Merge master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/lethal/sh-2.6: (35 commits)
  sh: rts7751r2d board updates.
  sh: Kill off dead bigsur and ec3104 boards.
  sh: Fixup r7780rp pata_platform for devres conversion.
  sh: Revert TLB miss fast-path changes that broke PTEA parts.
  sh: Compile fix for heartbeat consolidation.
  sh: heartbeat consolidation for banked LEDs.
  sh: define dma noncoherent API functions.
  sh: Missing flush_dcache_all() proto in cacheflush.h.
  sh: Kill dead/unused ISA code from __ioremap().
  sh: Add cpu-features header to asm/Kbuild.
  sh: Move __KERNEL__ up in asm/page.h.
  sh: Fix syscall numbering breakage.
  sh: dcache write-back for R7780RP PIO.
  sh: Switch to local TLB flush variants in additional callsites.
  sh: Local TLB flushing variants for SMP prep.
  sh: Fixup cpu_data references for the non-boot CPUs.
  sh: Use a per-cpu ASID cache.
  sh: add SH_CLK_MD Kconfig default.
  sh: Fixup SHMIN INTC register definitions.
  sh: SH-DMAC compile fixes
  ...

arch/sh/Kconfig

@@ -135,12 +135,6 @@ config SH_HP6XX
 	  More information (hardware only) at
 	  <http://www.hp.com/jornada/>.
 
-config SH_EC3104
-	bool "EC3104"
-	help
-	  Select EC3104 if configuring for a system with an Eclipse
-	  International EC3104 chip, e.g. the Harris AD2000.
-
 config SH_SATURN
 	bool "Saturn"
 	select CPU_SUBTYPE_SH7604
@@ -156,9 +150,6 @@ config SH_DREAMCAST
 	  <http://www.m17n.org/linux-sh/dreamcast/>.  There is a
 	  Dreamcast project is at <http://linuxdc.sourceforge.net/>.
 
-config SH_BIGSUR
-	bool "BigSur"
-
 config SH_MPC1211
 	bool "Interface MPC1211"
 	help
@@ -481,6 +472,7 @@ config SH_PCLK_FREQ
 
 config SH_CLK_MD
 	int "CPU Mode Pin Setting"
+	default 0
 	depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206
 	help
 	  MD2 - MD0 pin setting.
@@ -510,8 +502,9 @@ source "arch/sh/cchips/Kconfig"
 config HEARTBEAT
 	bool "Heartbeat LED"
 	depends on SH_MPC1211 || SH_SH03 || \
-		   SH_BIGSUR || SOLUTION_ENGINE || \
-		   SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK
+		   SOLUTION_ENGINE || \
+		   SH_RTS7751R2D || SH_SH4202_MICRODEV || SH_LANDISK || \
+		   SH_R7780RP
 	help
 	  Use the power-on LED on your machine as a load meter.  The exact
 	  behavior is platform-dependent, but normally the flash frequency is
@@ -596,6 +589,8 @@ menu "Boot options"
 config ZERO_PAGE_OFFSET
 	hex "Zero page offset"
 	default "0x00004000" if SH_MPC1211 || SH_SH03
+	default "0x00010000" if PAGE_SIZE_64KB
+	default "0x00002000" if PAGE_SIZE_8KB
 	default "0x00001000"
 	help
 	  This sets the default offset of zero page.

arch/sh/Makefile

@@ -35,6 +35,7 @@ endif
 endif
 
 cflags-$(CONFIG_CPU_SH2)		:= -m2
+cflags-$(CONFIG_CPU_SH2A)		:= -m2a $(call cc-option,-m2a-nofpu,)
 cflags-$(CONFIG_CPU_SH3)		:= -m3
 cflags-$(CONFIG_CPU_SH4)		:= -m4 \
 	$(call cc-option,-mno-implicit-fp,-m4-nofpu)
@@ -93,10 +94,8 @@ machdir-$(CONFIG_SH_7300_SOLUTION_ENGINE)	:= se/7300
 machdir-$(CONFIG_SH_7343_SOLUTION_ENGINE)	:= se/7343
 machdir-$(CONFIG_SH_73180_SOLUTION_ENGINE)	:= se/73180
 machdir-$(CONFIG_SH_HP6XX)			:= hp6xx
-machdir-$(CONFIG_SH_EC3104)			:= ec3104
 machdir-$(CONFIG_SH_SATURN)			:= saturn
 machdir-$(CONFIG_SH_DREAMCAST)			:= dreamcast
-machdir-$(CONFIG_SH_BIGSUR)			:= bigsur
 machdir-$(CONFIG_SH_MPC1211)			:= mpc1211
 machdir-$(CONFIG_SH_SH03)			:= sh03
 machdir-$(CONFIG_SH_SECUREEDGE5410)		:= snapgear

arch/sh/boards/bigsur/Makefile

-#
-# Makefile for the BigSur specific parts of the kernel
-#
-
-obj-y	 := setup.o io.o irq.o led.o
-

arch/sh/boards/bigsur/io.c

-/*
- * arch/sh/boards/bigsur/io.c
- *
- * By Dustin McIntire (dustin@sensoria.com) (c)2001
- * Derived from io_hd64465.h, which bore the message:
- * By Greg Banks <gbanks@pocketpenguins.com>
- * (c) 2000 PocketPenguins Inc. 
- * and from io_hd64461.h, which bore the message:
- * Copyright 2000 Stuart Menefy (stuart.menefy@st.com)
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * IO functions for a Hitachi Big Sur Evaluation Board.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-#include <asm/bigsur/bigsur.h>
-
-/* Low iomap maps port 0-1K to addresses in 8byte chunks */
-#define BIGSUR_IOMAP_LO_THRESH 0x400
-#define BIGSUR_IOMAP_LO_SHIFT	3
-#define BIGSUR_IOMAP_LO_MASK	((1<<BIGSUR_IOMAP_LO_SHIFT)-1)
-#define BIGSUR_IOMAP_LO_NMAP	(BIGSUR_IOMAP_LO_THRESH>>BIGSUR_IOMAP_LO_SHIFT)
-static u32 bigsur_iomap_lo[BIGSUR_IOMAP_LO_NMAP];
-static u8 bigsur_iomap_lo_shift[BIGSUR_IOMAP_LO_NMAP];
-
-/* High iomap maps port 1K-64K to addresses in 1K chunks */
-#define BIGSUR_IOMAP_HI_THRESH 0x10000
-#define BIGSUR_IOMAP_HI_SHIFT	10
-#define BIGSUR_IOMAP_HI_MASK	((1<<BIGSUR_IOMAP_HI_SHIFT)-1)
-#define BIGSUR_IOMAP_HI_NMAP	(BIGSUR_IOMAP_HI_THRESH>>BIGSUR_IOMAP_HI_SHIFT)
-static u32 bigsur_iomap_hi[BIGSUR_IOMAP_HI_NMAP];
-static u8 bigsur_iomap_hi_shift[BIGSUR_IOMAP_HI_NMAP];
-
-void bigsur_port_map(u32 baseport, u32 nports, u32 addr, u8 shift)
-{
-	u32 port, endport = baseport + nports;
-
-	pr_debug("bigsur_port_map(base=0x%0x, n=0x%0x, addr=0x%08x)\n",
-		 baseport, nports, addr);
-	    
-	for (port = baseport ;
-	     port < endport && port < BIGSUR_IOMAP_LO_THRESH ;
-	     port += (1<<BIGSUR_IOMAP_LO_SHIFT)) {
-	    	pr_debug("    maplo[0x%x] = 0x%08x\n", port, addr);
-    	    bigsur_iomap_lo[port>>BIGSUR_IOMAP_LO_SHIFT] = addr;
-    	    bigsur_iomap_lo_shift[port>>BIGSUR_IOMAP_LO_SHIFT] = shift;
-	    	addr += (1<<(BIGSUR_IOMAP_LO_SHIFT));
-	}
-
-	for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH);
-	     port < endport && port < BIGSUR_IOMAP_HI_THRESH ;
-	     port += (1<<BIGSUR_IOMAP_HI_SHIFT)) {
-	    	pr_debug("    maphi[0x%x] = 0x%08x\n", port, addr);
-    	    bigsur_iomap_hi[port>>BIGSUR_IOMAP_HI_SHIFT] = addr;
-    	    bigsur_iomap_hi_shift[port>>BIGSUR_IOMAP_HI_SHIFT] = shift;
-	    	addr += (1<<(BIGSUR_IOMAP_HI_SHIFT));
-	}
-}
-EXPORT_SYMBOL(bigsur_port_map);
-
-void bigsur_port_unmap(u32 baseport, u32 nports)
-{
-	u32 port, endport = baseport + nports;
-	
-	pr_debug("bigsur_port_unmap(base=0x%0x, n=0x%0x)\n", baseport, nports);
-
-	for (port = baseport ;
-	     port < endport && port < BIGSUR_IOMAP_LO_THRESH ;
-	     port += (1<<BIGSUR_IOMAP_LO_SHIFT)) {
-		bigsur_iomap_lo[port>>BIGSUR_IOMAP_LO_SHIFT] = 0;
-	}
-
-	for (port = max_t(u32, baseport, BIGSUR_IOMAP_LO_THRESH);
-	     port < endport && port < BIGSUR_IOMAP_HI_THRESH ;
-	     port += (1<<BIGSUR_IOMAP_HI_SHIFT)) {
-		bigsur_iomap_hi[port>>BIGSUR_IOMAP_HI_SHIFT] = 0;
-	}
-}
-EXPORT_SYMBOL(bigsur_port_unmap);
-
-unsigned long bigsur_isa_port2addr(unsigned long port)
-{
-	unsigned long addr = 0;
-	unsigned char shift;
-
-	/* Physical address not in P0, do nothing */
-	if (PXSEG(port)) {
-		addr = port;
-	/* physical address in P0, map to P2 */
-	} else if (port >= 0x30000) {
-		addr = P2SEGADDR(port);
-	/* Big Sur I/O + HD64465 registers 0x10000-0x30000 */
-	} else if (port >= BIGSUR_IOMAP_HI_THRESH) {
-		addr = BIGSUR_INTERNAL_BASE + (port - BIGSUR_IOMAP_HI_THRESH);
-	/* Handle remapping of high IO/PCI IO ports */
-	} else if (port >= BIGSUR_IOMAP_LO_THRESH) {
-		addr = bigsur_iomap_hi[port >> BIGSUR_IOMAP_HI_SHIFT];
-		shift = bigsur_iomap_hi_shift[port >> BIGSUR_IOMAP_HI_SHIFT];
-
-		if (addr != 0)
-			addr += (port & BIGSUR_IOMAP_HI_MASK) << shift;
-	} else {
-		/* Handle remapping of low IO ports */
-		addr = bigsur_iomap_lo[port >> BIGSUR_IOMAP_LO_SHIFT];
-		shift = bigsur_iomap_lo_shift[port >> BIGSUR_IOMAP_LO_SHIFT];
-
-		if (addr != 0)
-			addr += (port & BIGSUR_IOMAP_LO_MASK) << shift;
-	}
-
-	pr_debug("%s(0x%08lx) = 0x%08lx\n", __FUNCTION__, port, addr);
-
-	return addr;
-}
-

arch/sh/boards/bigsur/led.c

-/*
- * linux/arch/sh/boards/bigsur/led.c
- *
- * By Dustin McIntire (dustin@sensoria.com) (c)2001
- * Derived from led_se.c and led.c, which bore the message:
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * This file contains Big Sur specific LED code.
- */
-
-#include <asm/io.h>
-#include <asm/bigsur/bigsur.h>
-
-static void mach_led(int position, int value)
-{
-	int word;
-	
-	word = bigsur_inl(BIGSUR_CSLR);
-	if (value) {
-		bigsur_outl(word & ~BIGSUR_LED, BIGSUR_CSLR);
-	} else {
-		bigsur_outl(word | BIGSUR_LED, BIGSUR_CSLR);
-	}
-}
-
-#ifdef CONFIG_HEARTBEAT
-
-#include <linux/sched.h>
-
-/* Cycle the LED on/off */
-void heartbeat_bigsur(void)
-{
-	static unsigned cnt = 0, period = 0, dist = 0;
-
-	if (cnt == 0 || cnt == dist)
-		mach_led( -1, 1);
-	else if (cnt == 7 || cnt == dist+7)
-		mach_led( -1, 0);
-
-	if (++cnt > period) {
-		cnt = 0;
-		/* The hyperbolic function below modifies the heartbeat period
-		 * length in dependency of the current (5min) load. It goes
-		 * through the points f(0)=126, f(1)=86, f(5)=51,
-		 * f(inf)->30. */
-		period = ((672<<FSHIFT)/(5*avenrun[0]+(7<<FSHIFT))) + 30;
-		dist = period / 4;
-	}
-}
-#endif /* CONFIG_HEARTBEAT */
-

arch/sh/boards/bigsur/setup.c

-/*
- *
- * By Dustin McIntire (dustin@sensoria.com) (c)2001
- * 
- * Setup and IRQ handling code for the HD64465 companion chip.
- * by Greg Banks <gbanks@pocketpenguins.com>
- * Copyright (c) 2000 PocketPenguins Inc
- *
- * Derived from setup_hd64465.c which bore the message:
- * Greg Banks <gbanks@pocketpenguins.com>
- * Copyright (c) 2000 PocketPenguins Inc and
- * Copyright (C) 2000 YAEGASHI Takeshi
- * and setup_cqreek.c which bore message:
- * Copyright (C) 2000  Niibe Yutaka
- * 
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * Setup functions for a Hitachi Big Sur Evaluation Board.
- * 
- */
-
-#include <linux/sched.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/machvec.h>
-#include <asm/bigsur/io.h>
-#include <asm/hd64465/hd64465.h>
-#include <asm/bigsur/bigsur.h>
-
-/*===========================================================*/
-//		Big Sur Init Routines	
-/*===========================================================*/
-
-static void __init bigsur_setup(char **cmdline_p)
-{
-	/* Mask all 2nd level IRQ's */
-	outb(-1,BIGSUR_IMR0);
-	outb(-1,BIGSUR_IMR1);
-	outb(-1,BIGSUR_IMR2);
-	outb(-1,BIGSUR_IMR3);
-
-	/* Mask 1st level interrupts */
-	outb(-1,BIGSUR_IRLMR0);
-	outb(-1,BIGSUR_IRLMR1);
-
-#if defined (CONFIG_HD64465) && defined (CONFIG_SERIAL) 
-	/* remap IO ports for first ISA serial port to HD64465 UART */
-	bigsur_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1);
-#endif /* CONFIG_HD64465 && CONFIG_SERIAL */
-	/* TODO: setup IDE registers */
-	bigsur_port_map(BIGSUR_IDECTL_IOPORT, 2, BIGSUR_ICTL, 8);
-	/* Setup the Ethernet port to BIGSUR_ETHER_IOPORT */
-	bigsur_port_map(BIGSUR_ETHER_IOPORT, 16, BIGSUR_ETHR+BIGSUR_ETHER_IOPORT, 0);
-	/* set page to 1 */
-	outw(1, BIGSUR_ETHR+0xe);
-	/* set the IO port to BIGSUR_ETHER_IOPORT */
-	outw(BIGSUR_ETHER_IOPORT<<3, BIGSUR_ETHR+0x2);
-}
-
-/*
- * The Machine Vector
- */
-extern void heartbeat_bigsur(void);
-extern void init_bigsur_IRQ(void);
-
-struct sh_machine_vector mv_bigsur __initmv = {
-	.mv_name		= "Big Sur",
-	.mv_setup		= bigsur_setup,
-
-	.mv_isa_port2addr	= bigsur_isa_port2addr,
-	.mv_irq_demux       	= bigsur_irq_demux,
-
-	.mv_init_irq		= init_bigsur_IRQ,
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_bigsur,
-#endif
-};
-ALIAS_MV(bigsur)

arch/sh/boards/ec3104/Makefile

-#
-# Makefile for the EC3104 specific parts of the kernel
-#
-
-obj-y	 := setup.o io.o irq.o
-

arch/sh/boards/ec3104/io.c

-/*
- * linux/arch/sh/boards/ec3104/io.c
- *  EC3104 companion chip support
- *
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- *
- */
-/* EC3104 note:
- * This code was written without any documentation about the EC3104 chip.  While
- * I hope I got most of the basic functionality right, the register names I use
- * are most likely completely different from those in the chip documentation.
- *
- * If you have any further information about the EC3104, please tell me
- * (prumpf@tux.org).
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/page.h>
-#include <asm/ec3104/ec3104.h>
-
-/*
- * EC3104 has a real ISA bus which we redirect low port accesses to (the
- * actual device on mine is a ESS 1868, and I don't want to hack the driver
- * more than strictly necessary).  I am not going to duplicate the
- * hard coding of PC addresses (for the 16550s aso) here though;  it's just
- * too ugly.
- */
-
-#define low_port(port) ((port) < 0x10000)
-
-static inline unsigned long port2addr(unsigned long port)
-{
-	switch(port >> 16) {
-	case 0:
-		return EC3104_ISA_BASE + port * 2;
-
-		/* XXX hack. it's unclear what to do about the serial ports */
-	case 1:
-		return EC3104_BASE + (port&0xffff) * 4;
-
-	default:
-		/* XXX PCMCIA */
-		return 0;
-	}
-}
-
-unsigned char ec3104_inb(unsigned long port)
-{
-	u8 ret;
-
-	ret = *(volatile u8 *)port2addr(port);
-
-	return ret;
-}
-
-unsigned short ec3104_inw(unsigned long port)
-{
-	BUG();
-}
-
-unsigned long ec3104_inl(unsigned long port)
-{
-	BUG();
-}
-
-void ec3104_outb(unsigned char data, unsigned long port)
-{
-	*(volatile u8 *)port2addr(port) = data;
-}
-
-void ec3104_outw(unsigned short data, unsigned long port)
-{
-	BUG();
-}
-
-void ec3104_outl(unsigned long data, unsigned long port)
-{
-	BUG();
-}

arch/sh/boards/ec3104/irq.c

-/*
- * linux/arch/sh/boards/ec3104/irq.c
- * EC3104 companion chip support
- *
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- *
- */
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/ec3104/ec3104.h>
-
-/* This is for debugging mostly;  here's the table that I intend to keep
- * in here:
- *
- *   index      function        base addr       power           interrupt bit
- *       0      power           b0ec0000        ---             00000001 (unused)
- *       1      irqs            b0ec1000        ---             00000002 (unused)
- *       2      ??              b0ec2000        b0ec0008        00000004
- *       3      PS2 (1)         b0ec3000        b0ec000c        00000008
- *       4      PS2 (2)         b0ec4000        b0ec0010        00000010
- *       5      ??              b0ec5000        b0ec0014        00000020
- *       6      I2C             b0ec6000        b0ec0018        00000040
- *       7      serial (1)      b0ec7000        b0ec001c        00000080
- *       8      serial (2)      b0ec8000        b0ec0020        00000100
- *       9      serial (3)      b0ec9000        b0ec0024        00000200
- *      10      serial (4)      b0eca000        b0ec0028        00000400
- *      12      GPIO (1)        b0ecc000        b0ec0030
- *      13      GPIO (2)        b0ecc000        b0ec0030
- *      16      pcmcia (1)      b0ed0000        b0ec0040        00010000
- *      17      pcmcia (2)      b0ed1000        b0ec0044        00020000
- */
-
-/* I used the register names from another interrupt controller I worked with,
- * since it seems to be identical to the ec3104 except that all bits are
- * inverted:
- *
- * IRR: Interrupt Request Register (pending and enabled interrupts)
- * IMR: Interrupt Mask Register (which interrupts are enabled)
- * IPR: Interrupt Pending Register (pending interrupts, even disabled ones)
- *
- * 0 bits mean pending or enabled, 1 bits mean not pending or disabled.  all
- * IRQs seem to be level-triggered.
- */
-
-#define EC3104_IRR (EC3104_BASE + 0x1000)
-#define EC3104_IMR (EC3104_BASE + 0x1004)
-#define EC3104_IPR (EC3104_BASE + 0x1008)
-
-#define ctrl_readl(addr) (*(volatile u32 *)(addr))
-#define ctrl_writel(data,addr) (*(volatile u32 *)(addr) = (data))
-#define ctrl_readb(addr) (*(volatile u8 *)(addr))
-
-static char *ec3104_name(unsigned index)
-{
-        switch(index) {
-        case 0:
-                return "power management";
-        case 1:
-                return "interrupts";
-        case 3:
-                return "PS2 (1)";
-        case 4:
-                return "PS2 (2)";
-        case 5:
-                return "I2C (1)";
-        case 6:
-                return "I2C (2)";
-        case 7:
-                return "serial (1)";
-        case 8:
-                return "serial (2)";
-        case 9:
-                return "serial (3)";
-        case 10:
-                return "serial (4)";
-        case 16:
-                return "pcmcia (1)";
-        case 17:
-                return "pcmcia (2)";
-        default: {
-                static char buf[32];
-
-                sprintf(buf, "unknown (%d)", index);
-
-                return buf;
-                }
-        }
-}
-
-int get_pending_interrupts(char *buf)
-{
-        u32 ipr;
-        u32 bit;
-        char *p = buf;
-
-        p += sprintf(p, "pending: (");
-
-        ipr = ctrl_inl(EC3104_IPR);
-
-        for (bit = 1; bit < 32; bit++)
-                if (!(ipr & (1<<bit)))
-                        p += sprintf(p, "%s ", ec3104_name(bit));
-
-        p += sprintf(p, ")\n");
-
-        return p - buf;
-}
-
-static inline u32 ec3104_irq2mask(unsigned int irq)
-{
-        return (1 << (irq - EC3104_IRQBASE));
-}
-
-static inline void mask_ec3104_irq(unsigned int irq)
-{
-        u32 mask;
-
-        mask = ctrl_readl(EC3104_IMR);
-
-        mask |= ec3104_irq2mask(irq);
-
-        ctrl_writel(mask, EC3104_IMR);
-}
-
-static inline void unmask_ec3104_irq(unsigned int irq)
-{
-        u32 mask;
-
-        mask = ctrl_readl(EC3104_IMR);
-
-        mask &= ~ec3104_irq2mask(irq);
-
-        ctrl_writel(mask, EC3104_IMR);
-}
-
-static void disable_ec3104_irq(unsigned int irq)
-{
-        mask_ec3104_irq(irq);
-}
-
-static void enable_ec3104_irq(unsigned int irq)
-{
-        unmask_ec3104_irq(irq);
-}
-
-static void mask_and_ack_ec3104_irq(unsigned int irq)
-{
-        mask_ec3104_irq(irq);
-}
-
-static void end_ec3104_irq(unsigned int irq)
-{
-        if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-                unmask_ec3104_irq(irq);
-}
-
-static unsigned int startup_ec3104_irq(unsigned int irq)
-{
-        unmask_ec3104_irq(irq);
-
-        return 0;
-}
-
-static void shutdown_ec3104_irq(unsigned int irq)
-{
-        mask_ec3104_irq(irq);
-
-}
-
-static struct hw_interrupt_type ec3104_int = {
-        .typename       = "EC3104",
-        .enable         = enable_ec3104_irq,
-        .disable        = disable_ec3104_irq,
-        .ack            = mask_and_ack_ec3104_irq,
-        .end            = end_ec3104_irq,
-        .startup        = startup_ec3104_irq,
-        .shutdown       = shutdown_ec3104_irq,
-};
-
-/* Yuck.  the _demux API is ugly */
-int ec3104_irq_demux(int irq)
-{
-        if (irq == EC3104_IRQ) {
-                unsigned int mask;
-
-                mask = ctrl_readl(EC3104_IRR);
-
-                if (mask == 0xffffffff)
-                        return EC3104_IRQ;
-                else
-                        return EC3104_IRQBASE + ffz(mask);
-        }
-
-        return irq;
-}

arch/sh/boards/ec3104/setup.c

-/*
- * linux/arch/sh/boards/ec3104/setup.c
- *  EC3104 companion chip support
- *
- * Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
- *
- */
-/* EC3104 note:
- * This code was written without any documentation about the EC3104 chip.  While
- * I hope I got most of the basic functionality right, the register names I use
- * are most likely completely different from those in the chip documentation.
- *
- * If you have any further information about the EC3104, please tell me
- * (prumpf@tux.org).
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/param.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/machvec.h>
-#include <asm/mach/ec3104.h>
-
-static void __init ec3104_setup(char **cmdline_p)
-{
-	char str[8];
-	int i;
-
-	for (i=0; i<8; i++)
-		str[i] = ctrl_readb(EC3104_BASE + i);
-
-	for (i = EC3104_IRQBASE; i < EC3104_IRQBASE + 32; i++)
-		irq_desc[i].handler = &ec3104_int;
-
-	printk("initializing EC3104 \"%.8s\" at %08x, IRQ %d, IRQ base %d\n",
-	       str, EC3104_BASE, EC3104_IRQ, EC3104_IRQBASE);
-
-	/* mask all interrupts.  this should have been done by the boot
-	 * loader for us but we want to be sure ... */
-	ctrl_writel(0xffffffff, EC3104_IMR);
-}
-
-/*
- * The Machine Vector
- */
-struct sh_machine_vector mv_ec3104 __initmv = {
-	.mv_name	= "EC3104",
-	.mv_setup	= ec3104_setup,
-	.mv_nr_irqs	= 96,
-
-	.mv_inb		= ec3104_inb,
-	.mv_inw		= ec3104_inw,
-	.mv_inl		= ec3104_inl,
-	.mv_outb	= ec3104_outb,
-	.mv_outw	= ec3104_outw,
-	.mv_outl	= ec3104_outl,
-
-	.mv_irq_demux	= ec3104_irq_demux,
-};
-ALIAS_MV(ec3104)

arch/sh/boards/mpc1211/Makefile

@@ -2,7 +2,7 @@
 # Makefile for the Interface (CTP/PCI/MPC-SH02) specific parts of the kernel
 #
 
-obj-y	 := setup.o rtc.o led.o
+obj-y	 := setup.o rtc.o
 
 obj-$(CONFIG_PCI) += pci.o
 

arch/sh/boards/mpc1211/led.c

-/*
- * linux/arch/sh/boards/mpc1211/led.c
- *
- * Copyright (C) 2001  Saito.K & Jeanne
- *
- * This file contains Interface MPC-1211 specific LED code.
- */
-
-
-static void mach_led(int position, int value)
-{
-	volatile unsigned char* p = (volatile unsigned char*)0xa2000000;
-
-	if (value) {
-		*p |= 1;
-	} else {
-		*p &= ~1;
-	}
-}
-
-#ifdef CONFIG_HEARTBEAT
-
-#include <linux/sched.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_mpc1211(void)
-{
-	static unsigned int cnt = 0, period = 0;
-	volatile unsigned char* p = (volatile unsigned char*)0xa2000000;
-	static unsigned bit = 0, up = 1;
-
-	cnt += 1;
-	if (cnt < period) {
-		return;
-	}
-
-	cnt = 0;
-
-	/* Go through the points (roughly!):
-	 * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
-	 */
-	period = 110 - ( (300<<FSHIFT)/
-			 ((avenrun[0]/5) + (3<<FSHIFT)) );
-
-	if (up) {
-		if (bit == 7) {
-			bit--;
-			up=0;
-		} else {
-			bit ++;
-		}
-	} else {
-		if (bit == 0) {
-			bit++;
-			up=1;
-		} else {
-			bit--;
-		}
-	}
-	*p = 1<<bit;
-
-}
-#endif /* CONFIG_HEARTBEAT */

arch/sh/boards/mpc1211/setup.c

@@ -10,6 +10,7 @@
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <linux/interrupt.h>
+#include <linux/platform_device.h>
 #include <asm/io.h>
 #include <asm/machvec.h>
 #include <asm/mpc1211/mpc1211.h>
@@ -281,6 +282,32 @@ static int put_smb_blk(unsigned char *p, int address, int command, int no)
 	return 0;
 }
 
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= 0xa2000000,
+		.end	= 0xa2000000 + 8 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *mpc1211_devices[] __initdata = {
+	&heartbeat_device,
+};
+
+static int __init mpc1211_devices_setup(void)
+{
+	return platform_add_devices(mpc1211_devices,
+				    ARRAY_SIZE(mpc1211_devices));
+}
+__initcall(mpc1211_devices_setup);
+
 /* arch/sh/boards/mpc1211/rtc.c */
 void mpc1211_time_init(void);
 
@@ -317,9 +344,5 @@ struct sh_machine_vector mv_mpc1211 __initmv = {
 	.mv_nr_irqs		= 48,
 	.mv_irq_demux		= mpc1211_irq_demux,
 	.mv_init_irq		= init_mpc1211_IRQ,
-
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_mpc1211,
-#endif
 };
 ALIAS_MV(mpc1211)

arch/sh/boards/renesas/r7780rp/Makefile

@@ -4,5 +4,4 @@
 
 obj-y	 := setup.o io.o irq.o
 
-obj-$(CONFIG_HEARTBEAT)		+= led.o
 obj-$(CONFIG_PUSH_SWITCH)	+= psw.o

arch/sh/boards/renesas/r7780rp/io.c

@@ -11,22 +11,9 @@
 #include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/types.h>
+#include <linux/io.h>
 #include <asm/r7780rp.h>
 #include <asm/addrspace.h>
-#include <asm/io.h>
-
-static inline unsigned long port2adr(unsigned int port)
-{
-	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
-		if (port == 0x3f6)
-			return (PA_AREA5_IO + 0x80c);
-		else
-			return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1));
-	else
-		maybebadio((unsigned long)port);
-
-	return port;
-}
 
 static inline unsigned long port88796l(unsigned int port, int flag)
 {
@@ -40,18 +27,6 @@ static inline unsigned long port88796l(unsigned int port, int flag)
 	return addr;
 }
 
-/* The 7780 R7780RP-1 seems to have everything hooked */
-/* up pretty normally (nothing on high-bytes only...) so this */
-/* shouldn't be needed */
-static inline int shifted_port(unsigned long port)
-{
-	/* For IDE registers, value is not shifted */
-	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
-		return 0;
-	else
-		return 1;
-}
-
 #if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE)
 #define CHECK_AX88796L_PORT(port) \
   ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20)))
@@ -70,12 +45,10 @@ u8 r7780rp_inb(unsigned long port)
 {
 	if (CHECK_AX88796L_PORT(port))
 		return ctrl_inw(port88796l(port, 0)) & 0xff;
-	else if (PXSEG(port))
-		return ctrl_inb(port);
-	else if (is_pci_ioaddr(port) || shifted_port(port))
+	else if (is_pci_ioaddr(port))
 		return ctrl_inb(pci_ioaddr(port));
 
-	return ctrl_inw(port2adr(port)) & 0xff;
+	return ctrl_inw(port) & 0xff;
 }
 
 u8 r7780rp_inb_p(unsigned long port)
@@ -84,12 +57,10 @@ u8 r7780rp_inb_p(unsigned long port)
 
 	if (CHECK_AX88796L_PORT(port))
 		v = ctrl_inw(port88796l(port, 0)) & 0xff;
-	else if (PXSEG(port))
-		v = ctrl_inb(port);
-	else if (is_pci_ioaddr(port) || shifted_port(port))
+	else if (is_pci_ioaddr(port))
 		v = ctrl_inb(pci_ioaddr(port));
 	else
-		v = ctrl_inw(port2adr(port)) & 0xff;
+		v = ctrl_inw(port) & 0xff;
 
 	ctrl_delay();
 
@@ -98,80 +69,56 @@ u8 r7780rp_inb_p(unsigned long port)
 
 u16 r7780rp_inw(unsigned long port)
 {
-	if (CHECK_AX88796L_PORT(port))
-		maybebadio(port);
-	else if (PXSEG(port))
-		return ctrl_inw(port);
-	else if (is_pci_ioaddr(port) || shifted_port(port))
+	if (is_pci_ioaddr(port))
 		return ctrl_inw(pci_ioaddr(port));
-	else
-		maybebadio(port);
 
-	return 0;
+	return ctrl_inw(port);
 }
 
 u32 r7780rp_inl(unsigned long port)
 {
-	if (CHECK_AX88796L_PORT(port))
-		maybebadio(port);
-	else if (PXSEG(port))
-		return ctrl_inl(port);
-	else if (is_pci_ioaddr(port) || shifted_port(port))
+	if (is_pci_ioaddr(port))
 		return ctrl_inl(pci_ioaddr(port));
-	else
-		maybebadio(port);
 
-	return 0;
+	return ctrl_inl(port);
 }
 
 void r7780rp_outb(u8 value, unsigned long port)
 {
 	if (CHECK_AX88796L_PORT(port))
 		ctrl_outw(value, port88796l(port, 0));
-	else if (PXSEG(port))
-		ctrl_outb(value, port);
-	else if (is_pci_ioaddr(port) || shifted_port(port))
+	else if (is_pci_ioaddr(port))
 		ctrl_outb(value, pci_ioaddr(port));
 	else
-		ctrl_outw(value, port2adr(port));
+		ctrl_outb(value, port);
 }
 
 void r7780rp_outb_p(u8 value, unsigned long port)
 {
 	if (CHECK_AX88796L_PORT(port))
 		ctrl_outw(value, port88796l(port, 0));
-	else if (PXSEG(port))
-		ctrl_outb(value, port);
-	else if (is_pci_ioaddr(port) || shifted_port(port))
+	else if (is_pci_ioaddr(port))
 		ctrl_outb(value, pci_ioaddr(port));
 	else
-		ctrl_outw(value, port2adr(port));
+		ctrl_outb(value, port);
 
 	ctrl_delay();
 }
 
 void r7780rp_outw(u16 value, unsigned long port)
 {
-	if (CHECK_AX88796L_PORT(port))
-		maybebadio(port);
-	else if (PXSEG(port))
-		ctrl_outw(value, port);
-	else if (is_pci_ioaddr(port) || shifted_port(port))
+	if (is_pci_ioaddr(port))
 		ctrl_outw(value, pci_ioaddr(port));
 	else
-		maybebadio(port);
+		ctrl_outw(value, port);
 }
 
 void r7780rp_outl(u32 value, unsigned long port)
 {
-	if (CHECK_AX88796L_PORT(port))
-		maybebadio(port);
-	else if (PXSEG(port))
-		ctrl_outl(value, port);
-	else if (is_pci_ioaddr(port) || shifted_port(port))
+	if (is_pci_ioaddr(port))
 		ctrl_outl(value, pci_ioaddr(port));
 	else
-		maybebadio(port);
+		ctrl_outl(value, port);
 }
 
 void r7780rp_insb(unsigned long port, void *dst, unsigned long count)
@@ -183,16 +130,13 @@ void r7780rp_insb(unsigned long port, void *dst, unsigned long count)
 		p = (volatile u16 *)port88796l(port, 0);
 		while (count--)
 			*buf++ = *p & 0xff;
-	} else if (PXSEG(port)) {
-		while (count--)
-			*buf++ = *(volatile u8 *)port;
-	} else if (is_pci_ioaddr(port) || shifted_port(port)) {
+	} else if (is_pci_ioaddr(port)) {
 		volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
 
 		while (count--)
 			*buf++ = *bp;
 	} else {
-		p = (volatile u16 *)port2adr(port);
+		p = (volatile u16 *)port;
 		while (count--)
 			*buf++ = *p & 0xff;
 	}
@@ -205,30 +149,26 @@ void r7780rp_insw(unsigned long port, void *dst, unsigned long count)
 
 	if (CHECK_AX88796L_PORT(port))
 		p = (volatile u16 *)port88796l(port, 1);
-	else if (PXSEG(port))
-		p = (volatile u16 *)port;
-	else if (is_pci_ioaddr(port) || shifted_port(port))
+	else if (is_pci_ioaddr(port))
 		p = (volatile u16 *)pci_ioaddr(port);
 	else
-		p = (volatile u16 *)port2adr(port);
+		p = (volatile u16 *)port;
 
 	while (count--)
 		*buf++ = *p;
+
+	flush_dcache_all();
 }
 
 void r7780rp_insl(unsigned long port, void *dst, unsigned long count)
 {
-	u32 *buf = dst;
-
-	if (CHECK_AX88796L_PORT(port))
-		maybebadio(port);
-	else if (is_pci_ioaddr(port) || shifted_port(port)) {
+	if (is_pci_ioaddr(port)) {
 		volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
+		u32 *buf = dst;
 
 		while (count--)
 			*buf++ = *p;
-	} else
-		maybebadio(port);
+	}
 }
 
 void r7780rp_outsb(unsigned long port, const void *src, unsigned long count)
@@ -240,19 +180,14 @@ void r7780rp_outsb(unsigned long port, const void *src, unsigned long count)
 		p = (volatile u16 *)port88796l(port, 0);
 		while (count--)
 			*p = *buf++;
-	} else if (PXSEG(port))
-		while (count--)
-			ctrl_outb(*buf++, port);
-	else if (is_pci_ioaddr(port) || shifted_port(port)) {
+	} else if (is_pci_ioaddr(port)) {
 		volatile u8 *bp = (volatile u8 *)pci_ioaddr(port);
 
 		while (count--)
 			*bp = *buf++;
-	} else {
-		p = (volatile u16 *)port2adr(port);
+	} else
 		while (count--)
-			*p = *buf++;
-	}
+			ctrl_outb(*buf++, port);
 }
 
 void r7780rp_outsw(unsigned long port, const void *src, unsigned long count)
@@ -262,40 +197,37 @@ void r7780rp_outsw(unsigned long port, const void *src, unsigned long count)
 
 	if (CHECK_AX88796L_PORT(port))
 		p = (volatile u16 *)port88796l(port, 1);
-	else if (PXSEG(port))
-		p = (volatile u16 *)port;
-	else if (is_pci_ioaddr(port) || shifted_port(port))
+	else if (is_pci_ioaddr(port))
 		p = (volatile u16 *)pci_ioaddr(port);
 	else
-		p = (volatile u16 *)port2adr(port);
+		p = (volatile u16 *)port;
 
 	while (count--)
 		*p = *buf++;
+
+	flush_dcache_all();
 }
 
 void r7780rp_outsl(unsigned long port, const void *src, unsigned long count)
 {
 	const u32 *buf = src;
+	u32 *p;
 
-	if (CHECK_AX88796L_PORT(port))
-		maybebadio(port);
-	else if (is_pci_ioaddr(port) || shifted_port(port)) {
-		volatile u32 *p = (volatile u32 *)pci_ioaddr(port);
+	if (is_pci_ioaddr(port))
+		p = (u32 *)pci_ioaddr(port);
+	else
+		p = (u32 *)port;
 
-		while (count--)
-			*p = *buf++;
-	} else
-		maybebadio(port);
+	while (count--)
+		ctrl_outl(*buf++, (unsigned long)p);
 }
 
 void __iomem *r7780rp_ioport_map(unsigned long port, unsigned int size)
 {
 	if (CHECK_AX88796L_PORT(port))
 		return (void __iomem *)port88796l(port, size > 1);
-	else if (PXSEG(port))
-		return (void __iomem *)port;
-	else if (is_pci_ioaddr(port) || shifted_port(port))
+	else if (is_pci_ioaddr(port))
 		return (void __iomem *)pci_ioaddr(port);
 
-	return (void __iomem *)port2adr(port);
+	return (void __iomem *)port;
 }

arch/sh/boards/renesas/r7780rp/led.c

-/*
- * Copyright (C) Atom Create Engineering Co., Ltd.
- *
- * May be copied or modified under the terms of GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * This file contains Renesas Solutions HIGHLANDER R7780RP-1 specific LED code.
- */
-#include <linux/sched.h>
-#include <asm/io.h>
-#include <asm/r7780rp/r7780rp.h>
-
-/* Cycle the LED's in the clasic Knightriger/Sun pattern */
-void heartbeat_r7780rp(void)
-{
-	static unsigned int cnt = 0, period = 0;
-	volatile unsigned short *p = (volatile unsigned short *)PA_OBLED;
-	static unsigned bit = 0, up = 1;
-	unsigned bit_pos[] = {2, 1, 0, 3, 6, 5, 4, 7};
-
-	cnt += 1;
-	if (cnt < period)
-		return;
-
-	cnt = 0;
-
-	/* Go through the points (roughly!):
-	 * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110
-	 */
-	period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3<<FSHIFT)));
-
-	*p = 1 << bit_pos[bit];
-	if (up)
-		if (bit == 7) {
-			bit--;
-			up = 0;
-		} else
-			bit++;
-	else if (bit == 0)
-		up = 1;
-	else
-		bit--;
-}

arch/sh/boards/renesas/r7780rp/setup.c

@@ -2,7 +2,7 @@
  * arch/sh/boards/renesas/r7780rp/setup.c
  *
  * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2005, 2006 Paul Mundt
+ * Copyright (C) 2005 - 2007 Paul Mundt
  *
  * Renesas Solutions Highlander R7780RP-1 Support.
  *
@@ -12,12 +12,12 @@
  */
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/pata_platform.h>
 #include <asm/machvec.h>
 #include <asm/r7780rp.h>
 #include <asm/clock.h>
 #include <asm/io.h>
 
-extern void heartbeat_r7780rp(void);
 extern void init_r7780rp_IRQ(void);
 
 static struct resource m66596_usb_host_resources[] = {
@@ -46,14 +46,14 @@ static struct platform_device m66596_usb_host_device = {
 
 static struct resource cf_ide_resources[] = {
 	[0] = {
-		.start	= 0x1f0,
-		.end	= 0x1f0 + 8,
-		.flags	= IORESOURCE_IO,
+		.start	= PA_AREA5_IO + 0x1000,
+		.end	= PA_AREA5_IO + 0x1000 + 0x08 - 1,
+		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= 0x1f0 + 0x206,
-		.end	= 0x1f0 + 8 + 0x206 + 8,
-		.flags	= IORESOURCE_IO,
+		.start	= PA_AREA5_IO + 0x80c,
+		.end	= PA_AREA5_IO + 0x80c + 0x16 - 1,
+		.flags	= IORESOURCE_MEM,
 	},
 	[2] = {
 #ifdef CONFIG_SH_R7780MP
@@ -65,16 +65,44 @@ static struct resource cf_ide_resources[] = {
 	},
 };
 
+static struct pata_platform_info pata_info = {
+	.ioport_shift	= 1,
+};
+
 static struct platform_device cf_ide_device  = {
 	.name		= "pata_platform",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(cf_ide_resources),
 	.resource	= cf_ide_resources,
+	.dev	= {
+		.platform_data	= &pata_info,
+	},
+};
+
+static unsigned char heartbeat_bit_pos[] = { 2, 1, 0, 3, 6, 5, 4, 7 };
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_OBLED,
+		.end	= PA_OBLED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= heartbeat_bit_pos,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
 };
 
 static struct platform_device *r7780rp_devices[] __initdata = {
 	&m66596_usb_host_device,
 	&cf_ide_device,
+	&heartbeat_device,
 };
 
 static int __init r7780rp_devices_setup(void)
@@ -148,7 +176,7 @@ static void __init r7780rp_setup(char **cmdline_p)
 #ifndef CONFIG_SH_R7780MP
 	ctrl_outw(0x0001, PA_SDPOW);	/* SD Power ON */
 #endif
-	ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x0100, PA_IVDRCTL);	/* Si13112 */
+	ctrl_outw(ctrl_inw(PA_IVDRCTL) | 0x01, PA_IVDRCTL);	/* Si13112 */
 
 	pm_power_off = r7780rp_power_off;
 }
@@ -185,8 +213,5 @@ struct sh_machine_vector mv_r7780rp __initmv = {
 
 	.mv_ioport_map		= r7780rp_ioport_map,
 	.mv_init_irq		= init_r7780rp_IRQ,
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_r7780rp,
-#endif
 };
 ALIAS_MV(r7780rp)

arch/sh/boards/renesas/rts7751r2d/Makefile

@@ -2,5 +2,4 @@
 # Makefile for the RTS7751R2D specific parts of the kernel
 #
 
-obj-y	 := setup.o io.o irq.o
-obj-$(CONFIG_HEARTBEAT) += led.o
+obj-y	 := setup.o irq.o

arch/sh/boards/renesas/rts7751r2d/io.c

-/*
- * Copyright (C) 2001  Ian da Silva, Jeremy Siegel
- * Based largely on io_se.c.
- *
- * I/O routine for Renesas Technology sales RTS7751R2D.
- *
- * Initial version only to support LAN access; some
- * placeholder code from io_rts7751r2d.c left in with the
- * expectation of later SuperIO and PCMCIA access.
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/io.h>
-#include <asm/rts7751r2d.h>
-#include <asm/addrspace.h>
-
-/*
- * The 7751R RTS7751R2D uses the built-in PCI controller (PCIC)
- * of the 7751R processor, and has a SuperIO accessible via the PCI.
- * The board also includes a PCMCIA controller on its memory bus,
- * like the other Solution Engine boards.
- */
-
-static inline unsigned long port2adr(unsigned int port)
-{
-	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
-		if (port == 0x3f6)
-			return (PA_AREA5_IO + 0x80c);
-		else
-			return (PA_AREA5_IO + 0x1000 + ((port-0x1f0) << 1));
-	else
-		maybebadio((unsigned long)port);
-
-	return port;
-}
-
-static inline unsigned long port88796l(unsigned int port, int flag)
-{
-	unsigned long addr;
-
-	if (flag)
-		addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1);
-	else
-		addr = PA_AX88796L + ((port - AX88796L_IO_BASE) << 1) + 0x1000;
-
-	return addr;
-}
-
-/* The 7751R RTS7751R2D seems to have everything hooked */
-/* up pretty normally (nothing on high-bytes only...) so this */
-/* shouldn't be needed */
-static inline int shifted_port(unsigned long port)
-{
-	/* For IDE registers, value is not shifted */
-	if ((0x1f0 <= port && port < 0x1f8) || port == 0x3f6)
-		return 0;
-	else
-		return 1;
-}
-
-#if defined(CONFIG_NE2000) || defined(CONFIG_NE2000_MODULE)
-#define CHECK_AX88796L_PORT(port) \
-  ((port >= AX88796L_IO_BASE) && (port < (AX88796L_IO_BASE+0x20)))
-#else
-#define CHECK_AX88796L_PORT(port) (0)
-#endif
-
-/*
- * General outline: remap really low stuff [eventually] to SuperIO,
- * stuff in PCI IO space (at or above window at pci.h:PCIBIOS_MIN_IO)
- * is mapped through the PCI IO window.  Stuff with high bits (PXSEG)
- * should be way beyond the window, and is used  w/o translation for
- * compatibility.
- */
-unsigned char rts7751r2d_inb(unsigned long port)
-{
-	if (CHECK_AX88796L_PORT(port))
-		return (*(volatile unsigned short *)port88796l(port, 0)) & 0xff;
-	else if (PXSEG(port))
-		return *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		return *(volatile unsigned char *)pci_ioaddr(port);
-	else
-		return (*(volatile unsigned short *)port2adr(port) & 0xff);
-}
-
-unsigned char rts7751r2d_inb_p(unsigned long port)
-{
-	unsigned char v;
-
-	if (CHECK_AX88796L_PORT(port))
-		v = (*(volatile unsigned short *)port88796l(port, 0)) & 0xff;
-        else if (PXSEG(port))
-		v = *(volatile unsigned char *)port;
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		v = *(volatile unsigned char *)pci_ioaddr(port);
-	else
-		v = (*(volatile unsigned short *)port2adr(port) & 0xff);
-
-	ctrl_delay();
-
-	return v;
-}
-
-unsigned short rts7751r2d_inw(unsigned long port)
-{
-	if (CHECK_AX88796L_PORT(port))
-		maybebadio(port);
-        else if (PXSEG(port))
-		return *(volatile unsigned short *)port;
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		return *(volatile unsigned short *)pci_ioaddr(port);
-	else
-		maybebadio(port);
-
-	return 0;
-}
-
-unsigned int rts7751r2d_inl(unsigned long port)
-{
-	if (CHECK_AX88796L_PORT(port))
-		maybebadio(port);
-        else if (PXSEG(port))
-		return *(volatile unsigned long *)port;
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		return *(volatile unsigned long *)pci_ioaddr(port);
-	else
-		maybebadio(port);
-
-	return 0;
-}
-
-void rts7751r2d_outb(unsigned char value, unsigned long port)
-{
-	if (CHECK_AX88796L_PORT(port))
-		*((volatile unsigned short *)port88796l(port, 0)) = value;
-        else if (PXSEG(port))
-		*(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		*(volatile unsigned char *)pci_ioaddr(port) = value;
-	else
-		*(volatile unsigned short *)port2adr(port) = value;
-}
-
-void rts7751r2d_outb_p(unsigned char value, unsigned long port)
-{
-	if (CHECK_AX88796L_PORT(port))
-		*((volatile unsigned short *)port88796l(port, 0)) = value;
-        else if (PXSEG(port))
-		*(volatile unsigned char *)port = value;
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		*(volatile unsigned char *)pci_ioaddr(port) = value;
-	else
-		*(volatile unsigned short *)port2adr(port) = value;
-
-	ctrl_delay();
-}
-
-void rts7751r2d_outw(unsigned short value, unsigned long port)
-{
-	if (CHECK_AX88796L_PORT(port))
-		maybebadio(port);
-        else if (PXSEG(port))
-		*(volatile unsigned short *)port = value;
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		*(volatile unsigned short *)pci_ioaddr(port) = value;
-	else
-		maybebadio(port);
-}
-
-void rts7751r2d_outl(unsigned int value, unsigned long port)
-{
-	if (CHECK_AX88796L_PORT(port))
-		maybebadio(port);
-        else if (PXSEG(port))
-		*(volatile unsigned long *)port = value;
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		*(volatile unsigned long *)pci_ioaddr(port) = value;
-	else
-		maybebadio(port);
-}
-
-void rts7751r2d_insb(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned long a = (unsigned long)addr;
-	volatile __u8 *bp;
-	volatile __u16 *p;
-
-	if (CHECK_AX88796L_PORT(port)) {
-		p = (volatile unsigned short *)port88796l(port, 0);
-		while (count--)
-			ctrl_outb(*p & 0xff, a++);
-	} else if (PXSEG(port))
-		while (count--)
-			ctrl_outb(ctrl_inb(port), a++);
-	else if (is_pci_ioaddr(port) || shifted_port(port)) {
-		bp = (__u8 *)pci_ioaddr(port);
-		while (count--)
-			ctrl_outb(*bp, a++);
-	} else {
-		p = (volatile unsigned short *)port2adr(port);
-		while (count--)
-			ctrl_outb(*p & 0xff, a++);
-	}
-}
-
-void rts7751r2d_insw(unsigned long port, void *addr, unsigned long count)
-{
-	unsigned long a = (unsigned long)addr;
-	volatile __u16 *p;
-
-	if (CHECK_AX88796L_PORT(port))
-		p = (volatile unsigned short *)port88796l(port, 1);
-	else if (PXSEG(port))
-		p = (volatile unsigned short *)port;
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		p = (volatile unsigned short *)pci_ioaddr(port);
-	else
-		p = (volatile unsigned short *)port2adr(port);
-	while (count--)
-		ctrl_outw(*p, a++);
-}
-
-void rts7751r2d_insl(unsigned long port, void *addr, unsigned long count)
-{
-	if (CHECK_AX88796L_PORT(port))
-		maybebadio(port);
-	else if (is_pci_ioaddr(port) || shifted_port(port)) {
-		unsigned long a = (unsigned long)addr;
-
-		while (count--) {
-			ctrl_outl(ctrl_inl(pci_ioaddr(port)), a);
-			a += 4;
-		}
-	} else
-		maybebadio(port);
-}
-
-void rts7751r2d_outsb(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned long a = (unsigned long)addr;
-	volatile __u8 *bp;
-	volatile __u16 *p;
-
-	if (CHECK_AX88796L_PORT(port)) {
-		p = (volatile unsigned short *)port88796l(port, 0);
-		while (count--)
-			*p = ctrl_inb(a++);
-	} else if (PXSEG(port))
-		while (count--)
-			ctrl_outb(a++, port);
-	else if (is_pci_ioaddr(port) || shifted_port(port)) {
-		bp = (__u8 *)pci_ioaddr(port);
-		while (count--)
-			*bp = ctrl_inb(a++);
-	} else {
-		p = (volatile unsigned short *)port2adr(port);
-		while (count--)
-			*p = ctrl_inb(a++);
-	}
-}
-
-void rts7751r2d_outsw(unsigned long port, const void *addr, unsigned long count)
-{
-	unsigned long a = (unsigned long)addr;
-	volatile __u16 *p;
-
-	if (CHECK_AX88796L_PORT(port))
-		p = (volatile unsigned short *)port88796l(port, 1);
-	else if (PXSEG(port))
-		p = (volatile unsigned short *)port;
-	else if (is_pci_ioaddr(port) || shifted_port(port))
-		p = (volatile unsigned short *)pci_ioaddr(port);
-	else
-		p = (volatile unsigned short *)port2adr(port);
-
-	while (count--) {
-		ctrl_outw(*p, a);
-		a += 2;
-	}
-}
-
-void rts7751r2d_outsl(unsigned long port, const void *addr, unsigned long count)
-{
-	if (CHECK_AX88796L_PORT(port))
-		maybebadio(port);
-	else if (is_pci_ioaddr(port) || shifted_port(port)) {
-		unsigned long a = (unsigned long)addr;
-
-		while (count--) {
-			ctrl_outl(ctrl_inl(a), pci_ioaddr(port));
-			a += 4;
-		}
-	} else
-		maybebadio(port);
-}
-
-unsigned long rts7751r2d_isa_port2addr(unsigned long offset)
-{
-	return port2adr(offset);
-}

arch/sh/boards/renesas/rts7751r2d/irq.c

@@ -9,7 +9,9 @@
  * Atom Create Engineering Co., Ltd. 2002.
  */
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/irq.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <asm/rts7751r2d.h>
 
@@ -22,79 +24,31 @@ static int mask_pos[] = {6, 11, 9, 8, 12, 10, 5, 4, 7, 14, 13, 0, 0, 0, 0};
 extern int voyagergx_irq_demux(int irq);
 extern void setup_voyagergx_irq(void);
 
-static void enable_rts7751r2d_irq(unsigned int irq);
-static void disable_rts7751r2d_irq(unsigned int irq);
-
-/* shutdown is same as "disable" */
-#define shutdown_rts7751r2d_irq disable_rts7751r2d_irq
-
-static void ack_rts7751r2d_irq(unsigned int irq);
-static void end_rts7751r2d_irq(unsigned int irq);
-
-static unsigned int startup_rts7751r2d_irq(unsigned int irq)
+static void enable_rts7751r2d_irq(unsigned int irq)
 {
-	enable_rts7751r2d_irq(irq);
-	return 0; /* never anything pending */
+	/* Set priority in IPR back to original value */
+	ctrl_outw(ctrl_inw(IRLCNTR1) | (1 << mask_pos[irq]), IRLCNTR1);
 }
 
 static void disable_rts7751r2d_irq(unsigned int irq)
 {
-	unsigned short val;
-	unsigned short mask = 0xffff ^ (0x0001 << mask_pos[irq]);
-
 	/* Set the priority in IPR to 0 */
-	val = ctrl_inw(IRLCNTR1);
-	val &= mask;
-	ctrl_outw(val, IRLCNTR1);
-}
-
-static void enable_rts7751r2d_irq(unsigned int irq)
-{
-	unsigned short val;
-	unsigned short value = (0x0001 << mask_pos[irq]);
-
-	/* Set priority in IPR back to original value */
-	val = ctrl_inw(IRLCNTR1);
-	val |= value;
-	ctrl_outw(val, IRLCNTR1);
+	ctrl_outw(ctrl_inw(IRLCNTR1) & (0xffff ^ (1 << mask_pos[irq])),
+		  IRLCNTR1);
 }
 
 int rts7751r2d_irq_demux(int irq)
 {
-	int demux_irq;
-
-	demux_irq = voyagergx_irq_demux(irq);
-	return demux_irq;
-}
-
-static void ack_rts7751r2d_irq(unsigned int irq)
-{
-	disable_rts7751r2d_irq(irq);
+	return voyagergx_irq_demux(irq);
 }
 
-static void end_rts7751r2d_irq(unsigned int irq)
-{
-	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
-		enable_rts7751r2d_irq(irq);
-}
-
-static struct hw_interrupt_type rts7751r2d_irq_type = {
-	.typename = "RTS7751R2D IRQ",
-	.startup = startup_rts7751r2d_irq,
-	.shutdown = shutdown_rts7751r2d_irq,
-	.enable = enable_rts7751r2d_irq,
-	.disable = disable_rts7751r2d_irq,
-	.ack = ack_rts7751r2d_irq,
-	.end = end_rts7751r2d_irq,
+static struct irq_chip rts7751r2d_irq_chip __read_mostly = {
+	.name		= "rts7751r2d",
+	.mask		= disable_rts7751r2d_irq,
+	.unmask		= enable_rts7751r2d_irq,
+	.mask_ack	= disable_rts7751r2d_irq,
 };
 
-static void make_rts7751r2d_irq(unsigned int irq)
-{
-	disable_irq_nosync(irq);
-	irq_desc[irq].chip = &rts7751r2d_irq_type;
-	disable_rts7751r2d_irq(irq);
-}
-
 /*
  * Initialize IRQ setting
  */
@@ -119,8 +73,12 @@ void __init init_rts7751r2d_IRQ(void)
 	 * IRL14=Extention #3
 	 */
 
-	for (i=0; i<15; i++)
-		make_rts7751r2d_irq(i);
+	for (i=0; i<15; i++) {
+		disable_irq_nosync(i);
+		set_irq_chip_and_handler_name(i, &rts7751r2d_irq_chip,
+					      handle_level_irq, "level");
+		enable_rts7751r2d_irq(i);
+	}
 
 	setup_voyagergx_irq();
 }

arch/sh/boards/renesas/rts7751r2d/led.c

-/*
- * linux/arch/sh/boards/renesas/rts7751r2d/led.c
- *
- * Copyright (C) Atom Create Engineering Co., Ltd.
- *
- * May be copied or modified under the terms of GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * This file contains Renesas Technology Sales RTS7751R2D specific LED code.
- */
-#include <linux/io.h>
-#include <linux/sched.h>
-#include <asm/rts7751r2d.h>
-
-/* Cycle the LED's in the clasic Knightriger/Sun pattern */
-void heartbeat_rts7751r2d(void)
-{
-	static unsigned int cnt = 0, period = 0;
-	volatile unsigned short *p = (volatile unsigned short *)PA_OUTPORT;
-	static unsigned bit = 0, up = 1;
-
-	cnt += 1;
-	if (cnt < period)
-		return;
-
-	cnt = 0;
-
-	/* Go through the points (roughly!):
-	 * f(0)=10, f(1)=16, f(2)=20, f(5)=35, f(int)->110
-	 */
-	period = 110 - ((300 << FSHIFT)/((avenrun[0]/5) + (3<<FSHIFT)));
-
-	*p = 1 << bit;
-	if (up)
-		if (bit == 7) {
-			bit--;
-			up = 0;
-		} else
-			bit++;
-	else if (bit == 0)
-		up = 1;
-	else
-		bit--;
-}

arch/sh/boards/renesas/rts7751r2d/setup.c

 /*
  * Renesas Technology Sales RTS7751R2D Support.
  *
- * Copyright (C) 2002 Atom Create Engineering Co., Ltd.
- * Copyright (C) 2004 - 2006 Paul Mundt
+ * Copyright (C) 2002 - 2006 Atom Create Engineering Co., Ltd.
+ * Copyright (C) 2004 - 2007 Paul Mundt
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
@@ -10,33 +10,13 @@
  */
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/pata_platform.h>
 #include <linux/serial_8250.h>
 #include <linux/pm.h>
 #include <asm/machvec.h>
-#include <asm/mach/rts7751r2d.h>
-#include <asm/io.h>
+#include <asm/rts7751r2d.h>
 #include <asm/voyagergx.h>
-
-extern void heartbeat_rts7751r2d(void);
-extern void init_rts7751r2d_IRQ(void);
-extern int rts7751r2d_irq_demux(int irq);
-
-extern void *voyagergx_consistent_alloc(struct device *, size_t, dma_addr_t *, gfp_t);
-extern int voyagergx_consistent_free(struct device *, size_t, void *, dma_addr_t);
-
-static struct plat_serial8250_port uart_platform_data[] = {
-	{
-		.membase	= (void *)VOYAGER_UART_BASE,
-		.mapbase	= VOYAGER_UART_BASE,
-		.iotype		= UPIO_MEM,
-		.irq		= VOYAGER_UART0_IRQ,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.regshift	= 2,
-		.uartclk	= (9600 * 16),
-	}, {
-		.flags		= 0,
-	},
-};
+#include <asm/io.h>
 
 static void __init voyagergx_serial_init(void)
 {
@@ -45,32 +25,96 @@ static void __init voyagergx_serial_init(void)
 	/*
 	 * GPIO Control
 	 */
-	val = inl(GPIO_MUX_HIGH);
+	val = readl((void __iomem *)GPIO_MUX_HIGH);
 	val |= 0x00001fe0;
-	outl(val, GPIO_MUX_HIGH);
+	writel(val, (void __iomem *)GPIO_MUX_HIGH);
 
 	/*
 	 * Power Mode Gate
 	 */
-	val = inl(POWER_MODE0_GATE);
+	val = readl((void __iomem *)POWER_MODE0_GATE);
 	val |= (POWER_MODE0_GATE_U0 | POWER_MODE0_GATE_U1);
-	outl(val, POWER_MODE0_GATE);
+	writel(val, (void __iomem *)POWER_MODE0_GATE);
 
-	val = inl(POWER_MODE1_GATE);
+	val = readl((void __iomem *)POWER_MODE1_GATE);
 	val |= (POWER_MODE1_GATE_U0 | POWER_MODE1_GATE_U1);
-	outl(val, POWER_MODE1_GATE);
+	writel(val, (void __iomem *)POWER_MODE1_GATE);
 }
 
+static struct resource cf_ide_resources[] = {
+	[0] = {
+		.start	= PA_AREA5_IO + 0x1000,
+		.end	= PA_AREA5_IO + 0x1000 + 0x08 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= PA_AREA5_IO + 0x80c,
+		.end	= PA_AREA5_IO + 0x80c + 0x16 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+#ifdef CONFIG_RTS7751R2D_REV11
+		.start	= 1,
+#else
+		.start	= 2,
+#endif
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct pata_platform_info pata_info = {
+	.ioport_shift	= 1,
+};
+
+static struct platform_device cf_ide_device  = {
+	.name		= "pata_platform",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(cf_ide_resources),
+	.resource	= cf_ide_resources,
+	.dev	= {
+		.platform_data	= &pata_info,
+	},
+};
+
+static struct plat_serial8250_port uart_platform_data[] = {
+	{
+		.membase	= (void __iomem *)VOYAGER_UART_BASE,
+		.mapbase	= VOYAGER_UART_BASE,
+		.iotype		= UPIO_MEM,
+		.irq		= VOYAGER_UART0_IRQ,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.regshift	= 2,
+		.uartclk	= (9600 * 16),
+	}
+};
+
 static struct platform_device uart_device = {
 	.name		= "serial8250",
-	.id		= -1,
+	.id		= PLAT8250_DEV_PLATFORM,
 	.dev		= {
 		.platform_data	= uart_platform_data,
 	},
 };
 
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_OUTPORT,
+		.end	= PA_OUTPORT + 8 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
 static struct platform_device *rts7751r2d_devices[] __initdata = {
 	&uart_device,
+	&heartbeat_device,
+	&cf_ide_device,
 };
 
 static int __init rts7751r2d_devices_setup(void)
@@ -78,6 +122,7 @@ static int __init rts7751r2d_devices_setup(void)
 	return platform_add_devices(rts7751r2d_devices,
 				    ARRAY_SIZE(rts7751r2d_devices));
 }
+__initcall(rts7751r2d_devices_setup);
 
 static void rts7751r2d_power_off(void)
 {
@@ -89,14 +134,17 @@ static void rts7751r2d_power_off(void)
  */
 static void __init rts7751r2d_setup(char **cmdline_p)
 {
-	device_initcall(rts7751r2d_devices_setup);
+	u16 ver = ctrl_inw(PA_VERREG);
+
+	printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
+
+	printk(KERN_INFO "FPGA version:%d (revision:%d)\n",
+					(ver >> 4) & 0xf, ver & 0xf);
 
 	ctrl_outw(0x0000, PA_OUTPORT);
 	pm_power_off = rts7751r2d_power_off;
 
 	voyagergx_serial_init();
-
-	printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
 }
 
 /*
@@ -107,31 +155,7 @@ struct sh_machine_vector mv_rts7751r2d __initmv = {
 	.mv_setup		= rts7751r2d_setup,
 	.mv_nr_irqs		= 72,
 
-	.mv_inb			= rts7751r2d_inb,
-	.mv_inw			= rts7751r2d_inw,
-	.mv_inl			= rts7751r2d_inl,
-	.mv_outb		= rts7751r2d_outb,
-	.mv_outw		= rts7751r2d_outw,
-	.mv_outl		= rts7751r2d_outl,
-
-	.mv_inb_p		= rts7751r2d_inb_p,
-	.mv_inw_p		= rts7751r2d_inw,
-	.mv_inl_p		= rts7751r2d_inl,
-	.mv_outb_p		= rts7751r2d_outb_p,
-	.mv_outw_p		= rts7751r2d_outw,
-	.mv_outl_p		= rts7751r2d_outl,
-
-	.mv_insb		= rts7751r2d_insb,
-	.mv_insw		= rts7751r2d_insw,
-	.mv_insl		= rts7751r2d_insl,
-	.mv_outsb		= rts7751r2d_outsb,
-	.mv_outsw		= rts7751r2d_outsw,
-	.mv_outsl		= rts7751r2d_outsl,
-
 	.mv_init_irq		= init_rts7751r2d_IRQ,
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_rts7751r2d,
-#endif
 	.mv_irq_demux		= rts7751r2d_irq_demux,
 
 #ifdef CONFIG_USB_SM501

arch/sh/boards/se/7206/Makefile

@@ -3,5 +3,3 @@
 #
 
 obj-y	 := setup.o io.o irq.o
-obj-$(CONFIG_HEARTBEAT) += led.o
-

arch/sh/boards/se/7206/led.c

-/*
- * linux/arch/sh/kernel/led_se.c
- *
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * This file contains Solution Engine specific LED code.
- */
-
-#include <linux/config.h>
-#include <asm/se7206.h>
-
-#ifdef CONFIG_HEARTBEAT
-
-#include <linux/sched.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_se(void)
-{
-	static unsigned int cnt = 0, period = 0;
-	volatile unsigned short* p = (volatile unsigned short*)PA_LED;
-	static unsigned bit = 0, up = 1;
-
-	cnt += 1;
-	if (cnt < period) {
-		return;
-	}
-
-	cnt = 0;
-
-	/* Go through the points (roughly!):
-	 * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
-	 */
-	period = 110 - ( (300<<FSHIFT)/
-			 ((avenrun[0]/5) + (3<<FSHIFT)) );
-
-	if (up) {
-		if (bit == 7) {
-			bit--;
-			up=0;
-		} else {
-			bit ++;
-		}
-	} else {
-		if (bit == 0) {
-			bit++;
-			up=1;
-		} else {
-			bit--;
-		}
-	}
-	*p = 1<<(bit+8);
-
-}
-#endif /* CONFIG_HEARTBEAT */

arch/sh/boards/se/7206/setup.c

@@ -3,6 +3,7 @@
  * linux/arch/sh/boards/se/7206/setup.c
  *
  * Copyright (C) 2006  Yoshinori Sato
+ * Copyright (C) 2007  Paul Mundt
  *
  * Hitachi 7206 SolutionEngine Support.
  *
@@ -34,15 +35,37 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= heartbeat_bit_pos,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *se7206_devices[] __initdata = {
+	&smc91x_device,
+	&heartbeat_device,
+};
+
 static int __init se7206_devices_setup(void)
 {
-	return platform_device_register(&smc91x_device);
+	return platform_add_devices(se7206_devices, ARRAY_SIZE(se7206_devices));
 }
-
 __initcall(se7206_devices_setup);
 
-void heartbeat_se(void);
-
 /*
  * The Machine Vector
  */
@@ -72,8 +95,5 @@ struct sh_machine_vector mv_se __initmv = {
 	.mv_outsl		= se7206_outsl,
 
 	.mv_init_irq		= init_se7206_IRQ,
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_se,
-#endif
 };
 ALIAS_MV(se)

arch/sh/boards/se/7300/Makefile

@@ -3,5 +3,3 @@
 #
 
 obj-y	 := setup.o io.o irq.o
-
-obj-$(CONFIG_HEARTBEAT) += led.o

arch/sh/boards/se/7300/led.c

-/*
- * linux/arch/sh/boards/se/7300/led.c
- *
- * Derived from linux/arch/sh/boards/se/770x/led.c
- *
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * This file contains Solution Engine specific LED code.
- */
-
-#include <linux/sched.h>
-#include <asm/se7300.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_7300se(void)
-{
-	static unsigned int cnt = 0, period = 0;
-	volatile unsigned short *p = (volatile unsigned short *) PA_LED;
-	static unsigned bit = 0, up = 1;
-
-	cnt += 1;
-	if (cnt < period) {
-		return;
-	}
-
-	cnt = 0;
-
-	/* Go through the points (roughly!):
-	 * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
-	 */
-	period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT)));
-
-	if (up) {
-		if (bit == 7) {
-			bit--;
-			up = 0;
-		} else {
-			bit++;
-		}
-	} else {
-		if (bit == 0) {
-			bit++;
-			up = 1;
-		} else {
-			bit--;
-		}
-	}
-	*p = 1 << (bit + 8);
-
-}
-

arch/sh/boards/se/7300/setup.c

@@ -6,14 +6,43 @@
  * SH-Mobile SolutionEngine 7300 Support.
  *
  */
-
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <asm/machvec.h>
 #include <asm/se7300.h>
 
-void heartbeat_7300se(void);
 void init_7300se_IRQ(void);
 
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= heartbeat_bit_pos,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *se7300_devices[] __initdata = {
+	&heartbeat_device,
+};
+
+static int __init se7300_devices_setup(void)
+{
+	return platform_add_devices(se7300_devices, ARRAY_SIZE(se7300_devices));
+}
+__initcall(se7300_devices_setup);
+
 /*
  * The Machine Vector
  */
@@ -42,8 +71,5 @@ struct sh_machine_vector mv_7300se __initmv = {
 	.mv_outsl = sh7300se_outsl,
 
 	.mv_init_irq = init_7300se_IRQ,
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat = heartbeat_7300se,
-#endif
 };
 ALIAS_MV(7300se)

arch/sh/boards/se/73180/Makefile

@@ -3,5 +3,3 @@
 #
 
 obj-y	 := setup.o io.o irq.o
-
-obj-$(CONFIG_HEARTBEAT) += led.o

arch/sh/boards/se/73180/led.c

-/*
- * arch/sh/boards/se/73180/led.c
- *
- * Derived from arch/sh/boards/se/770x/led.c
- *
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * This file contains Solution Engine specific LED code.
- */
-
-#include <linux/sched.h>
-#include <asm/mach/se73180.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_73180se(void)
-{
-	static unsigned int cnt = 0, period = 0;
-	volatile unsigned short *p = (volatile unsigned short *) PA_LED;
-	static unsigned bit = 0, up = 1;
-
-	cnt += 1;
-	if (cnt < period) {
-		return;
-	}
-
-	cnt = 0;
-
-	/* Go through the points (roughly!):
-	 * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
-	 */
-	period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT)));
-
-	if (up) {
-		if (bit == 7) {
-			bit--;
-			up = 0;
-		} else {
-			bit++;
-		}
-	} else {
-		if (bit == 0) {
-			bit++;
-			up = 1;
-		} else {
-			bit--;
-		}
-	}
-	*p = 1 << (bit + LED_SHIFT);
-
-}

arch/sh/boards/se/73180/setup.c

@@ -10,13 +10,39 @@
  */
 
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <asm/machvec.h>
 #include <asm/se73180.h>
 #include <asm/irq.h>
 
-void heartbeat_73180se(void);
 void init_73180se_IRQ(void);
 
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED + 8 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *se73180_devices[] __initdata = {
+	&heartbeat_device,
+};
+
+static int __init se73180_devices_setup(void)
+{
+	return platform_add_devices(sh7343se_platform_devices,
+				    ARRAY_SIZE(sh7343se_platform_devices));
+}
+__initcall(se73180_devices_setup);
+
 /*
  * The Machine Vector
  */
@@ -46,8 +72,5 @@ struct sh_machine_vector mv_73180se __initmv = {
 
 	.mv_init_irq = init_73180se_IRQ,
 	.mv_irq_demux = shmse_irq_demux,
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat = heartbeat_73180se,
-#endif
 };
 ALIAS_MV(73180se)

arch/sh/boards/se/7343/Makefile

@@ -3,5 +3,3 @@
 #
 
 obj-y	 := setup.o io.o irq.o
-
-obj-$(CONFIG_HEARTBEAT) += led.o

arch/sh/boards/se/7343/led.c

-/*
- * arch/sh/boards/se/7343/led.c
- *
- */
-#include <linux/sched.h>
-#include <asm/mach/se7343.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_7343se(void)
-{
-	static unsigned int cnt = 0, period = 0;
-	volatile unsigned short *p = (volatile unsigned short *) PA_LED;
-	static unsigned bit = 0, up = 1;
-
-	cnt += 1;
-	if (cnt < period) {
-		return;
-	}
-
-	cnt = 0;
-
-	/* Go through the points (roughly!):
-	 * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
-	 */
-	period = 110 - ((300 << FSHIFT) / ((avenrun[0] / 5) + (3 << FSHIFT)));
-
-	if (up) {
-		if (bit == 7) {
-			bit--;
-			up = 0;
-		} else {
-			bit++;
-		}
-	} else {
-		if (bit == 0) {
-			bit++;
-			up = 1;
-		} else {
-			bit--;
-		}
-	}
-	*p = 1 << (bit + LED_SHIFT);
-
-}

arch/sh/boards/se/7343/setup.c

@@ -4,7 +4,6 @@
 #include <asm/mach/se7343.h>
 #include <asm/irq.h>
 
-void heartbeat_7343se(void);
 void init_7343se_IRQ(void);
 
 static struct resource smc91x_resources[] = {
@@ -31,14 +30,30 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
-static struct platform_device *smc91x_platform_devices[] __initdata = {
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED + 8 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *sh7343se_platform_devices[] __initdata = {
 	&smc91x_device,
+	&heartbeat_device,
 };
 
 static int __init sh7343se_devices_setup(void)
 {
-	return platform_add_devices(smc91x_platform_devices,
-				    ARRAY_SIZE(smc91x_platform_devices));
+	return platform_add_devices(sh7343se_platform_devices,
+				    ARRAY_SIZE(sh7343se_platform_devices));
 }
 
 static void __init sh7343se_setup(char **cmdline_p)
@@ -76,8 +91,5 @@ struct sh_machine_vector mv_7343se __initmv = {
 
 	.mv_init_irq = init_7343se_IRQ,
 	.mv_irq_demux = shmse_irq_demux,
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat = heartbeat_7343se,
-#endif
 };
 ALIAS_MV(7343se)

arch/sh/boards/se/770x/Makefile

@@ -3,4 +3,3 @@
 #
 
 obj-y	 := setup.o io.o irq.o
-obj-$(CONFIG_HEARTBEAT) += led.o

arch/sh/boards/se/770x/irq.c

@@ -2,56 +2,96 @@
  * linux/arch/sh/boards/se/770x/irq.c
  *
  * Copyright (C) 2000  Kazumoto Kojima
+ * Copyright (C) 2006  Nobuhiro Iwamatsu
  *
  * Hitachi SolutionEngine Support.
  *
  */
 
 #include <linux/init.h>
+#include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/se.h>
 
+/* 
+ * If the problem of make_ipr_irq is solved, 
+ * this code will become unnecessary. :-) 
+ */
+static void se770x_disable_ipr_irq(unsigned int irq)
+{
+	struct ipr_data *p = get_irq_chip_data(irq);
+
+	ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr);
+}
+
+static void se770x_enable_ipr_irq(unsigned int irq)
+{
+	struct ipr_data *p = get_irq_chip_data(irq);
+
+	ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr);
+}
+
+static struct irq_chip se770x_irq_chip = {
+	.name           = "MS770xSE-FPGA",
+	.mask           = se770x_disable_ipr_irq,
+	.unmask         = se770x_enable_ipr_irq,
+	.mask_ack       = se770x_disable_ipr_irq,
+};
+
+void make_se770x_irq(struct ipr_data *table, unsigned int nr_irqs)
+{
+	int i;
+
+	for (i = 0; i < nr_irqs; i++) {
+		unsigned int irq = table[i].irq;
+		disable_irq_nosync(irq);
+		set_irq_chip_and_handler_name(irq, &se770x_irq_chip,
+			handle_level_irq, "level");
+		set_irq_chip_data(irq, &table[i]);
+		se770x_enable_ipr_irq(irq);
+	}
+}
+
 static struct ipr_data se770x_ipr_map[] = {
 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
 	/* This is default value */
-	{ 0xf-0x2, BCR_ILCRA, 2, 0x2 },
-	{ 0xf-0xa, BCR_ILCRA, 1, 0xa },
-	{ 0xf-0x5, BCR_ILCRB, 0, 0x5 },
-	{ 0xf-0x8, BCR_ILCRC, 1, 0x8 },
-	{ 0xf-0xc, BCR_ILCRC, 0, 0xc },
-	{ 0xf-0xe, BCR_ILCRD, 3, 0xe },
-	{ 0xf-0x3, BCR_ILCRD, 1, 0x3 }, /* LAN */
-	{ 0xf-0xd, BCR_ILCRE, 2, 0xd },
-	{ 0xf-0x9, BCR_ILCRE, 1, 0x9 },
-	{ 0xf-0x1, BCR_ILCRE, 0, 0x1 },
-	{ 0xf-0xf, BCR_ILCRF, 3, 0xf },
-	{ 0xf-0xb, BCR_ILCRF, 1, 0xb },
-	{ 0xf-0x7, BCR_ILCRG, 3, 0x7 },
-	{ 0xf-0x6, BCR_ILCRG, 2, 0x6 },
-	{ 0xf-0x4, BCR_ILCRG, 1, 0x4 },
+	{ 0xf-0x2, 0, 8,  0x2 , BCR_ILCRA},
+	{ 0xf-0xa, 0, 4,  0xa , BCR_ILCRA},
+	{ 0xf-0x5, 0, 0,  0x5 , BCR_ILCRB},
+	{ 0xf-0x8, 0, 4,  0x8 , BCR_ILCRC},
+	{ 0xf-0xc, 0, 0,  0xc , BCR_ILCRC},
+	{ 0xf-0xe, 0, 12, 0xe , BCR_ILCRD},
+	{ 0xf-0x3, 0, 4,  0x3 , BCR_ILCRD}, /* LAN */
+	{ 0xf-0xd, 0, 8,  0xd , BCR_ILCRE},
+	{ 0xf-0x9, 0, 4,  0x9 , BCR_ILCRE},
+	{ 0xf-0x1, 0, 0,  0x1 , BCR_ILCRE},
+	{ 0xf-0xf, 0, 12, 0xf , BCR_ILCRF},
+	{ 0xf-0xb, 0, 4,  0xb , BCR_ILCRF},
+	{ 0xf-0x7, 0, 12, 0x7 , BCR_ILCRG},
+	{ 0xf-0x6, 0, 8,  0x6 , BCR_ILCRG},
+	{ 0xf-0x4, 0, 4,  0x4 , BCR_ILCRG},
 #else
-	{ 14, BCR_ILCRA, 2, 0x0f-14 },
-	{ 12, BCR_ILCRA, 1, 0x0f-12 },
-	{  8, BCR_ILCRB, 1, 0x0f- 8 },
-	{  6, BCR_ILCRC, 3, 0x0f- 6 },
-	{  5, BCR_ILCRC, 2, 0x0f- 5 },
-	{  4, BCR_ILCRC, 1, 0x0f- 4 },
-	{  3, BCR_ILCRC, 0, 0x0f- 3 },
-	{  1, BCR_ILCRD, 3, 0x0f- 1 },
-
-	{ 10, BCR_ILCRD, 1, 0x0f-10 }, /* LAN */
-
-	{  0, BCR_ILCRE, 3, 0x0f- 0 }, /* PCIRQ3 */
-	{ 11, BCR_ILCRE, 2, 0x0f-11 }, /* PCIRQ2 */
-	{  9, BCR_ILCRE, 1, 0x0f- 9 }, /* PCIRQ1 */
-	{  7, BCR_ILCRE, 0, 0x0f- 7 }, /* PCIRQ0 */
-
+	{ 14, 0,  8, 0x0f-14 ,BCR_ILCRA},
+	{ 12, 0,  4, 0x0f-12 ,BCR_ILCRA},
+	{  8, 0,  4, 0x0f- 8 ,BCR_ILCRB},
+	{  6, 0, 12, 0x0f- 6 ,BCR_ILCRC},
+	{  5, 0,  8, 0x0f- 5 ,BCR_ILCRC},
+	{  4, 0,  4, 0x0f- 4 ,BCR_ILCRC},
+	{  3, 0,  0, 0x0f- 3 ,BCR_ILCRC},
+	{  1, 0, 12, 0x0f- 1 ,BCR_ILCRD},
+	/* ST NIC */
+	{ 10, 0,  4, 0x0f-10 ,BCR_ILCRD}, 	/* LAN */
+	/* MRSHPC IRQs setting */
+	{  0, 0, 12, 0x0f- 0 ,BCR_ILCRE},	/* PCIRQ3 */
+	{ 11, 0,  8, 0x0f-11 ,BCR_ILCRE}, 	/* PCIRQ2 */
+	{  9, 0,  4, 0x0f- 9 ,BCR_ILCRE}, 	/* PCIRQ1 */
+	{  7, 0,  0, 0x0f- 7 ,BCR_ILCRE}, 	/* PCIRQ0 */
 	/* #2, #13 are allocated for SLOT IRQ #1 and #2 (for now) */
 	/* NOTE: #2 and #13 are not used on PC */
-	{ 13, BCR_ILCRG, 1, 0x0f-13 }, /* SLOTIRQ2 */
-	{  2, BCR_ILCRG, 0, 0x0f- 2 }, /* SLOTIRQ1 */
+	{ 13, 0,  4, 0x0f-13 ,BCR_ILCRG}, 	/* SLOTIRQ2 */
+	{  2, 0,  0, 0x0f- 2 ,BCR_ILCRG}, 	/* SLOTIRQ1 */
 #endif
 };
 
@@ -81,5 +121,5 @@ void __init init_se_IRQ(void)
 	ctrl_outw(0, BCR_ILCRF);
 	ctrl_outw(0, BCR_ILCRG);
 #endif
-	make_ipr_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map));
+	make_se770x_irq(se770x_ipr_map, ARRAY_SIZE(se770x_ipr_map));
 }

arch/sh/boards/se/770x/led.c

-/*
- * linux/arch/sh/boards/se/770x/led.c
- *
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * This file contains Solution Engine specific LED code.
- */
-
-#include <linux/sched.h>
-#include <asm/se.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_se(void)
-{
-	static unsigned int cnt = 0, period = 0;
-	volatile unsigned short* p = (volatile unsigned short*)PA_LED;
-	static unsigned bit = 0, up = 1;
-
-	cnt += 1;
-	if (cnt < period) {
-		return;
-	}
-
-	cnt = 0;
-
-	/* Go through the points (roughly!):
-	 * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
-	 */
-	period = 110 - ( (300<<FSHIFT)/
-			 ((avenrun[0]/5) + (3<<FSHIFT)) );
-
-	if (up) {
-		if (bit == 7) {
-			bit--;
-			up=0;
-		} else {
-			bit ++;
-		}
-	} else {
-		if (bit == 0) {
-			bit++;
-			up=1;
-		} else {
-			bit--;
-		}
-	}
-	*p = 1<<(bit+8);
-
-}

arch/sh/boards/se/770x/setup.c

-/* $Id: setup.c,v 1.1.2.4 2002/03/02 21:57:07 lethal Exp $
- *
+/*
  * linux/arch/sh/boards/se/770x/setup.c
  *
  * Copyright (C) 2000  Kazumoto Kojima
@@ -8,12 +7,12 @@
  *
  */
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <asm/machvec.h>
 #include <asm/se.h>
 #include <asm/io.h>
 #include <asm/smc37c93x.h>
 
-void heartbeat_se(void);
 void init_se_IRQ(void);
 
 /*
@@ -36,11 +35,6 @@ static void __init smsc_setup(char **cmdline_p)
 	smsc_config(ACTIVATE_INDEX, 0x01);
 	smsc_config(IRQ_SELECT_INDEX, 6); /* IRQ6 */
 
-	/* IDE1 */
-	smsc_config(CURRENT_LDN_INDEX, LDN_IDE1);
-	smsc_config(ACTIVATE_INDEX, 0x01);
-	smsc_config(IRQ_SELECT_INDEX, 14); /* IRQ14 */
-
 	/* AUXIO (GPIO): to use IDE1 */
 	smsc_config(CURRENT_LDN_INDEX, LDN_AUXIO);
 	smsc_config(GPIO46_INDEX, 0x00); /* nIOROP */
@@ -69,6 +63,36 @@ static void __init smsc_setup(char **cmdline_p)
 	outb_p(CONFIG_EXIT, CONFIG_PORT);
 }
 
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= heartbeat_bit_pos,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *se_devices[] __initdata = {
+	&heartbeat_device,
+};
+
+static int __init se_devices_setup(void)
+{
+	return platform_add_devices(se_devices, ARRAY_SIZE(se_devices));
+}
+__initcall(se_devices_setup);
+
 /*
  * The Machine Vector
  */
@@ -107,8 +131,5 @@ struct sh_machine_vector mv_se __initmv = {
 	.mv_outsl		= se_outsl,
 
 	.mv_init_irq		= init_se_IRQ,
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_se,
-#endif
 };
 ALIAS_MV(se)

arch/sh/boards/se/7751/Makefile

@@ -5,4 +5,3 @@
 obj-y	 := setup.o io.o irq.o
 
 obj-$(CONFIG_PCI) += pci.o
-obj-$(CONFIG_HEARTBEAT) += led.o

arch/sh/boards/se/7751/led.c

-/*
- * linux/arch/sh/boards/se/7751/led.c
- *
- * Copyright (C) 2000 Stuart Menefy <stuart.menefy@st.com>
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * This file contains Solution Engine specific LED code.
- */
-#include <linux/sched.h>
-#include <asm/se7751.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_7751se(void)
-{
-	static unsigned int cnt = 0, period = 0;
-	volatile unsigned short* p = (volatile unsigned short*)PA_LED;
-	static unsigned bit = 0, up = 1;
-
-	cnt += 1;
-	if (cnt < period) {
-		return;
-	}
-
-	cnt = 0;
-
-	/* Go through the points (roughly!):
-	 * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
-	 */
-	period = 110 - ( (300<<FSHIFT)/
-			 ((avenrun[0]/5) + (3<<FSHIFT)) );
-
-	if (up) {
-		if (bit == 7) {
-			bit--;
-			up=0;
-		} else {
-			bit ++;
-		}
-	} else {
-		if (bit == 0) {
-			bit++;
-			up=1;
-		} else {
-			bit--;
-		}
-	}
-	*p = 1<<(bit+8);
-
-}

arch/sh/boards/se/7751/setup.c

@@ -9,11 +9,11 @@
  * Ian da Silva and Jeremy Siegel, 2001.
  */
 #include <linux/init.h>
+#include <linux/platform_device.h>
 #include <asm/machvec.h>
 #include <asm/se7751.h>
 #include <asm/io.h>
 
-void heartbeat_7751se(void);
 void init_7751se_IRQ(void);
 
 #ifdef CONFIG_SH_KGDB
@@ -161,11 +161,40 @@ static int kgdb_uart_setup(void)
 }
 #endif /* CONFIG_SH_KGDB */
 
+static unsigned char heartbeat_bit_pos[] = { 8, 9, 10, 11, 12, 13, 14, 15 };
+
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= PA_LED,
+		.end	= PA_LED + ARRAY_SIZE(heartbeat_bit_pos) - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.dev	= {
+		.platform_data	= heartbeat_bit_pos,
+	},
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *se7751_devices[] __initdata = {
+	&smc91x_device,
+	&heartbeat_device,
+};
+
+static int __init se7751_devices_setup(void)
+{
+	return platform_add_devices(se7751_devices, ARRAY_SIZE(se7751_devices));
+}
+__initcall(se7751_devices_setup);
 
 /*
  * The Machine Vector
  */
-
 struct sh_machine_vector mv_7751se __initmv = {
 	.mv_name		= "7751 SolutionEngine",
 	.mv_setup		= sh7751se_setup,
@@ -189,8 +218,5 @@ struct sh_machine_vector mv_7751se __initmv = {
 	.mv_outsl		= sh7751se_outsl,
 
 	.mv_init_irq		= init_7751se_IRQ,
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_7751se,
-#endif
 };
 ALIAS_MV(7751se)

arch/sh/boards/sh03/Makefile

@@ -3,4 +3,3 @@
 #
 
 obj-y	 := setup.o rtc.o
-obj-$(CONFIG_HEARTBEAT) += led.o

arch/sh/boards/sh03/led.c

-/*
- * linux/arch/sh/boards/sh03/led.c
- *
- * Copyright (C) 2004  Saito.K Interface Corporation.
- *
- * This file contains Interface CTP/PCI-SH03 specific LED code.
- */
-
-#include <linux/sched.h>
-
-/* Cycle the LED's in the clasic Knightrider/Sun pattern */
-void heartbeat_sh03(void)
-{
-	static unsigned int cnt = 0, period = 0;
-	volatile unsigned char* p = (volatile unsigned char*)0xa0800000;
-	static unsigned bit = 0, up = 1;
-
-	cnt += 1;
-	if (cnt < period) {
-		return;
-	}
-
-	cnt = 0;
-
-	/* Go through the points (roughly!):
-	 * f(0)=10, f(1)=16, f(2)=20, f(5)=35,f(inf)->110
-	 */
-	period = 110 - ( (300<<FSHIFT)/
-			 ((avenrun[0]/5) + (3<<FSHIFT)) );
-
-	if (up) {
-		if (bit == 7) {
-			bit--;
-			up=0;
-		} else {
-			bit ++;
-		}
-	} else {
-		if (bit == 0) {
-			bit++;
-			up=1;
-		} else {
-			bit--;
-		}
-	}
-	*p = 1<<bit;
-
-}

arch/sh/boards/sh03/setup.c

@@ -8,6 +8,7 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/pci.h>
+#include <linux/platform_device.h>
 #include <asm/io.h>
 #include <asm/rtc.h>
 #include <asm/sh03/io.h>
@@ -48,15 +49,36 @@ static void __init sh03_setup(char **cmdline_p)
 	board_time_init = sh03_time_init;
 }
 
+static struct resource heartbeat_resources[] = {
+	[0] = {
+		.start	= 0xa0800000,
+		.end	= 0xa0800000 + 8 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device heartbeat_device = {
+	.name		= "heartbeat",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(heartbeat_resources),
+	.resource	= heartbeat_resources,
+};
+
+static struct platform_device *sh03_devices[] __initdata = {
+	&heartbeat_device,
+};
+
+static int __init sh03_devices_setup(void)
+{
+	return platform_add_devices(sh03_devices, ARRAY_SIZE(sh03_devices));
+}
+__initcall(sh03_devices_setup);
+
 struct sh_machine_vector mv_sh03 __initmv = {
 	.mv_name		= "Interface (CTP/PCI-SH03)",
 	.mv_setup		= sh03_setup,
 	.mv_nr_irqs		= 48,
 	.mv_ioport_map		= sh03_ioport_map,
 	.mv_init_irq		= init_sh03_IRQ,
-
-#ifdef CONFIG_HEARTBEAT
-	.mv_heartbeat		= heartbeat_sh03,
-#endif
 };
 ALIAS_MV(sh03)

arch/sh/boards/shmin/setup.c

@@ -12,12 +12,22 @@
 #include <asm/irq.h>
 #include <asm/io.h>
 
-#define PFC_PHCR	0xa400010e
+#define PFC_PHCR	0xa400010eUL
+#define INTC_ICR1	0xa4000010UL
+#define INTC_IPRC	0xa4000016UL
+
+static struct ipr_data shmin_ipr_map[] = {
+	{ .irq=32, .addr=INTC_IPRC, .shift= 0, .priority=0 },
+	{ .irq=33, .addr=INTC_IPRC, .shift= 4, .priority=0 },
+	{ .irq=34, .addr=INTC_IPRC, .shift= 8, .priority=8 },
+	{ .irq=35, .addr=INTC_IPRC, .shift=12, .priority=0 },
+};
 
 static void __init init_shmin_irq(void)
 {
 	ctrl_outw(0x2a00, PFC_PHCR);	// IRQ0-3=IRQ
 	ctrl_outw(0x0aaa, INTC_ICR1);	// IRQ0-3=IRQ-mode,Low-active.
+	make_ipr_irq(shmin_ipr_map, ARRAY_SIZE(shmin_ipr_map));
 }
 
 static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size)

arch/sh/cchips/voyagergx/irq.c

@@ -28,21 +28,21 @@ static void disable_voyagergx_irq(unsigned int irq)
 	unsigned long val;
 	unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE);
 
-    	pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask);
-        val = inl(VOYAGER_INT_MASK);
-        val &= ~mask;
-        outl(val, VOYAGER_INT_MASK);
+	pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask);
+	val = readl((void __iomem *)VOYAGER_INT_MASK);
+	val &= ~mask;
+	writel(val, (void __iomem *)VOYAGER_INT_MASK);
 }
 
 static void enable_voyagergx_irq(unsigned int irq)
 {
-        unsigned long val;
-        unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE);
+	unsigned long val;
+	unsigned long mask = 1 << (irq - VOYAGER_IRQ_BASE);
 
-        pr_debug("disable_voyagergx_irq(%d): mask=%lx\n", irq, mask);
-        val = inl(VOYAGER_INT_MASK);
-        val |= mask;
-        outl(val, VOYAGER_INT_MASK);
+	pr_debug("disable_voyagergx_irq(%d): mask=%x\n", irq, mask);
+	val = readl((void __iomem *)VOYAGER_INT_MASK);
+	val |= mask;
+	writel(val, (void __iomem *)VOYAGER_INT_MASK);
 }
 
 static void mask_and_ack_voyagergx(unsigned int irq)
@@ -68,20 +68,20 @@ static void shutdown_voyagergx_irq(unsigned int irq)
 }
 
 static struct hw_interrupt_type voyagergx_irq_type = {
-	.typename = "VOYAGERGX-IRQ",
-	.startup = startup_voyagergx_irq,
-	.shutdown = shutdown_voyagergx_irq,
-	.enable = enable_voyagergx_irq,
-	.disable = disable_voyagergx_irq,
-	.ack = mask_and_ack_voyagergx,
-	.end = end_voyagergx_irq,
+	.typename	= "VOYAGERGX-IRQ",
+	.startup	= startup_voyagergx_irq,
+	.shutdown	= shutdown_voyagergx_irq,
+	.enable		= enable_voyagergx_irq,
+	.disable	= disable_voyagergx_irq,
+	.ack		= mask_and_ack_voyagergx,
+	.end		= end_voyagergx_irq,
 };
 
 static irqreturn_t voyagergx_interrupt(int irq, void *dev_id)
 {
 	printk(KERN_INFO
 	       "VoyagerGX: spurious interrupt, status: 0x%x\n",
-	       		inl(INT_STATUS));
+			(unsigned int)readl((void __iomem *)INT_STATUS));
 	return IRQ_HANDLED;
 }
 
@@ -93,13 +93,13 @@ static struct {
 void voyagergx_register_irq_demux(int irq,
 		int (*demux)(int irq, void *dev), void *dev)
 {
-    	voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = demux;
-    	voyagergx_demux[irq - VOYAGER_IRQ_BASE].dev = dev;
+	voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = demux;
+	voyagergx_demux[irq - VOYAGER_IRQ_BASE].dev = dev;
 }
 
 void voyagergx_unregister_irq_demux(int irq)
 {
-    	voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = 0;
+	voyagergx_demux[irq - VOYAGER_IRQ_BASE].func = 0;
 }
 
 int voyagergx_irq_demux(int irq)
@@ -107,31 +107,25 @@ int voyagergx_irq_demux(int irq)
 
 	if (irq == IRQ_VOYAGER ) {
 		unsigned long i = 0, bit __attribute__ ((unused));
-		unsigned long val  = inl(INT_STATUS);
-#if 1
-		if ( val & ( 1 << 1 )){
+		unsigned long val  = readl((void __iomem *)INT_STATUS);
+
+		if (val & (1 << 1))
 			i = 1;
-		} else if ( val & ( 1 << 2 )){
+		else if (val & (1 << 2))
 			i = 2;
-		} else if ( val & ( 1 << 6 )){
+		else if (val & (1 << 6))
 			i = 6;
-		} else if( val & ( 1 << 10 )){
+		else if (val & (1 << 10))
 			i = 10;
-		} else if( val & ( 1 << 11 )){
+		else if (val & (1 << 11))
 			i = 11;
-		} else if( val & ( 1 << 12 )){
+		else if (val & (1 << 12))
 			i = 12;
-		} else if( val & ( 1 << 17 )){
+		else if (val & (1 << 17))
 			i = 17;
-		} else {
+		else
 			printk("Unexpected IRQ irq = %d status = 0x%08lx\n", irq, val);
-		}
-		pr_debug("voyagergx_irq_demux %ld\n", i);
-#else
-		for (bit = 1, i = 0 ; i < VOYAGER_IRQ_NUM ; bit <<= 1, i++)
-			if (val & bit)
-				break;
-#endif
+		pr_debug("voyagergx_irq_demux %d \n", i);
     	    	if (i < VOYAGER_IRQ_NUM) {
 			irq = VOYAGER_IRQ_BASE + i;
     	    		if (voyagergx_demux[i].func != 0)

arch/sh/cchips/voyagergx/setup.c

@@ -19,7 +19,7 @@ static int __init setup_voyagergx(void)
 {
 	unsigned long val;
 
-	val = inl(DRAM_CTRL);
+	val = readl((void __iomem *)DRAM_CTRL);
 	val |= (DRAM_CTRL_CPU_COLUMN_SIZE_256	|
 		DRAM_CTRL_CPU_ACTIVE_PRECHARGE	|
 		DRAM_CTRL_CPU_RESET		|
@@ -29,7 +29,7 @@ static int __init setup_voyagergx(void)
 		DRAM_CTRL_ACTIVE_PRECHARGE	|
 		DRAM_CTRL_RESET			|
 		DRAM_CTRL_REMAIN_ACTIVE);
-	outl(val, DRAM_CTRL);
+	writel(val, (void __iomem *)DRAM_CTRL);
 
 	return 0;
 }

arch/sh/configs/se7750_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.18
-# Tue Oct  3 11:49:01 2006
+# Linux kernel version: 2.6.20-rc2
+# Thu Dec 28 23:15:49 2006
 #
 CONFIG_SUPERH=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
@@ -10,6 +10,11 @@ CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
+# CONFIG_GENERIC_TIME is not set
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
 
 #
@@ -35,6 +40,7 @@ CONFIG_BSD_PROCESS_ACCT=y
 # CONFIG_AUDIT is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED=y
 # CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
@@ -116,6 +122,8 @@ CONFIG_SH_SOLUTION_ENGINE=y
 # CONFIG_SH_LANDISK is not set
 # CONFIG_SH_TITAN is not set
 # CONFIG_SH_SHMIN is not set
+# CONFIG_SH_7206_SOLUTION_ENGINE is not set
+# CONFIG_SH_7619_SOLUTION_ENGINE is not set
 # CONFIG_SH_UNKNOWN is not set
 
 #
@@ -127,6 +135,12 @@ CONFIG_CPU_SH4=y
 # SH-2 Processor Support
 #
 # CONFIG_CPU_SUBTYPE_SH7604 is not set
+# CONFIG_CPU_SUBTYPE_SH7619 is not set
+
+#
+# SH-2A Processor Support
+#
+# CONFIG_CPU_SUBTYPE_SH7206 is not set
 
 #
 # SH-3 Processor Support
@@ -162,12 +176,14 @@ CONFIG_CPU_SUBTYPE_SH7750=y
 #
 # CONFIG_CPU_SUBTYPE_SH7770 is not set
 # CONFIG_CPU_SUBTYPE_SH7780 is not set
+# CONFIG_CPU_SUBTYPE_SH7785 is not set
 
 #
 # SH4AL-DSP Processor Support
 #
 # CONFIG_CPU_SUBTYPE_SH73180 is not set
 # CONFIG_CPU_SUBTYPE_SH7343 is not set
+# CONFIG_CPU_SUBTYPE_SH7722 is not set
 
 #
 # Memory management options
@@ -177,6 +193,9 @@ CONFIG_PAGE_OFFSET=0x80000000
 CONFIG_MEMORY_START=0x0c000000
 CONFIG_MEMORY_SIZE=0x02000000
 CONFIG_VSYSCALL=y
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PAGE_SIZE_64KB is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -202,17 +221,22 @@ CONFIG_CF_BASE_ADDR=0xb8000000
 # Processor features
 #
 CONFIG_CPU_LITTLE_ENDIAN=y
+# CONFIG_CPU_BIG_ENDIAN is not set
 CONFIG_SH_FPU=y
 # CONFIG_SH_DSP is not set
 # CONFIG_SH_STORE_QUEUES is not set
 CONFIG_CPU_HAS_INTEVT=y
+CONFIG_CPU_HAS_IPR_IRQ=y
 CONFIG_CPU_HAS_SR_RB=y
+CONFIG_CPU_HAS_PTEA=y
 
 #
 # Timer support
 #
 CONFIG_SH_TMU=y
-CONFIG_SH_PCLK_FREQ=50000000
+CONFIG_SH_TIMER_IRQ=16
+# CONFIG_NO_IDLE_HZ is not set
+CONFIG_SH_PCLK_FREQ=33333333
 
 #
 # CPU Frequency scaling
@@ -230,11 +254,17 @@ CONFIG_SH_PCLK_FREQ=50000000
 # CONFIG_HD6446X_SERIES is not set
 CONFIG_HEARTBEAT=y
 
+#
+# Additional SuperH Device Drivers
+#
+# CONFIG_PUSH_SWITCH is not set
+
 #
 # Kernel features
 #
 # CONFIG_HZ_100 is not set
 CONFIG_HZ_250=y
+# CONFIG_HZ_300 is not set
 # CONFIG_HZ_1000 is not set
 CONFIG_HZ=250
 # CONFIG_KEXEC is not set
@@ -249,8 +279,7 @@ CONFIG_PREEMPT_NONE=y
 CONFIG_ZERO_PAGE_OFFSET=0x00001000
 CONFIG_BOOT_LINK_OFFSET=0x00800000
 # CONFIG_UBC_WAKEUP is not set
-CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttySC1,38400 root=/dev/nfs ip=bootp"
+# CONFIG_CMDLINE_BOOL is not set
 
 #
 # Bus options
@@ -313,11 +342,13 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
 # CONFIG_IPV6 is not set
 # CONFIG_INET6_XFRM_TUNNEL is not set
 # CONFIG_INET6_TUNNEL is not set
@@ -479,17 +510,80 @@ CONFIG_MTD_ROM=y
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 
+#
+# Misc devices
+#
+# CONFIG_TIFM_CORE is not set
+
 #
 # ATA/ATAPI/MFM/RLL support
 #
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+CONFIG_IDE_MAX_HWIFS=4
+CONFIG_BLK_DEV_IDE=y
+
+#
+# Please see Documentation/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_BLK_DEV_IDEDISK=y
+# CONFIG_IDEDISK_MULTI_MODE is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_BLK_DEV_IDEFLOPPY is not set
+# CONFIG_BLK_DEV_IDESCSI is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_IDE_GENERIC is not set
+# CONFIG_IDE_ARM is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
+# CONFIG_IDEDMA_AUTO is not set
+# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
+CONFIG_SCSI=y
+# CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+# CONFIG_BLK_DEV_SD is not set
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+
+#
+# SCSI low-level drivers
+#
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_DEBUG is not set
 
 #
 # Serial ATA (prod) and Parallel ATA (experimental) drivers
@@ -633,17 +727,12 @@ CONFIG_HW_RANDOM=y
 # CONFIG_GEN_RTC is not set
 # CONFIG_DTLK is not set
 # CONFIG_R3964 is not set
-
-#
-# Ftape, the floppy tape device driver
-#
 # CONFIG_RAW_DRIVER is not set
 
 #
 # TPM devices
 #
 # CONFIG_TCG_TPM is not set
-# CONFIG_TELCLOCK is not set
 
 #
 # I2C support
@@ -659,6 +748,7 @@ CONFIG_HW_RANDOM=y
 #
 # Dallas's 1-wire bus
 #
+# CONFIG_W1 is not set
 
 #
 # Hardware Monitoring support
@@ -667,18 +757,14 @@ CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
 # CONFIG_SENSORS_ABITUGURU is not set
 # CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_PC87427 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_HWMON_DEBUG_CHIP is not set
 
-#
-# Misc devices
-#
-
 #
 # Multimedia devices
 #
 # CONFIG_VIDEO_DEV is not set
-CONFIG_VIDEO_V4L2=y
 
 #
 # Digital Video Broadcasting Devices
@@ -757,15 +843,21 @@ CONFIG_FIRMWARE_EDID=y
 # DMA Devices
 #
 
+#
+# Virtualization
+#
+
 #
 # File systems
 #
 # CONFIG_EXT2_FS is not set
 # CONFIG_EXT3_FS is not set
+# CONFIG_EXT4DEV_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_ROMFS_FS is not set
@@ -814,7 +906,6 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
@@ -874,6 +965,11 @@ CONFIG_PARTITION_ADVANCED=y
 #
 # CONFIG_NLS is not set
 
+#
+# Distributed Lock Manager
+#
+# CONFIG_DLM is not set
+
 #
 # Profiling support
 #
@@ -882,14 +978,16 @@ CONFIG_PARTITION_ADVANCED=y
 #
 # Kernel hacking
 #
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 # CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
+# CONFIG_ENABLE_MUST_CHECK is not set
 # CONFIG_MAGIC_SYSRQ is not set
 # CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_FS is not set
 # CONFIG_SH_STANDARD_BIOS is not set
 # CONFIG_EARLY_SCIF_CONSOLE is not set
 # CONFIG_KGDB is not set
@@ -908,6 +1006,7 @@ CONFIG_LOG_BUF_SHIFT=14
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 CONFIG_CRC32=y
@@ -915,3 +1014,4 @@ CONFIG_CRC32=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_PLIST=y
+CONFIG_IOMAP_COPY=y

arch/sh/drivers/Makefile

@@ -6,3 +6,4 @@ obj-$(CONFIG_PCI)		+= pci/
 obj-$(CONFIG_SH_DMA)		+= dma/
 obj-$(CONFIG_SUPERHYWAY)	+= superhyway/
 obj-$(CONFIG_PUSH_SWITCH)	+= push-switch.o
+obj-$(CONFIG_HEARTBEAT)		+= heartbeat.o

arch/sh/drivers/dma/dma-sh.c

@@ -19,34 +19,26 @@
 #include <asm/io.h>
 #include "dma-sh.h"
 
-
-
-#ifdef CONFIG_CPU_SH4
-static struct ipr_data dmae_ipr_map[] = {
-	{ DMAE_IRQ, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-};
+static int dmte_irq_map[] = {
+	DMTE0_IRQ,
+	DMTE1_IRQ,
+	DMTE2_IRQ,
+	DMTE3_IRQ,
+#if defined(CONFIG_CPU_SUBTYPE_SH7751R) ||	\
+    defined(CONFIG_CPU_SUBTYPE_SH7760)  ||	\
+    defined(CONFIG_CPU_SUBTYPE_SH7780)
+	DMTE4_IRQ,
+	DMTE5_IRQ,
+	DMTE6_IRQ,
+	DMTE7_IRQ,    
 #endif
-static struct ipr_data dmte_ipr_map[] = {
-	/*
-	 * Normally we could just do DMTE0_IRQ + chan outright, though in the
-	 * case of the 7751R, the DMTE IRQs for channels > 4 start right above
-	 * the SCIF
-	 */
-	{ DMTE0_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-	{ DMTE0_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-	{ DMTE0_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-	{ DMTE0_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-	{ DMTE4_IRQ + 0, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-	{ DMTE4_IRQ + 1, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-	{ DMTE4_IRQ + 2, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
-	{ DMTE4_IRQ + 3, DMA_IPR_ADDR, DMA_IPR_POS, DMA_PRIORITY },
 };
 
 static inline unsigned int get_dmte_irq(unsigned int chan)
 {
 	unsigned int irq = 0;
-	if (chan < ARRAY_SIZE(dmte_ipr_map))
-		irq = dmte_ipr_map[chan].irq;
+	if (chan < ARRAY_SIZE(dmte_irq_map))
+		irq = dmte_irq_map[chan];
 	return irq;
 }
 
@@ -103,7 +95,7 @@ static void sh_dmac_free_dma(struct dma_channel *chan)
 	free_irq(get_dmte_irq(chan->chan), chan);
 }
 
-static void
+static int
 sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
 {
 	if (!chcr)
@@ -119,6 +111,7 @@ sh_dmac_configure_channel(struct dma_channel *chan, unsigned long chcr)
 	ctrl_outl(chcr, CHCR[chan->chan]);
 
 	chan->flags |= DMA_CONFIGURED;
+	return 0;
 }
 
 static void sh_dmac_enable_dma(struct dma_channel *chan)
@@ -262,17 +255,11 @@ static int __init sh_dmac_init(void)
 	int i;
 
 #ifdef CONFIG_CPU_SH4
-	make_ipr_irq(dmae_ipr_map, ARRAY_SIZE(dmae_ipr_map));
 	i = request_irq(DMAE_IRQ, dma_err, IRQF_DISABLED, "DMAC Address Error", 0);
 	if (unlikely(i < 0))
 		return i;
 #endif
 
-	i = info->nr_channels;
-	if (i > ARRAY_SIZE(dmte_ipr_map))
-		i = ARRAY_SIZE(dmte_ipr_map);
-	make_ipr_irq(dmte_ipr_map, i);
-
 	/*
 	 * Initialize DMAOR, and clean up any error flags that may have
 	 * been set.

arch/sh/drivers/heartbeat.c

+/*
+ * Generic heartbeat driver for regular LED banks
+ *
+ * Copyright (C) 2007  Paul Mundt
+ *
+ * Most SH reference boards include a number of individual LEDs that can
+ * be independently controlled (either via a pre-defined hardware
+ * function or via the LED class, if desired -- the hardware tends to
+ * encapsulate some of the same "triggers" that the LED class supports,
+ * so there's not too much value in it).
+ *
+ * Additionally, most of these boards also have a LED bank that we've
+ * traditionally used for strobing the load average. This use case is
+ * handled by this driver, rather than giving each LED bit position its
+ * own struct device.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/io.h>
+
+#define DRV_NAME "heartbeat"
+#define DRV_VERSION "0.1.0"
+
+struct heartbeat_data {
+	void __iomem *base;
+	unsigned char bit_pos[8];
+	struct timer_list timer;
+};
+
+static void heartbeat_timer(unsigned long data)
+{
+	struct heartbeat_data *hd = (struct heartbeat_data *)data;
+	static unsigned bit = 0, up = 1;
+
+	ctrl_outw(1 << hd->bit_pos[bit], (unsigned long)hd->base);
+	if (up)
+		if (bit == (ARRAY_SIZE(hd->bit_pos) - 1)) {
+			bit--;
+			up = 0;
+		} else
+			bit++;
+	else if (bit == 0)
+		up = 1;
+	else
+		bit--;
+
+	mod_timer(&hd->timer, jiffies + (110 - ((300 << FSHIFT) /
+			((avenrun[0] / 5) + (3 << FSHIFT)))));
+}
+
+static int heartbeat_drv_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct heartbeat_data *hd;
+
+	if (unlikely(pdev->num_resources != 1)) {
+		dev_err(&pdev->dev, "invalid number of resources\n");
+		return -EINVAL;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (unlikely(res == NULL)) {
+		dev_err(&pdev->dev, "invalid resource\n");
+		return -EINVAL;
+	}
+
+	hd = kmalloc(sizeof(struct heartbeat_data), GFP_KERNEL);
+	if (unlikely(!hd))
+		return -ENOMEM;
+
+	if (pdev->dev.platform_data) {
+		memcpy(hd->bit_pos, pdev->dev.platform_data,
+		       ARRAY_SIZE(hd->bit_pos));
+	} else {
+		int i;
+
+		for (i = 0; i < ARRAY_SIZE(hd->bit_pos); i++)
+			hd->bit_pos[i] = i;
+	}
+
+	hd->base = (void __iomem *)res->start;
+
+	setup_timer(&hd->timer, heartbeat_timer, (unsigned long)hd);
+	platform_set_drvdata(pdev, hd);
+
+	return mod_timer(&hd->timer, jiffies + 1);
+}
+
+static int heartbeat_drv_remove(struct platform_device *pdev)
+{
+	struct heartbeat_data *hd = platform_get_drvdata(pdev);
+
+	del_timer_sync(&hd->timer);
+
+	platform_set_drvdata(pdev, NULL);
+
+	kfree(hd);
+
+	return 0;
+}
+
+static struct platform_driver heartbeat_driver = {
+	.probe		= heartbeat_drv_probe,
+	.remove		= heartbeat_drv_remove,
+	.driver		= {
+		.name	= DRV_NAME,
+	},
+};
+
+static int __init heartbeat_init(void)
+{
+	printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION);
+	return platform_driver_register(&heartbeat_driver);
+}
+
+static void __exit heartbeat_exit(void)
+{
+	platform_driver_unregister(&heartbeat_driver);
+}
+module_init(heartbeat_init);
+module_exit(heartbeat_exit);
+
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR("Paul Mundt");
+MODULE_LICENSE("GPLv2");

arch/sh/drivers/pci/Makefile

@@ -12,7 +12,6 @@ obj-$(CONFIG_CPU_SUBTYPE_SH7780)	+= pci-sh7780.o ops-sh4.o
 obj-$(CONFIG_SH_DREAMCAST)		+= ops-dreamcast.o fixups-dreamcast.o \
 					   dma-dreamcast.o
 obj-$(CONFIG_SH_SECUREEDGE5410)		+= ops-snapgear.o
-obj-$(CONFIG_SH_BIGSUR)			+= ops-bigsur.o
 obj-$(CONFIG_SH_RTS7751R2D)		+= ops-rts7751r2d.o fixups-rts7751r2d.o
 obj-$(CONFIG_SH_SH03)			+= ops-sh03.o fixups-sh03.o
 obj-$(CONFIG_SH_R7780RP)		+= ops-r7780rp.o fixups-r7780rp.o

arch/sh/drivers/pci/ops-bigsur.c

-/*
- * linux/arch/sh/drivers/pci/ops-bigsur.c
- *
- * By Dustin McIntire (dustin@sensoria.com) (c)2001
- *
- * Ported to new API by Paul Mundt <lethal@linux-sh.org>.
- *
- * May be copied or modified under the terms of the GNU General Public
- * License.  See linux/COPYING for more information.
- *
- * PCI initialization for the Hitachi Big Sur Evaluation Board
- */
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <asm/io.h>
-#include "pci-sh4.h"
-#include <asm/bigsur/bigsur.h>
-
-#define BIGSUR_PCI_IO	0x4000
-#define BIGSUR_PCI_MEM	0xfd000000
-
-static struct resource sh7751_io_resource = {
-	.name		= "SH7751 IO",
-	.start		= BIGSUR_PCI_IO,
-	.end		= BIGSUR_PCI_IO + (64*1024) - 1,
-	.flags		= IORESOURCE_IO,
-};
-
-static struct resource sh7751_mem_resource = {
-	.name		= "SH7751 mem",
-	.start		= BIGSUR_PCI_MEM,
-	.end		= BIGSUR_PCI_MEM + (64*1024*1024) - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-extern struct pci_ops sh7751_pci_ops;
-
-struct pci_channel board_pci_channels[] = {
-	{ &sh4_pci_ops, &sh7751_io_resource, &sh7751_mem_resource, 0, 0xff },
-	{ 0, }
-};
-
-static struct sh4_pci_address_map sh7751_pci_map = {
-	.window0	= {
-		.base	= SH7751_CS3_BASE_ADDR,
-		.size	= BIGSUR_LSR0_SIZE,
-	},
-
-	.window1	= {
-		.base	= SH7751_CS3_BASE_ADDR,
-		.size	= BIGSUR_LSR1_SIZE,
-	},
-};
-
-/*
- * Initialize the Big Sur PCI interface
- * Setup hardware to be Central Funtion
- * Copy the BSR regs to the PCI interface
- * Setup PCI windows into local RAM
- */
-int __init pcibios_init_platform(void)
-{
-	return sh7751_pcic_init(&sh7751_pci_map);
-}
-
-int __init pcibios_map_platform_irq(struct pci_dev *pdev, u8 slot, u8 pin)
-{
-	/*
-	 * The Big Sur can be used in a CPCI chassis, but the SH7751 PCI
-	 * interface is on the wrong end of the board so that it can also
-	 * support a V320 CPI interface chip...  Therefor the IRQ mapping is
-	 * somewhat use dependent... I'l assume a linear map for now, i.e.
-	 * INTA=slot0,pin0... INTD=slot3,pin0...
-	 */
-	int irq = (slot + pin-1) % 4 + BIGSUR_SH7751_PCI_IRQ_BASE;
-
-	PCIDBG(2, "PCI: Mapping Big Sur IRQ for slot %d, pin %c to irq %d\n",
-	       slot, pin-1+'A', irq);
-
-	return irq;
-}

arch/sh/drivers/pci/pci-sh7751.c

@@ -157,15 +157,6 @@ int __init sh7751_pcic_init(struct sh4_pci_address_map *map)
 		 PCIBIOS_MIN_IO, (64 << 10),
 		 SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO);
 
-	/*
-	 * XXX: For now, leave this board-specific. In the event we have other
-	 * boards that need to do similar work, this can be wrapped.
-	 */
-#ifdef CONFIG_SH_BIGSUR
-	bigsur_port_map(PCIBIOS_MIN_IO, (64 << 10),
-			SH7751_PCI_IO_BASE + PCIBIOS_MIN_IO, 0);
-#endif
-
 	/* Make sure the MSB's of IO window are set to access PCI space
 	 * correctly */
 	word = PCIBIOS_MIN_IO & SH4_PCIIOBR_MASK;

arch/sh/kernel/Makefile

@@ -6,7 +6,8 @@ extra-y	:= head.o init_task.o vmlinux.lds
 
 obj-y	:= process.o signal.o traps.o irq.o \
 	ptrace.o setup.o time.o sys_sh.o semaphore.o \
-	io.o io_generic.o sh_ksyms.o syscalls.o
+	io.o io_generic.o sh_ksyms.o syscalls.o \
+	debugtraps.o
 
 obj-y				+= cpu/ timers/
 obj-$(CONFIG_VSYSCALL)		+= vsyscall/

arch/sh/kernel/cpu/init.c

@@ -3,7 +3,7 @@
  *
  * CPU init code
  *
- * Copyright (C) 2002, 2003  Paul Mundt
+ * Copyright (C) 2002 - 2006  Paul Mundt
  * Copyright (C) 2003  Richard Curnow
  *
  * This file is subject to the terms and conditions of the GNU General Public
@@ -12,6 +12,8 @@
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/mm.h>
+#include <asm/mmu_context.h>
 #include <asm/processor.h>
 #include <asm/uaccess.h>
 #include <asm/page.h>
@@ -46,7 +48,7 @@ static void __init cache_init(void)
 {
 	unsigned long ccr, flags;
 
-	if (cpu_data->type == CPU_SH_NONE)
+	if (current_cpu_data.type == CPU_SH_NONE)
 		panic("Unknown CPU");
 
 	jump_to_P2();
@@ -66,7 +68,7 @@ static void __init cache_init(void)
 	if (ccr & CCR_CACHE_ENABLE) {
 		unsigned long ways, waysize, addrstart;
 
-		waysize = cpu_data->dcache.sets;
+		waysize = current_cpu_data.dcache.sets;
 
 #ifdef CCR_CACHE_ORA
 		/*
@@ -77,7 +79,7 @@ static void __init cache_init(void)
 			waysize >>= 1;
 #endif
 
-		waysize <<= cpu_data->dcache.entry_shift;
+		waysize <<= current_cpu_data.dcache.entry_shift;
 
 #ifdef CCR_CACHE_EMODE
 		/* If EMODE is not set, we only have 1 way to flush. */
@@ -85,7 +87,7 @@ static void __init cache_init(void)
 			ways = 1;
 		else
 #endif
-			ways = cpu_data->dcache.ways;
+			ways = current_cpu_data.dcache.ways;
 
 		addrstart = CACHE_OC_ADDRESS_ARRAY;
 		do {
@@ -93,10 +95,10 @@ static void __init cache_init(void)
 
 			for (addr = addrstart;
 			     addr < addrstart + waysize;
-			     addr += cpu_data->dcache.linesz)
+			     addr += current_cpu_data.dcache.linesz)
 				ctrl_outl(0, addr);
 
-			addrstart += cpu_data->dcache.way_incr;
+			addrstart += current_cpu_data.dcache.way_incr;
 		} while (--ways);
 	}
 
@@ -108,7 +110,7 @@ static void __init cache_init(void)
 
 #ifdef CCR_CACHE_EMODE
 	/* Force EMODE if possible */
-	if (cpu_data->dcache.ways > 1)
+	if (current_cpu_data.dcache.ways > 1)
 		flags |= CCR_CACHE_EMODE;
 	else
 		flags &= ~CCR_CACHE_EMODE;
@@ -125,10 +127,10 @@ static void __init cache_init(void)
 #ifdef CONFIG_SH_OCRAM
 	/* Turn on OCRAM -- halve the OC */
 	flags |= CCR_CACHE_ORA;
-	cpu_data->dcache.sets >>= 1;
+	current_cpu_data.dcache.sets >>= 1;
 
-	cpu_data->dcache.way_size = cpu_data->dcache.sets *
-				    cpu_data->dcache.linesz;
+	current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets *
+				    current_cpu_data.dcache.linesz;
 #endif
 
 	ctrl_outl(flags, CCR);
@@ -170,7 +172,7 @@ static void __init dsp_init(void)
 
 	/* If the DSP bit is still set, this CPU has a DSP */
 	if (sr & SR_DSP)
-		cpu_data->flags |= CPU_HAS_DSP;
+		current_cpu_data.flags |= CPU_HAS_DSP;
 
 	/* Now that we've determined the DSP status, clear the DSP bit. */
 	release_dsp();
@@ -202,22 +204,28 @@ asmlinkage void __init sh_cpu_init(void)
 	cache_init();
 
 	shm_align_mask = max_t(unsigned long,
-			       cpu_data->dcache.way_size - 1,
+			       current_cpu_data.dcache.way_size - 1,
 			       PAGE_SIZE - 1);
 
 	/* Disable the FPU */
 	if (fpu_disabled) {
 		printk("FPU Disabled\n");
-		cpu_data->flags &= ~CPU_HAS_FPU;
+		current_cpu_data.flags &= ~CPU_HAS_FPU;
 		disable_fpu();
 	}
 
 	/* FPU initialization */
-	if ((cpu_data->flags & CPU_HAS_FPU)) {
+	if ((current_cpu_data.flags & CPU_HAS_FPU)) {
 		clear_thread_flag(TIF_USEDFPU);
 		clear_used_math();
 	}
 
+	/*
+	 * Initialize the per-CPU ASID cache very early, since the
+	 * TLB flushing routines depend on this being setup.
+	 */
+	current_cpu_data.asid_cache = NO_CONTEXT;
+
 #ifdef CONFIG_SH_DSP
 	/* Probe for DSP */
 	dsp_init();
@@ -225,7 +233,7 @@ asmlinkage void __init sh_cpu_init(void)
 	/* Disable the DSP */
 	if (dsp_disabled) {
 		printk("DSP Disabled\n");
-		cpu_data->flags &= ~CPU_HAS_DSP;
+		current_cpu_data.flags &= ~CPU_HAS_DSP;
 		release_dsp();
 	}
 #endif
@@ -240,4 +248,3 @@ asmlinkage void __init sh_cpu_init(void)
 	ubc_wakeup();
 #endif
 }
-

arch/sh/kernel/cpu/irq/ipr.c

@@ -43,16 +43,29 @@ static struct irq_chip ipr_irq_chip = {
 	.mask_ack	= disable_ipr_irq,
 };
 
+unsigned int map_ipridx_to_addr(int idx) __attribute__ ((weak));
+unsigned int map_ipridx_to_addr(int idx)
+{
+	return 0;
+}
+
 void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs)
 {
 	int i;
 
 	for (i = 0; i < nr_irqs; i++) {
 		unsigned int irq = table[i].irq;
-		table[i].addr = map_ipridx_to_addr(table[i].ipr_idx);
+
+		if (!irq)
+			irq = table[i].irq = i;
+
 		/* could the IPR index be mapped, if not we ignore this */
-		if (table[i].addr == 0)
-			continue;
+		if (!table[i].addr) {
+			table[i].addr = map_ipridx_to_addr(table[i].ipr_idx);
+			if (!table[i].addr)
+				continue;
+		}
+
 		disable_irq_nosync(irq);
 		set_irq_chip_and_handler_name(irq, &ipr_irq_chip,
 				      handle_level_irq, "level");

arch/sh/kernel/cpu/sh2/entry.S

@@ -178,12 +178,10 @@ interrupt_entry:
 8:	.long	do_exception_error
 	
 trap_entry:
-	/* verbose BUG trapa entry check */
-	mov	#0x3e,r8
-	cmp/ge	r8,r9
-	bf/s	1f
-	 add	#-0x10,r9
-	add	#0x10,r9
+	mov	#0x30,r8
+	cmp/ge	r8,r9		! vector 0x20-0x2f is systemcall
+	bt	1f
+	add	#-0x10,r9	! convert SH2 to SH3/4 ABI
 1:	
 	shll2	r9			! TRA
 	mov	#OFF_TRA,r8
@@ -206,7 +204,7 @@ trap_entry:
 
 #if defined(CONFIG_SH_STANDARD_BIOS)
 	/* Unwind the stack and jmp to the debug entry */
-debug_kernel_fw:
+ENTRY(sh_bios_handler)
 	mov	r15,r0
 	add	#(22-4)*4-4,r0
 	ldc.l	@r0+,gbr

arch/sh/kernel/cpu/sh2/probe.c

@@ -18,27 +18,27 @@
 int __init detect_cpu_and_cache_system(void)
 {
 #if defined(CONFIG_CPU_SUBTYPE_SH7604)
-	cpu_data->type			= CPU_SH7604;
-	cpu_data->dcache.ways		= 4;
-	cpu_data->dcache.way_incr	= (1<<10);
-	cpu_data->dcache.sets		= 64;
-	cpu_data->dcache.entry_shift	= 4;
-	cpu_data->dcache.linesz		= L1_CACHE_BYTES;
-	cpu_data->dcache.flags		= 0;
+	current_cpu_data.type			= CPU_SH7604;
+	current_cpu_data.dcache.ways		= 4;
+	current_cpu_data.dcache.way_incr	= (1<<10);
+	current_cpu_data.dcache.sets		= 64;
+	current_cpu_data.dcache.entry_shift	= 4;
+	current_cpu_data.dcache.linesz		= L1_CACHE_BYTES;
+	current_cpu_data.dcache.flags		= 0;
 #elif defined(CONFIG_CPU_SUBTYPE_SH7619)
-	cpu_data->type			= CPU_SH7619;
-	cpu_data->dcache.ways		= 4;
-	cpu_data->dcache.way_incr	= (1<<12);
-	cpu_data->dcache.sets		= 256;
-	cpu_data->dcache.entry_shift	= 4;
-	cpu_data->dcache.linesz		= L1_CACHE_BYTES;
-	cpu_data->dcache.flags		= 0;
+	current_cpu_data.type			= CPU_SH7619;
+	current_cpu_data.dcache.ways		= 4;
+	current_cpu_data.dcache.way_incr	= (1<<12);
+	current_cpu_data.dcache.sets		= 256;
+	current_cpu_data.dcache.entry_shift	= 4;
+	current_cpu_data.dcache.linesz		= L1_CACHE_BYTES;
+	current_cpu_data.dcache.flags		= 0;
 #endif
 	/*
 	 * SH-2 doesn't have separate caches
 	 */
-	cpu_data->dcache.flags |= SH_CACHE_COMBINED;
-	cpu_data->icache = cpu_data->dcache;
+	current_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
+	current_cpu_data.icache = current_cpu_data.dcache;
 
 	return 0;
 }

arch/sh/kernel/cpu/sh2/setup-sh7619.c

@@ -52,42 +52,38 @@ static int __init sh7619_devices_setup(void)
 }
 __initcall(sh7619_devices_setup);
 
-#define INTC_IPRC      0xf8080000UL
-#define INTC_IPRD      0xf8080002UL
-
-#define CMI0_IRQ       86
-
-#define SCIF0_ERI_IRQ  88
-#define SCIF0_RXI_IRQ  89
-#define SCIF0_BRI_IRQ  90
-#define SCIF0_TXI_IRQ  91
-
-#define SCIF1_ERI_IRQ  92
-#define SCIF1_RXI_IRQ  93
-#define SCIF1_BRI_IRQ  94
-#define SCIF1_TXI_IRQ  95
-
-#define SCIF2_BRI_IRQ  96
-#define SCIF2_ERI_IRQ  97
-#define SCIF2_RXI_IRQ  98
-#define SCIF2_TXI_IRQ  99
-
 static struct ipr_data sh7619_ipr_map[] = {
-	{ CMI0_IRQ,      INTC_IPRC, 1, 2 },
-	{ SCIF0_ERI_IRQ, INTC_IPRD, 3, 3 },
-	{ SCIF0_RXI_IRQ, INTC_IPRD, 3, 3 },
-	{ SCIF0_BRI_IRQ, INTC_IPRD, 3, 3 },
-	{ SCIF0_TXI_IRQ, INTC_IPRD, 3, 3 },
-	{ SCIF1_ERI_IRQ, INTC_IPRD, 2, 3 },
-	{ SCIF1_RXI_IRQ, INTC_IPRD, 2, 3 },
-	{ SCIF1_BRI_IRQ, INTC_IPRD, 2, 3 },
-	{ SCIF1_TXI_IRQ, INTC_IPRD, 2, 3 },
-	{ SCIF2_ERI_IRQ, INTC_IPRD, 1, 3 },
-	{ SCIF2_RXI_IRQ, INTC_IPRD, 1, 3 },
-	{ SCIF2_BRI_IRQ, INTC_IPRD, 1, 3 },
-	{ SCIF2_TXI_IRQ, INTC_IPRD, 1, 3 },
+	{ 86, 0,  4, 2 },	/* CMI0 */
+	{ 88, 1, 12, 3 },	/* SCIF0_ERI */
+	{ 89, 1, 12, 3 },	/* SCIF0_RXI */
+	{ 90, 1, 12, 3 },	/* SCIF0_BRI */
+	{ 91, 1, 12, 3 },	/* SCIF0_TXI */
+	{ 92, 1,  8, 3 },	/* SCIF1_ERI */
+	{ 93, 1,  8, 3 },	/* SCIF1_RXI */
+	{ 94, 1,  8, 3 },	/* SCIF1_BRI */
+	{ 95, 1,  8, 3 },	/* SCIF1_TXI */
+	{ 96, 1,  4, 3 },	/* SCIF2_ERI */
+	{ 97, 1,  4, 3 },	/* SCIF2_RXI */
+	{ 98, 1,  4, 3 },	/* SCIF2_BRI */
+	{ 99, 1,  4, 3 },	/* SCIF2_TXI */
 };
 
+static unsigned int ipr_offsets[] = {
+	0xf8080000,	/* IPRC */
+	0xf8080002,	/* IPRD */
+	0xf8080004,	/* IPRE */
+	0xf8080006,	/* IPRF */
+	0xf8080008,	/* IPRG */
+};
+
+/* given the IPR index return the address of the IPR register */
+unsigned int map_ipridx_to_addr(int idx)
+{
+	if (unlikely(idx >= ARRAY_SIZE(ipr_offsets)))
+		return 0;
+	return ipr_offsets[idx];
+}
+
 void __init init_IRQ_ipr(void)
 {
 	make_ipr_irq(sh7619_ipr_map, ARRAY_SIZE(sh7619_ipr_map));

arch/sh/kernel/cpu/sh2a/probe.c

@@ -17,14 +17,14 @@
 int __init detect_cpu_and_cache_system(void)
 {
 	/* Just SH7206 for now .. */
-	cpu_data->type			= CPU_SH7206;
+	current_cpu_data.type			= CPU_SH7206;
 
-	cpu_data->dcache.ways		= 4;
-	cpu_data->dcache.way_incr	= (1 << 11);
-	cpu_data->dcache.sets		= 128;
-	cpu_data->dcache.entry_shift	= 4;
-	cpu_data->dcache.linesz		= L1_CACHE_BYTES;
-	cpu_data->dcache.flags		= 0;
+	current_cpu_data.dcache.ways		= 4;
+	current_cpu_data.dcache.way_incr	= (1 << 11);
+	current_cpu_data.dcache.sets		= 128;
+	current_cpu_data.dcache.entry_shift	= 4;
+	current_cpu_data.dcache.linesz		= L1_CACHE_BYTES;
+	current_cpu_data.dcache.flags		= 0;
 
 	/*
 	 * The icache is the same as the dcache as far as this setup is
@@ -32,7 +32,7 @@ int __init detect_cpu_and_cache_system(void)
 	 * lacks the U bit that the dcache has, none of this has any bearing
 	 * on the cache info.
 	 */
-	cpu_data->icache		= cpu_data->dcache;
+	current_cpu_data.icache		= current_cpu_data.dcache;
 
 	return 0;
 }

arch/sh/kernel/cpu/sh3/probe.c

@@ -50,41 +50,41 @@ int __init detect_cpu_and_cache_system(void)
 
 	back_to_P1();
 
-	cpu_data->dcache.ways		= 4;
-	cpu_data->dcache.entry_shift	= 4;
-	cpu_data->dcache.linesz		= L1_CACHE_BYTES;
-	cpu_data->dcache.flags		= 0;
+	current_cpu_data.dcache.ways		= 4;
+	current_cpu_data.dcache.entry_shift	= 4;
+	current_cpu_data.dcache.linesz		= L1_CACHE_BYTES;
+	current_cpu_data.dcache.flags		= 0;
 
 	/*
 	 * 7709A/7729 has 16K cache (256-entry), while 7702 has only
 	 * 2K(direct) 7702 is not supported (yet)
 	 */
 	if (data0 == data1 && data2 == data3) {	/* Shadow */
-		cpu_data->dcache.way_incr	= (1 << 11);
-		cpu_data->dcache.entry_mask	= 0x7f0;
-		cpu_data->dcache.sets		= 128;
-		cpu_data->type = CPU_SH7708;
+		current_cpu_data.dcache.way_incr	= (1 << 11);
+		current_cpu_data.dcache.entry_mask	= 0x7f0;
+		current_cpu_data.dcache.sets		= 128;
+		current_cpu_data.type = CPU_SH7708;
 
-		cpu_data->flags |= CPU_HAS_MMU_PAGE_ASSOC;
+		current_cpu_data.flags |= CPU_HAS_MMU_PAGE_ASSOC;
 	} else {				/* 7709A or 7729  */
-		cpu_data->dcache.way_incr	= (1 << 12);
-		cpu_data->dcache.entry_mask	= 0xff0;
-		cpu_data->dcache.sets		= 256;
-		cpu_data->type = CPU_SH7729;
+		current_cpu_data.dcache.way_incr	= (1 << 12);
+		current_cpu_data.dcache.entry_mask	= 0xff0;
+		current_cpu_data.dcache.sets		= 256;
+		current_cpu_data.type = CPU_SH7729;
 
 #if defined(CONFIG_CPU_SUBTYPE_SH7706)
-		cpu_data->type = CPU_SH7706;
+		current_cpu_data.type = CPU_SH7706;
 #endif
 #if defined(CONFIG_CPU_SUBTYPE_SH7710)
-		cpu_data->type = CPU_SH7710;
+		current_cpu_data.type = CPU_SH7710;
 #endif
 #if defined(CONFIG_CPU_SUBTYPE_SH7705)
-		cpu_data->type = CPU_SH7705;
+		current_cpu_data.type = CPU_SH7705;
 
 #if defined(CONFIG_SH7705_CACHE_32KB)
-		cpu_data->dcache.way_incr	= (1 << 13);
-		cpu_data->dcache.entry_mask	= 0x1ff0;
-		cpu_data->dcache.sets		= 512;
+		current_cpu_data.dcache.way_incr	= (1 << 13);
+		current_cpu_data.dcache.entry_mask	= 0x1ff0;
+		current_cpu_data.dcache.sets		= 512;
 		ctrl_outl(CCR_CACHE_32KB, CCR3);
 #else
 		ctrl_outl(CCR_CACHE_16KB, CCR3);
@@ -95,8 +95,8 @@ int __init detect_cpu_and_cache_system(void)
 	/*
 	 * SH-3 doesn't have separate caches
 	 */
-	cpu_data->dcache.flags |= SH_CACHE_COMBINED;
-	cpu_data->icache = cpu_data->dcache;
+	current_cpu_data.dcache.flags |= SH_CACHE_COMBINED;
+	current_cpu_data.icache = current_cpu_data.dcache;
 
 	return 0;
 }

arch/sh/kernel/sh_ksyms.c

@@ -105,7 +105,6 @@ EXPORT_SYMBOL(__flush_purge_region);
 EXPORT_SYMBOL(clear_user_page);
 #endif
 
-EXPORT_SYMBOL(flush_tlb_page);
 EXPORT_SYMBOL(__down_trylock);
 
 #ifdef CONFIG_SMP

include/asm-sh/Kbuild

 include include/asm-generic/Kbuild.asm
+
+header-y += cpu-features.h