Merge tag 'arm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into master

Pull ARM SoC DT fixes from Arnd Bergmann:
 "These are the latest device tree fixes for Arm SoCs:

   - TI Keystone2 ethernet regressed after a driver change broke with
     incorrect phy-mode in a board's DT source.

   - A similar fix is needed for two i.MX boards that were missed in an
     earlier bugfix.

   - DT change for Armada 38x allowing to add the register needed to fix
     NETA lockup when repeatedly switching speed.

   - One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card
     detect work correctly.

   - Two fixes for the Allwinner SoCs, one to relax the CMA allocation
     ranges that were failing on older SoCs and one to fix Cedrus on the
     H6"

* tag 'arm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: keystone-k2g-evm: fix rgmii phy-mode for ksz9031 phy
  ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds
  ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detect
  ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2
  ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2
  arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage
  ARM: dts sunxi: Relax a bit the CMA pool allocation range

Documentation/devicetree/bindings/media/allwinner,sun4i-a10-video-engine.yaml

@@ -47,6 +47,9 @@ properties:
     $ref: /schemas/types.yaml#/definitions/phandle-array
     description: Phandle to the device SRAM
 
+  iommus:
+    maxItems: 1
+
   memory-region:
     description:
       CMA pool to use for buffers allocation instead of the default

arch/arm/boot/dts/armada-38x.dtsi

@@ -342,7 +342,8 @@ gateclk: clock-gating-control@18220 {
 
 			comphy: phy@18300 {
 				compatible = "marvell,armada-380-comphy";
-				reg = <0x18300 0x100>;
+				reg-names = "comphy", "conf";
+				reg = <0x18300 0x100>, <0x18460 4>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 

arch/arm/boot/dts/imx6qdl-icore.dtsi

@@ -397,7 +397,7 @@ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
 
 	pinctrl_usbotg: usbotggrp {
 		fsl,pins = <
-			MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
 		>;
 	};
 
@@ -409,6 +409,7 @@ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17070
 			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17070
 			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17070
 			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17070
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01  0x1b0b0
 		>;
 	};
 

arch/arm/boot/dts/imx6sx-sabreauto.dts

@@ -99,7 +99,7 @@ ethphy1: ethernet-phy@1 {
 &fec2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy0>;
 	fsl,magic-packet;
 	status = "okay";

arch/arm/boot/dts/imx6sx-sdb.dtsi

@@ -213,7 +213,7 @@ ethphy2: ethernet-phy@2 {
 &fec2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2>;
-	phy-mode = "rgmii";
+	phy-mode = "rgmii-id";
 	phy-handle = <&ethphy2>;
 	status = "okay";
 };

arch/arm/boot/dts/keystone-k2g-evm.dts

@@ -402,7 +402,7 @@ ethphy0: ethernet-phy@0 {
 
 &gbe0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-id";
+	phy-mode = "rgmii-rxid";
 	status = "okay";
 };
 

arch/arm/boot/dts/sun4i-a10.dtsi

@@ -198,7 +198,7 @@ reserved-memory {
 		default-pool {
 			compatible = "shared-dma-pool";
 			size = <0x6000000>;
-			alloc-ranges = <0x4a000000 0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
 			reusable;
 			linux,cma-default;
 		};

arch/arm/boot/dts/sun5i.dtsi

@@ -117,7 +117,7 @@ reserved-memory {
 		default-pool {
 			compatible = "shared-dma-pool";
 			size = <0x6000000>;
-			alloc-ranges = <0x4a000000 0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
 			reusable;
 			linux,cma-default;
 		};

arch/arm/boot/dts/sun7i-a20.dtsi

@@ -181,7 +181,7 @@ reserved-memory {
 		default-pool {
 			compatible = "shared-dma-pool";
 			size = <0x6000000>;
-			alloc-ranges = <0x4a000000 0x6000000>;
+			alloc-ranges = <0x40000000 0x10000000>;
 			reusable;
 			linux,cma-default;
 		};

arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi

@@ -161,6 +161,7 @@ video-codec@1c0e000 {
 			resets = <&ccu RST_BUS_VE>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
 			allwinner,sram = <&ve_sram 1>;
+			iommus = <&iommu 3>;
 		};
 
 		gpu: gpu@1800000 {