Merge branch 'phy-broken-modes'

Jerome Brunet says:

====================
phy: Fix integration of eee-broken-modes

The purpose of this series is to fix the integration of the ethernet phy
property "eee-broken-modes" [0]

The v3 of this series has been merged, missing a fix (error reported by
kbuild robot) available in the v4 [1]

More importantly, Florian opposed adding a DT property mapping a device
register this directly [2]. The concern was that the property could be
abused to implement platform configuration policy. After discussing it,
I think we agreed that such information about the HW (defect) should appear
in the platform DT. However, the preferred way is to add a boolean property
for each EEE broken mode.

[0]: http://lkml.kernel.org/r/1480326409-25419-1-git-send-email-jbrunet@baylibre.com
[1]: http://lkml.kernel.org/r/1480348229-25672-1-git-send-email-jbrunet@baylibre.com
[2]: http://lkml.kernel.org/r/e14a3b0c-dc34-be14-48b3-518a0ad0c080@gmail.com
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/phy.txt

@@ -38,8 +38,14 @@ Optional Properties:
 - enet-phy-lane-swap: If set, indicates the PHY will swap the TX/RX lanes to
   compensate for the board being designed with the lanes swapped.
 
-- eee-broken-modes: Bits to clear in the MDIO_AN_EEE_ADV register to
-  disable EEE broken modes.
+- eee-broken-100tx:
+- eee-broken-1000t:
+- eee-broken-10gt:
+- eee-broken-1000kx:
+- eee-broken-10gkx4:
+- eee-broken-10gkr:
+  Mark the corresponding energy efficient ethernet mode as broken and
+  request the ethernet to stop advertising it.
 
 Example:
 

drivers/net/phy/phy_device.c

@@ -1187,8 +1187,8 @@ static int genphy_config_advert(struct phy_device *phydev)
  */
 static int genphy_config_eee_advert(struct phy_device *phydev)
 {
-	u32 broken = phydev->eee_broken_modes;
-	u32 old_adv, adv;
+	int broken = phydev->eee_broken_modes;
+	int old_adv, adv;
 
 	/* Nothing to disable */
 	if (!broken)
@@ -1665,7 +1665,7 @@ static void of_set_phy_supported(struct phy_device *phydev)
 static void of_set_phy_eee_broken(struct phy_device *phydev)
 {
 	struct device_node *node = phydev->mdio.dev.of_node;
-	u32 broken;
+	u32 broken = 0;
 
 	if (!IS_ENABLED(CONFIG_OF_MDIO))
 		return;
@@ -1673,7 +1673,19 @@ static void of_set_phy_eee_broken(struct phy_device *phydev)
 	if (!node)
 		return;
 
-	if (!of_property_read_u32(node, "eee-broken-modes", &broken))
+	if (of_property_read_bool(node, "eee-broken-100tx"))
+		broken |= MDIO_EEE_100TX;
+	if (of_property_read_bool(node, "eee-broken-1000t"))
+		broken |= MDIO_EEE_1000T;
+	if (of_property_read_bool(node, "eee-broken-10gt"))
+		broken |= MDIO_EEE_10GT;
+	if (of_property_read_bool(node, "eee-broken-1000kx"))
+		broken |= MDIO_EEE_1000KX;
+	if (of_property_read_bool(node, "eee-broken-10gkx4"))
+		broken |= MDIO_EEE_10GKX4;
+	if (of_property_read_bool(node, "eee-broken-10gkr"))
+		broken |= MDIO_EEE_10GKR;
+
 	phydev->eee_broken_modes = broken;
 }
 

include/dt-bindings/net/mdio.h

-/*
- * This header provides generic constants for ethernet MDIO bindings
- */
-
-#ifndef _DT_BINDINGS_NET_MDIO_H
-#define _DT_BINDINGS_NET_MDIO_H
-
-/*
- * EEE capability Advertisement
- */
-
-#define MDIO_EEE_100TX		0x0002	/* 100TX EEE cap */
-#define MDIO_EEE_1000T		0x0004	/* 1000T EEE cap */
-#define MDIO_EEE_10GT		0x0008	/* 10GT EEE cap */
-#define MDIO_EEE_1000KX		0x0010	/* 1000KX EEE cap */
-#define MDIO_EEE_10GKX4		0x0020	/* 10G KX4 EEE cap */
-#define MDIO_EEE_10GKR		0x0040	/* 10G KR EEE cap */
-
-#endif