staging: r8188eu: Add files for new driver - part 23

This commit adds files include/ieee80211.h, include/ieee80211_ext.h,
include/if_ether.h, include/ioctl_cfg80211.h, include/ip.h,
include/mlme_osdep.h, include/mp_custom_oid.h, and include/nic_spec.h.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/rtl8188eu/include/ieee80211.h

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __IEEE80211_H
+#define __IEEE80211_H
+
+#include <osdep_service.h>
+#include <drv_types.h>
+#include "wifi.h"
+#include <linux/wireless.h>
+
+#define MGMT_QUEUE_NUM 5
+
+#define ETH_ALEN	6
+#define ETH_TYPE_LEN		2
+#define PAYLOAD_TYPE_LEN	1
+
+#ifdef CONFIG_88EU_AP_MODE
+
+#define RTL_IOCTL_HOSTAPD (SIOCIWFIRSTPRIV + 28)
+
+/* RTL871X_IOCTL_HOSTAPD ioctl() cmd: */
+enum {
+	RTL871X_HOSTAPD_FLUSH = 1,
+	RTL871X_HOSTAPD_ADD_STA = 2,
+	RTL871X_HOSTAPD_REMOVE_STA = 3,
+	RTL871X_HOSTAPD_GET_INFO_STA = 4,
+	/* REMOVED: PRISM2_HOSTAPD_RESET_TXEXC_STA = 5, */
+	RTL871X_HOSTAPD_GET_WPAIE_STA = 5,
+	RTL871X_SET_ENCRYPTION = 6,
+	RTL871X_GET_ENCRYPTION = 7,
+	RTL871X_HOSTAPD_SET_FLAGS_STA = 8,
+	RTL871X_HOSTAPD_GET_RID = 9,
+	RTL871X_HOSTAPD_SET_RID = 10,
+	RTL871X_HOSTAPD_SET_ASSOC_AP_ADDR = 11,
+	RTL871X_HOSTAPD_SET_GENERIC_ELEMENT = 12,
+	RTL871X_HOSTAPD_MLME = 13,
+	RTL871X_HOSTAPD_SCAN_REQ = 14,
+	RTL871X_HOSTAPD_STA_CLEAR_STATS = 15,
+	RTL871X_HOSTAPD_SET_BEACON = 16,
+	RTL871X_HOSTAPD_SET_WPS_BEACON = 17,
+	RTL871X_HOSTAPD_SET_WPS_PROBE_RESP = 18,
+	RTL871X_HOSTAPD_SET_WPS_ASSOC_RESP = 19,
+	RTL871X_HOSTAPD_SET_HIDDEN_SSID = 20,
+	RTL871X_HOSTAPD_SET_MACADDR_ACL = 21,
+	RTL871X_HOSTAPD_ACL_ADD_STA = 22,
+	RTL871X_HOSTAPD_ACL_REMOVE_STA = 23,
+};
+
+/* STA flags */
+#define WLAN_STA_AUTH BIT(0)
+#define WLAN_STA_ASSOC BIT(1)
+#define WLAN_STA_PS BIT(2)
+#define WLAN_STA_TIM BIT(3)
+#define WLAN_STA_PERM BIT(4)
+#define WLAN_STA_AUTHORIZED BIT(5)
+#define WLAN_STA_PENDING_POLL BIT(6) /* pending activity poll not ACKed */
+#define WLAN_STA_SHORT_PREAMBLE BIT(7)
+#define WLAN_STA_PREAUTH BIT(8)
+#define WLAN_STA_WME BIT(9)
+#define WLAN_STA_MFP BIT(10)
+#define WLAN_STA_HT BIT(11)
+#define WLAN_STA_WPS BIT(12)
+#define WLAN_STA_MAYBE_WPS BIT(13)
+#define WLAN_STA_NONERP BIT(31)
+
+#endif
+
+#define IEEE_CMD_SET_WPA_PARAM			1
+#define IEEE_CMD_SET_WPA_IE				2
+#define IEEE_CMD_SET_ENCRYPTION			3
+#define IEEE_CMD_MLME						4
+
+#define IEEE_PARAM_WPA_ENABLED				1
+#define IEEE_PARAM_TKIP_COUNTERMEASURES		2
+#define IEEE_PARAM_DROP_UNENCRYPTED			3
+#define IEEE_PARAM_PRIVACY_INVOKED			4
+#define IEEE_PARAM_AUTH_ALGS					5
+#define IEEE_PARAM_IEEE_802_1X				6
+#define IEEE_PARAM_WPAX_SELECT				7
+
+#define AUTH_ALG_OPEN_SYSTEM			0x1
+#define AUTH_ALG_SHARED_KEY			0x2
+#define AUTH_ALG_LEAP				0x00000004
+
+#define IEEE_MLME_STA_DEAUTH				1
+#define IEEE_MLME_STA_DISASSOC			2
+
+#define IEEE_CRYPT_ERR_UNKNOWN_ALG			2
+#define IEEE_CRYPT_ERR_UNKNOWN_ADDR			3
+#define IEEE_CRYPT_ERR_CRYPT_INIT_FAILED		4
+#define IEEE_CRYPT_ERR_KEY_SET_FAILED			5
+#define IEEE_CRYPT_ERR_TX_KEY_SET_FAILED		6
+#define IEEE_CRYPT_ERR_CARD_CONF_FAILED		7
+
+
+#define	IEEE_CRYPT_ALG_NAME_LEN			16
+
+#define WPA_CIPHER_NONE		BIT(0)
+#define WPA_CIPHER_WEP40	BIT(1)
+#define WPA_CIPHER_WEP104 BIT(2)
+#define WPA_CIPHER_TKIP		BIT(3)
+#define WPA_CIPHER_CCMP		BIT(4)
+
+
+
+#define WPA_SELECTOR_LEN 4
+extern u8 RTW_WPA_OUI_TYPE[];
+extern u16 RTW_WPA_VERSION;
+extern u8 WPA_AUTH_KEY_MGMT_NONE[];
+extern u8 WPA_AUTH_KEY_MGMT_UNSPEC_802_1X[];
+extern u8 WPA_AUTH_KEY_MGMT_PSK_OVER_802_1X[];
+extern u8 WPA_CIPHER_SUITE_NONE[];
+extern u8 WPA_CIPHER_SUITE_WEP40[];
+extern u8 WPA_CIPHER_SUITE_TKIP[];
+extern u8 WPA_CIPHER_SUITE_WRAP[];
+extern u8 WPA_CIPHER_SUITE_CCMP[];
+extern u8 WPA_CIPHER_SUITE_WEP104[];
+
+
+#define RSN_HEADER_LEN 4
+#define RSN_SELECTOR_LEN 4
+
+extern u16 RSN_VERSION_BSD;
+extern u8 RSN_AUTH_KEY_MGMT_UNSPEC_802_1X[];
+extern u8 RSN_AUTH_KEY_MGMT_PSK_OVER_802_1X[];
+extern u8 RSN_CIPHER_SUITE_NONE[];
+extern u8 RSN_CIPHER_SUITE_WEP40[];
+extern u8 RSN_CIPHER_SUITE_TKIP[];
+extern u8 RSN_CIPHER_SUITE_WRAP[];
+extern u8 RSN_CIPHER_SUITE_CCMP[];
+extern u8 RSN_CIPHER_SUITE_WEP104[];
+
+enum ratr_table_mode {
+	RATR_INX_WIRELESS_NGB = 0,	/*  BGN 40 Mhz 2SS 1SS */
+	RATR_INX_WIRELESS_NG = 1,	/*  GN or N */
+	RATR_INX_WIRELESS_NB = 2,	/*  BGN 20 Mhz 2SS 1SS  or BN */
+	RATR_INX_WIRELESS_N = 3,
+	RATR_INX_WIRELESS_GB = 4,
+	RATR_INX_WIRELESS_G = 5,
+	RATR_INX_WIRELESS_B = 6,
+	RATR_INX_WIRELESS_MC = 7,
+	RATR_INX_WIRELESS_AC_N = 8,
+};
+
+enum NETWORK_TYPE {
+	WIRELESS_INVALID = 0,
+	/* Sub-Element */
+	WIRELESS_11B = BIT(0), /* tx:cck only, rx:cck only, hw: cck */
+	WIRELESS_11G = BIT(1), /* tx:ofdm only, rx:ofdm & cck, hw:cck & ofdm*/
+	WIRELESS_11A = BIT(2), /* tx:ofdm only, rx: ofdm only, hw:ofdm only */
+	WIRELESS_11_24N = BIT(3), /* tx:MCS only, rx:MCS & cck, hw:MCS & cck */
+	WIRELESS_11_5N = BIT(4), /* tx:MCS only, rx:MCS & ofdm, hw:ofdm only */
+	WIRELESS_AC		= BIT(6),
+
+	/* Combination */
+	/*  tx: cck & ofdm, rx: cck & ofdm & MCS, hw: cck & ofdm */
+	WIRELESS_11BG = (WIRELESS_11B | WIRELESS_11G),
+	/*  tx: ofdm & MCS, rx: ofdm & cck & MCS, hw: cck & ofdm */
+	WIRELESS_11G_24N = (WIRELESS_11G | WIRELESS_11_24N),
+	/*  tx: ofdm & MCS, rx: ofdm & MCS, hw: ofdm only */
+	WIRELESS_11A_5N = (WIRELESS_11A | WIRELESS_11_5N),
+	/*  tx: ofdm & cck & MCS, rx: ofdm & cck & MCS, hw: ofdm & cck */
+	WIRELESS_11BG_24N = (WIRELESS_11B | WIRELESS_11G | WIRELESS_11_24N),
+	/*  tx: ofdm & MCS, rx: ofdm & MCS, hw: ofdm only */
+	WIRELESS_11AGN = (WIRELESS_11A | WIRELESS_11G | WIRELESS_11_24N |
+			  WIRELESS_11_5N),
+	WIRELESS_11ABGN = (WIRELESS_11A | WIRELESS_11B | WIRELESS_11G |
+			   WIRELESS_11_24N | WIRELESS_11_5N),
+};
+
+#define SUPPORTED_24G_NETTYPE_MSK				\
+	 (WIRELESS_11B | WIRELESS_11G | WIRELESS_11_24N)
+#define SUPPORTED_5G_NETTYPE_MSK				\
+	 (WIRELESS_11A | WIRELESS_11_5N)
+
+#define IsSupported24G(NetType)					\
+	((NetType) & SUPPORTED_24G_NETTYPE_MSK ? true : false)
+#define IsSupported5G(NetType)					\
+	((NetType) & SUPPORTED_5G_NETTYPE_MSK ? true : false)
+
+#define IsEnableHWCCK(NetType)					\
+	IsSupported24G(NetType)
+#define IsEnableHWOFDM(NetType)					\
+	((NetType) & (WIRELESS_11G | WIRELESS_11_24N |		\
+	 SUPPORTED_5G_NETTYPE_MSK) ? true : false)
+
+#define IsSupportedRxCCK(NetType) IsEnableHWCCK(NetType)
+#define IsSupportedRxOFDM(NetType) IsEnableHWOFDM(NetType)
+#define IsSupportedRxMCS(NetType) IsEnableHWOFDM(NetType)
+
+#define IsSupportedTxCCK(NetType)				\
+	((NetType) & (WIRELESS_11B) ? true : false)
+#define IsSupportedTxOFDM(NetType)				\
+	((NetType) & (WIRELESS_11G|WIRELESS_11A) ? true : false)
+#define IsSupportedTxMCS(NetType)				\
+	((NetType) & (WIRELESS_11_24N|WIRELESS_11_5N) ? true : false)
+
+
+struct ieee_param {
+	u32 cmd;
+	u8 sta_addr[ETH_ALEN];
+	union {
+		struct {
+			u8 name;
+			u32 value;
+		} wpa_param;
+		struct {
+			u32 len;
+			u8 reserved[32];
+			u8 data[0];
+		} wpa_ie;
+		struct {
+			int command;
+			int reason_code;
+		} mlme;
+		struct {
+			u8 alg[IEEE_CRYPT_ALG_NAME_LEN];
+			u8 set_tx;
+			u32 err;
+			u8 idx;
+			u8 seq[8]; /* sequence counter (set: RX, get: TX) */
+			u16 key_len;
+			u8 key[0];
+		} crypt;
+#ifdef CONFIG_88EU_AP_MODE
+		struct {
+			u16 aid;
+			u16 capability;
+			int flags;
+			u8 tx_supp_rates[16];
+			struct rtw_ieee80211_ht_cap ht_cap;
+		} add_sta;
+		struct {
+			u8	reserved[2];/* for set max_num_sta */
+			u8	buf[0];
+		} bcn_ie;
+#endif
+
+	} u;
+};
+
+#ifdef CONFIG_88EU_AP_MODE
+struct ieee_param_ex {
+	u32 cmd;
+	u8 sta_addr[ETH_ALEN];
+	u8 data[0];
+};
+
+struct sta_data {
+	u16 aid;
+	u16 capability;
+	int flags;
+	u32 sta_set;
+	u8 tx_supp_rates[16];
+	u32 tx_supp_rates_len;
+	struct rtw_ieee80211_ht_cap ht_cap;
+	u64	rx_pkts;
+	u64	rx_bytes;
+	u64	rx_drops;
+	u64	tx_pkts;
+	u64	tx_bytes;
+	u64	tx_drops;
+};
+#endif
+
+#define IEEE80211_DATA_LEN		2304
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+   6.2.1.1.2.
+
+   The figure in section 7.1.2 suggests a body size of up to 2312
+   bytes is allowed, which is a bit confusing, I suspect this
+   represents the 2304 bytes of real data, plus a possible 8 bytes of
+   WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+
+
+#define IEEE80211_HLEN			30
+#define IEEE80211_FRAME_LEN		(IEEE80211_DATA_LEN + IEEE80211_HLEN)
+
+
+/* this is stolen from ipw2200 driver */
+#define IEEE_IBSS_MAC_HASH_SIZE 31
+
+struct ieee_ibss_seq {
+	u8 mac[ETH_ALEN];
+	u16 seq_num;
+	u16 frag_num;
+	unsigned long packet_time;
+	struct list_head list;
+};
+
+struct rtw_ieee80211_hdr {
+	u16 frame_ctl;
+	u16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	u16 seq_ctl;
+	u8 addr4[ETH_ALEN];
+} __packed;
+
+struct rtw_ieee80211_hdr_3addr {
+	u16 frame_ctl;
+	u16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	u16 seq_ctl;
+} __packed;
+
+struct rtw_ieee80211_hdr_qos {
+	u16 frame_ctl;
+	u16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	u16 seq_ctl;
+	u8 addr4[ETH_ALEN];
+	u16	qc;
+}  __packed;
+
+struct rtw_ieee80211_hdr_3addr_qos {
+	u16 frame_ctl;
+	u16 duration_id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+	u8 addr3[ETH_ALEN];
+	u16 seq_ctl;
+	u16     qc;
+}  __packed;
+
+struct eapol {
+	u8 snap[6];
+	u16 ethertype;
+	u8 version;
+	u8 type;
+	u16 length;
+} __packed;
+
+enum eap_type {
+	EAP_PACKET = 0,
+	EAPOL_START,
+	EAPOL_LOGOFF,
+	EAPOL_KEY,
+	EAPOL_ENCAP_ASF_ALERT
+};
+
+#define IEEE80211_3ADDR_LEN 24
+#define IEEE80211_4ADDR_LEN 30
+#define IEEE80211_FCS_LEN    4
+
+#define MIN_FRAG_THRESHOLD     256U
+#define	MAX_FRAG_THRESHOLD     2346U
+
+/* Frame control field constants */
+#define RTW_IEEE80211_FCTL_VERS		0x0003
+#define RTW_IEEE80211_FCTL_FTYPE	0x000c
+#define RTW_IEEE80211_FCTL_STYPE	0x00f0
+#define RTW_IEEE80211_FCTL_TODS		0x0100
+#define RTW_IEEE80211_FCTL_FROMDS	0x0200
+#define RTW_IEEE80211_FCTL_MOREFRAGS	0x0400
+#define RTW_IEEE80211_FCTL_RETRY	0x0800
+#define RTW_IEEE80211_FCTL_PM		0x1000
+#define RTW_IEEE80211_FCTL_MOREDATA	0x2000
+#define RTW_IEEE80211_FCTL_PROTECTED	0x4000
+#define RTW_IEEE80211_FCTL_ORDER	0x8000
+#define RTW_IEEE80211_FCTL_CTL_EXT	0x0f00
+
+#define RTW_IEEE80211_FTYPE_MGMT	0x0000
+#define RTW_IEEE80211_FTYPE_CTL		0x0004
+#define RTW_IEEE80211_FTYPE_DATA	0x0008
+#define RTW_IEEE80211_FTYPE_EXT		0x000c
+
+/* management */
+#define RTW_IEEE80211_STYPE_ASSOC_REQ	0x0000
+#define RTW_IEEE80211_STYPE_ASSOC_RESP	0x0010
+#define RTW_IEEE80211_STYPE_REASSOC_REQ	0x0020
+#define RTW_IEEE80211_STYPE_REASSOC_RESP	0x0030
+#define RTW_IEEE80211_STYPE_PROBE_REQ	0x0040
+#define RTW_IEEE80211_STYPE_PROBE_RESP	0x0050
+#define RTW_IEEE80211_STYPE_BEACON	0x0080
+#define RTW_IEEE80211_STYPE_ATIM	0x0090
+#define RTW_IEEE80211_STYPE_DISASSOC	0x00A0
+#define RTW_IEEE80211_STYPE_AUTH	0x00B0
+#define RTW_IEEE80211_STYPE_DEAUTH	0x00C0
+#define RTW_IEEE80211_STYPE_ACTION	0x00D0
+
+/* control */
+#define RTW_IEEE80211_STYPE_CTL_EXT	0x0060
+#define RTW_IEEE80211_STYPE_BACK_REQ	0x0080
+#define RTW_IEEE80211_STYPE_BACK	0x0090
+#define RTW_IEEE80211_STYPE_PSPOLL	0x00A0
+#define RTW_IEEE80211_STYPE_RTS		0x00B0
+#define RTW_IEEE80211_STYPE_CTS		0x00C0
+#define RTW_IEEE80211_STYPE_ACK		0x00D0
+#define RTW_IEEE80211_STYPE_CFEND	0x00E0
+#define RTW_IEEE80211_STYPE_CFENDACK	0x00F0
+
+/* data */
+#define RTW_IEEE80211_STYPE_DATA	0x0000
+#define RTW_IEEE80211_STYPE_DATA_CFACK	0x0010
+#define RTW_IEEE80211_STYPE_DATA_CFPOLL	0x0020
+#define RTW_IEEE80211_STYPE_DATA_CFACKPOLL	0x0030
+#define RTW_IEEE80211_STYPE_NULLFUNC	0x0040
+#define RTW_IEEE80211_STYPE_CFACK	0x0050
+#define RTW_IEEE80211_STYPE_CFPOLL	0x0060
+#define RTW_IEEE80211_STYPE_CFACKPOLL	0x0070
+#define RTW_IEEE80211_STYPE_QOS_DATA	0x0080
+#define RTW_IEEE80211_STYPE_QOS_DATA_CFACK	0x0090
+#define RTW_IEEE80211_STYPE_QOS_DATA_CFPOLL	0x00A0
+#define RTW_IEEE80211_STYPE_QOS_DATA_CFACKPOLL	0x00B0
+#define RTW_IEEE80211_STYPE_QOS_NULLFUNC	0x00C0
+#define RTW_IEEE80211_STYPE_QOS_CFACK		0x00D0
+#define RTW_IEEE80211_STYPE_QOS_CFPOLL		0x00E0
+#define RTW_IEEE80211_STYPE_QOS_CFACKPOLL	0x00F0
+
+/* sequence control field */
+#define RTW_IEEE80211_SCTL_FRAG	0x000F
+#define RTW_IEEE80211_SCTL_SEQ	0xFFF0
+
+
+#define RTW_ERP_INFO_NON_ERP_PRESENT BIT(0)
+#define RTW_ERP_INFO_USE_PROTECTION BIT(1)
+#define RTW_ERP_INFO_BARKER_PREAMBLE_MODE BIT(2)
+
+/* QoS, QOS */
+#define NORMAL_ACK			0
+#define NO_ACK				1
+#define NON_EXPLICIT_ACK		2
+#define BLOCK_ACK			3
+
+#ifndef ETH_P_PAE
+#define ETH_P_PAE 0x888E /* Port Access Entity (IEEE 802.1X) */
+#endif /* ETH_P_PAE */
+
+#define ETH_P_PREAUTH 0x88C7 /* IEEE 802.11i pre-authentication */
+
+#define ETH_P_ECONET	0x0018
+
+#ifndef ETH_P_80211_RAW
+#define ETH_P_80211_RAW (ETH_P_ECONET + 1)
+#endif
+
+/* IEEE 802.11 defines */
+
+#define P80211_OUI_LEN 3
+
+struct ieee80211_snap_hdr {
+	u8    dsap;   /* always 0xAA */
+	u8    ssap;   /* always 0xAA */
+	u8    ctrl;   /* always 0x03 */
+	u8    oui[P80211_OUI_LEN];    /* organizational universal id */
+} __packed;
+
+#define SNAP_SIZE sizeof(struct ieee80211_snap_hdr)
+
+#define WLAN_FC_GET_TYPE(fc) ((fc) & RTW_IEEE80211_FCTL_FTYPE)
+#define WLAN_FC_GET_STYPE(fc) ((fc) & RTW_IEEE80211_FCTL_STYPE)
+
+#define WLAN_QC_GET_TID(qc) ((qc) & 0x0f)
+
+#define WLAN_GET_SEQ_FRAG(seq) ((seq) & RTW_IEEE80211_SCTL_FRAG)
+#define WLAN_GET_SEQ_SEQ(seq)  ((seq) & RTW_IEEE80211_SCTL_SEQ)
+
+/* Authentication algorithms */
+#define WLAN_AUTH_OPEN 0
+#define WLAN_AUTH_SHARED_KEY 1
+
+#define WLAN_AUTH_CHALLENGE_LEN 128
+
+#define WLAN_CAPABILITY_BSS (1<<0)
+#define WLAN_CAPABILITY_IBSS (1<<1)
+#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
+#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
+#define WLAN_CAPABILITY_PRIVACY (1<<4)
+#define WLAN_CAPABILITY_SHORT_PREAMBLE (1<<5)
+#define WLAN_CAPABILITY_PBCC (1<<6)
+#define WLAN_CAPABILITY_CHANNEL_AGILITY (1<<7)
+#define WLAN_CAPABILITY_SHORT_SLOT (1<<10)
+
+/* Status codes */
+#define WLAN_STATUS_SUCCESS 0
+#define WLAN_STATUS_UNSPECIFIED_FAILURE 1
+#define WLAN_STATUS_CAPS_UNSUPPORTED 10
+#define WLAN_STATUS_REASSOC_NO_ASSOC 11
+#define WLAN_STATUS_ASSOC_DENIED_UNSPEC 12
+#define WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG 13
+#define WLAN_STATUS_UNKNOWN_AUTH_TRANSACTION 14
+#define WLAN_STATUS_CHALLENGE_FAIL 15
+#define WLAN_STATUS_AUTH_TIMEOUT 16
+#define WLAN_STATUS_AP_UNABLE_TO_HANDLE_NEW_STA 17
+#define WLAN_STATUS_ASSOC_DENIED_RATES 18
+/* 802.11b */
+#define WLAN_STATUS_ASSOC_DENIED_NOSHORT 19
+#define WLAN_STATUS_ASSOC_DENIED_NOPBCC 20
+#define WLAN_STATUS_ASSOC_DENIED_NOAGILITY 21
+
+/* Reason codes */
+#define WLAN_REASON_UNSPECIFIED 1
+#define WLAN_REASON_PREV_AUTH_NOT_VALID 2
+#define WLAN_REASON_DEAUTH_LEAVING 3
+#define WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY 4
+#define WLAN_REASON_DISASSOC_AP_BUSY 5
+#define WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA 6
+#define WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA 7
+#define WLAN_REASON_DISASSOC_STA_HAS_LEFT 8
+#define WLAN_REASON_STA_REQ_ASSOC_WITHOUT_AUTH 9
+#define WLAN_REASON_JOIN_WRONG_CHANNEL       65534
+#define WLAN_REASON_EXPIRATION_CHK 65535
+
+/* Information Element IDs */
+#define WLAN_EID_SSID 0
+#define WLAN_EID_SUPP_RATES 1
+#define WLAN_EID_FH_PARAMS 2
+#define WLAN_EID_DS_PARAMS 3
+#define WLAN_EID_CF_PARAMS 4
+#define WLAN_EID_TIM 5
+#define WLAN_EID_IBSS_PARAMS 6
+#define WLAN_EID_CHALLENGE 16
+/* EIDs defined by IEEE 802.11h - START */
+#define WLAN_EID_PWR_CONSTRAINT 32
+#define WLAN_EID_PWR_CAPABILITY 33
+#define WLAN_EID_TPC_REQUEST 34
+#define WLAN_EID_TPC_REPORT 35
+#define WLAN_EID_SUPPORTED_CHANNELS 36
+#define WLAN_EID_CHANNEL_SWITCH 37
+#define WLAN_EID_MEASURE_REQUEST 38
+#define WLAN_EID_MEASURE_REPORT 39
+#define WLAN_EID_QUITE 40
+#define WLAN_EID_IBSS_DFS 41
+/* EIDs defined by IEEE 802.11h - END */
+#define WLAN_EID_ERP_INFO 42
+#define WLAN_EID_HT_CAP 45
+#define WLAN_EID_RSN 48
+#define WLAN_EID_EXT_SUPP_RATES 50
+#define WLAN_EID_MOBILITY_DOMAIN 54
+#define WLAN_EID_FAST_BSS_TRANSITION 55
+#define WLAN_EID_TIMEOUT_INTERVAL 56
+#define WLAN_EID_RIC_DATA 57
+#define WLAN_EID_HT_OPERATION 61
+#define WLAN_EID_SECONDARY_CHANNEL_OFFSET 62
+#define WLAN_EID_20_40_BSS_COEXISTENCE 72
+#define WLAN_EID_20_40_BSS_INTOLERANT 73
+#define WLAN_EID_OVERLAPPING_BSS_SCAN_PARAMS 74
+#define WLAN_EID_MMIE 76
+#define WLAN_EID_VENDOR_SPECIFIC 221
+#define WLAN_EID_GENERIC (WLAN_EID_VENDOR_SPECIFIC)
+
+#define IEEE80211_MGMT_HDR_LEN 24
+#define IEEE80211_DATA_HDR3_LEN 24
+#define IEEE80211_DATA_HDR4_LEN 30
+
+
+#define IEEE80211_STATMASK_SIGNAL (1<<0)
+#define IEEE80211_STATMASK_RSSI (1<<1)
+#define IEEE80211_STATMASK_NOISE (1<<2)
+#define IEEE80211_STATMASK_RATE (1<<3)
+#define IEEE80211_STATMASK_WEMASK 0x7
+
+
+#define IEEE80211_CCK_MODULATION    (1<<0)
+#define IEEE80211_OFDM_MODULATION   (1<<1)
+
+#define IEEE80211_24GHZ_BAND     (1<<0)
+#define IEEE80211_52GHZ_BAND     (1<<1)
+
+#define IEEE80211_CCK_RATE_LEN			4
+#define IEEE80211_NUM_OFDM_RATESLEN	8
+
+
+#define IEEE80211_CCK_RATE_1MB			0x02
+#define IEEE80211_CCK_RATE_2MB			0x04
+#define IEEE80211_CCK_RATE_5MB			0x0B
+#define IEEE80211_CCK_RATE_11MB			0x16
+#define IEEE80211_OFDM_RATE_LEN			8
+#define IEEE80211_OFDM_RATE_6MB			0x0C
+#define IEEE80211_OFDM_RATE_9MB			0x12
+#define IEEE80211_OFDM_RATE_12MB		0x18
+#define IEEE80211_OFDM_RATE_18MB		0x24
+#define IEEE80211_OFDM_RATE_24MB		0x30
+#define IEEE80211_OFDM_RATE_36MB		0x48
+#define IEEE80211_OFDM_RATE_48MB		0x60
+#define IEEE80211_OFDM_RATE_54MB		0x6C
+#define IEEE80211_BASIC_RATE_MASK		0x80
+
+#define IEEE80211_CCK_RATE_1MB_MASK		(1<<0)
+#define IEEE80211_CCK_RATE_2MB_MASK		(1<<1)
+#define IEEE80211_CCK_RATE_5MB_MASK		(1<<2)
+#define IEEE80211_CCK_RATE_11MB_MASK		(1<<3)
+#define IEEE80211_OFDM_RATE_6MB_MASK		(1<<4)
+#define IEEE80211_OFDM_RATE_9MB_MASK		(1<<5)
+#define IEEE80211_OFDM_RATE_12MB_MASK		(1<<6)
+#define IEEE80211_OFDM_RATE_18MB_MASK		(1<<7)
+#define IEEE80211_OFDM_RATE_24MB_MASK		(1<<8)
+#define IEEE80211_OFDM_RATE_36MB_MASK		(1<<9)
+#define IEEE80211_OFDM_RATE_48MB_MASK		(1<<10)
+#define IEEE80211_OFDM_RATE_54MB_MASK		(1<<11)
+
+#define IEEE80211_CCK_RATES_MASK		0x0000000F
+#define IEEE80211_CCK_BASIC_RATES_MASK	(IEEE80211_CCK_RATE_1MB_MASK | \
+	IEEE80211_CCK_RATE_2MB_MASK)
+#define IEEE80211_CCK_DEFAULT_RATES_MASK				\
+	(IEEE80211_CCK_BASIC_RATES_MASK |				\
+	IEEE80211_CCK_RATE_5MB_MASK |					\
+	IEEE80211_CCK_RATE_11MB_MASK)
+
+#define IEEE80211_OFDM_RATES_MASK		0x00000FF0
+#define IEEE80211_OFDM_BASIC_RATES_MASK	(IEEE80211_OFDM_RATE_6MB_MASK | \
+	IEEE80211_OFDM_RATE_12MB_MASK |					\
+	IEEE80211_OFDM_RATE_24MB_MASK)
+#define IEEE80211_OFDM_DEFAULT_RATES_MASK				\
+	(IEEE80211_OFDM_BASIC_RATES_MASK |				\
+	IEEE80211_OFDM_RATE_9MB_MASK  |					\
+	IEEE80211_OFDM_RATE_18MB_MASK |					\
+	IEEE80211_OFDM_RATE_36MB_MASK |					\
+	IEEE80211_OFDM_RATE_48MB_MASK |					\
+	IEEE80211_OFDM_RATE_54MB_MASK)
+#define IEEE80211_DEFAULT_RATES_MASK					\
+	(IEEE80211_OFDM_DEFAULT_RATES_MASK |				\
+	 IEEE80211_CCK_DEFAULT_RATES_MASK)
+
+#define IEEE80211_NUM_OFDM_RATES	8
+#define IEEE80211_NUM_CCK_RATES		4
+#define IEEE80211_OFDM_SHIFT_MASK_A	4
+
+/* NOTE: This data is for statistical purposes; not all hardware provides this
+ *       information for frames received.  Not setting these will not cause
+ *       any adverse affects. */
+struct ieee80211_rx_stats {
+	/* u32 mac_time[2]; */
+	s8 rssi;
+	u8 signal;
+	u8 noise;
+	u8 received_channel;
+	u16 rate; /* in 100 kbps */
+	/* u8 control; */
+	u8 mask;
+	u8 freq;
+	u16 len;
+};
+
+/* IEEE 802.11 requires that STA supports concurrent reception of at least
+ * three fragmented frames. This define can be increased to support more
+ * concurrent frames, but it should be noted that each entry can consume about
+ * 2 kB of RAM and increasing cache size will slow down frame reassembly. */
+#define IEEE80211_FRAG_CACHE_LEN 4
+
+struct ieee80211_frag_entry {
+	u32 first_frag_time;
+	uint seq;
+	uint last_frag;
+	uint qos;   /* jackson */
+	uint tid;	/* jackson */
+	struct sk_buff *skb;
+	u8 src_addr[ETH_ALEN];
+	u8 dst_addr[ETH_ALEN];
+};
+
+struct ieee80211_stats {
+	uint tx_unicast_frames;
+	uint tx_multicast_frames;
+	uint tx_fragments;
+	uint tx_unicast_octets;
+	uint tx_multicast_octets;
+	uint tx_deferred_transmissions;
+	uint tx_single_retry_frames;
+	uint tx_multiple_retry_frames;
+	uint tx_retry_limit_exceeded;
+	uint tx_discards;
+	uint rx_unicast_frames;
+	uint rx_multicast_frames;
+	uint rx_fragments;
+	uint rx_unicast_octets;
+	uint rx_multicast_octets;
+	uint rx_fcs_errors;
+	uint rx_discards_no_buffer;
+	uint tx_discards_wrong_sa;
+	uint rx_discards_undecryptable;
+	uint rx_message_in_msg_fragments;
+	uint rx_message_in_bad_msg_fragments;
+};
+
+struct ieee80211_softmac_stats {
+	uint rx_ass_ok;
+	uint rx_ass_err;
+	uint rx_probe_rq;
+	uint tx_probe_rs;
+	uint tx_beacons;
+	uint rx_auth_rq;
+	uint rx_auth_rs_ok;
+	uint rx_auth_rs_err;
+	uint tx_auth_rq;
+	uint no_auth_rs;
+	uint no_ass_rs;
+	uint tx_ass_rq;
+	uint rx_ass_rq;
+	uint tx_probe_rq;
+	uint reassoc;
+	uint swtxstop;
+	uint swtxawake;
+};
+
+#define SEC_KEY_1	(1<<0)
+#define SEC_KEY_2	(1<<1)
+#define SEC_KEY_3	(1<<2)
+#define SEC_KEY_4	(1<<3)
+#define SEC_ACTIVE_KEY  (1<<4)
+#define SEC_AUTH_MODE   (1<<5)
+#define SEC_UNICAST_GROUP (1<<6)
+#define SEC_LEVEL	(1<<7)
+#define SEC_ENABLED     (1<<8)
+
+#define SEC_LEVEL_0      0 /* None */
+#define SEC_LEVEL_1      1 /* WEP 40 and 104 bit */
+#define SEC_LEVEL_2      2 /* Level 1 + TKIP */
+#define SEC_LEVEL_2_CKIP 3 /* Level 1 + CKIP */
+#define SEC_LEVEL_3      4 /* Level 2 + CCMP */
+
+#define WEP_KEYS 4
+#define WEP_KEY_LEN 13
+
+struct ieee80211_security {
+	u16 active_key:2,
+	enabled:1,
+	auth_mode:2,
+	auth_algo:4,
+	unicast_uses_group:1;
+	u8 key_sizes[WEP_KEYS];
+	u8 keys[WEP_KEYS][WEP_KEY_LEN];
+	u8 level;
+	u16 flags;
+} __packed;
+
+/*
+
+ 802.11 data frame from AP
+
+      ,-------------------------------------------------------------------.
+Bytes |  2   |  2   |    6    |    6    |    6    |  2   | 0..2312 |   4  |
+      |------|------|---------|---------|---------|------|---------|------|
+Desc. | ctrl | dura |  DA/RA  |   TA    |    SA   | Sequ |  frame  |  fcs |
+      |      | tion | (BSSID) |	 |	 | ence |  data   |      |
+      `-------------------------------------------------------------------'
+
+Total: 28-2340 bytes
+
+*/
+
+struct ieee80211_header_data {
+	u16 frame_ctl;
+	u16 duration_id;
+	u8 addr1[6];
+	u8 addr2[6];
+	u8 addr3[6];
+	u16 seq_ctrl;
+};
+
+#define BEACON_PROBE_SSID_ID_POSITION 12
+
+/* Management Frame Information Element Types */
+#define MFIE_TYPE_SSID		0
+#define MFIE_TYPE_RATES		1
+#define MFIE_TYPE_FH_SET	2
+#define MFIE_TYPE_DS_SET	3
+#define MFIE_TYPE_CF_SET	4
+#define MFIE_TYPE_TIM		5
+#define MFIE_TYPE_IBSS_SET	6
+#define MFIE_TYPE_CHALLENGE	16
+#define MFIE_TYPE_ERP		42
+#define MFIE_TYPE_RSN		48
+#define MFIE_TYPE_RATES_EX	50
+#define MFIE_TYPE_GENERIC	221
+
+struct ieee80211_info_element_hdr {
+	u8 id;
+	u8 len;
+} __packed;
+
+struct ieee80211_info_element {
+	u8 id;
+	u8 len;
+	u8 data[0];
+} __packed;
+
+/*
+ * These are the data types that can make up management packets
+ *
+	u16 auth_algorithm;
+	u16 auth_sequence;
+	u16 beacon_interval;
+	u16 capability;
+	u8 current_ap[ETH_ALEN];
+	u16 listen_interval;
+	struct {
+		u16 association_id:14, reserved:2;
+	} __packed;
+	u32 time_stamp[2];
+	u16 reason;
+	u16 status;
+*/
+
+#define IEEE80211_DEFAULT_TX_ESSID "Penguin"
+#define IEEE80211_DEFAULT_BASIC_RATE 10
+
+struct ieee80211_authentication {
+	struct ieee80211_header_data header;
+	u16 algorithm;
+	u16 transaction;
+	u16 status;
+	/* struct ieee80211_info_element_hdr info_element; */
+} __packed;
+
+struct ieee80211_probe_response {
+	struct ieee80211_header_data header;
+	u32 time_stamp[2];
+	u16 beacon_interval;
+	u16 capability;
+	struct ieee80211_info_element info_element;
+} __packed;
+
+struct ieee80211_probe_request {
+	struct ieee80211_header_data header;
+} __packed;
+
+struct ieee80211_assoc_request_frame {
+	struct rtw_ieee80211_hdr_3addr header;
+	u16 capability;
+	u16 listen_interval;
+	struct ieee80211_info_element_hdr info_element;
+} __packed;
+
+struct ieee80211_assoc_response_frame {
+	struct rtw_ieee80211_hdr_3addr header;
+	u16 capability;
+	u16 status;
+	u16 aid;
+} __packed;
+
+struct ieee80211_txb {
+	u8 nr_frags;
+	u8 encrypted;
+	u16 reserved;
+	u16 frag_size;
+	u16 payload_size;
+	struct sk_buff *fragments[0];
+};
+
+
+/* SWEEP TABLE ENTRIES NUMBER*/
+#define MAX_SWEEP_TAB_ENTRIES		  42
+#define MAX_SWEEP_TAB_ENTRIES_PER_PACKET  7
+/* MAX_RATES_LENGTH needs to be 12.  The spec says 8, and many APs
+ * only use 8, and then use extended rates for the remaining supported
+ * rates.  Other APs, however, stick all of their supported rates on the
+ * main rates information element... */
+#define MAX_RATES_LENGTH		((u8)12)
+#define MAX_RATES_EX_LENGTH		((u8)16)
+#define MAX_NETWORK_COUNT		128
+#define MAX_CHANNEL_NUMBER		161
+#define IEEE80211_SOFTMAC_SCAN_TIME	400
+/* HZ / 2) */
+#define IEEE80211_SOFTMAC_ASSOC_RETRY_TIME (HZ * 2)
+
+#define CRC_LENGTH		 4U
+
+#define MAX_WPA_IE_LEN (256)
+#define MAX_WPS_IE_LEN (512)
+#define MAX_P2P_IE_LEN (256)
+#define MAX_WFD_IE_LEN (128)
+
+#define NETWORK_EMPTY_ESSID (1<<0)
+#define NETWORK_HAS_OFDM    (1<<1)
+#define NETWORK_HAS_CCK     (1<<2)
+
+#define IEEE80211_DTIM_MBCAST 4
+#define IEEE80211_DTIM_UCAST 2
+#define IEEE80211_DTIM_VALID 1
+#define IEEE80211_DTIM_INVALID 0
+
+#define IEEE80211_PS_DISABLED 0
+#define IEEE80211_PS_UNICAST IEEE80211_DTIM_UCAST
+#define IEEE80211_PS_MBCAST IEEE80211_DTIM_MBCAST
+#define IW_ESSID_MAX_SIZE 32
+/*
+join_res:
+-1: authentication fail
+-2: association fail
+> 0: TID
+*/
+
+enum ieee80211_state {
+	/* the card is not linked at all */
+	IEEE80211_NOLINK = 0,
+
+	/* IEEE80211_ASSOCIATING* are for BSS client mode
+	 * the driver shall not perform RX filtering unless
+	 * the state is LINKED.
+	 * The driver shall just check for the state LINKED and
+	 * defaults to NOLINK for ALL the other states (including
+	 * LINKED_SCANNING)
+	 */
+
+	/* the association procedure will start (wq scheduling)*/
+	IEEE80211_ASSOCIATING,
+	IEEE80211_ASSOCIATING_RETRY,
+
+	/* the association procedure is sending AUTH request*/
+	IEEE80211_ASSOCIATING_AUTHENTICATING,
+
+	/* the association procedure has successfully authentcated
+	 * and is sending association request
+	 */
+	IEEE80211_ASSOCIATING_AUTHENTICATED,
+
+	/* the link is ok. the card associated to a BSS or linked
+	 * to a ibss cell or acting as an AP and creating the bss
+	 */
+	IEEE80211_LINKED,
+
+	/* same as LINKED, but the driver shall apply RX filter
+	 * rules as we are in NO_LINK mode. As the card is still
+	 * logically linked, but it is doing a syncro site survey
+	 * then it will be back to LINKED state.
+	 */
+	IEEE80211_LINKED_SCANNING,
+
+};
+
+#define DEFAULT_MAX_SCAN_AGE (15 * HZ)
+#define DEFAULT_FTS 2346
+
+static inline int is_multicast_mac_addr(const u8 *addr)
+{
+	return ((addr[0] != 0xff) && (0x01 & addr[0]));
+}
+
+static inline int is_broadcast_mac_addr(const u8 *addr)
+{
+	return (addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&
+	       (addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff);
+}
+
+#define CFG_IEEE80211_RESERVE_FCS (1<<0)
+#define CFG_IEEE80211_COMPUTE_FCS (1<<1)
+
+struct tx_pending {
+	int frag;
+	struct ieee80211_txb *txb;
+};
+
+#define MAXTID	16
+
+#define IEEE_A	    (1<<0)
+#define IEEE_B	    (1<<1)
+#define IEEE_G	    (1<<2)
+#define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
+
+/* Baron move to ieee80211.c */
+int ieee80211_is_empty_essid(const char *essid, int essid_len);
+int ieee80211_get_hdrlen(u16 fc);
+
+/* Action category code */
+enum rtw_ieee80211_category {
+	RTW_WLAN_CATEGORY_SPECTRUM_MGMT = 0,
+	RTW_WLAN_CATEGORY_QOS = 1,
+	RTW_WLAN_CATEGORY_DLS = 2,
+	RTW_WLAN_CATEGORY_BACK = 3,
+	RTW_WLAN_CATEGORY_PUBLIC = 4, /* IEEE 802.11 public action frames */
+	RTW_WLAN_CATEGORY_RADIO_MEASUREMENT  = 5,
+	RTW_WLAN_CATEGORY_FT = 6,
+	RTW_WLAN_CATEGORY_HT = 7,
+	RTW_WLAN_CATEGORY_SA_QUERY = 8,
+	RTW_WLAN_CATEGORY_TDLS = 12,
+	RTW_WLAN_CATEGORY_WMM = 17,
+	RTW_WLAN_CATEGORY_P2P = 0x7f,/* P2P action frames */
+};
+
+/* SPECTRUM_MGMT action code */
+enum rtw_ieee80211_spectrum_mgmt_actioncode {
+	RTW_WLAN_ACTION_SPCT_MSR_REQ = 0,
+	RTW_WLAN_ACTION_SPCT_MSR_RPRT = 1,
+	RTW_WLAN_ACTION_SPCT_TPC_REQ = 2,
+	RTW_WLAN_ACTION_SPCT_TPC_RPRT = 3,
+	RTW_WLAN_ACTION_SPCT_CHL_SWITCH = 4,
+	RTW_WLAN_ACTION_SPCT_EXT_CHL_SWITCH = 5,
+};
+
+enum _PUBLIC_ACTION {
+	ACT_PUBLIC_BSSCOEXIST = 0, /*  20/40 BSS Coexistence */
+	ACT_PUBLIC_DSE_ENABLE = 1,
+	ACT_PUBLIC_DSE_DEENABLE = 2,
+	ACT_PUBLIC_DSE_REG_LOCATION = 3,
+	ACT_PUBLIC_EXT_CHL_SWITCH = 4,
+	ACT_PUBLIC_DSE_MSR_REQ = 5,
+	ACT_PUBLIC_DSE_MSR_RPRT = 6,
+	ACT_PUBLIC_MP = 7, /*  Measurement Pilot */
+	ACT_PUBLIC_DSE_PWR_CONSTRAINT = 8,
+	ACT_PUBLIC_VENDOR = 9, /*  for WIFI_DIRECT */
+	ACT_PUBLIC_GAS_INITIAL_REQ = 10,
+	ACT_PUBLIC_GAS_INITIAL_RSP = 11,
+	ACT_PUBLIC_GAS_COMEBACK_REQ = 12,
+	ACT_PUBLIC_GAS_COMEBACK_RSP = 13,
+	ACT_PUBLIC_TDLS_DISCOVERY_RSP = 14,
+	ACT_PUBLIC_LOCATION_TRACK = 15,
+	ACT_PUBLIC_MAX
+};
+
+/* BACK action code */
+enum rtw_ieee80211_back_actioncode {
+	RTW_WLAN_ACTION_ADDBA_REQ = 0,
+	RTW_WLAN_ACTION_ADDBA_RESP = 1,
+	RTW_WLAN_ACTION_DELBA = 2,
+};
+
+/* HT features action code */
+enum rtw_ieee80211_ht_actioncode {
+	RTW_WLAN_ACTION_NOTIFY_CH_WIDTH = 0,
+	RTW_WLAN_ACTION_SM_PS = 1,
+	RTW_WLAN_ACTION_PSPM = 2,
+	RTW_WLAN_ACTION_PCO_PHASE = 3,
+	RTW_WLAN_ACTION_MIMO_CSI_MX = 4,
+	RTW_WLAN_ACTION_MIMO_NONCP_BF = 5,
+	RTW_WLAN_ACTION_MIMP_CP_BF = 6,
+	RTW_WLAN_ACTION_ASEL_INDICATES_FB = 7,
+	RTW_WLAN_ACTION_HI_INFO_EXCHG = 8,
+};
+
+/* BACK (block-ack) parties */
+enum rtw_ieee80211_back_parties {
+	RTW_WLAN_BACK_RECIPIENT = 0,
+	RTW_WLAN_BACK_INITIATOR = 1,
+	RTW_WLAN_BACK_TIMER = 2,
+};
+
+#define OUI_MICROSOFT 0x0050f2 /* Microsoft (also used in Wi-Fi specs)
+				* 00:50:F2 */
+#define WME_OUI_TYPE 2
+#define WME_OUI_SUBTYPE_INFORMATION_ELEMENT 0
+#define WME_OUI_SUBTYPE_PARAMETER_ELEMENT 1
+#define WME_OUI_SUBTYPE_TSPEC_ELEMENT 2
+#define WME_VERSION 1
+
+#define WME_ACTION_CODE_SETUP_REQUEST 0
+#define WME_ACTION_CODE_SETUP_RESPONSE 1
+#define WME_ACTION_CODE_TEARDOWN 2
+
+#define WME_SETUP_RESPONSE_STATUS_ADMISSION_ACCEPTED 0
+#define WME_SETUP_RESPONSE_STATUS_INVALID_PARAMETERS 1
+#define WME_SETUP_RESPONSE_STATUS_REFUSED 3
+
+#define WME_TSPEC_DIRECTION_UPLINK 0
+#define WME_TSPEC_DIRECTION_DOWNLINK 1
+#define WME_TSPEC_DIRECTION_BI_DIRECTIONAL 3
+
+
+#define OUI_BROADCOM 0x00904c /* Broadcom (Epigram) */
+
+#define VENDOR_HT_CAPAB_OUI_TYPE 0x33 /* 00-90-4c:0x33 */
+
+/**
+ * enum rtw_ieee80211_channel_flags - channel flags
+ *
+ * Channel flags set by the regulatory control code.
+ *
+ * @RTW_IEEE80211_CHAN_DISABLED: This channel is disabled.
+ * @RTW_IEEE80211_CHAN_PASSIVE_SCAN: Only passive scanning is permitted
+ *      on this channel.
+ * @RTW_IEEE80211_CHAN_NO_IBSS: IBSS is not allowed on this channel.
+ * @RTW_IEEE80211_CHAN_RADAR: Radar detection is required on this channel.
+ * @RTW_IEEE80211_CHAN_NO_HT40PLUS: extension channel above this channel
+ *      is not permitted.
+ * @RTW_IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel
+ *      is not permitted.
+ */
+enum rtw_ieee80211_channel_flags {
+	RTW_IEEE80211_CHAN_DISABLED	 = 1<<0,
+	RTW_IEEE80211_CHAN_PASSIVE_SCAN     = 1<<1,
+	RTW_IEEE80211_CHAN_NO_IBSS	  = 1<<2,
+	RTW_IEEE80211_CHAN_RADAR	    = 1<<3,
+	RTW_IEEE80211_CHAN_NO_HT40PLUS      = 1<<4,
+	RTW_IEEE80211_CHAN_NO_HT40MINUS     = 1<<5,
+};
+
+#define RTW_IEEE80211_CHAN_NO_HT40 \
+	  (RTW_IEEE80211_CHAN_NO_HT40PLUS | RTW_IEEE80211_CHAN_NO_HT40MINUS)
+
+/* Represent channel details, subset of ieee80211_channel */
+struct rtw_ieee80211_channel {
+	u16 hw_value;
+	u32 flags;
+};
+
+#define CHAN_FMT \
+	"hw_value:%u, " \
+	"flags:0x%08x" \
+
+#define CHAN_ARG(channel) \
+	(channel)->hw_value \
+	, (channel)->flags \
+
+/* Parsed Information Elements */
+struct rtw_ieee802_11_elems {
+	u8 *ssid;
+	u8 ssid_len;
+	u8 *supp_rates;
+	u8 supp_rates_len;
+	u8 *fh_params;
+	u8 fh_params_len;
+	u8 *ds_params;
+	u8 ds_params_len;
+	u8 *cf_params;
+	u8 cf_params_len;
+	u8 *tim;
+	u8 tim_len;
+	u8 *ibss_params;
+	u8 ibss_params_len;
+	u8 *challenge;
+	u8 challenge_len;
+	u8 *erp_info;
+	u8 erp_info_len;
+	u8 *ext_supp_rates;
+	u8 ext_supp_rates_len;
+	u8 *wpa_ie;
+	u8 wpa_ie_len;
+	u8 *rsn_ie;
+	u8 rsn_ie_len;
+	u8 *wme;
+	u8 wme_len;
+	u8 *wme_tspec;
+	u8 wme_tspec_len;
+	u8 *wps_ie;
+	u8 wps_ie_len;
+	u8 *power_cap;
+	u8 power_cap_len;
+	u8 *supp_channels;
+	u8 supp_channels_len;
+	u8 *mdie;
+	u8 mdie_len;
+	u8 *ftie;
+	u8 ftie_len;
+	u8 *timeout_int;
+	u8 timeout_int_len;
+	u8 *ht_capabilities;
+	u8 ht_capabilities_len;
+	u8 *ht_operation;
+	u8 ht_operation_len;
+	u8 *vendor_ht_cap;
+	u8 vendor_ht_cap_len;
+};
+
+enum parse_res {
+	ParseOK = 0,
+	ParseUnknown = 1,
+	ParseFailed = -1
+};
+
+enum parse_res rtw_ieee802_11_parse_elems(u8 *start, uint len,
+					  struct rtw_ieee802_11_elems *elems,
+					  int show_errors);
+
+u8 *rtw_set_fixed_ie(unsigned char *pbuf, unsigned int len,
+		     unsigned char *source, unsigned int *frlen);
+u8 *rtw_set_ie(u8 *pbuf, int index, uint len, u8 *source, uint *frlen);
+
+enum secondary_ch_offset {
+	SCN = 0, /* no secondary channel */
+	SCA = 1, /* secondary channel above */
+	SCB = 3,  /* secondary channel below */
+};
+u8 secondary_ch_offset_to_hal_ch_offset(u8 ch_offset);
+u8 hal_ch_offset_to_secondary_ch_offset(u8 ch_offset);
+u8 *rtw_set_ie_ch_switch(u8 *buf, u32 *buf_len, u8 ch_switch_mode,
+			 u8 new_ch, u8 ch_switch_cnt);
+u8 *rtw_set_ie_secondary_ch_offset(u8 *buf, u32 *buf_len,
+				   u8 secondary_ch_offset);
+u8 *rtw_set_ie_mesh_ch_switch_parm(u8 *buf, u32 *buf_len, u8 ttl,
+				   u8 flags, u16 reason, u16 precedence);
+
+u8 *rtw_get_ie(u8 *pbuf, int index, int *len, int limit);
+u8 *rtw_get_ie_ex(u8 *in_ie, uint in_len, u8 eid, u8 *oui,
+		  u8 oui_len, u8 *ie, uint *ielen);
+int rtw_ies_remove_ie(u8 *ies, uint *ies_len, uint offset,
+		      u8 eid, u8 *oui, u8 oui_len);
+
+void rtw_set_supported_rate(u8 *SupportedRates, uint mode);
+
+unsigned char *rtw_get_wpa_ie(unsigned char *pie, int *wpa_ie_len, int limit);
+unsigned char *rtw_get_wpa2_ie(unsigned char *pie, int *rsn_ie_len, int limit);
+int rtw_get_wpa_cipher_suite(u8 *s);
+int rtw_get_wpa2_cipher_suite(u8 *s);
+int rtw_get_wapi_ie(u8 *in_ie, uint in_len, u8 *wapi_ie, u16 *wapi_len);
+int rtw_parse_wpa_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher,
+		     int *pairwise_cipher, int *is_8021x);
+int rtw_parse_wpa2_ie(u8 *wpa_ie, int wpa_ie_len, int *group_cipher,
+		      int *pairwise_cipher, int *is_8021x);
+
+int rtw_get_sec_ie(u8 *in_ie, uint in_len, u8 *rsn_ie, u16 *rsn_len,
+		   u8 *wpa_ie, u16 *wpa_len);
+
+u8 rtw_is_wps_ie(u8 *ie_ptr, uint *wps_ielen);
+u8 *rtw_get_wps_ie(u8 *in_ie, uint in_len, u8 *wps_ie, uint *wps_ielen);
+u8 *rtw_get_wps_attr(u8 *wps_ie, uint wps_ielen, u16 target_attr_id,
+		     u8 *buf_attr, u32 *len_attr);
+u8 *rtw_get_wps_attr_content(u8 *wps_ie, uint wps_ielen, u16 target_attr_id,
+			     u8 *buf_content, uint *len_content);
+
+/**
+ * for_each_ie - iterate over continuous IEs
+ * @ie:
+ * @buf:
+ * @buf_len:
+ */
+#define for_each_ie(ie, buf, buf_len) \
+	for (ie = (void *)buf; (((u8 *)ie) - ((u8 *)buf) + 1) < buf_len;	\
+		ie = (void *)(((u8 *)ie) + *(((u8 *)ie)+1) + 2))
+
+void dump_ies(u8 *buf, u32 buf_len);
+void dump_wps_ie(u8 *ie, u32 ie_len);
+
+#ifdef CONFIG_88EU_P2P
+void dump_p2p_ie(u8 *ie, u32 ie_len);
+u8 *rtw_get_p2p_ie(u8 *in_ie, int in_len, u8 *p2p_ie, uint *p2p_ielen);
+u8 *rtw_get_p2p_attr(u8 *p2p_ie, uint p2p_ielen, u8 target_attr_id,
+		     u8 *buf_attr, u32 *len_attr);
+u8 *rtw_get_p2p_attr_content(u8 *p2p_ie, uint p2p_ielen, u8 target_attr_id,
+			     u8 *buf_content, uint *len_content);
+u32 rtw_set_p2p_attr_content(u8 *pbuf, u8 attr_id, u16 attr_len,
+			     u8 *pdata_attr);
+void rtw_wlan_bssid_ex_remove_p2p_attr(struct wlan_bssid_ex *bss_ex,
+				       u8 attr_id);
+#endif
+
+uint	rtw_get_rateset_len(u8	*rateset);
+
+struct registry_priv;
+int rtw_generate_ie(struct registry_priv *pregistrypriv);
+
+
+int rtw_get_bit_value_from_ieee_value(u8 val);
+
+uint	rtw_is_cckrates_included(u8 *rate);
+
+uint	rtw_is_cckratesonly_included(u8 *rate);
+
+int rtw_check_network_type(unsigned char *rate, int ratelen, int channel);
+
+void rtw_get_bcn_info(struct wlan_network *pnetwork);
+
+void rtw_macaddr_cfg(u8 *mac_addr);
+
+u16 rtw_mcs_rate(u8 rf_type, u8 bw_40MHz, u8 short_GI_20, u8 short_GI_40,
+		 unsigned char *MCS_rate);
+
+int rtw_action_frame_parse(const u8 *frame, u32 frame_len, u8 *category,
+			   u8 *action);
+const char *action_public_str(u8 action);
+
+#endif /* IEEE80211_H */

drivers/staging/rtl8188eu/include/ieee80211_ext.h

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __IEEE80211_EXT_H
+#define __IEEE80211_EXT_H
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+#define WMM_OUI_TYPE 2
+#define WMM_OUI_SUBTYPE_INFORMATION_ELEMENT 0
+#define WMM_OUI_SUBTYPE_PARAMETER_ELEMENT 1
+#define WMM_OUI_SUBTYPE_TSPEC_ELEMENT 2
+#define WMM_VERSION 1
+
+#define WPA_PROTO_WPA BIT(0)
+#define WPA_PROTO_RSN BIT(1)
+
+#define WPA_KEY_MGMT_IEEE8021X BIT(0)
+#define WPA_KEY_MGMT_PSK BIT(1)
+#define WPA_KEY_MGMT_NONE BIT(2)
+#define WPA_KEY_MGMT_IEEE8021X_NO_WPA BIT(3)
+#define WPA_KEY_MGMT_WPA_NONE BIT(4)
+
+
+#define WPA_CAPABILITY_PREAUTH BIT(0)
+#define WPA_CAPABILITY_MGMT_FRAME_PROTECTION BIT(6)
+#define WPA_CAPABILITY_PEERKEY_ENABLED BIT(9)
+
+
+#define PMKID_LEN 16
+
+
+struct wpa_ie_hdr {
+	u8 elem_id;
+	u8 len;
+	u8 oui[4]; /* 24-bit OUI followed by 8-bit OUI type */
+	u8 version[2]; /* little endian */
+} __packed;
+
+struct rsn_ie_hdr {
+	u8 elem_id; /* WLAN_EID_RSN */
+	u8 len;
+	u8 version[2]; /* little endian */
+} __packed;
+
+struct wme_ac_parameter {
+#if defined(__LITTLE_ENDIAN)
+	/* byte 1 */
+	u8	aifsn:4,
+		acm:1,
+		aci:2,
+		reserved:1;
+
+	/* byte 2 */
+	u8	eCWmin:4,
+		eCWmax:4;
+#elif defined(__BIG_ENDIAN)
+	/* byte 1 */
+	u8	reserved:1,
+		aci:2,
+		acm:1,
+		aifsn:4;
+
+	/* byte 2 */
+	u8	eCWmax:4,
+		eCWmin:4;
+#else
+#error	"Please fix <endian.h>"
+#endif
+
+	/* bytes 3 & 4 */
+	u16 txopLimit;
+} __packed;
+
+struct wme_parameter_element {
+	/* required fields for WME version 1 */
+	u8 oui[3];
+	u8 oui_type;
+	u8 oui_subtype;
+	u8 version;
+	u8 acInfo;
+	u8 reserved;
+	struct wme_ac_parameter ac[4];
+
+} __packed;
+
+#define WPA_PUT_LE16(a, val)			\
+	do {					\
+		(a)[1] = ((u16) (val)) >> 8;	\
+		(a)[0] = ((u16) (val)) & 0xff;	\
+	} while (0)
+
+#define WPA_PUT_BE32(a, val)					\
+	do {							\
+		(a)[0] = (u8) ((((u32) (val)) >> 24) & 0xff);	\
+		(a)[1] = (u8) ((((u32) (val)) >> 16) & 0xff);	\
+		(a)[2] = (u8) ((((u32) (val)) >> 8) & 0xff);	\
+		(a)[3] = (u8) (((u32) (val)) & 0xff);		\
+	} while (0)
+
+#define WPA_PUT_LE32(a, val)					\
+	do {							\
+		(a)[3] = (u8) ((((u32) (val)) >> 24) & 0xff);	\
+		(a)[2] = (u8) ((((u32) (val)) >> 16) & 0xff);	\
+		(a)[1] = (u8) ((((u32) (val)) >> 8) & 0xff);	\
+		(a)[0] = (u8) (((u32) (val)) & 0xff);		\
+	} while (0)
+
+#define RSN_SELECTOR_PUT(a, val) WPA_PUT_BE32((u8 *)(a), (val))
+
+/* Action category code */
+enum ieee80211_category {
+	WLAN_CATEGORY_SPECTRUM_MGMT = 0,
+	WLAN_CATEGORY_QOS = 1,
+	WLAN_CATEGORY_DLS = 2,
+	WLAN_CATEGORY_BACK = 3,
+	WLAN_CATEGORY_HT = 7,
+	WLAN_CATEGORY_WMM = 17,
+};
+
+/* SPECTRUM_MGMT action code */
+enum ieee80211_spectrum_mgmt_actioncode {
+	WLAN_ACTION_SPCT_MSR_REQ = 0,
+	WLAN_ACTION_SPCT_MSR_RPRT = 1,
+	WLAN_ACTION_SPCT_TPC_REQ = 2,
+	WLAN_ACTION_SPCT_TPC_RPRT = 3,
+	WLAN_ACTION_SPCT_CHL_SWITCH = 4,
+	WLAN_ACTION_SPCT_EXT_CHL_SWITCH = 5,
+};
+
+/* BACK action code */
+enum ieee80211_back_actioncode {
+	WLAN_ACTION_ADDBA_REQ = 0,
+	WLAN_ACTION_ADDBA_RESP = 1,
+	WLAN_ACTION_DELBA = 2,
+};
+
+/* HT features action code */
+enum ieee80211_ht_actioncode {
+	WLAN_ACTION_NOTIFY_CH_WIDTH = 0,
+	WLAN_ACTION_SM_PS = 1,
+	WLAN_ACTION_PSPM = 2,
+	WLAN_ACTION_PCO_PHASE = 3,
+	WLAN_ACTION_MIMO_CSI_MX = 4,
+	WLAN_ACTION_MIMO_NONCP_BF = 5,
+	WLAN_ACTION_MIMP_CP_BF = 6,
+	WLAN_ACTION_ASEL_INDICATES_FB = 7,
+	WLAN_ACTION_HI_INFO_EXCHG = 8,
+};
+
+/* BACK (block-ack) parties */
+enum ieee80211_back_parties {
+	WLAN_BACK_RECIPIENT = 0,
+	WLAN_BACK_INITIATOR = 1,
+	WLAN_BACK_TIMER = 2,
+};
+
+struct ieee80211_mgmt {
+	u16 frame_control;
+	u16 duration;
+	u8 da[6];
+	u8 sa[6];
+	u8 bssid[6];
+	u16 seq_ctrl;
+	union {
+		struct {
+			u16 auth_alg;
+			u16 auth_transaction;
+			u16 status_code;
+			/* possibly followed by Challenge text */
+			u8 variable[0];
+		}  __packed auth;
+		struct {
+			u16 reason_code;
+		}  __packed deauth;
+		struct {
+			u16 capab_info;
+			u16 listen_interval;
+			/* followed by SSID and Supported rates */
+			u8 variable[0];
+		}  __packed assoc_req;
+		struct {
+			u16 capab_info;
+			u16 status_code;
+			u16 aid;
+			/* followed by Supported rates */
+			u8 variable[0];
+		}  __packed assoc_resp, reassoc_resp;
+		struct {
+			u16 capab_info;
+			u16 listen_interval;
+			u8 current_ap[6];
+			/* followed by SSID and Supported rates */
+			u8 variable[0];
+		}  __packed reassoc_req;
+		struct {
+			u16 reason_code;
+		}  __packed disassoc;
+		struct {
+			__le64 timestamp;
+			u16 beacon_int;
+			u16 capab_info;
+			/* followed by some of SSID, Supported rates,
+			 * FH Params, DS Params, CF Params, IBSS Params, TIM */
+			u8 variable[0];
+		}  __packed beacon;
+		struct {
+			/* only variable items: SSID, Supported rates */
+			u8 variable[0];
+		}  __packed probe_req;
+		struct {
+			__le64 timestamp;
+			u16 beacon_int;
+			u16 capab_info;
+			/* followed by some of SSID, Supported rates,
+			 * FH Params, DS Params, CF Params, IBSS Params */
+			u8 variable[0];
+		}  __packed probe_resp;
+		struct {
+			u8 category;
+			union {
+				struct {
+					u8 action_code;
+					u8 dialog_token;
+					u8 status_code;
+					u8 variable[0];
+				}  __packed wme_action;
+				struct {
+					u8 action_code;
+					u8 dialog_token;
+					u16 capab;
+					u16 timeout;
+					u16 start_seq_num;
+				}  __packed addba_req;
+				struct {
+					u8 action_code;
+					u8 dialog_token;
+					u16 status;
+					u16 capab;
+					u16 timeout;
+				}  __packed addba_resp;
+				struct {
+					u8 action_code;
+					u16 params;
+					u16 reason_code;
+				}  __packed delba;
+				structi {
+					u8 action_code;
+					/* capab_info for open and confirm,
+					 * reason for close
+					 */
+					u16 aux;
+					/* Followed in plink_confirm by status
+					 * code, AID and supported rates,
+					 * and directly by supported rates in
+					 * plink_open and plink_close
+					 */
+					u8 variable[0];
+				}  __packed plink_action;
+				struct{
+					u8 action_code;
+					u8 variable[0];
+				}  __packed mesh_action;
+			} __packed u;
+		}  __packed action;
+	} __packed u;
+} __packed;
+
+/* mgmt header + 1 byte category code */
+#define IEEE80211_MIN_ACTION_SIZE				\
+	 FIELD_OFFSET(struct ieee80211_mgmt, u.action.u)
+
+#endif

drivers/staging/rtl8188eu/include/if_ether.h

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+#ifndef _LINUX_IF_ETHER_H
+#define _LINUX_IF_ETHER_H
+
+/*
+ *	IEEE 802.3 Ethernet magic constants.  The frame sizes omit the preamble
+ *	and FCS/CRC (frame check sequence).
+ */
+
+#define ETH_ALEN	6		/* Octets in one ethernet addr	 */
+#define ETH_HLEN	14		/* Total octets in header.	 */
+#define ETH_ZLEN	60		/* Min. octets in frame sans FCS */
+#define ETH_DATA_LEN	1500		/* Max. octets in payload	 */
+#define ETH_FRAME_LEN	1514		/* Max. octets in frame sans FCS */
+
+/*
+ *	These are the defined Ethernet Protocol ID's.
+ */
+
+#define ETH_P_LOOP	0x0060		/* Ethernet Loopback packet	*/
+#define ETH_P_PUP	0x0200		/* Xerox PUP packet		*/
+#define ETH_P_PUPAT	0x0201		/* Xerox PUP Addr Trans packet	*/
+#define ETH_P_IP	0x0800		/* Internet Protocol packet	*/
+#define ETH_P_X25	0x0805		/* CCITT X.25			*/
+#define ETH_P_ARP	0x0806		/* Address Resolution packet	*/
+#define	ETH_P_BPQ	0x08FF		/* G8BPQ AX.25 Ethernet Packet  */
+#define ETH_P_IEEEPUP	0x0a00		/* Xerox IEEE802.3 PUP packet   */
+#define ETH_P_IEEEPUPAT	0x0a01		/* Xerox IEEE802.3 PUP		*/
+#define ETH_P_DEC       0x6000          /* DEC Assigned proto           */
+#define ETH_P_DNA_DL    0x6001          /* DEC DNA Dump/Load            */
+#define ETH_P_DNA_RC    0x6002          /* DEC DNA Remote Console       */
+#define ETH_P_DNA_RT    0x6003          /* DEC DNA Routing              */
+#define ETH_P_LAT       0x6004          /* DEC LAT                      */
+#define ETH_P_DIAG      0x6005          /* DEC Diagnostics              */
+#define ETH_P_CUST      0x6006          /* DEC Customer use             */
+#define ETH_P_SCA       0x6007          /* DEC Systems Comms Arch       */
+#define ETH_P_RARP      0x8035		/* Reverse Addr Res packet	*/
+#define ETH_P_ATALK	0x809B		/* Appletalk DDP		*/
+#define ETH_P_AARP	0x80F3		/* Appletalk AARP		*/
+#define ETH_P_8021Q	0x8100          /* 802.1Q VLAN Extended Header  */
+#define ETH_P_IPX	0x8137		/* IPX over DIX			*/
+#define ETH_P_IPV6	0x86DD		/* IPv6 over bluebook		*/
+#define ETH_P_PPP_DISC	0x8863		/* PPPoE discovery messages     */
+#define ETH_P_PPP_SES	0x8864		/* PPPoE session messages	*/
+#define ETH_P_ATMMPOA	0x884c		/* MultiProtocol Over ATM	*/
+#define ETH_P_ATMFATE	0x8884		/* Frame-based ATM Transport
+					 * over Ethernet
+					 */
+
+/*
+ *	Non DIX types. Won't clash for 1500 types.
+ */
+
+#define ETH_P_802_3	0x0001		/* Dummy type for 802.3 frames  */
+#define ETH_P_AX25	0x0002		/* Dummy protocol id for AX.25  */
+#define ETH_P_ALL	0x0003		/* Every packet (be careful!!!) */
+#define ETH_P_802_2	0x0004		/* 802.2 frames			*/
+#define ETH_P_SNAP	0x0005		/* Internal only		*/
+#define ETH_P_DDCMP     0x0006          /* DEC DDCMP: Internal only     */
+#define ETH_P_WAN_PPP   0x0007          /* Dummy type for WAN PPP frames*/
+#define ETH_P_PPP_MP    0x0008          /* Dummy type for PPP MP frames */
+#define ETH_P_LOCALTALK 0x0009		/* Localtalk pseudo type	*/
+#define ETH_P_PPPTALK	0x0010		/* Dummy type for Atalk over PPP*/
+#define ETH_P_TR_802_2	0x0011		/* 802.2 frames			*/
+#define ETH_P_MOBITEX	0x0015		/* Mobitex (kaz@cafe.net)	*/
+#define ETH_P_CONTROL	0x0016		/* Card specific control frames */
+#define ETH_P_IRDA	0x0017		/* Linux-IrDA			*/
+#define ETH_P_ECONET	0x0018		/* Acorn Econet			*/
+
+/*
+ *	This is an Ethernet frame header.
+ */
+
+struct ethhdr {
+	unsigned char	h_dest[ETH_ALEN];	/* destination eth addr	*/
+	unsigned char	h_source[ETH_ALEN];	/* source ether addr	*/
+	unsigned short	h_proto;		/* packet type ID field	*/
+};
+
+struct _vlan {
+	unsigned short       h_vlan_TCI;	/*  Encap prio and VLAN ID */
+	unsigned short       h_vlan_encapsulated_proto;
+};
+
+#define get_vlan_id(pvlan)				\
+	((ntohs((unsigned short)pvlan->h_vlan_TCI)) & 0xfff)
+#define get_vlan_priority(pvlan)			\
+	((ntohs((unsigned short)pvlan->h_vlan_TCI))>>13)
+#define get_vlan_encap_proto(pvlan)			\
+	 (ntohs((unsigned short)pvlan->h_vlan_encapsulated_proto))
+
+#endif	/* _LINUX_IF_ETHER_H */

drivers/staging/rtl8188eu/include/ioctl_cfg80211.h

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef __IOCTL_CFG80211_H__
+#define __IOCTL_CFG80211_H__
+
+struct rtw_wdev_invit_info {
+	u8 token;
+	u8 flags;
+	u8 status;
+	u8 req_op_ch;
+	u8 rsp_op_ch;
+};
+
+#define rtw_wdev_invit_info_init(invit_info) \
+	do { \
+		(invit_info)->token = 0; \
+		(invit_info)->flags = 0x00; \
+		(invit_info)->status = 0xff; \
+		(invit_info)->req_op_ch = 0; \
+		(invit_info)->rsp_op_ch = 0; \
+	} while (0)
+
+struct rtw_wdev_priv {
+	struct wireless_dev *rtw_wdev;
+
+	struct adapter *padapter;
+
+	struct cfg80211_scan_request *scan_request;
+	spinlock_t scan_req_lock;
+
+	struct net_device *pmon_ndev;/* for monitor interface */
+	char ifname_mon[IFNAMSIZ + 1]; /* name of monitor interface */
+
+	u8 p2p_enabled;
+
+	u8 provdisc_req_issued;
+
+	struct rtw_wdev_invit_info invit_info;
+
+	u8 bandroid_scan;
+	bool block;
+	bool power_mgmt;
+};
+
+#define wdev_to_priv(w) ((struct rtw_wdev_priv *)(wdev_priv(w)))
+
+#define wiphy_to_wdev(x)				\
+((struct wireless_dev *)(((struct rtw_wdev_priv *)wiphy_priv(x))->rtw_wdev))
+
+int rtw_wdev_alloc(struct adapter *padapter, struct device *dev);
+void rtw_wdev_free(struct wireless_dev *wdev);
+void rtw_wdev_unregister(struct wireless_dev *wdev);
+
+void rtw_cfg80211_init_wiphy(struct adapter *padapter);
+
+void rtw_cfg80211_surveydone_event_callback(struct adapter *padapter);
+
+void rtw_cfg80211_indicate_connect(struct adapter *padapter);
+void rtw_cfg80211_indicate_disconnect(struct adapter *padapter);
+void rtw_cfg80211_indicate_scan_done(struct rtw_wdev_priv *pwdev_priv,
+				     bool aborted);
+
+#ifdef CONFIG_88EU_AP_MODE
+void rtw_cfg80211_indicate_sta_assoc(struct adapter *padapter,
+				     u8 *pmgmt_frame, uint frame_len);
+void rtw_cfg80211_indicate_sta_disassoc(struct adapter *padapter,
+					unsigned char *da,
+					unsigned short reason);
+#endif /* CONFIG_88EU_AP_MODE */
+
+void rtw_cfg80211_issue_p2p_provision_request(struct adapter *padapter,
+					      const u8 *buf, size_t len);
+void rtw_cfg80211_rx_p2p_action_public(struct adapter *padapter,
+				       u8 *pmgmt_frame, uint frame_len);
+void rtw_cfg80211_rx_action_p2p(struct adapter *padapter, u8 *pmgmt_frame,
+				uint frame_len);
+void rtw_cfg80211_rx_action(struct adapter *adapter, u8 *frame,
+			    uint frame_len, const char *msg);
+
+int rtw_cfg80211_set_mgnt_wpsp2pie(struct net_device *net,
+				   char *buf, int len, int type);
+
+bool rtw_cfg80211_pwr_mgmt(struct adapter *adapter);
+
+#define rtw_cfg80211_rx_mgmt(dev, freq, sig_dbm, buf, len, gfp)		\
+	cfg80211_rx_mgmt(dev, freq, sig_dbm, buf, len, gfp)
+#define rtw_cfg80211_send_rx_assoc(dev, bss, buf, len)			\
+	cfg80211_send_rx_assoc(dev, bss, buf, len)
+
+#endif /* __IOCTL_CFG80211_H__ */

drivers/staging/rtl8188eu/include/ip.h

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef _LINUX_IP_H
+#define _LINUX_IP_H
+
+/* SOL_IP socket options */
+
+#define IPTOS_TOS_MASK		0x1E
+#define IPTOS_TOS(tos)		((tos)&IPTOS_TOS_MASK)
+#define	IPTOS_LOWDELAY		0x10
+#define	IPTOS_THROUGHPUT	0x08
+#define	IPTOS_RELIABILITY	0x04
+#define	IPTOS_MINCOST		0x02
+
+#define IPTOS_PREC_MASK		0xE0
+#define IPTOS_PREC(tos)		((tos)&IPTOS_PREC_MASK)
+#define IPTOS_PREC_NETCONTROL           0xe0
+#define IPTOS_PREC_INTERNETCONTROL      0xc0
+#define IPTOS_PREC_CRITIC_ECP           0xa0
+#define IPTOS_PREC_FLASHOVERRIDE        0x80
+#define IPTOS_PREC_FLASH                0x60
+#define IPTOS_PREC_IMMEDIATE            0x40
+#define IPTOS_PREC_PRIORITY             0x20
+#define IPTOS_PREC_ROUTINE              0x00
+
+
+/* IP options */
+#define IPOPT_COPY		0x80
+#define IPOPT_CLASS_MASK	0x60
+#define IPOPT_NUMBER_MASK	0x1f
+
+#define	IPOPT_COPIED(o)		((o)&IPOPT_COPY)
+#define	IPOPT_CLASS(o)		((o)&IPOPT_CLASS_MASK)
+#define	IPOPT_NUMBER(o)		((o)&IPOPT_NUMBER_MASK)
+
+#define	IPOPT_CONTROL		0x00
+#define	IPOPT_RESERVED1		0x20
+#define	IPOPT_MEASUREMENT	0x40
+#define	IPOPT_RESERVED2		0x60
+
+#define IPOPT_END	(0 | IPOPT_CONTROL)
+#define IPOPT_NOOP	(1 | IPOPT_CONTROL)
+#define IPOPT_SEC	(2 | IPOPT_CONTROL | IPOPT_COPY)
+#define IPOPT_LSRR	(3 | IPOPT_CONTROL | IPOPT_COPY)
+#define IPOPT_TIMESTAMP	(4 | IPOPT_MEASUREMENT)
+#define IPOPT_RR	(7 | IPOPT_CONTROL)
+#define IPOPT_SID	(8 | IPOPT_CONTROL | IPOPT_COPY)
+#define IPOPT_SSRR	(9 | IPOPT_CONTROL | IPOPT_COPY)
+#define IPOPT_RA	(20 | IPOPT_CONTROL | IPOPT_COPY)
+
+#define IPVERSION	4
+#define MAXTTL		255
+#define IPDEFTTL	64
+#define IPOPT_OPTVAL 0
+#define IPOPT_OLEN   1
+#define IPOPT_OFFSET 2
+#define IPOPT_MINOFF 4
+#define MAX_IPOPTLEN 40
+#define IPOPT_NOP IPOPT_NOOP
+#define IPOPT_EOL IPOPT_END
+#define IPOPT_TS  IPOPT_TIMESTAMP
+
+#define	IPOPT_TS_TSONLY		0	/* timestamps only */
+#define	IPOPT_TS_TSANDADDR	1	/* timestamps and addresses */
+#define	IPOPT_TS_PRESPEC	3	/* specified modules only */
+
+struct ip_options {
+	__u32		faddr;			/* Saved first hop address */
+	unsigned char	optlen;
+	unsigned char srr;
+	unsigned char rr;
+	unsigned char ts;
+	unsigned char	is_setbyuser:1,	/* Set by setsockopt?		*/
+			is_data:1,	/* Options in __data, rather than skb*/
+			is_strictroute:1,/* Strict source route		*/
+			srr_is_hit:1,	/* Packet destn addr was ours */
+			is_changed:1,	/* IP checksum more not valid	*/
+			rr_needaddr:1,	/* Need to record addr of out dev*/
+			ts_needtime:1,	/* Need to record timestamp	*/
+			ts_needaddr:1;	/* Need to record addr of out dev  */
+	unsigned char router_alert;
+	unsigned char __pad1;
+	unsigned char __pad2;
+	unsigned char __data[0];
+};
+
+#define optlength(opt) (sizeof(struct ip_options) + opt->optlen)
+
+struct iphdr {
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	__u8	ihl:4,
+		version:4;
+#elif defined(__BIG_ENDIAN_BITFIELD)
+	__u8	version:4,
+		ihl:4;
+#endif
+	__u8	tos;
+	__u16	tot_len;
+	__u16	id;
+	__u16	frag_off;
+	__u8	ttl;
+	__u8	protocol;
+	__u16	check;
+	__u32	saddr;
+	__u32	daddr;
+	/*The options start here. */
+};
+
+#endif	/* _LINUX_IP_H */

drivers/staging/rtl8188eu/include/mlme_osdep.h

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef	__MLME_OSDEP_H_
+#define __MLME_OSDEP_H_
+
+#include <osdep_service.h>
+#include <drv_types.h>
+
+void rtw_init_mlme_timer(struct adapter *padapter);
+void rtw_os_indicate_disconnect(struct adapter *adapter);
+void rtw_os_indicate_connect(struct adapter *adapter);
+void rtw_os_indicate_scan_done(struct adapter *padapter, bool aborted);
+void rtw_report_sec_ie(struct adapter *adapter, u8 authmode, u8 *sec_ie);
+
+void rtw_reset_securitypriv(struct adapter *adapter);
+void indicate_wx_scan_complete_event(struct adapter *padapter);
+
+#endif	/* _MLME_OSDEP_H_ */

drivers/staging/rtl8188eu/include/mp_custom_oid.h

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+#ifndef	__CUSTOM_OID_H
+#define __CUSTOM_OID_H
+
+/*  by Owen */
+/*  0xFF818000 - 0xFF81802F		RTL8180 Mass Production Kit */
+/*  0xFF818500 - 0xFF81850F		RTL8185 Setup Utility */
+/*  0xFF818580 - 0xFF81858F		RTL8185 Phy Status Utility */
+
+/*  */
+
+/*  by Owen for Production Kit */
+/*  For Production Kit with Agilent Equipments */
+/*  in order to make our custom oids hopefully somewhat unique */
+/*  we will use 0xFF (indicating implementation specific OID) */
+/*	81(first byte of non zero Realtek unique identifier) */
+/*	80 (second byte of non zero Realtek unique identifier) */
+/*	XX (the custom OID number - providing 255 possible custom oids) */
+
+#define OID_RT_PRO_RESET_DUT				0xFF818000
+#define OID_RT_PRO_SET_DATA_RATE			0xFF818001
+#define OID_RT_PRO_START_TEST				0xFF818002
+#define OID_RT_PRO_STOP_TEST				0xFF818003
+#define OID_RT_PRO_SET_PREAMBLE				0xFF818004
+#define OID_RT_PRO_SET_SCRAMBLER			0xFF818005
+#define OID_RT_PRO_SET_FILTER_BB			0xFF818006
+#define OID_RT_PRO_SET_MANUAL_DIVERSITY_BB		0xFF818007
+#define OID_RT_PRO_SET_CHANNEL_DIRECT_CALL		0xFF818008
+#define OID_RT_PRO_SET_SLEEP_MODE_DIRECT_CALL		0xFF818009
+#define OID_RT_PRO_SET_WAKE_MODE_DIRECT_CALL		0xFF81800A
+
+#define OID_RT_PRO_SET_TX_ANTENNA_BB			0xFF81800D
+#define OID_RT_PRO_SET_ANTENNA_BB			0xFF81800E
+#define OID_RT_PRO_SET_CR_SCRAMBLER			0xFF81800F
+#define OID_RT_PRO_SET_CR_NEW_FILTER			0xFF818010
+#define OID_RT_PRO_SET_TX_POWER_CONTROL			0xFF818011
+#define OID_RT_PRO_SET_CR_TX_CONFIG			0xFF818012
+#define OID_RT_PRO_GET_TX_POWER_CONTROL			0xFF818013
+#define OID_RT_PRO_GET_CR_SIGNAL_QUALITY		0xFF818014
+#define OID_RT_PRO_SET_CR_SETPOINT			0xFF818015
+#define OID_RT_PRO_SET_INTEGRATOR			0xFF818016
+#define OID_RT_PRO_SET_SIGNAL_QUALITY			0xFF818017
+#define OID_RT_PRO_GET_INTEGRATOR			0xFF818018
+#define OID_RT_PRO_GET_SIGNAL_QUALITY			0xFF818019
+#define OID_RT_PRO_QUERY_EEPROM_TYPE			0xFF81801A
+#define OID_RT_PRO_WRITE_MAC_ADDRESS			0xFF81801B
+#define OID_RT_PRO_READ_MAC_ADDRESS			0xFF81801C
+#define OID_RT_PRO_WRITE_CIS_DATA			0xFF81801D
+#define OID_RT_PRO_READ_CIS_DATA			0xFF81801E
+#define OID_RT_PRO_WRITE_POWER_CONTROL			0xFF81801F
+#define OID_RT_PRO_READ_POWER_CONTROL			0xFF818020
+#define OID_RT_PRO_WRITE_EEPROM				0xFF818021
+#define OID_RT_PRO_READ_EEPROM				0xFF818022
+#define OID_RT_PRO_RESET_TX_PACKET_SENT			0xFF818023
+#define OID_RT_PRO_QUERY_TX_PACKET_SENT			0xFF818024
+#define OID_RT_PRO_RESET_RX_PACKET_RECEIVED		0xFF818025
+#define OID_RT_PRO_QUERY_RX_PACKET_RECEIVED		0xFF818026
+#define OID_RT_PRO_QUERY_RX_PACKET_CRC32_ERROR		0xFF818027
+#define OID_RT_PRO_QUERY_CURRENT_ADDRESS		0xFF818028
+#define OID_RT_PRO_QUERY_PERMANENT_ADDRESS		0xFF818029
+#define OID_RT_PRO_SET_PHILIPS_RF_PARAMETERS		0xFF81802A
+#define OID_RT_PRO_RECEIVE_PACKET			0xFF81802C
+/*  added by Owen on 04/08/03 for Cameo's request */
+#define OID_RT_PRO_WRITE_EEPROM_BYTE			0xFF81802D
+#define OID_RT_PRO_READ_EEPROM_BYTE			0xFF81802E
+#define OID_RT_PRO_SET_MODULATION			0xFF81802F
+/*  */
+
+/* Sean */
+#define OID_RT_DRIVER_OPTION				0xFF818080
+#define OID_RT_RF_OFF					0xFF818081
+#define OID_RT_AUTH_STATUS				0xFF818082
+
+/*  */
+#define OID_RT_PRO_SET_CONTINUOUS_TX			0xFF81800B
+#define OID_RT_PRO_SET_SINGLE_CARRIER_TX		0xFF81800C
+#define OID_RT_PRO_SET_CARRIER_SUPPRESSION_TX		0xFF81802B
+#define OID_RT_PRO_SET_SINGLE_TONE_TX			0xFF818043
+/*  */
+
+
+/*  by Owen for RTL8185 Phy Status Report Utility */
+#define OID_RT_UTILITY_false_ALARM_COUNTERS		0xFF818580
+#define OID_RT_UTILITY_SELECT_DEBUG_MODE		0xFF818581
+#define OID_RT_UTILITY_SELECT_SUBCARRIER_NUMBER		0xFF818582
+#define OID_RT_UTILITY_GET_RSSI_STATUS			0xFF818583
+#define OID_RT_UTILITY_GET_FRAME_DETECTION_STATUS	0xFF818584
+#define OID_RT_UTILITY_GET_AGC_AND_FREQUENCY_OFFSET_ESTIMATION_STATUS	\
+							0xFF818585
+#define OID_RT_UTILITY_GET_CHANNEL_ESTIMATION_STATUS	0xFF818586
+/*  */
+
+/*  by Owen on 03/09/19-03/09/22 for RTL8185 */
+#define OID_RT_WIRELESS_MODE				0xFF818500
+#define OID_RT_SUPPORTED_RATES				0xFF818501
+#define OID_RT_DESIRED_RATES				0xFF818502
+#define OID_RT_WIRELESS_MODE_STARTING_ADHOC		0xFF818503
+/*  */
+
+#define OID_RT_GET_CONNECT_STATE			0xFF030001
+#define OID_RT_RESCAN					0xFF030002
+#define OID_RT_SET_KEY_LENGTH				0xFF030003
+#define OID_RT_SET_DEFAULT_KEY_ID			0xFF030004
+
+#define OID_RT_SET_CHANNEL				0xFF010182
+#define OID_RT_SET_SNIFFER_MODE				0xFF010183
+#define OID_RT_GET_SIGNAL_QUALITY			0xFF010184
+#define OID_RT_GET_SMALL_PACKET_CRC			0xFF010185
+#define OID_RT_GET_MIDDLE_PACKET_CRC			0xFF010186
+#define OID_RT_GET_LARGE_PACKET_CRC			0xFF010187
+#define OID_RT_GET_TX_RETRY				0xFF010188
+#define OID_RT_GET_RX_RETRY				0xFF010189
+#define OID_RT_PRO_SET_FW_DIG_STATE			0xFF01018A/* S */
+#define OID_RT_PRO_SET_FW_RA_STATE			0xFF01018B/* S */
+
+#define OID_RT_GET_RX_TOTAL_PACKET			0xFF010190
+#define OID_RT_GET_TX_BEACON_OK				0xFF010191
+#define OID_RT_GET_TX_BEACON_ERR			0xFF010192
+#define OID_RT_GET_RX_ICV_ERR				0xFF010193
+#define OID_RT_SET_ENCRYPTION_ALGORITHM			0xFF010194
+#define OID_RT_SET_NO_AUTO_RESCAN			0xFF010195
+#define OID_RT_GET_PREAMBLE_MODE			0xFF010196
+#define OID_RT_GET_DRIVER_UP_DELTA_TIME			0xFF010197
+#define OID_RT_GET_AP_IP				0xFF010198
+#define OID_RT_GET_CHANNELPLAN				0xFF010199
+#define OID_RT_SET_PREAMBLE_MODE			0xFF01019A
+#define OID_RT_SET_BCN_INTVL				0xFF01019B
+#define OID_RT_GET_RF_VENDER				0xFF01019C
+#define OID_RT_DEDICATE_PROBE				0xFF01019D
+#define OID_RT_PRO_RX_FILTER_PATTERN			0xFF01019E
+
+#define OID_RT_GET_DCST_CURRENT_THRESHOLD		0xFF01019F
+
+#define OID_RT_GET_CCA_ERR				0xFF0101A0
+#define OID_RT_GET_CCA_UPGRADE_THRESHOLD		0xFF0101A1
+#define OID_RT_GET_CCA_FALLBACK_THRESHOLD		0xFF0101A2
+
+#define OID_RT_GET_CCA_UPGRADE_EVALUATE_TIMES		0xFF0101A3
+#define OID_RT_GET_CCA_FALLBACK_EVALUATE_TIMES		0xFF0101A4
+
+/*  by Owen on 03/31/03 for Cameo's request */
+#define OID_RT_SET_RATE_ADAPTIVE			0xFF0101A5
+/*  */
+#define OID_RT_GET_DCST_EVALUATE_PERIOD			0xFF0101A5
+#define OID_RT_GET_DCST_TIME_UNIT_INDEX			0xFF0101A6
+#define OID_RT_GET_TOTAL_TX_BYTES			0xFF0101A7
+#define OID_RT_GET_TOTAL_RX_BYTES			0xFF0101A8
+#define OID_RT_CURRENT_TX_POWER_LEVEL			0xFF0101A9
+#define OID_RT_GET_ENC_KEY_MISMATCH_COUNT		0xFF0101AA
+#define OID_RT_GET_ENC_KEY_MATCH_COUNT			0xFF0101AB
+#define OID_RT_GET_CHANNEL				0xFF0101AC
+
+#define OID_RT_SET_CHANNELPLAN				0xFF0101AD
+#define OID_RT_GET_HARDWARE_RADIO_OFF			0xFF0101AE
+#define OID_RT_CHANNELPLAN_BY_COUNTRY			0xFF0101AF
+#define OID_RT_SCAN_AVAILABLE_BSSID			0xFF0101B0
+#define OID_RT_GET_HARDWARE_VERSION			0xFF0101B1
+#define OID_RT_GET_IS_ROAMING				0xFF0101B2
+#define OID_RT_GET_IS_PRIVACY				0xFF0101B3
+#define OID_RT_GET_KEY_MISMATCH				0xFF0101B4
+#define OID_RT_SET_RSSI_ROAM_TRAFFIC_TH			0xFF0101B5
+#define OID_RT_SET_RSSI_ROAM_SIGNAL_TH			0xFF0101B6
+#define OID_RT_RESET_LOG				0xFF0101B7
+#define OID_RT_GET_LOG					0xFF0101B8
+#define OID_RT_SET_INDICATE_HIDDEN_AP			0xFF0101B9
+#define OID_RT_GET_HEADER_FAIL				0xFF0101BA
+#define OID_RT_SUPPORTED_WIRELESS_MODE			0xFF0101BB
+#define OID_RT_GET_CHANNEL_LIST				0xFF0101BC
+#define OID_RT_GET_SCAN_IN_PROGRESS			0xFF0101BD
+#define OID_RT_GET_TX_INFO				0xFF0101BE
+#define OID_RT_RF_READ_WRITE_OFFSET			0xFF0101BF
+#define OID_RT_RF_READ_WRITE				0xFF0101C0
+
+/*  For Netgear request. 2005.01.13, by rcnjko. */
+#define OID_RT_FORCED_DATA_RATE				0xFF0101C1
+#define OID_RT_WIRELESS_MODE_FOR_SCAN_LIST		0xFF0101C2
+/*  For Netgear request. 2005.02.17, by rcnjko. */
+#define OID_RT_GET_BSS_WIRELESS_MODE			0xFF0101C3
+/*  For AZ project. 2005.06.27, by rcnjko. */
+#define OID_RT_SCAN_WITH_MAGIC_PACKET			0xFF0101C4
+
+/*  Vincent 8185MP */
+#define OID_RT_PRO_RX_FILTER				0xFF0111C0
+
+#define OID_CE_USB_WRITE_REGISTRY			0xFF0111C1
+#define OID_CE_USB_READ_REGISTRY			0xFF0111C2
+
+#define OID_RT_PRO_SET_INITIAL_GA			0xFF0111C3
+#define OID_RT_PRO_SET_BB_RF_STANDBY_MODE		0xFF0111C4
+#define OID_RT_PRO_SET_BB_RF_SHUTDOWN_MODE		0xFF0111C5
+#define OID_RT_PRO_SET_TX_CHARGE_PUMP			0xFF0111C6
+#define OID_RT_PRO_SET_RX_CHARGE_PUMP			0xFF0111C7
+#define OID_RT_PRO_RF_WRITE_REGISTRY			0xFF0111C8
+#define OID_RT_PRO_RF_READ_REGISTRY			0xFF0111C9
+#define OID_RT_PRO_QUERY_RF_TYPE			0xFF0111CA
+
+/*  AP OID */
+#define OID_RT_AP_GET_ASSOCIATED_STATION_LIST		0xFF010300
+#define OID_RT_AP_GET_CURRENT_TIME_STAMP		0xFF010301
+#define OID_RT_AP_SWITCH_INTO_AP_MODE			0xFF010302
+#define OID_RT_AP_SET_DTIM_PERIOD			0xFF010303
+/*  Determine if driver supports AP mode. */
+#define OID_RT_AP_SUPPORTED				0xFF010304
+/*  Set WPA-PSK passphrase into authenticator. */
+#define OID_RT_AP_SET_PASSPHRASE			0xFF010305
+
+/*  8187MP. 2004.09.06, by rcnjko. */
+#define OID_RT_PRO8187_WI_POLL				0xFF818780
+#define OID_RT_PRO_WRITE_BB_REG				0xFF818781
+#define OID_RT_PRO_READ_BB_REG				0xFF818782
+#define OID_RT_PRO_WRITE_RF_REG				0xFF818783
+#define OID_RT_PRO_READ_RF_REG				0xFF818784
+
+/*  Meeting House. added by Annie, 2005-07-20. */
+#define OID_RT_MH_VENDER_ID				0xFFEDC100
+
+/* 8711 MP OID added 20051230. */
+#define OID_RT_PRO8711_JOIN_BSS				0xFF871100/* S */
+
+#define OID_RT_PRO_READ_REGISTER			0xFF871101 /* Q */
+#define OID_RT_PRO_WRITE_REGISTER			0xFF871102 /* S */
+
+#define OID_RT_PRO_BURST_READ_REGISTER			0xFF871103 /* Q */
+#define OID_RT_PRO_BURST_WRITE_REGISTER			0xFF871104 /* S */
+
+#define OID_RT_PRO_WRITE_TXCMD				0xFF871105 /* S */
+
+#define OID_RT_PRO_READ16_EEPROM			0xFF871106 /* Q */
+#define OID_RT_PRO_WRITE16_EEPROM			0xFF871107 /* S */
+
+#define OID_RT_PRO_H2C_SET_COMMAND			0xFF871108 /* S */
+#define OID_RT_PRO_H2C_QUERY_RESULT			0xFF871109 /* Q */
+
+#define OID_RT_PRO8711_WI_POLL				0xFF87110A /* Q */
+#define OID_RT_PRO8711_PKT_LOSS				0xFF87110B /* Q */
+#define OID_RT_RD_ATTRIB_MEM				0xFF87110C/* Q */
+#define OID_RT_WR_ATTRIB_MEM				0xFF87110D/* S */
+
+
+/* Method 2 for H2C/C2H */
+#define OID_RT_PRO_H2C_CMD_MODE				0xFF871110 /* S */
+#define OID_RT_PRO_H2C_CMD_RSP_MODE			0xFF871111 /* Q */
+#define OID_RT_PRO_H2C_CMD_EVENT_MODE			0xFF871112 /* S */
+#define OID_RT_PRO_WAIT_C2H_EVENT			0xFF871113 /* Q */
+#define OID_RT_PRO_RW_ACCESS_PROTOCOL_TEST		0xFF871114/* Q */
+
+#define OID_RT_PRO_SCSI_ACCESS_TEST			0xFF871115 /* Q, S */
+
+#define OID_RT_PRO_SCSI_TCPIPOFFLOAD_OUT		0xFF871116 /* S */
+#define OID_RT_PRO_SCSI_TCPIPOFFLOAD_IN			0xFF871117 /* Q,S */
+#define OID_RT_RRO_RX_PKT_VIA_IOCTRL			0xFF871118 /* Q */
+#define OID_RT_RRO_RX_PKTARRAY_VIA_IOCTRL		0xFF871119 /* Q */
+
+#define OID_RT_RPO_SET_PWRMGT_TEST			0xFF87111A /* S */
+#define OID_RT_PRO_QRY_PWRMGT_TEST			0XFF87111B /* Q */
+#define OID_RT_RPO_ASYNC_RWIO_TEST			0xFF87111C /* S */
+#define OID_RT_RPO_ASYNC_RWIO_POLL			0xFF87111D /* Q */
+#define OID_RT_PRO_SET_RF_INTFS				0xFF87111E /* S */
+#define OID_RT_POLL_RX_STATUS				0xFF87111F /* Q */
+
+#define OID_RT_PRO_CFG_DEBUG_MESSAGE			0xFF871120 /* Q,S */
+#define OID_RT_PRO_SET_DATA_RATE_EX			0xFF871121/* S */
+#define OID_RT_PRO_SET_BASIC_RATE			0xFF871122/* S */
+#define OID_RT_PRO_READ_TSSI				0xFF871123/* S */
+#define OID_RT_PRO_SET_POWER_TRACKING			0xFF871124/* S */
+
+
+#define OID_RT_PRO_QRY_PWRSTATE				0xFF871150 /* Q */
+#define OID_RT_PRO_SET_PWRSTATE				0xFF871151 /* S */
+
+/* Method 2 , using workitem */
+#define OID_RT_SET_READ_REG				0xFF871181 /* S */
+#define OID_RT_SET_WRITE_REG				0xFF871182 /* S */
+#define OID_RT_SET_BURST_READ_REG			0xFF871183 /* S */
+#define OID_RT_SET_BURST_WRITE_REG			0xFF871184 /* S */
+#define OID_RT_SET_WRITE_TXCMD				0xFF871185 /* S */
+#define OID_RT_SET_READ16_EEPROM			0xFF871186 /* S */
+#define OID_RT_SET_WRITE16_EEPROM			0xFF871187 /* S */
+#define OID_RT_QRY_POLL_WKITEM				0xFF871188 /* Q */
+
+/* For SDIO INTERFACE only */
+#define OID_RT_PRO_SYNCPAGERW_SRAM			0xFF8711A0 /* Q, S */
+#define OID_RT_PRO_871X_DRV_EXT				0xFF8711A1
+
+/* For USB INTERFACE only */
+#define OID_RT_PRO_USB_VENDOR_REQ			0xFF8711B0 /* Q, S */
+#define OID_RT_PRO_SCSI_AUTO_TEST			0xFF8711B1 /* S */
+#define OID_RT_PRO_USB_MAC_AC_FIFO_WRITE		0xFF8711B2 /* S */
+#define OID_RT_PRO_USB_MAC_RX_FIFO_READ			0xFF8711B3 /* Q */
+#define OID_RT_PRO_USB_MAC_RX_FIFO_POLLING		0xFF8711B4 /* Q */
+
+#define OID_RT_PRO_H2C_SET_RATE_TABLE			0xFF8711FB /* S */
+#define OID_RT_PRO_H2C_GET_RATE_TABLE			0xFF8711FC /* S */
+#define OID_RT_PRO_H2C_C2H_LBK_TEST			0xFF8711FE
+
+#define OID_RT_PRO_ENCRYPTION_CTRL			0xFF871200 /* Q, S */
+#define OID_RT_PRO_ADD_STA_INFO				0xFF871201 /* S */
+#define OID_RT_PRO_DELE_STA_INFO			0xFF871202 /* S */
+#define OID_RT_PRO_QUERY_DR_VARIABLE			0xFF871203 /* Q */
+
+#define OID_RT_PRO_RX_PACKET_TYPE			0xFF871204 /* Q, S */
+
+#define OID_RT_PRO_READ_EFUSE				0xFF871205 /* Q */
+#define OID_RT_PRO_WRITE_EFUSE				0xFF871206 /* S */
+#define OID_RT_PRO_RW_EFUSE_PGPKT			0xFF871207 /* Q, S */
+#define OID_RT_GET_EFUSE_CURRENT_SIZE			0xFF871208 /* Q */
+
+#define OID_RT_SET_BANDWIDTH				0xFF871209 /* S */
+#define OID_RT_SET_CRYSTAL_CAP				0xFF87120A /* S */
+
+#define OID_RT_SET_RX_PACKET_TYPE			0xFF87120B /* S */
+
+#define OID_RT_GET_EFUSE_MAX_SIZE			0xFF87120C /* Q */
+
+#define OID_RT_PRO_SET_TX_AGC_OFFSET			0xFF87120D /* S */
+
+#define OID_RT_PRO_SET_PKT_TEST_MODE			0xFF87120E /* S */
+
+#define OID_RT_PRO_FOR_EVM_TEST_SETTING			0xFF87120F /* S */
+
+#define OID_RT_PRO_GET_THERMAL_METER			0xFF871210 /* Q */
+
+#define OID_RT_RESET_PHY_RX_PACKET_COUNT		0xFF871211 /* S */
+#define OID_RT_GET_PHY_RX_PACKET_RECEIVED		0xFF871212 /* Q */
+#define OID_RT_GET_PHY_RX_PACKET_CRC32_ERROR		0xFF871213 /* Q */
+
+#define OID_RT_SET_POWER_DOWN				0xFF871214 /* S */
+
+#define OID_RT_GET_POWER_MODE				0xFF871215 /* Q */
+
+#define OID_RT_PRO_EFUSE				0xFF871216 /* Q, S */
+#define OID_RT_PRO_EFUSE_MAP				0xFF871217 /* Q, S */
+
+#endif /* ifndef	__CUSTOM_OID_H */

drivers/staging/rtl8188eu/include/nic_spec.h

+/******************************************************************************
+ *
+ * Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ *
+ ******************************************************************************/
+
+
+#ifndef __NIC_SPEC_H__
+#define __NIC_SPEC_H__
+
+#define RTL8711_MCTRL_		(0x20000)
+#define RTL8711_UART_		(0x30000)
+#define RTL8711_TIMER_		(0x40000)
+#define RTL8711_FINT_		(0x50000)
+#define RTL8711_HINT_		(0x50000)
+#define RTL8711_GPIO_		(0x60000)
+#define RTL8711_WLANCTRL_	(0x200000)
+#define RTL8711_WLANFF_		(0xe00000)
+#define RTL8711_HCICTRL_	(0x600000)
+#define RTL8711_SYSCFG_		(0x620000)
+#define RTL8711_SYSCTRL_	(0x620000)
+#define RTL8711_MCCTRL_		(0x020000)
+
+
+#include <rtl8711_regdef.h>
+
+#include <rtl8711_bitdef.h>
+
+
+#endif /*  __RTL8711_SPEC_H__ */