setup_ops = &ad5933_ring_setup_ops;
+
+	indio_dev->modes |= INDIO_RING_HARDWARE_BUFFER;
+
+	return 0;
+}
+
+static void ad5933_work(struct work_struct *work)
+{
+	struct ad5933_state *st = container_of(work,
+		struct ad5933_state, work.work);
+	struct iio_dev *indio_dev = i2c_get_clientdata(st->client);
+	struct iio_ring_buffer *ring = indio_dev->ring;
+	signed short buf[2];
+	unsigned char status;
+
+	mutex_lock(&indio_dev->mlock);
+	if (st->state == AD5933_CTRL_INIT_START_FREQ) {
+		/* start sweep */
+		ad5933_cmd(st, AD5933_CTRL_START_SWEEP);
+		st->state = AD5933_CTRL_START_SWEEP;
+		schedule_delayed_work(&st->work, st->poll_time_jiffies);
+		mutex_unlock(&indio_dev->mlock);
+		return;
+	}
+
+	ad5933_i2c_read(st->client, AD5933_REG_STATUS, 1, &status);
+
+	if (status & AD5933_STAT_DATA_VALID) {
+		ad5933_i2c_read(st->client,
+				(ring->scan_mask & (1 << 0)) ?
+				AD5933_REG_REAL_DATA : AD5933_REG_IMAG_DATA,
+				ring->scan_count * 2, (u8 *)buf);
+
+		if (ring->scan_count == 2) {
+			buf[0] = be16_to_cpu(buf[0]);
+			buf[1] = be16_to_cpu(buf[1]);
+		} else {
+			buf[0] = be16_to_cpu(buf[0]);
+		}
+		/* save datum to the ring */
+		ring->access->store_to(ring, (u8 *)buf, iio_get_time_ns());
+	} else {
+		/* no data available - try again later */
+		schedule_delayed_work(&st->work, st->poll_time_jiffies);
+		mutex_unlock(&indio_dev->mlock);
+		return;
+	}
+
+	if (status & AD5933_STAT_SWEEP_DONE) {
+		/* last sample received - power down do nothing until
+		 * the ring enable is toggled */
+		ad5933_cmd(st, AD5933_CTRL_POWER_DOWN);
+	} else {
+		/* we just received a valid datum, move on to the next */
+		ad5933_cmd(st, AD5933_CTRL_INC_FREQ);
+		schedule_delayed_work(&st->work, st->poll_time_jiffies);
+	}
+
+	mutex_unlock(&indio_dev->mlock);
+}
+
+static int __devinit ad5933_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	int ret, regdone = 0, voltage_uv = 0;
+	struct ad5933_platform_data *pdata = client->dev.platform_data;
+	struct ad5933_state *st;
+	struct iio_dev *indio_dev = iio_allocate_device(sizeof(*st));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	st->client = client;
+
+	if (!pdata)
+		st->pdata = &ad5933_default_pdata;
+	else
+		st->pdata = pdata;
+
+	st->reg = regulator_get(&client->dev, "vcc");
+	if (!IS_ERR(st->reg)) {
+		ret = regulator_enable(st->reg);
+		if (ret)
+			goto error_put_reg;
+		voltage_uv = regulator_get_voltage(st->reg);
+	}
+
+	if (voltage_uv)
+		st->vref_mv = voltage_uv / 1000;
+	else
+		st->vref_mv = st->pdata->vref_mv;
+
+	if (st->pdata->ext_clk_Hz) {
+		st->mclk_hz = st->pdata->ext_clk_Hz;
+		st->ctrl_lb = AD5933_CTRL_EXT_SYSCLK;
+	} else {
+		st->mclk_hz = AD5933_INT_OSC_FREQ_Hz;
+		st->ctrl_lb = AD5933_CTRL_INT_SYSCLK;
+	}
+
+	ad5933_calc_out_ranges(st);
+	INIT_DELAYED_WORK(&st->work, ad5933_work);
+	st->poll_time_jiffies = msecs_to_jiffies(AD5933_POLL_TIME_ms);
+
+	indio_dev->dev.parent = &client->dev;
+	indio_dev->info = &ad5933_info;
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ad5933_channels;
+	indio_dev->num_channels = 1; /* only register temp0_input */
+
+	ret = ad5933_register_ring_funcs_and_init(indio_dev);
+	if (ret)
+		goto error_disable_reg;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_unreg_ring;
+	regdone = 1;
+
+	/* skip temp0_input, register in0_(real|imag)_raw */
+	ret = iio_ring_buffer_register_ex(indio_dev->ring, 0,
+					  &ad5933_channels[1],
+					  2);
+	if (ret)
+		goto error_unreg_ring;
+
+	/* enable both REAL and IMAG channels by default */
+	iio_scan_mask_set(indio_dev->ring, 0);
+	iio_scan_mask_set(indio_dev->ring, 1);
+
+	ret = ad5933_setup(st);
+	if (ret)
+		goto error_uninitialize_ring;
+
+	return 0;
+
+error_uninitialize_ring:
+	iio_ring_buffer_unregister(indio_dev->ring);
+error_unreg_ring:
+	iio_sw_rb_free(indio_dev->ring);
+error_disable_reg:
+	if (!IS_ERR(st->reg))
+		regulator_disable(st->reg);
+error_put_reg:
+	if (!IS_ERR(st->reg))
+		regulator_put(st->reg);
+
+	if (regdone)
+		iio_device_unregister(indio_dev);
+	else
+		iio_free_device(indio_dev);
+
+	return ret;
+}
+
+static __devexit int ad5933_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct ad5933_state *st = iio_priv(indio_dev);
+
+	iio_ring_buffer_unregister(indio_dev->ring);
+	iio_sw_rb_free(indio_dev->ring);
+	if (!IS_ERR(st->reg)) {
+		regulator_disable(st->reg);
+		regulator_put(st->reg);
+	}
+	iio_device_unregister(indio_dev);
+
+	return 0;
+}
+
+static const struct i2c_device_id ad5933_id[] = {
+	{ "ad5933", 0 },
+	{ "ad5934", 0 },
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, ad5933_id);
+
+static struct i2c_driver ad5933_driver = {
+	.driver = {
+		.name = "ad5933",
+	},
+	.probe = ad5933_probe,
+	.remove = __devexit_p(ad5933_remove),
+	.id_table = ad5933_id,
+};
+
+static __init int ad5933_init(void)
+{
+	return i2c_add_driver(&ad5933_driver);
+}
+module_init(ad5933_init);
+
+static __exit void ad5933_exit(void)
+{
+	i2c_del_driver(&ad5933_driver);
+}
+module_exit(ad5933_exit);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("Analog Devices AD5933 Impedance Conv. Network Analyzer");
+MODULE_LICENSE("GPL v2");

drivers/staging/iio/impedance-analyzer/ad5933.h

+/*
+ * AD5933 AD5934 Impedance Converter, Network Analyzer
+ *
+ * Copyright 2011 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef IIO_ADC_AD5933_H_
+#define IIO_ADC_AD5933_H_
+
+/*
+ * TODO: struct ad5933_platform_data needs to go into include/linux/iio
+ */
+
+/**
+ * struct ad5933_platform_data - platform specific data
+ * @ext_clk_Hz:		the external clock frequency in Hz, if not set
+ *			the driver uses the internal clock (16.776 MHz)
+ * @vref_mv:		the external reference voltage in millivolt
+ */
+
+struct ad5933_platform_data {
+	unsigned long			ext_clk_Hz;
+	unsigned short			vref_mv;
+};
+
+#endif /* IIO_ADC_AD5933_H_ */