Merge remote-tracking branch 'scott/next' into next

Freescale updates from Scott:

<<
Highlights include 32-bit booke relocatable support, e6500 hardware
tablewalk support, various e500 SPE fixes, some new/revived boards, and
e6500 deeper idle and altivec powerdown modes.
>>

Documentation/devicetree/bindings/video/ssd1289fb.txt

+* Solomon SSD1289 Framebuffer Driver
+
+Required properties:
+  - compatible: Should be "solomon,ssd1289fb". The only supported bus for
+    now is lbc.
+  - reg: Should contain address of the controller on the LBC bus. The detail
+    was described in Documentation/devicetree/bindings/powerpc/fsl/lbc.txt
+
+Examples:
+display@2,0 {
+	compatible = "solomon,ssd1289fb";
+	reg = <0x2 0x0000 0x0004>;
+};

arch/powerpc/Kconfig

@@ -402,8 +402,7 @@ config KEXEC
 config CRASH_DUMP
 	bool "Build a kdump crash kernel"
 	depends on PPC64 || 6xx || FSL_BOOKE || (44x && !SMP)
-	select RELOCATABLE if PPC64 || 44x
-	select DYNAMIC_MEMSTART if FSL_BOOKE
+	select RELOCATABLE if PPC64 || 44x || FSL_BOOKE
 	help
 	  Build a kernel suitable for use as a kdump capture kernel.
 	  The same kernel binary can be used as production kernel and dump
@@ -884,7 +883,7 @@ config DYNAMIC_MEMSTART
 
 config RELOCATABLE
 	bool "Build a relocatable kernel"
-	depends on ADVANCED_OPTIONS && FLATMEM && 44x
+	depends on ADVANCED_OPTIONS && FLATMEM && (44x || FSL_BOOKE)
 	select NONSTATIC_KERNEL
 	help
 	  This builds a kernel image that is capable of running at the

arch/powerpc/boot/Makefile

@@ -71,9 +71,9 @@ src-wlib-y := string.S crt0.S crtsavres.S stdio.c main.c \
 		uartlite.c mpc52xx-psc.c
 src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c
 src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c
-src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c
+src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c fsl-soc.c
 src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c
-src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c
+src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c
 
 src-plat-y := of.c epapr.c
 src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \
@@ -95,7 +95,7 @@ src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
 src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
 					cuboot-c2k.c gamecube-head.S \
 					gamecube.c wii-head.S wii.c holly.c \
-					prpmc2800.c
+					prpmc2800.c fixed-head.S mvme5100.c
 src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
 src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
 src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
@@ -286,6 +286,7 @@ image-$(CONFIG_MPC7448HPC2)		+= cuImage.mpc7448hpc2
 image-$(CONFIG_PPC_C2K)			+= cuImage.c2k
 image-$(CONFIG_GAMECUBE)		+= dtbImage.gamecube
 image-$(CONFIG_WII)			+= dtbImage.wii
+image-$(CONFIG_MVME5100)		+= dtbImage.mvme5100
 
 # Board port in arch/powerpc/platform/amigaone/Kconfig
 image-$(CONFIG_AMIGAONE)		+= cuImage.amigaone

arch/powerpc/boot/dts/fsl/elo3-dma-2.dtsi

+/*
+ * QorIQ Elo3 DMA device tree stub [ controller @ offset 0x102300 ]
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+dma2: dma@102300 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "fsl,elo3-dma";
+	reg = <0x102300 0x4>,
+	      <0x102600 0x4>;
+	ranges = <0x0 0x102100 0x500>;
+	dma-channel@0 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x0 0x80>;
+		interrupts = <464 2 0 0>;
+	};
+	dma-channel@80 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x80 0x80>;
+		interrupts = <465 2 0 0>;
+	};
+	dma-channel@100 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x100 0x80>;
+		interrupts = <466 2 0 0>;
+	};
+	dma-channel@180 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x180 0x80>;
+		interrupts = <467 2 0 0>;
+	};
+	dma-channel@300 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x300 0x80>;
+		interrupts = <468 2 0 0>;
+	};
+	dma-channel@380 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x380 0x80>;
+		interrupts = <469 2 0 0>;
+	};
+	dma-channel@400 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x400 0x80>;
+		interrupts = <470 2 0 0>;
+	};
+	dma-channel@480 {
+		compatible = "fsl,eloplus-dma-channel";
+		reg = <0x480 0x80>;
+		interrupts = <471 2 0 0>;
+	};
+};

arch/powerpc/boot/dts/fsl/p1020si-post.dtsi

@@ -36,7 +36,8 @@ &lbc {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	compatible = "fsl,p1020-elbc", "fsl,elbc", "simple-bus";
-	interrupts = <19 2 0 0>;
+	interrupts = <19 2 0 0>,
+		     <16 2 0 0>;
 };
 
 /* controller at 0x9000 */

arch/powerpc/boot/dts/fsl/p1021si-post.dtsi

@@ -36,7 +36,8 @@ &lbc {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	compatible = "fsl,p1021-elbc", "fsl,elbc", "simple-bus";
-	interrupts = <19 2 0 0>;
+	interrupts = <19 2 0 0>,
+		     <16 2 0 0>;
 };
 
 /* controller at 0x9000 */

arch/powerpc/boot/dts/fsl/p1022si-post.dtsi

@@ -40,7 +40,8 @@ &lbc {
 	 * pin muxing when the DIU is enabled.
 	 */
 	compatible = "fsl,p1022-elbc", "fsl,elbc";
-	interrupts = <19 2 0 0>;
+	interrupts = <19 2 0 0>,
+		     <16 2 0 0>;
 };
 
 /* controller at 0x9000 */

arch/powerpc/boot/dts/fsl/p1023si-post.dtsi

@@ -36,7 +36,8 @@ &lbc {
 	#address-cells = <2>;
 	#size-cells = <1>;
 	compatible = "fsl,p1023-elbc", "fsl,elbc", "simple-bus";
-	interrupts = <19 2 0 0>;
+	interrupts = <19 2 0 0>,
+		     <16 2 0 0>;
 };
 
 /* controller at 0xa000 */

arch/powerpc/boot/dts/mvme5100.dts

+/*
+ * Device Tree Source for Motorola/Emerson MVME5100.
+ *
+ * Copyright 2013 CSC Australia Pty. Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "MVME5100";
+	compatible = "MVME5100";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		serial0 = &serial0;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,7410 {
+			device_type = "cpu";
+			reg = <0x0>;
+			/* Following required by dtc but not used */
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <32768>;
+			d-cache-size = <32768>;
+			timebase-frequency = <25000000>;
+			clock-frequency = <500000000>;
+			bus-frequency = <100000000>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x20000000>;
+	};
+
+	hawk@fef80000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "hawk-bridge", "simple-bus";
+		ranges = <0x0 0xfef80000 0x10000>;
+		reg = <0xfef80000 0x10000>;
+
+		serial0: serial@8000 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x8000 0x80>;
+			reg-shift = <4>;
+			clock-frequency = <1843200>;
+			current-speed = <9600>;
+			interrupts = <1 1>; // IRQ1 Level Active Low.
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@8200 {
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x8200 0x80>;
+			reg-shift = <4>;
+			clock-frequency = <1843200>;
+			current-speed = <9600>;
+			interrupts = <1 1>; // IRQ1 Level Active Low.
+			interrupt-parent = <&mpic>;
+		};
+
+		mpic: interrupt-controller@f3f80000 {
+			#interrupt-cells = <2>;
+			#address-cells = <0>;
+			device_type = "open-pic";
+			compatible = "chrp,open-pic";
+			interrupt-controller;
+			reg = <0xf3f80000 0x40000>;
+		};
+	};
+
+	pci0: pci@feff0000 {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		compatible = "hawk-pci";
+		reg = <0xfec00000 0x400000>;
+		8259-interrupt-acknowledge = <0xfeff0030>;
+		ranges = <0x1000000 0x0        0x0 0xfe000000 0x0 0x800000
+			  0x2000000 0x0 0x80000000 0x80000000 0x0 0x74000000>;
+		bus-range = <0 255>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			/*
+			 * This definition (IDSEL 11) duplicates the
+			 * interrupts definition in the i8259
+			 * interrupt controller below.
+			 *
+			 * Do not change the interrupt sense/polarity from
+			 * 0x2 to anything else, doing so will cause endless
+			 * "spurious" i8259 interrupts to be fielded.
+			 */
+			// IDSEL 11 - iPMC712 PCI/ISA Bridge
+			0x5800 0x0 0x0 0x1 &mpic 0x0 0x2
+			0x5800 0x0 0x0 0x2 &mpic 0x0 0x2
+			0x5800 0x0 0x0 0x3 &mpic 0x0 0x2
+			0x5800 0x0 0x0 0x4 &mpic 0x0 0x2
+
+			/* IDSEL 12 - Not Used */
+
+			/* IDSEL 13 - Universe VME Bridge */
+			0x6800 0x0 0x0 0x1 &mpic 0x5 0x1
+			0x6800 0x0 0x0 0x2 &mpic 0x6 0x1
+			0x6800 0x0 0x0 0x3 &mpic 0x7 0x1
+			0x6800 0x0 0x0 0x4 &mpic 0x8 0x1
+
+			/* IDSEL 14 - ENET 1 */
+			0x7000 0x0 0x0 0x1 &mpic 0x2 0x1
+
+			/* IDSEL 15 - Not Used */
+
+			/* IDSEL 16 - PMC Slot 1 */
+			0x8000 0x0 0x0 0x1 &mpic 0x9 0x1
+			0x8000 0x0 0x0 0x2 &mpic 0xa 0x1
+			0x8000 0x0 0x0 0x3 &mpic 0xb 0x1
+			0x8000 0x0 0x0 0x4 &mpic 0xc 0x1
+
+			/* IDSEL 17 - PMC Slot 2 */
+			0x8800 0x0 0x0 0x1 &mpic 0xc 0x1
+			0x8800 0x0 0x0 0x2 &mpic 0x9 0x1
+			0x8800 0x0 0x0 0x3 &mpic 0xa 0x1
+			0x8800 0x0 0x0 0x4 &mpic 0xb 0x1
+
+			/* IDSEL 18 - Not Used */
+
+			/* IDSEL 19 - ENET 2 */
+			0x9800 0x0 0x0 0x1 &mpic 0xd 0x1
+
+			/* IDSEL 20 - PMCSPAN (PCI-X) */
+			0xa000 0x0 0x0 0x1 &mpic 0x9 0x1
+			0xa000 0x0 0x0 0x2 &mpic 0xa 0x1
+			0xa000 0x0 0x0 0x3 &mpic 0xb 0x1
+			0xa000 0x0 0x0 0x4 &mpic 0xc 0x1
+
+		>;
+
+		isa {
+			#address-cells = <2>;
+			#size-cells = <1>;
+			#interrupt-cells = <2>;
+			device_type = "isa";
+			compatible = "isa";
+			ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
+			interrupt-parent = <&i8259>;
+
+			i8259: interrupt-controller@20 {
+				#interrupt-cells = <2>;
+				#address-cells = <0>;
+				interrupts = <0 2>;
+				device_type = "interrupt-controller";
+				compatible = "chrp,iic";
+				interrupt-controller;
+				reg = <1 0x00000020 0x00000002
+                                       1 0x000000a0 0x00000002
+                                       1 0x000004d0 0x00000002>;
+				interrupt-parent = <&mpic>;
+			};
+
+		};
+
+	};
+
+	chosen {
+		linux,stdout-path = &serial0;
+        };
+
+};

arch/powerpc/boot/dts/p1010rdb.dts → arch/powerpc/boot/dts/p1010rdb-pa.dts

@@ -15,52 +15,9 @@ / {
 	model = "fsl,P1010RDB";
 	compatible = "fsl,P1010RDB";
 
-	memory {
-		device_type = "memory";
-	};
-
-	board_ifc: ifc: ifc@ffe1e000 {
-		/* NOR, NAND Flashes and CPLD on board */
-		ranges = <0x0 0x0 0x0 0xee000000 0x02000000
-			  0x1 0x0 0x0 0xff800000 0x00010000
-			  0x3 0x0 0x0 0xffb00000 0x00000020>;
-		reg = <0x0 0xffe1e000 0 0x2000>;
-	};
-
-	board_soc: soc: soc@ffe00000 {
-		ranges = <0x0 0x0 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@ffe09000 {
-		reg = <0 0xffe09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xa0000000
-				  0x2000000 0x0 0xa0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@ffe0a000 {
-		reg = <0 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0x80000000
-				  0x2000000 0x0 0x80000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
+	/include/ "p1010rdb_32b.dtsi"
 };
 
 /include/ "p1010rdb.dtsi"
+/include/ "p1010rdb-pa.dtsi"
 /include/ "fsl/p1010si-post.dtsi"

arch/powerpc/boot/dts/p1010rdb-pa.dtsi

+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&ifc_nand {
+	partition@0 {
+		/* This location must not be altered  */
+		/* 1MB for u-boot Bootloader Image */
+		reg = <0x0 0x00100000>;
+		label = "NAND U-Boot Image";
+		read-only;
+	};
+
+	partition@100000 {
+		/* 1MB for DTB Image */
+		reg = <0x00100000 0x00100000>;
+		label = "NAND DTB Image";
+	};
+
+	partition@200000 {
+		/* 4MB for Linux Kernel Image */
+		reg = <0x00200000 0x00400000>;
+		label = "NAND Linux Kernel Image";
+	};
+
+	partition@600000 {
+		/* 4MB for Compressed Root file System Image */
+		reg = <0x00600000 0x00400000>;
+		label = "NAND Compressed RFS Image";
+	};
+
+	partition@a00000 {
+		/* 15MB for JFFS2 based Root file System */
+		reg = <0x00a00000 0x00f00000>;
+		label = "NAND JFFS2 Root File System";
+	};
+
+	partition@1900000 {
+		/* 7MB for User Area */
+		reg = <0x01900000 0x00700000>;
+		label = "NAND User area";
+	};
+};
+
+&phy0 {
+	interrupts = <1 1 0 0>;
+};
+
+&phy1 {
+	interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+	interrupts = <4 1 0 0>;
+};

arch/powerpc/boot/dts/p1010rdb_36b.dts → arch/powerpc/boot/dts/p1010rdb-pa_36b.dts

@@ -38,52 +38,9 @@ / {
 	model = "fsl,P1010RDB";
 	compatible = "fsl,P1010RDB";
 
-	memory {
-		device_type = "memory";
-	};
-
-	board_ifc: ifc: ifc@fffe1e000 {
-		/* NOR, NAND Flashes and CPLD on board */
-		ranges = <0x0 0x0 0xf 0xee000000 0x02000000
-			  0x1 0x0 0xf 0xff800000 0x00010000
-			  0x3 0x0 0xf 0xffb00000 0x00000020>;
-		reg = <0xf 0xffe1e000 0 0x2000>;
-	};
-
-	board_soc: soc: soc@fffe00000 {
-		ranges = <0x0 0xf 0xffe00000 0x100000>;
-	};
-
-	pci0: pcie@fffe09000 {
-		reg = <0xf 0xffe09000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
-
-	pci1: pcie@fffe0a000 {
-		reg = <0xf 0xffe0a000 0 0x1000>;
-		ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
-			  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
-		pcie@0 {
-			ranges = <0x2000000 0x0 0xc0000000
-				  0x2000000 0x0 0xc0000000
-				  0x0 0x20000000
-
-				  0x1000000 0x0 0x0
-				  0x1000000 0x0 0x0
-				  0x0 0x100000>;
-		};
-	};
+	/include/ "p1010rdb_36b.dtsi"
 };
 
 /include/ "p1010rdb.dtsi"
+/include/ "p1010rdb-pa.dtsi"
 /include/ "fsl/p1010si-post.dtsi"

arch/powerpc/boot/dts/p1010rdb-pb.dts

+/*
+ * P1010 RDB Device Tree Source
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+	model = "fsl,P1010RDB-PB";
+	compatible = "fsl,P1010RDB-PB";
+
+	/include/ "p1010rdb_32b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+
+&phy0 {
+	interrupts = <0 1 0 0>;
+};
+
+&phy1 {
+	interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+	interrupts = <1 1 0 0>;
+};
+
+/include/ "fsl/p1010si-post.dtsi"

arch/powerpc/boot/dts/p1010rdb-pb_36b.dts

+/*
+ * P1010 RDB Device Tree Source (36-bit address map)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1010si-pre.dtsi"
+
+/ {
+	model = "fsl,P1010RDB-PB";
+	compatible = "fsl,P1010RDB-PB";
+
+	/include/ "p1010rdb_36b.dtsi"
+};
+
+/include/ "p1010rdb.dtsi"
+
+&phy0 {
+	interrupts = <0 1 0 0>;
+};
+
+&phy1 {
+	interrupts = <2 1 0 0>;
+};
+
+&phy2 {
+	interrupts = <1 1 0 0>;
+};
+
+/include/ "fsl/p1010si-post.dtsi"

arch/powerpc/boot/dts/p1010rdb.dtsi

@@ -69,49 +69,11 @@ partition@1f00000 {
 		};
 	};
 
-	nand@1,0 {
+	ifc_nand: nand@1,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "fsl,ifc-nand";
 		reg = <0x1 0x0 0x10000>;
-
-		partition@0 {
-			/* This location must not be altered  */
-			/* 1MB for u-boot Bootloader Image */
-			reg = <0x0 0x00100000>;
-			label = "NAND U-Boot Image";
-			read-only;
-		};
-
-		partition@100000 {
-			/* 1MB for DTB Image */
-			reg = <0x00100000 0x00100000>;
-			label = "NAND DTB Image";
-		};
-
-		partition@200000 {
-			/* 4MB for Linux Kernel Image */
-			reg = <0x00200000 0x00400000>;
-			label = "NAND Linux Kernel Image";
-		};
-
-		partition@600000 {
-			/* 4MB for Compressed Root file System Image */
-			reg = <0x00600000 0x00400000>;
-			label = "NAND Compressed RFS Image";
-		};
-
-		partition@a00000 {
-			/* 15MB for JFFS2 based Root file System */
-			reg = <0x00a00000 0x00f00000>;
-			label = "NAND JFFS2 Root File System";
-		};
-
-		partition@1900000 {
-			/* 7MB for User Area */
-			reg = <0x01900000 0x00700000>;
-			label = "NAND User area";
-		};
 	};
 
 	cpld@3,0 {
@@ -193,17 +155,14 @@ usb@22000 {
 
 	mdio@24000 {
 		phy0: ethernet-phy@0 {
-			interrupts = <3 1 0 0>;
 			reg = <0x1>;
 		};
 
 		phy1: ethernet-phy@1 {
-			interrupts = <2 1 0 0>;
 			reg = <0x0>;
 		};
 
 		phy2: ethernet-phy@2 {
-			interrupts = <2 1 0 0>;
 			reg = <0x2>;
 		};
 

arch/powerpc/boot/dts/p1010rdb_32b.dtsi

+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+memory {
+	device_type = "memory";
+};
+
+board_ifc: ifc: ifc@ffe1e000 {
+	/* NOR, NAND Flashes and CPLD on board */
+	ranges = <0x0 0x0 0x0 0xee000000 0x02000000
+		  0x1 0x0 0x0 0xff800000 0x00010000
+		  0x3 0x0 0x0 0xffb00000 0x00000020>;
+	reg = <0x0 0xffe1e000 0 0x2000>;
+};
+
+board_soc: soc: soc@ffe00000 {
+	ranges = <0x0 0x0 0xffe00000 0x100000>;
+};
+
+pci0: pcie@ffe09000 {
+	reg = <0 0xffe09000 0 0x1000>;
+	ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+		  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+	pcie@0 {
+		ranges = <0x2000000 0x0 0xa0000000
+			  0x2000000 0x0 0xa0000000
+			  0x0 0x20000000
+
+			  0x1000000 0x0 0x0
+			  0x1000000 0x0 0x0
+			  0x0 0x100000>;
+	};
+};
+
+pci1: pcie@ffe0a000 {
+	reg = <0 0xffe0a000 0 0x1000>;
+	ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+		  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+	pcie@0 {
+		ranges = <0x2000000 0x0 0x80000000
+			  0x2000000 0x0 0x80000000
+			  0x0 0x20000000
+
+			  0x1000000 0x0 0x0
+			  0x1000000 0x0 0x0
+			  0x0 0x100000>;
+	};
+};

arch/powerpc/boot/dts/p1010rdb_36b.dtsi

+/*
+ * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+memory {
+	device_type = "memory";
+};
+
+board_ifc: ifc: ifc@fffe1e000 {
+	/* NOR, NAND Flashes and CPLD on board */
+	ranges = <0x0 0x0 0xf 0xee000000 0x02000000
+		  0x1 0x0 0xf 0xff800000 0x00010000
+		  0x3 0x0 0xf 0xffb00000 0x00000020>;
+	reg = <0xf 0xffe1e000 0 0x2000>;
+};
+
+board_soc: soc: soc@fffe00000 {
+	ranges = <0x0 0xf 0xffe00000 0x100000>;
+};
+
+pci0: pcie@fffe09000 {
+	reg = <0xf 0xffe09000 0 0x1000>;
+	ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+		  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+	pcie@0 {
+		ranges = <0x2000000 0x0 0xc0000000
+			  0x2000000 0x0 0xc0000000
+			  0x0 0x20000000
+
+			  0x1000000 0x0 0x0
+			  0x1000000 0x0 0x0
+			  0x0 0x100000>;
+	};
+};
+
+pci1: pcie@fffe0a000 {
+	reg = <0xf 0xffe0a000 0 0x1000>;
+	ranges = <0x2000000 0x0 0xc0000000 0xc 0x20000000 0x0 0x20000000
+		  0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x10000>;
+	pcie@0 {
+		ranges = <0x2000000 0x0 0xc0000000
+			  0x2000000 0x0 0xc0000000
+			  0x0 0x20000000
+
+			  0x1000000 0x0 0x0
+			  0x1000000 0x0 0x0
+			  0x0 0x100000>;
+	};
+};

arch/powerpc/boot/dts/p1022ds.dtsi

@@ -146,8 +146,9 @@ wm8776:codec@1a {
 			 */
 		};
 		rtc@68 {
-			compatible = "dallas,ds1339";
+			compatible = "dallas,ds3232";
 			reg = <0x68>;
+			interrupts = <0x1 0x1 0 0>;
 		};
 		adt7461@4c {
 			compatible = "adi,adt7461";

arch/powerpc/boot/dts/p1025twr.dts

+/*
+ * P1025 TWR Device Tree Source (32-bit address map)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/p1021si-pre.dtsi"
+/ {
+	model = "fsl,P1025";
+	compatible = "fsl,TWR-P1025";
+
+	memory {
+		device_type = "memory";
+	};
+
+	lbc: localbus@ffe05000 {
+		reg = <0 0xffe05000 0 0x1000>;
+
+		/* NOR Flash and SSD1289 */
+		ranges = <0x0 0x0 0x0 0xec000000 0x04000000
+			  0x2 0x0 0x0 0xe0000000 0x00020000>;
+	};
+
+	soc: soc@ffe00000 {
+		ranges = <0x0 0x0 0xffe00000 0x100000>;
+	};
+
+	pci0: pcie@ffe09000 {
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		reg = <0 0xffe09000 0 0x1000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	pci1: pcie@ffe0a000 {
+		reg = <0 0xffe0a000 0 0x1000>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		pcie@0 {
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x100000>;
+		};
+	};
+
+	qe: qe@ffe80000 {
+		ranges = <0x0 0x0 0xffe80000 0x40000>;
+		reg = <0 0xffe80000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+	};
+};
+
+/include/ "p1025twr.dtsi"
+/include/ "fsl/p1021si-post.dtsi"

arch/powerpc/boot/dts/p1025twr.dtsi

+/*
+ * P1025 TWR Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2013 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in the
+ *       documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *       names of its contributors may be used to endorse or promote products
+ *       derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/{
+       aliases {
+		ethernet3 = &enet3;
+		ethernet4 = &enet4;
+       };
+};
+
+&lbc {
+	nor@0,0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "cfi-flash";
+		reg = <0x0 0x0 0x4000000>;
+		bank-width = <2>;
+		device-width = <1>;
+
+		partition@0 {
+			/* This location must not be altered  */
+			/* 256KB for Vitesse 7385 Switch firmware */
+			reg = <0x0 0x00040000>;
+			label = "NOR Vitesse-7385 Firmware";
+			read-only;
+		};
+
+		partition@40000 {
+			/* 256KB for DTB Image */
+			reg = <0x00040000 0x00040000>;
+			label = "NOR DTB Image";
+		};
+
+		partition@80000 {
+			/* 5.5 MB for Linux Kernel Image */
+			reg = <0x00080000 0x00580000>;
+			label = "NOR Linux Kernel Image";
+		};
+
+		partition@400000 {
+			/* 56.75MB for Root file System */
+			reg = <0x00600000 0x038c0000>;
+			label = "NOR Root File System";
+		};
+
+		partition@ec0000 {
+			/* This location must not be altered  */
+			/* 256KB for QE ucode firmware*/
+			reg = <0x03ec0000 0x00040000>;
+			label = "NOR QE microcode firmware";
+			read-only;
+		};
+
+		partition@f00000 {
+			/* This location must not be altered  */
+			/* 512KB for u-boot Bootloader Image */
+			/* 512KB for u-boot Environment Variables */
+			reg = <0x03f00000 0x00100000>;
+			label = "NOR U-Boot Image";
+			read-only;
+		};
+	};
+
+	/* CS2 for Display */
+	display@2,0 {
+		compatible = "solomon,ssd1289fb";
+		reg = <0x2 0x0000 0x0004>;
+	};
+
+};
+
+&soc {
+	usb@22000 {
+		phy_type = "ulpi";
+	};
+
+	mdio@24000 {
+		phy0: ethernet-phy@2 {
+			interrupt-parent = <&mpic>;
+			interrupts = <1 1 0 0>;
+			reg = <0x2>;
+		};
+
+		phy1: ethernet-phy@1 {
+			interrupt-parent = <&mpic>;
+			interrupts = <2 1 0 0>;
+			reg = <0x1>;
+		};
+
+		tbi0: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@25000 {
+		tbi1: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	mdio@26000 {
+		tbi2: tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet0: ethernet@b0000 {
+		phy-handle = <&phy0>;
+		phy-connection-type = "rgmii-id";
+
+	};
+
+	enet1: ethernet@b1000 {
+		status = "disabled";
+	};
+
+	enet2: ethernet@b2000 {
+		phy-handle = <&phy1>;
+		phy-connection-type = "rgmii-id";
+	};
+
+	par_io@e0100 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0xe0100 0x60>;
+		ranges = <0x0 0xe0100 0x60>;
+		device_type = "par_io";
+		num-ports = <3>;
+		pio1: ucc_pin@01 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+				0x0  0x17 0x2  0x0  0x2  0x0    /* CLK12 */
+				0x0  0x18 0x2  0x0  0x1  0x0    /* CLK9 */
+				0x0  0x7  0x1  0x0  0x2  0x0    /* ENET1_TXD0_SER1_TXD0 */
+				0x0  0x9  0x1  0x0  0x2  0x0    /* ENET1_TXD1_SER1_TXD1 */
+				0x0  0xb  0x1  0x0  0x2  0x0    /* ENET1_TXD2_SER1_TXD2 */
+				0x0  0xc  0x1  0x0  0x2  0x0    /* ENET1_TXD3_SER1_TXD3 */
+				0x0  0x6  0x2  0x0  0x2  0x0    /* ENET1_RXD0_SER1_RXD0 */
+				0x0  0xa  0x2  0x0  0x2  0x0    /* ENET1_RXD1_SER1_RXD1 */
+				0x0  0xe  0x2  0x0  0x2  0x0    /* ENET1_RXD2_SER1_RXD2 */
+				0x0  0xf  0x2  0x0  0x2  0x0    /* ENET1_RXD3_SER1_RXD3 */
+				0x0  0x5  0x1  0x0  0x2  0x0    /* ENET1_TX_EN_SER1_RTS_B */
+				0x0  0xd  0x1  0x0  0x2  0x0    /* ENET1_TX_ER */
+				0x0  0x4  0x2  0x0  0x2  0x0    /* ENET1_RX_DV_SER1_CTS_B */
+				0x0  0x8  0x2  0x0  0x2  0x0    /* ENET1_RX_ER_SER1_CD_B */
+				0x0  0x11 0x2  0x0  0x2  0x0    /* ENET1_CRS */
+				0x0  0x10 0x2  0x0  0x2  0x0>;    /* ENET1_COL */
+		};
+
+		pio2: ucc_pin@02 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x13 0x1  0x0  0x1  0x0    /* QE_MUX_MDC */
+				0x1  0x14 0x3  0x0  0x1  0x0    /* QE_MUX_MDIO */
+				0x1  0xb  0x2  0x0  0x1  0x0    /* CLK13 */
+				0x1  0x7  0x1  0x0  0x2  0x0    /* ENET5_TXD0_SER5_TXD0 */
+				0x1  0xa  0x1  0x0  0x2  0x0    /* ENET5_TXD1_SER5_TXD1 */
+				0x1  0x6  0x2  0x0  0x2  0x0    /* ENET5_RXD0_SER5_RXD0 */
+				0x1  0x9  0x2  0x0  0x2  0x0    /* ENET5_RXD1_SER5_RXD1 */
+				0x1  0x5  0x1  0x0  0x2  0x0    /* ENET5_TX_EN_SER5_RTS_B */
+				0x1  0x4  0x2  0x0  0x2  0x0    /* ENET5_RX_DV_SER5_CTS_B */
+				0x1  0x8  0x2  0x0  0x2  0x0>;    /* ENET5_RX_ER_SER5_CD_B */
+		};
+
+		pio3: ucc_pin@03 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x0  0x16 0x2  0x0  0x2  0x0    /* SER7_CD_B*/
+				0x0  0x12 0x2  0x0  0x2  0x0    /* SER7_CTS_B*/
+				0x0  0x13 0x1  0x0  0x2  0x0    /* SER7_RTS_B*/
+				0x0  0x14 0x2  0x0  0x2  0x0    /* SER7_RXD0*/
+				0x0  0x15 0x1  0x0  0x2  0x0>;    /* SER7_TXD0*/
+		};
+
+		pio4: ucc_pin@04 {
+			pio-map = <
+		/* port  pin  dir  open_drain  assignment  has_irq */
+				0x1  0x0  0x2  0x0  0x2  0x0    /* SER3_CD_B*/
+				0x0  0x1c 0x2  0x0  0x2  0x0    /* SER3_CTS_B*/
+				0x0  0x1d 0x1  0x0  0x2  0x0    /* SER3_RTS_B*/
+				0x0  0x1e 0x2  0x0  0x2  0x0    /* SER3_RXD0*/
+				0x0  0x1f 0x1  0x0  0x2  0x0>;    /* SER3_TXD0*/
+		};
+	};
+};
+
+&qe {
+	enet3: ucc@2000 {
+		device_type = "network";
+		compatible = "ucc_geth";
+		rx-clock-name = "clk12";
+		tx-clock-name = "clk9";
+		pio-handle = <&pio1>;
+		phy-handle = <&qe_phy0>;
+		phy-connection-type = "mii";
+	};
+
+	mdio@2120 {
+		qe_phy0: ethernet-phy@18 {
+			interrupt-parent = <&mpic>;
+			interrupts = <4 1 0 0>;
+			reg = <0x18>;
+			device_type = "ethernet-phy";
+		};
+		qe_phy1: ethernet-phy@19 {
+			interrupt-parent = <&mpic>;
+			interrupts = <5 1 0 0>;
+			reg = <0x19>;
+			device_type = "ethernet-phy";
+		};
+		tbi-phy@11 {
+			reg = <0x11>;
+			device_type = "tbi-phy";
+		};
+	};
+
+	enet4: ucc@2400 {
+		device_type = "network";
+		compatible = "ucc_geth";
+		rx-clock-name = "none";
+		tx-clock-name = "clk13";
+		pio-handle = <&pio2>;
+		phy-handle = <&qe_phy1>;
+		phy-connection-type = "rmii";
+	};
+
+	serial2: ucc@2600 {
+		device_type = "serial";
+		compatible = "ucc_uart";
+		port-number = <0>;
+		rx-clock-name = "brg6";
+		tx-clock-name = "brg6";
+		pio-handle = <&pio3>;
+	};
+
+	serial3: ucc@2200 {
+		device_type = "serial";
+		compatible = "ucc_uart";
+		port-number = <1>;
+		rx-clock-name = "brg2";
+		tx-clock-name = "brg2";
+		pio-handle = <&pio4>;
+	};
+};

arch/powerpc/boot/mvme5100.c

+/*
+ * Motorola/Emerson MVME5100 with PPCBug firmware.
+ *
+ * Author: Stephen Chivers <schivers@csc.com>
+ *
+ * Copyright 2013 CSC Australia Pty. Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+#include "types.h"
+#include "ops.h"
+#include "io.h"
+
+BSS_STACK(4096);
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5)
+{
+	u32			heapsize;
+
+	heapsize = 0x8000000 - (u32)_end; /* 128M */
+	simple_alloc_init(_end, heapsize, 32, 64);
+	fdt_init(_dtb_start);
+	serial_console_init();
+}

arch/powerpc/boot/wrapper

@@ -265,6 +265,10 @@ epapr)
     link_address='0x20000000'
     pie=-pie
     ;;
+mvme5100)
+    platformo="$object/fixed-head.o $object/mvme5100.o"
+    binary=y
+    ;;
 esac
 
 vmz="$tmpdir/`basename \"$kernel\"`.$ext"

arch/powerpc/configs/85xx/p1023_defconfig

-CONFIG_PPC_85xx=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_RCU_FANOUT=32
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_PHYSICAL_START=0x00000000
-CONFIG_P1023_RDB=y
-CONFIG_P1023_RDS=y
-CONFIG_QUICC_ENGINE=y
-CONFIG_QE_GPIO=y
-CONFIG_CPM2=y
-CONFIG_HIGHMEM=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_BINFMT_MISC=m
-CONFIG_MATH_EMULATION=y
-CONFIG_SWIOTLB=y
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-# CONFIG_PCIEAER is not set
-# CONFIG_PCIEASPM is not set
-CONFIG_PCI_MSI=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_ARPD=y
-CONFIG_INET_ESP=y
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
-CONFIG_IP_SCTP=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=131072
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_LEGACY=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_ATA=y
-CONFIG_SATA_FSL=y
-CONFIG_SATA_SIL24=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_FS_ENET=y
-CONFIG_FSL_PQ_MDIO=y
-CONFIG_E1000E=y
-CONFIG_PHYLIB=y
-CONFIG_AT803X_PHY=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_FIXED_PHY=y
-CONFIG_INPUT_FF_MEMLESS=m
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO_LIBPS2=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-CONFIG_NVRAM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_CPM=m
-CONFIG_I2C_MPC=y
-CONFIG_GPIO_MPC8XXX=y
-# CONFIG_HWMON is not set
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_STORAGE=y
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_DMADEVICES=y
-CONFIG_FSL_DMA=y
-# CONFIG_NET_DMA is not set
-CONFIG_STAGING=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_ADFS_FS=m
-CONFIG_AFFS_FS=m
-CONFIG_HFS_FS=m
-CONFIG_HFSPLUS_FS=m
-CONFIG_BEFS_FS=m
-CONFIG_BFS_FS=m
-CONFIG_EFS_FS=m
-CONFIG_CRAMFS=y
-CONFIG_VXFS_FS=m
-CONFIG_HPFS_FS=m
-CONFIG_QNX4FS_FS=m
-CONFIG_SYSV_FS=m
-CONFIG_UFS_FS=m
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
-CONFIG_CRC_T10DIF=y
-CONFIG_FRAME_WARN=8092
-CONFIG_DEBUG_FS=y
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-CONFIG_STRICT_DEVMEM=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_AES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_FSL_CAAM=y

arch/powerpc/configs/adder875_defconfig

@@ -70,3 +70,4 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_CRC32_SLICEBY4=y

arch/powerpc/configs/ep88xc_defconfig

@@ -72,3 +72,4 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_CRC32_SLICEBY4=y

arch/powerpc/configs/mpc85xx_defconfig

@@ -31,6 +31,7 @@ CONFIG_C293_PCIE=y
 CONFIG_P1010_RDB=y
 CONFIG_P1022_DS=y
 CONFIG_P1022_RDK=y
+CONFIG_P1023_RDB=y
 CONFIG_P1023_RDS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
@@ -113,6 +114,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -211,6 +213,7 @@ CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1307=y
 CONFIG_DMADEVICES=y
 CONFIG_FSL_DMA=y
 # CONFIG_NET_DMA is not set

arch/powerpc/configs/mpc85xx_smp_defconfig

@@ -34,6 +34,7 @@ CONFIG_C293_PCIE=y
 CONFIG_P1010_RDB=y
 CONFIG_P1022_DS=y
 CONFIG_P1022_RDK=y
+CONFIG_P1023_RDB=y
 CONFIG_P1023_RDS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
@@ -116,6 +117,7 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=131072
+CONFIG_EEPROM_AT24=y
 CONFIG_EEPROM_LEGACY=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
@@ -212,6 +214,7 @@ CONFIG_EDAC=y
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_CMOS=y
+CONFIG_RTC_DRV_DS1307=y
 CONFIG_DMADEVICES=y
 CONFIG_FSL_DMA=y
 # CONFIG_NET_DMA is not set

arch/powerpc/configs/mpc866_ads_defconfig

@@ -55,3 +55,4 @@ CONFIG_PARTITION_ADVANCED=y
 CONFIG_CRC_CCITT=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC32_SLICEBY4=y

arch/powerpc/configs/mpc885_ads_defconfig

@@ -78,3 +78,4 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_CRC32_SLICEBY4=y

arch/powerpc/configs/mvme5100_defconfig

+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
+CONFIG_EMBEDDED6xx=y
+CONFIG_MVME5100=y
+CONFIG_KVM_GUEST=y
+CONFIG_HZ_100=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPACTION is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,9600 ip=dhcp root=/dev/nfs"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_LAPB=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_EEPROM_LEGACY=m
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_E100=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=10
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MPC=y
+# CONFIG_HWMON is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_VME_BUS=m
+CONFIG_VME_CA91CX42=m
+CONFIG_EXT2_FS=m
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_XFS_FS=m
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_CIFS=m
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_UTF8=m
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_T10DIF=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=20
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set

arch/powerpc/configs/tqm8xx_defconfig

@@ -84,3 +84,4 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_HUNG_TASK=y
 CONFIG_DEBUG_INFO=y
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_CRC32_SLICEBY4=y

arch/powerpc/include/asm/fsl_lbc.h

@@ -285,7 +285,7 @@ struct fsl_lbc_ctrl {
 	/* device info */
 	struct device			*dev;
 	struct fsl_lbc_regs __iomem	*regs;
-	int				irq;
+	int				irq[2];
 	wait_queue_head_t		irq_wait;
 	spinlock_t			lock;
 	void				*nand;

arch/powerpc/include/asm/kvm_asm.h

@@ -74,6 +74,7 @@
 #define BOOKE_INTERRUPT_GUEST_DBELL_CRIT 39
 #define BOOKE_INTERRUPT_HV_SYSCALL 40
 #define BOOKE_INTERRUPT_HV_PRIV 41
+#define BOOKE_INTERRUPT_LRAT_ERROR 42
 
 /* book3s */
 

arch/powerpc/include/asm/mmu-book3e.h

@@ -286,8 +286,21 @@ static inline unsigned int mmu_psize_to_shift(unsigned int mmu_psize)
 extern int mmu_linear_psize;
 extern int mmu_vmemmap_psize;
 
+struct tlb_core_data {
+	/* For software way selection, as on Freescale TLB1 */
+	u8 esel_next, esel_max, esel_first;
+
+	/* Per-core spinlock for e6500 TLB handlers (no tlbsrx.) */
+	u8 lock;
+};
+
 #ifdef CONFIG_PPC64
 extern unsigned long linear_map_top;
+extern int book3e_htw_mode;
+
+#define PPC_HTW_NONE	0
+#define PPC_HTW_IBM	1
+#define PPC_HTW_E6500	2
 
 /*
  * 64-bit booke platforms don't load the tlb in the tlb miss handler code.

arch/powerpc/include/asm/mmu.h

@@ -180,16 +180,17 @@ static inline void assert_pte_locked(struct mm_struct *mm, unsigned long addr)
 #define MMU_PAGE_64K_AP	3	/* "Admixed pages" (hash64 only) */
 #define MMU_PAGE_256K	4
 #define MMU_PAGE_1M	5
-#define MMU_PAGE_4M	6
-#define MMU_PAGE_8M	7
-#define MMU_PAGE_16M	8
-#define MMU_PAGE_64M	9
-#define MMU_PAGE_256M	10
-#define MMU_PAGE_1G	11
-#define MMU_PAGE_16G	12
-#define MMU_PAGE_64G	13
-
-#define MMU_PAGE_COUNT	14
+#define MMU_PAGE_2M	6
+#define MMU_PAGE_4M	7
+#define MMU_PAGE_8M	8
+#define MMU_PAGE_16M	9
+#define MMU_PAGE_64M	10
+#define MMU_PAGE_256M	11
+#define MMU_PAGE_1G	12
+#define MMU_PAGE_16G	13
+#define MMU_PAGE_64G	14
+
+#define MMU_PAGE_COUNT	15
 
 #if defined(CONFIG_PPC_STD_MMU_64)
 /* 64-bit classic hash table MMU */

arch/powerpc/include/asm/paca.h

@@ -112,6 +112,10 @@ struct paca_struct {
 	/* Keep pgd in the same cacheline as the start of extlb */
 	pgd_t *pgd __attribute__((aligned(0x80))); /* Current PGD */
 	pgd_t *kernel_pgd;		/* Kernel PGD */
+
+	/* Shared by all threads of a core -- points to tcd of first thread */
+	struct tlb_core_data *tcd_ptr;
+
 	/* We can have up to 3 levels of reentrancy in the TLB miss handler */
 	u64 extlb[3][EX_TLB_SIZE / sizeof(u64)];
 	u64 exmc[8];		/* used for machine checks */
@@ -122,6 +126,8 @@ struct paca_struct {
 	void *mc_kstack;
 	void *crit_kstack;
 	void *dbg_kstack;
+
+	struct tlb_core_data tcd;
 #endif /* CONFIG_PPC_BOOK3E */
 
 	mm_context_t context;

arch/powerpc/include/asm/ppc_asm.h

@@ -294,6 +294,11 @@ GLUE(.,name):
  *   you want to access various offsets within it).  On ppc32 this is
  *   identical to LOAD_REG_IMMEDIATE.
  *
+ * LOAD_REG_ADDR_PIC(rn, name)
+ *   Loads the address of label 'name' into register 'run'. Use this when
+ *   the kernel doesn't run at the linked or relocated address. Please
+ *   note that this macro will clobber the lr register.
+ *
  * LOAD_REG_ADDRBASE(rn, name)
  * ADDROFF(name)
  *   LOAD_REG_ADDRBASE loads part of the address of label 'name' into
@@ -304,6 +309,14 @@ GLUE(.,name):
  *      LOAD_REG_ADDRBASE(rX, name)
  *      ld	rY,ADDROFF(name)(rX)
  */
+
+/* Be careful, this will clobber the lr register. */
+#define LOAD_REG_ADDR_PIC(reg, name)		\
+	bl	0f;				\
+0:	mflr	reg;				\
+	addis	reg,reg,(name - 0b)@ha;		\
+	addi	reg,reg,(name - 0b)@l;
+
 #ifdef __powerpc64__
 #define LOAD_REG_IMMEDIATE(reg,expr)		\
 	lis     reg,(expr)@highest;		\

arch/powerpc/include/asm/processor.h

@@ -256,6 +256,8 @@ struct thread_struct {
 	unsigned long	evr[32];	/* upper 32-bits of SPE regs */
 	u64		acc;		/* Accumulator */
 	unsigned long	spefscr;	/* SPE & eFP status */
+	unsigned long	spefscr_last;	/* SPEFSCR value on last prctl
+					   call or trap return */
 	int		used_spe;	/* set if process has used spe */
 #endif /* CONFIG_SPE */
 #ifdef CONFIG_PPC_TRANSACTIONAL_MEM
@@ -317,7 +319,9 @@ struct thread_struct {
 	(_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack)
 
 #ifdef CONFIG_SPE
-#define SPEFSCR_INIT .spefscr = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE,
+#define SPEFSCR_INIT \
+	.spefscr = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE, \
+	.spefscr_last = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE,
 #else
 #define SPEFSCR_INIT
 #endif

arch/powerpc/include/asm/reg.h

@@ -1075,6 +1075,8 @@
 #define PVR_8560	0x80200000
 #define PVR_VER_E500V1	0x8020
 #define PVR_VER_E500V2	0x8021
+#define PVR_VER_E6500	0x8040
+
 /*
  * For the 8xx processors, all of them report the same PVR family for
  * the PowerPC core. The various versions of these processors must be

arch/powerpc/include/asm/reg_booke.h

@@ -101,6 +101,7 @@
 #define SPRN_IVOR39	0x1B1	/* Interrupt Vector Offset Register 39 */
 #define SPRN_IVOR40	0x1B2	/* Interrupt Vector Offset Register 40 */
 #define SPRN_IVOR41	0x1B3	/* Interrupt Vector Offset Register 41 */
+#define SPRN_IVOR42	0x1B4	/* Interrupt Vector Offset Register 42 */
 #define SPRN_GIVOR2	0x1B8	/* Guest IVOR2 */
 #define SPRN_GIVOR3	0x1B9	/* Guest IVOR3 */
 #define SPRN_GIVOR4	0x1BA	/* Guest IVOR4 */
@@ -170,6 +171,7 @@
 #define SPRN_L2CSR1	0x3FA	/* L2 Data Cache Control and Status Register 1 */
 #define SPRN_DCCR	0x3FA	/* Data Cache Cacheability Register */
 #define SPRN_ICCR	0x3FB	/* Instruction Cache Cacheability Register */
+#define SPRN_PWRMGTCR0	0x3FB	/* Power management control register 0 */
 #define SPRN_SVR	0x3FF	/* System Version Register */
 
 /*
@@ -216,6 +218,14 @@
 #define	CCR1_DPC	0x00000100 /* Disable L1 I-Cache/D-Cache parity checking */
 #define	CCR1_TCS	0x00000080 /* Timer Clock Select */
 
+/* Bit definitions for PWRMGTCR0. */
+#define PWRMGTCR0_PW20_WAIT		(1 << 14) /* PW20 state enable bit */
+#define PWRMGTCR0_PW20_ENT_SHIFT	8
+#define PWRMGTCR0_PW20_ENT		0x3F00
+#define PWRMGTCR0_AV_IDLE_PD_EN		(1 << 22) /* Altivec idle enable */
+#define PWRMGTCR0_AV_IDLE_CNT_SHIFT	16
+#define PWRMGTCR0_AV_IDLE_CNT		0x3F0000
+
 /* Bit definitions for the MCSR. */
 #define MCSR_MCS	0x80000000 /* Machine Check Summary */
 #define MCSR_IB		0x40000000 /* Instruction PLB Error */

arch/powerpc/kernel/asm-offsets.c

@@ -203,6 +203,15 @@ int main(void)
 	DEFINE(PACA_MC_STACK, offsetof(struct paca_struct, mc_kstack));
 	DEFINE(PACA_CRIT_STACK, offsetof(struct paca_struct, crit_kstack));
 	DEFINE(PACA_DBG_STACK, offsetof(struct paca_struct, dbg_kstack));
+	DEFINE(PACA_TCD_PTR, offsetof(struct paca_struct, tcd_ptr));
+
+	DEFINE(TCD_ESEL_NEXT,
+		offsetof(struct tlb_core_data, esel_next));
+	DEFINE(TCD_ESEL_MAX,
+		offsetof(struct tlb_core_data, esel_max));
+	DEFINE(TCD_ESEL_FIRST,
+		offsetof(struct tlb_core_data, esel_first));
+	DEFINE(TCD_LOCK, offsetof(struct tlb_core_data, lock));
 #endif /* CONFIG_PPC_BOOK3E */
 
 #ifdef CONFIG_PPC_STD_MMU_64

arch/powerpc/kernel/cpu_setup_fsl_booke.S

@@ -53,11 +53,57 @@ _GLOBAL(__e500_dcache_setup)
 	isync
 	blr
 
+/*
+ * FIXME - we haven't yet done testing to determine a reasonable default
+ * value for PW20_WAIT_IDLE_BIT.
+ */
+#define PW20_WAIT_IDLE_BIT		50 /* 1ms, TB frequency is 41.66MHZ */
+_GLOBAL(setup_pw20_idle)
+	mfspr	r3, SPRN_PWRMGTCR0
+
+	/* Set PW20_WAIT bit, enable pw20 state*/
+	ori	r3, r3, PWRMGTCR0_PW20_WAIT
+	li	r11, PW20_WAIT_IDLE_BIT
+
+	/* Set Automatic PW20 Core Idle Count */
+	rlwimi	r3, r11, PWRMGTCR0_PW20_ENT_SHIFT, PWRMGTCR0_PW20_ENT
+
+	mtspr	SPRN_PWRMGTCR0, r3
+
+	blr
+
+/*
+ * FIXME - we haven't yet done testing to determine a reasonable default
+ * value for AV_WAIT_IDLE_BIT.
+ */
+#define AV_WAIT_IDLE_BIT		50 /* 1ms, TB frequency is 41.66MHZ */
+_GLOBAL(setup_altivec_idle)
+	mfspr	r3, SPRN_PWRMGTCR0
+
+	/* Enable Altivec Idle */
+	oris	r3, r3, PWRMGTCR0_AV_IDLE_PD_EN@h
+	li	r11, AV_WAIT_IDLE_BIT
+
+	/* Set Automatic AltiVec Idle Count */
+	rlwimi	r3, r11, PWRMGTCR0_AV_IDLE_CNT_SHIFT, PWRMGTCR0_AV_IDLE_CNT
+
+	mtspr	SPRN_PWRMGTCR0, r3
+
+	blr
+
 _GLOBAL(__setup_cpu_e6500)
 	mflr	r6
 #ifdef CONFIG_PPC64
 	bl	.setup_altivec_ivors
+	/* Touch IVOR42 only if the CPU supports E.HV category */
+	mfspr	r10,SPRN_MMUCFG
+	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
+	beq	1f
+	bl	.setup_lrat_ivor
+1:
 #endif
+	bl	setup_pw20_idle
+	bl	setup_altivec_idle
 	bl	__setup_cpu_e5500
 	mtlr	r6
 	blr
@@ -119,6 +165,14 @@ _GLOBAL(__setup_cpu_e5500)
 _GLOBAL(__restore_cpu_e6500)
 	mflr	r5
 	bl	.setup_altivec_ivors
+	/* Touch IVOR42 only if the CPU supports E.HV category */
+	mfspr	r10,SPRN_MMUCFG
+	rlwinm.	r10,r10,0,MMUCFG_LPIDSIZE
+	beq	1f
+	bl	.setup_lrat_ivor
+1:
+	bl	.setup_pw20_idle
+	bl	.setup_altivec_idle
 	bl	__restore_cpu_e5500
 	mtlr	r5
 	blr

arch/powerpc/kernel/exceptions-64e.S

@@ -308,6 +308,7 @@ interrupt_base_book3e:					/* fake trap */
 	EXCEPTION_STUB(0x2e0, guest_doorbell_crit)
 	EXCEPTION_STUB(0x300, hypercall)
 	EXCEPTION_STUB(0x320, ehpriv)
+	EXCEPTION_STUB(0x340, lrat_error)
 
 	.globl interrupt_end_book3e
 interrupt_end_book3e:
@@ -677,6 +678,17 @@ kernel_dbg_exc:
 	bl	.unknown_exception
 	b	.ret_from_except
 
+/* LRAT Error interrupt */
+	START_EXCEPTION(lrat_error);
+	NORMAL_EXCEPTION_PROLOG(0x340, BOOKE_INTERRUPT_LRAT_ERROR,
+			        PROLOG_ADDITION_NONE)
+	EXCEPTION_COMMON(0x340, PACA_EXGEN, INTS_KEEP)
+	addi	r3,r1,STACK_FRAME_OVERHEAD
+	bl	.save_nvgprs
+	INTS_RESTORE_HARD
+	bl	.unknown_exception
+	b	.ret_from_except
+
 /*
  * An interrupt came in while soft-disabled; We mark paca->irq_happened
  * accordingly and if the interrupt is level sensitive, we hard disable
@@ -859,6 +871,7 @@ BAD_STACK_TRAMPOLINE(0x2e0)
 BAD_STACK_TRAMPOLINE(0x300)
 BAD_STACK_TRAMPOLINE(0x310)
 BAD_STACK_TRAMPOLINE(0x320)
+BAD_STACK_TRAMPOLINE(0x340)
 BAD_STACK_TRAMPOLINE(0x400)
 BAD_STACK_TRAMPOLINE(0x500)
 BAD_STACK_TRAMPOLINE(0x600)
@@ -1055,12 +1068,9 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	mtspr	SPRN_MAS0,r3
 	tlbre
 	mfspr	r6,SPRN_MAS1
-	rlwinm	r6,r6,0,2,0	/* clear IPROT */
+	rlwinm	r6,r6,0,2,31	/* clear IPROT and VALID */
 	mtspr	SPRN_MAS1,r6
 	tlbwe
-
-	/* Invalidate TLB1 */
-	PPC_TLBILX_ALL(0,R0)
 	sync
 	isync
 
@@ -1114,12 +1124,9 @@ skpinv:	addi	r6,r6,1				/* Increment */
 	mtspr	SPRN_MAS0,r4
 	tlbre
 	mfspr	r5,SPRN_MAS1
-	rlwinm	r5,r5,0,2,0	/* clear IPROT */
+	rlwinm	r5,r5,0,2,31	/* clear IPROT and VALID */
 	mtspr	SPRN_MAS1,r5
 	tlbwe
-
-	/* Invalidate TLB1 */
-	PPC_TLBILX_ALL(0,R0)
 	sync
 	isync
 
@@ -1414,3 +1421,7 @@ _GLOBAL(setup_ehv_ivors)
 	SET_IVOR(38, 0x2c0) /* Guest Processor Doorbell */
 	SET_IVOR(39, 0x2e0) /* Guest Processor Doorbell Crit/MC */
 	blr
+
+_GLOBAL(setup_lrat_ivor)
+	SET_IVOR(42, 0x340) /* LRAT Error */
+	blr

arch/powerpc/kernel/fsl_booke_entry_mapping.S

@@ -176,6 +176,8 @@ skpinv:	addi	r6,r6,1				/* Increment */
 /* 7. Jump to KERNELBASE mapping */
 	lis	r6,(KERNELBASE & ~0xfff)@h
 	ori	r6,r6,(KERNELBASE & ~0xfff)@l
+	rlwinm	r7,r25,0,0x03ffffff
+	add	r6,r7,r6
 
 #elif defined(ENTRY_MAPPING_KEXEC_SETUP)
 /*

arch/powerpc/kernel/head_fsl_booke.S

@@ -65,29 +65,78 @@ _ENTRY(_start);
 	nop
 
 	/* Translate device tree address to physical, save in r30/r31 */
-	mfmsr	r16
-	mfspr	r17,SPRN_PID
-	rlwinm	r17,r17,16,0x3fff0000	/* turn PID into MAS6[SPID] */
-	rlwimi	r17,r16,28,0x00000001	/* turn MSR[DS] into MAS6[SAS] */
-	mtspr	SPRN_MAS6,r17
-
-	tlbsx	0,r3			/* must succeed */
-
-	mfspr	r16,SPRN_MAS1
-	mfspr	r20,SPRN_MAS3
-	rlwinm	r17,r16,25,0x1f		/* r17 = log2(page size) */
-	li	r18,1024
-	slw	r18,r18,r17		/* r18 = page size */
-	addi	r18,r18,-1
-	and	r19,r3,r18		/* r19 = page offset */
-	andc	r31,r20,r18		/* r31 = page base */
-	or	r31,r31,r19		/* r31 = devtree phys addr */
-	mfspr	r30,SPRN_MAS7
+	bl	get_phys_addr
+	mr	r30,r3
+	mr	r31,r4
 
 	li	r25,0			/* phys kernel start (low) */
 	li	r24,0			/* CPU number */
 	li	r23,0			/* phys kernel start (high) */
 
+#ifdef CONFIG_RELOCATABLE
+	LOAD_REG_ADDR_PIC(r3, _stext)	/* Get our current runtime base */
+
+	/* Translate _stext address to physical, save in r23/r25 */
+	bl	get_phys_addr
+	mr	r23,r3
+	mr	r25,r4
+
+	bl	0f
+0:	mflr	r8
+	addis	r3,r8,(is_second_reloc - 0b)@ha
+	lwz	r19,(is_second_reloc - 0b)@l(r3)
+
+	/* Check if this is the second relocation. */
+	cmpwi	r19,1
+	bne	1f
+
+	/*
+	 * For the second relocation, we already get the real memstart_addr
+	 * from device tree. So we will map PAGE_OFFSET to memstart_addr,
+	 * then the virtual address of start kernel should be:
+	 *          PAGE_OFFSET + (kernstart_addr - memstart_addr)
+	 * Since the offset between kernstart_addr and memstart_addr should
+	 * never be beyond 1G, so we can just use the lower 32bit of them
+	 * for the calculation.
+	 */
+	lis	r3,PAGE_OFFSET@h
+
+	addis	r4,r8,(kernstart_addr - 0b)@ha
+	addi	r4,r4,(kernstart_addr - 0b)@l
+	lwz	r5,4(r4)
+
+	addis	r6,r8,(memstart_addr - 0b)@ha
+	addi	r6,r6,(memstart_addr - 0b)@l
+	lwz	r7,4(r6)
+
+	subf	r5,r7,r5
+	add	r3,r3,r5
+	b	2f
+
+1:
+	/*
+	 * We have the runtime (virutal) address of our base.
+	 * We calculate our shift of offset from a 64M page.
+	 * We could map the 64M page we belong to at PAGE_OFFSET and
+	 * get going from there.
+	 */
+	lis	r4,KERNELBASE@h
+	ori	r4,r4,KERNELBASE@l
+	rlwinm	r6,r25,0,0x3ffffff		/* r6 = PHYS_START % 64M */
+	rlwinm	r5,r4,0,0x3ffffff		/* r5 = KERNELBASE % 64M */
+	subf	r3,r5,r6			/* r3 = r6 - r5 */
+	add	r3,r4,r3			/* Required Virtual Address */
+
+2:	bl	relocate
+
+	/*
+	 * For the second relocation, we already set the right tlb entries
+	 * for the kernel space, so skip the code in fsl_booke_entry_mapping.S
+	*/
+	cmpwi	r19,1
+	beq	set_ivor
+#endif
+
 /* We try to not make any assumptions about how the boot loader
  * setup or used the TLBs.  We invalidate all mappings from the
  * boot loader and load a single entry in TLB1[0] to map the
@@ -113,6 +162,7 @@ _ENTRY(__early_start)
 #include "fsl_booke_entry_mapping.S"
 #undef ENTRY_MAPPING_BOOT_SETUP
 
+set_ivor:
 	/* Establish the interrupt vector offsets */
 	SET_IVOR(0,  CriticalInput);
 	SET_IVOR(1,  MachineCheck);
@@ -166,8 +216,7 @@ _ENTRY(__early_start)
 	/* Check to see if we're the second processor, and jump
 	 * to the secondary_start code if so
 	 */
-	lis	r24, boot_cpuid@h
-	ori	r24, r24, boot_cpuid@l
+	LOAD_REG_ADDR_PIC(r24, boot_cpuid)
 	lwz	r24, 0(r24)
 	cmpwi	r24, -1
 	mfspr   r24,SPRN_PIR
@@ -197,6 +246,18 @@ _ENTRY(__early_start)
 
 	bl	early_init
 
+#ifdef CONFIG_RELOCATABLE
+	mr	r3,r30
+	mr	r4,r31
+#ifdef CONFIG_PHYS_64BIT
+	mr	r5,r23
+	mr	r6,r25
+#else
+	mr	r5,r25
+#endif
+	bl	relocate_init
+#endif
+
 #ifdef CONFIG_DYNAMIC_MEMSTART
 	lis	r3,kernstart_addr@ha
 	la	r3,kernstart_addr@l(r3)
@@ -855,6 +916,33 @@ KernelSPE:
 
 #endif /* CONFIG_SPE */
 
+/*
+ * Translate the effec addr in r3 to phys addr. The phys addr will be put
+ * into r3(higher 32bit) and r4(lower 32bit)
+ */
+get_phys_addr:
+	mfmsr	r8
+	mfspr	r9,SPRN_PID
+	rlwinm	r9,r9,16,0x3fff0000	/* turn PID into MAS6[SPID] */
+	rlwimi	r9,r8,28,0x00000001	/* turn MSR[DS] into MAS6[SAS] */
+	mtspr	SPRN_MAS6,r9
+
+	tlbsx	0,r3			/* must succeed */
+
+	mfspr	r8,SPRN_MAS1
+	mfspr	r12,SPRN_MAS3
+	rlwinm	r9,r8,25,0x1f		/* r9 = log2(page size) */
+	li	r10,1024
+	slw	r10,r10,r9		/* r10 = page size */
+	addi	r10,r10,-1
+	and	r11,r3,r10		/* r11 = page offset */
+	andc	r4,r12,r10		/* r4 = page base */
+	or	r4,r4,r11		/* r4 = devtree phys addr */
+#ifdef CONFIG_PHYS_64BIT
+	mfspr	r3,SPRN_MAS7
+#endif
+	blr
+
 /*
  * Global functions
  */
@@ -1057,24 +1145,36 @@ _GLOBAL(__flush_disable_L1)
 /* When we get here, r24 needs to hold the CPU # */
 	.globl __secondary_start
 __secondary_start:
-	lis	r3,__secondary_hold_acknowledge@h
-	ori	r3,r3,__secondary_hold_acknowledge@l
-	stw	r24,0(r3)
-
-	li	r3,0
-	mr	r4,r24		/* Why? */
-	bl	call_setup_cpu
-
-	lis	r3,tlbcam_index@ha
-	lwz	r3,tlbcam_index@l(r3)
+	LOAD_REG_ADDR_PIC(r3, tlbcam_index)
+	lwz	r3,0(r3)
 	mtctr	r3
 	li	r26,0		/* r26 safe? */
 
+	bl	switch_to_as1
+	mr	r27,r3		/* tlb entry */
 	/* Load each CAM entry */
 1:	mr	r3,r26
 	bl	loadcam_entry
 	addi	r26,r26,1
 	bdnz	1b
+	mr	r3,r27		/* tlb entry */
+	LOAD_REG_ADDR_PIC(r4, memstart_addr)
+	lwz	r4,0(r4)
+	mr	r5,r25		/* phys kernel start */
+	rlwinm	r5,r5,0,~0x3ffffff	/* aligned 64M */
+	subf	r4,r5,r4	/* memstart_addr - phys kernel start */
+	li	r5,0		/* no device tree */
+	li	r6,0		/* not boot cpu */
+	bl	restore_to_as0
+
+
+	lis	r3,__secondary_hold_acknowledge@h
+	ori	r3,r3,__secondary_hold_acknowledge@l
+	stw	r24,0(r3)
+
+	li	r3,0
+	mr	r4,r24		/* Why? */
+	bl	call_setup_cpu
 
 	/* get current_thread_info and current */
 	lis	r1,secondary_ti@ha
@@ -1110,6 +1210,112 @@ __secondary_hold_acknowledge:
 	.long	-1
 #endif
 
+/*
+ * Create a tlb entry with the same effective and physical address as
+ * the tlb entry used by the current running code. But set the TS to 1.
+ * Then switch to the address space 1. It will return with the r3 set to
+ * the ESEL of the new created tlb.
+ */
+_GLOBAL(switch_to_as1)
+	mflr	r5
+
+	/* Find a entry not used */
+	mfspr	r3,SPRN_TLB1CFG
+	andi.	r3,r3,0xfff
+	mfspr	r4,SPRN_PID
+	rlwinm	r4,r4,16,0x3fff0000	/* turn PID into MAS6[SPID] */
+	mtspr	SPRN_MAS6,r4
+1:	lis	r4,0x1000		/* Set MAS0(TLBSEL) = 1 */
+	addi	r3,r3,-1
+	rlwimi	r4,r3,16,4,15		/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r4
+	tlbre
+	mfspr	r4,SPRN_MAS1
+	andis.	r4,r4,MAS1_VALID@h
+	bne	1b
+
+	/* Get the tlb entry used by the current running code */
+	bl	0f
+0:	mflr	r4
+	tlbsx	0,r4
+
+	mfspr	r4,SPRN_MAS1
+	ori	r4,r4,MAS1_TS		/* Set the TS = 1 */
+	mtspr	SPRN_MAS1,r4
+
+	mfspr	r4,SPRN_MAS0
+	rlwinm	r4,r4,0,~MAS0_ESEL_MASK
+	rlwimi	r4,r3,16,4,15		/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r4
+	tlbwe
+	isync
+	sync
+
+	mfmsr	r4
+	ori	r4,r4,MSR_IS | MSR_DS
+	mtspr	SPRN_SRR0,r5
+	mtspr	SPRN_SRR1,r4
+	sync
+	rfi
+
+/*
+ * Restore to the address space 0 and also invalidate the tlb entry created
+ * by switch_to_as1.
+ * r3 - the tlb entry which should be invalidated
+ * r4 - __pa(PAGE_OFFSET in AS1) - __pa(PAGE_OFFSET in AS0)
+ * r5 - device tree virtual address. If r4 is 0, r5 is ignored.
+ * r6 - boot cpu
+*/
+_GLOBAL(restore_to_as0)
+	mflr	r0
+
+	bl	0f
+0:	mflr	r9
+	addi	r9,r9,1f - 0b
+
+	/*
+	 * We may map the PAGE_OFFSET in AS0 to a different physical address,
+	 * so we need calculate the right jump and device tree address based
+	 * on the offset passed by r4.
+	 */
+	add	r9,r9,r4
+	add	r5,r5,r4
+	add	r0,r0,r4
+
+2:	mfmsr	r7
+	li	r8,(MSR_IS | MSR_DS)
+	andc	r7,r7,r8
+
+	mtspr	SPRN_SRR0,r9
+	mtspr	SPRN_SRR1,r7
+	sync
+	rfi
+
+	/* Invalidate the temporary tlb entry for AS1 */
+1:	lis	r9,0x1000		/* Set MAS0(TLBSEL) = 1 */
+	rlwimi	r9,r3,16,4,15		/* Setup MAS0 = TLBSEL | ESEL(r3) */
+	mtspr	SPRN_MAS0,r9
+	tlbre
+	mfspr	r9,SPRN_MAS1
+	rlwinm	r9,r9,0,2,31		/* Clear MAS1 Valid and IPPROT */
+	mtspr	SPRN_MAS1,r9
+	tlbwe
+	isync
+
+	cmpwi	r4,0
+	cmpwi	cr1,r6,0
+	cror	eq,4*cr1+eq,eq
+	bne	3f			/* offset != 0 && is_boot_cpu */
+	mtlr	r0
+	blr
+
+	/*
+	 * The PAGE_OFFSET will map to a different physical address,
+	 * jump to _start to do another relocation again.
+	*/
+3:	mr	r3,r5
+	bl	_start
+
 /*
  * We put a few things here that have to be page-aligned. This stuff
  * goes at the beginning of the data segment, which is page-aligned.

arch/powerpc/kernel/paca.c

@@ -160,6 +160,11 @@ void __init initialise_paca(struct paca_struct *new_paca, int cpu)
 #ifdef CONFIG_PPC_STD_MMU_64
 	new_paca->slb_shadow_ptr = init_slb_shadow(cpu);
 #endif /* CONFIG_PPC_STD_MMU_64 */
+
+#ifdef CONFIG_PPC_BOOK3E
+	/* For now -- if we have threads this will be adjusted later */
+	new_paca->tcd_ptr = &new_paca->tcd;
+#endif
 }
 
 /* Put the paca pointer into r13 and SPRG_PACA */

arch/powerpc/kernel/process.c

@@ -1296,6 +1296,19 @@ int set_fpexc_mode(struct task_struct *tsk, unsigned int val)
 	if (val & PR_FP_EXC_SW_ENABLE) {
 #ifdef CONFIG_SPE
 		if (cpu_has_feature(CPU_FTR_SPE)) {
+			/*
+			 * When the sticky exception bits are set
+			 * directly by userspace, it must call prctl
+			 * with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE
+			 * in the existing prctl settings) or
+			 * PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in
+			 * the bits being set).  <fenv.h> functions
+			 * saving and restoring the whole
+			 * floating-point environment need to do so
+			 * anyway to restore the prctl settings from
+			 * the saved environment.
+			 */
+			tsk->thread.spefscr_last = mfspr(SPRN_SPEFSCR);
 			tsk->thread.fpexc_mode = val &
 				(PR_FP_EXC_SW_ENABLE | PR_FP_ALL_EXCEPT);
 			return 0;
@@ -1327,9 +1340,22 @@ int get_fpexc_mode(struct task_struct *tsk, unsigned long adr)
 
 	if (tsk->thread.fpexc_mode & PR_FP_EXC_SW_ENABLE)
 #ifdef CONFIG_SPE
-		if (cpu_has_feature(CPU_FTR_SPE))
+		if (cpu_has_feature(CPU_FTR_SPE)) {
+			/*
+			 * When the sticky exception bits are set
+			 * directly by userspace, it must call prctl
+			 * with PR_GET_FPEXC (with PR_FP_EXC_SW_ENABLE
+			 * in the existing prctl settings) or
+			 * PR_SET_FPEXC (with PR_FP_EXC_SW_ENABLE in
+			 * the bits being set).  <fenv.h> functions
+			 * saving and restoring the whole
+			 * floating-point environment need to do so
+			 * anyway to restore the prctl settings from
+			 * the saved environment.
+			 */
+			tsk->thread.spefscr_last = mfspr(SPRN_SPEFSCR);
 			val = tsk->thread.fpexc_mode;
-		else
+		} else
 			return -EINVAL;
 #else
 		return -EINVAL;

arch/powerpc/kernel/prom.c

@@ -523,6 +523,20 @@ static int __init early_init_dt_scan_memory_ppc(unsigned long node,
 	return early_init_dt_scan_memory(node, uname, depth, data);
 }
 
+/*
+ * For a relocatable kernel, we need to get the memstart_addr first,
+ * then use it to calculate the virtual kernel start address. This has
+ * to happen at a very early stage (before machine_init). In this case,
+ * we just want to get the memstart_address and would not like to mess the
+ * memblock at this stage. So introduce a variable to skip the memblock_add()
+ * for this reason.
+ */
+#ifdef CONFIG_RELOCATABLE
+static int add_mem_to_memblock = 1;
+#else
+#define add_mem_to_memblock 1
+#endif
+
 void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 {
 #ifdef CONFIG_PPC64
@@ -543,6 +557,7 @@ void __init early_init_dt_add_memory_arch(u64 base, u64 size)
 	}
 
 	/* Add the chunk to the MEMBLOCK list */
+	if (add_mem_to_memblock)
 		memblock_add(base, size);
 }
 
@@ -740,6 +755,30 @@ void __init early_init_devtree(void *params)
 	DBG(" <- early_init_devtree()\n");
 }
 
+#ifdef CONFIG_RELOCATABLE
+/*
+ * This function run before early_init_devtree, so we have to init
+ * initial_boot_params.
+ */
+void __init early_get_first_memblock_info(void *params, phys_addr_t *size)
+{
+	/* Setup flat device-tree pointer */
+	initial_boot_params = params;
+
+	/*
+	 * Scan the memory nodes and set add_mem_to_memblock to 0 to avoid
+	 * mess the memblock.
+	 */
+	add_mem_to_memblock = 0;
+	of_scan_flat_dt(early_init_dt_scan_root, NULL);
+	of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
+	add_mem_to_memblock = 1;
+
+	if (size)
+		*size = first_memblock_size;
+}
+#endif
+
 /*******
  *
  * New implementation of the OF "find" APIs, return a refcounted

arch/powerpc/kernel/setup_64.c

@@ -97,6 +97,36 @@ int dcache_bsize;
 int icache_bsize;
 int ucache_bsize;
 
+#if defined(CONFIG_PPC_BOOK3E) && defined(CONFIG_SMP)
+static void setup_tlb_core_data(void)
+{
+	int cpu;
+
+	for_each_possible_cpu(cpu) {
+		int first = cpu_first_thread_sibling(cpu);
+
+		paca[cpu].tcd_ptr = &paca[first].tcd;
+
+		/*
+		 * If we have threads, we need either tlbsrx.
+		 * or e6500 tablewalk mode, or else TLB handlers
+		 * will be racy and could produce duplicate entries.
+		 */
+		if (smt_enabled_at_boot >= 2 &&
+		    !mmu_has_feature(MMU_FTR_USE_TLBRSRV) &&
+		    book3e_htw_mode != PPC_HTW_E6500) {
+			/* Should we panic instead? */
+			WARN_ONCE("%s: unsupported MMU configuration -- expect problems\n",
+				  __func__);
+		}
+	}
+}
+#else
+static void setup_tlb_core_data(void)
+{
+}
+#endif
+
 #ifdef CONFIG_SMP
 
 static char *smt_enabled_cmdline;
@@ -445,6 +475,7 @@ void __init setup_system(void)
 
 	smp_setup_cpu_maps();
 	check_smt_enabled();
+	setup_tlb_core_data();
 
 #ifdef CONFIG_SMP
 	/* Release secondary cpus out of their spinloops at 0x60 now that

arch/powerpc/kernel/swsusp_booke.S

@@ -74,21 +74,21 @@ _GLOBAL(swsusp_arch_suspend)
 	bne	1b
 
 	/* Save SPRGs */
-	mfsprg	r4,0
+	mfspr	r4,SPRN_SPRG0
 	stw	r4,SL_SPRG0(r11)
-	mfsprg	r4,1
+	mfspr	r4,SPRN_SPRG1
 	stw	r4,SL_SPRG1(r11)
-	mfsprg	r4,2
+	mfspr	r4,SPRN_SPRG2
 	stw	r4,SL_SPRG2(r11)
-	mfsprg	r4,3
+	mfspr	r4,SPRN_SPRG3
 	stw	r4,SL_SPRG3(r11)
-	mfsprg	r4,4
+	mfspr	r4,SPRN_SPRG4
 	stw	r4,SL_SPRG4(r11)
-	mfsprg	r4,5
+	mfspr	r4,SPRN_SPRG5
 	stw	r4,SL_SPRG5(r11)
-	mfsprg	r4,6
+	mfspr	r4,SPRN_SPRG6
 	stw	r4,SL_SPRG6(r11)
-	mfsprg	r4,7
+	mfspr	r4,SPRN_SPRG7
 	stw	r4,SL_SPRG7(r11)
 
 	/* Call the low level suspend stuff (we should probably have made
@@ -150,21 +150,21 @@ _GLOBAL(swsusp_arch_resume)
 	bl	_tlbil_all
 
 	lwz	r4,SL_SPRG0(r11)
-	mtsprg	0,r4
+	mtspr	SPRN_SPRG0,r4
 	lwz	r4,SL_SPRG1(r11)
-	mtsprg	1,r4
+	mtspr	SPRN_SPRG1,r4
 	lwz	r4,SL_SPRG2(r11)
-	mtsprg	2,r4
+	mtspr	SPRN_SPRG2,r4
 	lwz	r4,SL_SPRG3(r11)
-	mtsprg	3,r4
+	mtspr	SPRN_SPRG3,r4
 	lwz	r4,SL_SPRG4(r11)
-	mtsprg	4,r4
+	mtspr	SPRN_SPRG4,r4
 	lwz	r4,SL_SPRG5(r11)
-	mtsprg	5,r4
+	mtspr	SPRN_SPRG5,r4
 	lwz	r4,SL_SPRG6(r11)
-	mtsprg	6,r4
+	mtspr	SPRN_SPRG6,r4
 	lwz	r4,SL_SPRG7(r11)
-	mtsprg	7,r4
+	mtspr	SPRN_SPRG7,r4
 
 	/* restore the MSR */
 	lwz	r3,SL_MSR(r11)

arch/powerpc/kernel/sysfs.c

@@ -86,6 +86,304 @@ __setup("smt-snooze-delay=", setup_smt_snooze_delay);
 
 #endif /* CONFIG_PPC64 */
 
+#ifdef CONFIG_PPC_FSL_BOOK3E
+#define MAX_BIT				63
+
+static u64 pw20_wt;
+static u64 altivec_idle_wt;
+
+static unsigned int get_idle_ticks_bit(u64 ns)
+{
+	u64 cycle;
+
+	if (ns >= 10000)
+		cycle = div_u64(ns + 500, 1000) * tb_ticks_per_usec;
+	else
+		cycle = div_u64(ns * tb_ticks_per_usec, 1000);
+
+	if (!cycle)
+		return 0;
+
+	return ilog2(cycle);
+}
+
+static void do_show_pwrmgtcr0(void *val)
+{
+	u32 *value = val;
+
+	*value = mfspr(SPRN_PWRMGTCR0);
+}
+
+static ssize_t show_pw20_state(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	u32 value;
+	unsigned int cpu = dev->id;
+
+	smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1);
+
+	value &= PWRMGTCR0_PW20_WAIT;
+
+	return sprintf(buf, "%u\n", value ? 1 : 0);
+}
+
+static void do_store_pw20_state(void *val)
+{
+	u32 *value = val;
+	u32 pw20_state;
+
+	pw20_state = mfspr(SPRN_PWRMGTCR0);
+
+	if (*value)
+		pw20_state |= PWRMGTCR0_PW20_WAIT;
+	else
+		pw20_state &= ~PWRMGTCR0_PW20_WAIT;
+
+	mtspr(SPRN_PWRMGTCR0, pw20_state);
+}
+
+static ssize_t store_pw20_state(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	u32 value;
+	unsigned int cpu = dev->id;
+
+	if (kstrtou32(buf, 0, &value))
+		return -EINVAL;
+
+	if (value > 1)
+		return -EINVAL;
+
+	smp_call_function_single(cpu, do_store_pw20_state, &value, 1);
+
+	return count;
+}
+
+static ssize_t show_pw20_wait_time(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	u32 value;
+	u64 tb_cycle = 1;
+	u64 time;
+
+	unsigned int cpu = dev->id;
+
+	if (!pw20_wt) {
+		smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1);
+		value = (value & PWRMGTCR0_PW20_ENT) >>
+					PWRMGTCR0_PW20_ENT_SHIFT;
+
+		tb_cycle = (tb_cycle << (MAX_BIT - value + 1));
+		/* convert ms to ns */
+		if (tb_ticks_per_usec > 1000) {
+			time = div_u64(tb_cycle, tb_ticks_per_usec / 1000);
+		} else {
+			u32 rem_us;
+
+			time = div_u64_rem(tb_cycle, tb_ticks_per_usec,
+						&rem_us);
+			time = time * 1000 + rem_us * 1000 / tb_ticks_per_usec;
+		}
+	} else {
+		time = pw20_wt;
+	}
+
+	return sprintf(buf, "%llu\n", time > 0 ? time : 0);
+}
+
+static void set_pw20_wait_entry_bit(void *val)
+{
+	u32 *value = val;
+	u32 pw20_idle;
+
+	pw20_idle = mfspr(SPRN_PWRMGTCR0);
+
+	/* Set Automatic PW20 Core Idle Count */
+	/* clear count */
+	pw20_idle &= ~PWRMGTCR0_PW20_ENT;
+
+	/* set count */
+	pw20_idle |= ((MAX_BIT - *value) << PWRMGTCR0_PW20_ENT_SHIFT);
+
+	mtspr(SPRN_PWRMGTCR0, pw20_idle);
+}
+
+static ssize_t store_pw20_wait_time(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	u32 entry_bit;
+	u64 value;
+
+	unsigned int cpu = dev->id;
+
+	if (kstrtou64(buf, 0, &value))
+		return -EINVAL;
+
+	if (!value)
+		return -EINVAL;
+
+	entry_bit = get_idle_ticks_bit(value);
+	if (entry_bit > MAX_BIT)
+		return -EINVAL;
+
+	pw20_wt = value;
+
+	smp_call_function_single(cpu, set_pw20_wait_entry_bit,
+				&entry_bit, 1);
+
+	return count;
+}
+
+static ssize_t show_altivec_idle(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	u32 value;
+	unsigned int cpu = dev->id;
+
+	smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1);
+
+	value &= PWRMGTCR0_AV_IDLE_PD_EN;
+
+	return sprintf(buf, "%u\n", value ? 1 : 0);
+}
+
+static void do_store_altivec_idle(void *val)
+{
+	u32 *value = val;
+	u32 altivec_idle;
+
+	altivec_idle = mfspr(SPRN_PWRMGTCR0);
+
+	if (*value)
+		altivec_idle |= PWRMGTCR0_AV_IDLE_PD_EN;
+	else
+		altivec_idle &= ~PWRMGTCR0_AV_IDLE_PD_EN;
+
+	mtspr(SPRN_PWRMGTCR0, altivec_idle);
+}
+
+static ssize_t store_altivec_idle(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	u32 value;
+	unsigned int cpu = dev->id;
+
+	if (kstrtou32(buf, 0, &value))
+		return -EINVAL;
+
+	if (value > 1)
+		return -EINVAL;
+
+	smp_call_function_single(cpu, do_store_altivec_idle, &value, 1);
+
+	return count;
+}
+
+static ssize_t show_altivec_idle_wait_time(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	u32 value;
+	u64 tb_cycle = 1;
+	u64 time;
+
+	unsigned int cpu = dev->id;
+
+	if (!altivec_idle_wt) {
+		smp_call_function_single(cpu, do_show_pwrmgtcr0, &value, 1);
+		value = (value & PWRMGTCR0_AV_IDLE_CNT) >>
+					PWRMGTCR0_AV_IDLE_CNT_SHIFT;
+
+		tb_cycle = (tb_cycle << (MAX_BIT - value + 1));
+		/* convert ms to ns */
+		if (tb_ticks_per_usec > 1000) {
+			time = div_u64(tb_cycle, tb_ticks_per_usec / 1000);
+		} else {
+			u32 rem_us;
+
+			time = div_u64_rem(tb_cycle, tb_ticks_per_usec,
+						&rem_us);
+			time = time * 1000 + rem_us * 1000 / tb_ticks_per_usec;
+		}
+	} else {
+		time = altivec_idle_wt;
+	}
+
+	return sprintf(buf, "%llu\n", time > 0 ? time : 0);
+}
+
+static void set_altivec_idle_wait_entry_bit(void *val)
+{
+	u32 *value = val;
+	u32 altivec_idle;
+
+	altivec_idle = mfspr(SPRN_PWRMGTCR0);
+
+	/* Set Automatic AltiVec Idle Count */
+	/* clear count */
+	altivec_idle &= ~PWRMGTCR0_AV_IDLE_CNT;
+
+	/* set count */
+	altivec_idle |= ((MAX_BIT - *value) << PWRMGTCR0_AV_IDLE_CNT_SHIFT);
+
+	mtspr(SPRN_PWRMGTCR0, altivec_idle);
+}
+
+static ssize_t store_altivec_idle_wait_time(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	u32 entry_bit;
+	u64 value;
+
+	unsigned int cpu = dev->id;
+
+	if (kstrtou64(buf, 0, &value))
+		return -EINVAL;
+
+	if (!value)
+		return -EINVAL;
+
+	entry_bit = get_idle_ticks_bit(value);
+	if (entry_bit > MAX_BIT)
+		return -EINVAL;
+
+	altivec_idle_wt = value;
+
+	smp_call_function_single(cpu, set_altivec_idle_wait_entry_bit,
+				&entry_bit, 1);
+
+	return count;
+}
+
+/*
+ * Enable/Disable interface:
+ * 0, disable. 1, enable.
+ */
+static DEVICE_ATTR(pw20_state, 0600, show_pw20_state, store_pw20_state);
+static DEVICE_ATTR(altivec_idle, 0600, show_altivec_idle, store_altivec_idle);
+
+/*
+ * Set wait time interface:(Nanosecond)
+ * Example: Base on TBfreq is 41MHZ.
+ * 1~48(ns): TB[63]
+ * 49~97(ns): TB[62]
+ * 98~195(ns): TB[61]
+ * 196~390(ns): TB[60]
+ * 391~780(ns): TB[59]
+ * 781~1560(ns): TB[58]
+ * ...
+ */
+static DEVICE_ATTR(pw20_wait_time, 0600,
+			show_pw20_wait_time,
+			store_pw20_wait_time);
+static DEVICE_ATTR(altivec_idle_wait_time, 0600,
+			show_altivec_idle_wait_time,
+			store_altivec_idle_wait_time);
+#endif
+
 /*
  * Enabling PMCs will slow partition context switch times so we only do
  * it the first time we write to the PMCs.
@@ -425,6 +723,15 @@ static void register_cpu_online(unsigned int cpu)
 		device_create_file(s, &dev_attr_pir);
 #endif /* CONFIG_PPC64 */
 
+#ifdef CONFIG_PPC_FSL_BOOK3E
+	if (PVR_VER(cur_cpu_spec->pvr_value) == PVR_VER_E6500) {
+		device_create_file(s, &dev_attr_pw20_state);
+		device_create_file(s, &dev_attr_pw20_wait_time);
+
+		device_create_file(s, &dev_attr_altivec_idle);
+		device_create_file(s, &dev_attr_altivec_idle_wait_time);
+	}
+#endif
 	cacheinfo_cpu_online(cpu);
 }
 
@@ -497,6 +804,15 @@ static void unregister_cpu_online(unsigned int cpu)
 		device_remove_file(s, &dev_attr_pir);
 #endif /* CONFIG_PPC64 */
 
+#ifdef CONFIG_PPC_FSL_BOOK3E
+	if (PVR_VER(cur_cpu_spec->pvr_value) == PVR_VER_E6500) {
+		device_remove_file(s, &dev_attr_pw20_state);
+		device_remove_file(s, &dev_attr_pw20_wait_time);
+
+		device_remove_file(s, &dev_attr_altivec_idle);
+		device_remove_file(s, &dev_attr_altivec_idle_wait_time);
+	}
+#endif
 	cacheinfo_cpu_offline(cpu);
 }
 

arch/powerpc/kvm/bookehv_interrupts.S

@@ -319,6 +319,8 @@ kvm_handler BOOKE_INTERRUPT_DEBUG, EX_PARAMS(DBG), \
 	SPRN_DSRR0, SPRN_DSRR1, 0
 kvm_handler BOOKE_INTERRUPT_DEBUG, EX_PARAMS(CRIT), \
 	SPRN_CSRR0, SPRN_CSRR1, 0
+kvm_handler BOOKE_INTERRUPT_LRAT_ERROR, EX_PARAMS(GEN), \
+	SPRN_SRR0, SPRN_SRR1, (NEED_EMU | NEED_DEAR | NEED_ESR)
 #else
 /*
  * For input register values, see arch/powerpc/include/asm/kvm_booke_hv_asm.h

arch/powerpc/mm/fsl_booke_mmu.c

@@ -52,6 +52,7 @@
 #include <asm/smp.h>
 #include <asm/machdep.h>
 #include <asm/setup.h>
+#include <asm/paca.h>
 
 #include "mmu_decl.h"
 
@@ -171,11 +172,10 @@ unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
 	return 1UL << camsize;
 }
 
-unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
+static unsigned long map_mem_in_cams_addr(phys_addr_t phys, unsigned long virt,
+					unsigned long ram, int max_cam_idx)
 {
 	int i;
-	unsigned long virt = PAGE_OFFSET;
-	phys_addr_t phys = memstart_addr;
 	unsigned long amount_mapped = 0;
 
 	/* Calculate CAM values */
@@ -192,9 +192,23 @@ unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
 	}
 	tlbcam_index = i;
 
+#ifdef CONFIG_PPC64
+	get_paca()->tcd.esel_next = i;
+	get_paca()->tcd.esel_max = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
+	get_paca()->tcd.esel_first = i;
+#endif
+
 	return amount_mapped;
 }
 
+unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx)
+{
+	unsigned long virt = PAGE_OFFSET;
+	phys_addr_t phys = memstart_addr;
+
+	return map_mem_in_cams_addr(phys, virt, ram, max_cam_idx);
+}
+
 #ifdef CONFIG_PPC32
 
 #if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS)
@@ -222,7 +236,9 @@ void __init adjust_total_lowmem(void)
 	/* adjust lowmem size to __max_low_memory */
 	ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem);
 
+	i = switch_to_as1();
 	__max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM);
+	restore_to_as0(i, 0, 0, 1);
 
 	pr_info("Memory CAM mapping: ");
 	for (i = 0; i < tlbcam_index - 1; i++)
@@ -241,4 +257,62 @@ void setup_initial_memory_limit(phys_addr_t first_memblock_base,
 	/* 64M mapped initially according to head_fsl_booke.S */
 	memblock_set_current_limit(min_t(u64, limit, 0x04000000));
 }
+
+#ifdef CONFIG_RELOCATABLE
+int __initdata is_second_reloc;
+notrace void __init relocate_init(u64 dt_ptr, phys_addr_t start)
+{
+	unsigned long base = KERNELBASE;
+
+	kernstart_addr = start;
+	if (is_second_reloc) {
+		virt_phys_offset = PAGE_OFFSET - memstart_addr;
+		return;
+	}
+
+	/*
+	 * Relocatable kernel support based on processing of dynamic
+	 * relocation entries. Before we get the real memstart_addr,
+	 * We will compute the virt_phys_offset like this:
+	 * virt_phys_offset = stext.run - kernstart_addr
+	 *
+	 * stext.run = (KERNELBASE & ~0x3ffffff) +
+	 *				(kernstart_addr & 0x3ffffff)
+	 * When we relocate, we have :
+	 *
+	 *	(kernstart_addr & 0x3ffffff) = (stext.run & 0x3ffffff)
+	 *
+	 * hence:
+	 *  virt_phys_offset = (KERNELBASE & ~0x3ffffff) -
+	 *                              (kernstart_addr & ~0x3ffffff)
+	 *
+	 */
+	start &= ~0x3ffffff;
+	base &= ~0x3ffffff;
+	virt_phys_offset = base - start;
+	early_get_first_memblock_info(__va(dt_ptr), NULL);
+	/*
+	 * We now get the memstart_addr, then we should check if this
+	 * address is the same as what the PAGE_OFFSET map to now. If
+	 * not we have to change the map of PAGE_OFFSET to memstart_addr
+	 * and do a second relocation.
+	 */
+	if (start != memstart_addr) {
+		int n;
+		long offset = start - memstart_addr;
+
+		is_second_reloc = 1;
+		n = switch_to_as1();
+		/* map a 64M area for the second relocation */
+		if (memstart_addr > start)
+			map_mem_in_cams(0x4000000, CONFIG_LOWMEM_CAM_NUM);
+		else
+			map_mem_in_cams_addr(start, PAGE_OFFSET + offset,
+					0x4000000, CONFIG_LOWMEM_CAM_NUM);
+		restore_to_as0(n, offset, __va(dt_ptr), 1);
+		/* We should never reach here */
+		panic("Relocation error");
+	}
+}
+#endif
 #endif

arch/powerpc/mm/hugetlbpage-book3e.c

@@ -8,6 +8,44 @@
 #include <linux/mm.h>
 #include <linux/hugetlb.h>
 
+#ifdef CONFIG_PPC_FSL_BOOK3E
+#ifdef CONFIG_PPC64
+static inline int tlb1_next(void)
+{
+	struct paca_struct *paca = get_paca();
+	struct tlb_core_data *tcd;
+	int this, next;
+
+	tcd = paca->tcd_ptr;
+	this = tcd->esel_next;
+
+	next = this + 1;
+	if (next >= tcd->esel_max)
+		next = tcd->esel_first;
+
+	tcd->esel_next = next;
+	return this;
+}
+#else
+static inline int tlb1_next(void)
+{
+	int index, ncams;
+
+	ncams = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
+
+	index = __get_cpu_var(next_tlbcam_idx);
+
+	/* Just round-robin the entries and wrap when we hit the end */
+	if (unlikely(index == ncams - 1))
+		__get_cpu_var(next_tlbcam_idx) = tlbcam_index;
+	else
+		__get_cpu_var(next_tlbcam_idx)++;
+
+	return index;
+}
+#endif /* !PPC64 */
+#endif /* FSL */
+
 static inline int mmu_get_tsize(int psize)
 {
 	return mmu_psize_defs[psize].enc;
@@ -47,7 +85,7 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
 	struct mm_struct *mm;
 
 #ifdef CONFIG_PPC_FSL_BOOK3E
-	int index, ncams;
+	int index;
 #endif
 
 	if (unlikely(is_kernel_addr(ea)))
@@ -77,18 +115,11 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
 	}
 
 #ifdef CONFIG_PPC_FSL_BOOK3E
-	ncams = mfspr(SPRN_TLB1CFG) & TLBnCFG_N_ENTRY;
-
 	/* We have to use the CAM(TLB1) on FSL parts for hugepages */
-	index = __get_cpu_var(next_tlbcam_idx);
+	index = tlb1_next();
 	mtspr(SPRN_MAS0, MAS0_ESEL(index) | MAS0_TLBSEL(1));
-
-	/* Just round-robin the entries and wrap when we hit the end */
-	if (unlikely(index == ncams - 1))
-		__get_cpu_var(next_tlbcam_idx) = tlbcam_index;
-	else
-		__get_cpu_var(next_tlbcam_idx)++;
 #endif
+
 	mas1 = MAS1_VALID | MAS1_TID(mm->context.id) | MAS1_TSIZE(tsize);
 	mas2 = ea & ~((1UL << shift) - 1);
 	mas2 |= (pte_val(pte) >> PTE_WIMGE_SHIFT) & MAS2_WIMGE_MASK;
@@ -103,6 +134,7 @@ void book3e_hugetlb_preload(struct vm_area_struct *vma, unsigned long ea,
 	if (mmu_has_feature(MMU_FTR_USE_PAIRED_MAS)) {
 		mtspr(SPRN_MAS7_MAS3, mas7_3);
 	} else {
+		if (mmu_has_feature(MMU_FTR_BIG_PHYS))
 			mtspr(SPRN_MAS7, upper_32_bits(mas7_3));
 		mtspr(SPRN_MAS3, lower_32_bits(mas7_3));
 	}

arch/powerpc/mm/mem.c

@@ -307,6 +307,12 @@ static void __init register_page_bootmem_info(void)
 
 void __init mem_init(void)
 {
+	/*
+	 * book3s is limited to 16 page sizes due to encoding this in
+	 * a 4-bit field for slices.
+	 */
+	BUILD_BUG_ON(MMU_PAGE_COUNT > 16);
+
 #ifdef CONFIG_SWIOTLB
 	swiotlb_init(0);
 #endif

arch/powerpc/mm/mmu_decl.h

@@ -148,6 +148,8 @@ extern unsigned long calc_cam_sz(unsigned long ram, unsigned long virt,
 extern void MMU_init_hw(void);
 extern unsigned long mmu_mapin_ram(unsigned long top);
 extern void adjust_total_lowmem(void);
+extern int switch_to_as1(void);
+extern void restore_to_as0(int esel, int offset, void *dt_ptr, int bootcpu);
 #endif
 extern void loadcam_entry(unsigned int index);
 

arch/powerpc/mm/pgtable_32.c

@@ -299,6 +299,7 @@ int map_page(unsigned long va, phys_addr_t pa, int flags)
 		set_pte_at(&init_mm, va, pg, pfn_pte(pa >> PAGE_SHIFT,
 						     __pgprot(flags)));
 	}
+	smp_wmb();
 	return err;
 }
 

arch/powerpc/mm/pgtable_64.c

@@ -152,6 +152,18 @@ int map_kernel_page(unsigned long ea, unsigned long pa, int flags)
 		}
 #endif /* !CONFIG_PPC_MMU_NOHASH */
 	}
+
+#ifdef CONFIG_PPC_BOOK3E_64
+	/*
+	 * With hardware tablewalk, a sync is needed to ensure that
+	 * subsequent accesses see the PTE we just wrote.  Unlike userspace
+	 * mappings, we can't tolerate spurious faults, so make sure
+	 * the new PTE will be seen the first time.
+	 */
+	mb();
+#else
+	smp_wmb();
+#endif
 	return 0;
 }
 

arch/powerpc/mm/tlb_low_64e.S

@@ -136,7 +136,7 @@ BEGIN_MMU_FTR_SECTION
 	 */
 	PPC_TLBSRX_DOT(0,R16)
 	ldx	r14,r14,r15		/* grab pgd entry */
-	beq	normal_tlb_miss_done	/* tlb exists already, bail */
+	beq	tlb_miss_done_bolted	/* tlb exists already, bail */
 MMU_FTR_SECTION_ELSE
 	ldx	r14,r14,r15		/* grab pgd entry */
 ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV)
@@ -192,6 +192,7 @@ ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV)
 	mtspr	SPRN_MAS7_MAS3,r15
 	tlbwe
 
+tlb_miss_done_bolted:
 	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK)
 	tlb_epilog_bolted
 	rfi
@@ -239,6 +240,177 @@ itlb_miss_fault_bolted:
 	beq	tlb_miss_common_bolted
 	b	itlb_miss_kernel_bolted
 
+/*
+ * TLB miss handling for e6500 and derivatives, using hardware tablewalk.
+ *
+ * Linear mapping is bolted: no virtual page table or nested TLB misses
+ * Indirect entries in TLB1, hardware loads resulting direct entries
+ *    into TLB0
+ * No HES or NV hint on TLB1, so we need to do software round-robin
+ * No tlbsrx. so we need a spinlock, and we have to deal
+ *    with MAS-damage caused by tlbsx
+ * 4K pages only
+ */
+
+	START_EXCEPTION(instruction_tlb_miss_e6500)
+	tlb_prolog_bolted BOOKE_INTERRUPT_ITLB_MISS SPRN_SRR0
+
+	ld	r11,PACA_TCD_PTR(r13)
+	srdi.	r15,r16,60		/* get region */
+	ori	r16,r16,1
+
+	TLB_MISS_STATS_SAVE_INFO_BOLTED
+	bne	tlb_miss_kernel_e6500	/* user/kernel test */
+
+	b	tlb_miss_common_e6500
+
+	START_EXCEPTION(data_tlb_miss_e6500)
+	tlb_prolog_bolted BOOKE_INTERRUPT_DTLB_MISS SPRN_DEAR
+
+	ld	r11,PACA_TCD_PTR(r13)
+	srdi.	r15,r16,60		/* get region */
+	rldicr	r16,r16,0,62
+
+	TLB_MISS_STATS_SAVE_INFO_BOLTED
+	bne	tlb_miss_kernel_e6500	/* user vs kernel check */
+
+/*
+ * This is the guts of the TLB miss handler for e6500 and derivatives.
+ * We are entered with:
+ *
+ * r16 = page of faulting address (low bit 0 if data, 1 if instruction)
+ * r15 = crap (free to use)
+ * r14 = page table base
+ * r13 = PACA
+ * r11 = tlb_per_core ptr
+ * r10 = crap (free to use)
+ */
+tlb_miss_common_e6500:
+	/*
+	 * Search if we already have an indirect entry for that virtual
+	 * address, and if we do, bail out.
+	 *
+	 * MAS6:IND should be already set based on MAS4
+	 */
+	addi	r10,r11,TCD_LOCK
+1:	lbarx	r15,0,r10
+	cmpdi	r15,0
+	bne	2f
+	li	r15,1
+	stbcx.	r15,0,r10
+	bne	1b
+	.subsection 1
+2:	lbz	r15,0(r10)
+	cmpdi	r15,0
+	bne	2b
+	b	1b
+	.previous
+
+	mfspr	r15,SPRN_MAS2
+
+	tlbsx	0,r16
+	mfspr	r10,SPRN_MAS1
+	andis.	r10,r10,MAS1_VALID@h
+	bne	tlb_miss_done_e6500
+
+	/* Undo MAS-damage from the tlbsx */
+	mfspr	r10,SPRN_MAS1
+	oris	r10,r10,MAS1_VALID@h
+	mtspr	SPRN_MAS1,r10
+	mtspr	SPRN_MAS2,r15
+
+	/* Now, we need to walk the page tables. First check if we are in
+	 * range.
+	 */
+	rldicl.	r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
+	bne-	tlb_miss_fault_e6500
+
+	rldicl	r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3
+	cmpldi	cr0,r14,0
+	clrrdi	r15,r15,3
+	beq-	tlb_miss_fault_e6500 /* No PGDIR, bail */
+	ldx	r14,r14,r15		/* grab pgd entry */
+
+	rldicl	r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3
+	clrrdi	r15,r15,3
+	cmpdi	cr0,r14,0
+	bge	tlb_miss_fault_e6500	/* Bad pgd entry or hugepage; bail */
+	ldx	r14,r14,r15		/* grab pud entry */
+
+	rldicl	r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3
+	clrrdi	r15,r15,3
+	cmpdi	cr0,r14,0
+	bge	tlb_miss_fault_e6500
+	ldx	r14,r14,r15		/* Grab pmd entry */
+
+	mfspr	r10,SPRN_MAS0
+	cmpdi	cr0,r14,0
+	bge	tlb_miss_fault_e6500
+
+	/* Now we build the MAS for a 2M indirect page:
+	 *
+	 * MAS 0   :	ESEL needs to be filled by software round-robin
+	 * MAS 1   :	Fully set up
+	 *               - PID already updated by caller if necessary
+	 *               - TSIZE for now is base ind page size always
+	 *               - TID already cleared if necessary
+	 * MAS 2   :	Default not 2M-aligned, need to be redone
+	 * MAS 3+7 :	Needs to be done
+	 */
+
+	ori	r14,r14,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT)
+	mtspr	SPRN_MAS7_MAS3,r14
+
+	clrrdi	r15,r16,21		/* make EA 2M-aligned */
+	mtspr	SPRN_MAS2,r15
+
+	lbz	r15,TCD_ESEL_NEXT(r11)
+	lbz	r16,TCD_ESEL_MAX(r11)
+	lbz	r14,TCD_ESEL_FIRST(r11)
+	rlwimi	r10,r15,16,0x00ff0000	/* insert esel_next into MAS0 */
+	addi	r15,r15,1		/* increment esel_next */
+	mtspr	SPRN_MAS0,r10
+	cmpw	r15,r16
+	iseleq	r15,r14,r15		/* if next == last use first */
+	stb	r15,TCD_ESEL_NEXT(r11)
+
+	tlbwe
+
+tlb_miss_done_e6500:
+	.macro	tlb_unlock_e6500
+	li	r15,0
+	isync
+	stb	r15,TCD_LOCK(r11)
+	.endm
+
+	tlb_unlock_e6500
+	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK)
+	tlb_epilog_bolted
+	rfi
+
+tlb_miss_kernel_e6500:
+	mfspr	r10,SPRN_MAS1
+	ld	r14,PACA_KERNELPGD(r13)
+	cmpldi	cr0,r15,8		/* Check for vmalloc region */
+	rlwinm	r10,r10,0,16,1		/* Clear TID */
+	mtspr	SPRN_MAS1,r10
+	beq+	tlb_miss_common_e6500
+
+tlb_miss_fault_e6500:
+	tlb_unlock_e6500
+	/* We need to check if it was an instruction miss */
+	andi.	r16,r16,1
+	bne	itlb_miss_fault_e6500
+dtlb_miss_fault_e6500:
+	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
+	tlb_epilog_bolted
+	b	exc_data_storage_book3e
+itlb_miss_fault_e6500:
+	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
+	tlb_epilog_bolted
+	b	exc_instruction_storage_book3e
+
+
 /**********************************************************************
  *                                                                    *
  * TLB miss handling for Book3E with TLB reservation and HES support  *

arch/powerpc/mm/tlb_nohash.c

@@ -43,6 +43,7 @@
 #include <asm/tlb.h>
 #include <asm/code-patching.h>
 #include <asm/hugetlb.h>
+#include <asm/paca.h>
 
 #include "mmu_decl.h"
 
@@ -58,6 +59,10 @@ struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT] = {
 		.shift	= 12,
 		.enc	= BOOK3E_PAGESZ_4K,
 	},
+	[MMU_PAGE_2M] = {
+		.shift	= 21,
+		.enc	= BOOK3E_PAGESZ_2M,
+	},
 	[MMU_PAGE_4M] = {
 		.shift	= 22,
 		.enc	= BOOK3E_PAGESZ_4M,
@@ -136,7 +141,7 @@ static inline int mmu_get_tsize(int psize)
 int mmu_linear_psize;		/* Page size used for the linear mapping */
 int mmu_pte_psize;		/* Page size used for PTE pages */
 int mmu_vmemmap_psize;		/* Page size used for the virtual mem map */
-int book3e_htw_enabled;		/* Is HW tablewalk enabled ? */
+int book3e_htw_mode;		/* HW tablewalk?  Value is PPC_HTW_* */
 unsigned long linear_map_top;	/* Top of linear mapping */
 
 #endif /* CONFIG_PPC64 */
@@ -377,7 +382,7 @@ void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address)
 {
 	int tsize = mmu_psize_defs[mmu_pte_psize].enc;
 
-	if (book3e_htw_enabled) {
+	if (book3e_htw_mode != PPC_HTW_NONE) {
 		unsigned long start = address & PMD_MASK;
 		unsigned long end = address + PMD_SIZE;
 		unsigned long size = 1UL << mmu_psize_defs[mmu_pte_psize].shift;
@@ -430,7 +435,7 @@ static void setup_page_sizes(void)
 			def = &mmu_psize_defs[psize];
 			shift = def->shift;
 
-			if (shift == 0)
+			if (shift == 0 || shift & 1)
 				continue;
 
 			/* adjust to be in terms of 4^shift Kb */
@@ -440,21 +445,40 @@ static void setup_page_sizes(void)
 				def->flags |= MMU_PAGE_SIZE_DIRECT;
 		}
 
-		goto no_indirect;
+		goto out;
 	}
 
 	if (fsl_mmu && (mmucfg & MMUCFG_MAVN) == MMUCFG_MAVN_V2) {
-		u32 tlb1ps = mfspr(SPRN_TLB1PS);
+		u32 tlb1cfg, tlb1ps;
+
+		tlb0cfg = mfspr(SPRN_TLB0CFG);
+		tlb1cfg = mfspr(SPRN_TLB1CFG);
+		tlb1ps = mfspr(SPRN_TLB1PS);
+		eptcfg = mfspr(SPRN_EPTCFG);
+
+		if ((tlb1cfg & TLBnCFG_IND) && (tlb0cfg & TLBnCFG_PT))
+			book3e_htw_mode = PPC_HTW_E6500;
+
+		/*
+		 * We expect 4K subpage size and unrestricted indirect size.
+		 * The lack of a restriction on indirect size is a Freescale
+		 * extension, indicated by PSn = 0 but SPSn != 0.
+		 */
+		if (eptcfg != 2)
+			book3e_htw_mode = PPC_HTW_NONE;
 
 		for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
 			struct mmu_psize_def *def = &mmu_psize_defs[psize];
 
 			if (tlb1ps & (1U << (def->shift - 10))) {
 				def->flags |= MMU_PAGE_SIZE_DIRECT;
+
+				if (book3e_htw_mode && psize == MMU_PAGE_2M)
+					def->flags |= MMU_PAGE_SIZE_INDIRECT;
 			}
 		}
 
-		goto no_indirect;
+		goto out;
 	}
 #endif
 
@@ -471,8 +495,11 @@ static void setup_page_sizes(void)
 	}
 
 	/* Indirect page sizes supported ? */
-	if ((tlb0cfg & TLBnCFG_IND) == 0)
-		goto no_indirect;
+	if ((tlb0cfg & TLBnCFG_IND) == 0 ||
+	    (tlb0cfg & TLBnCFG_PT) == 0)
+		goto out;
+
+	book3e_htw_mode = PPC_HTW_IBM;
 
 	/* Now, we only deal with one IND page size for each
 	 * direct size. Hopefully all implementations today are
@@ -497,8 +524,8 @@ static void setup_page_sizes(void)
 				def->ind = ps + 10;
 		}
 	}
- no_indirect:
 
+out:
 	/* Cleanup array and print summary */
 	pr_info("MMU: Supported page sizes\n");
 	for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
@@ -520,23 +547,23 @@ static void setup_page_sizes(void)
 
 static void setup_mmu_htw(void)
 {
-	/* Check if HW tablewalk is present, and if yes, enable it by:
-	 *
-	 * - patching the TLB miss handlers to branch to the
-	 *   one dedicates to it
-	 *
-	 * - setting the global book3e_htw_enabled
+	/*
+	 * If we want to use HW tablewalk, enable it by patching the TLB miss
+	 * handlers to branch to the one dedicated to it.
 	 */
-	unsigned int tlb0cfg = mfspr(SPRN_TLB0CFG);
 
-	if ((tlb0cfg & TLBnCFG_IND) &&
-	    (tlb0cfg & TLBnCFG_PT)) {
+	switch (book3e_htw_mode) {
+	case PPC_HTW_IBM:
 		patch_exception(0x1c0, exc_data_tlb_miss_htw_book3e);
 		patch_exception(0x1e0, exc_instruction_tlb_miss_htw_book3e);
-		book3e_htw_enabled = 1;
+		break;
+	case PPC_HTW_E6500:
+		patch_exception(0x1c0, exc_data_tlb_miss_e6500_book3e);
+		patch_exception(0x1e0, exc_instruction_tlb_miss_e6500_book3e);
+		break;
 	}
 	pr_info("MMU: Book3E HW tablewalk %s\n",
-		book3e_htw_enabled ? "enabled" : "not supported");
+		book3e_htw_mode != PPC_HTW_NONE ? "enabled" : "not supported");
 }
 
 /*
@@ -576,8 +603,16 @@ static void __early_init_mmu(int boot_cpu)
 	/* Set MAS4 based on page table setting */
 
 	mas4 = 0x4 << MAS4_WIMGED_SHIFT;
-	if (book3e_htw_enabled) {
-		mas4 |= mas4 | MAS4_INDD;
+	switch (book3e_htw_mode) {
+	case PPC_HTW_E6500:
+		mas4 |= MAS4_INDD;
+		mas4 |= BOOK3E_PAGESZ_2M << MAS4_TSIZED_SHIFT;
+		mas4 |= MAS4_TLBSELD(1);
+		mmu_pte_psize = MMU_PAGE_2M;
+		break;
+
+	case PPC_HTW_IBM:
+		mas4 |= MAS4_INDD;
 #ifdef CONFIG_PPC_64K_PAGES
 		mas4 |=	BOOK3E_PAGESZ_256M << MAS4_TSIZED_SHIFT;
 		mmu_pte_psize = MMU_PAGE_256M;
@@ -585,13 +620,16 @@ static void __early_init_mmu(int boot_cpu)
 		mas4 |=	BOOK3E_PAGESZ_1M << MAS4_TSIZED_SHIFT;
 		mmu_pte_psize = MMU_PAGE_1M;
 #endif
-	} else {
+		break;
+
+	case PPC_HTW_NONE:
 #ifdef CONFIG_PPC_64K_PAGES
 		mas4 |=	BOOK3E_PAGESZ_64K << MAS4_TSIZED_SHIFT;
 #else
 		mas4 |=	BOOK3E_PAGESZ_4K << MAS4_TSIZED_SHIFT;
 #endif
 		mmu_pte_psize = mmu_virtual_psize;
+		break;
 	}
 	mtspr(SPRN_MAS4, mas4);
 
@@ -611,8 +649,11 @@ static void __early_init_mmu(int boot_cpu)
 		/* limit memory so we dont have linear faults */
 		memblock_enforce_memory_limit(linear_map_top);
 
+		if (book3e_htw_mode == PPC_HTW_NONE) {
 			patch_exception(0x1c0, exc_data_tlb_miss_bolted_book3e);
-		patch_exception(0x1e0, exc_instruction_tlb_miss_bolted_book3e);
+			patch_exception(0x1e0,
+				exc_instruction_tlb_miss_bolted_book3e);
+		}
 	}
 #endif
 

arch/powerpc/mm/tlb_nohash_low.S

@@ -402,7 +402,9 @@ _GLOBAL(set_context)
  * Load TLBCAM[index] entry in to the L2 CAM MMU
  */
 _GLOBAL(loadcam_entry)
-	LOAD_REG_ADDR(r4, TLBCAM)
+	mflr	r5
+	LOAD_REG_ADDR_PIC(r4, TLBCAM)
+	mtlr	r5
 	mulli	r5,r3,TLBCAM_SIZE
 	add	r3,r5,r4
 	lwz	r4,TLBCAM_MAS0(r3)

arch/powerpc/platforms/85xx/Kconfig

@@ -123,6 +123,12 @@ config P1023_RDS
 	help
 	  This option enables support for the P1023 RDS and RDB boards
 
+config TWR_P102x
+	bool "Freescale TWR-P102x"
+	select DEFAULT_UIMAGE
+	help
+	  This option enables support for the TWR-P1025 board.
+
 config SOCRATES
 	bool "Socrates"
 	select DEFAULT_UIMAGE

arch/powerpc/platforms/85xx/Makefile

@@ -18,6 +18,7 @@ obj-$(CONFIG_P1010_RDB)   += p1010rdb.o
 obj-$(CONFIG_P1022_DS)    += p1022_ds.o
 obj-$(CONFIG_P1022_RDK)   += p1022_rdk.o
 obj-$(CONFIG_P1023_RDS)   += p1023_rds.o
+obj-$(CONFIG_TWR_P102x)   += twr_p102x.o
 obj-$(CONFIG_CORENET_GENERIC)   += corenet_generic.o
 obj-$(CONFIG_STX_GP3)	  += stx_gp3.o
 obj-$(CONFIG_TQM85xx)	  += tqm85xx.o

arch/powerpc/platforms/85xx/common.c

@@ -9,6 +9,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 
+#include <asm/qe.h>
 #include <sysdev/cpm2_pic.h>
 
 #include "mpc85xx.h"
@@ -82,3 +83,40 @@ void __init mpc85xx_cpm2_pic_init(void)
 	irq_set_chained_handler(irq, cpm2_cascade);
 }
 #endif
+
+#ifdef CONFIG_QUICC_ENGINE
+void __init mpc85xx_qe_init(void)
+{
+	struct device_node *np;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
+	if (!np) {
+		np = of_find_node_by_name(NULL, "qe");
+		if (!np) {
+			pr_err("%s: Could not find Quicc Engine node\n",
+					__func__);
+			return;
+		}
+	}
+
+	if (!of_device_is_available(np)) {
+		of_node_put(np);
+		return;
+	}
+
+	qe_reset();
+	of_node_put(np);
+
+	np = of_find_node_by_name(NULL, "par_io");
+	if (np) {
+		struct device_node *ucc;
+
+		par_io_init(np);
+		of_node_put(np);
+
+		for_each_node_by_name(ucc, "ucc")
+			par_io_of_config(ucc);
+
+	}
+}
+#endif

arch/powerpc/platforms/85xx/mpc85xx.h

@@ -8,4 +8,10 @@ extern void mpc85xx_cpm2_pic_init(void);
 static inline void __init mpc85xx_cpm2_pic_init(void) {}
 #endif /* CONFIG_CPM2 */
 
+#ifdef CONFIG_QUICC_ENGINE
+extern void mpc85xx_qe_init(void);
+#else
+static inline void __init mpc85xx_qe_init(void) {}
+#endif
+
 #endif

arch/powerpc/platforms/85xx/mpc85xx_mds.c

 /*
- * Copyright (C) 2006-2010, 2012 Freescale Semiconductor, Inc.
+ * Copyright (C) 2006-2010, 2012-2013 Freescale Semiconductor, Inc.
  * All rights reserved.
  *
  * Author: Andy Fleming <afleming@freescale.com>
@@ -238,32 +238,7 @@ static void __init mpc85xx_mds_qe_init(void)
 {
 	struct device_node *np;
 
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!np) {
-		np = of_find_node_by_name(NULL, "qe");
-		if (!np)
-			return;
-	}
-
-	if (!of_device_is_available(np)) {
-		of_node_put(np);
-		return;
-	}
-
-	qe_reset();
-	of_node_put(np);
-
-	np = of_find_node_by_name(NULL, "par_io");
-	if (np) {
-		struct device_node *ucc;
-
-		par_io_init(np);
-		of_node_put(np);
-
-		for_each_node_by_name(ucc, "ucc")
-			par_io_of_config(ucc);
-	}
-
+	mpc85xx_qe_init();
 	mpc85xx_mds_reset_ucc_phys();
 
 	if (machine_is(p1021_mds)) {

arch/powerpc/platforms/85xx/mpc85xx_rdb.c

 /*
  * MPC85xx RDB Board Setup
  *
- * Copyright 2009,2012 Freescale Semiconductor Inc.
+ * Copyright 2009,2012-2013 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -98,26 +98,7 @@ static void __init mpc85xx_rdb_setup_arch(void)
 	fsl_pci_assign_primary();
 
 #ifdef CONFIG_QUICC_ENGINE
-	np = of_find_compatible_node(NULL, NULL, "fsl,qe");
-	if (!np) {
-		pr_err("%s: Could not find Quicc Engine node\n", __func__);
-		goto qe_fail;
-	}
-
-	qe_reset();
-	of_node_put(np);
-
-	np = of_find_node_by_name(NULL, "par_io");
-	if (np) {
-		struct device_node *ucc;
-
-		par_io_init(np);
-		of_node_put(np);
-
-		for_each_node_by_name(ucc, "ucc")
-			par_io_of_config(ucc);
-
-	}
+	mpc85xx_qe_init();
 #if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
 	if (machine_is(p1025_rdb)) {
 
@@ -148,8 +129,6 @@ static void __init mpc85xx_rdb_setup_arch(void)
 
 	}
 #endif
-
-qe_fail:
 #endif	/* CONFIG_QUICC_ENGINE */
 
 	printk(KERN_INFO "MPC85xx RDB board from Freescale Semiconductor\n");

arch/powerpc/platforms/85xx/smp.c

@@ -389,15 +389,18 @@ static void mpc85xx_smp_machine_kexec(struct kimage *image)
 }
 #endif /* CONFIG_KEXEC */
 
-static void smp_85xx_setup_cpu(int cpu_nr)
+static void smp_85xx_basic_setup(int cpu_nr)
 {
-	if (smp_85xx_ops.probe == smp_mpic_probe)
-		mpic_setup_this_cpu();
-
 	if (cpu_has_feature(CPU_FTR_DBELL))
 		doorbell_setup_this_cpu();
 }
 
+static void smp_85xx_setup_cpu(int cpu_nr)
+{
+	mpic_setup_this_cpu();
+	smp_85xx_basic_setup(cpu_nr);
+}
+
 static const struct of_device_id mpc85xx_smp_guts_ids[] = {
 	{ .compatible = "fsl,mpc8572-guts", },
 	{ .compatible = "fsl,p1020-guts", },
@@ -412,13 +415,14 @@ void __init mpc85xx_smp_init(void)
 {
 	struct device_node *np;
 
-	smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu;
 
 	np = of_find_node_by_type(NULL, "open-pic");
 	if (np) {
 		smp_85xx_ops.probe = smp_mpic_probe;
+		smp_85xx_ops.setup_cpu = smp_85xx_setup_cpu;
 		smp_85xx_ops.message_pass = smp_mpic_message_pass;
-	}
+	} else
+		smp_85xx_ops.setup_cpu = smp_85xx_basic_setup;
 
 	if (cpu_has_feature(CPU_FTR_DBELL)) {
 		/*
@@ -427,6 +431,7 @@ void __init mpc85xx_smp_init(void)
 		 */
 		smp_85xx_ops.message_pass = NULL;
 		smp_85xx_ops.cause_ipi = doorbell_cause_ipi;
+		smp_85xx_ops.probe = NULL;
 	}
 
 	np = of_find_matching_node(NULL, mpc85xx_smp_guts_ids);

arch/powerpc/platforms/85xx/twr_p102x.c

+/*
+ * Copyright 2010-2011, 2013 Freescale Semiconductor, Inc.
+ *
+ * Author: Michael Johnston <michael.johnston@freescale.com>
+ *
+ * Description:
+ * TWR-P102x Board Setup
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/of_platform.h>
+
+#include <asm/pci-bridge.h>
+#include <asm/udbg.h>
+#include <asm/mpic.h>
+#include <asm/qe.h>
+#include <asm/qe_ic.h>
+#include <asm/fsl_guts.h>
+
+#include <sysdev/fsl_soc.h>
+#include <sysdev/fsl_pci.h>
+#include "smp.h"
+
+#include "mpc85xx.h"
+
+static void __init twr_p1025_pic_init(void)
+{
+	struct mpic *mpic;
+
+#ifdef CONFIG_QUICC_ENGINE
+	struct device_node *np;
+#endif
+
+	mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN |
+			MPIC_SINGLE_DEST_CPU,
+			0, 256, " OpenPIC  ");
+
+	BUG_ON(mpic == NULL);
+	mpic_init(mpic);
+
+#ifdef CONFIG_QUICC_ENGINE
+	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
+	if (np) {
+		qe_ic_init(np, 0, qe_ic_cascade_low_mpic,
+				qe_ic_cascade_high_mpic);
+		of_node_put(np);
+	} else
+		pr_err("Could not find qe-ic node\n");
+#endif
+}
+
+/* ************************************************************************
+ *
+ * Setup the architecture
+ *
+ */
+static void __init twr_p1025_setup_arch(void)
+{
+#ifdef CONFIG_QUICC_ENGINE
+	struct device_node *np;
+#endif
+
+	if (ppc_md.progress)
+		ppc_md.progress("twr_p1025_setup_arch()", 0);
+
+	mpc85xx_smp_init();
+
+	fsl_pci_assign_primary();
+
+#ifdef CONFIG_QUICC_ENGINE
+	mpc85xx_qe_init();
+
+#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE)
+	if (machine_is(twr_p1025)) {
+		struct ccsr_guts __iomem *guts;
+
+		np = of_find_compatible_node(NULL, NULL, "fsl,p1021-guts");
+		if (np) {
+			guts = of_iomap(np, 0);
+			if (!guts)
+				pr_err("twr_p1025: could not map global utilities register\n");
+			else {
+			/* P1025 has pins muxed for QE and other functions. To
+			 * enable QE UEC mode, we need to set bit QE0 for UCC1
+			 * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9
+			 * and QE12 for QE MII management signals in PMUXCR
+			 * register.
+			 * Set QE mux bits in PMUXCR */
+			setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) |
+					MPC85xx_PMUXCR_QE(3) |
+					MPC85xx_PMUXCR_QE(9) |
+					MPC85xx_PMUXCR_QE(12));
+			iounmap(guts);
+
+#if defined(CONFIG_SERIAL_QE)
+			/* On P1025TWR board, the UCC7 acted as UART port.
+			 * However, The UCC7's CTS pin is low level in default,
+			 * it will impact the transmission in full duplex
+			 * communication. So disable the Flow control pin PA18.
+			 * The UCC7 UART just can use RXD and TXD pins.
+			 */
+			par_io_config_pin(0, 18, 0, 0, 0, 0);
+#endif
+			/* Drive PB29 to CPLD low - CPLD will then change
+			 * muxing from LBC to QE */
+			par_io_config_pin(1, 29, 1, 0, 0, 0);
+			par_io_data_set(1, 29, 0);
+			}
+			of_node_put(np);
+		}
+	}
+#endif
+#endif	/* CONFIG_QUICC_ENGINE */
+
+	pr_info("TWR-P1025 board from Freescale Semiconductor\n");
+}
+
+machine_arch_initcall(twr_p1025, mpc85xx_common_publish_devices);
+
+static int __init twr_p1025_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "fsl,TWR-P1025");
+}
+
+define_machine(twr_p1025) {
+	.name			= "TWR-P1025",
+	.probe			= twr_p1025_probe,
+	.setup_arch		= twr_p1025_setup_arch,
+	.init_IRQ		= twr_p1025_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};

arch/powerpc/platforms/embedded6xx/Kconfig

@@ -67,6 +67,18 @@ config PPC_C2K
 	  This option enables support for the GE Fanuc C2K board (formerly
 	  an SBS board).
 
+config MVME5100
+	bool "Motorola/Emerson MVME5100"
+	depends on EMBEDDED6xx
+	select MPIC
+	select PCI
+	select PPC_INDIRECT_PCI
+	select PPC_I8259
+	select PPC_NATIVE
+	help
+	  This option enables support for the Motorola (now Emerson) MVME5100
+	  board.
+
 config TSI108_BRIDGE
 	bool
 	select PCI
@@ -113,4 +125,3 @@ config WII
 	help
 	  Select WII if configuring for the Nintendo Wii.
 	  More information at: <http://gc-linux.sourceforge.net/>
-

arch/powerpc/platforms/embedded6xx/Makefile

@@ -11,3 +11,4 @@ obj-$(CONFIG_USBGECKO_UDBG)	+= usbgecko_udbg.o
 obj-$(CONFIG_GAMECUBE_COMMON)	+= flipper-pic.o
 obj-$(CONFIG_GAMECUBE)		+= gamecube.o
 obj-$(CONFIG_WII)		+= wii.o hlwd-pic.o
+obj-$(CONFIG_MVME5100)		+= mvme5100.o

arch/powerpc/platforms/embedded6xx/mvme5100.c

+/*
+ * Board setup routines for the Motorola/Emerson MVME5100.
+ *
+ * Copyright 2013 CSC Australia Pty. Ltd.
+ *
+ * Based on earlier code by:
+ *
+ *    Matt Porter, MontaVista Software Inc.
+ *    Copyright 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Author: Stephen Chivers <schivers@csc.com>
+ *
+ */
+
+#include <linux/of_platform.h>
+
+#include <asm/i8259.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpic.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#define HAWK_MPIC_SIZE		0x00040000U
+#define MVME5100_PCI_MEM_OFFSET 0x00000000
+
+/* Board register addresses. */
+#define BOARD_STATUS_REG	0xfef88080
+#define BOARD_MODFAIL_REG	0xfef88090
+#define BOARD_MODRST_REG	0xfef880a0
+#define BOARD_TBEN_REG		0xfef880c0
+#define BOARD_SW_READ_REG	0xfef880e0
+#define BOARD_GEO_ADDR_REG	0xfef880e8
+#define BOARD_EXT_FEATURE1_REG	0xfef880f0
+#define BOARD_EXT_FEATURE2_REG	0xfef88100
+
+static phys_addr_t pci_membase;
+static u_char *restart;
+
+static void mvme5100_8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	unsigned int cascade_irq = i8259_irq();
+
+	if (cascade_irq != NO_IRQ)
+		generic_handle_irq(cascade_irq);
+
+	chip->irq_eoi(&desc->irq_data);
+}
+
+static void __init mvme5100_pic_init(void)
+{
+	struct mpic *mpic;
+	struct device_node *np;
+	struct device_node *cp = NULL;
+	unsigned int cirq;
+	unsigned long intack = 0;
+	const u32 *prop = NULL;
+
+	np = of_find_node_by_type(NULL, "open-pic");
+	if (!np) {
+		pr_err("Could not find open-pic node\n");
+		return;
+	}
+
+	mpic = mpic_alloc(np, pci_membase, 0, 16, 256, " OpenPIC  ");
+
+	BUG_ON(mpic == NULL);
+	of_node_put(np);
+
+	mpic_assign_isu(mpic, 0, pci_membase + 0x10000);
+
+	mpic_init(mpic);
+
+	cp = of_find_compatible_node(NULL, NULL, "chrp,iic");
+	if (cp == NULL) {
+		pr_warn("mvme5100_pic_init: couldn't find i8259\n");
+		return;
+	}
+
+	cirq = irq_of_parse_and_map(cp, 0);
+	if (cirq == NO_IRQ) {
+		pr_warn("mvme5100_pic_init: no cascade interrupt?\n");
+		return;
+	}
+
+	np = of_find_compatible_node(NULL, "pci", "mpc10x-pci");
+	if (np) {
+		prop = of_get_property(np, "8259-interrupt-acknowledge", NULL);
+
+		if (prop)
+			intack = prop[0];
+
+		of_node_put(np);
+	}
+
+	if (intack)
+		pr_debug("mvme5100_pic_init: PCI 8259 intack at 0x%016lx\n",
+		   intack);
+
+	i8259_init(cp, intack);
+	of_node_put(cp);
+	irq_set_chained_handler(cirq, mvme5100_8259_cascade);
+}
+
+static int __init mvme5100_add_bridge(struct device_node *dev)
+{
+	const int		*bus_range;
+	int			len;
+	struct pci_controller	*hose;
+	unsigned short		devid;
+
+	pr_info("Adding PCI host bridge %s\n", dev->full_name);
+
+	bus_range = of_get_property(dev, "bus-range", &len);
+
+	hose = pcibios_alloc_controller(dev);
+	if (hose == NULL)
+		return -ENOMEM;
+
+	hose->first_busno = bus_range ? bus_range[0] : 0;
+	hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+	setup_indirect_pci(hose, 0xfe000cf8, 0xfe000cfc, 0);
+
+	pci_process_bridge_OF_ranges(hose, dev, 1);
+
+	early_read_config_word(hose, 0, 0, PCI_DEVICE_ID, &devid);
+
+	if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK) {
+		pr_err("HAWK PHB not present?\n");
+		return 0;
+	}
+
+	early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
+
+	if (pci_membase == 0) {
+		pr_err("HAWK PHB mibar not correctly set?\n");
+		return 0;
+	}
+
+	pr_info("mvme5100_pic_init: pci_membase: %x\n", pci_membase);
+
+	return 0;
+}
+
+static struct of_device_id mvme5100_of_bus_ids[] __initdata = {
+	{ .compatible = "hawk-bridge", },
+	{},
+};
+
+/*
+ * Setup the architecture
+ */
+static void __init mvme5100_setup_arch(void)
+{
+	struct device_node *np;
+
+	if (ppc_md.progress)
+		ppc_md.progress("mvme5100_setup_arch()", 0);
+
+	for_each_compatible_node(np, "pci", "hawk-pci")
+		mvme5100_add_bridge(np);
+
+	restart = ioremap(BOARD_MODRST_REG, 4);
+}
+
+
+static void mvme5100_show_cpuinfo(struct seq_file *m)
+{
+	seq_puts(m, "Vendor\t\t: Motorola/Emerson\n");
+	seq_puts(m, "Machine\t\t: MVME5100\n");
+}
+
+static void mvme5100_restart(char *cmd)
+{
+
+	local_irq_disable();
+	mtmsr(mfmsr() | MSR_IP);
+
+	out_8((u_char *) restart, 0x01);
+
+	while (1)
+		;
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mvme5100_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	return of_flat_dt_is_compatible(root, "MVME5100");
+}
+
+static int __init probe_of_platform_devices(void)
+{
+
+	of_platform_bus_probe(NULL, mvme5100_of_bus_ids, NULL);
+	return 0;
+}
+
+machine_device_initcall(mvme5100, probe_of_platform_devices);
+
+define_machine(mvme5100) {
+	.name			= "MVME5100",
+	.probe			= mvme5100_probe,
+	.setup_arch		= mvme5100_setup_arch,
+	.init_IRQ		= mvme5100_pic_init,
+	.show_cpuinfo		= mvme5100_show_cpuinfo,
+	.get_irq		= mpic_get_irq,
+	.restart		= mvme5100_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};

arch/powerpc/sysdev/fsl_lbc.c

@@ -214,10 +214,14 @@ static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data)
 	struct fsl_lbc_ctrl *ctrl = data;
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	u32 status;
+	unsigned long flags;
 
+	spin_lock_irqsave(&fsl_lbc_lock, flags);
 	status = in_be32(&lbc->ltesr);
-	if (!status)
+	if (!status) {
+		spin_unlock_irqrestore(&fsl_lbc_lock, flags);
 		return IRQ_NONE;
+	}
 
 	out_be32(&lbc->ltesr, LTESR_CLEAR);
 	out_be32(&lbc->lteatr, 0);
@@ -260,6 +264,7 @@ static irqreturn_t fsl_lbc_ctrl_irq(int irqno, void *data)
 	if (status & ~LTESR_MASK)
 		dev_err(ctrl->dev, "Unknown error: "
 			"LTESR 0x%08X\n", status);
+	spin_unlock_irqrestore(&fsl_lbc_lock, flags);
 	return IRQ_HANDLED;
 }
 
@@ -298,8 +303,8 @@ static int fsl_lbc_ctrl_probe(struct platform_device *dev)
 		goto err;
 	}
 
-	fsl_lbc_ctrl_dev->irq = irq_of_parse_and_map(dev->dev.of_node, 0);
-	if (fsl_lbc_ctrl_dev->irq == NO_IRQ) {
+	fsl_lbc_ctrl_dev->irq[0] = irq_of_parse_and_map(dev->dev.of_node, 0);
+	if (!fsl_lbc_ctrl_dev->irq[0]) {
 		dev_err(&dev->dev, "failed to get irq resource\n");
 		ret = -ENODEV;
 		goto err;
@@ -311,20 +316,34 @@ static int fsl_lbc_ctrl_probe(struct platform_device *dev)
 	if (ret < 0)
 		goto err;
 
-	ret = request_irq(fsl_lbc_ctrl_dev->irq, fsl_lbc_ctrl_irq, 0,
+	ret = request_irq(fsl_lbc_ctrl_dev->irq[0], fsl_lbc_ctrl_irq, 0,
 				"fsl-lbc", fsl_lbc_ctrl_dev);
 	if (ret != 0) {
 		dev_err(&dev->dev, "failed to install irq (%d)\n",
-			fsl_lbc_ctrl_dev->irq);
-		ret = fsl_lbc_ctrl_dev->irq;
+			fsl_lbc_ctrl_dev->irq[0]);
+		ret = fsl_lbc_ctrl_dev->irq[0];
 		goto err;
 	}
 
+	fsl_lbc_ctrl_dev->irq[1] = irq_of_parse_and_map(dev->dev.of_node, 1);
+	if (fsl_lbc_ctrl_dev->irq[1]) {
+		ret = request_irq(fsl_lbc_ctrl_dev->irq[1], fsl_lbc_ctrl_irq,
+				IRQF_SHARED, "fsl-lbc-err", fsl_lbc_ctrl_dev);
+		if (ret) {
+			dev_err(&dev->dev, "failed to install irq (%d)\n",
+					fsl_lbc_ctrl_dev->irq[1]);
+			ret = fsl_lbc_ctrl_dev->irq[1];
+			goto err1;
+		}
+	}
+
 	/* Enable interrupts for any detected events */
 	out_be32(&fsl_lbc_ctrl_dev->regs->lteir, LTEIR_ENABLE);
 
 	return 0;
 
+err1:
+	free_irq(fsl_lbc_ctrl_dev->irq[0], fsl_lbc_ctrl_dev);
 err:
 	iounmap(fsl_lbc_ctrl_dev->regs);
 	kfree(fsl_lbc_ctrl_dev);

arch/powerpc/sysdev/fsl_pci.c

@@ -454,7 +454,7 @@ void fsl_pcibios_fixup_bus(struct pci_bus *bus)
 	}
 }
 
-int __init fsl_add_bridge(struct platform_device *pdev, int is_primary)
+int fsl_add_bridge(struct platform_device *pdev, int is_primary)
 {
 	int len;
 	struct pci_controller *hose;
@@ -1035,6 +1035,7 @@ static const struct of_device_id pci_ids[] = {
 	{ .compatible = "fsl,mpc8548-pcie", },
 	{ .compatible = "fsl,mpc8610-pci", },
 	{ .compatible = "fsl,mpc8641-pcie", },
+	{ .compatible = "fsl,qoriq-pcie", },
 	{ .compatible = "fsl,qoriq-pcie-v2.1", },
 	{ .compatible = "fsl,qoriq-pcie-v2.2", },
 	{ .compatible = "fsl,qoriq-pcie-v2.3", },

arch/powerpc/sysdev/indirect_pci.c

@@ -152,9 +152,7 @@ static struct pci_ops indirect_pci_ops =
 	.write = indirect_write_config,
 };
 
-void __init
-setup_indirect_pci(struct pci_controller* hose,
-		   resource_size_t cfg_addr,
+void setup_indirect_pci(struct pci_controller *hose, resource_size_t cfg_addr,
 			resource_size_t cfg_data, u32 flags)
 {
 	resource_size_t base = cfg_addr & PAGE_MASK;

arch/powerpc/sysdev/mpic_timer.c

@@ -41,6 +41,7 @@
 #define MPIC_TIMER_TCR_ROVR_OFFSET	24
 
 #define TIMER_STOP			0x80000000
+#define GTCCR_TOG			0x80000000
 #define TIMERS_PER_GROUP		4
 #define MAX_TICKS			(~0U >> 1)
 #define MAX_TICKS_CASCADE		(~0U)
@@ -96,6 +97,9 @@ static void convert_ticks_to_time(struct timer_group_priv *priv,
 	time->tv_sec = (__kernel_time_t)div_u64(ticks, priv->timerfreq);
 	tmp_sec = (u64)time->tv_sec * (u64)priv->timerfreq;
 
+	time->tv_usec = 0;
+
+	if (tmp_sec <= ticks)
 		time->tv_usec = (__kernel_suseconds_t)
 			div_u64((ticks - tmp_sec) * 1000000, priv->timerfreq);
 
@@ -327,11 +331,13 @@ void mpic_get_remain_time(struct mpic_timer *handle, struct timeval *time)
 	casc_priv = priv->timer[handle->num].cascade_handle;
 	if (casc_priv) {
 		tmp_ticks = in_be32(&priv->regs[handle->num].gtccr);
+		tmp_ticks &= ~GTCCR_TOG;
 		ticks = ((u64)tmp_ticks & UINT_MAX) * (u64)MAX_TICKS_CASCADE;
 		tmp_ticks = in_be32(&priv->regs[handle->num - 1].gtccr);
 		ticks += tmp_ticks;
 	} else {
 		ticks = in_be32(&priv->regs[handle->num].gtccr);
+		ticks &= ~GTCCR_TOG;
 	}
 
 	convert_ticks_to_time(priv, ticks, time);

drivers/tty/Kconfig

@@ -366,7 +366,7 @@ config TRACE_SINK
 	  "Trace data router for MIPI P1149.7 cJTAG standard".
 
 config PPC_EPAPR_HV_BYTECHAN
-	tristate "ePAPR hypervisor byte channel driver"
+	bool "ePAPR hypervisor byte channel driver"
 	depends on PPC
 	select EPAPR_PARAVIRT
 	help

include/linux/of_fdt.h

@@ -116,6 +116,7 @@ extern const void *of_flat_dt_match_machine(const void *default_match,
 extern void unflatten_device_tree(void);
 extern void unflatten_and_copy_device_tree(void);
 extern void early_init_devtree(void *);
+extern void early_get_first_memblock_info(void *, phys_addr_t *);
 #else /* CONFIG_OF_FLATTREE */
 static inline const char *of_flat_dt_get_machine_name(void) { return NULL; }
 static inline void unflatten_device_tree(void) {}

include/math-emu/op-common.h

@@ -685,7 +685,7 @@ do {									\
 	    else								\
 	      {									\
 		r = 0;								\
-		if (X##_s)							\
+		if (!X##_s)							\
 		  r = ~r;							\
 	      }									\
 	    FP_SET_EXCEPTION(FP_EX_INVALID);					\
@@ -743,12 +743,17 @@ do {									\
 	  }									\
 	else									\
 	  {									\
+	    int _lz0, _lz1;							\
 	    if (X##_e <= -_FP_WORKBITS - 1)					\
 	      _FP_FRAC_SET_##wc(X, _FP_MINFRAC_##wc);				\
 	    else								\
 	      _FP_FRAC_SRS_##wc(X, _FP_FRACBITS_##fs - 1 - X##_e,		\
 				_FP_WFRACBITS_##fs);				\
+	    _FP_FRAC_CLZ_##wc(_lz0, X);						\
 	    _FP_ROUND(wc, X);							\
+	    _FP_FRAC_CLZ_##wc(_lz1, X);						\
+	    if (_lz1 < _lz0)							\
+	      X##_e++; /* For overflow detection.  */				\
 	    _FP_FRAC_SRL_##wc(X, _FP_WORKBITS);					\
 	    _FP_FRAC_ASSEMBLE_##wc(r, X, rsize);				\
 	  }									\
@@ -762,7 +767,7 @@ do {									\
 	    if (!rsigned)							\
 	      {									\
 		r = 0;								\
-		if (X##_s)							\
+		if (!X##_s)							\
 		  r = ~r;							\
 	      }									\
 	    else if (rsigned != 2)						\