Merge bk://24.221.152.185/linux-2.5-misc

into quango.ozlabs.ibm.com:/home/paulus/kernel/tart

arch/ppc/Config.help

@@ -340,9 +340,16 @@ CONFIG_PREP_RESIDUAL
   other useful pieces of information.  Sometimes this information is
   not present or incorrect.
 
-  Unless you expect to boot on a PReP system, there is not need to
+  Unless you expect to boot on a PReP system, there is no need to
   select Y.
 
+PReP residual data available in /proc/residual
+CONFIG_PROC_PREPRESIDUAL
+  Enabling this option will create a /proc/residual file which allows
+  you to get at the residual data on PReP systems.  You will need a tool
+  (lsresidual) to parse it.  If you aren't on a PReP system, you don't
+  want this.
+
 CONFIG_ADB
   Apple Desktop Bus (ADB) support is for support of devices which
   are connected to an ADB port.  ADB devices tend to have 4 pins.

arch/ppc/boot/common/misc-simple.c

@@ -67,7 +67,7 @@ extern int CRT_tstc(void);
 extern unsigned long serial_init(int chan, void *ignored);
 extern void serial_close(unsigned long com_port);
 extern void gunzip(void *, int, unsigned char *, int *);
-extern void setup_legacy(void);
+extern void serial_fixups(void);
 
 struct bi_record *
 decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
@@ -76,7 +76,7 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum)
 	char *cp, ch;
 	struct bi_record *rec, *birecs;
 
-	setup_legacy();
+	serial_fixups();
 	com_port = serial_init(0, NULL);
 
 	/* assume the chunk below 8M is free */

arch/ppc/boot/common/relocate.S

@@ -9,7 +9,7 @@
  *	   trini@mvista.com
  * Derived from arch/ppc/boot/prep/head.S (Cort Dougan, many others).
  *
- * Copyright 2001 MontaVista Software Inc.
+ * Copyright 2001-2002 MontaVista Software Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -188,10 +188,11 @@ start_ldr:
 	bl	decompress_kernel
 
 	/*
-	 * Make sure the kernel knows we don't have things set  in
+	 * Make sure the kernel knows we don't have things set in
 	 * registers.  -- Tom
 	 */
 	li	r4,0
+	li	r5,0
 	li	r6,0
 
 	/*

arch/ppc/boot/prep/misc.c

@@ -75,7 +75,7 @@ extern void gunzip(void *, int, unsigned char *, int *);
 
 extern void _put_MSR(unsigned int val);
 extern unsigned long serial_init(int chan, void *ignored);
-extern void setup_legacy(void);
+extern void serial_fixups(void);
 
 void
 writel(unsigned int val, unsigned int address)
@@ -134,7 +134,7 @@ decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum,
 	int start_multi = 0;
 	unsigned int pci_viddid, pci_did, tulip_pci_base, tulip_base;
 
-	setup_legacy();
+	serial_fixups();
 #if defined(CONFIG_SERIAL_CONSOLE)
 	com_port = serial_init(0, NULL);
 #endif /* CONFIG_SERIAL_CONSOLE */

arch/ppc/boot/simple/chrpmap.S

@@ -3,15 +3,15 @@
  *
  * Author: Tom Rini <trini@mvista.com>
  *
- * This will go and setup ISA_io to 0xFE00000.
+ * This will go and setup ISA_io to 0xFE00000 and return.
  */
 
 #include <asm/ppc_asm.h>
 
 	.text
 
-	.globl setup_legacy
-setup_legacy:
+	.globl serial_fixups
+serial_fixups:
 	lis	r3,ISA_io@h	/* Load ISA_io */
 	ori	r3,r3,ISA_io@l
 	lis	r4,0xFE00	/* Load the value, 0xFE00000 */

arch/ppc/boot/simple/direct.S

@@ -4,11 +4,12 @@
  * Author: Tom Rini <trini@mvista.com>
  *
  * This is an empty function for machines which use SERIAL_IO_MEM
- * and don't need ISA_io set to anything but 0;
+ * and don't need ISA_io set to anything but 0, or perform any other
+ * serial fixups.
  */
 
 	.text
 
-	.globl setup_legacy
-setup_legacy:
+	.globl serial_fixups
+serial_fixups:
 	blr

arch/ppc/boot/simple/legacy.S

@@ -3,15 +3,15 @@
  *
  * Author: Tom Rini <trini@mvista.com>
  *
- * This will go and setup ISA_io to 0x8000000.
+ * This will go and setup ISA_io to 0x8000000 and return.
  */
 
 #include <asm/ppc_asm.h>
 
 	.text
 
-	.globl setup_legacy
-setup_legacy:
+	.globl serial_fixups
+serial_fixups:
 	lis	r3,ISA_io@h	/* Load ISA_io */
 	ori	r3,r3,ISA_io@l
 	lis	r4,0x8000	/* Load the value, 0x8000000 */

arch/ppc/boot/simple/misc-embedded.c

@@ -54,7 +54,7 @@ char *bootrom_cmdline = "";
 char compiled_string[] = CONFIG_CMDLINE;
 #endif
 char ramroot_string[] = "root=/dev/ram";
-char netroot_string[] = "root=/dev/nfs rw ip=auto";
+char netroot_string[] = "root=/dev/nfs rw ip=on";
 
 /* Serial port to use. */
 unsigned long com_port;

arch/ppc/config.in

@@ -362,6 +362,7 @@ if [ "$CONFIG_ALL_PPC" = "y" ]; then
    bool 'Support for Open Firmware device tree in /proc' CONFIG_PROC_DEVICETREE
    bool 'Support for RTAS (RunTime Abstraction Services) in /proc' CONFIG_PPC_RTAS
    bool 'Support for PReP Residual Data' CONFIG_PREP_RESIDUAL
+   dep_bool '  Support for reading of PReP Residual Data in /proc' CONFIG_PROC_PREPRESIDUAL $CONFIG_PREP_RESIDUAL
 fi
 
 bool 'Default bootloader kernel arguments' CONFIG_CMDLINE_BOOL
@@ -574,15 +575,15 @@ if [ "$CONFIG_8260" = "y" ]; then
    source arch/ppc/8260_io/Config.in
 fi
 
-if [ "$CONFIG_4xx" = "y"]; then
+if [ "$CONFIG_4xx" = "y" ]; then
    mainmenu_option next_comment
    comment 'IBM 4xx options'
    if [ "$CONFIG_STB03xxx" = "y" ]; then
       bool 'STB IR Keyboard' CONFIG_STB_KB
       bool 'SICC Serial port' CONFIG_SERIAL_SICC
       if [ "$CONFIG_SERIAL_SICC" = "y" -a "$CONFIG_UART0_TTYS1" = "y" ]; then
-         define_bool CONFIG_UART1_DFLT_CONSOLE y	
-         define_bool CONFIG_SERIAL_SICC_CONSOLE y
+	 define_bool CONFIG_UART1_DFLT_CONSOLE y	
+	 define_bool CONFIG_SERIAL_SICC_CONSOLE y
       fi
    fi
    endmenu
@@ -621,8 +622,8 @@ if [ "$CONFIG_ALL_PPC" = "y" ]; then
 fi
 if [ "$CONFIG_4xx" = "y" -o "$CONFIG_GT64260" = "y"		\
      -o "$CONFIG_LOPEC" = "y" -o "$CONFIG_MCPN765" = "y"	\
-     -o "$CONFIG_PRPMC800" = "y" -o "$CONFIG_SANDPOINT" = "y"	\
-     -o "$CONFIG_ZX4500" = "y" ]; then
+     -o "$CONFIG_PPLUS" = "y" -o "$CONFIG_PRPMC800" = "y"	\
+     -o "$CONFIG_SANDPOINT" = "y" -o "$CONFIG_ZX4500" = "y" ]; then
    bool 'Support for early boot texts over serial port' CONFIG_SERIAL_TEXT_DEBUG
 fi
 endmenu

arch/ppc/kernel/Makefile

@@ -56,12 +56,11 @@ obj-$(CONFIG_PM)		+= ppc4xx_pm.o
 endif
 obj-$(CONFIG_8xx)		+= m8xx_setup.o ppc8xx_pic.o
 ifeq ($(CONFIG_8xx),y)
-obj-$(CONFIG_PCI)		+= qspan_pci.o
-ifndef CONFIG_MATH_EMULATION
+obj-$(CONFIG_PCI)		+= qspan_pci.o i8259.o
+ifneq ($(CONFIG_MATH_EMULATION),n)
 obj-y				+= softemu8xx.o
 endif
 endif
-obj-$(CONFIG_MBX)		+= i8259.o
 obj-$(CONFIG_ALL_PPC)		+= prom_init.o prom.o open_pic.o \
 					indirect_pci.o i8259.o
 obj-$(CONFIG_ADIR)		+= i8259.o indirect_pci.o pci_auto.o \

arch/ppc/platforms/lopec_pci.c

@@ -6,7 +6,7 @@
  * Author: Dan Cox
  *         danc@mvista.com (or, alternately, source@mvista.com)
  *
- * Copyright 2001 MontaVista Software Inc.
+ * Copyright 2001-2002 MontaVista Software Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -14,18 +14,11 @@
  * option) any later version.
  */
 
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/pci.h>
-#include <linux/slab.h>
 
 #include <asm/machdep.h>
-#include <asm/byteorder.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/uaccess.h>
 #include <asm/pci-bridge.h>
-#include <asm/open_pic.h>
 #include <asm/mpc10x.h>
 
 static inline int __init

arch/ppc/platforms/lopec_setup.c

@@ -15,34 +15,23 @@
  */
 
 #include <linux/config.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/pci.h>
-#include <linux/time.h>
 #include <linux/types.h>
-#include <linux/major.h>
-#include <linux/kdev_t.h>
+#include <linux/delay.h>
+#include <linux/pci_ids.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
 #include <linux/ide.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
+#include <linux/blk.h>
 #include <linux/console.h>
 
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/machdep.h>
-#include <asm/page.h>
-#include <asm/dma.h>
 #include <asm/io.h>
-#include <asm/time.h>
-#include <asm/delay.h>
-#include <asm/irq.h>
 #include <asm/open_pic.h>
 #include <asm/i8259.h>
-#include <asm/pci-bridge.h>
 #include <asm/todc.h>
 #include <asm/bootinfo.h>
 #include <asm/mpc10x.h>
+#include <asm/hw_irq.h>
 
 extern void lopec_find_bridges(void);
 
@@ -230,7 +219,7 @@ lopec_init_IRQ(void)
 	i8259_init(0xfef00000);
 }
 
-void __init
+static int __init
 lopec_request_io(void)
 {
 	outb(0x00, 0x4d0);
@@ -242,9 +231,11 @@ lopec_request_io(void)
 	request_region(0x80, 0x10, "dma page reg");
 	request_region(0xa0, 0x20, "pic2");
 	request_region(0xc0, 0x20, "dma2");
+	
+	return 0;
 }
 
-arch_initcall(lopec_request_io);
+device_initcall(lopec_request_io);
 
 static void __init
 lopec_map_io(void)

arch/ppc/platforms/mcpn765_setup.c

@@ -6,7 +6,7 @@
  * Author: Mark A. Greer
  *         mgreer@mvista.com
  *
- * Copyright 2001 MontaVista Software Inc.
+ * Copyright 2001-2002 MontaVista Software Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -31,7 +31,6 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/ide.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 
 #include <asm/system.h>
@@ -125,7 +124,7 @@ mcpn765_setup_arch(void)
 	OpenPIC_NumInitSenses = sizeof(mcpn765_openpic_initsenses);
 
 	printk("Motorola MCG MCPN765 cPCI Non-System Board\n");
-	printk("MCPN765 port (C) 2001 MontaVista Software, Inc. (source@mvista.com)\n");
+	printk("MCPN765 port (MontaVista Software, Inc. (source@mvista.com))\n");
 
 	if ( ppc_md.progress )
 		ppc_md.progress("mcpn765_setup_arch: exit", 0);

arch/ppc/platforms/pplus_setup.c

@@ -72,7 +72,6 @@
 #include <asm/todc.h>
 #include <asm/bootinfo.h>
 
-#undef CONFIG_SERIAL_TEXT_DEBUG
 #undef DUMP_DBATS
 
 TODC_ALLOC();
@@ -500,9 +499,7 @@ platform_init(unsigned long r3, unsigned long r4, unsigned long r5,
 
 #ifdef CONFIG_SERIAL_TEXT_DEBUG
 	ppc_md.progress = pplus_progress;
-#else /* !CONFIG_SERIAL_TEXT_DEBUG */
-	ppc_md.progress = NULL;
-#endif /* CONFIG_SERIAL_TEXT_DEBUG */
+#endif
 
 #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
 	ppc_ide_md.default_irq = pplus_ide_default_irq;

arch/ppc/platforms/prep_setup.c

@@ -117,9 +117,6 @@ prep_show_cpuinfo(struct seq_file *m)
 {
 	extern char *Motherboard_map_name;
 	int cachew;
-#ifdef CONFIG_PREP_RESIDUAL
-	int i;
-#endif
 
 	seq_printf(m, "machine\t\t: PReP %s\n", Motherboard_map_name);
 
@@ -180,6 +177,8 @@ prep_show_cpuinfo(struct seq_file *m)
 no_l2:
 #ifdef CONFIG_PREP_RESIDUAL
 	if (res->ResidualLength != 0) {
+		int i;
+
 		/* print info about SIMMs */
 		seq_printf(m, "simms\t\t: ");
 		for (i = 0; (res->ActualNumMemories) && (i < MAX_MEMS); i++) {
@@ -812,8 +811,8 @@ prep_map_io(void)
 	io_block_mapping(0xf0000000, PREP_ISA_MEM_BASE, 0x08000000, _PAGE_IO);
 }
 
-static void __init
-prep_init2(void)
+static int __init
+prep_request_io(void)
 {
 #ifdef CONFIG_NVRAM
 	request_region(PREP_NVRAM_AS0, 0x8, "nvram");
@@ -822,8 +821,12 @@ prep_init2(void)
 	request_region(0x40,0x20,"timer");
 	request_region(0x80,0x10,"dma page reg");
 	request_region(0xc0,0x20,"dma2");
+
+	return 0;
 }
 
+device_initcall(prep_request_io);
+
 void __init
 prep_init(unsigned long r3, unsigned long r4, unsigned long r5,
 		unsigned long r6, unsigned long r7)
@@ -863,7 +866,6 @@ prep_init(unsigned long r3, unsigned long r4, unsigned long r5,
 	ppc_md.init_IRQ       = prep_init_IRQ;
 	/* this gets changed later on if we have an OpenPIC -- Cort */
 	ppc_md.get_irq        = i8259_irq;
-	ppc_md.init           = prep_init2;
 
 	ppc_md.restart        = prep_restart;
 	ppc_md.power_off      = prep_power_off;

arch/ppc/platforms/residual.c

@@ -876,3 +876,38 @@ PnP_TAG_PACKET __init *PnP_find_large_vendor_packet(unsigned char *p,
 	};
 	return 0; /* not found */
 }
+
+#ifdef CONFIG_PROC_PREPRESIDUAL
+static int proc_prep_residual_read(char * buf, char ** start, off_t off,
+		int count, int *eof, void *data)
+{
+	int n;
+
+	n = res->ResidualLength - off;
+	if (n < 0) {
+		*eof = 1;
+		n = 0;
+	}
+	else {
+		if (n > count)
+			n = count;
+		else
+			*eof = 1;
+
+		memcpy(buf, (char *)res + off, n);
+		*start = buf;
+	}
+
+	return n;
+}
+
+void __init
+proc_prep_residual_init(void)
+{
+	if (res->ResidualLength)
+		create_proc_read_entry("residual", S_IRUGO, NULL,
+					proc_prep_residual_read, NULL);
+}
+
+__initcall(proc_prep_residual_init);
+#endif

arch/ppc/platforms/sandpoint_setup.c

@@ -6,7 +6,7 @@
  * Author: Mark A. Greer
  *         mgreer@mvista.com
  *
- * Copyright 2000, 2001 MontaVista Software Inc.
+ * Copyright 2000-2002 MontaVista Software Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -71,7 +71,6 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/ide.h>
-#include <linux/irq.h>
 #include <linux/seq_file.h>
 
 #include <asm/system.h>
@@ -180,7 +179,7 @@ sandpoint_setup_arch(void)
 #endif
 
 	printk("Motorola SPS Sandpoint Test Platform\n");
-	printk("Sandpoint port (C) 2000, 2001 MontaVista Software, Inc. (source@mvista.com)\n");
+	printk("Sandpoint port (MontaVista Software, Inc. (source@mvista.com))\n");
 
 	/* The Sandpoint rom doesn't enable any caches.  Do that now.
 	 * The 7450 portion will also set up the L3s once I get enough