Merge samba.org:/scratch/anton/linux-2.5

into samba.org:/scratch/anton/tmp3

MAINTAINERS

@@ -207,6 +207,7 @@ S:	Maintained
 AGPGART DRIVER
 P:	Dave Jones
 M:	davej@codemonkey.org.uk
+W:	http://www.codemonkey.org.uk/agp/
 S:	Maintained
 
 AHA152X SCSI DRIVER
@@ -771,27 +772,24 @@ M:	jes@trained-monkey.org
 L:	linux-hippi@sunsite.dk
 S:	Maintained
 
-HP (was COMPAQ) FIBRE CHANNEL 64-bit/66MHz PCI non-intelligent HBA
-P:	Stephen Cameron
-M:	arrays@hp.com 
-M:	steve.cameron@hp.com
-L:	cpqfc-discuss@lists.sourceforge.net
-S:	Odd Fixes
-
-HP (was COMPAQ) SMART2 RAID DRIVER
-P:	Stephen Cameron
-M:	arrays@hp.com
-M:	steve.cameron@hp.com
-L:	cpqarray-discuss@lists.sourceforge.net
-S:	Odd Fixes
-
-HP (was COMPAQ) SMART CISS RAID DRIVER
-P:	Stephen Cameron
-M:	arrays@hp.com
-M:	steve.cameron@hp.com
-L:	cciss-discuss@lists.sourceforge.net
+COMPAQ FIBRE CHANNEL 64-bit/66MHz PCI non-intelligent HBA
+P:	Chase Maupin
+M:	Chase Maupin (support@compaq.com)
+L:	compaqandlinux@cpqlin.van-dijk.net
 S:	Supported
 
+COMPAQ SMART2 RAID DRIVER
+P:	Francis Wiran
+M:	Francis Wiran <support@compaq.com>
+L:	compaqandlinux@cpqlin.van-dijk.net
+S:	Supported	
+
+COMPAQ SMART CISS RAID DRIVER 
+P:	Mike Miller, Michael Ni
+M:	Mike Miller, Michael Ni <support@compaq.com>
+L:	compaqandlinux@cpqlin.van-dijk.net
+S:	Supported 
+  
 HP100:	Driver for HP 10/100 Mbit/s Voice Grade Network Adapter Series
 P:	Jaroslav Kysela
 M:	perex@suse.cz

arch/alpha/Kconfig

@@ -297,7 +297,7 @@ config PCI
 
 config PCI_DOMAINS
 	bool
-	default PCI
+	default y
 
 config ALPHA_CORE_AGP
 	bool

arch/arm/Kconfig

@@ -377,6 +377,15 @@ config ARM_THUMB
 
 	  If you don't know what this all is, saying Y is a safe choice.
 
+config CPU_BIG_ENDIAN
+	bool "Build big-endian kernel"
+	depends on ARCH_SUPPORTS_BIG_ENDIAN
+	help
+	  Say Y if you plan on running a kernel in big-endian mode.
+	  Note that your board must be properly built and your board
+	  port must properly enable and big-endian related features
+	  of your chipset/board/processor.
+
 config CPU_ICACHE_DISABLE
 	bool "Disable I-Cache"
 	depends on CPU_ARM920T || CPU_ARM922T || CPU_ARM926T || CPU_ARM1020

arch/arm/Makefile

@@ -24,6 +24,12 @@ ifeq ($(CONFIG_DEBUG_INFO),y)
 CFLAGS		+=-g
 endif
 
+ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
+CFLAGS		+= -mbig-endian
+AS		+= -EB
+LD		+= -EB
+endif
+
 # Select CPU dependent flags.  Note that order of declaration is important;
 # the options further down the list override previous items.
 #
@@ -34,10 +40,7 @@ apcs-$(CONFIG_CPU_26)		:=-mapcs-26 -mcpu=arm3
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-#
-# Note - GCC does accept -march=armv5te, but someone messed up the assembler or the
-# gcc specs file - this needs fixing properly - ie in gcc and/or binutils.
-arch-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5 -march=armv5t
+arch-$(CONFIG_CPU_32v5)		:=-D__LINUX_ARM_ARCH__=5 -march=armv5te
 arch-$(CONFIG_CPU_32v4)		:=-D__LINUX_ARM_ARCH__=4 -march=armv4
 arch-$(CONFIG_CPU_32v3)		:=-D__LINUX_ARM_ARCH__=3 -march=armv3
 
@@ -50,13 +53,13 @@ tune-$(CONFIG_CPU_ARM922T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_ARM926T)	:=-mtune=arm9tdmi
 tune-$(CONFIG_CPU_SA110)	:=-mtune=strongarm110
 tune-$(CONFIG_CPU_SA1100)	:=-mtune=strongarm1100
-tune-$(CONFIG_CPU_XSCALE)	:=-mtune=strongarm -Wa,-mxscale #-mtune=xscale
+tune-$(CONFIG_CPU_XSCALE)	:=-mtune=xscale
 
 # Force -mno-fpu to be passed to the assembler.  Some versions of gcc don't
 # do this with -msoft-float
 CFLAGS_BOOT	:=$(apcs-y) $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Wa,-mno-fpu -Uarm
 CFLAGS		+=$(apcs-y) $(arch-y) $(tune-y) -mshort-load-bytes -msoft-float -Wa,-mno-fpu -Uarm
-AFLAGS		+=$(apcs-y) $(arch-y) $(tune-y) -mno-fpu -msoft-float -Wa,-mno-fpu
+AFLAGS		+=$(apcs-y) $(arch-y) $(tune-y) -msoft-float -Wa,-mno-fpu
 
 #Default value
 DATAADDR	:= .
@@ -76,7 +79,11 @@ endif
 ifeq ($(CONFIG_CPU_32),y)
 PROCESSOR	:= armv
 head-y		:= arch/arm/kernel/head.o arch/arm/kernel/init_task.o
-LDFLAGS_BLOB	+= --oformat elf32-littlearm
+  ifeq ($(CONFIG_CPU_BIG_ENDIAN),y)
+    LDFLAGS_BLOB	+= --oformat elf32-bigarm
+  else
+    LDFLAGS_BLOB	+= --oformat elf32-littlearm
+  endif
 textaddr-y	:= 0xC0008000
 endif
 

arch/arm/lib/div64.S

 #include <linux/linkage.h>
 
+#ifndef __ARMEB__
 ql	.req	r0			@ quotient low
 qh	.req	r1			@ quotient high
-dl	.req	r3			@ divisor low
-dh	.req	r2			@ divisor high
+onl	.req	r0			@ original dividend low
+onh	.req	r1			@ original dividend high
 nl	.req	r4			@ dividend low
 nh	.req	r5			@ dividend high
+res	.req	r4			@ result
+#else
+ql	.req	r1
+qh	.req	r0
+onl	.req	r1
+onh	.req	r0
+nl	.req	r5
+nh	.req	r4
+res	.req	r5
+#endif
+
+dl	.req	r3			@ divisor low
+dh	.req	r2			@ divsor high
+
 
 ENTRY(do_div64)
 	stmfd	sp!, {r4, r5, lr}
-	mov	nl, r0
-	movs	nh, r1			@ if high bits are zero
+	mov	nl, onl
+	movs	nh, onh			@ if high bits are zero
 	movne	lr, #33
 	moveq	lr, #1			@ only divide low bits
-	moveq	nh, r0
+	moveq	nh, onl
 
 1:	cmp	nh, dh
 	bls	2f
 	add	lr, lr, #1
-	movs	dh, dh, lsl #1		@ left justify divisor
+	movs	dh, dh, lsl #1		@ left justify disor
 	bpl	1b
 
-2:	movs	nh, r1
+2:	movs	nh, onh
 	moveq	dl, dh
 	moveq	dh, #0
 	movne	dl, #0
@@ -38,5 +53,5 @@ ENTRY(do_div64)
 	subs	lr, lr, #1
 	bne	3b
 
-	mov	r2, nl
+	mov	r2, res
 	ldmfd	sp!, {r4, r5, pc}

arch/arm/mach-sa1100/irq.c

@@ -13,7 +13,7 @@
 #include <linux/module.h>
 #include <linux/ioport.h>
 #include <linux/ptrace.h>
-#include <linux/device.h>
+#include <linux/sysdev.h>
 
 #include <asm/hardware.h>
 #include <asm/irq.h>
@@ -211,94 +211,73 @@ static struct resource irq_resource = {
 	.end	= 0x9005ffff,
 };
 
-struct sa1100irq_state {
+static struct {
 	unsigned int	saved;
 	unsigned int	icmr;
 	unsigned int	iclr;
 	unsigned int	iccr;
-};
+} sa1100irq_state;
 
 static int sa1100irq_suspend(struct device *dev, u32 state, u32 level)
 {
-	struct sa1100irq_state *st;
-
-	if (!dev->saved_state && level == SUSPEND_NOTIFY)
-		dev->saved_state = kmalloc(sizeof(struct sa1100irq_state),
-					   GFP_KERNEL);
-	if (!dev->saved_state)
-		return -ENOMEM;
-
-	if (level == SUSPEND_POWER_DOWN) {
-		st = (struct sa1100irq_state *)dev->saved_state;
+	struct sa1100irq_state *st = &sa1100irq_state;
 
-		st->saved = 1;
-		st->icmr = ICMR;
-		st->iclr = ICLR;
-		st->iccr = ICCR;
+	st->saved = 1;
+	st->icmr = ICMR;
+	st->iclr = ICLR;
+	st->iccr = ICCR;
 
-		/*
-		 * Disable all GPIO-based interrupts.
-		 */
-		ICMR &= ~(IC_GPIO11_27|IC_GPIO10|IC_GPIO9|IC_GPIO8|IC_GPIO7|
-			  IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2|
-			  IC_GPIO1|IC_GPIO0);
+	/*
+	 * Disable all GPIO-based interrupts.
+	 */
+	ICMR &= ~(IC_GPIO11_27|IC_GPIO10|IC_GPIO9|IC_GPIO8|IC_GPIO7|
+		  IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2|
+		  IC_GPIO1|IC_GPIO0);
 
-		/*
-		 * Set the appropriate edges for wakeup.
-		 */
-		GRER = PWER & GPIO_IRQ_rising_edge;
-		GFER = PWER & GPIO_IRQ_falling_edge;
+	/*
+	 * Set the appropriate edges for wakeup.
+	 */
+	GRER = PWER & GPIO_IRQ_rising_edge;
+	GFER = PWER & GPIO_IRQ_falling_edge;
+	
+	/*
+	 * Clear any pending GPIO interrupts.
+	 */
+	GEDR = GEDR;
 
-		/*
-		 * Clear any pending GPIO interrupts.
-		 */
-		GEDR = GEDR;
-	}
 	return 0;
 }
 
-static int sa1100irq_resume(struct device *dev, u32 level)
+static int sa1100irq_resume(struct sys_device *dev)
 {
-	struct sa1100irq_state *st;
-
-	if (level == RESUME_POWER_ON) {
-		st = (struct sa1100irq_state *)dev->saved_state;
-		dev->saved_state = NULL;
-
-		if (st->saved) {
-			ICCR = st->iccr;
-			ICLR = st->iclr;
+	struct sa1100irq_state *st = &sa1100irq_state;
 
-			GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
-			GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
+	if (st->saved) {
+		ICCR = st->iccr;
+		ICLR = st->iclr;
 
-			ICMR = st->icmr;
-		}
+		GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
+		GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
 
-		kfree(st);
+		ICMR = st->icmr;
 	}
 	return 0;
 }
 
-static struct device_driver sa1100irq_driver = {
-	.name		= "sa11x0-irq",
-	.bus		= &system_bus_type,
+static struct sysdev_class sa1100irq_sysclass = {
+	set_kset_name("sa11x0-irq"),
 	.suspend	= sa1100irq_suspend,
 	.resume		= sa1100irq_resume,
 };
 
 static struct sys_device sa1100irq_device = {
-	.name		= "irq",
 	.id		= 0,
-	.dev = {
-		.name	= "Intel SA11x0 [Interrupt Controller]",
-		.driver	= &sa1100irq_driver,
-	},
+	.cls		= &sa1100irq_sysclass,
 };
 
 static int __init sa1100irq_init_devicefs(void)
 {
-	driver_register(&sa1100irq_driver);
+	sysdev_class_register(&sa1100irq_sysclass);
 	return sys_device_register(&sa1100irq_device);
 }
 

arch/i386/kernel/cpu/cpufreq/powernow-k7.c

@@ -10,6 +10,7 @@
  *
  * Errata 5: Processor may fail to execute a FID/VID change in presence of interrupt.
  * - We cli/sti on stepping A0 CPUs around the FID/VID transition.
+ * (ADDENDUM: This seems to be needed on more systems, so we do it unconditionally now).
  * Errata 15: Processors with half frequency multipliers may hang upon wakeup from disconnect.
  * - We disable half multipliers if ACPI is used on A0 stepping CPUs.
  */
@@ -259,8 +260,7 @@ static void change_speed (unsigned int index)
 
 	/* Now do the magic poking into the MSRs.  */
 
-	if (have_a0 == 1)	/* A0 errata 5 */
-		__asm__("\tcli\n");
+	__asm__("\tcli\n");
 
 	if (freqs.old > freqs.new) {
 		/* Going down, so change FID first */
@@ -272,9 +272,7 @@ static void change_speed (unsigned int index)
 		change_FID(vid);
 	}
 	
-
-	if (have_a0 == 1)
-		__asm__("\tsti\n");
+	__asm__("\tsti\n");
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 }

arch/i386/kernel/io_apic.c

@@ -1160,7 +1160,8 @@ void __init setup_IO_APIC_irqs(void)
 		entry.delivery_mode = INT_DELIVERY_MODE;
 		entry.dest_mode = INT_DEST_MODE;
 		entry.mask = 0;				/* enable IRQ */
-		entry.dest.logical.logical_dest = TARGET_CPUS;
+		entry.dest.logical.logical_dest = 
+					cpu_mask_to_apicid(TARGET_CPUS);
 
 		idx = find_irq_entry(apic,pin,mp_INT);
 		if (idx == -1) {
@@ -1239,7 +1240,7 @@ void __init setup_ExtINT_IRQ0_pin(unsigned int pin, int vector)
 	 */
 	entry.dest_mode = INT_DEST_MODE;
 	entry.mask = 0;					/* unmask IRQ now */
-	entry.dest.logical.logical_dest = TARGET_CPUS;
+	entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
 	entry.delivery_mode = INT_DELIVERY_MODE;
 	entry.polarity = 0;
 	entry.trigger = 0;
@@ -2309,7 +2310,7 @@ int io_apic_set_pci_routing (int ioapic, int pin, int irq)
 
 	entry.delivery_mode = INT_DELIVERY_MODE;
 	entry.dest_mode = INT_DEST_MODE;
-	entry.dest.logical.logical_dest = TARGET_CPUS;
+	entry.dest.logical.logical_dest = cpu_mask_to_apicid(TARGET_CPUS);
 	entry.mask = 1;					 /* Disabled (masked) */
 	entry.trigger = 1;				   /* Level sensitive */
 	entry.polarity = 1;					/* Low active */

arch/i386/mm/discontig.c

@@ -114,10 +114,16 @@ void __init get_memcfg_numa_flat(void)
  */
 static void __init find_max_pfn_node(int nid)
 {
-	if (node_start_pfn[nid] >= node_end_pfn[nid])
-		BUG();
 	if (node_end_pfn[nid] > max_pfn)
 		node_end_pfn[nid] = max_pfn;
+	/*
+	 * if a user has given mem=XXXX, then we need to make sure 
+	 * that the node _starts_ before that, too, not just ends
+	 */
+	if (node_start_pfn[nid] > max_pfn)
+		node_start_pfn[nid] = max_pfn;
+	if (node_start_pfn[nid] > node_end_pfn[nid])
+		BUG();
 }
 
 /* 

drivers/acpi/acpi_ksyms.c

@@ -144,8 +144,8 @@ EXPORT_SYMBOL(acpi_bus_unregister_driver);
 #include <linux/pci.h>
 extern int acpi_pci_irq_enable(struct pci_dev *dev);
 EXPORT_SYMBOL(acpi_pci_irq_enable);
-extern int acpi_pci_irq_lookup (int segment, int bus, int device, int pin);
-EXPORT_SYMBOL(acpi_pci_irq_lookup);
+EXPORT_SYMBOL(acpi_pci_register_driver);
+EXPORT_SYMBOL(acpi_pci_unregister_driver);
 #endif /*CONFIG_ACPI_PCI */
 
 #ifdef CONFIG_ACPI_EC

drivers/acpi/osl.c

@@ -38,6 +38,7 @@
 #include <acpi/acpi.h>
 #include <asm/io.h>
 #include <acpi/acpi_bus.h>
+#include <asm/uaccess.h>
 
 #ifdef CONFIG_ACPI_EFI
 #include <linux/efi.h>
@@ -948,19 +949,22 @@ acpi_os_get_line(char *buffer)
 	return 0;
 }
 
-/*
- * We just have to assume we're dealing with valid memory
- */
-
+/* Assumes no unreadable holes inbetween */
 BOOLEAN
 acpi_os_readable(void *ptr, u32 len)
 {
+#if defined(__i386__) || defined(__x86_64__) 
+	char tmp;
+	return !__get_user(tmp, (char *)ptr) && !__get_user(tmp, (char *)ptr + len - 1);
+#endif
 	return 1;
 }
 
 BOOLEAN
 acpi_os_writable(void *ptr, u32 len)
 {
+	/* could do dummy write (racy) or a kernel page table lookup.
+	   The later may be difficult at early boot when kmap doesn't work yet. */
 	return 1;
 }
 

drivers/acpi/pci_irq.c

@@ -229,22 +229,20 @@ acpi_pci_irq_add_prt (
                           PCI Interrupt Routing Support
    -------------------------------------------------------------------------- */
 
-int
-acpi_pci_irq_lookup (
-	int			segment,
-	int			bus,
-	int			device,
-	int			pin)
+static int
+acpi_pci_irq_lookup (struct pci_bus *bus, int device, int pin)
 {
 	struct acpi_prt_entry	*entry = NULL;
+	int segment = pci_domain_nr(bus);
+	int bus_nr = bus->number;
 
 	ACPI_FUNCTION_TRACE("acpi_pci_irq_lookup");
 
 	ACPI_DEBUG_PRINT((ACPI_DB_INFO, 
 		"Searching for PRT entry for %02x:%02x:%02x[%c]\n", 
-		segment, bus, device, ('A' + pin)));
+		segment, bus_nr, device, ('A' + pin)));
 
-	entry = acpi_pci_irq_find_prt_entry(segment, bus, device, pin); 
+	entry = acpi_pci_irq_find_prt_entry(segment, bus_nr, device, pin); 
 	if (!entry) {
 		ACPI_DEBUG_PRINT((ACPI_DB_INFO, "PRT entry not found\n"));
 		return_VALUE(0);
@@ -288,7 +286,8 @@ acpi_pci_irq_derive (
 	while (!irq && bridge->bus->self) {
 		pin = (pin + PCI_SLOT(bridge->devfn)) % 4;
 		bridge = bridge->bus->self;
-		irq = acpi_pci_irq_lookup(0, bridge->bus->number, PCI_SLOT(bridge->devfn), pin);
+		irq = acpi_pci_irq_lookup(bridge->bus,
+				PCI_SLOT(bridge->devfn), pin);
 	}
 
 	if (!irq) {
@@ -331,7 +330,7 @@ acpi_pci_irq_enable (
 	 * First we check the PCI IRQ routing table (PRT) for an IRQ.  PRT
 	 * values override any BIOS-assigned IRQs set during boot.
 	 */
- 	irq = acpi_pci_irq_lookup(0, dev->bus->number, PCI_SLOT(dev->devfn), pin);
+ 	irq = acpi_pci_irq_lookup(dev->bus, PCI_SLOT(dev->devfn), pin);
  
 	/*
 	 * If no PRT entry was found, we'll try to derive an IRQ from the

drivers/acpi/pci_root.c

@@ -59,17 +59,63 @@ static struct acpi_driver acpi_pci_root_driver = {
 			},
 };
 
- struct acpi_pci_root {
+struct acpi_pci_root {
 	struct list_head	node;
- 	acpi_handle		handle;
- 	struct acpi_pci_id	id;
- 	struct pci_bus		*bus;
+	acpi_handle		handle;
+	struct acpi_pci_id	id;
+	struct pci_bus		*bus;
 	u64			mem_tra;
 	u64			io_tra;
- };
+};
 
 struct list_head		acpi_pci_roots;
 
+static struct acpi_pci_driver *sub_driver;
+
+int acpi_pci_register_driver(struct acpi_pci_driver *driver)
+{
+	int n = 0;
+	struct list_head *entry;
+
+	struct acpi_pci_driver **pptr = &sub_driver;
+	while (*pptr)
+		pptr = &(*pptr)->next;
+	*pptr = driver;
+
+	if (!driver->add)
+		return 0;
+
+	list_for_each(entry, &acpi_pci_roots) {
+		struct acpi_pci_root *root;
+		root = list_entry(entry, struct acpi_pci_root, node);
+		driver->add(root->handle);
+		n++;
+	}
+
+	return n;
+}
+
+void acpi_pci_unregister_driver(struct acpi_pci_driver *driver)
+{
+	struct list_head *entry;
+
+	struct acpi_pci_driver **pptr = &sub_driver;
+	while (*pptr) {
+		if (*pptr != driver)
+			continue;
+		*pptr = (*pptr)->next;
+		break;
+	}
+
+	if (!driver->remove)
+		return;
+
+	list_for_each(entry, &acpi_pci_roots) {
+		struct acpi_pci_root *root;
+		root = list_entry(entry, struct acpi_pci_root, node);
+		driver->remove(root->handle);
+	}
+}
 
 void
 acpi_pci_get_translations (

drivers/acpi/sleep/main.c

@@ -214,6 +214,10 @@ acpi_suspend (
 {
 	acpi_status status;
 
+	/* Suspend is hard to get right on SMP. */
+	if (num_online_cpus() != 1)
+		return AE_ERROR;
+
 	/* get out if state is invalid */
 	if (state < ACPI_STATE_S1 || state > ACPI_STATE_S5)
 		return AE_ERROR;
@@ -226,7 +230,10 @@ acpi_suspend (
 	 * TBD: S1 can be done without device_suspend.  Make a CONFIG_XX
 	 * to handle however when S1 failed without device_suspend.
 	 */
-	freeze_processes();		/* device_suspend needs processes to be stopped */
+	if (freeze_processes()) {
+		thaw_processes();
+		return AE_ERROR;		/* device_suspend needs processes to be stopped */
+	}
 
 	/* do we have a wakeup address for S2 and S3? */
 	/* Here, we support only S4BIOS, those we set the wakeup address */

drivers/acpi/tables.c

@@ -56,7 +56,7 @@ static char *acpi_table_signatures[ACPI_TABLE_COUNT] = {
 	[ACPI_SRAT]		= "SRAT",
 	[ACPI_SSDT]		= "SSDT",
 	[ACPI_SPMI]		= "SPMI",
-	[ACPI_HPET]		= "HPET"
+	[ACPI_HPET]		= "HPET",
 };
 
 /* System Description Table (RSDT/XSDT) */

drivers/acpi/thermal.c

@@ -430,7 +430,7 @@ acpi_thermal_call_usermode (
 	ACPI_FUNCTION_TRACE("acpi_thermal_call_usermode");
 
 	if (!path)
-		return_VALUE(-EINVAL);;
+		return_VALUE(-EINVAL);
 
 	argv[0] = path;
 

drivers/base/class.c

@@ -264,8 +264,6 @@ int class_device_add(struct class_device *class_dev)
 		return -EINVAL;
 
 	parent = class_get(class_dev->class);
-	if (class_dev->dev)
-		get_device(class_dev->dev);
 
 	pr_debug("CLASS: registering class device: ID = '%s'\n",
 		 class_dev->class_id);

drivers/base/memblk.c

@@ -13,13 +13,6 @@ static struct sysdev_class memblk_class = {
 	set_kset_name("memblk"),
 };
 
-
-static struct device_driver memblk_driver = {
-	.name		= "memblk",
-	.bus		= &system_bus_type,
-};
-
-
 /*
  * register_memblk - Setup a driverfs device for a MemBlk
  * @num - MemBlk number to use when creating the device.
@@ -37,7 +30,7 @@ int __init register_memblk(struct memblk *memblk, int num, struct node *root)
 	error = sys_device_register(&memblk->sysdev);
 	if (!error) 
 		error = sysfs_create_link(&root->sysdev.kobj,
-					  &memblk->sysdev,kobj,
+					  &memblk->sysdev.kobj,
 					  memblk->sysdev.kobj.name);
 	return error;
 }

drivers/base/node.c

@@ -2,7 +2,7 @@
  * drivers/base/node.c - basic Node class support
  */
 
-#include <linux/device.h>
+#include <linux/sysdev.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/mm.h>
@@ -14,18 +14,17 @@ static struct sysdev_class node_class = {
 };
 
 
-static ssize_t node_read_cpumap(struct device * dev, char * buf)
+static ssize_t node_read_cpumap(struct sys_device * dev, char * buf)
 {
-	struct node *node_dev = to_node(to_root(dev));
+	struct node *node_dev = to_node(dev);
         return sprintf(buf,"%lx\n",node_dev->cpumap);
 }
 static SYSDEV_ATTR(cpumap,S_IRUGO,node_read_cpumap,NULL);
 
 #define K(x) ((x) << (PAGE_SHIFT - 10))
-static ssize_t node_read_meminfo(struct device * dev, char * buf)
+static ssize_t node_read_meminfo(struct sys_device * dev, char * buf)
 {
-	struct sys_root *node = to_root(dev);
-	int nid = node->id;
+	int nid = dev->id;
 	struct sysinfo i;
 	si_meminfo_node(&i, nid);
 	return sprintf(buf, "\n"
@@ -64,8 +63,8 @@ int __init register_node(struct node *node, int num, struct node *parent)
 	error = sys_device_register(&node->sysdev);
 
 	if (!error){
-		sys_device_create_file(&node->sysroot.dev, &attr_cpumap);
-		sys_device_create_file(&node->sysroot.dev, &attr_meminfo);
+		sysdev_create_file(&node->sysdev, &attr_cpumap);
+		sysdev_create_file(&node->sysdev, &attr_meminfo);
 	}
 	return error;
 }

drivers/base/power.c

@@ -10,7 +10,7 @@
  *
  */
 
-#define DEBUG
+#undef DEBUG
 
 #include <linux/device.h>
 #include <linux/module.h>
@@ -49,19 +49,19 @@ extern int sysdev_restore(void);
  */
 int device_suspend(u32 state, u32 level)
 {
-	struct list_head * node;
+	struct device * dev;
 	int error = 0;
 
 	printk(KERN_EMERG "Suspending devices\n");
 
 	down_write(&devices_subsys.rwsem);
-	list_for_each(node,&devices_subsys.kset.list) {
-		struct device * dev = to_dev(node);
+	list_for_each_entry_reverse(dev,&devices_subsys.kset.list,kobj.entry) {
 		if (dev->driver && dev->driver->suspend) {
 			pr_debug("suspending device %s\n",dev->name);
 			error = dev->driver->suspend(dev,state,level);
 			if (error)
-				printk(KERN_ERR "%s: suspend returned %d\n",dev->name,error);
+				printk(KERN_ERR "%s: suspend returned %d\n",
+				       dev->name,error);
 		}
 	}
 	up_write(&devices_subsys.rwsem);
@@ -93,7 +93,7 @@ int device_suspend(u32 state, u32 level)
  */
 void device_resume(u32 level)
 {
-	struct list_head * node;
+	struct device * dev;
 
 	switch (level) {
 	case RESUME_POWER_ON:
@@ -107,8 +107,7 @@ void device_resume(u32 level)
 	}
 
 	down_write(&devices_subsys.rwsem);
-	list_for_each_prev(node,&devices_subsys.kset.list) {
-		struct device * dev = to_dev(node);
+	list_for_each_entry(dev,&devices_subsys.kset.list,kobj.entry) {
 		if (dev->driver && dev->driver->resume) {
 			pr_debug("resuming device %s\n",dev->name);
 			dev->driver->resume(dev,level);
@@ -124,13 +123,12 @@ void device_resume(u32 level)
  */
 void device_shutdown(void)
 {
-	struct list_head * entry;
+	struct device * dev;
 	
 	printk(KERN_EMERG "Shutting down devices\n");
 
 	down_write(&devices_subsys.rwsem);
-	list_for_each(entry,&devices_subsys.kset.list) {
-		struct device * dev = to_dev(entry);
+	list_for_each_entry_reverse(dev,&devices_subsys.kset.list,kobj.entry) {
 		pr_debug("shutting down %s: ",dev->name);
 		if (dev->driver && dev->driver->shutdown) {
 			pr_debug("Ok\n");

drivers/base/sys.c

@@ -12,7 +12,7 @@
  * add themselves as children of the system bus.
  */
 
-#define DEBUG
+#undef DEBUG
 
 #include <linux/sysdev.h>
 #include <linux/err.h>
@@ -62,6 +62,19 @@ static struct kobj_type ktype_sysdev = {
 	.sysfs_ops	= &sysfs_ops,
 };
 
+
+int sysdev_create_file(struct sys_device * s, struct sysdev_attribute * a)
+{
+	return sysfs_create_file(&s->kobj,&a->attr);
+}
+
+
+void sysdev_remove_file(struct sys_device * s, struct sysdev_attribute * a)
+{
+	sysfs_remove_file(&s->kobj,&a->attr);
+}
+
+
 /* 
  * declare system_subsys 
  */
@@ -104,9 +117,16 @@ int sysdev_driver_register(struct sysdev_class * cls,
 			   struct sysdev_driver * drv)
 {
 	down_write(&system_subsys.rwsem);
-	if (cls && kset_get(&cls->kset))
+	if (cls && kset_get(&cls->kset)) {
 		list_add_tail(&drv->entry,&cls->drivers);
-	else
+
+		/* If devices of this class already exist, tell the driver */
+		if (drv->add) {
+			struct sys_device *dev;
+			list_for_each_entry(dev, &cls->kset.list, kobj.entry)
+				drv->add(dev);
+		}
+	} else
 		list_add_tail(&drv->entry,&global_drivers);
 	up_write(&system_subsys.rwsem);
 	return 0;
@@ -123,8 +143,14 @@ void sysdev_driver_unregister(struct sysdev_class * cls,
 {
 	down_write(&system_subsys.rwsem);
 	list_del_init(&drv->entry);
-	if (cls)
+	if (cls) {
+		if (drv->remove) {
+			struct sys_device *dev;
+			list_for_each_entry(dev, &cls->kset.list, kobj.entry)
+				drv->remove(dev);
+		}
 		kset_put(&cls->kset);
+	}
 	up_write(&system_subsys.rwsem);
 }
 
@@ -157,7 +183,7 @@ int sys_device_register(struct sys_device * sysdev)
 	if (!error) {
 		struct sysdev_driver * drv;
 
-		down_read(&system_subsys.rwsem);
+		down_write(&system_subsys.rwsem);
 		/* Generic notification is implicit, because it's that 
 		 * code that should have called us. 
 		 */
@@ -173,7 +199,7 @@ int sys_device_register(struct sys_device * sysdev)
 			if (drv->add)
 				drv->add(sysdev);
 		}
-		up_read(&system_subsys.rwsem);
+		up_write(&system_subsys.rwsem);
 	}
 	return error;
 }
@@ -182,7 +208,7 @@ void sys_device_unregister(struct sys_device * sysdev)
 {
 	struct sysdev_driver * drv;
 
-	down_read(&system_subsys.rwsem);
+	down_write(&system_subsys.rwsem);
 	list_for_each_entry(drv,&global_drivers,entry) {
 		if (drv->remove)
 			drv->remove(sysdev);
@@ -192,7 +218,10 @@ void sys_device_unregister(struct sys_device * sysdev)
 		if (drv->remove)
 			drv->remove(sysdev);
 	}
-	up_read(&system_subsys.rwsem);
+
+	list_del_init(&sysdev->entry);
+
+	up_write(&system_subsys.rwsem);
 
 	kobject_unregister(&sysdev->kobj);
 }

drivers/block/cpqarray.c

@@ -1028,7 +1028,7 @@ static int ida_ioctl(struct inode *inode, struct file *filep, unsigned int cmd,
 	int diskinfo[4];
 	struct hd_geometry *geo = (struct hd_geometry *)arg;
 	ida_ioctl_t *io = (ida_ioctl_t*)arg;
-	ida_ioctl_t my_io;
+	ida_ioctl_t *my_io;
 
 	switch(cmd) {
 	case HDIO_GETGEO:
@@ -1051,12 +1051,24 @@ static int ida_ioctl(struct inode *inode, struct file *filep, unsigned int cmd,
 			return -EFAULT;
 		return 0;
 	case IDAPASSTHRU:
-		if (!capable(CAP_SYS_RAWIO)) return -EPERM;
-		if (copy_from_user(&my_io, io, sizeof(my_io)))
-			return -EFAULT;
-		error = ida_ctlr_ioctl(host, drv - host->drv, &my_io);
-		if (error) return error;
-		return copy_to_user(io, &my_io, sizeof(my_io)) ? -EFAULT : 0;
+		if (!capable(CAP_SYS_RAWIO))
+			return -EPERM;
+		my_io = kmalloc(sizeof(ida_ioctl_t), GFP_KERNEL);
+		if (!my_io)
+			return -ENOMEM;
+		error = -EFAULT;
+		if (copy_from_user(my_io, io, sizeof(*my_io)))
+			goto out_passthru;
+		error = ida_ctlr_ioctl(host, drv - host->drv, my_io);
+		if (error)
+			goto out_passthru;
+		error = -EFAULT;
+		if (copy_to_user(io, &my_io, sizeof(*my_io)))
+			goto out_passthru;
+		error = 0;
+out_passthru:
+		kfree(my_io);
+		return error;
 	case IDAGETCTLRSIG:
 		if (!arg) return -EINVAL;
 		put_user(host->ctlr_sig, (int*)arg);

drivers/char/agp/amd-k8-agp.c

@@ -278,12 +278,13 @@ static int __init agp_amdk8_probe(struct pci_dev *pdev,
 		default:	revstring="??";
 				break;
 		}
-		printk ("Detected AMD 8151 AGP Bridge rev %s", revstring);
+		printk (KERN_INFO PFX "Detected AMD 8151 AGP Bridge rev %s\n", revstring);
 		/*
 		 * Work around errata.
 		 * Chips before B2 stepping incorrectly reporting v3.5
 		 */
 		if (rev_id < 0x13) {
+			printk (KERN_INFO PFX "Correcting AGP revision (reports 3.5, is really 3.0)\n");
 			bridge->major_version = 3;
 			bridge->minor_version = 0;
 		}

drivers/char/agp/frontend.c

@@ -300,7 +300,6 @@ static struct agp_memory *agp_allocate_memory_wrap(size_t pg_count, u32 type)
 	struct agp_memory *memory;
 
 	memory = agp_allocate_memory(pg_count, type);
-   	printk(KERN_DEBUG "agp_allocate_memory: %p\n", memory);
 	if (memory == NULL)
 		return NULL;
 

drivers/char/agp/intel-agp.c

@@ -447,7 +447,7 @@ static int intel_i830_insert_entries(struct agp_memory *mem,off_t pg_start,
 		printk (KERN_DEBUG "pg_start == 0x%.8lx,intel_i830_private.gtt_entries == 0x%.8x\n",
 				pg_start,intel_i830_private.gtt_entries);
 
-		printk ("Trying to insert into local/stolen memory\n");
+		printk (KERN_INFO PFX "Trying to insert into local/stolen memory\n");
 		return (-EINVAL);
 	}
 
@@ -483,7 +483,7 @@ static int intel_i830_remove_entries(struct agp_memory *mem,off_t pg_start,
 	global_cache_flush();
 
 	if (pg_start < intel_i830_private.gtt_entries) {
-		printk ("Trying to disable local/stolen memory\n");
+		printk (KERN_INFO PFX "Trying to disable local/stolen memory\n");
 		return (-EINVAL);
 	}
 
@@ -645,7 +645,7 @@ static int intel_815_configure(void)
 	/* the Intel 815 chipset spec. says that bits 29-31 in the
 	* ATTBASE register are reserved -> try not to write them */
 	if (agp_bridge->gatt_bus_addr & INTEL_815_ATTBASE_MASK) {
-		printk (KERN_EMERG "gatt bus addr too high");
+		printk (KERN_EMERG PFX "gatt bus addr too high");
 		return -EINVAL;
 	}
 

drivers/char/agp/sworks-agp.c

@@ -240,7 +240,7 @@ static void serverworks_tlbflush(struct agp_memory *temp)
 	while(INREG8(serverworks_private.registers, 
 		     SVWRKS_POSTFLUSH) == 0x01) {
 		if((signed)(end - jiffies) <= 0) {
-			printk(KERN_ERR "Posted write buffer flush took more"
+			printk(KERN_ERR PFX "Posted write buffer flush took more"
 			       "then 3 seconds\n");
 		}
 	}
@@ -249,7 +249,7 @@ static void serverworks_tlbflush(struct agp_memory *temp)
 	while(INREG32(serverworks_private.registers, 
 		     SVWRKS_DIRFLUSH) == 0x00000001) {
 		if((signed)(end - jiffies) <= 0) {
-			printk(KERN_ERR "TLB flush took more"
+			printk(KERN_ERR PFX "TLB flush took more"
 			       "then 3 seconds\n");
 		}
 	}
@@ -447,8 +447,7 @@ static int __init agp_serverworks_probe(struct pci_dev *pdev,
 			PCI_DEVFN(0, 1));
 	if (!bridge_dev) {
 		printk(KERN_INFO PFX "agpgart: Detected a Serverworks "
-		       "Chipset, but could not find the secondary "
-		       "device.\n");
+		       "Chipset, but could not find the secondary device.\n");
 		return -ENODEV;
 	}
 
@@ -470,8 +469,8 @@ static int __init agp_serverworks_probe(struct pci_dev *pdev,
 	if (temp & PCI_BASE_ADDRESS_MEM_TYPE_64) {
 		pci_read_config_dword(pdev, SVWRKS_APSIZE + 4, &temp2);
 		if (temp2 != 0) {
-			printk("Detected 64 bit aperture address, but top "
-			       "bits are not zero.  Disabling agp\n");
+			printk(KERN_INFO PFX "Detected 64 bit aperture address, "
+			       "but top bits are not zero.  Disabling agp\n");
 			return -ENODEV;
 		}
 		serverworks_private.mm_addr_ofs = 0x18;
@@ -483,8 +482,8 @@ static int __init agp_serverworks_probe(struct pci_dev *pdev,
 		pci_read_config_dword(pdev,
 				serverworks_private.mm_addr_ofs + 4, &temp2);
 		if (temp2 != 0) {
-			printk("Detected 64 bit MMIO address, but top "
-			       "bits are not zero.  Disabling agp\n");
+			printk(KERN_INFO PFX "Detected 64 bit MMIO address, "
+			       "but top bits are not zero.  Disabling agp\n");
 			return -ENODEV;
 		}
 	}

drivers/char/mem.c

@@ -29,13 +29,56 @@
 #include <asm/io.h>
 #include <asm/pgalloc.h>
 
+#ifdef CONFIG_IA64
+# include <linux/efi.h>
+#endif
+
 #ifdef CONFIG_FB
 extern void fbmem_init(void);
 #endif
 #if defined(CONFIG_S390_TAPE) && defined(CONFIG_S390_TAPE_CHAR)
 extern void tapechar_init(void);
 #endif
-     
+
+/*
+ * Architectures vary in how they handle caching for addresses
+ * outside of main memory.
+ *
+ */
+static inline int uncached_access(struct file *file, unsigned long addr)
+{
+#if defined(__i386__)
+	/*
+	 * On the PPro and successors, the MTRRs are used to set
+	 * memory types for physical addresses outside main memory,
+	 * so blindly setting PCD or PWT on those pages is wrong.
+	 * For Pentiums and earlier, the surround logic should disable
+	 * caching for the high addresses through the KEN pin, but
+	 * we maintain the tradition of paranoia in this code.
+	 */
+	if (file->f_flags & O_SYNC)
+		return 1;
+ 	return !( test_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability) ||
+		  test_bit(X86_FEATURE_K6_MTRR, boot_cpu_data.x86_capability) ||
+		  test_bit(X86_FEATURE_CYRIX_ARR, boot_cpu_data.x86_capability) ||
+		  test_bit(X86_FEATURE_CENTAUR_MCR, boot_cpu_data.x86_capability) )
+	  && addr >= __pa(high_memory);
+#elif defined(CONFIG_IA64)
+	/*
+	 * On ia64, we ignore O_SYNC because we cannot tolerate memory attribute aliases.
+	 */
+	return !(efi_mem_attributes(addr) & EFI_MEMORY_WB);
+#else
+	/*
+	 * Accessing memory above the top the kernel knows about or through a file pointer
+	 * that was marked O_SYNC will be done non-cached.
+	 */
+	if (file->f_flags & O_SYNC)
+		return 1;
+	return addr >= __pa(high_memory);
+#endif
+}
+
 static ssize_t do_write_mem(struct file * file, void *p, unsigned long realp,
 			    const char * buf, size_t count, loff_t *ppos)
 {
@@ -72,7 +115,7 @@ static ssize_t read_mem(struct file * file, char * buf,
 	unsigned long p = *ppos;
 	unsigned long end_mem;
 	ssize_t read;
-	
+
 	end_mem = __pa(high_memory);
 	if (p >= end_mem)
 		return 0;
@@ -116,77 +159,16 @@ static ssize_t write_mem(struct file * file, const char * buf,
 	return do_write_mem(file, __va(p), p, buf, count, ppos);
 }
 
-#ifndef pgprot_noncached
-
-/*
- * This should probably be per-architecture in <asm/pgtable.h>
- */
-static inline pgprot_t pgprot_noncached(pgprot_t _prot)
-{
-	unsigned long prot = pgprot_val(_prot);
-
-#if defined(__i386__) || defined(__x86_64__)
-	/* On PPro and successors, PCD alone doesn't always mean 
-	    uncached because of interactions with the MTRRs. PCD | PWT
-	    means definitely uncached. */ 
-	if (boot_cpu_data.x86 > 3)
-		prot |= _PAGE_PCD | _PAGE_PWT;
-#elif defined(__powerpc__)
-	prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
-#elif defined(__mc68000__) && defined(CONFIG_MMU)
-#ifdef SUN3_PAGE_NOCACHE
-	if (MMU_IS_SUN3)
-		prot |= SUN3_PAGE_NOCACHE;
-	else
-#endif
-	if (MMU_IS_851 || MMU_IS_030)
-		prot |= _PAGE_NOCACHE030;
-	/* Use no-cache mode, serialized */
-	else if (MMU_IS_040 || MMU_IS_060)
-		prot = (prot & _CACHEMASK040) | _PAGE_NOCACHE_S;
-#endif
-
-	return __pgprot(prot);
-}
-
-#endif /* !pgprot_noncached */
-
-/*
- * Architectures vary in how they handle caching for addresses 
- * outside of main memory.
- */
-static inline int noncached_address(unsigned long addr)
-{
-#if defined(__i386__)
-	/* 
-	 * On the PPro and successors, the MTRRs are used to set
-	 * memory types for physical addresses outside main memory, 
-	 * so blindly setting PCD or PWT on those pages is wrong.
-	 * For Pentiums and earlier, the surround logic should disable 
-	 * caching for the high addresses through the KEN pin, but
-	 * we maintain the tradition of paranoia in this code.
-	 */
- 	return !( test_bit(X86_FEATURE_MTRR, boot_cpu_data.x86_capability) ||
-		  test_bit(X86_FEATURE_K6_MTRR, boot_cpu_data.x86_capability) ||
-		  test_bit(X86_FEATURE_CYRIX_ARR, boot_cpu_data.x86_capability) ||
-		  test_bit(X86_FEATURE_CENTAUR_MCR, boot_cpu_data.x86_capability) )
-	  && addr >= __pa(high_memory);
-#else
-	return addr >= __pa(high_memory);
-#endif
-}
-
 static int mmap_mem(struct file * file, struct vm_area_struct * vma)
 {
 	unsigned long offset = vma->vm_pgoff << PAGE_SHIFT;
+	int uncached;
 
-	/*
-	 * Accessing memory above the top the kernel knows about or
-	 * through a file pointer that was marked O_SYNC will be
-	 * done non-cached.
-	 */
-	if (noncached_address(offset) || (file->f_flags & O_SYNC))
+	uncached = uncached_access(file, offset);
+#ifdef pgprot_noncached
+	if (uncached)
 		vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+#endif
 
 	/* Don't try to swap out physical pages.. */
 	vma->vm_flags |= VM_RESERVED;
@@ -194,7 +176,7 @@ static int mmap_mem(struct file * file, struct vm_area_struct * vma)
 	/*
 	 * Don't dump addresses that are not real memory to a core file.
 	 */
-	if (offset >= __pa(high_memory) || (file->f_flags & O_SYNC))
+	if (uncached)
 		vma->vm_flags |= VM_IO;
 
 	if (remap_page_range(vma, vma->vm_start, offset, vma->vm_end-vma->vm_start,
@@ -713,4 +695,4 @@ static int __init chr_dev_init(void)
 	return 0;
 }
 
-subsys_initcall(chr_dev_init);
+fs_initcall(chr_dev_init);

drivers/char/rtc.c

@@ -284,12 +284,13 @@ static ssize_t rtc_read(struct file *file, char *buf,
 
 	add_wait_queue(&rtc_wait, &wait);
 
-	current->state = TASK_INTERRUPTIBLE;
-		
 	do {
 		/* First make it right. Then make it fast. Putting this whole
 		 * block within the parentheses of a while would be too
 		 * confusing. And no, xchg() is not the answer. */
+
+		__set_current_state(TASK_INTERRUPTIBLE);
+		
 		spin_lock_irq (&rtc_lock);
 		data = rtc_irq_data;
 		rtc_irq_data = 0;

drivers/i2c/Kconfig

@@ -193,6 +193,10 @@ config I2C_IBM_OCP_ADAP
 	tristate "IBM on-chip I2C Adapter"
 	depends on I2C_IBM_OCP_ALGO
 
+config I2C_IOP3XX
+	tristate "Intel XScale IOP3xx on-chip I2C interface"
+	depends on ARCH_IOP3XX && I2C
+
 config I2C_CHARDEV
 	tristate "I2C device interface"
 	depends on I2C

drivers/i2c/Makefile

@@ -16,4 +16,5 @@ obj-$(CONFIG_ITE_I2C_ADAP)	+= i2c-adap-ite.o
 obj-$(CONFIG_SCx200_I2C)	+= scx200_i2c.o
 obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
 obj-$(CONFIG_I2C_SENSOR)	+= i2c-sensor.o
+obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
 obj-y				+= busses/ chips/

drivers/i2c/chips/Kconfig

@@ -47,6 +47,21 @@ config SENSORS_LM75
 	  in the lm_sensors package, which you can download at 
 	  http://www.lm-sensors.nu
 	  
+config SENSORS_LM85
+	tristate "  National Semiconductors LM85 and compatibles"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for National Semiconductor LM85
+	  sensor chips and clones: ADT7463 and ADM1027.
+	  This can also be built as a module which can be inserted and
+	  removed while the kernel is running.
+
+	  The module will be called lm85.
+
+	  You will also need the latest user-space utilties: you can find them
+	  in the lm_sensors package, which you can download at 
+	  http://www.lm-sensors.nu
+	  
 config SENSORS_VIA686A
 	tristate "  VIA686A"
 	depends on I2C && EXPERIMENTAL
@@ -76,8 +91,8 @@ config SENSORS_W83781D
 
 config I2C_SENSOR
 	tristate
-	default y if SENSORS_ADM1021=y || SENSORS_IT87=y || SENSORS_LM75=y || SENSORS_VIA686A=y || SENSORS_W83781D=y
-	default m if SENSORS_ADM1021=m || SENSORS_IT87=m || SENSORS_LM75=m || SENSORS_VIA686A=m || SENSORS_W83781D=m
+	default y if SENSORS_ADM1021=y || SENSORS_IT87=y || SENSORS_LM75=y || SENSORS_VIA686A=y || SENSORS_W83781D=y || SENSORS_LM85=y
+	default m if SENSORS_ADM1021=m || SENSORS_IT87=m || SENSORS_LM75=m || SENSORS_VIA686A=m || SENSORS_W83781D=m || SENSORS_LM85=m
 	default n
 
 endmenu

drivers/i2c/chips/Makefile

@@ -5,5 +5,6 @@
 obj-$(CONFIG_SENSORS_ADM1021)	+= adm1021.o
 obj-$(CONFIG_SENSORS_IT87)	+= it87.o
 obj-$(CONFIG_SENSORS_LM75)	+= lm75.o
+obj-$(CONFIG_SENSORS_LM85)	+= lm85.o
 obj-$(CONFIG_SENSORS_VIA686A)	+= via686a.o
 obj-$(CONFIG_SENSORS_W83781D)	+= w83781d.o

drivers/i2c/i2c-core.c

@@ -510,7 +510,7 @@ int i2c_master_send(struct i2c_client *client,const char *buf ,int count)
 		msg.addr   = client->addr;
 		msg.flags = client->flags & I2C_M_TEN;
 		msg.len = count;
-		(const char *)msg.buf = buf;
+		msg.buf = (char *)buf;
 	
 		DEB2(dev_dbg(&client->adapter->dev, "master_send: writing %d bytes.\n",
 				count));
@@ -861,13 +861,13 @@ int i2c_smbus_check_pec(u16 addr, u8 command, int size, u8 partial,
 	return 0;	
 }
 
-extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value)
+s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value)
 {
 	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
  	                      value,0,I2C_SMBUS_QUICK,NULL);
 }
 
-extern s32 i2c_smbus_read_byte(struct i2c_client * client)
+s32 i2c_smbus_read_byte(struct i2c_client *client)
 {
 	union i2c_smbus_data data;
 	if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
@@ -877,14 +877,14 @@ extern s32 i2c_smbus_read_byte(struct i2c_client * client)
 		return 0x0FF & data.byte;
 }
 
-extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value)
+s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value)
 {
 	union i2c_smbus_data data;	/* only for PEC */
 	return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
 	                      I2C_SMBUS_WRITE,value, I2C_SMBUS_BYTE,&data);
 }
 
-extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command)
+s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command)
 {
 	union i2c_smbus_data data;
 	if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
@@ -894,8 +894,7 @@ extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command)
 		return 0x0FF & data.byte;
 }
 
-extern s32 i2c_smbus_write_byte_data(struct i2c_client * client, u8 command,
-                                     u8 value)
+s32 i2c_smbus_write_byte_data(struct i2c_client *client, u8 command, u8 value)
 {
 	union i2c_smbus_data data;
 	data.byte = value;
@@ -904,7 +903,7 @@ extern s32 i2c_smbus_write_byte_data(struct i2c_client * client, u8 command,
 	                      I2C_SMBUS_BYTE_DATA,&data);
 }
 
-extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command)
+s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command)
 {
 	union i2c_smbus_data data;
 	if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
@@ -914,8 +913,7 @@ extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command)
 		return 0x0FFFF & data.word;
 }
 
-extern s32 i2c_smbus_write_word_data(struct i2c_client * client,
-                                     u8 command, u16 value)
+s32 i2c_smbus_write_word_data(struct i2c_client *client, u8 command, u16 value)
 {
 	union i2c_smbus_data data;
 	data.word = value;
@@ -924,8 +922,7 @@ extern s32 i2c_smbus_write_word_data(struct i2c_client * client,
 	                      I2C_SMBUS_WORD_DATA,&data);
 }
 
-extern s32 i2c_smbus_process_call(struct i2c_client * client,
-                                  u8 command, u16 value)
+s32 i2c_smbus_process_call(struct i2c_client *client, u8 command, u16 value)
 {
 	union i2c_smbus_data data;
 	data.word = value;
@@ -938,8 +935,7 @@ extern s32 i2c_smbus_process_call(struct i2c_client * client,
 }
 
 /* Returns the number of read bytes */
-extern s32 i2c_smbus_read_block_data(struct i2c_client * client,
-                                     u8 command, u8 *values)
+s32 i2c_smbus_read_block_data(struct i2c_client *client, u8 command, u8 *values)
 {
 	union i2c_smbus_data data;
 	int i;
@@ -954,8 +950,7 @@ extern s32 i2c_smbus_read_block_data(struct i2c_client * client,
 	}
 }
 
-extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
-                                      u8 command, u8 length, u8 *values)
+s32 i2c_smbus_write_block_data(struct i2c_client *client, u8 command, u8 length, u8 *values)
 {
 	union i2c_smbus_data data;
 	int i;
@@ -970,8 +965,7 @@ extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
 }
 
 /* Returns the number of read bytes */
-extern s32 i2c_smbus_block_process_call(struct i2c_client * client,
-                                        u8 command, u8 length, u8 *values)
+s32 i2c_smbus_block_process_call(struct i2c_client *client, u8 command, u8 length, u8 *values)
 {
 	union i2c_smbus_data data;
 	int i;
@@ -990,8 +984,7 @@ extern s32 i2c_smbus_block_process_call(struct i2c_client * client,
 }
 
 /* Returns the number of read bytes */
-extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
-                                         u8 command, u8 *values)
+s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command, u8 *values)
 {
 	union i2c_smbus_data data;
 	int i;
@@ -1006,8 +999,7 @@ extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client,
 	}
 }
 
-extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
-                                          u8 command, u8 length, u8 *values)
+s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command, u8 length, u8 *values)
 {
 	union i2c_smbus_data data;
 	int i;

drivers/i2c/i2c-dev.c

@@ -122,7 +122,7 @@ static ssize_t show_dev(struct class_device *class_dev, char *buf)
 }
 static CLASS_DEVICE_ATTR(dev, S_IRUGO, show_dev, NULL);
 
-static ssize_t i2cdev_read (struct file *file, char *buf, size_t count,
+static ssize_t i2cdev_read (struct file *file, char __user *buf, size_t count,
                             loff_t *offset)
 {
 	char *tmp;
@@ -147,7 +147,7 @@ static ssize_t i2cdev_read (struct file *file, char *buf, size_t count,
 	return ret;
 }
 
-static ssize_t i2cdev_write (struct file *file, const char *buf, size_t count,
+static ssize_t i2cdev_write (struct file *file, const char __user *buf, size_t count,
                              loff_t *offset)
 {
 	int ret;
@@ -211,12 +211,12 @@ int i2cdev_ioctl (struct inode *inode, struct file *file, unsigned int cmd,
 		return 0;
 	case I2C_FUNCS:
 		funcs = i2c_get_functionality(client->adapter);
-		return (copy_to_user((unsigned long *)arg,&funcs,
+		return (copy_to_user((unsigned long __user *)arg, &funcs,
 		                     sizeof(unsigned long)))?-EFAULT:0;
 
         case I2C_RDWR:
 		if (copy_from_user(&rdwr_arg, 
-				   (struct i2c_rdwr_ioctl_data *)arg, 
+				   (struct i2c_rdwr_ioctl_data __user *)arg, 
 				   sizeof(rdwr_arg)))
 			return -EFAULT;
 
@@ -284,7 +284,7 @@ int i2cdev_ioctl (struct inode *inode, struct file *file, unsigned int cmd,
 
 	case I2C_SMBUS:
 		if (copy_from_user(&data_arg,
-		                   (struct i2c_smbus_ioctl_data *) arg,
+		                   (struct i2c_smbus_ioctl_data __user *) arg,
 		                   sizeof(struct i2c_smbus_ioctl_data)))
 			return -EFAULT;
 		if ((data_arg.size != I2C_SMBUS_BYTE) && 

drivers/i2c/i2c-iop3xx.h

+/* ------------------------------------------------------------------------- */
+/* i2c-iop3xx.h algorithm driver definitions private to i2c-iop3xx.c         */
+/* ------------------------------------------------------------------------- */
+/*   Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd
+ *                      <Peter dot Milne at D hyphen TACQ dot com>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, version 2.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.                */
+/* ------------------------------------------------------------------------- */
+
+
+#ifndef I2C_IOP3XX_H
+#define I2C_IOP3XX_H 1
+
+/*
+ * iop321 hardware bit definitions
+ */
+#define IOP321_ICR_FAST_MODE	0x8000	/* 1=400kBps, 0=100kBps */
+#define IOP321_ICR_UNIT_RESET	0x4000	/* 1=RESET */
+#define IOP321_ICR_SADIE	0x2000	/* 1=Slave Detect Interrupt Enable */
+#define IOP321_ICR_ALDIE	0x1000	/* 1=Arb Loss Detect Interrupt Enable */
+#define IOP321_ICR_SSDIE	0x0800	/* 1=Slave STOP Detect Interrupt Enable */
+#define IOP321_ICR_BERRIE	0x0400	/* 1=Bus Error Interrupt Enable */
+#define IOP321_ICR_RXFULLIE	0x0200	/* 1=Receive Full Interrupt Enable */
+#define IOP321_ICR_TXEMPTYIE	0x0100	/* 1=Transmit Empty Interrupt Enable */
+#define IOP321_ICR_GCD		0x0080	/* 1=General Call Disable */
+/*
+ * IOP321_ICR_GCD: 1 disables response as slave. "This bit must be set
+ * when sending a master mode general call message from the I2C unit"
+ */
+#define IOP321_ICR_UE		0x0040	/* 1=Unit Enable */
+/*
+ * "NOTE: To avoid I2C bus integrity problems, 
+ * the user needs to ensure that the GPIO Output Data Register - 
+ * GPOD bits associated with an I2C port are cleared prior to setting 
+ * the enable bit for that I2C serial port. 
+ * The user prepares to enable I2C port 0 and 
+ * I2C port 1 by clearing GPOD bits 7:6 and GPOD bits 5:4, respectively.
+ */
+#define IOP321_ICR_SCLEN	0x0020	/* 1=SCL enable for master mode */
+#define IOP321_ICR_MABORT	0x0010	/* 1=Send a STOP with no data 
+					 * NB TBYTE must be clear */
+#define IOP321_ICR_TBYTE	0x0008	/* 1=Send/Receive a byte. i2c clears */
+#define IOP321_ICR_NACK		0x0004	/* 1=reply with NACK */
+#define IOP321_ICR_MSTOP	0x0002	/* 1=send a STOP after next data byte */
+#define IOP321_ICR_MSTART	0x0001	/* 1=initiate a START */
+
+
+#define IOP321_ISR_BERRD	0x0400	/* 1=BUS ERROR Detected */
+#define IOP321_ISR_SAD		0x0200	/* 1=Slave ADdress Detected */
+#define IOP321_ISR_GCAD		0x0100	/* 1=General Call Address Detected */
+#define IOP321_ISR_RXFULL	0x0080	/* 1=Receive Full */
+#define IOP321_ISR_TXEMPTY	0x0040	/* 1=Transmit Empty */
+#define IOP321_ISR_ALD		0x0020	/* 1=Arbitration Loss Detected */
+#define IOP321_ISR_SSD		0x0010	/* 1=Slave STOP Detected */
+#define IOP321_ISR_BBUSY	0x0008	/* 1=Bus BUSY */
+#define IOP321_ISR_UNITBUSY	0x0004	/* 1=Unit Busy */
+#define IOP321_ISR_NACK		0x0002	/* 1=Unit Rx or Tx a NACK */
+#define IOP321_ISR_RXREAD	0x0001	/* 1=READ 0=WRITE (R/W bit of slave addr */
+
+#define IOP321_ISR_CLEARBITS	0x07f0
+
+#define IOP321_ISAR_SAMASK	0x007f
+
+#define IOP321_IDBR_MASK	0x00ff
+
+#define IOP321_IBMR_SCL		0x0002
+#define IOP321_IBMR_SDA		0x0001
+
+#define IOP321_GPOD_I2C0	0x00c0	/* clear these bits to enable ch0 */
+#define IOP321_GPOD_I2C1	0x0030	/* clear these bits to enable ch1 */
+
+#define MYSAR			0x02	/* SWAG a suitable slave address */
+
+#define I2C_ERR			321
+#define I2C_ERR_BERR		(I2C_ERR+0)
+#define I2C_ERR_ALD		(I2C_ERR+1)
+
+
+struct iop3xx_biu {                /* Bus Interface Unit - the hardware */
+/* physical hardware defs - regs*/
+	u32 *CR;
+	u32 *SR;
+	u32 *SAR;
+	u32 *DBR;
+	u32 *BMR;
+/* irq bit vector */
+	u32 irq;
+/* stored flags */
+	u32 SR_enabled, SR_received;
+};
+
+struct i2c_algo_iop3xx_data {
+	int channel;
+
+	wait_queue_head_t waitq;
+	spinlock_t lock;
+	int timeout;
+	struct iop3xx_biu* biu;
+};
+
+#define REGION_START(adap)	((u32)((adap)->biu->CR))
+#define REGION_END(adap)	((u32)((adap)->biu->BMR+1))
+#define REGION_LENGTH(adap)	(REGION_END(adap)-REGION_START(adap))
+
+#define IRQ_STATUS_MASK(adap)	(1<<adap->biu->irq)
+
+#endif /* I2C_IOP3XX_H */

drivers/pcmcia/Kconfig

@@ -29,8 +29,8 @@ config PCMCIA
 	  and ds.  If you want to compile it as a module, say M here and
 	  read <file:Documentation/modules.txt>.
 
-config CARDBUS
-	bool "CardBus support"
+config YENTA
+	tristate "CardBus yenta-compatible bridge support"
 	depends on PCMCIA && PCI
 	---help---
 	  CardBus is a bus mastering architecture for PC-cards, which allows
@@ -48,6 +48,11 @@ config CARDBUS
 
 	  If unsure, say Y.
 
+config CARDBUS
+	bool
+	depends on YENTA
+	default y if YENTA
+
 config I82092
 	tristate "i82092 compatible bridge support"
 	depends on PCMCIA && PCI
@@ -58,7 +63,7 @@ config I82092
 
 config I82365
 	tristate "i82365 compatible bridge support"
-	depends on PCMCIA
+	depends on PCMCIA && ISA
 	help
 	  Say Y here to include support for ISA-bus PCMCIA host bridges that
 	  are register compatible with the Intel i82365.  These are found on

drivers/pcmcia/Makefile

@@ -3,9 +3,7 @@
 #
 
 obj-$(CONFIG_PCMCIA)				+= pcmcia_core.o ds.o
-ifeq ($(CONFIG_CARDBUS),y)
-  obj-$(CONFIG_PCMCIA) 				+= yenta_socket.o
-endif
+obj-$(CONFIG_YENTA) 				+= yenta.o
 
 obj-$(CONFIG_I82365)				+= i82365.o
 obj-$(CONFIG_I82092)				+= i82092.o
@@ -14,8 +12,6 @@ obj-$(CONFIG_HD64465_PCMCIA)			+= hd64465_ss.o
 obj-$(CONFIG_PCMCIA_SA1100)			+= sa11xx_core.o sa1100_cs.o
 obj-$(CONFIG_PCMCIA_SA1111)			+= sa11xx_core.o sa1111_cs.o
 
-yenta_socket-y					+= pci_socket.o yenta.o
-
 pcmcia_core-y					+= cistpl.o rsrc_mgr.o bulkmem.o cs.o
 pcmcia_core-$(CONFIG_CARDBUS)			+= cardbus.o
 

drivers/pcmcia/bulkmem.c

@@ -63,7 +63,7 @@ static int do_mtd_request(memory_handle_t handle, mtd_request_t *req,
 {
     int ret, tries;
     client_t *mtd;
-    socket_info_t *s;
+    struct pcmcia_socket *s;
     
     mtd = handle->mtd;
     if (mtd == NULL)
@@ -130,7 +130,7 @@ static void retry_erase(erase_busy_t *busy, u_int cause)
     eraseq_entry_t *erase = busy->erase;
     mtd_request_t req;
     client_t *mtd;
-    socket_info_t *s;
+    struct pcmcia_socket *s;
     int ret;
 
     DEBUG(2, "cs: trying erase request 0x%p...\n", busy);
@@ -259,27 +259,27 @@ static int mtd_modify_window(window_handle_t win, mtd_mod_win_t *req)
 	win->ctl.flags |= MAP_ATTRIB;
     win->ctl.speed = req->AccessSpeed;
     win->ctl.card_start = req->CardOffset;
-    win->sock->ss_entry->set_mem_map(win->sock->sock, &win->ctl);
+    win->sock->ss_entry->set_mem_map(win->sock, &win->ctl);
     return CS_SUCCESS;
 }
 
 static int mtd_set_vpp(client_handle_t handle, mtd_vpp_req_t *req)
 {
-    socket_info_t *s;
+    struct pcmcia_socket *s;
     if (CHECK_HANDLE(handle))
 	return CS_BAD_HANDLE;
     if (req->Vpp1 != req->Vpp2)
 	return CS_BAD_VPP;
     s = SOCKET(handle);
     s->socket.Vpp = req->Vpp1;
-    if (s->ss_entry->set_socket(s->sock, &s->socket))
+    if (s->ss_entry->set_socket(s, &s->socket))
 	return CS_BAD_VPP;
     return CS_SUCCESS;
 }
 
 static int mtd_rdy_mask(client_handle_t handle, mtd_rdy_req_t *req)
 {
-    socket_info_t *s;
+    struct pcmcia_socket *s;
     if (CHECK_HANDLE(handle))
 	return CS_BAD_HANDLE;
     s = SOCKET(handle);
@@ -287,7 +287,7 @@ static int mtd_rdy_mask(client_handle_t handle, mtd_rdy_req_t *req)
 	s->socket.csc_mask |= SS_READY;
     else
 	s->socket.csc_mask &= ~SS_READY;
-    if (s->ss_entry->set_socket(s->sock, &s->socket))
+    if (s->ss_entry->set_socket(s, &s->socket))
 	return CS_GENERAL_FAILURE;
     return CS_SUCCESS;
 }
@@ -417,7 +417,7 @@ static int match_region(client_handle_t handle, memory_handle_t list,
 
 int pcmcia_get_first_region(client_handle_t handle, region_info_t *rgn)
 {
-    socket_info_t *s = SOCKET(handle);
+    struct pcmcia_socket *s = SOCKET(handle);
     if (CHECK_HANDLE(handle))
 	return CS_BAD_HANDLE;
     
@@ -450,7 +450,7 @@ int pcmcia_get_next_region(client_handle_t handle, region_info_t *rgn)
 int pcmcia_register_mtd(client_handle_t handle, mtd_reg_t *reg)
 {
     memory_handle_t list;
-    socket_info_t *s;
+    struct pcmcia_socket *s;
     
     if (CHECK_HANDLE(handle))
 	return CS_BAD_HANDLE;
@@ -533,12 +533,12 @@ int pcmcia_check_erase_queue(eraseq_handle_t eraseq)
 
 int pcmcia_open_memory(client_handle_t *handle, open_mem_t *open, memory_handle_t *mh)
 {
-    socket_info_t *s;
+    struct pcmcia_socket *s;
     memory_handle_t region;
     
     if ((handle == NULL) || CHECK_HANDLE(*handle))
 	return CS_BAD_HANDLE;
-    s = SOCKET(*handle);
+    s = (*handle)->Socket;
     if (open->Attributes & MEMORY_TYPE_AM)
 	region = s->a_region;
     else

drivers/pcmcia/cardbus.c

@@ -119,11 +119,11 @@ static u_int xlate_rom_addr(u_char * b, u_int addr)
 
     These are similar to setup_cis_mem and release_cis_mem for 16-bit
     cards.  The "result" that is used externally is the cb_cis_virt
-    pointer in the socket_info_t structure.
+    pointer in the struct pcmcia_socket structure.
     
 =====================================================================*/
 
-static void cb_release_cis_mem(socket_info_t * s)
+static void cb_release_cis_mem(struct pcmcia_socket * s)
 {
 	if (s->cb_cis_virt) {
 		DEBUG(1, "cs: cb_release_cis_mem()\n");
@@ -133,7 +133,7 @@ static void cb_release_cis_mem(socket_info_t * s)
 	}
 }
 
-static int cb_setup_cis_mem(socket_info_t * s, struct resource *res)
+static int cb_setup_cis_mem(struct pcmcia_socket * s, struct resource *res)
 {
 	unsigned int start, size;
 
@@ -162,7 +162,7 @@ static int cb_setup_cis_mem(socket_info_t * s, struct resource *res)
     
 =====================================================================*/
 
-int read_cb_mem(socket_info_t * s, int space, u_int addr, u_int len, void *ptr)
+int read_cb_mem(struct pcmcia_socket * s, int space, u_int addr, u_int len, void *ptr)
 {
 	struct pci_dev *dev;
 	struct resource *res;
@@ -237,7 +237,7 @@ static void cardbus_assign_irqs(struct pci_bus *bus, int irq)
 	}
 }
 
-int cb_alloc(socket_info_t * s)
+int cb_alloc(struct pcmcia_socket * s)
 {
 	struct pci_bus *bus = s->cap.cb_dev->subordinate;
 	struct pci_dev *dev;
@@ -266,7 +266,7 @@ int cb_alloc(socket_info_t * s)
 	return CS_SUCCESS;
 }
 
-void cb_free(socket_info_t * s)
+void cb_free(struct pcmcia_socket * s)
 {
 	struct pci_dev *bridge = s->cap.cb_dev;
 

drivers/pcmcia/cistpl.c

@@ -82,11 +82,11 @@ static const u_int exponent[] = {
 
 INT_MODULE_PARM(cis_width,	0);		/* 16-bit CIS? */
 
-void release_cis_mem(socket_info_t *s)
+void release_cis_mem(struct pcmcia_socket *s)
 {
     if (s->cis_mem.sys_start != 0) {
 	s->cis_mem.flags &= ~MAP_ACTIVE;
-	s->ss_entry->set_mem_map(s->sock, &s->cis_mem);
+	s->ss_entry->set_mem_map(s, &s->cis_mem);
 	if (!(s->cap.features & SS_CAP_STATIC_MAP))
 	    release_mem_region(s->cis_mem.sys_start, s->cap.map_size);
 	iounmap(s->cis_virt);
@@ -101,7 +101,7 @@ void release_cis_mem(socket_info_t *s)
  * map the memory space.
  */
 static unsigned char *
-set_cis_map(socket_info_t *s, unsigned int card_offset, unsigned int flags)
+set_cis_map(struct pcmcia_socket *s, unsigned int card_offset, unsigned int flags)
 {
     pccard_mem_map *mem = &s->cis_mem;
     if (!(s->cap.features & SS_CAP_STATIC_MAP) &&
@@ -119,7 +119,7 @@ set_cis_map(socket_info_t *s, unsigned int card_offset, unsigned int flags)
     }
     mem->card_start = card_offset;
     mem->flags = flags;
-    s->ss_entry->set_mem_map(s->sock, mem);
+    s->ss_entry->set_mem_map(s, mem);
     if (s->cap.features & SS_CAP_STATIC_MAP) {
 	if (s->cis_virt)
 	    iounmap(s->cis_virt);
@@ -139,7 +139,7 @@ set_cis_map(socket_info_t *s, unsigned int card_offset, unsigned int flags)
 #define IS_ATTR		1
 #define IS_INDIRECT	8
 
-int read_cis_mem(socket_info_t *s, int attr, u_int addr,
+int read_cis_mem(struct pcmcia_socket *s, int attr, u_int addr,
 		 u_int len, void *ptr)
 {
     u_char *sys, *end, *buf = ptr;
@@ -202,7 +202,7 @@ int read_cis_mem(socket_info_t *s, int attr, u_int addr,
     return 0;
 }
 
-void write_cis_mem(socket_info_t *s, int attr, u_int addr,
+void write_cis_mem(struct pcmcia_socket *s, int attr, u_int addr,
 		   u_int len, void *ptr)
 {
     u_char *sys, *end, *buf = ptr;
@@ -266,7 +266,7 @@ void write_cis_mem(socket_info_t *s, int attr, u_int addr,
     
 ======================================================================*/
 
-static void read_cis_cache(socket_info_t *s, int attr, u_int addr,
+static void read_cis_cache(struct pcmcia_socket *s, int attr, u_int addr,
 			   u_int len, void *ptr)
 {
     struct cis_cache_entry *cis;
@@ -306,7 +306,7 @@ static void read_cis_cache(socket_info_t *s, int attr, u_int addr,
 }
 
 static void
-remove_cis_cache(socket_info_t *s, int attr, u_int addr, u_int len)
+remove_cis_cache(struct pcmcia_socket *s, int attr, u_int addr, u_int len)
 {
 	struct cis_cache_entry *cis;
 
@@ -318,7 +318,7 @@ remove_cis_cache(socket_info_t *s, int attr, u_int addr, u_int len)
 		}
 }
 
-void destroy_cis_cache(socket_info_t *s)
+void destroy_cis_cache(struct pcmcia_socket *s)
 {
 	struct list_head *l, *n;
 
@@ -337,7 +337,7 @@ void destroy_cis_cache(socket_info_t *s)
     
 ======================================================================*/
 
-int verify_cis_cache(socket_info_t *s)
+int verify_cis_cache(struct pcmcia_socket *s)
 {
 	struct cis_cache_entry *cis;
 	char buf[256];
@@ -369,7 +369,7 @@ int verify_cis_cache(socket_info_t *s)
 
 int pcmcia_replace_cis(client_handle_t handle, cisdump_t *cis)
 {
-    socket_info_t *s;
+    struct pcmcia_socket *s;
     if (CHECK_HANDLE(handle))
 	return CS_BAD_HANDLE;
     s = SOCKET(handle);
@@ -409,7 +409,7 @@ int pcmcia_get_next_tuple(client_handle_t handle, tuple_t *tuple);
 
 int pcmcia_get_first_tuple(client_handle_t handle, tuple_t *tuple)
 {
-    socket_info_t *s;
+    struct pcmcia_socket *s;
     if (CHECK_HANDLE(handle))
 	return CS_BAD_HANDLE;
     s = SOCKET(handle);
@@ -445,7 +445,7 @@ int pcmcia_get_first_tuple(client_handle_t handle, tuple_t *tuple)
     return pcmcia_get_next_tuple(handle, tuple);
 }
 
-static int follow_link(socket_info_t *s, tuple_t *tuple)
+static int follow_link(struct pcmcia_socket *s, tuple_t *tuple)
 {
     u_char link[5];
     u_int ofs;
@@ -487,7 +487,7 @@ static int follow_link(socket_info_t *s, tuple_t *tuple)
 
 int pcmcia_get_next_tuple(client_handle_t handle, tuple_t *tuple)
 {
-    socket_info_t *s;
+    struct pcmcia_socket *s;
     u_char link[2], tmp;
     int ofs, i, attr;
     
@@ -588,7 +588,7 @@ int pcmcia_get_next_tuple(client_handle_t handle, tuple_t *tuple)
 
 int pcmcia_get_tuple_data(client_handle_t handle, tuple_t *tuple)
 {
-    socket_info_t *s;
+    struct pcmcia_socket *s;
     u_int len;
     
     if (CHECK_HANDLE(handle))

drivers/pcmcia/cs_internal.h

@@ -21,13 +21,6 @@
 
 #include <linux/config.h>
 
-typedef struct erase_busy_t {
-    eraseq_entry_t	*erase;
-    client_handle_t	client;
-    struct timer_list	timeout;
-    struct erase_busy_t	*prev, *next;
-} erase_busy_t;
-
 #define ERASEQ_MAGIC	0xFA67
 typedef struct eraseq_t {
     u_short		eraseq_magic;
@@ -39,7 +32,7 @@ typedef struct eraseq_t {
 #define CLIENT_MAGIC 	0x51E6
 typedef struct client_t {
     u_short		client_magic;
-    socket_t		Socket;
+    struct pcmcia_socket *Socket;
     u_char		Function;
     dev_info_t		dev_info;
     u_int		Attributes;
@@ -63,23 +56,6 @@ typedef struct client_t {
 #define CLIENT_WIN_REQ(i)	(0x20<<(i))
 #define CLIENT_CARDBUS		0x8000
 
-typedef struct io_window_t {
-    u_int		Attributes;
-    ioaddr_t		BasePort, NumPorts;
-    ioaddr_t		InUse, Config;
-} io_window_t;
-
-#define WINDOW_MAGIC	0xB35C
-typedef struct window_t {
-    u_short		magic;
-    u_short		index;
-    client_handle_t	handle;
-    struct socket_info_t *sock;
-    u_long		base;
-    u_long		size;
-    pccard_mem_map	ctl;
-} window_t;
-
 #define REGION_MAGIC	0xE3C9
 typedef struct region_t {
     u_short		region_magic;
@@ -108,12 +84,6 @@ typedef struct config_t {
     } irq;
 } config_t;
 
-/* Maximum number of IO windows per socket */
-#define MAX_IO_WIN 2
-
-/* Maximum number of memory windows per socket */
-#define MAX_WIN 4
-
 struct cis_cache_entry {
 	struct list_head	node;
 	unsigned int		addr;
@@ -122,48 +92,6 @@ struct cis_cache_entry {
 	unsigned char		cache[0];
 };
 
-typedef struct socket_info_t {
-    spinlock_t			lock;
-    struct pccard_operations *	ss_entry;
-    u_int			sock;
-    socket_state_t		socket;
-    socket_cap_t		cap;
-    u_int			state;
-    u_short			functions;
-    u_short			lock_count;
-    client_handle_t		clients;
-    u_int			real_clients;
-    pccard_mem_map		cis_mem;
-    u_char			*cis_virt;
-    config_t			*config;
-#ifdef CONFIG_CARDBUS
-    struct resource *		cb_cis_res;
-    u_char			*cb_cis_virt;
-#endif
-    struct {
-	u_int			AssignedIRQ;
-	u_int			Config;
-    } irq;
-    io_window_t			io[MAX_IO_WIN];
-    window_t			win[MAX_WIN];
-    region_t			*c_region, *a_region;
-    erase_busy_t		erase_busy;
-    struct list_head		cis_cache;
-    u_int			fake_cis_len;
-    char			*fake_cis;
-#ifdef CONFIG_PROC_FS
-    struct proc_dir_entry	*proc;
-#endif
-
-    struct semaphore		skt_sem;	/* protects socket h/w state */
-
-    struct task_struct		*thread;
-    struct completion		thread_done;
-    wait_queue_head_t		thread_wait;
-    spinlock_t			thread_lock;	/* protects thread_events */
-    unsigned int		thread_events;
-} socket_info_t;
-
 /* Flags in config state */
 #define CONFIG_LOCKED		0x01
 #define CONFIG_IRQ_REQ		0x02
@@ -187,7 +115,7 @@ typedef struct socket_info_t {
 #define CHECK_SOCKET(s) \
     (((s) >= sockets) || (socket_table[s]->ss_entry == NULL))
 
-#define SOCKET(h) (socket_table[(h)->Socket])
+#define SOCKET(h) (h->Socket)
 #define CONFIG(h) (&SOCKET(h)->config[(h)->Function])
 
 #define CHECK_REGION(r) \
@@ -200,19 +128,19 @@ typedef struct socket_info_t {
     ((h)->event_handler((e), (p), &(h)->event_callback_args))
 
 /* In cardbus.c */
-int cb_alloc(socket_info_t *s);
-void cb_free(socket_info_t *s);
-int read_cb_mem(socket_info_t *s, int space, u_int addr, u_int len, void *ptr);
+int cb_alloc(struct pcmcia_socket *s);
+void cb_free(struct pcmcia_socket *s);
+int read_cb_mem(struct pcmcia_socket *s, int space, u_int addr, u_int len, void *ptr);
 
 /* In cistpl.c */
-int read_cis_mem(socket_info_t *s, int attr,
+int read_cis_mem(struct pcmcia_socket *s, int attr,
 		 u_int addr, u_int len, void *ptr);
-void write_cis_mem(socket_info_t *s, int attr,
+void write_cis_mem(struct pcmcia_socket *s, int attr,
 		   u_int addr, u_int len, void *ptr);
-void release_cis_mem(socket_info_t *s);
-void destroy_cis_cache(socket_info_t *s);
-int verify_cis_cache(socket_info_t *s);
-void preload_cis_cache(socket_info_t *s);
+void release_cis_mem(struct pcmcia_socket *s);
+void destroy_cis_cache(struct pcmcia_socket *s);
+int verify_cis_cache(struct pcmcia_socket *s);
+void preload_cis_cache(struct pcmcia_socket *s);
 int get_first_tuple(client_handle_t handle, tuple_t *tuple);
 int get_next_tuple(client_handle_t handle, tuple_t *tuple);
 int get_tuple_data(client_handle_t handle, tuple_t *tuple);
@@ -236,11 +164,11 @@ int write_memory(memory_handle_t handle, mem_op_t *req, caddr_t buf);
 int copy_memory(memory_handle_t handle, copy_op_t *req);
 
 /* In rsrc_mgr */
-void validate_mem(socket_info_t *s);
+void validate_mem(struct pcmcia_socket *s);
 int find_io_region(ioaddr_t *base, ioaddr_t num, ioaddr_t align,
-		   char *name, socket_info_t *s);
+		   char *name, struct pcmcia_socket *s);
 int find_mem_region(u_long *base, u_long num, u_long align,
-		    int force_low, char *name, socket_info_t *s);
+		    int force_low, char *name, struct pcmcia_socket *s);
 int try_irq(u_int Attributes, int irq, int specific);
 void undo_irq(u_int Attributes, int irq);
 int adjust_resource_info(client_handle_t handle, adjust_t *adj);
@@ -250,9 +178,8 @@ int proc_read_io(char *buf, char **start, off_t pos,
 int proc_read_mem(char *buf, char **start, off_t pos,
 		  int count, int *eof, void *data);
 
-#define MAX_SOCK 8
-extern socket_t sockets;
-extern socket_info_t *socket_table[MAX_SOCK];
+extern struct rw_semaphore pcmcia_socket_list_rwsem;
+extern struct list_head pcmcia_socket_list;
 
 #ifdef CONFIG_PROC_FS
 extern struct proc_dir_entry *proc_pccard;

drivers/pcmcia/ds.c

@@ -107,8 +107,7 @@ struct pcmcia_bus_socket {
 	struct work_struct	removal;
 	socket_bind_t		*bind;
 	struct device		*socket_dev;
-	struct list_head	socket_list;
-	unsigned int		socket_no; /* deprecated */
+	struct pcmcia_socket	*parent;
 };
 
 #define SOCKET_PRESENT		0x01
@@ -122,10 +121,6 @@ static dev_info_t dev_info = "Driver Services";
 
 static int major_dev = -1;
 
-/* list of all sockets registered with the pcmcia bus driver */
-static DECLARE_RWSEM(bus_socket_list_rwsem);
-static LIST_HEAD(bus_socket_list);
-
 extern struct proc_dir_entry *proc_pccard;
 
 /*====================================================================*/
@@ -164,20 +159,6 @@ EXPORT_SYMBOL(pcmcia_register_driver);
  */
 void pcmcia_unregister_driver(struct pcmcia_driver *driver)
 {
-	socket_bind_t *b;
-	struct pcmcia_bus_socket *bus_sock;
-
-	if (driver->use_count > 0) {
-		/* Blank out any left-over device instances */
-		driver->attach = NULL; driver->detach = NULL;
-		down_read(&bus_socket_list_rwsem);
-		list_for_each_entry(bus_sock, &bus_socket_list, socket_list) {
-			for (b = bus_sock->bind; b; b = b->next)
-				if (b->driver == driver) 
-					b->instance = NULL;
-		}
-		up_read(&bus_socket_list_rwsem);
-	}
 	driver_unregister(&driver->drv);
 }
 EXPORT_SYMBOL(pcmcia_unregister_driver);
@@ -319,14 +300,14 @@ static int bind_mtd(struct pcmcia_bus_socket *bus_sock, mtd_info_t *mtd_info)
 
     bind_req.dev_info = &mtd_info->dev_info;
     bind_req.Attributes = mtd_info->Attributes;
-    bind_req.Socket = bus_sock->socket_no;
+    bind_req.Socket = bus_sock->parent;
     bind_req.CardOffset = mtd_info->CardOffset;
     ret = pcmcia_bind_mtd(&bind_req);
     if (ret != CS_SUCCESS) {
 	cs_error(NULL, BindMTD, ret);
 	printk(KERN_NOTICE "ds: unable to bind MTD '%s' to socket %d"
 	       " offset 0x%x\n",
-	       (char *)bind_req.dev_info, bus_sock->socket_no, bind_req.CardOffset);
+	       (char *)bind_req.dev_info, bus_sock->parent->sock, bind_req.CardOffset);
 	return -ENODEV;
     }
     return 0;
@@ -351,7 +332,7 @@ static int bind_request(struct pcmcia_bus_socket *s, bind_info_t *bind_info)
     if (!s)
 	    return -EINVAL;
 
-    DEBUG(2, "bind_request(%d, '%s')\n", s->socket_no,
+    DEBUG(2, "bind_request(%d, '%s')\n", s->parent->sock,
 	  (char *)bind_info->dev_info);
     driver = get_pcmcia_driver(&bind_info->dev_info);
     if (!driver)
@@ -366,14 +347,18 @@ static int bind_request(struct pcmcia_bus_socket *s, bind_info_t *bind_info)
 	return -EBUSY;
     }
 
-    bind_req.Socket = s->socket_no;
+    if (!try_module_get(driver->owner))
+	    return -EINVAL;
+
+    bind_req.Socket = s->parent;
     bind_req.Function = bind_info->function;
     bind_req.dev_info = (dev_info_t *) driver->drv.name;
     ret = pcmcia_bind_device(&bind_req);
     if (ret != CS_SUCCESS) {
 	cs_error(NULL, BindDevice, ret);
 	printk(KERN_NOTICE "ds: unable to bind '%s' to socket %d\n",
-	       (char *)dev_info, s->socket_no);
+	       (char *)dev_info, s->parent->sock);
+	module_put(driver->owner);
 	return -ENODEV;
     }
 
@@ -383,6 +368,7 @@ static int bind_request(struct pcmcia_bus_socket *s, bind_info_t *bind_info)
     if (!b) 
     {
     	driver->use_count--;
+	module_put(driver->owner);
 	return -ENOMEM;    
     }
     b->driver = driver;
@@ -396,6 +382,7 @@ static int bind_request(struct pcmcia_bus_socket *s, bind_info_t *bind_info)
 	if (b->instance == NULL) {
 	    printk(KERN_NOTICE "ds: unable to create instance "
 		   "of '%s'!\n", (char *)bind_info->dev_info);
+	    module_put(driver->owner);
 	    return -ENODEV;
 	}
     }
@@ -476,7 +463,7 @@ static int unbind_request(struct pcmcia_bus_socket *s, bind_info_t *bind_info)
 {
     socket_bind_t **b, *c;
 
-    DEBUG(2, "unbind_request(%d, '%s')\n", s->socket_no,
+    DEBUG(2, "unbind_request(%d, '%s')\n", s->parent->sock,
 	  (char *)bind_info->dev_info);
     for (b = &s->bind; *b; b = &(*b)->next)
 	if ((strcmp((char *)(*b)->driver->drv.name,
@@ -492,9 +479,9 @@ static int unbind_request(struct pcmcia_bus_socket *s, bind_info_t *bind_info)
 	if (c->instance)
 	    c->driver->detach(c->instance);
     }
+    module_put(c->driver->owner);
     *b = c->next;
     kfree(c);
-    
     return 0;
 } /* unbind_request */
 
@@ -832,13 +819,13 @@ static struct file_operations ds_fops = {
 	.poll		= ds_poll,
 };
 
-static int __devinit pcmcia_bus_add_socket(struct device *dev, unsigned int socket_nr)
+static int __devinit pcmcia_bus_add_socket(struct class_device *class_dev)
 {
+	struct pcmcia_socket *socket = class_dev->class_data;
 	client_reg_t client_reg;
 	bind_req_t bind;
-	struct pcmcia_bus_socket *s, *tmp_s;
+	struct pcmcia_bus_socket *s;
 	int ret;
-	int i;
 
 	s = kmalloc(sizeof(struct pcmcia_bus_socket), GFP_KERNEL);
 	if(!s)
@@ -855,28 +842,15 @@ static int __devinit pcmcia_bus_add_socket(struct device *dev, unsigned int sock
 	init_waitqueue_head(&s->queue);
 	init_waitqueue_head(&s->request);
 
-	/* find the lowest, unused socket no. Please note that this is a
-	 * temporary workaround until "struct pcmcia_socket" is introduced
-	 * into cs.c which will include this number, and which will be
-	 * accessible to ds.c directly */
-	i = 0;
- next_try:
-	list_for_each_entry(tmp_s, &bus_socket_list, socket_list) {
-		if (tmp_s->socket_no == i) {
-			i++;
-			goto next_try;
-		}
-	}
-	s->socket_no = i;
-
 	/* initialize data */
-	s->socket_dev = dev;
+	s->socket_dev = socket->dev.dev;
 	INIT_WORK(&s->removal, handle_removal, s);
-    
+	s->parent = socket;
+
 	/* Set up hotline to Card Services */
 	client_reg.dev_info = bind.dev_info = &dev_info;
 
-	bind.Socket = s->socket_no;
+	bind.Socket = socket;
 	bind.Function = BIND_FN_ALL;
 	ret = pcmcia_bind_device(&bind);
 	if (ret != CS_SUCCESS) {
@@ -901,50 +875,26 @@ static int __devinit pcmcia_bus_add_socket(struct device *dev, unsigned int sock
 		return -EINVAL;
 	}
 
-	list_add(&s->socket_list, &bus_socket_list);
+	socket->pcmcia = s;
 
 	return 0;
 }
 
 
-static int pcmcia_bus_add_socket_dev(struct class_device *class_dev)
-{
-	struct pcmcia_socket_class_data *cls_d = class_get_devdata(class_dev);
-	unsigned int i;
-	unsigned int ret = 0;
-
-	if (!cls_d)
-		return -ENODEV;
-
-	down_write(&bus_socket_list_rwsem);
-        for (i = 0; i < cls_d->nsock; i++)
-		ret += pcmcia_bus_add_socket(class_dev->dev, i);
-	up_write(&bus_socket_list_rwsem);
-
-	return ret;
-}
-
-static void pcmcia_bus_remove_socket_dev(struct class_device *class_dev)
+static void pcmcia_bus_remove_socket(struct class_device *class_dev)
 {
-	struct pcmcia_socket_class_data *cls_d = class_get_devdata(class_dev);
-	struct list_head *list_loop;
-	struct list_head *tmp_storage;
+	struct pcmcia_socket *socket = class_dev->class_data;
 
-	if (!cls_d)
+	if (!socket || !socket->pcmcia)
 		return;
 
 	flush_scheduled_work();
 
-	down_write(&bus_socket_list_rwsem);
-	list_for_each_safe(list_loop, tmp_storage, &bus_socket_list) {
-		struct pcmcia_bus_socket *bus_sock = container_of(list_loop, struct pcmcia_bus_socket, socket_list);
-		if (bus_sock->socket_dev == class_dev->dev) {
-			pcmcia_deregister_client(bus_sock->handle);
-			list_del(&bus_sock->socket_list);
-			kfree(bus_sock);
-		}
-	}
-	up_write(&bus_socket_list_rwsem);
+	pcmcia_deregister_client(socket->pcmcia->handle);
+
+	kfree(socket->pcmcia);
+	socket->pcmcia = NULL;
+
 	return;
 }
 
@@ -952,8 +902,8 @@ static void pcmcia_bus_remove_socket_dev(struct class_device *class_dev)
 /* the pcmcia_bus_interface is used to handle pcmcia socket devices */
 static struct class_interface pcmcia_bus_interface = {
 	.class = &pcmcia_socket_class,
-	.add = &pcmcia_bus_add_socket_dev,
-	.remove = &pcmcia_bus_remove_socket_dev,
+	.add = &pcmcia_bus_add_socket,
+	.remove = &pcmcia_bus_remove_socket,
 };
 
 
@@ -1008,18 +958,13 @@ module_exit(exit_pcmcia_bus);
 
 /* helpers for backwards-compatible functions */
 
-
 static struct pcmcia_bus_socket * get_socket_info_by_nr(unsigned int nr)
 {
-	struct pcmcia_bus_socket * s;
-	down_read(&bus_socket_list_rwsem);
-	list_for_each_entry(s, &bus_socket_list, socket_list)
-		if (s->socket_no == nr) {
-			up_read(&bus_socket_list_rwsem);
-			return s;
-		}
-	up_read(&bus_socket_list_rwsem);
-	return NULL;
+	struct pcmcia_socket * s = pcmcia_get_socket_by_nr(nr);
+	if (s && s->pcmcia)
+		return s->pcmcia;
+	else
+		return NULL;
 }
 
 /* backwards-compatible accessing of driver --- by name! */

drivers/pcmcia/i82092aa.h

@@ -28,16 +28,16 @@ static irqreturn_t i82092aa_interrupt(int irq, void *dev, struct pt_regs *regs);
 
 
 
-static int i82092aa_get_status(unsigned int sock, u_int *value);
-static int i82092aa_get_socket(unsigned int sock, socket_state_t *state);
-static int i82092aa_set_socket(unsigned int sock, socket_state_t *state);
-static int i82092aa_set_io_map(unsigned int sock, struct pccard_io_map *io);
-static int i82092aa_set_mem_map(unsigned int sock, struct pccard_mem_map *mem);
-static int i82092aa_init(unsigned int s);
-static int i82092aa_suspend(unsigned int sock);
-static int i82092aa_register_callback(unsigned int sock, void (*handler)(void *, unsigned int), void * info);
-static int i82092aa_inquire_socket(unsigned int sock, socket_cap_t *cap);
-static void i82092aa_proc_setup(unsigned int sock, struct proc_dir_entry *base);
+static int i82092aa_get_status(struct pcmcia_socket *socket, u_int *value);
+static int i82092aa_get_socket(struct pcmcia_socket *socket, socket_state_t *state);
+static int i82092aa_set_socket(struct pcmcia_socket *socket, socket_state_t *state);
+static int i82092aa_set_io_map(struct pcmcia_socket *socket, struct pccard_io_map *io);
+static int i82092aa_set_mem_map(struct pcmcia_socket *socket, struct pccard_mem_map *mem);
+static int i82092aa_init(struct pcmcia_socket *socket);
+static int i82092aa_suspend(struct pcmcia_socket *socket);
+static int i82092aa_register_callback(struct pcmcia_socket *socket, void (*handler)(void *, unsigned int), void * info);
+static int i82092aa_inquire_socket(struct pcmcia_socket *socket, socket_cap_t *cap);
+static void i82092aa_proc_setup(struct pcmcia_socket *socket, struct proc_dir_entry *base);
 
 #endif
 

drivers/pcmcia/pci_socket.h

-/*
- * drivers/pcmcia/pci_socket.h
- *
- * (C) Copyright 1999 Linus Torvalds
- */
-
-#ifndef __PCI_SOCKET_H
-#define __PCI_SOCKET_H
-
-struct pci_socket_ops;
-struct socket_info_t;
-
-typedef struct pci_socket {
-	struct pci_dev *dev;
-	int cb_irq, io_irq;
-	void *base;
-	void (*handler)(void *, unsigned int);
-	void *info;
-	struct pci_socket_ops *op;
-	socket_cap_t cap;
-	spinlock_t event_lock;
-	unsigned int events;
-	struct work_struct tq_task;
-	struct timer_list poll_timer;
-
-	struct pcmcia_socket_class_data cls_d;
-	/* A few words of private data for the low-level driver.. */
-	unsigned int private[8];
-} pci_socket_t;
-
-struct pci_socket_ops {
-	int (*open)(struct pci_socket *);
-	void (*close)(struct pci_socket *);
-
-	int (*init)(struct pci_socket *);
-	int (*suspend)(struct pci_socket *);
-	int (*get_status)(struct pci_socket *, unsigned int *);
-	int (*get_socket)(struct pci_socket *, socket_state_t *);
-	int (*set_socket)(struct pci_socket *, socket_state_t *);
-	int (*set_io_map)(struct pci_socket *, struct pccard_io_map *);
-	int (*set_mem_map)(struct pci_socket *, struct pccard_mem_map *);
-	void (*proc_setup)(struct pci_socket *, struct proc_dir_entry *base);
-};
-
-extern struct pci_socket_ops yenta_operations;
-extern struct pci_socket_ops ricoh_operations;
-
-#endif

drivers/pcmcia/sa1100_generic.c

@@ -106,19 +106,10 @@ static struct device_driver sa11x0_pcmcia_driver = {
 	.remove		= sa11xx_drv_pcmcia_remove,
 	.name		= "sa11x0-pcmcia",
 	.bus		= &platform_bus_type,
-	.devclass	= &pcmcia_socket_class,
 	.suspend 	= pcmcia_socket_dev_suspend,
 	.resume 	= pcmcia_socket_dev_resume,
 };
 
-static struct platform_device sa11x0_pcmcia_device = {
-	.name		= "sa11x0-pcmcia",
-	.id		= 0,
-	.dev		= {
-		.name	= "Intel Corporation SA11x0 [PCMCIA]",
-	},
-};
-
 /* sa11x0_pcmcia_init()
  * ^^^^^^^^^^^^^^^^^^^^
  *
@@ -129,16 +120,7 @@ static struct platform_device sa11x0_pcmcia_device = {
  */
 static int __init sa11x0_pcmcia_init(void)
 {
-	int ret;
-
-	ret = driver_register(&sa11x0_pcmcia_driver);
-	if (ret == 0) {
-		ret = platform_device_register(&sa11x0_pcmcia_device);
-		if (ret)
-			driver_unregister(&sa11x0_pcmcia_driver);
-	}
-
-	return ret;
+	return driver_register(&sa11x0_pcmcia_driver);
 }
 
 /* sa11x0_pcmcia_exit()
@@ -148,7 +130,6 @@ static int __init sa11x0_pcmcia_init(void)
  */
 static void __exit sa11x0_pcmcia_exit(void)
 {
-	platform_device_unregister(&sa11x0_pcmcia_device);
 	driver_unregister(&sa11x0_pcmcia_driver);
 }
 

drivers/pcmcia/sa11xx_core.h

@@ -44,6 +44,8 @@ struct pcmcia_state {
  * use when responding to a Card Services query of some kind.
  */
 struct sa1100_pcmcia_socket {
+	struct pcmcia_socket	socket;
+
 	/*
 	 * Info from low level handler
 	 */