Commit fcb4c5ee authored by Lars-Peter Clausen's avatar Lars-Peter Clausen Committed by Archit Taneja

drm/bridge: adv7511: Remove private copy of the EDID

The adv7511 driver keeps a private copy of the EDID in its driver state
struct. But this copy is only used in adv7511_get_modes() where it is also
retrieved, so there is no need to keep this extra copy around.

If a need to access the EDID elsewhere in the driver ever arises the copy
that is stored in the connector can be used. This copy is accessible
through drm_connector_get_edid().

Note, this patch removes the NULL check of the EDID before passing it to
drm_detect_hdmi_monitor(), but that is fine since the function correctly
handles the case where the EDID is NULL.
Signed-off-by: default avatarLars-Peter Clausen <lars@metafoo.de>
Tested-by: default avatarJohn Stultz <john.stultz@linaro.org>
Signed-off-by: default avatarArchit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20170905121018.11477-2-lars@metafoo.de
parent 6f39ed4f
......@@ -328,8 +328,6 @@ struct adv7511 {
enum adv7511_sync_polarity hsync_polarity;
bool rgb;
struct edid *edid;
struct gpio_desc *gpio_pd;
struct regulator_bulk_data *supplies;
......
......@@ -199,17 +199,14 @@ static const uint16_t adv7511_csc_ycbcr_to_rgb[] = {
static void adv7511_set_config_csc(struct adv7511 *adv7511,
struct drm_connector *connector,
bool rgb)
bool rgb, bool hdmi_mode)
{
struct adv7511_video_config config;
bool output_format_422, output_format_ycbcr;
unsigned int mode;
uint8_t infoframe[17];
if (adv7511->edid)
config.hdmi_mode = drm_detect_hdmi_monitor(adv7511->edid);
else
config.hdmi_mode = false;
config.hdmi_mode = hdmi_mode;
hdmi_avi_infoframe_init(&config.avi_infoframe);
......@@ -589,13 +586,14 @@ static int adv7511_get_modes(struct adv7511 *adv7511,
if (!adv7511->powered)
__adv7511_power_off(adv7511);
kfree(adv7511->edid);
adv7511->edid = edid;
drm_mode_connector_update_edid_property(connector, edid);
count = drm_add_edid_modes(connector, edid);
adv7511_set_config_csc(adv7511, connector, adv7511->rgb);
adv7511_set_config_csc(adv7511, connector, adv7511->rgb,
drm_detect_hdmi_monitor(edid));
kfree(edid);
return count;
}
......@@ -1156,8 +1154,6 @@ static int adv7511_remove(struct i2c_client *i2c)
i2c_unregister_device(adv7511->i2c_edid);
kfree(adv7511->edid);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment