Commit fb3d47d4 authored by Jeff Kirsher's avatar Jeff Kirsher Committed by Jeff Garzik

[PATCH] e1000: Added PCIe bus information

This is two patches, the first is adding additional bus information for the 8257{1|2|3} controllers.  The second patch was orginally a community patch to print bus type/speed/width, and enhanced by us.
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: default avatarJohn Ronciak <john.ronciak@intel.com>
Signed-off-by: default avatarJeff Garzik <jgarzik@pobox.com>
parent a2917e22
...@@ -807,6 +807,26 @@ e1000_probe(struct pci_dev *pdev, ...@@ -807,6 +807,26 @@ e1000_probe(struct pci_dev *pdev,
if(eeprom_data & eeprom_apme_mask) if(eeprom_data & eeprom_apme_mask)
adapter->wol |= E1000_WUFC_MAG; adapter->wol |= E1000_WUFC_MAG;
/* print bus type/speed/width info */
{
struct e1000_hw *hw = &adapter->hw;
DPRINTK(PROBE, INFO, "(PCI%s:%s:%s) ",
((hw->bus_type == e1000_bus_type_pcix) ? "-X" :
(hw->bus_type == e1000_bus_type_pci_express ? " Express":"")),
((hw->bus_speed == e1000_bus_speed_2500) ? "2.5Gb/s" :
(hw->bus_speed == e1000_bus_speed_133) ? "133MHz" :
(hw->bus_speed == e1000_bus_speed_120) ? "120MHz" :
(hw->bus_speed == e1000_bus_speed_100) ? "100MHz" :
(hw->bus_speed == e1000_bus_speed_66) ? "66MHz" : "33MHz"),
((hw->bus_width == e1000_bus_width_64) ? "64-bit" :
(hw->bus_width == e1000_bus_width_pciex_4) ? "Width x4" :
(hw->bus_width == e1000_bus_width_pciex_1) ? "Width x1" :
"32-bit"));
}
for (i = 0; i < 6; i++)
printk("%2.2x%c", netdev->dev_addr[i], i == 5 ? '\n' : ':');
/* reset the hardware with the new settings */ /* reset the hardware with the new settings */
e1000_reset(adapter); e1000_reset(adapter);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment