Skip to content

L
linux
Commit fcbcfef5 authored by Russell King's avatar Russell King
Browse files
Options

[ARM] Miscellaneous updates 

- Fix missed cli()/sti() conversions.
- Fix SA1100 sleep code.
- Update small_page.c for changes to struct page.
- Clean up assabet/neponset initialisation.
- Clean up compiler warnings in iop310 build.
- Add missed bits from previous xscale cset.
parent 89c248f7
Show whitespace changes
Inline Side-by-side
Showing with 560 additions and 384 deletions
arch/arm/config.in
View file @ fcbcfef5
......@@ -153,18 +153,15 @@ if [ "$CONFIG_ARCH_EP7211" = "y" -o \
fi
endmenu
if [ "$CONFIG_ARCH_IOP310" = "y" ]; then
mainmenu_option next_comment
comment 'IOP310 Implementation Options'
choice 'IOP310 System Type' \
"IQ80310 CONFIG_ARCH_IQ80310" IQ80310
comment 'IOP310 Chipset Features'
bool 'Support Intel 80312 Application Accelerator Unit (EXPERIMENTAL)' CONFIG_IOP310_AAU
bool 'Support Intel 80312 DMA (EXPERIMENTAL)' CONFIG_IOP310_DMA
bool 'Support Intel 80312 Messaging Unit (EXPERIMENTAL)' CONFIG_IOP310_MU
bool 'Support Intel 80312 Performance Monitor (EXPERIMENTAL)' CONFIG_IOP310_PMON
endmenu
fi
mainmenu_option next_comment
comment 'IOP310 Implementation Options'
dep_bool ' IQ80310' CONFIG_ARCH_IQ80310 $CONFIG_ARCH_IOP310
comment 'IOP310 Chipset Features'
dep_bool 'Support Intel 80312 Application Accelerator Unit (EXPERIMENTAL)' CONFIG_IOP310_AAU $CONFIG_ARCH_IOP310 $CONFIG_EXPERIMENTAL
dep_bool 'Support Intel 80312 DMA (EXPERIMENTAL)' CONFIG_IOP310_DMA $CONFIG_ARCH_IOP310 $CONFIG_EXPERIMENTAL
dep_bool 'Support Intel 80312 Messaging Unit (EXPERIMENTAL)' CONFIG_IOP310_MU $CONFIG_ARCH_IOP310 $CONFIG_EXPERIMENTAL
dep_bool 'Support Intel 80312 Performance Monitor (EXPERIMENTAL)' CONFIG_IOP310_PMON $CONFIG_ARCH_IOP310 $CONFIG_EXPERIMENTAL
endmenu
# Definitions to make life easier
if [ "$CONFIG_ARCH_ARCA5K" = "y" -o \
......
arch/arm/def-configs/neponset
View file @ fcbcfef5
......@@ -15,7 +15,14 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
# CONFIG_OBSOLETE is not set
#
# General setup
#
CONFIG_NET=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
#
# Loadable module support
......@@ -27,6 +34,7 @@ CONFIG_MODULES=y
#
# System Type
#
# CONFIG_ARCH_ADIFCC is not set
# CONFIG_ARCH_ANAKIN is not set
# CONFIG_ARCH_ARCA5K is not set
# CONFIG_ARCH_CLPS7500 is not set
......@@ -36,6 +44,7 @@ CONFIG_MODULES=y
# CONFIG_ARCH_CAMELOT is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP310 is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_RPC is not set
CONFIG_ARCH_SA1100=y
......@@ -68,12 +77,16 @@ CONFIG_ASSABET_NEPONSET=y
# CONFIG_SA1100_ADSBITSY is not set
# CONFIG_SA1100_BRUTUS is not set
# CONFIG_SA1100_CERF is not set
# CONFIG_SA1100_H3100 is not set
# CONFIG_SA1100_H3600 is not set
# CONFIG_SA1100_H3800 is not set
# CONFIG_SA1100_H3XXX is not set
# CONFIG_SA1100_EXTENEX1 is not set
# CONFIG_SA1100_FLEXANET is not set
# CONFIG_SA1100_FREEBIRD is not set
# CONFIG_SA1100_GRAPHICSCLIENT is not set
# CONFIG_SA1100_GRAPHICSMASTER is not set
# CONFIG_SA1100_BADGE4 is not set
# CONFIG_SA1100_JORNADA720 is not set
# CONFIG_SA1100_HUW_WEBPANEL is not set
# CONFIG_SA1100_ITSY is not set
......@@ -82,27 +95,46 @@ CONFIG_ASSABET_NEPONSET=y
# CONFIG_SA1100_OMNIMETER is not set
# CONFIG_SA1100_PANGOLIN is not set
# CONFIG_SA1100_PLEB is not set
# CONFIG_SA1100_PT_SYSTEM3 is not set
# CONFIG_SA1100_SHANNON is not set
# CONFIG_SA1100_SHERMAN is not set
# CONFIG_SA1100_SIMPAD is not set
# CONFIG_SA1100_PFS168 is not set
# CONFIG_SA1100_VICTOR is not set
# CONFIG_SA1100_XP860 is not set
# CONFIG_SA1100_YOPY is not set
# CONFIG_SA1100_STORK is not set
CONFIG_SA1111=y
CONFIG_FORCE_MAX_ZONEORDER=9
CONFIG_SA1100_USB=m
CONFIG_SA1100_USB_NETLINK=m
CONFIG_SA1100_USB_CHAR=m
# CONFIG_SA1100_USB is not set
# CONFIG_SA1100_USB_NETLINK is not set
# CONFIG_SA1100_USB_CHAR is not set
# CONFIG_H3600_SLEEVE is not set
#
# CLPS711X/EP721X Implementations
#
# CONFIG_ARCH_AUTCPU12 is not set
# CONFIG_ARCH_CDB89712 is not set
# CONFIG_ARCH_CLEP7312 is not set
# CONFIG_ARCH_EDB7211 is not set
# CONFIG_ARCH_P720T is not set
# CONFIG_ARCH_FORTUNET is not set
# CONFIG_ARCH_EP7211 is not set
# CONFIG_ARCH_EP7212 is not set
#
# IOP310 Implementation Options
#
# CONFIG_ARCH_IQ80310 is not set
#
# IOP310 Chipset Features
#
# CONFIG_IOP310_AAU is not set
# CONFIG_IOP310_DMA is not set
# CONFIG_IOP310_MU is not set
# CONFIG_IOP310_PMON is not set
# CONFIG_ARCH_ACORN is not set
# CONFIG_FOOTBRIDGE is not set
# CONFIG_FOOTBRIDGE_HOST is not set
......@@ -115,22 +147,34 @@ CONFIG_CPU_32=y
#
# CONFIG_CPU_32v3 is not set
CONFIG_CPU_32v4=y
# CONFIG_CPU_32v5 is not set
# CONFIG_CPU_ARM610 is not set
# CONFIG_CPU_ARM710 is not set
# CONFIG_CPU_ARM720T is not set
# CONFIG_CPU_ARM920T is not set
# CONFIG_CPU_ARM922T is not set
# CONFIG_CPU_ARM926T is not set
# CONFIG_CPU_ARM1020 is not set
# CONFIG_CPU_SA110 is not set
CONFIG_CPU_SA1100=y
# CONFIG_ARM_THUMB is not set
CONFIG_DISCONTIGMEM=y
# CONFIG_CPU_XSCALE is not set
# CONFIG_XSCALE_PMU is not set
#
# Processor Features
#
#
# General setup
#
CONFIG_DISCONTIGMEM=y
# CONFIG_PCI is not set
CONFIG_ISA=y
# CONFIG_ISA_DMA is not set
# CONFIG_FIQ is not set
# CONFIG_ZBOOT_ROM is not set
CONFIG_ZBOOT_ROM_TEXT=0
CONFIG_ZBOOT_ROM_BSS=0
CONFIG_CPU_FREQ=y
CONFIG_HOTPLUG=y
......@@ -138,14 +182,12 @@ CONFIG_HOTPLUG=y
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
CONFIG_PCMCIA_PROBE=y
# CONFIG_I82092 is not set
# CONFIG_I82365 is not set
# CONFIG_TCIC is not set
# CONFIG_PCMCIA_CLPS6700 is not set
CONFIG_PCMCIA_SA1100=y
CONFIG_NET=y
CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
#
# At least one math emulation must be selected
......@@ -154,12 +196,14 @@ CONFIG_FPE_NWFPE=y
# CONFIG_FPE_FASTFPE is not set
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
# CONFIG_BINFMT_AOUT is not set
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set
# CONFIG_PM is not set
CONFIG_PM=y
# CONFIG_PREEMPT is not set
CONFIG_APM=y
# CONFIG_ARTHUR is not set
CONFIG_CMDLINE=""
CONFIG_CMDLINE="console=ttySA0,38400n8 console=tty1 cpufreq=221200 rw root=/dev/mtdblock3 load_ramdisk=1 prompt_ramdisk=0 mem=32M noinitrd initrd=0xc0800000,3M profile=2"
CONFIG_LEDS=y
CONFIG_LEDS_TIMER=y
CONFIG_LEDS_CPU=y
......@@ -173,30 +217,34 @@ CONFIG_ALIGNMENT_TRAP=y
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_PARTITIONS=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_BOOTLDR_PARTS=m
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_REDBOOT_PARTS=y
# CONFIG_MTD_BOOTLDR_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
# CONFIG_MTD_BLOCK_RO is not set
# CONFIG_MTD_CHAR is not set
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=m
# CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_CFI_INTELEXT=y
# CONFIG_MTD_CFI_AMDSTD is not set
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
......@@ -213,9 +261,12 @@ CONFIG_MTD_CFI_INTELEXT=m
# CONFIG_MTD_NORA is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_CDB89712 is not set
CONFIG_MTD_SA1100=m
CONFIG_MTD_SA1100=y
# CONFIG_MTD_2PARTS_IPAQ is not set
# CONFIG_MTD_DC21285 is not set
# CONFIG_MTD_IQ80310 is not set
# CONFIG_MTD_EPXA10DB is not set
# CONFIG_MTD_FORTUNET is not set
# CONFIG_MTD_PCI is not set
#
......@@ -256,10 +307,11 @@ CONFIG_MTD_SA1100=m
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_CISS_SCSI_TAPE is not set
# CONFIG_BLK_DEV_DAC960 is not set
CONFIG_BLK_DEV_LOOP=m
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=4096
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_INITRD=y
#
......@@ -277,8 +329,9 @@ CONFIG_BLK_DEV_INITRD=y
#
# Networking options
#
# CONFIG_PACKET is not set
# CONFIG_NETLINK is not set
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
# CONFIG_NETFILTER is not set
# CONFIG_FILTER is not set
CONFIG_UNIX=y
......@@ -288,17 +341,24 @@ CONFIG_INET=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_INET_ECN is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_IPV6 is not set
# CONFIG_KHTTPD is not set
# CONFIG_ATM is not set
# CONFIG_VLAN_8021Q is not set
#
#
#
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
#
# Appletalk devices
#
# CONFIG_DEV_APPLETALK is not set
# CONFIG_DECNET is not set
# CONFIG_BRIDGE is not set
# CONFIG_X25 is not set
......@@ -328,6 +388,7 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_ETHERTAP is not set
#
# Ethernet (10 or 100Mbit)
......@@ -337,7 +398,6 @@ CONFIG_NET_ETHERNET=y
# CONFIG_SUNLANCE is not set
# CONFIG_SUNBMAC is not set
# CONFIG_SUNQE is not set
# CONFIG_SUNLANCE is not set
# CONFIG_SUNGEM is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
......@@ -360,11 +420,13 @@ CONFIG_SMC9194=y
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_MYRI_SBUS is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
......@@ -389,6 +451,11 @@ CONFIG_SMC9194=y
#
# CONFIG_WAN is not set
#
# Tulip family network device support
#
# CONFIG_NET_TULIP is not set
#
# PCMCIA network device support
#
......@@ -400,6 +467,7 @@ CONFIG_PCMCIA_PCNET=y
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_ARCNET_COM20020_CS is not set
# CONFIG_PCMCIA_IBMTR is not set
# CONFIG_NET_PCMCIA_RADIO is not set
......@@ -417,38 +485,8 @@ CONFIG_PCMCIA_PCNET=y
#
# ATA/IDE/MFM/RLL support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=y
# CONFIG_BLK_DEV_IDECD is not set
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_BLK_DEV_IDESCSI is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_ISAPNP is not set
# CONFIG_IDE_CHIPSETS is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_IDE_MODES is not set
# CONFIG_BLK_DEV_ATARAID is not set
# CONFIG_BLK_DEV_ATARAID_PDC is not set
# CONFIG_BLK_DEV_ATARAID_HPT is not set
#
# SCSI support
......@@ -467,37 +505,131 @@ CONFIG_BLK_DEV_IDECS=y
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
# CONFIG_ISDN_BOOL is not set
#
# Input core support
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_KEYBDEV=y
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_MOUSEDEV is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_TSLIBDEV=y
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
#
# Input I/O drivers
#
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_INPUT_EMU10K1 is not set
# CONFIG_GAMEPORT_VORTEX is not set
# CONFIG_GAMEPORT_FM801 is not set
# CONFIG_GAMEPORT_CS461x is not set
CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_SA1111=y
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_PS2SERKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE_USB is not set
# CONFIG_JOYSTICK_IFORCE_232 is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDDLER is not set
# CONFIG_JOYSTICK_DB9 is not set
# CONFIG_JOYSTICK_GAMECON is not set
# CONFIG_JOYSTICK_TURBOGRAFX is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_GUNZE is not set
#
# Character devices
#
CONFIG_VT=y
# CONFIG_VT_CONSOLE is not set
# CONFIG_SERIAL is not set
# CONFIG_SERIAL_EXTENDED is not set
# CONFIG_SERIAL_NONSTANDARD is not set
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_DIGI is not set
# CONFIG_ESPSERIAL is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
# CONFIG_SERIAL_8250_CONSOLE is not set
CONFIG_SERIAL_8250_CS=y
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_RSA is not set
#
# Non-8250 serial port support
#
# CONFIG_ATOMWIDE_SERIAL is not set
# CONFIG_DUALSP_SERIAL is not set
# CONFIG_SERIAL_ANAKIN is not set
# CONFIG_SERIAL_ANAKIN_CONSOLE is not set
# CONFIG_SERIAL_AMBA is not set
# CONFIG_SERIAL_AMBA_CONSOLE is not set
# CONFIG_SERIAL_CLPS711X is not set
# CONFIG_SERIAL_CLPS711X_CONSOLE is not set
# CONFIG_SERIAL_CLPS711X_OLD_NAME is not set
# CONFIG_SERIAL_21285 is not set
# CONFIG_SERIAL_21285_OLD is not set
# CONFIG_SERIAL_21285_CONSOLE is not set
......@@ -505,15 +637,6 @@ CONFIG_VT=y
# CONFIG_SERIAL_UART00_CONSOLE is not set
CONFIG_SERIAL_SA1100=y
CONFIG_SERIAL_SA1100_CONSOLE=y
CONFIG_SA1100_DEFAULT_BAUDRATE=9600
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_CONSOLE is not set
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_MANY_PORTS is not set
# CONFIG_SERIAL_8250_SHARE_IRQ is not set
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_MULTIPORT is not set
# CONFIG_SERIAL_8250_HUB6 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
......@@ -522,71 +645,61 @@ CONFIG_UNIX98_PTY_COUNT=32
#
# I2C support
#
# CONFIG_I2C is not set
CONFIG_I2C=y
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_PHILIPSPAR is not set
# CONFIG_I2C_ELV is not set
# CONFIG_I2C_VELLEMAN is not set
CONFIG_I2C_BIT_SA1100_GPIO=y
# CONFIG_I2C_ALGOPCF is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_PROC=y
#
# L3 serial bus support
#
# CONFIG_L3 is not set
# CONFIG_L3_ALGOBIT is not set
# CONFIG_L3_BIT_SA1100_GPIO is not set
CONFIG_L3=y
CONFIG_L3_ALGOBIT=y
CONFIG_L3_BIT_SA1100_GPIO=y
#
# Other L3 adapters
#
# CONFIG_L3_SA1111 is not set
# CONFIG_BIT_SA1100_GPIO is not set
CONFIG_L3_SA1111=y
CONFIG_BIT_SA1100_GPIO=y
#
# Mice
#
# CONFIG_BUSMOUSE is not set
# CONFIG_MOUSE is not set
#
# Joysticks
#
# CONFIG_INPUT_GAMEPORT is not set
# CONFIG_INPUT_NS558 is not set
# CONFIG_INPUT_LIGHTNING is not set
# CONFIG_INPUT_PCIGAME is not set
# CONFIG_INPUT_CS461X is not set
# CONFIG_INPUT_EMU10K1 is not set
# CONFIG_INPUT_SERIO is not set
# CONFIG_INPUT_SERPORT is not set
#
# Joysticks
#
# CONFIG_INPUT_ANALOG is not set
# CONFIG_INPUT_A3D is not set
# CONFIG_INPUT_ADI is not set
# CONFIG_INPUT_COBRA is not set
# CONFIG_INPUT_GF2K is not set
# CONFIG_INPUT_GRIP is not set
# CONFIG_INPUT_INTERACT is not set
# CONFIG_INPUT_TMDC is not set
# CONFIG_INPUT_SIDEWINDER is not set
# CONFIG_INPUT_IFORCE_USB is not set
# CONFIG_INPUT_IFORCE_232 is not set
# CONFIG_INPUT_WARRIOR is not set
# CONFIG_INPUT_MAGELLAN is not set
# CONFIG_INPUT_SPACEORB is not set
# CONFIG_INPUT_SPACEBALL is not set
# CONFIG_INPUT_STINGER is not set
# CONFIG_INPUT_DB9 is not set
# CONFIG_INPUT_GAMECON is not set
# CONFIG_INPUT_TURBOGRAFX is not set
# CONFIG_QIC02_TAPE is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_WDT is not set
# CONFIG_WDTPCI is not set
# CONFIG_PCWATCHDOG is not set
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_21285_WATCHDOG is not set
# CONFIG_977_WATCHDOG is not set
CONFIG_SA1100_WATCHDOG=m
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_I810_TCO is not set
# CONFIG_MIXCOMWD is not set
# CONFIG_60XX_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_INTEL_RNG is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_SA1100_RTC is not set
CONFIG_SA1100_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
......@@ -601,8 +714,7 @@ CONFIG_UNIX98_PTY_COUNT=32
#
# PCMCIA character devices
#
CONFIG_PCMCIA_SERIAL_CS=m
# CONFIG_MWAVE is not set
# CONFIG_SYNCLINK_CS is not set
#
# Multimedia devices
......@@ -613,35 +725,41 @@ CONFIG_PCMCIA_SERIAL_CS=m
# File systems
#
# CONFIG_QUOTA is not set
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_ADFS_FS is not set
# CONFIG_ADFS_FS_RW is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_CMS_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_JBD_DEBUG is not set
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
# CONFIG_UMSDOS_FS is not set
# CONFIG_VFAT_FS is not set
CONFIG_VFAT_FS=m
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_NAND is not set
# CONFIG_CRAMFS is not set
# CONFIG_TMPFS is not set
# CONFIG_RAMFS is not set
CONFIG_RAMFS=y
# CONFIG_ISO9660_FS is not set
# CONFIG_JOLIET is not set
# CONFIG_ZISOFS is not set
# CONFIG_JFS_FS is not set
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_FREEVXFS_FS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_NTFS_FS is not set
# CONFIG_NTFS_DEBUG is not set
# CONFIG_HPFS_FS is not set
......@@ -670,8 +788,10 @@ CONFIG_NFS_FS=y
# CONFIG_ROOT_NFS is not set
# CONFIG_NFSD is not set
# CONFIG_NFSD_V3 is not set
# CONFIG_NFSD_TCP is not set
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
# CONFIG_EXPORTFS is not set
# CONFIG_SMB_FS is not set
# CONFIG_NCP_FS is not set
# CONFIG_NCPFS_PACKET_SIGNING is not set
......@@ -683,7 +803,6 @@ CONFIG_LOCKD=y
# CONFIG_NCPFS_NLS is not set
# CONFIG_NCPFS_EXTRAS is not set
# CONFIG_ZISOFS_FS is not set
# CONFIG_ZLIB_FS_INFLATE is not set
#
# Partition Types
......@@ -694,15 +813,12 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_MSDOS_PARTITION is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SMB_NLS is not set
CONFIG_NLS=y
......@@ -710,7 +826,7 @@ CONFIG_NLS=y
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
......@@ -731,8 +847,9 @@ CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ISO8859_1 is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
......@@ -771,16 +888,21 @@ CONFIG_FBCON_CFB8=y
CONFIG_FBCON_CFB16=y
CONFIG_FBCON_FONTWIDTH8_ONLY=y
CONFIG_FBCON_FONTS=y
CONFIG_FONT_8x8=y
# CONFIG_FONT_8x8 is not set
# CONFIG_FONT_8x16 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_ACORN_8x8=y
#
# Sound
#
CONFIG_SOUND=y
#
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_BT878 is not set
# CONFIG_SOUND_CMPCI is not set
# CONFIG_SOUND_EMU10K1 is not set
......@@ -801,16 +923,23 @@ CONFIG_SOUND=y
# CONFIG_SOUND_VIA82CXXX is not set
# CONFIG_MIDI_VIA82CXXX is not set
CONFIG_SOUND_SA1100=y
# CONFIG_SOUND_UDA1341 is not set
# CONFIG_SOUND_ASSABET_UDA1341 is not set
CONFIG_SOUND_UDA1341=y
CONFIG_SOUND_ASSABET_UDA1341=y
# CONFIG_SOUND_H3600_UDA1341 is not set
# CONFIG_SOUND_PANGOLIN_UDA1341 is not set
# CONFIG_SOUND_SA1111_UDA1341 is not set
CONFIG_SOUND_SA1111_UDA1341=y
# CONFIG_SOUND_STORK_UDA1341 is not set
# CONFIG_SOUND_SA1100SSP is not set
# CONFIG_SOUND_STORK_AC97 is not set
# CONFIG_SOUND_OSS is not set
# CONFIG_SOUND_WAVEARTIST is not set
# CONFIG_SOUND_TVMIXER is not set
#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set
#
# Multimedia Capabilities Port drivers
#
......@@ -823,37 +952,43 @@ CONFIG_MCP_UCB1200_TS=y
#
# Console Switches
#
CONFIG_SWITCHES=y
CONFIG_SWITCHES_SA1100=y
CONFIG_SWITCHES_UCB1X00=y
# CONFIG_SWITCHES is not set
#
# USB support
#
CONFIG_USB=y
CONFIG_USB=m
CONFIG_USB_DEBUG=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DEVICEFS is not set
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_LONG_TIMEOUT is not set
# CONFIG_USB_LARGE_CONFIG is not set
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
#
# USB Controllers
# USB Host Controller Drivers
#
# CONFIG_USB_UHCI is not set
# CONFIG_USB_UHCI_ALT is not set
# CONFIG_USB_OHCI is not set
CONFIG_USB_OHCI_SA1111=y
# CONFIG_USB_EHCI_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD_ALT is not set
CONFIG_USB_OHCI_SA1111=m
# CONFIG_USB_SL811HS is not set
#
# USB Device Class drivers
#
# CONFIG_USB_AUDIO is not set
# CONFIG_USB_BLUETOOTH is not set
# CONFIG_USB_BLUETOOTH_TTY is not set
# CONFIG_USB_MIDI is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# SCSI support is needed for USB Storage
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
......@@ -862,21 +997,23 @@ CONFIG_USB_OHCI_SA1111=y
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_HP8200e is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=y
# CONFIG_USB_HID is not set
# CONFIG_USB_HIDINPUT is not set
# CONFIG_USB_HIDDEV is not set
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
#
# USB Imaging devices
#
# CONFIG_USB_DC2XX is not set
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_SCANNER is not set
# CONFIG_USB_MICROTEK is not set
......@@ -885,18 +1022,28 @@ CONFIG_USB_HID=y
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
# CONFIG_USB_VICAM is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_IBMCAM is not set
# CONFIG_USB_KONICAWC is not set
# CONFIG_USB_OV511 is not set
# CONFIG_USB_PWC is not set
# CONFIG_USB_SE401 is not set
# CONFIG_USB_STV680 is not set
#
# USB Network adaptors
#
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_CATC is not set
# CONFIG_USB_CDCETHER is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
#
......@@ -915,6 +1062,7 @@ CONFIG_USB_HID=y
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
......@@ -926,9 +1074,14 @@ CONFIG_USB_HID=y
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OMNINET is not set
......@@ -936,8 +1089,11 @@ CONFIG_USB_HID=y
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_TIGL is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_ID75 is not set
# CONFIG_USB_BRLVGER is not set
#
# Bluetooth support
......@@ -948,13 +1104,22 @@ CONFIG_USB_HID=y
# Kernel hacking
#
# CONFIG_NO_FRAME_POINTER is not set
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_USER=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SLAB=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_NO_PGT_CACHE is not set
# CONFIG_DEBUG_LL is not set
# CONFIG_DEBUG_WAITQ is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
# CONFIG_DEBUG_DC21285_PORT is not set
# CONFIG_DEBUG_CLPS711X_UART2 is not set
#
# Library routines
#
# CONFIG_CRC32 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
arch/arm/mach-arc/small_page.c
View file @ fcbcfef5
......@@ -50,7 +50,7 @@
*/
struct order {
struct page *queue;
struct list_head queue;
unsigned int mask; /* (1 << shift) - 1 */
unsigned int shift; /* (1 << shift) size of page */
unsigned int block_mask; /* nr_blocks - 1 */
......@@ -60,10 +60,10 @@ struct order {
static struct order orders[] = {
#if PAGE_SIZE == 4096
{ NULL, 2047, 11, 1, 0x00000003 }
{ LIST_HEAD_INIT(orders[0].queue), 2047, 11, 1, 0x00000003 }
#elif PAGE_SIZE == 32768
{ NULL, 2047, 11, 15, 0x0000ffff },
{ NULL, 8191, 13, 3, 0x0000000f }
{ LIST_HEAD_INIT(orders[0].queue), 2047, 11, 15, 0x0000ffff },
{ LIST_HEAD_INIT(orders[1].queue), 8191, 13, 3, 0x0000000f }
#else
#error unsupported page size
#endif
......@@ -75,40 +75,19 @@ static struct order orders[] = {
static spinlock_t small_page_lock = SPIN_LOCK_UNLOCKED;
static void add_page_to_queue(struct page *page, struct page **p)
{
#ifdef PEDANTIC
if (page->pprev_hash)
PAGE_BUG(page);
#endif
page->next_hash = *p;
if (*p)
(*p)->pprev_hash = &page->next_hash;
*p = page;
page->pprev_hash = p;
}
static void remove_page_from_queue(struct page *page)
{
if (page->pprev_hash) {
if (page->next_hash)
page->next_hash->pprev_hash = page->pprev_hash;
*page->pprev_hash = page->next_hash;
page->pprev_hash = NULL;
}
}
static unsigned long __get_small_page(int priority, struct order *order)
{
unsigned long flags;
struct page *page;
int offset;
if (!order->queue)
do {
spin_lock_irqsave(&small_page_lock, flags);
if (list_empty(&order->queue))
goto need_new_page;
spin_lock_irqsave(&small_page_lock, flags);
page = order->queue;
page = list_entry(order->queue.next, struct page, list);
again:
#ifdef PEDANTIC
if (USED_MAP(page) & ~order->all_used)
......@@ -117,28 +96,28 @@ static unsigned long __get_small_page(int priority, struct order *order)
offset = ffz(USED_MAP(page));
SET_USED(page, offset);
if (USED_MAP(page) == order->all_used)
remove_page_from_queue(page);
list_del_init(&page->list);
spin_unlock_irqrestore(&small_page_lock, flags);
return (unsigned long) page_address(page) + (offset << order->shift);
need_new_page:
spin_unlock_irqrestore(&small_page_lock, flags);
page = alloc_page(priority);
spin_lock_irqsave(&small_page_lock, flags);
if (!order->queue) {
if (list_empty(&order->queue)) {
if (!page)
goto no_page;
SetPageReserved(page);
USED_MAP(page) = 0;
cli();
add_page_to_queue(page, &order->queue);
} else {
__free_page(page);
cli();
page = order->queue;
}
list_add(&page->list, &order->queue);
goto again;
}
spin_unlock_irqrestore(&small_page_lock, flags);
__free_page(page);
} while (1);
no_page:
spin_unlock_irqrestore(&small_page_lock, flags);
......@@ -173,7 +152,7 @@ static void __free_small_page(unsigned long spage, struct order *order)
spin_lock_irqsave(&small_page_lock, flags);
if (USED_MAP(page) == order->all_used)
add_page_to_queue(page, &order->queue);
list_add(&page->list, &order->queue);
if (!TEST_AND_CLEAR_USED(page, spage))
goto already_free;
......@@ -189,7 +168,7 @@ static void __free_small_page(unsigned long spage, struct order *order)
/*
* unlink the page from the small page queue and free it
*/
remove_page_from_queue(page);
list_del_init(&page->list);
spin_unlock_irqrestore(&small_page_lock, flags);
ClearPageReserved(page);
__free_page(page);
......
arch/arm/mach-iop310/iq80310-pci.c
View file @ fcbcfef5
......@@ -27,8 +27,9 @@
*/
#define PCI_IRQ_TABLE_LOOKUP(minid,maxid) \
({ int _ctl_ = -1; \
if (idsel >= minid && idsel <= maxid && pin >= 1 && pin <= 4) \
_ctl_ = pci_irq_table[idsel - minid][pin-1]; \
unsigned int _idsel = idsel - minid; \
if (_idsel <= maxid) \
_ctl_ = pci_irq_table[_idsel][pin-1]; \
_ctl_; })
#define INTA IRQ_IQ80310_INTA
......@@ -64,6 +65,8 @@ iq80310_pri_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
{
irq_table *pci_irq_table;
BUG_ON(pin < 1 || pin > 4);
if (!system_rev) {
pci_irq_table = pci_pri_d_irq_table;
} else {
......@@ -99,6 +102,8 @@ iq80310_sec_map_irq(struct pci_dev *dev, u8 idsel, u8 pin)
{
irq_table *pci_irq_table;
BUG_ON(pin < 1 || pin > 4);
if (!system_rev) {
pci_irq_table = pci_sec_d_irq_table;
} else {
......
arch/arm/mach-sa1100/assabet.c
View file @ fcbcfef5
......@@ -88,9 +88,21 @@ static int __init assabet_init(void)
return -EINVAL;
/*
* Set the IRQ edges
* Ensure that these pins are set as outputs and are driving
* logic 0. This ensures that we won't inadvertently toggle
* the WS latch in the CPLD, and we don't float causing
* excessive power drain. --rmk
*/
set_irq_type(IRQ_GPIO23, IRQT_RISING); /* UCB1300 */
GPDR |= GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM;
GPCR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM;
/*
* Set up registers for sleep mode.
*/
PWER = PWER_GPIO0;
PGSR = 0;
PCFR = 0;
PSDR = 0;
sa1100fb_lcd_power = assabet_lcd_power;
sa1100fb_backlight_power = assabet_backlight_power;
......@@ -254,13 +266,19 @@ static struct map_desc assabet_io_desc[] __initdata = {
static void __init assabet_map_io(void)
{
extern void neponset_map_io(void);
sa1100_map_io();
iotable_init(assabet_io_desc, ARRAY_SIZE(assabet_io_desc));
/*
* Set SUS bit in SDCR0 so serial port 1 functions.
* Its called GPCLKR0 in my SA1110 manual.
*/
Ser1SDCR0 |= SDCR0_SUS;
if (machine_has_neponset()) {
#ifdef CONFIG_ASSABET_NEPONSET
extern void neponset_map_io(void);
/*
* We map Neponset registers even if it isn't present since
* many drivers will try to probe their stuff (and fail).
......@@ -279,33 +297,11 @@ static void __init assabet_map_io(void)
*/
sa1100_register_uart(0, 3);
sa1100_register_uart(2, 1);
/*
* Set SUS bit in SDCR0 so serial port 1 functions.
* Its called GPCLKR0 in my SA1110 manual.
*/
Ser1SDCR0 |= SDCR0_SUS;
} else {
sa1100_register_uart_fns(&assabet_port_fns);
sa1100_register_uart(0, 1); /* com port */
sa1100_register_uart(2, 3); /* radio module */
}
/*
* Ensure that these pins are set as outputs and are driving
* logic 0. This ensures that we won't inadvertently toggle
* the WS latch in the CPLD, and we don't float causing
* excessive power drain. --rmk
*/
GPDR |= GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM;
GPCR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM;
/*
* Set up registers for sleep mode.
*/
PWER = PWER_GPIO0;
PGSR = 0;
PCFR = 0;
PSDR = 0;
}
......
arch/arm/mach-sa1100/irq.c
View file @ fcbcfef5
......@@ -58,7 +58,7 @@ static int sa1100_gpio_type(unsigned int irq, unsigned int type)
if (type == IRQT_PROBE) {
if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
return 0;
type == __IRQT_RISEDGE | __IRQT_FALEDGE;
type = __IRQT_RISEDGE | __IRQT_FALEDGE;
}
if (type & __IRQT_RISEDGE) {
......
arch/arm/mach-sa1100/pm.c
View file @ fcbcfef5
......@@ -73,7 +73,7 @@ int pm_do_suspend(void)
{
unsigned long sleep_save[SLEEP_SAVE_SIZE];
cli();
local_irq_disable();
leds_event(led_stop);
......@@ -157,7 +157,7 @@ int pm_do_suspend(void)
leds_event(led_start);
sti();
local_irq_enable();
/*
* Restore the CPU frequency settings.
......
arch/arm/mach-sa1100/shannon.c
View file @ fcbcfef5
......@@ -13,6 +13,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <asm/arch/shannon.h>
#include "generic.h"
......@@ -23,13 +24,16 @@ static void __init shannon_map_io(void)
sa1100_register_uart(0, 3);
sa1100_register_uart(1, 1);
Ser1SDCR0 |= SDCR0_SUS;
GAFR |= (GPIO_UART_TXD | GPIO_UART_RXD);
GPDR |= GPIO_UART_TXD;
GPDR |= GPIO_UART_TXD | SHANNON_GPIO_CODEC_RESET;
GPDR &= ~GPIO_UART_RXD;
PPAR |= PPAR_UPR;
set_GPIO_IRQ_edge(SHANNON_GPIO_IRQ_CODEC);
/* reset the codec */
GPCR = SHANNON_GPIO_CODEC_RESET;
GPSR = SHANNON_GPIO_CODEC_RESET;
}
MACHINE_START(SHANNON, "Shannon (AKA: Tuxscreen)")
......
arch/arm/mach-sa1100/sleep.S
View file @ fcbcfef5
......@@ -44,7 +44,8 @@ ENTRY(sa1100_cpu_suspend)
mrc p15, 0, r7, c1, c0, 0 @ control reg
@ store them plus current virtual stack ptr on stack
stmfd sp!, {r4 - r7, sp}
mov r8, sp
stmfd sp!, {r4 - r8}
@ preserve phys address of stack
mov r0, sp
......
arch/arm/mach-sa1100/xp860.c
View file @ fcbcfef5
......@@ -22,7 +22,7 @@
static void xp860_power_off(void)
{
cli();
local_irq_disable();
GPDR |= GPIO_GPIO20;
GPSR = GPIO_GPIO20;
mdelay(1000);
......
arch/arm/mm/fault-common.c
View file @ fcbcfef5
......@@ -34,12 +34,10 @@
#define READ_FAULT(m) (!((m) & FAULT_CODE_WRITE))
#else
/*
* On 32-bit processors, we define "mode" to be zero when reading,
* non-zero when writing. This now ties up nicely with the polarity
* of the 26-bit machines, and also means that we avoid the horrible
* gcc code for "int val = !other_val;".
* "code" is actually the FSR register. Bit 11 set means the
* isntruction was performing a write.
*/
#define DO_COW(code) ((code) & (1 << 8))
#define DO_COW(code) ((code) & (1 << 11))
#define READ_FAULT(code) (!DO_COW(code))
#endif
......@@ -56,7 +54,7 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
printk(KERN_ALERT "pgd = %p\n", mm->pgd);
pgd = pgd_offset(mm, addr);
printk(KERN_ALERT "*pgd = %08lx", pgd_val(*pgd));
printk(KERN_ALERT "*pgd=%08lx", pgd_val(*pgd));
do {
pmd_t *pmd;
......@@ -71,7 +69,9 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
}
pmd = pmd_offset(pgd, addr);
printk(", *pmd = %08lx", pmd_val(*pmd));
#if PTRS_PER_PMD != 1
printk(", *pmd=%08lx", pmd_val(*pmd));
#endif
if (pmd_none(*pmd))
break;
......@@ -84,9 +84,9 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
#ifndef CONFIG_HIGHMEM
/* We must not map this if we have highmem enabled */
pte = pte_offset_map(pmd, addr);
printk(", *pte = %08lx", pte_val(*pte));
printk(", *pte=%08lx", pte_val(*pte));
#ifdef CONFIG_CPU_32
printk(", *ppte = %08lx", pte_val(pte[-PTRS_PER_PTE]));
printk(", *ppte=%08lx", pte_val(pte[-PTRS_PER_PTE]));
#endif
pte_unmap(pte);
#endif
......
arch/arm/vmlinux-armo.lds.in
View file @ fcbcfef5
......@@ -8,10 +8,9 @@ jiffies = jiffies_64;
SECTIONS
{
. = TEXTADDR;
.init : {
.init : { /* Init code and data */
_stext = .;
__init_begin = .; /* Init code and data */
__init_begin = .;
*(.text.init)
__proc_info_begin = .;
*(.proc.info)
......@@ -50,7 +49,7 @@ SECTIONS
*(.exitcall.exit)
}
.text : {
.text : { /* Real text segment */
_text = .; /* Text and read-only data */
*(.text)
*(.fixup)
......@@ -59,19 +58,24 @@ SECTIONS
*(.rodata.*)
*(.glue_7)
*(.glue_7t)
*(.kstrtab)
. = ALIGN(16); /* Exception table */
*(.got) /* Global offset table */
_etext = .; /* End of text section */
}
.kstrtab : { *(.kstrtab) }
. = ALIGN(16);
__ex_table : { /* Exception table */
__start___ex_table = .;
*(__ex_table)
__stop___ex_table = .;
}
__start___ksymtab = .; /* Kernel symbol table */
__ksymtab : { /* Kernel symbol table */
__start___ksymtab = .;
*(__ksymtab)
__stop___ksymtab = .;
*(.got) /* Global offset table */
_etext = .; /* End of text section */
}
.data : {
......@@ -90,14 +94,12 @@ SECTIONS
_edata = .;
}
.bss : {
__bss_start = .; /* BSS */
*(.bss)
*(COMMON)
_end = . ;
}
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
......
include/asm-arm/arch-sa1100/assabet.h
View file @ fcbcfef5
......@@ -25,6 +25,13 @@
#define ASSABET_SCR_INIT -1
extern unsigned long SCR_value;
#ifdef CONFIG_ASSABET_NEPONSET
#define machine_has_neponset() ((SCR_value & ASSABET_SCR_SA1111) == 0)
#else
#define machine_has_neponset() (0)
#endif
/* Board Control Register */
......@@ -57,8 +64,6 @@
#define ASSABET_BCR_RAD_ON (1<<22) /* Radio Power On */
#define ASSABET_BCR_SPK_OFF (1<<23) /* 1 = Speaker amplifier power off */
extern unsigned long SCR_value;
#ifdef CONFIG_SA1100_ASSABET
extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set);
#else
......@@ -98,70 +103,4 @@ extern void ASSABET_BCR_frob(unsigned int mask, unsigned int set);
#define ASSABET_IRQ_GPIO_CF_BVD2 IRQ_GPIO24
#define ASSABET_IRQ_GPIO_CF_BVD1 IRQ_GPIO25
/*
* Neponset definitions:
*/
#define NEPONSET_CPLD_BASE (0x10000000)
#define Nep_p2v( x ) ((x) - NEPONSET_CPLD_BASE + 0xf3000000)
#define Nep_v2p( x ) ((x) - 0xf3000000 + NEPONSET_CPLD_BASE)
#define _IRR 0x10000024 /* Interrupt Reason Register */
#define _AUD_CTL 0x100000c0 /* Audio controls (RW) */
#define _MDM_CTL_0 0x100000b0 /* Modem control 0 (RW) */
#define _MDM_CTL_1 0x100000b4 /* Modem control 1 (RW) */
#define _NCR_0 0x100000a0 /* Control Register (RW) */
#define _KP_X_OUT 0x10000090 /* Keypad row write (RW) */
#define _KP_Y_IN 0x10000080 /* Keypad column read (RO) */
#define _SWPK 0x10000020 /* Switch pack (RO) */
#define _WHOAMI 0x10000000 /* System ID Register (RO) */
#define _LEDS 0x10000010 /* LEDs [31:0] (WO) */
#define IRR (*((volatile u_char *) Nep_p2v(_IRR)))
#define AUD_CTL (*((volatile u_char *) Nep_p2v(_AUD_CTL)))
#define MDM_CTL_0 (*((volatile u_char *) Nep_p2v(_MDM_CTL_0)))
#define MDM_CTL_1 (*((volatile u_char *) Nep_p2v(_MDM_CTL_1)))
#define NCR_0 (*((volatile u_char *) Nep_p2v(_NCR_0)))
#define KP_X_OUT (*((volatile u_char *) Nep_p2v(_KP_X_OUT)))
#define KP_Y_IN (*((volatile u_char *) Nep_p2v(_KP_Y_IN)))
#define SWPK (*((volatile u_char *) Nep_p2v(_SWPK)))
#define WHOAMI (*((volatile u_char *) Nep_p2v(_WHOAMI)))
#define LEDS (*((volatile Word *) Nep_p2v(_LEDS)))
#define IRR_ETHERNET (1<<0)
#define IRR_USAR (1<<1)
#define IRR_SA1111 (1<<2)
#define AUD_SEL_1341 (1<<0)
#define AUD_MUTE_1341 (1<<1)
#define MDM_CTL0_RTS1 (1 << 0)
#define MDM_CTL0_DTR1 (1 << 1)
#define MDM_CTL0_RTS2 (1 << 2)
#define MDM_CTL0_DTR2 (1 << 3)
#define MDM_CTL1_CTS1 (1 << 0)
#define MDM_CTL1_DSR1 (1 << 1)
#define MDM_CTL1_DCD1 (1 << 2)
#define MDM_CTL1_CTS2 (1 << 3)
#define MDM_CTL1_DSR2 (1 << 4)
#define MDM_CTL1_DCD2 (1 << 5)
#define NCR_GP01_OFF (1<<0)
#define NCR_TP_PWR_EN (1<<1)
#define NCR_MS_PWR_EN (1<<2)
#define NCR_ENET_OSC_EN (1<<3)
#define NCR_SPI_KB_WK_UP (1<<4)
#define NCR_A0VPP (1<<5)
#define NCR_A1VPP (1<<6)
#ifdef CONFIG_ASSABET_NEPONSET
#define machine_has_neponset() ((SCR_value & ASSABET_SCR_SA1111) == 0)
#else
#define machine_has_neponset() (0)
#endif
#endif
include/asm-arm/arch-sa1100/neponset.h 0 → 100644
View file @ fcbcfef5
/*
* linux/include/asm-arm/arch-sa1100/assabet.h
*
* Created 2000/06/05 by Nicolas Pitre <nico@cam.org>
*
* This file contains the hardware specific definitions for Assabet
* Only include this file from SA1100-specific files.
*
* 2000/05/23 John Dorsey <john+@cs.cmu.edu>
* Definitions for Neponset added.
*/
#ifndef __ASM_ARCH_NEPONSET_H
#define __ASM_ARCH_NEPONSET_H
/*
* Neponset definitions:
*/
#define NEPONSET_CPLD_BASE (0x10000000)
#define Nep_p2v( x ) ((x) - NEPONSET_CPLD_BASE + 0xf3000000)
#define Nep_v2p( x ) ((x) - 0xf3000000 + NEPONSET_CPLD_BASE)
#define _IRR 0x10000024 /* Interrupt Reason Register */
#define _AUD_CTL 0x100000c0 /* Audio controls (RW) */
#define _MDM_CTL_0 0x100000b0 /* Modem control 0 (RW) */
#define _MDM_CTL_1 0x100000b4 /* Modem control 1 (RW) */
#define _NCR_0 0x100000a0 /* Control Register (RW) */
#define _KP_X_OUT 0x10000090 /* Keypad row write (RW) */
#define _KP_Y_IN 0x10000080 /* Keypad column read (RO) */
#define _SWPK 0x10000020 /* Switch pack (RO) */
#define _WHOAMI 0x10000000 /* System ID Register (RO) */
#define _LEDS 0x10000010 /* LEDs [31:0] (WO) */
#define IRR (*((volatile u_char *) Nep_p2v(_IRR)))
#define AUD_CTL (*((volatile u_char *) Nep_p2v(_AUD_CTL)))
#define MDM_CTL_0 (*((volatile u_char *) Nep_p2v(_MDM_CTL_0)))
#define MDM_CTL_1 (*((volatile u_char *) Nep_p2v(_MDM_CTL_1)))
#define NCR_0 (*((volatile u_char *) Nep_p2v(_NCR_0)))
#define KP_X_OUT (*((volatile u_char *) Nep_p2v(_KP_X_OUT)))
#define KP_Y_IN (*((volatile u_char *) Nep_p2v(_KP_Y_IN)))
#define SWPK (*((volatile u_char *) Nep_p2v(_SWPK)))
#define WHOAMI (*((volatile u_char *) Nep_p2v(_WHOAMI)))
#define LEDS (*((volatile Word *) Nep_p2v(_LEDS)))
#define IRR_ETHERNET (1<<0)
#define IRR_USAR (1<<1)
#define IRR_SA1111 (1<<2)
#define AUD_SEL_1341 (1<<0)
#define AUD_MUTE_1341 (1<<1)
#define MDM_CTL0_RTS1 (1 << 0)
#define MDM_CTL0_DTR1 (1 << 1)
#define MDM_CTL0_RTS2 (1 << 2)
#define MDM_CTL0_DTR2 (1 << 3)
#define MDM_CTL1_CTS1 (1 << 0)
#define MDM_CTL1_DSR1 (1 << 1)
#define MDM_CTL1_DCD1 (1 << 2)
#define MDM_CTL1_CTS2 (1 << 3)
#define MDM_CTL1_DSR2 (1 << 4)
#define MDM_CTL1_DCD2 (1 << 5)
#define NCR_GP01_OFF (1<<0)
#define NCR_TP_PWR_EN (1<<1)
#define NCR_MS_PWR_EN (1<<2)
#define NCR_ENET_OSC_EN (1<<3)
#define NCR_SPI_KB_WK_UP (1<<4)
#define NCR_A0VPP (1<<5)
#define NCR_A1VPP (1<<6)
#endif
include/asm-arm/arch-sa1100/pfs168.h
View file @ fcbcfef5
......@@ -47,8 +47,6 @@
#define SA1111_BASE (0x40000000)
#ifndef __ASSEMBLY__
#define machine_has_neponset() (0)
#define PFS168_COM5_VBASE (*((volatile unsigned char *)(0xf0000000UL)))
#define PFS168_COM6_VBASE (*((volatile unsigned char *)(0xf0001000UL)))
#define PFS168_SYSC1RTS (*((volatile unsigned char *)(0xf0002000UL)))
......
include/asm-arm/arch-sa1100/serial.h
View file @ fcbcfef5
......@@ -7,6 +7,26 @@
* This is included by serial.c -- serial_sa1100.c makes no use of it.
*/
/* Standard COM flags */
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
/*
* Rather empty table...
* Hardwired serial ports should be defined here.
* PCMCIA will fill it dynamically.
*/
#ifdef CONFIG_SA1100_TRIZEPS
#define RS_TABLE_SIZE 2
#define STD_SERIAL_PORT_DEFNS \
/* UART CLK PORT IRQ FLAGS */ \
{ 0, 1500000, TRIZEPS_UART5, IRQ_GPIO16, STD_COM_FLAGS }, \
{ 0, 1500000, TRIZEPS_UART6, IRQ_GPIO17, STD_COM_FLAGS }
#else
#define RS_TABLE_SIZE 4
/*
* This assumes you have a 1.8432 MHz clock for your UART.
......@@ -17,17 +37,6 @@
*/
#define BASE_BAUD ( 1843200 / 16 )
/* Standard COM flags */
#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
#define RS_TABLE_SIZE 4
/*
* Rather empty table...
* Hardwired serial ports should be defined here.
* PCMCIA will fill it dynamically.
*/
#define STD_SERIAL_PORT_DEFNS \
/* UART CLK PORT IRQ FLAGS */ \
{ 0, BASE_BAUD, 0, 0, STD_COM_FLAGS }, \
......@@ -35,5 +44,6 @@
{ 0, BASE_BAUD, 0, 0, STD_COM_FLAGS }, \
{ 0, BASE_BAUD, 0, 0, STD_COM_FLAGS }
#define EXTRA_SERIAL_PORT_DEFNS
#endif
#define EXTRA_SERIAL_PORT_DEFNS
include/asm-arm/glue.h
View file @ fcbcfef5
......@@ -89,7 +89,8 @@
* v4_early - ARMv4 without Thumb early abort handler
* v4t_late - ARMv4 with Thumb late abort handler
* v4t_early - ARMv4 with Thumb early abort handler
* v5ej_early - ARMv5 with Thumb and Java early abort handler
* v5tej_early - ARMv5 with Thumb and Java early abort handler
* xscale - ARMv5 with Thumb with Xscale extensions
*/
#undef CPU_ABORT_HANDLER
#undef MULTI_ABORT
......@@ -127,7 +128,7 @@
#endif
#if defined(CONFIG_CPU_ARM920T) || defined(CONFIG_CPU_ARM922T) || \
defined(CONFIG_CPU_ARM1020) || defined(CONFIG_CPU_XSCALE)
defined(CONFIG_CPU_ARM1020)
# ifdef CPU_ABORT_HANDLER
# define MULTI_ABORT 1
# else
......@@ -139,7 +140,15 @@
# ifdef CPU_ABORT_HANDLER
# define MULTI_ABORT 1
# else
# define CPU_ABORT_HANDLER v5ej_early_abort
# define CPU_ABORT_HANDLER v5tej_early_abort
# endif
#endif
#if defined(CONFIG_CPU_XSCALE)
# ifdef CPU_ABORT_HANDLER
# define MULTI_ABORT 1
# else
# define CPU_ABORT_HANDLER xscale_abort
# endif
#endif
......@@ -161,7 +170,7 @@
* v4wt - ARMv4 with writethrough cache, without minicache
* v4wb - ARMv4 with writeback cache, without minicache
* v4_mc - ARMv4 with minicache
* v5te_mc - ARMv5TE with minicache
* xscale - Xscale
*/
#undef _USER
#undef MULTI_USER
......@@ -204,7 +213,7 @@
# ifdef _USER
# define MULTI_USER 1
# else
# define _USER v5te_mc
# define _USER xscale_mc
# endif
#endif
......
include/asm-arm/mach/serial_sa1100.h
View file @ fcbcfef5
......@@ -19,11 +19,8 @@ struct uart_info;
struct sa1100_port_fns {
void (*set_mctrl)(struct uart_port *, u_int);
u_int (*get_mctrl)(struct uart_port *);
void (*enable_ms)(struct uart_port *);
void (*pm)(struct uart_port *, u_int, u_int);
int (*set_wake)(struct uart_port *, u_int);
int (*open)(struct uart_port *, struct uart_info *);
void (*close)(struct uart_port *, struct uart_info *);
};
#ifdef CONFIG_SERIAL_SA1100
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7