Merge tag 'v4.14-rockchip-dts32-1' of...

Merge tag 'v4.14-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt

Pull "Rockchip dts32 changes for 4.14" from Heiko Stübner:

Removal of the deprectated num-slots property from all Rockchip dw-mmc
nodes. The rv1108 gains support for sd-cards on the evaluation board and
the general nodes get a bit of cosmetic. On rk3288 the evb gains support
saradc and the adc-key connected to it while some more boards also get
their mali gpu enabled (fennec, evb, tinker).

The biggest set of changes can be found on the rk3228/rk3229 combo this
time. It gets core support for efuse, sdmmc, sdio, io-domans and spdif
as well as a separate rk3229.dtsi that will keep the slight differences
between the two brothers rk3228/rk3229. The evaluation board also gets
some attention and abled nodes (regulators, io-domains, emmc, tsadc keys)

But I think the most interesting change is the cpu enable-method for it.
Instead of using the older in-kernel method, we're now also moving to
handling this in firmware via the psci interface on 32bit Rockchip socs.
In a recently merged pull request [0] support for the rk3228/rk3229 was
added to OP-TEE including the psci support and it seems supporting other
32bit Rockchip socs that way is also planned for the future.

[0] https://github.com/OP-TEE/optee_os/pull/1666

* tag 'v4.14-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (23 commits)
  ARM: dts: rockchip: fix property-ordering in rv1108 mmc nodes
  ARM: dts: rockchip: enable sdmmc for rv1108 evb
  ARM: dts: rockchip: add efuse device node for rk3228
  ARM: dts: rockchip: add gpio power-key for rk3229-evb
  ARM: dts: rockchip: enable tsadc for rk3229-evb
  ARM: dts: rockchip: enable eMMC for rk3229-evb
  ARM: dts: rockchip: enable io-domain for rk3229-evb
  ARM: dts: rockchip: add cpu-supply property for cpu node of rk3229-evb
  ARM: dts: rockchip: add regulator nodes for rk3229-evb
  ARM: dts: rockchip: add sdmmc and sdio nodes for rk3228 SoC
  ARM: dts: rockchip: fix compatible string for eMMC node of rk3228 SoC
  ARM: dts: rockchip: add cpu enable method for rk3228 SoC
  ARM: dts: rockchip: remove num-slots from all platforms
  ARM: dts: rockchip: Add io-domain node for rk3228
  ARM: dts: rockchip: add basic dtsi file for RK3229 SoC
  ARM: dts: rockchip: enable adc key for rk3288-evb
  ARM: dts: rockchip: enable saradc for rk3288-evb
  ARM: dts: rockchip: enable ARM Mali GPU on rk3288-fennec
  ARM: dts: rockchip: enable ARM Mali GPU on rk3288-evb
  ARM: dts: rockchip: enable ARM Mali GPU on rk3288-tinker
  ...

arch/arm/boot/dts/rk3036-kylin.dts

@@ -357,7 +357,6 @@ &sdio {
 	keep-power-in-suspend;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
 	sd-uhs-sdr12;
@@ -372,7 +371,6 @@ &sdmmc {
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	disable-wp;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
 };

arch/arm/boot/dts/rk3036.dtsi

@@ -287,7 +287,6 @@ emmc: dwmmc@1021c000 {
 		fifo-depth = <0x100>;
 		mmc-ddr-1_8v;
 		non-removable;
-		num-slots = <1>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
 		resets = <&cru SRST_EMMC>;
@@ -599,7 +598,7 @@ sdmmc_cmd: sdmmc-cmd {
 				rockchip,pins = <1 15 RK_FUNC_1 &pcfg_pull_default>;
 			};
 
-			sdmmc_cd: sdmcc-cd {
+			sdmmc_cd: sdmmc-cd {
 				rockchip,pins = <1 17 RK_FUNC_1 &pcfg_pull_default>;
 			};
 

arch/arm/boot/dts/rk3066a-bqcurie2.dts

@@ -190,7 +190,6 @@ vcc28_cif: regulator@12 {
 #include "tps65910.dtsi"
 
 &mmc0 { /* sdmmc */
-	num-slots = <1>;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
@@ -202,7 +201,6 @@ &mmc0 { /* sdmmc */
 };
 
 &mmc1 { /* wifi */
-	num-slots = <1>;
 	status = "okay";
 	non-removable;
 

arch/arm/boot/dts/rk3066a-mk808.dts

@@ -132,7 +132,6 @@ &mmc0 {
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
-	num-slots = <1>;
 	vmmc-supply = <&vcc_sd>;
 	status = "okay";
 };
@@ -141,7 +140,6 @@ &mmc1 {
 	bus-width = <4>;
 	disable-wp;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>;
 	pinctrl-names = "default";
 	vmmc-supply = <&vcc_wifi>;

arch/arm/boot/dts/rk3066a-rayeager.dts

@@ -185,7 +185,6 @@ &emmc {
 	cap-mmc-highspeed;
 	disable-wp;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
 	vmmc-supply = <&vcc_emmc>;
@@ -336,7 +335,6 @@ &i2c4 {
 &mmc0 {
 	bus-width = <4>;
 	disable-wp;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
 	vmmc-supply = <&vcc_sd>;
@@ -349,7 +347,6 @@ &mmc1 {
 	bus-width = <4>;
 	disable-wp;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
 	vmmc-supply = <&vccio_wl>;

arch/arm/boot/dts/rk3188-px3-evb.dts

@@ -89,7 +89,6 @@ &emmc {
 	cap-mmc-highspeed;
 	disable-wp;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
 	status = "okay";
@@ -256,7 +255,6 @@ gsl1680: touchscreen@40 {
 };
 
 &mmc0 {
-	num-slots = <1>;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;

arch/arm/boot/dts/rk3188-radxarock.dts

@@ -296,7 +296,6 @@ vcc28: REG12 {
 };
 
 &mmc0 {
-	num-slots = <1>;
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;

arch/arm/boot/dts/rk3229-evb.dts

@@ -40,7 +40,8 @@
 
 /dts-v1/;
 
-#include "rk322x.dtsi"
+#include <dt-bindings/input/input.h>
+#include "rk3229.dtsi"
 
 / {
 	model = "Rockchip RK3229 Evaluation board";
@@ -51,6 +52,15 @@ memory@60000000 {
 		reg = <0x60000000 0x40000000>;
 	};
 
+	dc_12v: dc-12v-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
 	ext_gmac: ext_gmac {
 		compatible = "fixed-clock";
 		clock-frequency = <125000000>;
@@ -67,6 +77,7 @@ vcc_host: vcc-host-regulator {
 		regulator-name = "vcc_host";
 		regulator-always-on;
 		regulator-boot-on;
+		vin-supply = <&vcc_sys>;
 	};
 
 	vcc_phy: vcc-phy-regulator {
@@ -77,9 +88,98 @@ vcc_phy: vcc-phy-regulator {
 		regulator-max-microvolt = <1800000>;
 		regulator-always-on;
 		regulator-boot-on;
+		vin-supply = <&vccio_1v8>;
+	};
+
+	vcc_sys: vcc-sys-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vccio_1v8: vccio-1v8-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vccio_3v3: vccio-3v3-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vccio_3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vcc_sys>;
+	};
+
+	vdd_arm: vdd-arm-regulator {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-name = "vdd_arm";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vdd_log: vdd-log-regulator {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 25000 1>;
+		pwm-supply = <&vcc_sys>;
+		regulator-name = "vdd_log";
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_key>;
+
+		power_key: power-key {
+			label = "GPIO Key Power";
+			gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <100>;
+			wakeup-source;
+		};
 	};
 };
 
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	cap-mmc-highspeed;
+	disable-wp;
+	non-removable;
+	status = "okay";
+};
+
 &gmac {
 	assigned-clocks = <&cru SCLK_MAC_EXTCLK>, <&cru SCLK_MAC>;
 	assigned-clock-parents = <&ext_gmac>, <&cru SCLK_MAC_EXTCLK>;
@@ -96,7 +196,21 @@ &gmac {
 	status = "okay";
 };
 
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vccio_3v3>;
+	vccio2-supply = <&vccio_1v8>;
+	vccio4-supply = <&vccio_3v3>;
+};
+
 &pinctrl {
+	keys {
+		pwr_key: pwr-key {
+			rockchip,pins = <3 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
 	usb {
 		host_vbus_drv: host-vbus-drv {
 			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -104,6 +218,19 @@ host_vbus_drv: host-vbus-drv {
 	};
 };
 
+&pwm1 {
+	status = "okay";
+};
+
+&pwm2 {
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };

arch/arm/boot/dts/rk3229.dtsi

+/*
+ * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *  Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "rk322x.dtsi"
+
+/ {
+	compatible = "rockchip,rk3229";
+
+	/delete-node/ opp-table0;
+
+	cpu0_opp_table: opp_table0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-408000000 {
+			opp-hz = /bits/ 64 <408000000>;
+			opp-microvolt = <950000>;
+			clock-latency-ns = <40000>;
+			opp-suspend;
+		};
+		opp-600000000 {
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <975000>;
+		};
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <1000000>;
+		};
+		opp-1008000000 {
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt = <1175000>;
+		};
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <1275000>;
+		};
+		opp-1296000000 {
+			opp-hz = /bits/ 64 <1296000000>;
+			opp-microvolt = <1325000>;
+		};
+		opp-1392000000 {
+			opp-hz = /bits/ 64 <1392000000>;
+			opp-microvolt = <1375000>;
+		};
+		opp-1464000000 {
+			opp-hz = /bits/ 64 <1464000000>;
+			opp-microvolt = <1400000>;
+		};
+	};
+};

arch/arm/boot/dts/rk322x.dtsi

@@ -70,6 +70,7 @@ cpu0: cpu@f00 {
 			#cooling-cells = <2>; /* min followed by max */
 			clock-latency = <40000>;
 			clocks = <&cru ARMCLK>;
+			enable-method = "psci";
 		};
 
 		cpu1: cpu@f01 {
@@ -78,6 +79,7 @@ cpu1: cpu@f01 {
 			reg = <0xf01>;
 			resets = <&cru SRST_CORE1>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			enable-method = "psci";
 		};
 
 		cpu2: cpu@f02 {
@@ -86,6 +88,7 @@ cpu2: cpu@f02 {
 			reg = <0xf02>;
 			resets = <&cru SRST_CORE2>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			enable-method = "psci";
 		};
 
 		cpu3: cpu@f03 {
@@ -94,6 +97,7 @@ cpu3: cpu@f03 {
 			reg = <0xf03>;
 			resets = <&cru SRST_CORE3>;
 			operating-points-v2 = <&cpu0_opp_table>;
+			enable-method = "psci";
 		};
 	};
 
@@ -151,6 +155,11 @@ arm-pmu {
 		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
 	};
 
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
 	timer {
 		compatible = "arm,armv7-timer";
 		arm,cpu-registers-not-fw-configured;
@@ -196,6 +205,19 @@ i2s0: i2s0@100c0000 {
 		status = "disabled";
 	};
 
+	spdif: spdif@100d0000 {
+		compatible = "rockchip,rk3228-spdif";
+		reg = <0x100d0000 0x1000>;
+		interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF_8CH>;
+		clock-names = "mclk", "hclk";
+		dmas = <&pdma 10>;
+		dma-names = "tx";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spdif_tx>;
+		status = "disabled";
+	};
+
 	i2s2: i2s2@100e0000 {
 		compatible = "rockchip,rk3228-i2s", "rockchip,rk3066-i2s";
 		reg = <0x100e0000 0x4000>;
@@ -215,6 +237,11 @@ grf: syscon@11000000 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 
+		io_domains: io-domains {
+			compatible = "rockchip,rk3228-io-voltage-domain";
+			status = "disabled";
+		};
+
 		u2phy0: usb2-phy@760 {
 			compatible = "rockchip,rk3228-usb2phy";
 			reg = <0x0760 0x0c>;
@@ -309,6 +336,23 @@ uart2: serial@11030000 {
 		status = "disabled";
 	};
 
+	efuse: efuse@11040000 {
+		compatible = "rockchip,rk3228-efuse";
+		reg = <0x11040000 0x20>;
+		clocks = <&cru PCLK_EFUSE_256>;
+		clock-names = "pclk_efuse";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		/* Data cells */
+		efuse_id: id@7 {
+			reg = <0x7 0x10>;
+		};
+		cpu_leakage: cpu_leakage@17 {
+			reg = <0x17 0x1>;
+		};
+	};
+
 	i2c0: i2c@11050000 {
 		compatible = "rockchip,rk3228-i2c";
 		reg = <0x11050000 0x1000>;
@@ -500,8 +544,34 @@ tsadc: tsadc@11150000 {
 		status = "disabled";
 	};
 
+	sdmmc: dwmmc@30000000 {
+		compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x30000000 0x4000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
+			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		fifo-depth = <0x100>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
+		status = "disabled";
+	};
+
+	sdio: dwmmc@30010000 {
+		compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
+		reg = <0x30010000 0x4000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
+			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
+		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
+		fifo-depth = <0x100>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdio_clk &sdio_cmd &sdio_bus4>;
+		status = "disabled";
+	};
+
 	emmc: dwmmc@30020000 {
-		compatible = "rockchip,rk3288-dw-mshc";
+		compatible = "rockchip,rk3228-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x30020000 0x4000>;
 		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 		clock-frequency = <37500000>;
@@ -511,7 +581,6 @@ emmc: dwmmc@30020000 {
 		clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
 		bus-width = <8>;
 		default-sample-phase = <158>;
-		num-slots = <1>;
 		fifo-depth = <0x100>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
@@ -710,6 +779,40 @@ pcfg_pull_none_drv_12ma: pcfg-pull-none-drv-12ma {
 			drive-strength = <12>;
 		};
 
+		sdmmc {
+			sdmmc_clk: sdmmc-clk {
+				rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none_drv_12ma>;
+			};
+
+			sdmmc_cmd: sdmmc-cmd {
+				rockchip,pins = <1 RK_PB7 1 &pcfg_pull_none_drv_12ma>;
+			};
+
+			sdmmc_bus4: sdmmc-bus4 {
+				rockchip,pins = <1 RK_PC2 1 &pcfg_pull_none_drv_12ma>,
+						<1 RK_PC3 1 &pcfg_pull_none_drv_12ma>,
+						<1 RK_PC4 1 &pcfg_pull_none_drv_12ma>,
+						<1 RK_PC5 1 &pcfg_pull_none_drv_12ma>;
+			};
+		};
+
+		sdio {
+			sdio_clk: sdio-clk {
+				rockchip,pins = <3 RK_PA0 1 &pcfg_pull_none_drv_12ma>;
+			};
+
+			sdio_cmd: sdio-cmd {
+				rockchip,pins = <3 RK_PA1 1 &pcfg_pull_none_drv_12ma>;
+			};
+
+			sdio_bus4: sdio-bus4 {
+				rockchip,pins = <3 RK_PA2 1 &pcfg_pull_none_drv_12ma>,
+						<3 RK_PA3 1 &pcfg_pull_none_drv_12ma>,
+						<3 RK_PA4 1 &pcfg_pull_none_drv_12ma>,
+						<3 RK_PA5 1 &pcfg_pull_none_drv_12ma>;
+			};
+		};
+
 		emmc {
 			emmc_clk: emmc-clk {
 				rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
@@ -835,6 +938,12 @@ pwm3_pin: pwm3-pin {
 			};
 		};
 
+		spdif {
+			spdif_tx: spdif-tx {
+				rockchip,pins = <3 31 RK_FUNC_2 &pcfg_pull_none>;
+			};
+		};
+
 		tsadc {
 			otp_gpio: otp-gpio {
 				rockchip,pins = <0 24 RK_FUNC_GPIO &pcfg_pull_none>;

arch/arm/boot/dts/rk3288-evb.dtsi

@@ -48,6 +48,43 @@ memory@0 {
 		reg = <0x0 0x80000000>;
 	};
 
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+
+		button-up {
+			label = "Volume Up";
+			linux,code = <KEY_VOLUMEUP>;
+			press-threshold-microvolt = <100000>;
+		};
+
+		button-down {
+			label = "Volume Down";
+			linux,code = <KEY_VOLUMEDOWN>;
+			press-threshold-microvolt = <300000>;
+		};
+
+		menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			press-threshold-microvolt = <640000>;
+		};
+
+		esc {
+			label = "Esc";
+			linux,code = <KEY_ESC>;
+			press-threshold-microvolt = <1000000>;
+		};
+
+		home  {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			press-threshold-microvolt = <1300000>;
+		};
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		brightness-levels = <
@@ -212,19 +249,22 @@ &emmc {
 	cap-mmc-highspeed;
 	disable-wp;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
 	status = "okay";
 };
 
+&saradc {
+	vref-supply = <&vcc_18>;
+	status = "okay";
+};
+
 &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	disable-wp;			/* wp not hooked up */
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	status = "okay";
@@ -248,6 +288,11 @@ &gmac {
 	status = "ok";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
 &hdmi {
 	ddc-i2c-bus = <&i2c5>;
 	status = "okay";

arch/arm/boot/dts/rk3288-fennec.dts

@@ -77,7 +77,6 @@ &emmc {
 	cap-mmc-highspeed;
 	disable-wp;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
 	status = "okay";
@@ -99,6 +98,11 @@ &gmac {
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
 &hdmi {
 	status = "okay";
 };

arch/arm/boot/dts/rk3288-firefly-reload-core.dtsi

@@ -78,7 +78,6 @@ &emmc {
 	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
 	vmmc-supply = <&vcc_io>;

arch/arm/boot/dts/rk3288-firefly-reload.dts

@@ -269,7 +269,6 @@ &sdmmc {
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	disable-wp;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
 	vmmc-supply = <&vcc_sd>;
@@ -284,7 +283,6 @@ &sdio0 {
 	disable-wp;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>, <&sdio0_int>;
 	sd-uhs-sdr12;

arch/arm/boot/dts/rk3288-firefly.dtsi

@@ -208,7 +208,6 @@ &emmc {
 	cap-mmc-highspeed;
 	disable-wp;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
 	vmmc-supply = <&vcc_io>;
@@ -527,7 +526,6 @@ &sdio0 {
 	bus-width = <4>;
 	disable-wp;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4>, <&sdio0_cmd>, <&sdio0_clk>;
 	vmmc-supply = <&vbat_wl>;
@@ -541,7 +539,6 @@ &sdmmc {
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	disable-wp;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
 	vmmc-supply = <&vcc_sd>;

arch/arm/boot/dts/rk3288-miqi.dts

@@ -126,7 +126,6 @@ &emmc {
 	cap-mmc-highspeed;
 	disable-wp;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_pwr>, <&emmc_bus8>;
 	vmmc-supply = <&vcc_io>;
@@ -404,7 +403,6 @@ &sdmmc {
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	disable-wp;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk>, <&sdmmc_cmd>, <&sdmmc_cd>, <&sdmmc_bus4>;
 	vmmc-supply = <&vcc_sd>;

arch/arm/boot/dts/rk3288-phycore-rdk.dts

@@ -263,7 +263,6 @@ &sdmmc {
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	disable-wp;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	vmmc-supply = <&vdd_io_sd>;

arch/arm/boot/dts/rk3288-phycore-som.dtsi

@@ -136,7 +136,6 @@ &emmc {
 	cap-mmc-highspeed;
 	disable-wp;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
 	vmmc-supply = <&vdd_3v3_io>;

arch/arm/boot/dts/rk3288-popmetal.dts

@@ -150,7 +150,6 @@ &emmc {
 	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_pwr &emmc_bus8>;
 	vmmc-supply = <&vcc_io>;
@@ -164,7 +163,6 @@ &sdmmc {
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	disable-wp;                     /* wp not hooked up */
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	sd-uhs-sdr12;

arch/arm/boot/dts/rk3288-r89.dts

@@ -354,7 +354,6 @@ &sdmmc {
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	disable-wp;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	vmmc-supply = <&vcc_sdmmc>;

arch/arm/boot/dts/rk3288-rock2-som.dtsi

@@ -89,7 +89,6 @@ &emmc {
 	cap-mmc-highspeed;
 	disable-wp;
 	non-removable;
-	num-slots = <1>;
 	mmc-pwrseq = <&emmc_pwrseq>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;

arch/arm/boot/dts/rk3288-rock2-square.dts

@@ -147,7 +147,6 @@ &sdio0 {
 	disable-wp;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk &sdio0_int>;
 	vmmc-supply = <&vcc_io>;
@@ -161,7 +160,6 @@ &sdmmc {
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	disable-wp;	/* wp not hooked up */
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	vmmc-supply = <&vcc_sd>;

arch/arm/boot/dts/rk3288-tinker.dts

@@ -156,6 +156,11 @@ &gmac {
 	status = "ok";
 };
 
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
 &hdmi {
 	ddc-i2c-bus = <&i2c5>;
 	status = "okay";
@@ -465,7 +470,6 @@ &sdmmc {
 	cap-sd-highspeed;
 	card-detect-delay = <200>;
 	disable-wp;			/* wp not hooked up */
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 	status = "okay";

arch/arm/boot/dts/rk3288-veyron-sdmmc.dtsi

@@ -117,7 +117,6 @@ &sdmmc {
 	card-detect-delay = <200>;
 	cd-gpios = <&gpio7 RK_PA5 GPIO_ACTIVE_LOW>;
 	rockchip,default-sample-phase = <90>;
-	num-slots = <1>;
 	sd-uhs-sdr12;
 	sd-uhs-sdr25;
 	sd-uhs-sdr50;

arch/arm/boot/dts/rk3288-veyron.dtsi

@@ -156,7 +156,6 @@ &emmc {
 	mmc-hs200-1_8v;
 	mmc-pwrseq = <&emmc_pwrseq>;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
 };
@@ -372,7 +371,6 @@ &sdio0 {
 	keep-power-in-suspend;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	non-removable;
-	num-slots = <1>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_clk &sdio0_cmd &sdio0_bus4>;
 	sd-uhs-sdr12;

arch/arm/boot/dts/rv1108-evb.dts

@@ -56,6 +56,10 @@ chosen {
 	};
 };
 
+&sdmmc {
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };

arch/arm/boot/dts/rv1108.dtsi

@@ -174,37 +174,39 @@ cru: clock-controller@20200000 {
 
 	emmc: dwmmc@30110000 {
 		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
-		clock-freq-min-max = <400000 150000000>;
+		reg = <0x30110000 0x4000>;
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
 			 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
-		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-		reg = <0x30110000 0x4000>;
+		max-frequency = <150000000>;
 		status = "disabled";
 	};
 
 	sdio: dwmmc@30120000 {
 		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
-		clock-freq-min-max = <400000 150000000>;
+		reg = <0x30120000 0x4000>;
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>,
 			 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
-		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-		reg = <0x30120000 0x4000>;
+		max-frequency = <150000000>;
 		status = "disabled";
 	};
 
 	sdmmc: dwmmc@30130000 {
 		compatible = "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc";
-		clock-freq-min-max = <400000 100000000>;
+		reg = <0x30130000 0x4000>;
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>,
 			 <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>;
 		clock-names = "biu", "ciu", "ciu-drive", "ciu-sample";
 		fifo-depth = <0x100>;
-		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-		reg = <0x30130000 0x4000>;
+		max-frequency = <100000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
 		status = "disabled";
 	};